Suitability of high pressure-homogenized milk for the production of probiotic fermented milk containing Lactobacillus paracasei and Lactobacillus acidophilus

Effect of oleaster (Elaeagnus angustifolia L.) flour addition combined with high-pressure homogenization on the acidification kinetics, physicochemical, functional, and rheological properties of kefir

In this study, the effects of peeled oleaster flour (OF) addition (0.5% and 1%) with high-pressure homogenization (HPH) at 100 MPa on acidification kinetics, physicochemical, functional, and rheological properties of kefir made from bovine whole milk were investigated. The fermentation kinetic parameters such as Vmax and T f decreased by 23.63% and 20%, respectively, with 1% OF and application of HPH. The combined use of two treatments had a positive effect on Lactobacillus and Lactococcus counts, reaching a maximum of 9.63 and 9.31 log cfu/mL, respectively. Also, total phenolic contents and antioxidant activity reached maximum values of 85.31 mg GAE/g and 17.22%, respectively. The ΔE value was more limited with HPH. The maximum firmness and water-holding capacity values were determined in the sample produced with 1% OF and application of HPH. Rheological analysis revealed that all kefirs exhibited shear thinning behavior, and the Ostwald-de-Waele (R 2 > .99) model was suitable to describe the rheological behavior of all kefir samples. The highest viscosity (0.049 Pa.s, at 50/s shear rate) and consistency index (1.115 Pa.sn) were observed in kefir with 1% OF and application of HPH. Kefir samples were characterized as weak gel behavior because storage modulus (G') was much greater than loss modulus (G") and the power-law model was used to characterize the viscoelasticity. The overall quality assessment indicated that the improvement of the fermentation process and the enhancement of textural and functional properties of kefir samples could be achieved with the addition of 1% OF and application of HPH.

Effects of Sub-Lethal High Pressure Homogenization Treatment on the Adhesion Mechanisms and Stress Response Genes in Lactobacillus acidophilus 08

Cell surface hydrophobicity (CSH) and adhesion are very important phenotypical traits for probiotics that confer them a competitive advantage for the resilience in the human gastrointestinal tract. This study was aimed to understand the effects over time of a 50 MPa hyperbaric treatment on the surface properties of Lactobacillus acidophilus 08 including CSH, autoaggregation, and in vitro adhesion (mucin layer and Caco-2 cells). Moreover, a link between the hurdle applied and the expression of genes involved in the general stress response (groEL and clpP) and adhesion processes (efTu and slpA) was evaluated. High pressure homogenization (HPH) at 50 MPa significantly increased the CSH percentage (H%), autoaggregation and in vitro adhesion on mucin of L. acidophilus 08 cells compared with the untreated cells. Moreover, the hyperbaric hurdle induced an upregulation of the stress response genes groEL and ef-TU together with a down regulation of the clpP and S-layer slpA genes. Looking at the protein profile, HPH-treatment showed an increase in the number or intensity of protein bands at high and low molecular weights.

Anti-Cancer Effects of Probiotic Lactobacillus acidophilus for Colorectal Cancer Cell Line Caco-2 through Apoptosis Induction

Background: Colorectal cancer is one of the most common cancers worldwide. Probiotics are useful and non-pathogenic microorganisms in the gastrointestinal tract, which can show anticancer activity through the induction of apoptosis. This study aimed to evaluate the antiproliferative effects of Lactobacillus acidophilus probiotic on the Caco-2 colorectal cancer cell line. Methods: The supernatant (secreted metabolites) and bacterial extract of L. acidophilus probiotics were prepared and used as an anti-proliferative agent on the colorectal cancer cell line, Caco-2 in vitro. The effects of supernatant and extract of L. acidophilus were evaluated on the viability and proliferation of cancer cells using MTT assay. Moreover, morphological alterations of cancer cells treated with supernatant and extract of L. acidophilus were evaluated by an inverted phase contrast microscope. The mRNA expression levels of apoptosis-related genes (SURVIVIN and SMAC) in treated cancer cells and untreated controls were evaluated using the Real-Time PCR method. Results: The results showed that the supernatant and extract of L. acidophilus inhibited the viability and proliferation of cancer cells in a dose and time-dependent manner. Moreover, various morphological alterations were observed in the treated cancer cells, which are indicators of apoptosis induction. The mRNA expression of SURVIVIN and SMAC genes were significantly up-regulated and downregulated in the treated cancer cells, respectively. Conclusion: The results of the present study suggested that the supernatant and extract of L.acidophilus could inhibit the viability and proliferation of colorectal cancer cell line, Caco-2through induction of apoptosis, increase the survival rate of colon cancer patients.

Two Nonthermal Technologies for Food Safety and Quality-Ultrasound and High Pressure Homogenization: Effects on Microorganisms, Advances, and Possibilities: A Review

Some nonthermal technologies have gained special interest as alternative approaches to thermal treatments. High pressure homogenization (HPH) and ultrasound (US) are two of the most promising approaches. They rely upon two different modes of action, although they share some mechanisms or ways of actions (mechanic burden against cells, cavitation and micronization, primary targets being the cell wall and the membrane, temperature and pressure playing important roles for their antimicrobial potential, and their effect on cells can be either positive or negative). HPH is generally used in milk and dairy products to break lipid micelles, whereas US is used for mixing and/or to obtain active compounds of food. HPH and US have been tested on pathogens and spoilers with different effects; thus, the main goal of this article is to describe how US and HPH act on biological systems, with a focus on antimicrobial activity, mode of action, positive effects, and equipment. The article is composed of three main parts: (i) an overview of US and HPH, with a focus on some results covered by other reviews (mode of action toward microorganisms and effect on enzymes) and some new data (positive effect and modulation of metabolism); (ii) a tentative approach for a comparative resistance of microorganisms; and (iii) future perspectives.

(Ultra) High Pressure Homogenization Potential on the Shelf-Life and Functionality of Kiwifruit Juice

The increasing competition within the food industry sector makes the requisite of innovation in processes and products essential, leading to focus the interest on the application of new processing technologies including high pressure homogenization (HPH) and ultra high pressure homogenization (UHPH). In this context, the present research aimed at evaluating the effects of two UHPH treatments performed at 200 MPa for 2 and 3 cycles on quality and functionality of organic kiwifruit juice stored at three different temperatures, i.e., 5, 15, and 25°C. The results showed that only the treatment performed at 200 MPa for 3 cycles was able to significantly increase the shelf-life of organic kiwifruit juices when stored at refrigeration temperature, avoiding also phase separation that occurred in the sample treated at 0.1 MPa (control) after 20 days of refrigerated storage. The obtained data showed also that the highest applied pressure was able to increase some quality parameters of the juice such as viscosity and luminosity (L^∗) and increased the availability of total phenol content consequently enhancing the juice total antioxidant activity. The application of a treatment at 200 MPa for 3 cycles allowed to obtain a stable kiwifruit juice for more than 40 days under refrigerated storage. A challenge to implement this technology in food process as full alternative to thermal treatment could be represented by the adoption of pressure level up to 400 MPa followed by the packaging in aseptic conditions.

Microencapsulation of functional strains by high pressure homogenization for a potential use in fermented milk

This study was aimed to evaluate the potential of high pressure homogenization for the microencapsulation of two probiotic lactic acid bacteria, Lactobacillus paracasei A13 and Lactobacillus salivarius subsp. salivarius CET 4063 to produce functional fermented milks. Microcapsules of the considered functional microorganisms were obtained by HPH treatments at 50MPa in the presence of sodium alginate and vegetable oil. The microencapsulated microorganisms were then inoculated as adjuncts to produce fermented milks. As controls were used fermented milks in which the two probiotic lactobacilli were inoculated without encapsulation. The viability of the strains was monitored during almost 2months of refrigerated storage. The survival of lactic acid bacteria after the gastric-duodenal simulated test was determined. Fermented milk texture parameters, the presence of exo-polysaccharides and the production of volatile molecules were also evaluated over storage. The microcapsules, for both the considered probiotic strains, were homogeneous and with a size<100μM and therefore did not adversely affect the sensory properties of the fermented milks. The encapsulation decreased the hyperacidity phenomena generally related to the inclusion of probiotic microorganisms in fermented milks. The lower acidity of the products due to the microencapsulation was fundamental for the improvement of the viability of the starter culture and the sensory characteristics of the products. The microencapsulation conditions increased the resistance to the simulated digestion processes, although the strain Lb. paracasei A13 generally showed a higher resistance to the gastric barrier respect to Lb. salivarius CECT 4063. By contrast, the data obtained showed a reduction of EPS production by the microencapsulation. The volatile profiles showed specific profiles in relation to the probiotic strain used and microencapsulation process. In conclusion, the results of this study underlined the applicative potential of HPH microencapsulation of probiotic microorganisms to produce fermented milk with improved functionality and with enhanced sensory properties.

Production of a Functional Fresh Cheese Enriched with the Probiotic Strain Lb. Plantarum T571 Isolated From Traditional Greek Product

The aim of the study was the production of fresh cheese with enhanced quality, standardized characteristics and increased functional and nutritional value. The main idea was to produce probiotic cheese with the use of probiotic bacteria isolated from the microflora of traditional Greek products. For this reason, fresh cheese was produced according to the traditional method (control) and the probiotic strain Lb. plantarum T571 was also added as co-culture (probiotic). All samples were inoculated with L. monocytogenes (3 strains) of 3 log CFU/g initial inoculum level. Microbiological analysis occured during cheese production and until the end of the shelf life of the product stored at 4°C under vacuum packaging. pH, water activity (aW) and titratable acidity were also monitored along with the sensory analysis of the product. The survival of probiotic and Listeria strains was assessed by Pulsed Field Gel Electrophoresis (PFGE). Results showed that on the 1st day of manufacture the population levels of lab exceeded 8 log CFU/g for all inoculated samples. By the end of shelf life, the population levels of lab in probiotic samples were approximately 7.5 log CFU/g. However, the probiotic samples resulted to significantly higher acidity, lower pH and reduced counts of coliforms and Listeria spp. The quality characteristics of probiotic products compared with the control ones were better according to the test panel. Regarding the PFGE results, Lb. plantarum T571 strain was found in all cases at populations above 7 log CFU/g. Although further research is needed, the results of the current study were encouraging for producing a probiotic fresh cheese with high added value and increased safety levels.

Gut Microbiota Profiling: Metabolomics Based Approach to Unravel Compounds Affecting Human Health

The gut microbiota is composed of a huge number of different bacteria, that produce a large amount of compounds playing a key role in microbe selection and in the construction of a metabolic signaling network. The microbial activities are affected by environmental stimuli leading to the generation of a wide number of compounds, that influence the host metabolome and human health. Indeed, metabolite profiles related to the gut microbiota can offer deep insights on the impact of lifestyle and dietary factors on chronic and acute diseases. Metagenomics, metaproteomics and metabolomics are some of the meta-omics approaches to study the modulation of the gut microbiota. Metabolomic research applied to biofluids allows to: define the metabolic profile; identify and quantify classes and compounds of interest; characterize small molecules produced by intestinal microbes; and define the biochemical pathways of metabolites. Mass spectrometry and nuclear magnetic resonance spectroscopy are the principal technologies applied to metabolomics in terms of coverage, sensitivity and quantification. Moreover, the use of biostatistics and mathematical approaches coupled with metabolomics play a key role in the extraction of biologically meaningful information from wide datasets. Metabolomic studies in gut microbiota-related research have increased, focusing on the generation of novel biomarkers, which could lead to the development of mechanistic hypotheses potentially applicable to the development of nutritional and personalized therapies.

Gut Microbiota Profiling: Metabolomics Based Approach to Unravel Compounds Affecting Human Health

The gut microbiota is composed of a huge number of different bacteria, that produce a large amount of compounds playing a key role in microbe selection and in the construction of a metabolic signaling network. The microbial activities are affected by environmental stimuli leading to the generation of a wide number of compounds, that influence the host metabolome and human health. Indeed, metabolite profiles related to the gut microbiota can offer deep insights on the impact of lifestyle and dietary factors on chronic and acute diseases. Metagenomics, metaproteomics and metabolomics are some of the meta-omics approaches to study the modulation of the gut microbiota. Metabolomic research applied to biofluids allows to: define the metabolic profile; identify and quantify classes and compounds of interest; characterize small molecules produced by intestinal microbes; and define the biochemical pathways of metabolites. Mass spectrometry and nuclear magnetic resonance spectroscopy are the principal technologies applied to metabolomics in terms of coverage, sensitivity and quantification. Moreover, the use of biostatistics and mathematical approaches coupled with metabolomics play a key role in the extraction of biologically meaningful information from wide datasets. Metabolomic studies in gut microbiota-related research have increased, focusing on the generation of novel biomarkers, which could lead to the development of mechanistic hypotheses potentially applicable to the development of nutritional and personalized therapies.

Applications of High and Ultra High Pressure Homogenization for Food Safety

Traditionally, the shelf-life and safety of foods have been achieved by thermal processing. Low temperature long time and high temperature short time treatments are the most commonly used hurdles for the pasteurization of fluid foods and raw materials. However, the thermal treatments can reduce the product quality and freshness. Consequently, some non-thermal pasteurization process have been proposed during the last decades, including high hydrostatic pressure, pulsed electric field, ultrasound (US), and high pressure homogenization (HPH). This last technique has been demonstrated to have a great potential to provide “fresh-like” products with prolonged shelf-life. Moreover, the recent developments in high-pressure-homogenization technology and the design of new homogenization valves able to withstand pressures up to 350–400 MPa have opened new opportunities to homogenization processing in the food industries and, consequently, permitted the development of new products differentiated from traditional ones by sensory and structural characteristics or functional properties. For this, this review deals with the principal mechanisms of action of HPH against microorganisms of food concern in relation to the adopted homogenizer and process parameters. In addition, the effects of homogenization on foodborne pathogenic species inactivation in relation to the food matrix and food chemico-physical and process variables will be reviewed. Also the combined use of this alternative technology with other non-thermal technologies will be considered.

Gut Microbiota Profiling: Metabolomics Based Approach to Unravel Compounds Affecting Human Health

The gut microbiota is composed of a huge number of different bacteria, that produce a large amount of compounds playing a key role in microbe selection and in the construction of a metabolic signaling network. The microbial activities are affected by environmental stimuli leading to the generation of a wide number of compounds, that influence the host metabolome and human health. Indeed, metabolite profiles related to the gut microbiota can offer deep insights on the impact of lifestyle and dietary factors on chronic and acute diseases. Metagenomics, metaproteomics and metabolomics are some of the meta-omics approaches to study the modulation of the gut microbiota. Metabolomic research applied to biofluids allows to: define the metabolic profile; identify and quantify classes and compounds of interest; characterize small molecules produced by intestinal microbes; and define the biochemical pathways of metabolites. Mass spectrometry and nuclear magnetic resonance spectroscopy are the principal technologies applied to metabolomics in terms of coverage, sensitivity and quantification. Moreover, the use of biostatistics and mathematical approaches coupled with metabolomics play a key role in the extraction of biologically meaningful information from wide datasets. Metabolomic studies in gut microbiota-related research have increased, focusing on the generation of novel biomarkers, which could lead to the development of mechanistic hypotheses potentially applicable to the development of nutritional and personalized therapies.

Effects of sub-lethal high-pressure homogenization treatment on the outermost cellular structures and the volatile-molecule profiles of two strains of probiotic lactobacilli

Applying sub-lethal levels of high-pressure homogenization (HPH) to lactic acid bacteria has been proposed as a method of enhancing some of their functional properties. Because the principal targets of HPH are the cell-surface structures, the aim of this study was to examine the effect of sub-lethal HPH treatment on the outermost cellular structures and the proteomic profiles of two known probiotic bacterial strains. Moreover, the effect of HPH treatment on the metabolism of probiotic cells within a dairy product during its refrigerated storage was investigated using SPME-GC-MS. Transmission electron microscopy was used to examine the microstructural changes in the outermost cellular structures due to HPH treatment. These alterations may be involved in the changes in some of the technological and functional properties of the strains that were observed after pressure treatment. Moreover, the proteomic profiles of the probiotic strains treated with HPH and incubated at 37°C for various periods showed different peptide patterns compared with those of the untreated cells. In addition, there were differences in the peaks that were observed in the low-mass spectral region (2000–3000 Da) of the spectral profiles of the control and treated samples. Due to pressure treatment, the volatile-molecule profiles of buttermilk inoculated with treated or control cells and stored at 4°C for 30 days exhibited overall changes in the aroma profile and in the production of molecules that improved its sensory profile, although the two different species imparted specific fingerprints to the product. The results of this study will contribute to understanding the changes that occur in the outermost cellular structures and the metabolism of LAB in response to HPH treatment. The findings of this investigation may contribute to elucidating the relationships between these changes and the alterations of the technological and functional properties of LAB induced by pressure treatment.

High pressure homogenization versus heat treatment: effect on survival, growth, and metabolism of dairy Leuconostoc strains

The effect of high pressure homogenization (HPH) with respect to a traditional heat treatment on the inactivation, growth at 8°C after treatments, and volatile profile of adventitious Leuconostoc strains isolated from Cremoso Argentino spoiled cheeses and ingredients used for their manufacture was evaluated. Most Leuconostoc strains revealed elevated resistance to HPH (eight passes, 100 MPa), especially when resuspended in skim milk. Heat treatment was more efficient than HPH in inactivating Leuconostoc cells at the three initial levels tested. The levels of alcohols and sulfur compounds increased during incubation at 8°C in HPH-treated samples, while the highest amounts of aldehydes and ketones characterized were in heated samples. Leuconostoc cells resuspended in skim milk and subjected to one single-pass HPH treatment using an industrial-scale machine showed remarkable reductions in viable cell counts only when 300 and 400 MPa were applied. However, the cell counts of treated samples rose rapidly after only 5 days of storage at 8°C. The Leuconostoc strains tested in this work were highly resistant to the inactivation treatments applied. Neither HPH nor heat treatment assured their total destruction, even though they were more sensitive to the thermal treatment. To enhance the inhibitory effect on Leuconostoc cells, HPH should be combined with a mild heat treatment, which in addition to efficient microbial inactivation, could allow maximal retention of the physicochemical properties of the product.

Effect of a non-lethal High Pressure Homogenization treatment on the in vivo response of probiotic lactobacilli

Low levels of High Pressure of Homogenization (HPH) can be applied directly to lactic acid bacteria cells in order to enhance some functional properties. In a previous work we observed that a 50 MPa HPH treatment increased Lactobacillus paracasei A13 hydrophobicity and resistance to simulated gastric digestion. The aim of this work was to assess the in vivo effects of HPH treatment applied to probiotic lactobacilli on their interaction capacity with the gut and on their ability to induce IgA cell proliferation in mice intestine. BALB/c mice received FITC-labelled cultures of strains, previously treated or not (control) at 50 MPa. Fluorescently labelled cells were studied in the intestine of animals sacrificed 10 and 30 min after intragastric intubation. HPH-treated and control cultures of each strain were orally administered to mice for 2, 5 or 7 consecutive days. The number of IgA-producing cells in the gut was studied by immunohistochemistry. HPH treated probiotic lactobacilli modified their interaction with the small intestine. HPH-treated cells induced a higher IgA response compared to untreated ones, in a strain- and feeding period-dependent way. HPH treatment could increase some in vivo functional characteristics of probiotic strains, highlighting the potential of this technique for the development of probiotic cultures.

Cell viability and functionality of probiotic bacteria in dairy products

Probiotic bacteria, according to the definition adopted by the World Health Organization in 2002, are live microorganisms, which when administered in adequate amounts confer a health benefit to the host. Recent studies show that the same probiotic strain produced and/or preserved under different storage conditions, may present different responses regarding their susceptibility to the adverse conditions of the gastrointestinal tract, its capacity to adhere to the intestinal epithelium, or its immunomodulating capacity, the functionality being affected without changes in cell viability. This could imply that the control of cell viability is not always enough to guarantee the functionality (probiotic capacity) of a strain. Therefore, a new challenge arises for food technologists and microbiologists when it comes to designing and monitoring probiotic food: to be able to monitor the functionality of a probiotic microorganism throughout all the stages the strain goes through from the moment it is produced and included in the food vehicle, until the moment of consumption. Conventional methodological tools or others still to be developed must be used. The application of cell membrane functionality markers, the use of tests of resistance to intestinal barriers, the study of surface properties and the application of in vivo models come together as complementary tools to assess the actual capacity of a probiotic organism in a specific food, to exert functional effects regardless of the number of viable cells present at the moment of consumption.