Effect of dairy powders fortification on yogurt textural and sensorial properties: a review

Characteristics of the Mixed Yogurt Fermented from Cow-Soy Milk in the Presence of Transglutaminase

The mixed yogurt was fermented from Cow-Soy milk and modified by transglutaminase (TG). The effects of mixed milk and TG on the quality characteristics of mixed yogurt were investigated by texture characteristics, rheology (rheometer) and structure (scanning electron microscopy). The findings revealed that the mixed yogurt with 50% cow milk exhibited lower hardness, viscosity and consistency. Furthermore, when TG was added, the yogurt showed better rheological properties, sensory score and a more stable microstructure. Compared with the samples without TG modification, the viscosity and cohesiveness of the modified samples increased by 10% and 100%, respectively. The combination of cow milk and soy milk improved the texture of yogurt, and the TG addition further improved the physicochemical properties of yogurt. This finding provided a meaningful reference for the development of mixed yogurt with a suitable taste from animal and plant milk, and laid a basis for the practical application of mixed yogurt in the dairy industry, which will meet the requirements for dairy products for consumers in future.

Replacement of milk fat by rapeseed oil stabilised emulsion in commercial yogurt

The incorporation of lipid droplets and further characterization of matrices within dairy products may be possible using such adjacent particles as protein complexes/lipids. Among the range of varied emulsions and their functionalities, great attention has recently focused on the fabrication of high internal phase types. Feasibly, stable alternatives structured with health-beneficial lipids like those derived from plants could replace saturated fatty acids. As a fat replacement strategy, the fate of incorporated HIPE would require some adjustments either with storage stability and/or structural feat for the food matrix. Therefore, the replacement of milk fat by rapeseed oil stabilised emulsion in commercial yogurt was investigated. This involved 25%, 50% and 75% rapeseed oil respectively assigned as low (LIPE), medium (MIPE), and high internal phase emulsion (HIPE). Specifically, emulsions were examined by droplet size, encapsulation, pH, zeta potential, phase separation, and rheology. The fat free yogurt supplemented by HIPE were examined by droplet size, zeta potential, pH, color, sensory, texture and microbiological aspects against positive (regular milk fat) and negative (fat free) yogurt controls. Results showed increasing rapeseed oil contents would form smaller droplet-like emulsions. Within the yogurt matrix however, incorporating HIPE would seemingly reduce oil droplet size without much compromise to bacterial viability, sensory, or texture. Overall, this simple method of lipid alternation shows promise in dairy products.

A comprehensive review on yogurt syneresis: effect of processing conditions and added additives

Yogurt, produced by the lactic fermentation of milk base, is an important dairy product worldwide. One of the essential sensory properties of yogurt is the texture, and some textural defects such as weak gel firmness and syneresis likely occur in various types of yogurts, affecting consumer acceptance. In this regard, various strategies such as enrichment of milk-based with different additives and ingredients such as protein-based components (skimmed milk powder (SMP), whey protein-based powders (WP), casein-based powders (CP), and suitable stabilizers, as well as modification of processing conditions (homogenization, fermentation, and cooling), can be applied in order to reduce syneresis. The most effective proteins and stabilizers in syneresis reduction are CP and gelatin, respectively. Furthermore, yogurt's water holding capacity and syneresis can be affected by the type of starter cultures, the protolithic activity, production of extracellular polysaccharides, and inoculation rate. Moreover, optimizing the heat treatment process (85 °C/30 min and 95 °C/5 min), homogenization (single or dual-stage), incubation temperature (around 40 °C), and two-step cooling process can decrease yogurt syneresis. This review is aimed to investigate the effect of fortification of the milk base with various additives and optimization of process conditions on improving texture and preventing syneresis in yogurt.

Effect of Storage Time and Bacterial Strain on the Quality of Probiotic Goat's Milk Using Different Types and Doses of Collagens

Recently, increasing attention has been focused on developing new products based on goat’s milk. Consumers positively perceive fermented goat’s milk products as health-promoting due to their nutritional value, digestibility, and potential source of probiotics. This study aimed to evaluate the possibility of using different doses of collagen and collagen hydrolysate in the production of probiotic goat’s milk fermented by four monocultures: Lacticaseibacillus casei 431® Lactobacillus acidophilus LA- 5®, Lacticaseibacillus paracasei LP26, and Lacticaseibicillus rhamnosus Lr- 32®. A total of 20 experimental groups were prepared, including control groups (without additives), and due to the added probiotic (Lacticaseibacillus casei, Lactobacillus acidophilus, Lacticaseibacillus paracasei, and Lacticaseibacillus rhamnosus), various collagen doses (1.5% and 3.0%) and collagen types (hydrolysate and bovine collagen). Physicochemical, organoleptic, and microbiological characteristics were evaluated after 1 and 21 days of cold storage. The applied additives increased the acidity of the milk even before fermentation. However, milk with bovine collagen and hydrolysate had a higher pH value after fermentation than control milk. The study showed higher than 8 log cfu g−1 viability of probiotic bacteria in goat’s milk products during storage due to the proper pH, high buffering capacity, and rich nutrient content of goat’s milk. The best survival rate was shown for the L. casei strain after 21 days in milk with collagen protein hydrolysate. Moreover, collagen in milk fermented by L. rhamnosus decreased syneresis compared to its control counterpart. The addition of collagen, especially the hydrolysate, increased the gel hardness of the fermented milk. The collagen additives used in the milk, both in the form of hydrolysate and bovine collagen, caused a darkening of the color of the milk and increased the intensity of the milky-creamy and sweet taste.

Fortification of milk-based yogurt with protein hydrolysates from brewers' spent grain: Evaluation on microstructural properties, lactic acid bacteria profile, lactic acid forming capability and its physical behavior

Current study aimed to evaluate the utilization of protein from brewers' spent grain (BSGP) on microstructural formation as well as rheological behavior, acidity and lactic acid bacteria (LAB) profile during the refrigerated storage. Three different BSGPs were provided including BSGP-C (extracted without enzymatic hydrolysis), BSGP-P (with protease), and BSGP-PF (with protease co-incubated with flavourzyme). The results demonstrated that BSGPs improved lactic acid forming capability in yogurt production to a higher level than milk-protein based enrichment. BSGPs improved the growth and survival of lactic acid bacteria (LAB), particularly BSGP-P in improving the survival rate of L. bulgaricus. Confocal laser scanning microscopy showed that BSGP-P generated a denser, softer and more homogenous surface appearance as well as showed the tendency to form more compact networks; had a weaker initial gel forming, increased and preserved the consistency of the yogurt during the storage. In conclusion, BSGPs in yogurt improved and preserved the textural properties, consistency, acidity and lactic acid bacteria.

•

Protease-extracted preserve the flow behavior of yogurt

•

Protease-extracted soften the microstructural surface of the matrices

•

BSG protein-rich extracts improve the survival of lactic acid bacteria

A new method for producing superior set yogurt, focusing on heat treatment and homogenization

Extended shelf life (ESL) processing (i.e., heat treatment at 130°C for 2 s) is usually not used for producing set yogurt because of the fragility of the curd structure. We investigated the effects of homogenization conducted at higher pressure than the conventional conditions (10 MPa for the first stage and 5 MPa for the second stage) on the curd structure of set yogurt, with a focus on the fat globule size. Each yogurt mix was adjusted at the range of fat globule sizes from 0.45 μm to 1.1 μm by a homogenizer and then heated at 95°C for 5 min (conventional heat treatment), 120°C for 2 s, ESL processing, or 140°C for 2 s. The yogurt mixes were fermented by a common yogurt starter, and the curd texture of the obtained yogurts was evaluated. We observed that the curd hardness and curd firmness of the yogurt were each negatively correlated with the fat globule size regardless of the heat-treatment temperature. Compared with the curd obtained with conventional heat treatment, the ESL-processed curd was extremely fragile, but significantly smooth. With ESL processing, a curd hardness >40 g, which is a sufficient strength for commercial transport systems, was obtained by making the fat particle size <0.6 µm, using 2-stage homogenization pressure: 35 MPa for the first stage and 5 MPa for the second stage. A microscopy analysis indicated that the smaller fat globules reinforce the network structure. The yogurt made by ESL processing and that created with 35 + 5 MPa homogenization had significant sensory evaluation scores. Our results indicate that the combination of ESL processing and 35 + 5 MPa homogenization is a novel and useful method for manufacturing set yogurt.

Heat-Induced Interaction of Milk Proteins: Impact on Yoghurt Structure

Heating milk for yoghurt preparation has a significant effect on the structural properties of yoghurt. Milk heated at elevated temperature causes denaturation of whey protein, aggregation, and some case gelation. It is important to understand the mechanism involved in each state of stabilization for tailoring the final product. We review the formation of these complexes and their consequence on the physical, rheological, and microstructural properties of acid milk gels. To investigate the interactions between denatured whey protein and casein, the formation of covalent and noncovalent bonds, localization of the complexes, and their impact on ultimate gelation and final yoghurt texture are reviewed. The information regarding this fundamental mechanism will be beneficial to develop uniform quality yoghurt texture and potential interest of future research.

Fat-free fermented concentrated milk products as milk protein-based microgel dispersions: Particle characteristics as key drivers of textural properties

The popularity of fat-free fermented concentrated milk products, such as fresh cheeses and high-protein yogurt, has increased over the recent years, attributed to greater availability and improvements in taste and texture. These improvements have been achieved through modifications and new developments in processing technologies, for example, higher heat treatment intensities and incorporating different membrane filtration technologies. Though numerous processing parameters are discussed in the literature, as well as reasons behind the developments, detailed examinations of how process modifications affect the final textural attributes of these products are lacking. To draw links between processing parameters and texture, we review the literature on fat-free fermented concentrated milk products from the perspective of fermented milk protein-based microgel particles as the basic structural unit. At each main processing step, relationships between process parameters, micro- and macrostructural and sensory (textural) properties are discussed.An overview of particle characteristics that drive structural changes at each processing step is developed in relation to textural characteristics. Using this approach of assessing relationships between structural characteristics of concentrated dispersions of fat-free fermented milk protein-based microgel particles and processing parameters provides a basic context for the selection of optimal parameters to achieve a desired texture.

Chemical and sensorial characterization of Tejate, a Mexican traditional maize-cocoa beverage, and improvement of its nutritional value by protein addition

Tejate is a Mexican traditional beverage elaborated with nixtamalized maize (Zea mays L.), cocoa (Theobroma cacao L.) beans, cacao flowers (Quararibea funebris), and mamey sapota fruit seeds (Pouteria sapota) that is considered a refreshing drink with satiety properties. Local formulations show a high content of minerals, but a relatively low protein content. The aim of this study was to identify a standardarized formulation but conserving physicochemical and sensorial ethnic identity of traditional Tejate, and to improve its nutritional value with the addition of protein without modifying its sensorial profile. A 2^4-1 fractional factorial design with central point was used to vary ingredients concentration and the amount of ash used for maize nixtamalization instead of lime (calcium hydroxide) was 75 g/100 g (w/w) of wood ashes in 2 L water. The standardized traditional formulation (TF) was selected through a sensory analysis with an expert panel: 20 g of cacao flowers, 30 g of mamey sapota fruit seeds, and 100 g of cocoa beans per kg of maize nixtamalized with 6% of ash. Whey protein concentrate (80% of protein) or soy protein isolate (88% of protein) were added to the TF at 1, 2, and 2.5%. The addition of 1% soy protein isolate increased TF protein content without modifying its physicochemical parameters, and improved the beverage stability during cold storage. The protein-rich Tejate formulation could be used as a functional beverage maintaining its ethnic identity.

SUPPLEMENTARY INFORMATION

The online version contains supplementary material available at 10.1007/s13197-021-05073-w.

3D printing of a high protein yoghurt-based gel: Effect of protein enrichment and gelatine on physical and sensory properties

The potential application of 3D printing technology in creating protein-rich desserts with multisensory design was investigated. Yoghurt-gel inks were formulated by varying the concentration of gelatine and whey protein isolate (WPI). Assessment of rheological and textural properties prior to printing, showed that an increase of gelatine concentration from 7.5 to 12.5% w/w increased the yield stress, storage modulus, loss modulus, firmness, and resilience of yoghurt gels. Addition of 12% WPI reduced these effects; creating softer gels with reduced resilience. However, these gels showed stable shape after printing, especially in formulations with higher gelatine concentrations. The changes in textural properties caused by the extrusion process need to be considered when designing yoghurt gels, as a significant reduction in firmness and resilience and an increase in adhesiveness were observed after 3D printing. The more stable and well-shaped 3D printed yoghurt gels were obtained by the combined effect of WPI and gelatine which provided a good balance of appearance, taste, flavour, and mouthfeel attributes evaluated by a trained sensory panel. A consumer study performed with thirty healthy adults showed the potential to improve sensory acceptance through the creation of multisensory layered design.

Smoothing temperature and ratio of casein to whey protein: Two tools to improve nonfat stirred yogurt properties

Consumers are not always ready to compromise on the loss of texture and increased syneresis that nonfat stirred yogurts display compared with yogurts that contain fat. In this study, we investigated milk protein composition and smoothing temperature as a means to control nonfat yogurt microstructure, textural properties, and syneresis. Yogurts were prepared with different ratios of casein to whey protein (R1.5, R2.8, and R3.9). Yogurts were pumped through a smoothing pilot system comprising a plate heat exchanger set at 15, 20, or 25°C and then stored at 4°C until analysis (d 1, 9, and 23). Yogurt particle size and firmness were measured. Yogurt syneresis and water mobility were determined, respectively, by centrifugation and time domain low-frequency proton nuclear magnetic resonance (¹H-LF-NMR). Increasing the smoothing temperature increased gel firmness and microgel (dense protein aggregates) sizes independently of the whey protein content. Also, yogurt microgel sizes changed with storage time, but the evolution pattern depended on protein ratio. Yogurt R1.5 showed the largest particles, and their sizes increased with storage, whereas R2.8 and R3.9 had smaller microgels, and R3.9 did not show any increase in microgel size during storage. Micrographs showed a heterogeneous gel with the empty area occupied by serum for R1.5, whereas R2.8 and R3.9 showed fewer serum zones and a more disrupted gel embedding microgels. Induced syneresis reduced with greater whey protein content and time of storage. This is in agreement with ¹H-LF-NMR showing less bulk water mobility with increasing whey protein content during storage. However, ¹H-LF-RMN revealed higher values of spontaneous serum separation during storage for R1.5 and R3.9 yogurts, whereas these were lower and stable for R2.8 yogurt. Microgels play an important structural role in yogurt textural attributes, and their characteristics are modulated by whey protein content and smoothing temperature. Optimization of these parameters may help improve nonfat stirred dairy gel.

Sugar Reduction in Dairy Food: An Overview with Flavoured Milk as an Example

Owing to the public health concern associated with the consumption of added sugar, the World Health Organization recommends cutting down sugar in processed foods. Furthermore, due to the growing concern of increased calorie intake from added sugar in sweetened dairy foods, the present review provides an overview of different types and functions of sugar, various sugar reduction strategies, and current trends in the use of sweeteners for sugar reduction in dairy food, taking flavoured milk as a central theme where possible to explore the aforementioned aspects. The strength and uniqueness of this review are that it brings together all the information on the available types of sugar and sugar reduction strategies and explores the current trends that could be applied for reducing sugar in dairy foods without much impact on consumer acceptance. Among different strategies for sugar reduction, the use of natural non-nutritive sweeteners (NNSs), has received much attention due to consumer demand for natural ingredients. Sweetness imparted by sugar can be replaced by natural NNSs, however, sugar provides more than just sweetness to flavoured milk. Sugar reduction involves multiple technical challenges to maintain the sensory properties of the product, as well as to maintain consumer acceptance. Because no single sugar has a sensory profile that matches sucrose, the use of two or more natural NNSs could be an option for food industries to reduce sugar using a holistic approach rather than a single sugar reduction strategy. Therefore, achieving even a small sugar reduction can significantly improve the diet and health of an individual.

Casein nanoparticles in combination with 2-hydroxypropyl-β-cyclodextrin improves the oral bioavailability of quercetin

The aim of this work was to optimize the preparative process of quercetin loaded casein nanoparticles as well as to evaluate the pharmacokinetics of this flavonoid when administered orally in Wistar rats. Nanoparticles were obtained by coacervation after the incubation of casein, 2-hydroxypropyl-β-cyclodextrin (HP-β-CD) and quercetin in an aqueous environment. Then, nanoparticles were purified and dried. The resulting nanoparticles displayed a size of 200 nm with a negative zeta potential and a payload of about 32 μg/mg. Release studies showed a zero-order kinetic, suggesting a mechanism based on erosion of the nanoparticle matrix. For the pharmacokinetic study, quercetin was orally administered to rats as a single dose of 25 mg/kg. Animals treated with quercetin-loaded casein nanoparticles displayed higher plasma levels than those observed in animals receiving the solution of the flavonoid (control). Thus, the relative oral bioavailability of quercetin when administered as casein nanoparticles (close to 37%) was found to be about 9-times higher than the oral solution of the flavonoid in a mixture of PEG 400 and water. In summary, the combination of casein and 2-hydroxypropyl-β-cyclodextrin produces nanoparticles that may be a good option to load quercetin for both nutraceutical and pharmaceutical purposes.

Set-style yoghurts made from goat milk bases fortified with whey protein concentrates

This research paper addresses the hypothesis that the fortification of goat milk base with whey protein concentrate (WPC) could affect both the textural and the biofunctional properties of set-style yoghurt. The effect of fortification of goat milk base with two different WPCs on thermophilic bacteria counts, proteolysis, physical and biofunctional properties of set-style yoghurts was studied at specific sampling points throughout a 4-week storage period. Fortification and storage did not influence thermophilic counts. Physical properties were affected significantly (P < 0.05) by the composition of the protein and the mineral fraction of the WPC but not by the storage. ACE-inhibitory activity was moderate in accordance to low lactobacilli counts and lack of proteolysis. DPPH-radical scavenging activity, Fe2+-chelating activity and superoxide scavenging activity were high. At 28 d an anti-inflammatory effect was observed, which was not affected by WPC addition.

Yoghurt-Type Gels from Skim Sheep Milk Base Enriched with Whey Protein Concentrate Hydrolysates and Processed by Heating or High Hydrostatic Pressure

An objective of the present study was the enrichment of skim sheep yoghurt milk base with hydrolysates (WPHs) of whey protein concentrate (WP80) derived from Feta cheesemaking. Moreover, the use of high hydrostatic pressure (HP) treatment at 600 MPa/55 C/10 min as an alternative for heat treatment of milk bases, was studied. In brief, lyophilized trypsin and protamex hydrolysates of WP80 produced under laboratory conditions were added in skim sheep milk. The composition and heat treatment conditions were set after the assessment of the heat stability of various mixtures; trisodium citrate was used as a chelating agent, when needed. According to the results, the conditions of heat treatment were more important for the physical properties of the gel than the type of enrichment. High pressure treatment resulted in inferior gel properties, irrespective of the type of enrichment. Supplementation of skim sheep milk with whey protein hydrolysates at >0.5% had a detrimental effect on gel properties. Finally, skim sheep milk base inoculated with fresh traditional yoghurt, resulted in yoghurt-type gels with high counts of Lb. delbrueckii subsp. bulgaricus and Str. thermophilus -close to the ideal 1:1- and with a high ACE inhibitory activity >65% that were not essentially affected by the experimental factors.

Incorporation of tocopherol-rich extracts from mushroom mycelia into yogurt

Consumers are well-informed about food additives and it is likely that they prefer natural additives over their synthetic analogues. Antioxidants represent a major class of food preservatives, among which tocopherols stand out as one of the most important examples. Interestingly, these compounds are present in relevant amounts in the mycelia of in vitro cultured mushrooms. Accordingly, the mycelia from Ganoderma lucidum, Pleurotus ostreatus and Pleurotus eryngii were used as alternative sources of tocopherols. These extracts were incorporated into different yogurt formulations, which were further compared among each other and with yogurts containing commercial α-tocopherol (E307), regarding their nutritional parameters, fatty acid profile and antioxidant activity. The proposed approach was validated as an effective functionalization strategy, particularly in the case of the G. lucidum mycelium, which showed the highest antioxidant potential, most likely as a result of its tocopherol profile. Furthermore, yogurts prepared with each mycelium extract allowed maintaining the nutritional properties observed in the "blank" yogurt formulation.

Functionalization of yogurts with Agaricus bisporus extracts encapsulated in spray-dried maltodextrin crosslinked with citric acid

Mushroom extracts contain bioactive compounds potentially useful to functionalize foodstuffs. Herein, alcoholic extracts of Agaricus bisporus were studied for their bioactivity and viability as functional ingredients in a food product with high water content (yogurt). Extracts were microencapsulated (to improve their stability and hydrophilicity) by spray-drying, using maltodextrin crosslinked with citric acid as encapsulating material. The effect of thermal treatment (after atomization) on crosslinking and bioactivity of microspheres was tested. The incorporation of free and thermally untreated forms resulted in yogurts with higher initial antioxidant activity (EC₅₀ values: 214 and 272 mg.mL^-1) that decreased after 7 days (EC₅₀ values: 248 and 314 mg.mL^-1). Contrarily, thermally treated microencapsulated extracts showed higher antioxidant activity after the same period (EC₅₀ values, 0 days: 106 mg.mL^-1; 7 days: 48.7 mg.mL^-1), in result of an effective protection provided by microencapsulation with crosslinked maltodextrin and citric acid. Functionalized yogurts showed an overall maintenance of nutritional properties.

Effect of different fat replacers on the physicochemical and instrumental analysis of low-fat cupuassu goat milk yogurts

The aim of this Research Communication was to investigate the changes in physicochemical, colour, apparent viscosity and texture properties in low-fat goat milk yogurts prepared with cupuassu pulp by the addition of inulin (SI), maltodextrin (SM), whey protein (SW) and skim milk powder (SP). Three batches of each cupuassu goat milk yogurt were prepared and analysed on the 1st day of storage by pH, proximate composition, colour, apparent viscosity, and texture. In comparison to yogurts from whole (W) or skimmed milk (S), all of the fat replacers improved the physicochemical properties (P < 0·05). The addition of the carbohydrates (inulin and maltodextrin) and proteins (whey protein and skim milk powder) also influenced the colour of the low-fat cupuassu goat milk yogurt (P < 0·05). All fat replacer treatments (SI, SM, SW and SP) presented a higher (P < 0·05) apparent viscosity than W and S yogurts. However, only the addition of skim milk powder increased the texture parameters (firmness and consistency) (P < 0·05). These results suggest that skim milk powder can be used to improve the texture properties of low-fat cupuassu goat milk. Furthermore, inulin, maltodextrin, and whey protein can potentially be applied in the goat dairy industry to increase the viscosity of yogurts.

Detection and Enumeration of Spore-Forming Bacteria in Powdered Dairy Products

With the abolition of milk quotas in the European Union in 2015, several member states including Ireland, Luxembourg, and Belgium have seen year on year bi-monthly milk deliveries to dairies increase by up to 35%. Milk production has also increased outside of Europe in the past number of years. Unsurprisingly, there has been a corresponding increased focus on the production of dried milk products for improved shelf life. These powders are used in a wide variety of products, including confectionery, infant formula, sports dietary supplements and supplements for health recovery. To ensure quality and safety standards in the dairy sector, strict controls are in place with respect to the acceptable quantity and species of microorganisms present in these products. A particular emphasis on spore-forming bacteria is necessary due to their inherent ability to survive extreme processing conditions. Traditional microbiological detection methods used in industry have limitations in terms of time, efficiency, accuracy, and sensitivity. The following review will explore the common spore-forming bacterial contaminants of milk powders, will review the guidelines with respect to the acceptable limits of these microorganisms and will provide an insight into recent advances in methods for detecting these microbes. The various advantages and limitations with respect to the application of these diagnostics approaches for dairy food will be provided. It is anticipated that the optimization and application of these methods in appropriate ways can ensure that the enhanced pressures associated with increased production will not result in any lessening of safety and quality standards.

Effect of Enrichment of Bovine Milk With Whey Proteins on Biofunctional and Rheological Properties of Low Fat Yoghurt-Type Products

In this study, the effect of supplementation of low fat bovine milk with whey protein concentrates (WPC) or whey protein hydrolysates (WPH) on the biofunctional and rheological properties of the produced yoghurt was assessed. Six different set type yoghurt products containing 1.6% fat were manufactured and enriched with: a) 1.5% bovine WPC (80% protein), marked as WPC_A yoghurt, b) 1% WPC (80% protein) of ovine/caprine origin, marked as WPC_B yoghurt, c) 2% commercial mixture of milk proteins, i.e. milk protein concentrate/ caseinates /WPC (82% total protein content), marked as MPM yoghurt, d) 0.25% WPC_B hydrolysed with trypsin, marked as WPH_A yoghurt, e) 0.5% commercial WPH, marked as WPH_B1yoghurt, f) 0.25% commercial WPH, marked as WPH_B2 yoghurt. Control yoghurt was manufactured without addition of protein. Results showed that the protein fortification level affected positively the protein, total solids as well as calcium and phosphorous contents of all yoghurt types. The lowest pH values were observed in the case of WPH_B2 yoghurt, while the highest in the case of MPM yoghurt throughout the storage i.e. 21 days. The characteristic microorganisms were in total more than 108cfu/g. Yoghurts fortified with WPH showed higher ACE-inhibitory activity (determined by the HPLC method) than those enriched with WPC. Also, it is noteworthy that WPH_A yoghurt showed significantly (P<0.05) higher ACE-inhibitory activity (72%) than control yoghurt or yoghurts made with the other WPH. On the other hand, WPH_A yoghurt showed the lowest hardness and adhesiveness, whereas MPM yoghurt showed the highest. The type of added whey protein did not affect cohesiveness. Water holding capacity was higher in yoghurts enriched with WPC and MPM than in the yoghurts enriched with WPH. All yoghurts presented antioxidant activity such as DPPH• radical scavenging activity (45-58%). The WPC_A yoghurt, MPM yoghurt, WPH_A yoghurt and control yoghurt presented high Fe2+ chelating activity (>70%), but WPH_A yoghurt presented the highest Fe2+ chelating activity (>95%) throughout storage. In conclusion, fortification of yoghurt milk with WPH increased the biofunctionality of the product, but the use of WPH of ovine/caprine origin increased it significantly.