Cruciform structures and functions

Impact of Ion-Mixing Entropy on Orientational Preferences of DNA Helices: FRET Measurements and Computer Simulations

Biological processes require DNA and RNA helices to pack together in specific interhelical orientations. While electrostatic repulsion between backbone charges is expected to be maximized when helices are in parallel alignment, such orientations are commonplace in nature. To better understand how the repulsion is overcome, we used experimental and computational approaches to investigate how the orientational preferences of DNA helices depend on the concentration and valence of mobile cations. We used Förster resonance energy transfer (FRET) to probe the relative orientations of two 24-bp helices held together via a freely rotating PEG linker. At low cation concentrations, the helices preferred more "cross"-like orientations over those closer to parallel, and this preference was reduced with increasing salt concentrations. The results were in good quantitative agreement with Poisson-Boltzmann (PB) calculations for monovalent salt (Na+). However, PB underestimated the ability of mixtures of monovalent and divalent ions (Mg2+) to reduce the conformational preference. As a complementary approach, we performed all-atom molecular dynamics (MD) simulations and found better agreement with the experimental results. While MD and PB predict similar electrostatic forces, MD predicts a greater accumulation of Mg2+ in the ion atmosphere surrounding the DNA. Mg2+ occupancy is predicted to be greater in conformations close to the parallel orientation than in conformations close to the crossed orientation, enabling a greater release of Na+ ions and providing an entropic gain (one bound ion for two released). MD predicts an entropy gain larger than that of PB because of the increased Mg2+ occupancy. The entropy changes have a negligible effect at low Mg2+ concentrations because the free energies are dominated by electrostatic repulsion. However, as the Mg2+ concentration increases, charge screening is more effective and the mixing entropy produces readily detectable changes in packing preferences. Our results underline the importance of mixing entropy of counterions in nucleic acid interactions and provide a new understanding on the impact of a mixed ion atmosphere on the packing of DNA helices.

Triple-helix potential of the mouse genome

Certain DNA sequences, including mirror-symmetric polypyrimidine•polypurine runs, are capable of folding into a triple-helix–containing non–B-form DNA structure called H-DNA. Such H-DNA–forming sequences occur frequently in many eukaryotic genomes, including in mammals, and multiple lines of evidence indicate that these motifs are mutagenic and can impinge on DNA replication, transcription, and other aspects of genome function. In this study, we show that the triplex-forming potential of H-DNA motifs in the mouse genome can be evaluated using S1-sequencing (S1-seq), which uses the single-stranded DNA (ssDNA)–specific nuclease S1 to generate deep-sequencing libraries that report on the position of ssDNA throughout the genome. When S1-seq was applied to genomic DNA isolated from mouse testis cells and splenic B cells, we observed prominent clusters of S1-seq reads that appeared to be independent of endogenous double-strand breaks, that coincided with H-DNA motifs, and that correlated strongly with the triplex-forming potential of the motifs. Fine-scale patterns of S1-seq reads, including a pronounced strand asymmetry in favor of centrally positioned reads on the pyrimidine-containing strand, suggested that this S1-seq signal is specific for one of the four possible isomers of H-DNA (H-y5). By leveraging the abundance and complexity of naturally occurring H-DNA motifs across the mouse genome, we further defined how polypyrimidine repeat length and the presence of repeat-interrupting substitutions modify the structure of H-DNA. This study provides an approach for studying DNA secondary structure genome-wide at high spatial resolution.

Structural switching/polymorphism by sequential base substitution at quasi-palindromic SNP site (G → A) in LCR of human β-globin gene cluster

The human β-globin gene Locus Control Region (LCR), a dominant regulator of globin gene expression contains five tissue-specific DNase I-hypersensitive sites (HSs). A single nucleotide polymorphism (SNP) (A → G) present in HS4 region of locus control region (LCR), have shown a notable association between the G allele and the occurrence of β-thalassemia. This SNP site exhibiting a hairpin - duplex equilibrium manifested in A → B like DNA transition has previously been reported from this laboratory. Since, DNA is a dynamic and adaptable molecule, so any change of a single base within a primary DNA sequence can produce major biological consequences commonly manifested in genetic disorders such as sickle cell anemia and β-thalassemia. Herein, the differential behavior of sequential single base substitutions G → A on the quasi-palindromic sequence (d-TGGGGGCCCCA; HPG11) has been explored. A combination of native gel electrophoresis, circular dichroism (CD), and UV-thermal denaturation (Tm) techniques have been used to investigate the structural polymorphism associated with various variants of HPG11 i.e. HPG11A2 to HPG11A5. The CD spectra confirmed that all the HPG11 variants exhibit a hairpin - duplex equilibrium. Oligomer concentration dependence on CD spectra has been correlated with A → B DNA conformational transition. However, as revealed in gel electrophoresis, HPG11A2 → A5 exhibit the formation of a tetramolecular structure (four-way junction) at higher oligomer concentration. UV-melting studies also supported the melting of hairpin, duplex and four-way junction structure. This polymorphism pattern may possibly be significant for DNA-protein recognition, in the process of regulation of LCR in the β-globin gene.

DNA and RNA folds in transcription complex as evidenced by iodine-125 radioprobing

Abstract Folding of the DNA and RNA strands in an arrested T7 RNA polymerase (RNAP) transcription complex was studied by radioprobing, a novel method based on an analysis of the strand breaks produced by decay of the iodine-125 incorporated at the C5 position of cytosine. (125)I-labeled cytosines were incorporated into transcripts at different positions relative to the site of the arrest. The intensities of the DNA breaks inversely correlate with the distances from the (125)I decay site, so the radioprobing data provide information about the spatial RNA/DNA folding during transcription. We found that the yield of DNA strand breaks is significantly higher in the template than the non-template strand. This is consistent with local opening of the DNA duplex and formation of a hybrid between RNA and the template DNA strand. Our data demonstrate that the RNA-DNA hybrid has a nonuni form A-like structure. When the (125)I is incorporatedseven nucleotides from the active center of RNAP, the yield of strand breaks is substantially lower than if (125)I is positioned at the ends of the hybrid. Consequently, the DNA and RNA strands are located closer to each other at the ends of the hybrid and somehow separated in the middle. Surprisingly, the (125)I-induced breaks were detected in both DNA strands upstream from the transcription "bubble" indicating that DNA and RNA are closely associated outside the RNAP cleft. Thus, radioprobing data imply that the RNA/DNA fold in the complex with T7 RNAP is more complicated than had been anticipated by the existing models. Based on the present data, we suggest a sterically feasible model explaining how formation of the long RNA-DNA hybrid can result in the initiation-to-elongation switch in the T7 transcription complex. According to this model, the topological linkage between the DNA and RNA strands provides the necessary stability for the elongation complex, while permitting movement of the polymerase along the DNA duplex.

In-silico modeling studies of G-quadruplex with soy isoflavones having anticancerous activity

Telomere forms t-loop and G-quadruplex as the protective structure and the formation of these structures hinder the telomerase enzyme action. The binding affinities of ligand which stabilize the G-quadruplex represent good correlation with telomerase inhibition depicted in the anti-cancerous action. Most of the potent G-quadruplex stabilizing compounds suffer from the poor drug like properties. Herein, natural dietary compounds isoflavones were taken for the theoretical study to examine their stabilizing effect on G-quadruplex structure. The experimental G-quadruplex complexes were reproduced to obtain and validate the theoretical parameters. The obtained theoretical binding energies are in significant correlation with the experimental data. Analysis of binding shows isoflavones to be groove binders, and differential nature of quadruplex grooves might be beneficial in the selectivity aspects. Among all, derrubone was found to have better selectivity as well as affinity for the G-quadruplex comparable to well known ligand TMPyP4. The GBSA rescoring result enlightens the various interaction terms involved in the binding process. Cumulative stabilizing effects coming from VDW, ES, and GB energy terms attest to optimal binding of derrubone molecule which can be considered as a lead for the higher phases of drug designing. These findings are of great value in terms of unexplored groove binding modes and the studied natural compounds might be helpful to direct the focus of synthetic chemists in designing of new generation of antitumor agents.

DNA-directed base pair opening

Strand separation is a fundamental molecular process essential for the reading of the genetic information during DNA replication, transcription and recombination. However, DNA melting in physiological conditions in which the double helix is expected to be stable represents a challenging problem. Current models propose that negative supercoiling destabilizes the double helix and promotes the spontaneous, sequence-dependent DNA melting. The present review examines an alternative view and reveals how DNA compaction may trigger the sequence dependent opening of the base pairs. This analysis shows that in DNA crystals, tight DNA-DNA interactions destabilize the double helices at various degrees, from the alteration of the base-stacking to the opening of the base-pairs. The electrostatic repulsion generated by the DNA close approach of the negatively charged sugar phosphate backbones may therefore provide a potential source of the energy required for DNA melting. These observations suggest a new molecular mechanism for the initial steps of strand separation in which the coupling of the DNA tertiary and secondary interactions both actively triggers the base pair opening and stabilizes the intermediate states during the melting pathway.

Crystallographic and spectroscopic studies of d(CCGGTACCGG)

The decanucleotide sequence d(CCGGTACCGG) crystallizes as a four-way junction at low cobalt ion concentrations (i.e., 1 mM). When the cobalt concentration in the crystallization solution is increased to 5 mM, the sequence crystallizes as resolved B-DNA duplexes. Gel retardation studies of the decamer show both a faint slow-moving band and a much thicker fast-moving band at low cobalt ion concentrations, and only the intense fast-moving band at higher ion concentration. Circular dichroism (CD) spectroscopy of the decamer indicates a structural transition as the cobalt ion concentration in the solution is increased, probably from B-type to A-type DNA. These studies revealed that the oligomer sequence has several conformations and structures accessible to it, in a manner dependent on sequence, ion concentration, and DNA concentration. [Supplementary materials are available for this article. Go to the publisher's online edition of Nucleosides, Nucleotides & Nucleic Acids for the following free supplemental resources(s): Supplementary Figures 1, 2, and 3.].

Local sensing of global DNA topology: from crossover geometry to type II topoisomerase processivity

Type II topoisomerases are ubiquitous enzymes that control the topology and higher order structures of DNA. Type IIA enzymes have the remarkable property to sense locally the global DNA topology. Although many theoretical models have been proposed, the molecular mechanism of chiral discrimination is still unclear. While experimental studies have established that topoisomerases IIA discriminate topology on the basis of crossover geometry, a recent single-molecule experiment has shown that the enzyme has a different processivity on supercoiled DNA of opposite sign. Understanding how cross-over geometry influences enzyme processivity is, therefore, the key to elucidate the mechanism of chiral discrimination. Analysing this question from the DNA side reveals first, that the different stability of chiral DNA cross-overs provides a way to locally sense the global DNA topology. Second, it shows that these enzymes have evolved to recognize the G- and T-segments stably assembled into a right-handed cross-over. Third, it demonstrates how binding right-handed cross-overs across their large angle imposes a different topological link between the topoIIA rings and the plectonemes of opposite sign thus directly affecting the enzyme freedom of motion and processivity. In bridging geometry and kinetic data, this study brings a simple solution for type IIA topoisomerase chiral discrimination.

Cytosine, the double helix and DNA self-assembly

DNA self-assembly has crucial implications in reading out the genetic information in the cell and in nanotechnological applications. In a recent paper, self-assembled DNA crystals displaying spectacular triangular motifs have been described (Zheng et al., 2009). The authors claimed that their data demonstrate the possibility to rationally design well-ordered macromolecular 3D DNA lattice with precise spatial control using sticky ends. However, the authors did not recognize the fundamental features that control DNA self-assembly in the lateral direction. By analysing available crystallographic data and simulating a DNA triangle, we show that the double helix geometry, sequence-specific cytosine–phosphate interactions and divalent cations are in fact responsible for the precise spatial assembly of DNA.

Differential stability of DNA crossovers in solution mediated by divalent cations

The assembly of DNA duplexes into higher-order structures plays a major role in many vital cellular functions such as recombination, chromatin packaging and gene regulation. However, little is currently known about the molecular structure and stability of direct DNA–DNA interactions that are required for such functions. In nature, DNA helices minimize electrostatic repulsion between double helices in several ways. Within crystals, B-DNA forms either right-handed crossovers by groove–backbone interaction or left-handed crossovers by groove–groove juxtaposition. We evaluated the stability of such crossovers at various ionic concentrations using large-scale atomistic molecular dynamics simulations. Our results show that right-handed DNA crossovers are thermodynamically stable in solution in the presence of divalent cations. Attractive forces at short-range stabilize such crossover structures with inter-axial separation of helices less than 20 Å. Right-handed crossovers, however, dissociate swiftly in the presence of monovalent ions only. Surprisingly, left-handed crossovers, assembled by sequence-independent juxtaposition of the helices, appear unstable even at the highest concentration of Mg²⁺studied here. Our study provides new molecular insights into chiral association of DNA duplexes and highlights the unique role divalent cations play in differential stabilization of crossover structures. These results may serve as a rational basis to understand the role DNA crossovers play in biological processes.

Helical chirality: a link between local interactions and global topology in DNA

DNA supercoiling plays a major role in many cellular functions. The global DNA conformation is however intimately linked to local DNA-DNA interactions influencing both the physical properties and the biological functions of the supercoiled molecule. Juxtaposition of DNA double helices in ubiquitous crossover arrangements participates in multiple functions such as recombination, gene regulation and DNA packaging. However, little is currently known about how the structure and stability of direct DNA-DNA interactions influence the topological state of DNA. Here, a crystallographic analysis shows that due to the intrinsic helical chirality of DNA, crossovers of opposite handedness exhibit markedly different geometries. While right-handed crossovers are self-fitted by sequence-specific groove-backbone interaction and bridging Mg(2+) sites, left-handed crossovers are juxtaposed by groove-groove interaction. Our previous calculations have shown that the different geometries result in differential stabilisation in solution, in the presence of divalent cations. The present study reveals that the various topological states of the cell are associated with different inter-segmental interactions. While the unstable left-handed crossovers are exclusively formed in negatively supercoiled DNA, stable right-handed crossovers constitute the local signature of an unusual topological state in the cell, such as the positively supercoiled or relaxed DNA. These findings not only provide a simple mechanism for locally sensing the DNA topology but also lead to the prediction that, due to their different tertiary intra-molecular interactions, supercoiled molecules of opposite signs must display markedly different physical properties. Sticky inter-segmental interactions in positively supercoiled or relaxed DNA are expected to greatly slow down the slithering dynamics of DNA. We therefore suggest that the intrinsic helical chirality of DNA may have oriented the early evolutionary choices for DNA topology.

Molecular models for intrastrand DNA G-quadruplexes

BACKGROUND

Independent surveys of human gene promoter regions have demonstrated an overrepresentation of G(3)X(n1)G3X(n2)G(3)X(n3)G(3) motifs which are known to be capable of forming intrastrand quadruple helix structures. In spite of the widely recognized importance of G-quadruplex structures in gene regulation and growing interest around this unusual DNA structure, there are at present only few such structures available in the Nucleic Acid Database. In the present work we generate by molecular modeling feasible G-quadruplex structures which may be useful for interpretation of experimental data.

RESULTS

We have used all quadruplex DNA structures deposited in the Nucleic Acid Database in order to select a list of fragments entailing a strand of three adjacent G's paired with another strand of three adjacent G's separated by a loop of one to four residues. These fragments were further clustered and representative fragments were finally selected. Further fragments were generated by assemblying the two strands of each fragment with loops from different fragments whenever the anchor G's were superimposable. The fragments were used to assemble G quadruplex based on a superimposability criterion.

CONCLUSION

Molecular models have been generated for a large number of G(3)X(n1)G(3)X(n2)G3X(n3)G(3) sequences. For a given sequence not all topologies are possible with the available repertoire of fragments due to steric hindrance and low superimposability. Since all molecular models are generated by fragments coming from observed quadruplex structures, molecular models are in principle reliable and may be used for interpretation of experimental data. Some examples of applications are given.

DNA energy landscapes via calorimetric detection of microstate ensembles of metastable macrostates and triplet repeat diseases

Biopolymers exhibit rough energy landscapes, thereby allowing biological processes to access a broad range of kinetic and thermodynamic states. In contrast to proteins, the energy landscapes of nucleic acids have been the subject of relatively few experimental investigations. In this study, we use calorimetric and spectroscopic observables to detect, resolve, and selectively enrich energetically discrete ensembles of microstates within metastable DNA structures. Our results are consistent with metastable, "native" DNA states being composed of an ensemble of discrete and kinetically stable microstates of differential stabilities, rather than exclusively being a single, discrete thermodynamic species. This conceptual construct is important for understanding the linkage between biopolymer conformational/configurational space and biological function, such as in protein folding, allosteric control of enzyme activity, RNA and DNA folding and function, DNA structure and biological regulation, etc. For the specific DNA sequences and structures studied here, the demonstration of discrete, kinetically stable microstates potentially has biological consequences for understanding the development and onset of DNA expansion and triplet repeat diseases.

Does topoisomerase II specifically recognize and cleave hairpins, cruciforms and crossovers of DNA?

DNA topoisomerase II is an enzyme that specializes in DNA disentanglement. It catalyzes the interconversion of DNA between different topological states. This event requires the passage of one duplex through another one via a transient double-strand break. Topoisomerase II is able to process any type of DNA, including structures such as DNA juxtapositions (crossovers), DNA hairpins or cruciforms, which are recognized with high specificity. In this review, we focused our attention on topoisomerase II recognizing DNA substrates that possess particular geometries. A strong cleavage site, as we identified in pBR322 DNA in the presence of ellipticine (site 22), appears to be characterized by a cruciform structure formed from two stable hairpins. The same sequence could also constitute a four-way junction structure stabilized by interactions involving ATC sequences. The latter have been shown to be able to promote Holliday junctions. We reviewed the recent literature that deals with the preferential recognition of crossovers by various topoisomerases. The single molecule relaxation experiments have demonstrated the differential abilities of the topoisomerases to recognize crossovers. It appears that enzymes, which distinguish the chirality of the crossovers, possess specialized domains dedicated to this function. We also stress that the formation of crossovers is dependent on the presence of adequate stabilizing sequences. Investigation of the impact of such structures on enzyme activity is important in order to both improve our knowledge of the mechanism of action of the topoisomerase II and to develop new inhibitors of this enzyme.

Influence of cationic molecules on the hairpin to duplex equilibria of self-complementary DNA and RNA oligonucleotides

A self-complementary nucleotide sequence can form both a unimolecular hairpin and a bimolecular duplex. In this study, the secondary structures of the self-complementary DNA and RNA oligonucleotides with different sequences and lengths were investigated under various solution conditions by gel electrophoresis, circular dichroism (CD) and electron paramagnetic resonance (EPR) spectroscopy and a ultraviolet (UV) melting analysis. The DNA sequences tended to adopt a hairpin conformation at low cation concentrations, but a bimolecular duplex was preferentially formed at an elevated cationic strength. On the other hand, fully matched RNA sequences adopted a bimolecular duplex regardless of the cation concentration. The thermal melting experiments indicated a greater change in the melting temperature of the bimolecular duplexes (by approximately 20 degrees C) than that of the hairpin (by approximately 10 degrees C) by increasing the NaCl concentration from 10 mM to 1 M. Hairpin formations were also observed for the palindrome DNA sequences derived from Escherichia coli, but association of the complementary palindrome sequences was observed when spermine, one of the major cationic molecules in a cell, existed at the physiological concentration. The results indicate the role of cations for shifting the structural equilibrium toward a nucleotide assembly and implicate nucleotide structures in cells.

Global structure of a DNA three-way junction by solution NMR: towards prediction of 3H fold

Three-way junctions (3H) are the simplest and most commonly occurring branched nucleic acids. They consist of three double helical arms (A to C), connected at the junction point, with or without a number of unpaired bases in one or more of the three different strands. Three-way junctions with two unpaired bases in one strand (3HS2) have a high tendency to adopt either of two alternative stacked conformations in which two of the three arms A, B and C are coaxially stacked, i.e. A/B-stacked or A/C-stacked. Empirical stacking rules, which successfully predict for DNA 3HS2 A/B-stacking preference from sequence, have been extended to A/C-stacked conformations. Three novel DNA 3HS2 sequences were designed to test the validity of these extended stacking rules and their conformational behavior was studied by solution NMR. All three show the predicted A/C-stacking preference even in the absence of multivalent cations. The stacking preference for both classes of DNA 3HS2 can thus be predicted from sequence. The high-resolution NMR solution structure for one of the stacked 3HS2 is also reported. It shows a well-defined local and global structure defined by an extensive set of classical NMR restraints and residual dipolar couplings. Analysis of its global conformation and that of other representatives of the 3H family, shows that the relative orientations of the stacked and non-stacked arms, are restricted to narrow regions of conformational space, which can be understood from geometric considerations. Together, these findings open up the possibility of full prediction of 3HS2 conformation (stacking and global fold) directly from sequence.

Interaction in vitro of type III intermediate filament proteins with triplex DNA

As previously shown, type III intermediate filaments (IFs) select from a mixture of linear mouse genomic DNA fragments mobile and repetitive, recombinogenic sequences that have also been identified in SDS-stable crosslinkage products of vimentin and DNA isolated from intact fibroblasts. Because these sequences also included homopurine.homopyrimidine (Pu.Py) tracts known to adopt triple-helical conformation under superhelical tension, and because IF proteins are single-stranded (ss) and supercoiled DNA-binding proteins, it was of interest whether they have a particular affinity for triplex DNA. To substantiate this, IF-selected DNA fragments harboring a (Pu.Py) segment and synthetic d(GA)(n) microsatellites were inserted into a vector plasmid and the constructs analyzed for their capacity to interact with IF proteins. Band shift assays revealed a substantially higher affinity of the IF proteins for the insert-containing plasmids than for the empty vector, with an activity decreasing in the order of vimentin > glial fibrillary acidic protein > desmin. In addition, footprint analyses performed with S1 nuclease, KMnO(4), and OsO(4)/bipyridine showed that the (Pu.Py) inserts had adopted triplex conformation under the superhelical strain of the plasmids, and that the IF proteins protected the triple-helical insert sequences from nucleolytic cleavage and chemical modification. All these activities were largely reduced in extent when analyzed on linearized plasmid DNAs. Because intramolecular triplexes (H-DNA) expose single-stranded loops, and the prokaryotic ssDNA-binding proteins g5p and g32p also protected at least the Pu-strand of the (Pu.Py) inserts from nucleolytic degradation, it seemed likely that the IF proteins take advantage of their ssDNA-binding activity in interacting with H-DNA. However, in contrast to g5p and E. coli SSB, they produced no clear band shifts with single-stranded d(GA)(20) and d(TC)(20), so that the interactions rather appear to occur via the duplex-triplex and triplex-loop junctions of H-DNA. On the other hand, the IF proteins, and also g32p, promoted the formation of intermolecular triplexes from the duplex d[A(GA)(20).(TC)(20)T] and d(GA)(20) and d(TC)(20) single strands, with preference of the Py (Pu.Py) triplex motif, substantiating an affinity of the proteins for the triplex structure as such. This triplex-stabilizing effect of IF proteins also applies to the H-DNA of (Pu.Py) insert-containing plasmids, as demonstrated by the preservation of intramolecular triplex-vimentin complexes upon linearization of their constituent supercoiled DNAs, in contrast to poor complex formation from free, linearized plasmid DNA and vimentin. Considering that (Pu.Py) sequences are found near MAR/replication origins, in upstream enhancer and promoter regions of genes, and in recombination hot spots, these results might point to roles of IF proteins in DNA replication, transcription, recombination, and repair.

Brownian-dynamics simulations of metal-ion binding to four-way junctions

Four-way junctions (4Hs) are important intermediates in DNA rearrangements such as genetic recombination. Under the influence of multivalent cations these molecules undergo a conformational change, from an extended planar form to a quasi-continuous stacked X-structure. Recently, a number of X-ray structures and a nuclear magnetic resonance (NMR) structure of 4Hs have been reported and in three of these the position of multivalent cations is revealed. These structures belong to two main families, characterized by the angle between the two co-axial stacked helices, which is either around +40 to +55 degrees or around -70 to -80 degrees. To investigate the role of metal-ion binding on the conformation of folded 4Hs we performed Brownian-dynamics simulations on the set of available structures. The simulations confirm the proposed metal-ion binding sites in the NMR structure and in one of the X-ray structures. Furthermore, the calculations suggest positions for metal-ion binding in the other X-ray structures. The results show a striking dependence of the ion density on the helical environment (B-helix or A-helix) and the structural family.

DNA loops and semicatenated DNA junctions

BACKGROUND

Alternative DNA conformations are of particular interest as potential signals to mark important sites on the genome. The structural variability of CA microsatellites is particularly pronounced; these are repetitive poly(CA). poly(TG) DNA sequences spread in all eukaryotic genomes as tracts of up to 60 base pairs long. Many in vitro studies have shown that the structure of poly(CA). poly(TG) can vary markedly from the classical right handed DNA double helix and adopt diverse alternative conformations. Here we have studied the mechanism of formation and the structure of an alternative DNA structure, named Form X, which was observed previously by polyacrylamide gel electrophoresis of DNA fragments containing a tract of the CA microsatellite poly(CA). poly(TG) but had not yet been characterized.

RESULTS

Formation of Form X was found to occur upon reassociation of the strands of a DNA fragment containing a tract of poly(CA). poly(TG), in a process strongly stimulated by the nuclear proteins HMG1 and HMG2. By inserting Form X into DNA minicircles, we show that the DNA strands do not run fully side by side but instead form a DNA knot. When present in a closed DNA molecule, Form X becomes resistant to heating to 100 degrees C and to alkaline pH.

CONCLUSIONS

Our data strongly support a model of Form X consisting in a DNA loop at the base of which the two DNA duplexes cross, with one of the strands of one duplex passing between the strands of the other duplex, and reciprocally, to form a semicatenated DNA junction also called a DNA hemicatenane.

DNA structure and polymerase fidelity

The accuracy of DNA replication results from both the intrinsic DNA polymerase fidelity and the DNA sequence. Although the recent structural studies on polymerases have brought new insights on polymerase fidelity, the role of DNA sequence and structure is less well understood. Here, the analysis of the crystal structures of hotspots for polymerase slippage including (CA)n and (A)n tracts in different intermolecular contexts reveals that, in the B-form, these sequences share common structural alterations which may explain the high rate of replication errors. In particular, a two-faced "Janus-like" structure with shifted base-pairs in the major groove but an apparent normal geometry in the minor groove constitutes a molecular decoy specifically suitable to mislead the polymerases. A model of the rat polymerase beta bound to this structure suggests that an altered conformation of the nascent template-primer duplex can interfere with correct nucleotide incorporation by affecting the geometry of the active site and breaking the rules of base-pairing, while at the same time escaping enzymatic mechanisms of error discrimination which scan for the correct geometry of the minor groove.In contrast, by showing that the A-form greatly attenuates the sequence-dependent structural alterations in hotspots, this study suggests that the A-conformation of the nascent template-primer duplex at the vicinity of the polymerase active site will contribute to fidelity. The A-form may play the role of a structural buffer which preserves the correct geometry of the active site for all sequences. The detailed comparison of the conformation of the nascent template-primer duplex in the available crystal structures of DNA polymerase-DNA complexes shows that polymerase beta, the least accurate enzyme, is unique in binding to a B-DNA duplex even close to its active site. This model leads to several predictions which are discussed in the light of published experimental data.

Left-handed DNA crossovers. Implications for DNA-DNA recognition and structural alterations

The close approach of DNA segments participates in many biological functions including DNA condensation and DNA processing. Previous crystallographic studies have shown that B-DNA self-fitting by mutual groove-backbone interaction produces right-handed DNA crossovers. These structures have opened new perspectives on the role of close DNA-DNA interactions in the architecture and activity the DNA molecule. In the present study, the analysis of the crystal packing of two B-DNA decamer duplexes d(CCIIICCCGG) and d(CCGCCGGCGG) reveals the existence of new modes of DNA crossing. Symmetric left-handed crossovers are produced by mutual fitting of DNA grooves at the crossing point. New sequence patterns contribute to stabilize longitudinal fitting of the sugar-phosphate backbone into the major groove. In addition, the close approach of DNA segments greatly influences the DNA conformation in a sequence dependent manner. This study provides new insights into the role of DNA sequence and structure in DNA-DNA recognition. In providing detailed molecular views of DNA crossovers of opposite chirality, this study can also help to elucidate the role of symmetry and chirality in the recognition of complex DNA structures by protein dimers or tetramers, such as topoisomerase II and recombinase enzymes. These results are discussed in the context of the possible relationships between DNA condensation and DNA processing.

Symmetry and chirality in topoisomerase II-DNA crossover recognition

Several experimental data support the notion that the recognition of DNA crossovers play an important role in the multiple functions of topoisomerase II. Here, a theoretical analysis of the possible modes of assembly of yeast topoisomerase II with right and left-handed tight DNA crossovers is performed, using the crystal coordinates of the docking partners. The DNA crossovers are assumed to be clamped into the central hole of the enzyme. Taking into account the rules for building symmetric ternary complexes and the structural constraints imposed by DNA-DNA and protein-DNA interactions, this analysis shows that two geometric solutions could exist, depending on the chirality of the DNA crossovers. In the first one, the two DNA segments are symmetrically recognized by the enzyme while each single double helix binds asymmetrically the protein dimer. In the second one, each double helix is symmetrically recognized by the protein around its dyad axis, while the two DNA segments have their own binding modes. The finding of potential DNA-binding domains which could interact with the crossovers provides structural supports for each model. The structural similarity of a loop containing a cluster of conserved basic residues pointing into the central hole of topoisomerase II and the second DNA-binding site of histone H5 which binds DNA crossover is of particular interest. Each solution, which is consistent with different sets of experimental data found in the literature, could either correspond to different functions of the enzyme or different steps of the reaction. This work provides structural insights for better understanding the role of chirality and symmetry in topoisomerase II-DNA crossover recognition, suggests testable experiments to further elucidate the structure of ternary complexes, and raises new questions about the relationships between the mechanism of strand-passage and strand-exchange catalyzed by the enzyme.

Structure and dynamics of supercoil-stabilized DNA cruciforms

Understanding DNA function requires knowledge of the structure of local, sequence-dependent conformations that can be dramatically different from the B-form helix. One alternative DNA conformation is the cruciform, which has been shown to have a critical role in the initiation of DNA replication and the regulation of transcription in certain systems. In addition, cruciforms provide a model system for structural studies of Holliday junctions, intermediates in homologous DNA recombination. Cruciforms are not thermodynamically stable in linear DNA due to branch point migration, which makes their study using many biophysical techniques problematic. Atomic Force Microscopy (AFM) was applied to visualize cruciforms in negatively supercoiled plasmid DNA. Cruciforms are seen as clear-cut extrusions on the DNA filament with the lengths of the arms consistent with the size of the hairpins expected from a 106 bp inverted repeat. The cruciform exists in two different conformations, an extended one with the angle of ca. 180 degrees between the hairpin arms and a compact, X-type conformation, with acute angles between the hairpin arms and the main DNA strands. The ratio of molecules with the different conformations of cruciforms depends on ionic conditions. In the presence of high salt or Mg cations, a compact, X-type conformation is highly preferable. Remarkably, the X-conformation was highly mobile allowing the cruciform arms to adopt a parallel orientation. The structure observed is consistent with a model of the Holliday junction with a parallel orientation of the exchanging strands.

Hydration and recognition of methylated CpG steps in DNA

The analysis of the hydration pattern around methylated CpG steps in three high resolution (1.7, 2.15 and 2.2 A) crystal structures of A-DNA decamers reveals that the methyl groups of cytosine residues are well hydrated. In comparing the native structure with two structurally distinct forms of the decamer d(CCGCCGGCGG) fully methylated at its CpG steps, this study shows also that in certain structural and sequence contexts, the methylated cytosine base can be more hydrated that the unmodified one. These water molecules seem to be stabilized in front of the methyl group through the formation C-H...O interactions. In addition, these structures provide the first observation of magnesium cations bound to the major groove of A-DNA and reveal two distinct modes of metal binding in methylated and native duplexes. These findings suggest that methylated cytosine bases could be recognized by protein or DNA polar residues through their tightly bound water molecules.