X-ray Spectrometry

Phytoremediation of toxic metals present in soil and water environment: a critical review

Heavy metals are one of the most hazardous inorganic contaminants of both water and soil environment composition. Normally, heavy metals are non-biodegradable in nature because of their long persistence in the environment. Trace amounts of heavy metal contamination may pose severe health problems in human beings after prolonged consumption. Many instrumental techniques such as atomic absorption spectrophotometry, inductively coupled plasma-mass spectrometry, X-ray fluorescence, neutron activation analysis, etc. have been developed to determine their concentration in water as well as in the soil up to ppm, ppb, or ppt levels. Recent advances in these techniques along with their respective advantages and limitations are being discussed in the present paper. Moreover, some possible remedial phytoremediation approaches (phytostimulation, phytoextraction, phyotovolatilization, rhizofiltration, phytostabilization) have been presented for the removal of the heavy metal contamination from the water and soil environments.

Evaluation of micro-energy dispersive X-ray fluorescence and histochemical tests for aluminium detection in plants from High Altitude Rocky Complexes, Southeast Brazil

The soils developed under High Altitude Rocky Complexes in Brazil are generally of very low chemical fertility, with low base saturation and high exchangeable aluminium concentration. This stressful condition imposes evolutionary pressures that lead to ecological success of plant species that are able to tolerate or accumulate high amounts of aluminium. Several analytical methods are currently available for elemental mapping of biological structures, such as micro-X-ray fluorescence (μ-EDX) and histochemical tests. The aim of this study was to combine μ-EDX analysis and histochemical tests to quantify aluminium in plants from High Altitude Rocky Complexes, identifying the main sites for Al-accumulation. Among the studied species, five showed total Al concentration higher than 1000 mg kg−1. The main Al-hyperaccumulator plants, Lavoisiera pectinata, Lycopodium clavatum and Trembleya parviflora presented positive reactions in the histochemical tests using Chrome Azurol and Aluminon. Strong positive correlations were observed between the total Al concentrations and data obtained by μ-EDX analysis. The μ-EDX analysis is a potential tool to map and quantify Al in hyperaccumulator species, and a valuable technique due to its non-destructive capacity. Histochemical tests can be helpful to indicate the accumulation pattern of samples before they are submitted for further μ-EDX scrutiny.

New highly sensitive and selective catalytic DNA biosensors for metal ions

While remarkable progress has been made in developing sensors for metal ions such as Ca(II) and Zn(II), designing and synthesizing sensitive and selective metal ion sensors remains a significant challenge. Perhaps the biggest challenge is the design and synthesis of a sensor capable of specific and strong metal binding. Since our knowledge about the construction of metal-binding sites in general is limited, searching for sensors in a combinatorial way is of significant value. Therefore, we have been able to use a combinatorial method called in vitro selection to obtain catalytic DNA that can bind a metal ion of choice strongly and specifically. The metal ion selectivity of the catalytic DNA was further improved using a 'negative selection' strategy where catalytic DNA that are selective for competing metal ions are discarded in the in vitro selection processes. By labeling the resulting catalytic DNA with a fluorophore/quencher pair, we have made a new class of metal ion fluorescent sensors that are the first examples of catalytic DNA biosensors for metal ions. The sensors combine the high selectivity of catalytic DNA with the high sensitivity of fluorescent detection, and can be applied to the quantitative detection of metal ions over a wide concentration range and with high selectivity. The use of DNA sensors in detection and quantification of lead ions in environmental samples such as water from Lake Michigan has been demonstrated. DNA is stable, cost-effective, environmentally benign, and easily adaptable to optical fiber and microarray technology for device manufacture. Thus, the DNA sensors explained here hold great promise for on-site and real-time monitoring of metal ions in the fields of environmental monitoring, developmental biology, clinical toxicology, wastewater treatment, and industrial process monitoring.

Monitoring of particulate matter outdoors

Recent studies of the size and composition of atmospheric particulate matter (PM) have demonstrated the usefulness of separating atmospheric PM into its fine and coarse components. The need to measure the mass and composition of fine and coarse PM separately has been emphasized by research in exposure, epidemiology, and toxicology of atmospheric PM. This paper provides a background on the size distribution and properties of PM relevant to the differences between fine and coarse particles. Various decisions that must be made when deciding how to separate, collect, and measure PM are discussed. Techniques for monitoring fine and coarse particles, including the US Federal Reference Method for PM2.5 and several techniques for PM10-2.5, are presented. Problems encountered in collecting semivolatile PM and in weighing atmospheric PM collected on a filter are described. Continuous monitoring methods for PM mass and for PM components (carbon, nitrate, and sulfate) are described and brief descriptions are given of analytical techniques for the chemical characterization of collected PM. This information should be especially useful for environmental workers familiar with monitoring methods for total suspended particles or PM10 but who will need to measure PM2, and PM10-2.5 in the future.

A Comparative Study of Surface Acid-Base Characteristics of Natural Illites from Different Origins

The acid-base characteristics of naturally occurring illites, collected from different locations, were investigated by potentiometric titrations. The experimental data were interpreted using the constant capacitance surface complexation model. Considerable release of Al and Si from illite samples and subsequent complexation or precipitation of hydroxyl aluminosilicates generated during the acidimetric forward titration and the alkalimetric back titration, respectively, were observed. Therefore, the acidimetric supernatant, rather than the neutral one, was regarded as the system blank for each illite suspension to yield the surface site concentrations. In order to describe the acid-base chemistry of aqueous illite surfaces, two surface proton-reaction models, introducing the corresponding reactions between the dissolved aluminum species and silicic acid, as well as a surface Al-Si complex on homogeneous illite surface sites, were proposed as follows: The K(f2) constant in Model II was obtained by simulating the complex formation between the dissolved aluminum species and silicic acid that occurred in acidimetric supernatant when the hydroxide was added. Additionally, the following cation exchange reaction was also considered for a special case, where a large amount of K(+) is released during the corresponding acidimetric titration, in which a high concentration of protons are consumed. Optimization results indicated that both models could provide a good description of the titration behavior for all aqueous illite systems in this study. The intrinsic acidity constants for the different illites were similar in Model I, showing some generalities in their acid-base properties. Model I may be considered as a simplification of Model II, evident in the similarities between the corresponding constants. In addition, the formation constant for surface Al-Si species (complexes or precipitates) is relatively stable in this study. Copyright 1999 Academic Press.