Sensitive and universal indirect chemiluminescence detection for capillary electrophoresis of cations using cobalt(II) as a probe ion

Detection and separation of proteins using micro/nanofluidics devices

Microfluidics is the technology or system wherein the behavior of fluids' is studied onto a miniaturized device composed of chambers and tunnels. In biological and biomedical sciences, microfluidic technology/system or device serves as an ultra-high-output approach capable of detecting and separating the biomolecules present even in trace quantities. Given the essential role of protein, the identification and quantification of proteins help understand the various living systems' biological function regulation. Microfluidics has enormous potential to enable biological investigation at the cellular and molecular level and maybe a fair substitution of the sophisticated instruments/equipment used for proteomics, genomics, and metabolomics analysis. The current advancement in microfluidic systems' development is achieving momentum and opening new avenues in developing innovative and hybrid methodologies/technologies. This chapter attempts to expound the micro/nanofluidic systems/devices for their wide-ranging application to detect and separate protein. It covers microfluidic chip electrophoresis, microchip gel electrophoresis, and nanofluidic systems as protein separation systems, while methods such as spectrophotometric, mass spectrometry, electrochemical detection, magneto-resistive sensors and dynamic light scattering (DLS) are discussed as proteins' detection system.

Protein separation under a microfluidic regime

Lab-on-a-Chip (LoC), or micro-Total Analysis Systems (μTAS), is recognized as a powerful analytical technology with high capabilities, though end-user products for protein purification are still far from being available on the market. Remarkable progress has been achieved in the separation of nucleic acids and proteins using electrophoretic microfluidic devices, while pintsize devices have been developed for protein isolation according to miniaturized chromatography principles (size, charge, affinity, etc.). In this work, we review the latest advances in the fabrication of components, detection methods and commercial implementation for the separation of biological macromolecules based on microfluidic systems, with some critical remarks on the perspectives of their future development towards standardized microfluidic systems and protocols. An outlook on the current needs and future applications is also presented.

Capillary electrophoresis coupled with in-column fiber-optic laser-induced fluorescence detection for the rapid separation of neodymium

In this study, in-column fiber-optic (ICFO) laser-induced fluorescence (LIF) detection technique is coupled with capillary electrophoresis (CE) for the rapid separation of neodymium for the first time. The effects of buffer concentration, buffer pH, and separation voltage on the CE behaviors, including electrophoretic efficiency and detection sensitivity, are investigated in detail. Under the optimal condition determined in this study (15 mM borate buffer, pH 10.50, separation voltage 24 kV), neodymium could be separated effectively from the neighboring lanthanides (praseodymium and samarium) within several minutes, and the limit of detection for neodymium is estimated to be at the ppt level. The ICFO-LIF-CE system assembled in this study exhibits unique performance characteristics such as low cost and flexibility. Meanwhile, the separation efficiency and detection sensitivity of the assembled CE system are comparable to or somewhat better than those obtained in the previous traditional CE systems, indicating the potential of the assembled CE system for practical applications in the fields of spent nuclear fuel analysis, nuclear waste disposal/treatment, and nuclear forensics.

Comparison of uric Acid quantity with different food in human urine by flow injection chemiluminescence analysis

Based on the inhibitory effect of uric acid (UA) on luminol-Co(2+) chemiluminescence (CL) system, a sensitive method for the determination of UA at nanomolar level by flow injection (FI) CL was proposed. The proposed method was successfully applied to real-time monitoring of UA excretion in human 24 h urine with different food intake, showing that meats, vegetables, and porridge intake caused differential UA excretions of 879, 798, and 742 mg, respectively. It was also found that UA concentrations in urine under the three kinds of food intake simultaneously reached maximum at 2 h after meals with the values of 417, 318, and 288 μg mL(-1), respectively. The UA concentration in human serum was also determined by this approach, and the possible mechanism of luminol-Co(2+)-UA CL reaction was discussed in detail.

An evaluation of the experimental approaches to detection of small ions in CE

This review points out some important trends in the development of the detection techniques for small ions in CE. On the basis of selected literature references it briefly discusses some general requirements on detection techniques in CE. Various optical measurements, mass spectrometric approaches and electrochemical detection techniques are dealt with. Some specific features of microchip CE separation and detection are pointed out and possibilities of dual detection are mentioned. The principal parameters of the above detection techniques are then briefly compared.

Coupling chemiluminescence with capillary electrophoresis to analyze single human red blood cells

In this paper, we describe a new method for determination of hemoglobin of single red blood cells by coupling chemiluminescence with capillary electrophoresis (CL-CE). The chemiluminescent detection is based on the catalytic effects of hemoglobin on the luminol-hydrogen peroxide reaction. The conditions of chemiluminescent reaction and capillary electrophoresis were investigated. Hemoglobin in human blood samples was detected with the present method, the linear range from 1.7 microg mL(-1) to 6.8 microg mL(-1) was tested, and the correlation coefficient of 0.997 and low detection limit of 0.17 microg mL(-1) (approximately 2.2 pg, S/N=3) were obtained. Cell injection procedure was improved, and the method was successfully used to determine hemoglobin of single red blood cells and the statistical result of the average content of hemoglobin in 26 human red blood cells was 23.6 pg. Compared to other current methods, CE with CL system is simple, sensitive and will become an attractive alternative method for single cell analysis.

Chemometrics-assisted simultaneous determination of cobalt(II) and chromium(III) with flow-injection chemiluminescence method

In this paper, a flow-injection chemiluminescence (CL) system is proposed for simultaneous determination of Co(II) and Cr(III) with partial least squares calibration. This method is based on the fact that both Co(II) and Cr(III) catalyze the luminol-H(2)O(2) CL reaction, and that their catalytic activities are significantly different on the same reaction condition. The CL intensity of Co(II) and Cr(III) was measured and recorded at different pH of reaction medium, and the obtained data were processed by the chemometric approach of partial least squares. The experimental calibration set was composed with nine sample solutions using orthogonal calibration design for two component mixtures. The calibration curve was linear over the concentration range of 2 x 10(-7) to 8 x 10(-10) and 2 x 10(-6) to 4 x 10(-9) g/ml for Co(II) and Cr(III), respectively. The proposed method offers the potential advantages of high sensitivity, simplicity and rapidity for Co(II) and Cr(III) determination, and was successfully applied to the simultaneous determination of both analytes in real water sample.

Determination of phenothiazines in pharmaceutical formulations and human urine using capillary electrophoresis with chemiluminescence detection

A CE instrument coupled with chemiluminescence (CL) detection was designed for the determination of promethazine hydrochloride (PTH) and promazine hydrochloride (PMH) in real samples. An important enhancement of the CL emission of luminol with potassium ferricyanide was observed in the presence of these phenothiazines; so this system was selected for their detection after CE separation. Parameters affecting the electrophoretic separation were optimized in a univariate way, while those affecting CL detection were optimized by means of a multivariate approach based on the use of experimental designs. Chemometrics was also employed for the study of the robustness of the factors influencing the postcolumn CL detection. The method allows the separation of the phenothiazines in less than 4 min, achieving LODs of 80 ng/mL for PMH and 334 ng/mL for PTH, using sample injection by gravity. Electrokinetic injection was used to obtain lower LODs for the determination of the compounds in biological samples. The applicability of the CE-CL method was illustrated in the determination of PTH in pharmaceutical formulations and in the analysis of PMH in human urine, using a previous SPE procedure, achieving an LOD of 1 ng/mL and recoveries higher than 85%.

Applicability of Capillary Electrophoresis to the Analysis of Trace Rare Earth Elements in Geological Samples

This study developed a methodology to analyze trace rare earth elements (REEs) in geological materials by capillary electrophoresis (CE). Changed from dilute HNO3 into a water medium by heating, REE ions are detectable at approximately 2 ng mL(-1). In the presence of coexisting elements from geological samples, REE separations were carried out. After sample fusion with Na2O2 and interference separation with ammonium pyrrolidinedithiocarbamate chelate, REE analytes were coprecipitated with Mg(OH)2 at pH 8.5, and then prepared into a water medium for CE determination. Using the standard addition method, this protocol was validated by analyses with better than 5% precision. This method was applied to geological materials; the REE results are in consistence with their certified values. With electrokinetic injection, internal standard (IS) selected among lanthanides is a prerequisite of high-quality REE data. An approach was proposed to derive the IS content for further correcting its contribution from unknown samples.

CE determination of small ions: methods and techniques

This paper provides an overview on the current status of capillary electrophoresis (CE) in the analysis of inorganic and charged small organic species. The various CE strategies used to improve the separation of ionic analytes are summarized. Technical developments in the design of improved detection systems are described. A brief account of their advantages and limitations is given. The potential use of these devices for miniaturized CE systems is also described. Finally, special attention is focused on the on-capillary preconcentration techniques developed in attempts to overcome the poor detectability of CE. Recent review articles are frequently cited to provide readers with a source of information about pioneering work, theoretical treatments, and specific applications.

On-line chemiluminescence detection for isoelectric focusing of heme proteins on microchips

In this paper we present a sensitive chemiluminescence (CL) detection of heme proteins coupled with microchip IEF. The detection principle was based on the catalytic effects of the heme proteins on the CL reaction of luminol-H2O2 enhanced by para-iodophenol. The glass microchip and poly(dimethylsiloxane) (PDMS)/glass microchip for IEF were fabricated using micromachining technology in the laboratory. The modes of CL detection were investigated and two microchips (glass, PDMS/glass) were compared. Certain proteins, such as cytochrome c, myoglobin, and horseradish peroxidase, were focused by use of Pharmalyte pH 3-10 as ampholytes. Hydroxypropylmethylcellulose was added to the sample solution in order to easily reduce protein interactions with the channel wall as well as the EOF. The focused proteins were transported by salt mobilization to the CL detection window. Cytochrome c, myoglobin, and horseradish peroxidase were well separated within 10 min on a glass chip and the detection limits (S/N=3) were 1.2x10(-7), 1.6x10(-7), and 1.0x10(-10) M, respectively.

Electrochemiluminescence quenching as an indirect method for detection of dopamine and epinephrine with capillary electrophoresis

An electrochemiluminescence (ECL) inhibition method was developed as an indirect detection method for the determination of dopamine and epinephrine separated by capillary electrophoresis (CE). When the concentration of Ru(bpy)(3) (2+) was 50 muM diluted by 50 mM phosphate (pH 8.5) in the cell and 0.5 M tripropylamine (TPA) was added to the running buffer (10 mM phosphate, pH 9.0), an inhibition of ECL of the Ru(bpy)(3) (2+)/TPA system by the analytes was observed. Under the optimized conditions, the relative standard deviations of migration time and negative peak area were less than 1% and 3%, respectively, for 1 microM dopamine or 1 microM epinephrine (n = 10). Linear ranges of 0.1-10 microM for both analytes and the detection limits (signal-to-noise ratio S/N = 3) of 10 nM for dopamine and 30 nM for epinephrine were obtained.

A sensitive and rapid immunoassay for quantification of CA125 in human sera by capillary electrophoresis with enhanced chemiluminescence detection

In this paper we have presented a sensitive and rapid immunoassay (IA) method by capillary electrophoresis with an enhanced chemiluminescence detection system (CE-CL) based on the catalytic effects of horseradish peroxidase (HRP) on the luminol-hydrogen peroxide reaction. The conditions for the CL reaction and electrophoresis were systematically investigated using HRP as a model sample. The linear range from 2.5 x 10(-11) to 1.0 x 10(-9) mol/L (R = 0.999), and the detection limit of 1.0 x 10(-12) mol/L (signal-to-noise ratio = 3) for HRP were achieved using para-iodophenol as CL enhancer. The relative standard deviations of the migration time and peak area for 5.0 x 10(-10) mol/L HRP (n = 7) were 0.26 and 4.8%, respectively, using a CE system with a home-built CL detector. Under the optimal condition, the HRP-labeled CA125 antibody (Ab) and the Ab-antigen complex were well separated within 4 min by CE using a high-pH buffer (pH 10.20). The assay was successfully used for quantification of CA125 in human sera from health controls and patients associated with ovarian cancer, and the recoveries of the standard addition experiments were 93-109%. Our primary results demonstrated that IA based on CE-CL detection is a powerful tool for clinical diagnosis combined with these commercial IA kits.

Analytical separations of lanthanides and actinides by capillary electrophoresis

The separation of lanthanide and actinide elements belongs to one of the most challenging tasks of the separation science, due to a great similarity in their physical and chemical properties. The electrophoretic separation can be accomplished in the presence of suitable complex-forming agents, from which alpha-hydroxyisobutyric acid (HIBA) has been used most often. In the most effective capillary electrophoretic mode--capillary zone electrophoresis (CZE)--a complete separation of lanthanide ions can be accomplished within a few minutes. Various electrophoretic methods can be relatively easily adopted for the determinations of individual lanthanide elements in certain kinds of technical materials, concentrates, precursors, etc., where the high speed and low costs of analysis characteristics of capillary electrophoresis (CE) may be advantageously exploited. Electrophoretic techniques may also be employed for speciation studies, especially for examinations of the behavior of actinides in the environment.

Miniaturization of batch- and flow-type chemiluminescence detectors in capillary electrophoresis

Glass and PTFE tubes as detection cells were put in small light-tight boxes to achieve miniaturization of batch-and flow-type chemiluminescence detectors for capillary electrophoresis. These light-tight boxes which included a detection cell and a photosensor module were successfully designed. In the batch-type detector using a glass tube as a detection cell, the influences of a repeated injection of sample and a reagent volume of the detection cell on chemiluminescence intensity were examined in detail. By using 3.8 mm I.D. glass tube including 400 microl chemiluminescence reagent solution, the chemiluminescence peaks were reproducibly observed for the repeated injection experiment up to the eight injection with each run time of 3.0 min. Dansyl-Trp was determined over the range 3 x 10(-8)-1 x 10(-5) M with the detection limit of 0.43 fmol (S/N=3). In the flow-type detector using a PTFE tube as a detection cell, both ends of the PTFE tube were connected to three-way joints; a chemiluminescence reagent solution was delivered into the cell and a capillary was inserted through one of the joints while an electrode was inserted through the other one. Dansyl-Trp was determined over the range 1 x 10(-7)-1 x 10(-5) M with the detection limit of 1.3 fmol (S/N=3). By using the compact flow-type detector, a mixture of dansyl-amino acids was separated and detected in micellar electrokinetic chromatography mode.

Ultrasensitive chemiluminescence detection in capillary electrophoresis

Capillary electrophoresis techniques offer high plate numbers and are highly suited for the efficient separations of a wide variety of chemical components in diverse matrices. Because of the small capillary and detection cell dimensions, together with the minute volumes of samples to be injected, sensitive detection schemes based on different physicochemical principles are being developed. One logical approach to increased sensitivity in capillary electrophoresis detection has been the development of chemiluminescence-based detectors. The development of on-line ultrasensitive chemiluminescence detection (referred to the concentration detection limit of nM order of magnitude or mass detection limit of amol order of magnitude) in capillary electrophoresis system is reviewed. The applications and limitations of the current detection methodology are briefly considered and future prospects for the development are discussed.

Highly sensitive chemiluminescence detection of copper(II) in capillary electrophoresis with field-amplified sample injection

Field-amplified sample injection of copper(II) was investigated using capillary electrophoresis with chemiluminescence detection. The sensitivity of copper(II) has been improved markedly by the field-amplified sample injection technique and the detection limit reaches 2 x 10(-11) M. By injection of a short plug of water before sample introduction, the sensitivity can be further improved 5-fold and the detection limit reaches 4 x 10(-12) M. The relative standard deviations (n = 6) of the migration time and the peak height are 0.61% and 4.7% at 1.0 x 10(-9) M Cu(II), respectively. Parameters affecting the field-amplified sample injection, such as separation voltage and concentration of electrophoretic buffer, have been investigated.