Direct determination of benzodiazepines in biological fluids by restricted-access solid-phase microextraction

Zinc oxide-aluminum oxide nanocomposite solid phase microextraction for diazepam and oxazepam trace determination

A new efficient ZnO-Al2O3 nanocomposite (ZANC) was synthesized to form solid-phase microextraction (SPME) fiber. The prepared fiber was used for trace determination of benzodiazepines by gas chromatography-flame ionization detector in urine samples. The effective parameters on the extraction process including extraction time, salt percentage, desorption time and sample pH were optimized by a factorial design method. The method was evaluated at the optimum conditions and limits of detection (LODs) were calculated 20 µg/L for diazepam and oxazepam. The method repeatability for oxazepam and diazepam (50 µg/L, n = 4) was calculated at 8.8 % and 6.4 %. Also, the method reproducibility was obtained, 7.45 % and 6.61 % for oxazepam and diazepam (50 µg/L, n = 4). Also, fiber-to-fiber relative standard deviation (RSDs%) for the target analytes were less than 15.5 %. The method linearity is within the range of 62-500 µg/L for diazepam and oxazepam. The ZANC-SPME fiber showed a good lifetime (60 times) with high chemical stability. The high thermal stability of ZANC-SPME fiber was attained at 280 °C. The extraction results of poly dimethylsiloxan/divinyl benzene (PDMS/DVB) fiber were compared by ZANC-SPME fiber. Therefore, the method is proposed as a suitable technique for benzodiazepines detection in the urine sample.

High throughput bar adsorptive microextraction: A novel cost-effective tool for monitoring benzodiazepines in large number of biological samples

In this work, we propose an innovative high throughput (HT) apparatus using the bar adsorptive microextraction (BAμE) technique, which enables the simultaneous enrichment of up to 100 samples. This novel configuration was combined with microliquid desorption and high-performance liquid chromatography-diode array detection to monitor trace levels of eight benzodiazepines (diazepam, prazepam, bromazepam, oxazepam, lorazepam, alprazolam, temazepam and loflazepate) in biological samples. The proposed methodology was fully developed, optimized and validated, resulting in suitable intraday and interday precision (RSD ≤ 15%), with recovery yields ranging from 33.0% to 104.5%. The lower limits of quantification were between 20.0 and 100.0 µg L^-1, using 1.0 mL of urine and 0.5 mL of plasma or serum samples. The application of the proposed methodology to real matrices resulted in average sample preparation time of around 2 min per sample, demonstrating that it is user-friendly, cost-effective and a rapid decision-making tool, whenever large number of samples are involved.

A new restricted access molecularly imprinted fiber for direct solid phase microextraction of benzodiazepines from plasma samples

Restricted access molecularly imprinted polymers (RAMIPs) are hybrid materials that present selective binding sites for a template (or similar molecules), and an external hydrophilic layer that avoids the binding of proteins to the material, making them appropriate for the sample preparation of protein fluids.

Rapid determination of designer benzodiazepines, benzodiazepines, and Z-hypnotics in whole blood using parallel artificial liquid membrane extraction and UHPLC-MS/MS

Benzodiazepines (BZD) and Z-hypnotics are frequently analyzed in forensic laboratories, and in 2012, the designer benzodiazepines (DBZD) emerged on the illegal drug scene. DBZD represent a particular challenge demanding new analytical methods. In this work, parallel artificial liquid membrane extraction (PALME) is used for sample preparation of DBZD, BZD, and Z-hypnotics in whole blood prior to UHPLC-MS/MS analysis. PALME of BZD, DBZD, and Z-hypnotics was performed from whole blood samples, and the analytes were extracted across a supported liquid membrane (SLM) and into an acceptor solution of dimethyl sulfoxide and 200 mM formic acid (75:25, v/v). The method was validated according to EMA guidelines. The method was linear throughout the calibration range (R² > 0.99). Intra- and inter-day accuracy and precision, as well as matrix effects, were within the guideline limit of ± 15%. LOD and LLOQ ranged from 0.10 to 5.0 ng mL^-1 and 3.2 to 160 ng mL^-1, respectively. Extraction recoveries were reproducible and above 52%. The method was specific, and the analytes were stable in the PALME extracts for 4 and 10 days at 10 and - 20 °C. No carry-over was observed within the calibration range. PALME and UHPLC-MS/MS for the determination of DBZD, BZD, and Z-hypnotics in whole blood are a green and low-cost alternative that provides high sample throughput (96-well format), extensive sample clean-up, good sensitivity, and high reproducibility. The presented method is also the first method incorporating analysis of DBZD, BZD, and Z-hypnotics in whole blood in one efficient analysis. Graphical abstract.

Benzodiazepines: sample preparation and HPLC methods for their determination in biological samples

Benzodiazepines (BDZs) belong to a group of substances known for their sedative, antidepressive, muscle relaxant, tranquilizer, hypnotic and anticonvulsant properties. Their determination in biological fluids is essential in clinical assays as well as in forensics and toxicological studies. Researchers focus on the development of rapid, accurate, precise and sensitive methods for the determination of BDZs and their metabolites. A large number of analytical methods using different techniques have been reported, but none can be considered as the method of choice. BDZs are usually present at trace levels (microgram or nanogram per milliliter) in a complex biological matrix and the potentially interfering compounds must be isolated by various extraction techniques before analysis. An extended and comprehensive review is presented herein, focusing on sample preparation (pretreatment and extraction) and HPLC conditions applied by different authors. These methods enable bioanalysts to achieve detection limits down to 1-2 ng/ml using UV/diode array detection, readily available in most laboratories, and better than 1 ng/ml using electron capture detection, which is lower than that obtained using a nitrogen phosphorus detector. MS interfaced with electrospray ionization offered a similar sensitivity, while negative chemical ionization MS or sonic spray ionization MS provided sensitivity down to 0.1 ng/ml.

Determination of antibiotic drug concentrations in circulating human blood by means of solid phase micro-extraction

BACKGROUND

Promising results in animals have shown the diagnostic potential of polypyrrole coated SPME fibres introduced directly into the blood stream. This study was intended to extend this technique to a clinically relevant antibiotic drug under close to physiological conditions in human blood.

METHODS

An artificial vein system was built up from heart and lung machine components. Determination of Linezolid (0-15 mug/mL) was performed by SPME from the flowing system ("online", flow velocities 2-50 cm/s), from blood withdrawn from the system ("offline") and by means of a SPE/HPLC method. SPME was done using new fibres ("new") for each analysis, and in the way that one fibre was reused ("re") for one series of measurements.

RESULTS

Drug SPME did not depend on blood flow velocities. Linear regression of data (concentration vs. amount extracted) yielded R(2)=0.998 for SPE/HPLC, R(2)=0.955 for SPME(online_new), 0.929 for SPME(online_re), 0.929 SPME(offline_new), 0.973 for SPME(offline_re), RSD were 52% (SPME(online_new)), 10% (SPME(online_re)), 47% (SPME(offline_new)), 18% (SPME(offline_re)), 8% (SPE/HPLC).

CONCLUSIONS

In-vein SPME has the potential to minimize blood requirement for diagnostic purposes and to speed up analysis of clinically relevant drugs, if inter-fibre variation can be reduced through standardized manufacturing.

Application of solid-phase microextraction in analytical toxicology

Solid-phase microextraction (SPME) is a miniaturized and solvent-free sample preparation technique for chromatographic-spectrometric analysis by which the analytes are extracted from a gaseous or liquid sample by absorption in, or adsorption on, a thin polymer coating fixed to the solid surface of a fiber, inside an injection needle or inside a capillary. In this paper, the present state of practical performance and of applications of SPME to the analysis of blood, urine, oral fluid and hair in clinical and forensic toxicology is reviewed. The commercial coatings for fibers or needles have not essentially changed for many years, but there are interesting laboratory developments, such as conductive polypyrrole coatings for electrochemically controlled SPME of anions or cations and coatings with restricted-access properties for direct extraction from whole blood or immunoaffinity SPME. In-tube SPME uses segments of commercial gas chromatography (GC) capillaries for highly efficient extraction by repeated aspiration-ejection cycles of the liquid sample. It can be easily automated in combination with liquid chromatography but, as it is very sensitive to capillary plugging, it requires completely homogeneous liquid samples. In contrast, fiber-based SPME has not yet been performed automatically in combination with high-performance liquid chromatography. The headspace extractions on fibers or needles (solid-phase dynamic extraction) combined with GC methods are the most advantageous versions of SPME because of very pure extracts and the availability of automatic samplers. Surprisingly, substances with quite high boiling points, such as tricyclic antidepressants or phenothiazines, can be measured by headspace SPME from aqueous samples. The applicability and sensitivity of SPME was essentially extended by in-sample or on-fiber derivatization. The different modes of SPME were applied to analysis of solvents and inhalation narcotics, amphetamines, cocaine and metabolites, cannabinoids, methadone and other opioids, fatty acid ethyl esters as alcohol markers, gamma-hydroxybutyric acid, benzodiazepines, various other therapeutic drugs, pesticides, chemical warfare agents, cyanide, sulfide and metal ions. In general, SPME is routinely used in optimized methods for specific analytes. However, it was shown that it also has some capacity for a general screening by direct immersion into urine samples and for pesticides and other semivolatile substance in the headspace mode.