Kinetics of antigen binding to arrays of antibodies in different sized spots

Design Principles for Enhancing Sensitivity in Paper-Based Diagnostics via Large-Volume Processing

In this work, we characterize the impact of large-volume processing upon the analytical sensitivity of flow-through paper-based immunoassays. Larger sample volumes feature greater molar quantities of available analyte, but the assay design principles which would enable the rapid collection of this dilute target are ill-defined. We developed a finite-element model to explore the operating conditions under which processing large sample volumes via pressure-driven convective flow would yield an improved binding signal. Our simulation results underscore the importance of establishing a high local concentration of the analyte-binding species within the porous substrate. This elevated abundance serves to enhance the binding kinetics, matching the time scale of target capture to the period during which the sample is in contact with the test zone (i.e., the effective residence time). These findings were experimentally validated using the rcSso7d-cellulose-binding domain (CBD) fusion construct, a bifunctional binding protein which adsorbs to cellulose in high abundance. As predicted by our modeling efforts, the local concentration achieved using the rcSso7d-CBD species is uniquely enabling for sensitivity enhancement through large-volume processing. The rapid analyte depletion which occurs at this high surface density also permits the processing of large sample volumes within practical time scales and flow regimes. Using these findings, we present guidance for the optimal means of processing large sample volumes for enhanced assay sensitivity.

A capillary flow-driven microfluidic system for microparticle-labeled immunoassays

A simple and sensitive capillary-driven microfluidic platform is designed and demonstrated for direct and sandwich microparticle-labeled immunoassays.

Dual Electrophoresis Detection System for Rapid and Sensitive Immunoassays with Nanoparticle Signal Amplification

An electrophoretic technique was combined with an enzyme-linked immunosorbent assay (ELISA) system to achieve a rapid and sensitive immunoassay. A cellulose acetate filter modified with polyelectrolyte multilayer (PEM) was used as a solid substrate for three-dimensional antigen-antibody reactions. A dual electrophoresis process was used to induce directional migration and local condensation of antigens and antibodies at the solid substrate, avoiding the long diffusion times associated with antigen-antibody reactions in conventional ELISAs. The electrophoretic forces drove two steps in the ELISA process, namely the adsorption of antigen, and secondary antibody-labelled polystyrene nanoparticles (NP-Ab). The total time needed for dual electrophoresis-driven detection was just 4 min, nearly 2 h faster than a conventional ELISA system. Moreover, the rapid NP-Ab electrophoresis system simultaneously achieved amplification of the specific signal and a reduction in noise, leading to a more sensitive NP-Ab immunoassay with a limit of detection (LOD) of 130 fM, and wide range of detectable concentrations from 0.13 to 130 pM. These results suggest that the combination of dual electrophoresis detection and NP-Ab signal amplification has great potential for future immunoassay systems.

Correlation of Capture Efficiency with the Geometry, Transport, and Reaction Parameters in Heterogeneous Immunosensors

Higher capture efficiency of biomarkers in heterogeneous immunosensors would enable early detection of diseases. Several strategies are used to improve the capture efficiency of these immunosensors including the geometry of the system along with the transport and reaction parameters. Having a prior knowledge of the behavior of the above parameters would facilitate the design of an efficient immunosensor. While the contributions of the transport and reaction parameters toward understanding of the mechanism involved in capture have been well studied in the literature, their effect in combination with the geometry of the sensors has not been explored until now. In this work, we have experimentally demonstrated that the capture efficiency of the antigen-antibody systems is inversely related to the size of the sensor patch. The experimental system was simulated in order to get an in-depth understanding of the mechanism behind the experimental observation. Further, the extent of heterogeneity in the system was analyzed using the Sips isotherm to obtain the heterogeneity index (α) and the reaction rate constant (K(D)) as fitted parameters for a sensor patch of 1.5 mm radius. The experimental kinetic data obtained for the same sensor patch matched reasonably with the simulation results by considering K(D) as the global affinity constant, which indicated that our system can be considered to be homogeneous. Our simulation results associated with the size dependency of the capture efficiency were in agreement with the trends obtained in our experimental observations where an inverse relation was observed owing to the fact that the mass-transfer limitation decreases with the decrease in the size of the sensor patch. The possible underlying mechanism associated with size dependency of capture efficiency was discussed based on the time-dependent radial variation of captured antigens obtained from our simulation results. A study on the parametric variation was further conducted for the nonmixed and mixed systems on the transport (Deff), reaction (K(D)), and geometric parameters (R). Two different correlations were established for the nonmixed and mixed systems between the capture efficiency (f) and a nondimensional number (t(D)/t(R)) consisting of the above-mentioned parameters. Such unified relations will be useful in designing heterogeneous immunosensors and can be extended to microfluidic immunosensors.

Recognition kinetics of biomolecules at the surface of different-sized spheres

Bead-based assay is widely used in many bioanalytical applications involving the attachment of proteins and other biomolecules to the surface. For further understanding of the formation of a sphere-biomolecule complex and easily optimizing the use of spheres in targeted biological applications, it is necessary to know the kinetics of the binding reaction at sphere/solution interface. In our presented work, a simple fluorescence analysis method was employed to measure the kinetics for the binding of biotin to sphere surface-bound FITC-SA, based on the fact that the fluorescence intensity of FITC was proportionally enhanced by increasing the binding amount of biotin. By monitoring the time-dependent changes of FITC fluorescence, it was found that the binding rate constant of biotin to sphere surface-immobilized FITC-SA was much smaller than that of biotin to freely diffusing FITC-SA. This can be attributed to the decreased encounter frequency of the reaction pair, restricted motion of the attached biomolecule, and the weakened steric accessibility of the binding site. These factors would become more obvious when increasing the size of the sphere upon which the FITC-SA was immobilized. Additionally, the effect of nanoparticles on the diffusion-controlled bimolecular binding reaction was more evident than that on the chemical recognition-controlled binding reaction.

Kinetic studies of microfabricated biosensors using local adsorption strategy

Micro/nano scale biosensors integrated with the local adsorption mask have been demonstrated to have a better limit of detection (LOD) and less sample consumptions. However, the molecular diffusions and binding kinetics in such confined droplet have been less studied which limited further development and application of the local adsorption method and imposed restrictions on discovery of new signal amplification strategies. In this work, we studied the kinetic issues via experimental investigations and theoretical analysis on microfabricated biosensors. Mass sensitive film bulk acoustic resonator (FBAR) sensors with hydrophobic Teflon film covering the non-sensing area as the mask were introduced. The fabricated masking sensors were characterized with physical adsorption of bovine serum albumin (BSA) and specific binding of antibody and antigen. Over an order of magnitude improvement on LOD was experimentally monitored. An analytical model was introduced to discuss the target molecule diffusion and binding kinetics in droplet environment, especially the crucial effects of incubation time, which has been less covered in previous local adsorption related literatures. An incubation time accumulated signal amplification effect was theoretically predicted, experimentally monitored and carefully explained. In addition, device optimization was explored based on the analytical model to fully utilize the merits of local adsorption. The discussions on the kinetic issues are believed to have wide implications for other types of micro/nano fabricated biosensors with potentially improved LOD.

Real-time, label-free detection of biomolecular interactions in sandwich assays by the oblique-incidence reflectivity difference technique

One of the most important goals in proteomics is to detect the real-time kinetics of diverse biomolecular interactions. Fluorescence, which requires extrinsic tags, is a commonly and widely used method because of its high convenience and sensitivity. However, in order to maintain the conformational and functional integrality of biomolecules, label-free detection methods are highly under demand. We have developed the oblique-incidence reflectivity difference (OI-RD) technique for label-free, kinetic measurements of protein-biomolecule interactions. Incorporating the total internal refection geometry into the OI-RD technique, we are able to detect as low as 0.1% of a protein monolayer, and this sensitivity is comparable with other label-free techniques such as surface plasmon resonance (SPR). The unique advantage of OI-RD over SPR is no need for dielectric layers. Moreover, using a photodiode array as the detector enables multi-channel detection and also eliminates the over-time signal drift. In this paper, we demonstrate the applicability and feasibility of the OI-RD technique by measuring the kinetics of protein-protein and protein-small molecule interactions in sandwich assays.

Design, synthesis, and characterization of a 39 amino acid peptide mimic of the main immunogenic region of the Torpedo acetylcholine receptor

We have designed a 39 amino acid peptide mimic of the conformation-dependent main immunogenic region (MIR) of the Torpedo acetylcholine receptor (TAChR) that joins three discontinuous segments of the Torpedo α-subunit, α(1-12), α(65-79), and α(110 - 115) with two GS linkers: This 39MIR-mimic was expressed in E. coli as a fusion protein with an intein-chitin-binding domain (IChBD) to permit affinity collection on chitin beads. Six MIR-directed monoclonal antibodies (mAbs) bind to this complex and five agonist/antagonist site directed mAbs do not. The complex of MIR-directed mAb-132A with 39MIR has a Kd of (2.11±0.11)×10(-10)M, which is smaller than (7.13±1.20)×10(-10)M for the complex of mAb-132A with α(1-161) and about the same as 3.4×10(-10)M for that of mAb-132A with TAChR. Additionally, the 39MIR-IChBD adsorbs all MIR-directed antibodies (Abs) from an experimental autoimmune myasthenia gravis (EAMG) rat serum. Hence, the 39MIR-mimic has the potential to inactivate or remove pathogenic Torpedo MIR-directed Abs from EAMG sera and to direct a magic bullet to the memory B-cells that produce those pathogenic Abs. The hope is to use this as a guide to produce a mimic of the human MIR on the way to an antigen specific therapeutic agent to treat MG.

Antibody microarrays: the crucial impact of mass transport on assay kinetics and sensitivity

Although they are superficially similar to DNA microarrays, immunoassay microarrays represent a daunting technological challenge owing to the much wider diversity of proteins. Yet, as the leading edge of bioscience migrates from genomics to proteomics, the complexity and enormous dynamic range of proteins in a cell necessitate an analytic tool with exceptional specificity and sensitivity. In theory, microspot immunoassays could fulfill this need. However, antibody microarrays have had limited success to date, and have often required a highly sensitive detection system and/or sophisticated immobilization approach to be of any use for the profiling of complex specimens. There is a solid body of work on the theory of microspot reaction kinetics, yet much of the published experimental work on protein microarray development pays insufficient attention to the kinetic aspects of this interaction. This review explains that one of the main limitations for the sensitivity of current generation microspot immunoassays is the strong dependence of antibody microspot kinetics upon mass flux to the spot. This not only involves migration of analyte in solution, but also across the surface of the solid phase. Understanding of this effect will be discussed, along with several related effects and their significance to improving existing microarray designs. It is concluded that current efforts may be too focused on areas that cannot improve performance significantly, and that other critical areas of design should receive more attention. Finally, the review addresses the question of whether ambient analyte immunoassay is truly a separate category of microspot assay, with the conclusion that this may be a flawed concept.

Enhancing the detection limit of nanoscale biosensors via topographically selective functionalization

Nanoscale biosensors have remarkable theoretical sensitivities but often suffer from suboptimal limits of detection in practice. This is in part because the sensing area of nanoscale sensors is orders of magnitude smaller than the total device substrate. Current strategies to immobilize probes (capture molecules) functionalize both sensing and nonsensing regions, leading to target depletion and diminished limits of detection. The difference in topography between these regions on nanoscale biosensors offers a way to selectively address only the sensing area. We developed a bottom-up, topographically selective approach employing self-assembled poly(N-isopropylacrylamide) (PNIPAM) hydrogel nanoparticles as a mask to preferentially bind target to only the active sensing region of a photonic crystal (PhC) biosensor. This led to over an order of magnitude improvement in the limit of detection for the device, in agreement with finite element simulations. Since the sensing elements in many nanoscale sensors are topographically distinct, this approach should be widely applicable.

Capillary Array Waveguide Amplified Fluorescence Detector for mHealth

Mobile Health (mHealth) analytical technologies are potentially useful for carrying out modern medical diagnostics in resource-poor settings. Effective mHealth devices for underserved populations need to be simple, low cost, and portable. Although cell phone cameras have been used for biodetection, their sensitivity is a limiting factor because currently it is too low to be effective for many mHealth applications, which depend on detection of weak fluorescent signals. To improve the sensitivity of portable phones, a capillary tube array was developed to amplify fluorescence signals using their waveguide properties. An array configured with 36 capillary tubes was demonstrated to have a ~100X increase in sensitivity, lowering the limit of detection (LOD) of mobile phones from 1000 nM to 10 nM for fluorescein. To confirm that the amplification was due to waveguide behavior, we coated the external surfaces of the capillaries with silver. The silver coating interfered with the waveguide behavior and diminished the fluorescence signal, thereby proving that the waveguide behavior was the main mechanism for enhancing optical sensitivity. The optical configuration described here is novel in several ways. First, the use of capillaries waveguide properties to improve detection of weak florescence signal is new. Second we describe here a three dimensional illumination system, while conventional angular laser waveguide illumination is spot (or line), which is functionally one-dimensional illumination, can illuminate only a single capillary or a single column (when a line generator is used) of capillaries and thus inherently limits the multiplexing capability of detection. The planar illumination demonstrated in this work enables illumination of a two dimensional capillary array (e.g. x columns and y rows of capillaries). In addition, the waveguide light propagation via the capillary wall provides a third dimension for illumination along the axis of the capillaries. Such an array can potentially be used for sensitive analysis of multiple fluorescent detection assays simultaneously. The simple phone based capillary array approach presented in this paper is capable of amplifying weak fluorescent signals thereby improving the sensitivity of optical detectors based on mobile phones. This may allow sensitive biological assays to be measured with low sensitivity detectors and may make mHealth practical for many diagnostics applications, especially in resource-poor and global health settings.

A bioanalytical platform for simultaneous detection and quantification of biological toxins

Prevalent incidents support the notion that toxins, produced by bacteria, fungi, plants or animals are increasingly responsible for food poisoning or intoxication. Owing to their high toxicity some toxins are also regarded as potential biological warfare agents. Accordingly, control, detection and neutralization of toxic substances are a considerable economic burden to food safety, health care and military biodefense. The present contribution describes a new versatile instrument and related procedures for array-based simultaneous detection of bacterial and plant toxins using a bioanalytical platform which combines the specificity of covalently immobilized capture probes with a dedicated instrumentation and immuno-based microarray analytics. The bioanalytical platform consists of a microstructured polymer slide serving both as support of printed arrays and as incubation chamber. The platform further includes an easy-to-operate instrument for simultaneous slide processing at selectable assay temperature. Cy5 coupled streptavidin is used as unifying fluorescent tracer. Fluorescence image analysis and signal quantitation allow determination of the toxin's identity and concentration. The system's performance has been investigated by immunological detection of Botulinum Neurotoxin type A (BoNT/A), Staphylococcal enterotoxin B (SEB), and the plant toxin ricin. Toxins were detectable at levels as low as 0.5-1 ng · mL(-1) in buffer or in raw milk.

Apparent thixotropic properties of saline/glycerol drops with biotinylated antibodies on streptavidin-coated glass slides: implications for bacterial capture on antibody microarrays

The thixotropic-like properties of saline/glycerol drops, containing biotinylated capture antibodies, on streptavidin-coated glass slides have been investigated, along with their implications for bacterial detection in a fluorescent microarray immunoassay. The thixotropic-like nature of 60:40 saline-glycerol semisolid droplets (with differing amounts of antibodies) was observed when bacteria were captured, and their presence detected using a fluorescently-labeled antibody. Semisolid, gel-like drops of biotinylated capture antibody became liquefied and moved, and then returned to semisolid state, during the normal immunoassay procedures for bacterial capture and detection. Streaking patterns were observed that indicated thixotropic-like characteristics, and this appeared to have allowed excess biotinylated capture antibody to participate in bacterial capture and detection. When developing a microarray for bacterial detection, this must be considered for optimization. For example, with the appropriate concentration of antibody (in this study, 0.125 ng/nL), spots with increased diameter at the point of contact printing (and almost no streaking) were produced, resulting in a maximal signal. With capture antibody concentrations greater than 0.125 ng/nL, the excess biotinylated capture antibody (i.e., that which was residing in the three-dimensional, semisolid droplet space above the surface) was utilized to capture more bacteria. Similarly, when the immunoassay was performed within a hydrophobic barrier (i.e., without a coverslip), brighter spots with increased signal were observed. In addition, when higher concentrations of cells (∼10⁸ cells/mL) were available for capture, the importance of unbound capture antibody in the semisolid droplets became apparent because washing off the excess, unbound biotinylated capture antibody before the immunoassay was performed reduced the signal intensity by nearly 50%. This reduction in signal was not observed with lower concentrations of cells (∼10⁶ cells/mL). With increased volumes of capture antibody, abnormal spots were visualized, along with decreased signal intensity, after bacterial detection, indicating that the increased droplet volume detrimentally affected the immunoassay.

Advanced technologies for studies on protein interactomes

One of the key challenges of biology in the post-genomic era is to assign function to the many genes revealed by large-scale sequencing programmes, since only a small fraction of gene function can be directly inferred from the coding sequence. Identifying interactions between proteins is a substantial part in understanding their function. The main technologies for investigating protein-protein interactions and assigning functions to proteins include direct detection intermolecular interactions through protein microarray, yeast two-hybrid system, mass spectrometry fluorescent techniques to visualize protein complexes or pull-down assays, as well as technologies detecting functional interactions between genes, such as RNAi knock down or functional screening of cDNA libraries. Over recent years, considerable advances have been made in the above techniques. In this review, we discuss some recent developments and their impact on the gene function annotation.

Array feature size influences nucleic acid surface capture in DNA microarrays

Analyte affinity capture by surface-immobilized diagnostic agents is a routinely used assay format for profiling numerous medically and technologically important target analytes. These assays suffer from numerous performance limitations, including sensitivity and rapidity. Assay miniaturization is advocated to improve surface-capture performance, specifically exploiting the inverse relationship between analyte flux and capture feature size under mass transfer-limiting capture conditions that characterize many such assay formats. Reduced capture feature sizes, e.g., microarrays, are proposed to overcome mass transfer limitations, yet this is difficult to achieve across several size scales. This study validates certain advantages advocated for capture spot miniaturization using a rationale to understand surface capture miniaturization strategies. Experimentally derived immobilized ligand and target capture densities as a function of microspot size for DNA oligomers immobilized on model gold substrates are compared directly with theoretical analysis, validating the hypothesis that miniaturization yields many practical assay advantages. Specifically, results show that transitions from assay mass transfer limiting to kinetically limiting conditions as feature size decreases identify an optimal microspot size range for a specific bioassay system. Analytical advantages realized from such assay miniaturization are more uniform target-spot coverage and substantially increased rate of capture (hybridization), increasing assay signal and rapidity.

The array biosensor: portable, automated systems

With recent advances in surface chemistry, microfluidics, and data analysis, there are ever increasing reports of array-based methods for detecting and quantifying multiple targets. However, only a few systems have been described that require minimal preparation of complex samples and possess a means of quantitatively assessing matrix effects. The NRL Array Biosensor has been developed with the goal of rapid and sensitive detection of multiple targets from multiple samples analyzed simultaneously. A key characteristic of this system is its two-dimensional configuration, which allows controls and standards to be analyzed in parallel with unknowns. Although the majority of our work has focused on instrument automation and immunoassay development, we have recently initiated efforts to utilize alternative recognition molecules, such as peptides and sugars, for detection of a wider variety of targets. The array biosensor has demonstrated utility for a variety of applications, including food safety, disease diagnosis, monitoring immune response, and homeland security, and is presently being transitioned to the commercial sector for manufacturing.

Peptide Aptamers in Label-Free Protein Detection: 1. Characterization of the Immobilized Scaffold

Protein microarray development is absolutely dependent upon the ability to construct interfaces capable of specific, stable, sensitive, and designable recognition of specific proteins. Peptide aptamers, being peptide recognition moieties presented and constrained by a robust scaffold protein, offer one possible solution. The relative uniformity of a scaffold protein across potentially many thousands of arrayed peptide aptamers is predicted to simplify the production of microarrays. This paper describes the generation and assaying characteristics of a scaffold protein adlayer. Orientational control of the scaffold protein STM, a triply mutated form of the stable intracellular protein inhibitor stefin A is achieved with a surface cysteine residue, which leads to the presentation of the scaffold recognition surface to solution. Operational stability of the system is excellent, with only a minor decrease in detection sensitivity over time (less than 1% h-1). We use this system to establish a surface plasmon resonance assay offering a limit of detection of 1 nM (150 ng mL-1) and determine the affinity constant of interaction of STM for a cognate antibody to be KD = 1.47 +/- 0.23 nM. Thus, we have established a solid foundation for the future creation of highly multiplexed peptide aptamer microarrays that will be compatible with a broad range of label-free detection technologies.

Array biosensor for detection of ochratoxin A in cereals and beverages

Contamination of food by mycotoxins occurs in minute quantities, and therefore, there is a need for a highly sensitive and selective device that can detect and quantify these organic toxins. We report the development of a rapid and highly sensitive array biosensor for the detection and quantitation of ochratoxin A (OTA). The array biosensor utilizes a competitive immunoassay format. Immobilized OTA derivatives compete with toxin in solution for binding to fluorescent anti-OTA antibody spiked into the sample. This competition is quantified by measuring the formation of the fluorescent immunocomplex on the waveguide surface. The fluorescent signal is inversely proportional to the concentration of OTA in the sample. Analyses for OTA in buffer and a variety of food and beverage samples were performed. Samples were extracted with methanol, without any sample cleanup or preconcentration step prior to analysis. The limit of detection for OTA in several cereals ranged from 3.8 to 100 ng/g, while in coffee and wine, detection limits were 7 and 38 ng/g, respectively.

Optimal design of microarray immunoassays to compensate for kinetic limitations: theory and experiment

In this report we examine the limitations of existing microarray immunoassays and investigate how best to optimize them using theoretical and experimental approaches. Derived from DNA technology, microarray immunoassays present a major technological challenge with much greater physicochemical complexity. A key physicochemical limitation of the current generation of microarray immunoassays is a strong dependence of antibody microspot kinetics on the mass flux to the spot as was reported by us previously. In this report we analyze, theoretically and experimentally, the effects of microarray design parameters (incubation vessel geometry, incubation time, stirring, spot size, antibody-binding site density, etc.) on microspot reaction kinetics and sensitivity. Using a two-compartment model, the quantitative descriptors of the microspot reaction were determined for different incubation and microarray design conditions. This analysis revealed profound mass transport limitations in the observed kinetics, which may be slowed down as much as hundreds of times compared with the solution kinetics. The data obtained were considered with relevance to microspot assay diffusional and adsorptive processes, enabling us to validate some of the underlying principles of the antibody microspot reaction mechanism and provide guidelines for optimal microspot immunoassay design. For an assay optimized to maximize the reaction velocity on a spot, we demonstrate sensitivities in the am and low fm ranges for a system containing a representative sample of antigen-antibody pairs. In addition, a separate panel of low abundance cytokines in blood plasma was detected with remarkably high signal-to-noise ratios.

Diagnostic and analytical applications of protein microarrays

DNA microarrays have changed the field of biomedical sciences over the past 10 years. For several reasons, antibody and other protein microarrays have not developed at the same rate. However, protein and antibody arrays have emerged as a powerful tool to complement DNA microarrays during the past 5 years. A genome-scale protein microarray has been demonstrated for identifying protein-protein interactions as well as for rapid identification of protein binding to a particular drug. Furthermore, protein microarrays have been shown as an efficient tool in cancer profiling, detection of bacteria and toxins, identification of allergen reactivity and autoantibodies. They have also demonstrated the ability to measure the absolute concentration of small molecules. Besides their capacity for parallel diagnostics, microarrays can be more sensitive than traditional methods such as enzyme-linked immunosorbent assay, mass spectrometry or high-performance liquid chromatography-based assays. However, for protein and antibody arrays to be successfully introduced into diagnostics, the biochemistry of immunomicroarrays must be better characterized and simplified, they must be validated in a clinical setting and be amenable to automation or integrated into easy-to-use systems, such as micrototal analysis systems or point-of-care devices.

Kinetics of antigen binding to antibody microspots: strong limitation by mass transport to the surface

It is well documented that diffusion has generally a strong effect on the binding kinetics in the microtiter plate immunoassays. However, a systematic quantitative experimental evaluation of the microspot kinetics is still missing in the literature. Our work aims at filling this important gap of knowledge on the example of antigen binding to antibody microspots. A mathematical model was derived within the framework of two-compartment model and applied to the quantitative analysis of the experimental data obtained for typical antibody microspot assays. A strong mass-transport dependence of the antigen-antibody microspot kinetics was identified to be one of the main restrictions of this new technology. The binding reactions are slowed down in the microspot immunoassays by several orders of magnitude as compared with the corresponding well-stirred bulk reactions. The task to relax the mass-transport limitations should thus be one of the most important issues in designing the antibody microarrays. These limitations notwithstanding, the detection range of more than five orders of magnitude and the high sensitivity in the low femtomolar range were experimentally achieved in our study, demonstrating thus an enormous potential of this highly capable technology.

Protein microarrays on hybrid polymeric thin films prepared by self-assembly of polyelectrolytes for multiple-protein immunoassays

We report here the development and characterization of protein microarrays fabricated on nanoengineered 3-D polyelectrolyte thin films (PET) deposited on glass slide by consecutive adsorption of polyelectrolytes via self-assembly technique. Antibodies or antigens were immobilized in the PET-coated glass slides by electrostatic adsorption and entrapment of porous structure of the 3-D polymer film and thus establishing a platform for parallel analysis. Both antigen and antibody microarrays were fabricated on the PET-coated slides, and direct and indirect immunoassays on protein microarrays for multiple-analyte detection were demonstrated. Microarrays produced on these PET-coated slides have consistent spot morphology and provide performance features needed for proteomic analysis. The protein microarrays on the PET films provide LOD as low as 6 pg/mL and dynamic ranges up to three orders of magnitude, which are wider than the protein microarrays fabricated on aldehyde and poly-L-lysine functionalized slides. The PET films constructed by self-assembly technique in aqueous solution is green chemistry based, cost-effective method to generate 3-D thin film coatings on glass surface, and the coated slide is well suited for immobilizing many types of biological molecules so that a wide variety of microarray formats can be developed on this type of slide.

Multiplexed measurement of serum antibodies using an array biosensor

The array biosensor provides the capability for simultaneously measuring titers of antibody against multiple antigens. Human antibodies against four different targets, tetanus toxin, diphtheria toxin, staphylococcal enterotoxin B (SEB) and hepatitis B, were measured simultaneously in sera from eight different donors in a single assay and titers were determined. The assays could measure amounts of bound antibody as low as approximately 100 fg. Each individual serum exhibited a different pattern of reactivity against the four target antigens. Applications of this biosensor capability include monitoring for exposure to pathogens and for efficacy of vaccination.

Simultaneous determination of kinetic parameters for the binding of cholera toxin to immobilized sialic acid and monoclonal antibody using an array biosensor

Interactions between protein toxins and carbohydrate receptors are often semi-selective processes and the kinetic parameters that define the binding of a receptor to different toxins may vary with each interaction. In this study, we have determined the affinity constants for binding of cholera toxin (CT) to immobilized sialic acid and to anti-CT antibody (as a simultaneous reference) by measuring real-time binding processes using an array biosensor. N-Acetylneuraminic acid (Neu5Ac), a member of the sialic acid family, was covalently immobilized onto maleimide-activated planar waveguides via a thiol-terminated linker attached to the anomeric carbon of the sugar. Control antibodies were immobilized using two different approaches: covalent attachment onto maleimide-activated slides via the thiol on cysteine residues and non-covalent attachment using a biotin-NeutrAvidin linkage. Cy5-labeled CT was flowed over the immobilized receptors and the fluorescent intensity of the bound CT-receptor complex was recorded as a function of time. The association constants for CT binding to covalently attached Neu5Ac, to covalently attached anti-CT monoclonal antibody, and to antibody tethered by biotin-NeutrAvidin interactions were determined to be 1.3 x 10(8), 2.1 x 10(8) and 5.7 x 10(8)M(-1), respectively.

Improvement of the performance of an immunoaffinity extraction method via region-specific immobilization of IgG

Using papaverine as a model target, an immunoaffinity column of high selectivity and binding capacity was prepared by utilizing covalent linkage between the Fc portion of IgG and the surface of Sepharose 4B support. Compared with the commonly used random coupling method, the binding capacity of the region-specific immobilized antibodies was increased from 0.04 to 0.2 mol of antigens/mol of antibodies and a much larger concentration factor was thus achieved. The obtained immunoaffinity column has been successfully used in pretreatment of pericarpium papaveris samples. The method offers an improved approach to immunoaffinity extraction that should be useful for purification and concentration of other targeted compounds in highly complex mixture.

Use of Porous Membranes Modified with Polyelectrolyte Multilayers as Substrates for Protein Arrays with Low Nonspecific Adsorption

Coating of substrates with polyelectrolyte multilayers terminated with poly(acrylic acid) (PAA) followed by activation of the free -COOH groups of PAA provides a surface that readily reacts with amine groups to allow covalent immobilization of antibodies. The use of this procedure to prepare arrays of antibodies in porous alumina supports facilitates construction of a flow-through system for analysis of fluorescently labeled antigens. Detection limits in the analysis of Cy5-labeled IgG are 0.02 ng/mL because of the high surface area of the alumina membrane, and the minimal diameter of the substrate pores results in binding limited by kinetics, not mass transport. Moreover, PAA-terminated films resist nonspecific protein adsorption, so blocking of antibody arrays with bovine serum albumin is not necessary. These microarrays are capable of effective analysis in 10% fetal bovine serum.

Biosensor detection of botulinum toxoid A and staphylococcal enterotoxin B in food

Immunoassays were developed for the simultaneous detection of staphylococcal enterotoxin B and botulinum toxoid A in buffer, with limits of detection of 0.1 ng/ml and 20 ng/ml, respectively. The toxins were also spiked and measured in a variety of food samples, including canned tomatoes, sweet corn, green beans, mushrooms, and tuna.

A “do-it-yourself” array biosensor

We have developed an array biosensor for the simultaneous detection of multiple targets in multiple samples within 15-30 min. The biosensor is based on a planar waveguide, a modified microscope slide, with a pattern of small (mm2) sensing regions. The waveguide is illuminated by launching the emission of a 635 nm diode laser into the proximal end of the slide via a line generator. The evanescent field excites fluorophores bound in the sensing region and the emitted fluorescence is measured using a Peltier-cooled CCD camera. Assays can be performed on the waveguide in multichannel flow chambers and then interrogated using the detection system described here. This biosensor can detect many different targets, including proteins, toxins, cells, virus, and explosives with detection limits rivaling those of the ELISA detection system.

Antimicrobial Peptides for Detection of Bacteria in Biosensor Assays

Bacteria, plants, and higher and lower animals have evolved an innate immune system as a first line of defense against microbial invasion. Some of these organisms produce antimicrobial peptides (AMPs) as a part of this chemical immune system. AMPs exert their antimicrobial activity by binding to components of the microbe's surface and disrupting the membrane. The overall goal of this study was to apply the AMP magainin I as a recognition element for Escherichia coli O157:H7 and Salmonella typhimurium detection on an array-based biosensor. We immobilized magainin I on silanized glass slides using biotin-avidin chemistry, as well as through direct covalent attachment. Cy5-labeled, heat-killed cells were used to demonstrate that the immobilized magainin I can bind Salmonella with detection limits similar to analogous antibody-based assays. Detection limits for E. coli were higher than in analogous antibody-based assays, but it is expected that other AMPs may possess higher affinities for this target. The results showed that both specific and nonspecific binding strongly depend on the method used for peptide immobilization. Direct attachment of magainin to the substrate surface not only decreased nonspecific cell binding but also resulted in improved detection limits for both Salmonella and E. coli.

Decoration of discretely immobilized cowpea mosaic virus with luminescent quantum dots

This report describes two related methods for decorating cowpea mosaic virus (CPMV) with luminescent semiconductor nanocrystals (quantum dots, QDs). Variants of CPMV are immobilized on a substrate functionalized with NeutrAvidin using modifications of biotin-avidin binding chemistry in combination with metal affinity coordination. For example, using CPMV mutants expressing available 6-histidine sequences inserted at loops on the viral coat protein, we show that these virus particles can be specifically immobilized on NeutrAvidin functionalized substrates in a controlled fashion via metal-affinity coordination. To accomplish this, a hetero-bifunctional biotin-NTA moiety, activated with nickel, is used as the linker for surface immobilization of CPMV (bridging the CPMVs' histidines to the NeutrAvidin). Two linking chemistries are then employed to achieve CPMV decoration with hydrophilic CdSe-ZnS core-shell QDs; they target the histidine or lysine residues on the exterior virus surface and utilize biotin-avidin interactions. In the first scheme, QDs are immobilized on the surface-tethered CPMV via electrostatic attachment to avidin previously bound to the virus particle. In the second strategy, the lysine residues common to each viral surface asymmetric unit are chemically functionalized with biotin groups and the biotinylated CPMV is discretely immobilized onto the substrate via NeutrAvidin-biotin interactions. The biotin units on the upper exposed surface of the immobilized CPMV then serve as capture sites for QDs conjugated with a mixture of avidin and a second protein, maltose binding protein, which is also used for QD-protein conjugate purification. Characterization of the assembled CPMV and QD structures is presented, and the potential uses for protein-coated QDs functionalized onto this symmetrical virion nanoscaffold are discussed.

Modeling and Optimization of High-Sensitivity, Low-Volume Microfluidic-Based Surface Immunoassays

Microfluidics are emerging as a promising technology for miniaturizing biological assays for applications in diagnostics and research in life sciences because they enable the parallel analysis of multiple analytes with economy of samples and in short time. We have previously developed microfluidic networks for surface immunoassays where antibodies that are immobilized on one wall of a microchannel capture analytes flowing in the microchannel. This technology is capable of detecting analytes with picomolar sensitivity and from sub-microliter volume of sample within 45 min. This paper presents the theoretical modeling of these immunoassays where a finite difference algorithm is applied to delineate the role of the transport of analyte molecules in the microchannel (convection and diffusion), the kinetics of binding between the analyte and the capture antibodies, and the surface density of the capture antibody on the assay. The model shows that assays can be greatly optimized by varying the flow velocity of the solution of analyte in the microchannels. The model also shows how much the analyte-antibody binding constant and the surface density of the capture antibodies influence the performance of the assay. We then derive strategies to optimize assays toward maximal sensitivity, minimal sample volume requirement or fast performance, which we think will allow further development of microfluidic networks for immunoassay applications.

Antibody Arrays Prepared by Cutinase-Mediated Immobilization on Self-Assembled Monolayers

Antibody arrays hold considerable potential in a variety of applications including proteomics research, drug discovery, and diagnostics. Many of the schemes used to fabricate the arrays fail to immobilize the antibodies at a uniform density or in a single orientation; consequently, the immobilized antibodies recognize their antigens with variable efficiency. This paper describes a strategy to immobilize antibodies in a single orientation, with a controlled density, using the covalent interaction between cutinase and its suicide substrate. Protein fusions between cutinase and five antibodies of three different types (scFv, V(HH), and FN3) were prepared and immobilized upon self-assembled monolayers (SAMs) presenting a phosphonate capture ligand. The immobilized antibodies exhibit high affinity and selectivity for their target antigens, as monitored by surface plasmon resonance and fluorescence scanning. Furthermore, by changing the density of capture ligand on the SAM the density of the immobilized antibody could be controlled. The monolayers, which also present a tri(ethylene glycol) group, are inert to nonspecific adsorption of proteins and allow the detection of a specific antigen in a complex mixture. The demonstration of cutinase-directed antibody immobilization with insert SAMs provides a straightforward and robust method for preparing antibody chips.

Surface-immobilized self-assembled protein-based quantum dot nanoassemblies

Luminescent semiconductor quantum dot (QD)-based optical biosensors have the potential to overcome many of the limitations associated with using conventional organic dyes for biodetection. We have previously demonstrated a hybrid QD-protein-based fluorescence resonance energy transfer (FRET) sensor. Although the QD acted as an energy donor and a protein scaffold in the sensor, recognition and specificity were derived from the proteins. Transitioning this hybrid prototype sensor into flow cells and integrated devices will require a surface-immobilization strategy that allows the QD-based sensor to sample the environment and still maintain a distinct protein-covered QD architecture. We demonstrate a self-assembled strategy designed to accomplish this. Using glass slides coated with a monolayer of neutravidin (NA) as the template, QDs with maltose binding protein (MBP) and avidin coordinated to their surface were attached to the glass slides in discrete patterns using an intermediary bridge of biotinylated MBP or antibody linkers. Control of the surface location and concentration of the QD-protein-based structures is demonstrated. The utility of this self-assembly strategy is further demonstrated by assembling a QD-protein structure that allows the QDs to engage in FRET with a dye located on the surface-covering protein.

Real-time analysis of protein adsorption to a variety of thin films

The ability of a fluorescence-based array biosensor to screen surfaces for the adsorption of biomolecules in real-time is demonstrated. Glass microscope slides were coated with silanes, including 3-mercaptopropyl-triethoxysilane, 3-glycidyloxypropyltrimethoxysilane, 3-aminopropyltrimethoxy-silane, octadecyl-trichlorosilane, and 2-methoxy((polyethylenoxy)propyl)tri-methoxysilane, or with polymer thin films, including polystyrene, polyimide, sol-gel, poly(dimethylsiloxane), and agarose. The adsorption of Cy5-labeled proteins, bovine serum albumin, fibrinogen, and lysozyme onto these surfaces was measured using total internal reflection spectroscopy over a period of 50 min. The majority of the modified surfaces, apart from notable exceptions including the thiol silane and PDMS, behaved as expected upon protein adsorption, and the observations could be related to the properties of both the individual surfaces and proteins. This study highlights the complex nature of the mechanisms involved when a protein interacts at a solid-liquid interface. However, it also demonstrates a comparatively generic method with which to screen surfaces for their protein resistant properties and to measure surface interactions in real time. Furthermore, since the array biosensor can perform multiple measurements simultaneously, the interactions of a variety of proteins with a single surface can be monitored.

Detection of Salmonella enterica serovar typhimurium by using a rapid, array-based immunosensor

The multianalyte array biosensor (MAAB) is a rapid analysis instrument capable of detecting multiple analytes simultaneously. Rapid (15-min), single-analyte sandwich immunoassays were developed for the detection of Salmonella enterica serovar Typhimurium, with a detection limit of 8 x 10(4) CFU/ml; the limit of detection was improved 10-fold by lengthening the assay protocol to 1 h. S. enterica serovar Typhimurium was also detected in the following spiked foodstuffs, with minimal sample preparation: sausage, cantaloupe, whole liquid egg, alfalfa sprouts, and chicken carcass rinse. Cross-reactivity tests were performed with Escherichia coli and Campylobacter jejuni. To determine whether the MAAB has potential as a screening tool for the diagnosis of asymptomatic Salmonella infection of poultry, chicken excretal samples from a private, noncommercial farm and from university poultry facilities were tested. While the private farm excreta gave rise to signals significantly above the buffer blanks, none of the university samples tested positive for S. enterica serovar Typhimurium without spiking; dose-response curves of spiked excretal samples from university-raised poultry gave limits of detection of 8 x 10(3) CFU/g.

Detection of Campylobacter and Shigella Species in Food Samples Using an Array Biosensor

Campylobacter and Shigella bacteria are common causes of food- and water-borne illness worldwide. There is a current need in food, medical, environmental, and military markets for a rapid and user-friendly method of detecting such pathogens. The array biosensor developed at the NRL encompasses these qualities. In this study, 25-min, sandwich immunoassays were developed for the detection of Campylobacter and Shigella species in both buffer and a variety of food and beverage samples. The limit of detection for Shigella dysenteriae in buffer and chicken carcass wash was 4.9 x 10(4) cfu mL(-)(1), whereas Campylobacter jejuni could be measured at concentrations as low as 9.7 x 10(2) cfu mL(-)(1). The limits of detection and dynamic range were found to vary depending on the sample matrix, but could be improved by running the sample over the waveguide surface for longer periods of time. Samples were run with no preconcentration or enrichment steps and little-to-no sample pretreatment prior to analysis.

Proteomics

Fueled by ever-growing DNA sequence information, proteomics-the large scale analysis of proteins-has become one of the most important disciplines for characterizing gene function, for building functional linkages between protein molecules, and for providing insight into the mechanisms of biological processes in a high-throughput mode. It is now possible to examine the expression of more than 1000 proteins using mass spectrometry technology coupled with various separation methods. High-throughput yeast two-hybrid approaches and analysis of protein complexes using affinity tag purification have yielded valuable protein-protein interaction maps. Large-scale protein tagging and subcellular localization projects have provided considerable information about protein function. Finally, recent developments in protein microarray technology provide a versatile tool to study protein-protein, protein-nucleic acid, protein-lipid, enzyme-substrate, and protein-drug interactions. Other types of microarrays, though not fully developed, also show great potential in diagnostics, protein profiling, and drug identification and validation. This review discusses high-throughput technologies for proteome analysis and their applications. Also discussed are the approaches used for the integrated analysis of the voluminous sets of data generated by proteome analysis conducted on a global scale.

Detection of staphylococcal enterotoxin B in spiked food samples

Contamination of food with infectious agents, intentional or not, is a global concern with far-reaching economic and social impact. Staphylococcal enterotoxins are a major cause of food poisoning, but most methods for the identification of these agents in food require extensive pretreatment or concentration of the sample prior to analysis. The array biosensor was developed as a portable device for the simultaneous analysis of multiple complex samples for multiple targets with minimal sample preparation. In this study, we use an array biosensor to expand and improve on a staphylococcal enterotoxin B (SEB) assay with the ultimate intent of incorporating testing for SEB into a battery of sensitive and convenient assays for food safety validation. In addition to buffer studies, six different types of food samples, including beverages, homogenates of fruit and meat, and carcass washings, were spiked with SEB, incubated for at least 2 h to permit antigen sequestration, and assayed. For all samples, there were differences in fluorescence intensity, but 0.5 ng of SEB per ml could be detected in <20 min with little if any pretreatment and no sample preconcentration.

A Filtration-Based Protein Microarray Technique

Protein microarrays are an emerging technology for studying protein expression profiling and protein functions. However, with the current design approaches, the overall performance of protein microarrays can be compromised by diffusion-limited kinetics. We developed a new protein microarray platform that utilizes a filtration assay with protein microarrays printed on protein-permeable nitrocellulose filter membranes. Compared with protein microarrays assayed with the conventional incubation-shaking method, this new approach overcomes the diffusion limit. We demonstrated that this novel technique can improve the overall reaction kinetic rate by 10-fold, yield a dynamic range of 4 decades, and enhance the assay sensitivity and specificity. Further, using multistacking protein chips, at least 14 chips can be probed simultaneously, with 22400 different reactions in a single assay. The advantages of large fluorescent dyes, such as phycobilisome and quantum dots, can be better exploited using the filtration assay. The potential clinical applications of the filtration-based protein microarrays were demonstrated by detecting carcinoembryonic antigen in human plasma samples.