Partial reduction and two-step modification of proteins for identification of disulfide bonds

Disulfide linkage assignment based on reducing electrochemistry and mass spectrometry using a lead electrode

The study of disulfide linkage is a crucial part of the quality assessment of biopharmaceutical products because disulfide bonds stabilize the tertiary structure of proteins and maintain protein functions. Therefore, a suitable method is highly required for disulfide linkage assignment when nested disulfide bonds formed with closely spaced cysteine residues. A novel approach for disulfide linkage assignment of disulfide-rich peptides and proteins via electrochemical reduction on a lead electrode with mass spectrometry is presented in this paper. The method features partial electrochemical reduction and alkylation of peptides followed by alkylated peptide sequencing based on tandem mass spectrometry. Lead was chosen for the first time as an electrode material for disulfide bond reduction, because it has the advantages of maintenance free (only infrequent polishing needed), easy operation in DC mode, and reusability. Without any special sample preparation and any chemical reduction agents, disulfide bond in peptides can be cleaved rapidly. The new method was successfully tested with two peptides and one protein containing nested disulfide bonds.

Experimental Assignment of Disulfide-Bonds in Purified Proteins

The formation of disulfide bonds in proteins is an important post-translational modification that is critical for stabilizing the native structures of proteins, particularly proteins exposed to oxidizing environments. For this reason, most cysteines in secreted proteins or protein domains on the surface of the cell are in disulfides, whereas most cysteines in the cytoplasm are in the unmodified -SH form. Disulfide linkages must be experimentally determined, as they cannot be predicted from amino acid sequence. These assignments provide insights into three-dimensional structure and contribute to the understanding of structural-functional relationships. This unit details a series of protocols that have been applied successfully to map disulfide bonds in proteins. The general strategy involves chemical or proteolytic cleavage of the protein followed by chromatographic separation of the resultant peptides. Mass spectrometry is used to identify disulfide-containing peptides and determine sites of disulfide linkage. A partial reduction and alkylation strategy for mapping disulfide linkages in peptides with multiple disulfide bonds is also presented. © 2019 by John Wiley & Sons, Inc.

Disulfide bond characterization of human factor Xa by mass spectrometry through protein-level partial reduction

Protein-level partial reduction was investigated as a novel sample preparation technique to characterize proteins with cystine knots or complex disulfide linkages. Human Factor Xa containing twelve disulfide bonds was selected as a model protein to demonstrate this methodology. Five in twelve disulfide linkages were characterized through conventional non-reduced samples while the other seven disulfide linkages containing cystine knots were successfully characterized though partially reduced samples. Each disulfide linkage was confirmed through product ions generated by an UPLC-ESI QTOF MS system equipped with data independent collision-induced dissociation (CID) acquisition. Free cysteines in the sample were also determined in this study.

PADLOC: a powerful tool to assign disulfide bond connectivities in peptides and proteins by NMR spectroscopy

The determination of the disulfide bond connectivity in a peptide or protein represents a significant challenge. It is notoriously difficult to use NMR spectroscopy to assign disulfide connectivities because NMR spectra lack direct evidence for disulfide bonds. These bonds are typically inferred from three-dimensional structure calculations, which can result in ambiguous disulfide assignment. Here, we present a new NMR based methodology, in which the disulfide connectivity is obtained by applying Bayesian rules of inference to the local topology of cysteine residues. We illustrate how this approach successfully predicts the disulfide connectivity in proteins for which crystal structures are available in the protein data bank (PDB). We also demonstrate how this methodology is used with experimental NMR data for peptides with complex disulfide topologies, including hepcidin, Kalata-B1, and μ-Conotoxin KIIIA. In the case of μ-Conotoxin KIIIA, the PADLOC connectivity (1-15,2-9,4-16) differs from previously published results; additional evidence is presented demonstrating unequivocally that this newly proposed connectivity is correct.

Analysis of the disulfide bond arrangement of the HIV-1 envelope protein CON-S gp140 ΔCFI shows variability in the V1 and V2 regions

Disulfide bonding of cysteines is one of the most important protein modifications, and it plays a key role in establishing/maintaining protein structures in biologically active forms. Therefore, the determination of disulfide bond arrangement is one important aspect to understanding the chemical structure of a protein and defining its functional domains. Herein, aiming to understand how the HIV-1 envelope protein's structure influences its immunogenicity, we used an MS-based approach, liquid chromatography electrospray ionization Fourier transform ion cyclotron resonance (LC/ESI-FTICR) mass spectrometry, to determine the disulfide linkages on an oligomeric form of the group M consensus HIV-1 envelope protein (Env), CON-S gp140 ΔCFI. This protein has marked improvement in its immunogenicity compared to monomeric gp120 and wild-type forms of gp140 Envs. Our results demonstrate that the disulfide connectivity in the N-terminal region of CON-S gp140 ΔCFI is different from the disulfide bonding previously reported in the monomeric form of gp120 HIV-1 Env. Additionally, heterogeneity of the disulfide bonding was detected in this region. These data suggest that the V1/V2 region does not have a single, conserved disulfide bonding pattern and that variability could impact immunogenicity of expressed Envs.

A new method for analysis of disulfide-containing proteins by matrix-assisted laser desorption ionization (MALDI) mass spectrometry

A simple and high-throughput method for the identification of disulfide-containing peptides utilizing peptide-matrix adducts is described. Some commonly used matrices in MALDI mass spectrometry were found to specifically react with sulfhydryl groups within peptide, thus allowing the observation of the peptide-matrix adduct ion [M + n + n' matrix + H]+ or [M + n + n' matrix + Na]+ (n = the number of cysteine residues, n' = 1, 2, ... , n) in MALDI mass spectra after chemical reduction of disulfide-linked peptides. Among several matrices tested, alpha-cyano-4-hydroxycinnamic acid (CHCA, molecular mass 189 Da) and alpha-cyano-3-hydroxycinnamic acid (3-HCCA) were found to be more effective for MALDI analysis of disulfide-containing peptides/proteins. Two reduced cysteines involved in a disulfide bridge resulted in a mass shift of 189 Da per cysteine, so the number of disulfide bonds could then be determined, while for the other matrices (sinapinic acid, ferulic acid, and caffeic acid), a similar addition reaction could not occur unless the reaction was carried out under alkaline conditions. The underlying mechanism of the reaction of the matrix addition at sulfhydryl groups is proposed, and several factors that might affect the formation of the peptide-matrix adducts were investigated. In general, this method is fast, effective, and robust to identify disulfide bonds in proteins/peptides.

Identification of the cysteine nitrosylation sites in human endothelial nitric oxide synthase

S-nitrosylation, or the replacement of the hydrogen atom in the thiol group of cysteine residues by a -NO moiety, is a physiologically important posttranslational modification. In our previous work we have shown that S-nitrosylation is involved in the disruption of the endothelial nitric oxide synthase (eNOS) dimer and that this involves the disruption of the zinc (Zn) tetrathiolate cluster due to the S-nitrosylation of Cysteine 98. However, human eNOS contains 28 other cysteine residues whose potential to undergo S-nitrosylation has not been determined. Thus, the goal of this study was to identify the cysteine residues within eNOS that are susceptible to S-nitrosylation in vitro. To accomplish this, we utilized a modified biotin switch assay. Our modification included the tryptic digestion of the S-nitrosylated eNOS protein to allow the isolation of S-nitrosylated peptides for further identification by mass spectrometry. Our data indicate that multiple cysteine residues are capable of undergoing S-nitrosylation in the presence of an excess of a nitrosylating agent. All these cysteine residues identified were found to be located on the surface of the protein according to the available X-ray structure of the oxygenase domain of eNOS. Among those identified were Cys 93 and 98, the residues involved in the formation of the eNOS dimer through a Zn tetrathiolate cluster. In addition, cysteine residues within the reductase domain were identified as undergoing S-nitrosylation. We identified cysteines 660, 801, and 1113 as capable of undergoing S-nitrosylation. These cysteines are located within regions known to bind flavin mononucleotide (FMN), flavin adenine dinucleotide (FAD), and nicotinamide adenine dinucleotide (NADPH) although from our studies their functional significance is unclear. Finally we identified cysteines 852, 975/990, and 1047/1049 as being susceptible to S-nitrosylation. These cysteines are located in regions of eNOS that have not been implicated in any known biochemical functions and the significance of their S-nitrosylation is not clear from this study. Thus, our data indicate that the eNOS protein can be S-nitrosylated at multiple sites other than within the Zn tetrathiolate cluster, suggesting that S-nitrosylation may regulate eNOS function in ways other than simply by inducing dimer collapse.

Applications of mass spectrometry for the structural characterization of recombinant protein pharmaceuticals

Therapeutic proteins produced using recombinant DNA technologies are generally complex, heterogeneous, and subject to a variety of enzymatic or chemical modifications during expression, purification, and long-term storage. The use of mass spectrometry (MS) for the evaluation of recombinant protein sequence and structure provides detailed information regarding amino acid modifications and sequence alterations that have the potential to affect the safety and activity of therapeutic protein products. General MS approaches for the characterization of recombinant therapeutic protein products will be reviewed with particular attention given to the standard MS tools available in most biotechnology laboratories. A number of recent examples will be used to illustrate the utility of MS strategies for evaluation of recombinant protein heterogeneity resulting from post-translational modifications (PTMs), sequence variations generated from proteolysis or transcriptional/translational errors, and degradation products which are formed during processing or final product storage. Specific attention will be given to the MS characterization of monoclonal antibodies as a model system for large, glycosylated, recombinant proteins. Detailed examples highlighting the use of MS for the analysis of monoclonal antibody glycosylation, deamidation, and disulfide mapping will be used to illustrate the application of these techniques to a wide variety of heterogeneous therapeutic protein products. The potential use of MS to support the selection of cell line/clone selection and formulation development for therapeutic antibody products will also be discussed.

Mass spectrometric determination of selenenylsulfide linkages in rat selenoprotein P

The reversible formation of a selenenylsulfide linkage in mammalian thioredoxin reductase was identified as having a key role in its activity. Identification of selenenylsulfide and/or diselenide linkages is therefore critical to the determination of the structure and function of selenoproteins. A selenopeptide, (298)SGSAITUQCAENLPSLCSUQGLFAEEK(324) (U=selenocysteine), was isolated from a tryptic digest of rat selenoprotein P. Its two cysteine residues and two selenocysteine (Sec) residues were determined to be present in oxidized form by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS). The selenopeptide was subjected to partial reduction by dithiothreitol with immediate alkylation by iodoacetamide. This process was monitored by MALDI-TOFMS to determine the number of alkylations that had taken place. The partially reduced and alkylated peptides were then analyzed by nano-electrospray ionization tandem mass spectrometry and the results indicated that selenenylsulfide linkages Sec304-Cys314 and Cys306-Sec316 were present. It is concluded that selenoprotein P contains these two selenenylsulfide bonds.