Real-time detection of nucleic acid interactions by total internal reflection fluorescence

How Surfaces Affect Hybridization Kinetics

Hybridization between nucleic acid strands immobilized on a solid support with partners in solution is widely practiced in bioanalytical technologies and materials science. An important fundamental aspect of understanding these reactions is the role played by immobilization in the dynamics of duplex formation and disassembly. This report reviews and analyzes literature kinetic data to identify commonly observed trends and to correlate them with probable molecular mechanisms. The analysis reveals that while under certain conditions impacts from immobilization are minimal so that surface and solution hybridization kinetics are comparable, it is more typical to observe pronounced offsets between the two scenarios. In the forward (hybridization) direction, rates at the surface commonly decrease by one to two decades relative to solution, while in the reverse direction rates of strand separation at the surface can exceed those in solution by tens of decades. By recasting the deviations in terms of activation barriers, a consensus of how immobilization impacts nucleation, zipping, and strand separation can be conceived within the classical mechanism in which duplex formation is rate limited by preassembly of a nucleus a few base pairs in length, while dehybridization requires the cumulative breakup of base pairs along the length of a duplex. Evidence is considered for how excess interactions encountered on solid supports impact these processes.

Overview of Characterizing Cancer Glycans with Lectin-Based Analytical Methods

Glycosylation is a post-translational modification that is often altered in disease development and progression, including cancer. In cancerous patients, the abnormal expression of glycosylation enzymes leads to aberrant glycosylation, which has been linked to malignant tissues. Due to aberrant glycosylation, the presence of specific glycans can be used as biomarkers for identifying the type and stage of cancer. Glycan structures are heterogeneous, with different protein glycoforms having different functional activities. Lectins are an important tool in glycan analysis due to their specificity in binding to unique glycan linkages and monosaccharide units, which allows for the identification of unique glycan structural properties. In this review, we will discuss the use of lectins in microarrays and chromatography for characterizing glycan structures.

Preparation of a Surface-functionalized Power-free PDMS Microchip for MicroRNA Detection Utilizing Electron Beam-induced Graft Polymerization

We propose an easy microchannel surface functionalization method for a poly(dimethylsiloxane) (PDMS) microchip that utilizes electron beam-induced graft polymerization (EIGP) as a platform for microchip-based biomarker analysis. Unlike other grafting techniques, EIGP enables rapid surface modification of PDMS without initiator immobilization. The grafted microchip is preservable, and can be easily functionalized for versatile applications. In this study, the surface-functionalized power-free microchip (SF-PF microchip) was used for the detection of microRNA (miRNA), which is a biomarker for many serious diseases. The EIGP enables high-density three-dimensional probe DNA immobilization, resulting in rapid and sensitive miRNA detection on the portable SF-PF microchip. The limit of detection was 0.8 pM, the required sample volume was 0.5 μL, and the analysis time was 15 min. The SF-PF microchip will be a versatile platform for microchip-based point-of-care diagnosis.

Role of lectin microarrays in cancer diagnosis

The majority of cell differentiation associated tumor markers reported to date are either glycoproteins or glycolipids. Despite there being a large number of glycoproteins reported as candidate markers for various cancers, only a handful are approved by the US Food and Drug Administration. Lectins, which bind to the glycan part of the glycoproteins, can be exploited to identify aberrant glycosylation patterns, which in turn would help in enhancing the specificity of cancer diagnosis. Although conventional techniques such as HPLC and MS have been instrumental in performing the glycomic analyses, these techniques lack multiplexity. Lectin microarrays have proved to be useful in studying multiple lectin-glycan interactions in a single experiment and, with the advances made in the field, hold a promise of enabling glycomic profiling of cancers in a fast and efficient manner.

A microarray platform for detecting disease-specific circulating miRNA in human serum

Circulating microRNAs (miRNAs) are emerging as potential blood-based biomarkers for cancer and other critical diseases. To profile the expression levels of these tiny molecules, especially in a point-of-care setting, it is imperative to quantify them directly in complex biological fluids. Herein, we report the development of a microarray platform with carboxyl-polyethylene glycol (PEG) as a functional layer and aminated hairpin nucleic acid molecules as target-specific capture probes (CPs). Due to the anti-fouling effect conferred by the carboxyl-PEG layer, we could directly detect as little as 10fM of miRNA targets in 20µl of unprocessed human serum. In contrast to the conventional miRNA microarrays, our platform does not require RNA extraction, labeling and target amplification, thus significantly reducing both the sample preparation steps as well as the total assay duration. The use of specially designed hairpin CPs entails reliable discrimination of miRNA sequences with high sequence homology. A nanoparticle-based detection technique, with the help of differential interference contrast (DIC) microscopy, offers excellent resolution down to a single molecule. With the capability of detecting disease-specific miRNA targets directly in human serum, our microarray platform has potential applications in rapid, minimally invasive clinical diagnostic assays.

Oligonucleotide microarray chip for the quantification of MS2, ΦX174, and adenoviruses on the multiplex analysis platform MCR 3

Pathogenic viruses are emerging contaminants in water which should be analyzed for water safety to preserve public health. A strategy was developed to quantify RNA and DNA viruses in parallel on chemiluminescence flow-through oligonucleotide microarrays. In order to show the proof of principle, bacteriophage MS2, ΦX174, and the human pathogenic adenovirus type 2 (hAdV2) were analyzed in spiked tap water samples on the analysis platform MCR 3. The chemiluminescence microarray imaging unit was equipped with a Peltier heater for a controlled heating of the flow cell. The efficiency and selectivity of DNA hybridization could be increased resulting in higher signal intensities and lower cross-reactivities of polymerase chain reaction (PCR) products from other viruses. The total analysis time for DNA/RNA extraction, cDNA synthesis for RNA viruses, polymerase chain reaction, single-strand separation, and oligonucleotide microarray analysis was performed in 4-4.5 h. The parallel quantification was possible in a concentration range of 9.6 × 10(5)-1.4 × 10(10) genomic units (GU)/mL for bacteriophage MS2, 1.4 × 10(5)-3.7 × 10(8) GU/mL for bacteriophage ΦX174, and 6.5 × 10(3)-1.2 × 10(5) for hAdV2, respectively, by using a measuring temperature of 40 °C. Detection limits could be calculated to 6.6 × 10(5) GU/mL for MS2, 5.3 × 10(3) GU/mL for ΦX174, and 1.5 × 10(2) GU/mL for hAdV2, respectively. Real samples of surface water and treated wastewater were tested. Generally, found concentrations of hAdV2, bacteriophage MS2, and ΦX174 were at the detection limit. Nevertheless, bacteriophages could be identified with similar results by means of quantitative PCR and oligonucleotide microarray analysis on the MCR 3.

Numerical modeling of DNA-chip hybridization with chaotic advection

We present numerical simulations of DNA-chip hybridization, both in the "static" and "dynamical" cases. In the static case, transport of free targets is limited by molecular diffusion; in the dynamical case, an efficient mixing is achieved by chaotic advection, with a periodic protocol using pumps in a rectangular chamber. This protocol has been shown to achieve rapid and homogeneous mixing. We suppose in our model that all free targets are identical; the chip has different spots on which the probes are fixed, also all identical, and complementary to the targets. The reaction model is an infinite sink potential of width dh , i.e., a target is captured as soon as it comes close enough to a probe, at a distance lower than dh . Our results prove that mixing with chaotic advection enables much more rapid hybridization than the static case. We show and explain why the potential width dh does not play an important role in the final results, and we discuss the role of molecular diffusion. We also recover realistic reaction rates in the static case.

Highly rapid amplification-free and quantitative DNA imaging assay

There is an urgent need for rapid and highly sensitive detection of pathogen-derived DNA in a point-of-care (POC) device for diagnostics in hospitals and clinics. This device needs to work in a 'sample-in-result-out' mode with minimum number of steps so that it can be completely integrated into a cheap and simple instrument. We have developed a method that directly detects unamplified DNA, and demonstrate its sensitivity on realistically sized 5 kbp target DNA fragments of Micrococcus luteus in small sample volumes of 20 μL. The assay consists of capturing and accumulating of target DNA on magnetic beads with specific capture oligonucleotides, hybridization of complementary fluorescently labeled detection oligonucleotides, and fluorescence imaging on a miniaturized wide-field fluorescence microscope. Our simple method delivers results in less than 20 minutes with a limit of detection (LOD) of ~5 pM and a linear detection range spanning three orders of magnitude.

Universal nucleic acid sequence-based amplification for simultaneous amplification of messengerRNAs and microRNAs

A universal NASBA assay is presented for simultaneous amplification of multiple microRNA (miRNA) and messengerRNA (mRNA) sequences. First, miRNA and mRNA sequences are reverse transcribed using tailed reverse transcription primer pairs containing a gene-specific and an non-specific region. For reverse transcription of small miRNA molecules a non-specific region is incorporated into a structured stem-loop reverse transcription primer. Second, a universal NASBA primer pair that recognizes the tagged cDNA molecules enables a simultaneous, transcription-based amplification reaction (NASBA) of all different cDNA molecules in one reaction. The NASBA products (RNA copies) are detected by gene-specific DNA probes immobilized on a biochip. By using the multiplex reverse transcription combined with the universal NASBA amplification up to 14 different mRNA and miRNA sequences can be specifically amplified and detected in parallel. In comparison with standard multiplex NASBA assays this approach strongly enhances the multiplex capacity of NASBA-based amplification reactions. Furthermore simultaneous assaying of different RNA classes can be achieved that might be beneficial for studying miRNA-based regulation of gene expression or for RNA-based tumor diagnostics.

Total internal reflection photoacoustic spectroscopy for the detection of β-hematin

Evanescent field sensing methods are currently used to detect many different types of disease markers and biologically important chemicals such as the HER2 breast cancer receptor. Hinoue et al. used Total Internal Reflection Photoacoustic Spectroscopy (TIRPAS) as a method of using the evanescent field to detect an optically opaque dye at a sample interface. Although their methods were successful at detecting dyes, the results at that time did not show a very practical spectroscopic technique, which was due to the less than typical sensitivity of TIRPAS as a spectroscopy modality given the low power (≈ 1 to 2 W) lasers being used. Contrarily, we have used an Nd:YAG laser with a five nanosecond pulse that gives peak power of 1 MW coupled with the TIRPAS system to increase the sensitivity of this technique for biological material sensing. All efforts were focused on the eventual detection of the optically absorbing material, hemozoin, which is created as a byproduct of a malarial infection in blood. We used an optically analogous material, β-hematin, to determine the potential for detection in the TIRPAS system. In addition, four properties which control the sensitivity were investigated to increase understanding about the sensor's function as a biosensing method.

Kinetic mechanisms in morpholino-DNA surface hybridization

Morpholinos (MOs) are DNA analogues whose uncharged nature can bring fundamental advantages to surface hybridization technologies such as DNA microarrays, by using MOs as the immobilized, or "probe", species. Advancement of MO-based diagnostics, however, is challenged by limited understanding of the surface organization of MO molecules and of how this organization impacts hybridization kinetics and thermodynamics. The present study focuses on hybridization kinetics between monolayers of MO probes and DNA targets as a function of the instantaneous extent of hybridization (i.e., duplex coverage), total probe coverage, and ionic strength. Intriguingly, these experiments reveal distinct kinetic stages, none of which are consistent with Langmuir kinetics. The initial stage, in which duplex coverage remains relatively sparse, indicates confluence of two effects: blockage of target access to unhybridized probes by previously formed duplexes and deactivation of the solid support due to consumption of probe molecules. This interpretation is consistent with a surface organization in which unhybridized MO probes localize near the solid support, underneath a layer of MO-DNA duplexes. As duplex coverage builds, provided saturation is not reached first, the initial stage can transition to an unusual regime characterized by near independence of hybridization rate on duplex coverage, followed by a prolonged approach to equilibrium. The possible origins of these more complex latter behaviors are discussed. Comparison with published data for DNA and peptide nucleic acid (PNA) probes is carried out to look for universal trends in kinetics. This comparison reveals qualitative similarities when comparable surface organization of probes is expected. In addition, MO monolayers are found capable of a broad range of reactivities that span reported values for PNA and DNA probes.

Simple one-step process for immobilization of biomolecules on polymer substrates based on surface-attached polymer networks

For the miniaturization of biological assays, especially for the fabrication of microarrays, immobilization of biomolecules at the surfaces of the chips is the decisive factor. Accordingly, a variety of binding techniques have been developed over the years to immobilize DNA or proteins onto such substrates. Most of them require rather complex fabrication processes and sophisticated surface chemistry. Here, a comparatively simple immobilization technique is presented, which is based on the local generation of small spots of surface attached polymer networks. Immobilization is achieved in a one-step procedure: probe molecules are mixed with a photoactive copolymer in aqueous buffer, spotted onto a solid support, and cross-linked as well as bound to the substrate during brief flood exposure to UV light. The described procedure permits spatially confined surface functionalization and allows reliable binding of biological species to conventional substrates such as glass microscope slides as well as various types of plastic substrates with comparable performance. The latter also permits immobilization on structured, thermoformed substrates resulting in an all-plastic biochip platform, which is simple and cheap and seems to be promising for a variety of microdiagnostic applications.

Study of non-covalent interactions of luotonin A derivatives and the DNA minor groove as a first step in the study of their analytical potential as DNA probes

The interaction between DNA and several newly synthesized derivatives of the natural anticancer compound luotonin A has been studied. The results from our work reveal an effective and selective alkaloid/double-stranded DNA (ds-DNA) interaction. In the presence of increasing amounts of ds-DNA, a noticeable fluorescence quenching of the luotonin A derivatives under study was observed. However, this effect did not take place when single-stranded DNA (ss-DNA) was employed. The association constant alkaloids/ds-DNA was calculated by quantitation of such a quenching effect. The influence of other quenchers, namely Co(2+) and Br(-) on the native fluorescence of luotonin A and derivatives was also studied, and a remarkable quenching effect was observed for both ions. We have also investigated how by binding DNA the alkaloids could get protected from the external Co(2+) and Br(-) quenchers. The Stern-Volmer constants (K (SV)) for Co(2+) and Br(-) quenching effect on the studied alkaloids were considerably reduced (10-50%) after incubation of the compounds in the presence of DNA with regard to the K (SV) values in absence of DNA. An increase in the fluorescence anisotropy values of luotonins was also produced only in the presence of ds-DNA but not in the case of ss-DNA. To better characterize the nature of that interaction, viscosimetry assays and ethidium bromide displacement studies were conducted. With regard to DNA reference solutions, the viscosity of solutions containing DNA and luotonin A derivatives was reduced or not significantly increased. It was also observed that the studied compounds were unable to displace the intercalating agent ethidium bromide. All of these results, together with the obtained association constants values (K (ass) = 2.2 × 10(2) - 1.3 × 10(3)), support that neither covalent nor intercalating interactions luotonin A derivatives/ds-DNA are produced, leading to the conclusion that these alkaloids bind ds-DNA through the minor groove. The specific changes in the fluorescence behavior of luotonin A and derivatives distinguishing between ss-DNA and ds-DNA binding, lead us to propose these compounds as attractive turn-off probes to detect DNA hybridization.

Sequence-specific detection of short-length DNA via template-dependent surface-hybridization events

Short-length DNA and RNA, such as mature small RNA, which contains only 17-25 nucleotides, are always a problem in hybridization-based detection assays. In this paper, we report a proof-of-concept for a new short-length DNA detection technology which encompasses a design strategy whereby capture and reporter probes that do not hybridize to each other at 20 degrees C can be made to anneal to each other in the presence of a template via the formation of a stable three-component complex. The thermodynamics of this magnetic bead-based DNA biosensor was then investigated in detail by monitoring chemiluminescence (CL) changes in the absence and presence of targets over a temperature profile. The data show that this new biosensor offers the possibility of highly selective and sensitive detection of the short-length target DNA. In view of these advantages, this template-dependent surface-hybridization assay, as a new CL strategy, might create a universal technology for developing simple biosensors in sensitive and selective detection of short-length DNA and RNA.

Single-molecule kinetics and super-resolution microscopy by fluorescence imaging of transient binding on DNA origami

DNA origami is a powerful method for the programmable assembly of nanoscale molecular structures. For applications of these structures as functional biomaterials, the study of reaction kinetics and dynamic processes in real time and with high spatial resolution becomes increasingly important. We present a single-molecule assay for the study of binding and unbinding kinetics on DNA origami. We find that the kinetics of hybridization to single-stranded extensions on DNA origami is similar to isolated substrate-immobilized DNA with a slight position dependence on the origami. On the basis of the knowledge of the kinetics, we exploit reversible specific binding of labeled oligonucleotides to DNA nanostructures for PAINT (points accumulation for imaging in nanoscale topography) imaging with <30 nm resolution. The method is demonstrated for flat monomeric DNA structures as well as multimeric, ribbon-like DNA structures.

Microarray-based amplification and detection of RNA by nucleic acid sequence based amplification

Nucleic acid sequence based amplification (NASBA) is a versatile in vitro nucleic acid amplification method. In this work, RNA amplification and labeling by NASBA and microarray analysis are combined in a one-step process. The NASBA reaction is performed in direct contact with capture probes. These probes are bound to surface-attached hydrogel spots generated at the chip surfaces by using a simple printing and UV irradiation process. Five gene expression and SNP parameters with known relevance in breast cancer diagnostics were chosen to demonstrate that multiplex NASBA-on-microarray analysis is possible. A minimum amount of 10 pg of total RNA was shown to be sufficient for the detection of the reference parameter RPS18, which demonstrates that the detection limit of the microarray-based NASBA assays theoretically allows single-cell assays to be performed.

Biosensors based on surface plasmon-enhanced fluorescence spectroscopy

The implementation of surface plasmon-enhanced fluorescence spectroscopy (SPFS) to surface plasmon resonance (SPR) biosensors enables increasing their sensitivity by several orders of magnitude. In SPR-based biosensors, surface plasmons probe the binding of target molecules contained in a liquid sample by their affinity partners attached to a metallic sensor surface. SPR biosensors relying on the detection of refractive index changes allow for direct observation of the binding of large and medium size molecules that produces sufficiently large refractive index changes. In SPR biosensors exploiting SPFS, the capture of fluorophore-labeled molecules to the sensor surface is observed by the detection of fluorescence light emitted from the surface. This technique takes advantage of the enhanced intensity of electromagnetic field accompanied with the resonant excitation of surface plasmons. The interaction with surface plasmons can greatly increase the measured fluorescence signal through enhancing the excitation rate of fluorophores and by more efficient collecting of fluorescence light. SPFS-based biosensors were shown to enable the analysis of samples with extremely low analyte concentrations and the detection of small molecules. In this review, we describe the fundamental principles, implementations, and current state of the art applications of SPFS biosensors. This review focuses on SPFS-based biosensors employing the excitation of surface plasmons on continuous metal-dielectric interfaces.

Carbohydrate recognition by boronolectins, small molecules, and lectins

Carbohydrates are known to mediate a large number of biological and pathological events. Small and macromolecules capable of carbohydrate recognition have great potentials as research tools, diagnostics, vectors for targeted delivery of therapeutic and imaging agents, and therapeutic agents. However, this potential is far from being realized. One key issue is the difficulty in the development of "binders" capable of specific recognition of carbohydrates of biological relevance. This review discusses systematically the general approaches that are available in developing carbohydrate sensors and "binders/receptors," and their applications. The focus is on discoveries during the last 5 years.

A polymer-based DNA biochip platform for human papilloma virus genotyping

Genotyping of the human papilloma virus (HPV) is from a clinical point of view an important diagnostic task as some genotypes play a major role in the development of cervical carcinoma. So far PCR combined with blotting or in situ labelling is known to be the most accurate and sensitive method for detection and genotyping of HPV infection in clinical samples. However, specificity, cost-efficiency and sensitivity are not always satisfactory. A novel DNA biochip is described based on a plastic substrate, onto which small polymer droplets and single-stranded DNA are printed in the form of microarrays. Immobilisation of all compounds on the chip surface is achieved by a short UV-irradiation process, inducing photochemical reactions in the polymer. The chip designed for this study contains 36 probes for determining 12 common, different HPV genotypes. After isolation of the DNA, PCR and biochip read-out, the chip allows for genotyping of the most common virus strains, which, according to current prevalence studies, cover 85-95% of all infections. Following this approach as little as 10 virus copies can be detected within a short exposure time. Even using paraffin-embedded material and 10(4) copies per PCR are sufficient to allow rapid and reliable HPV genotyping.

Tracking transcription factor complexes on DNA using total internal reflectance fluorescence protein binding microarrays

We have developed a high-throughput protein binding microarray (PBM) assay to systematically investigate transcription regulatory protein complexes binding to DNA with varied specificity and affinity. Our approach is based on the novel coupling of total internal reflectance fluorescence (TIRF) spectroscopy, swellable hydrogel double-stranded DNA microarrays and dye-labeled regulatory proteins, making it possible to determine both equilibrium binding specificities and kinetic rates for multiple protein:DNA interactions in a single experiment. DNA specificities and affinities for the general transcription factors TBP, TFIIA and IIB determined by TIRF–PBM are similar to those determined by traditional methods, while simultaneous measurement of the factors in binary and ternary protein complexes reveals preferred binding combinations. TIRF–PBM provides a novel and extendible platform for multi-protein transcription factor investigation.

Nucleic Acid-based Detection of Bacterial Pathogens Using Integrated Microfluidic Platform Systems

The advent of nucleic acid-based pathogen detection methods offers increased sensitivity and specificity over traditional microbiological techniques, driving the development of portable, integrated biosensors. The miniaturization and automation of integrated detection systems presents a significant advantage for rapid, portable field-based testing. In this review, we highlight current developments and directions in nucleic acid-based micro total analysis systems for the detection of bacterial pathogens. Recent progress in the miniaturization of microfluidic processing steps for cell capture, DNA extraction and purification, polymerase chain reaction, and product detection are detailed. Discussions include strategies and challenges for implementation of an integrated portable platform.

Performance of a polymer-based DNA chip platform in detection and genotyping of human papillomavirus in clinical samples

Human papillomavirus (HPV) plays a key role in the development of cervical and laryngeal cancers. The aim of our study was to compare the performance of a new hydrogel-based HPV genotyping biochip assay (Biochip) to a commercially available and CE-marked conventional PCR followed by reverse hybridization (GenID-PCR). One hundred twenty-three samples were available for the study. Of these samples, 101/123 were gynecological swabs, 8/123 were swabs or biopsy samples of genital warts, 7/123 were biopsy samples of otorhinolaryngeal lesions, 5/123 were samples of skin warts, and 2/123 were samples of orolabial abnormalities. These molecular methods for HPV genotyping showed comparable sensitivity and specificity. However, 19/123 of the results were discrepant. Specifically, Biochip showed better performance in the detection of multiple infections, especially when more than one high-risk genotype was present. Due to the different probe configurations used in the two assays, GenID-PCR achieves only group-specific detection of many HPV genotypes, whereas Biochip allows for specific identification. Overall, the newly developed HPV chip system (Biochip) proved to be a suitable tool for HPV detection and genotyping; it also proved to be superior for establishing HPV genotyping methods.

Versatile microfluidic total internal reflection (TIR)-based devices: application to microbeads velocity measurement and single molecule detection with upright and inverted microscope

A poly(dimethylsiloxane) (PDMS) chip for Total Internal Reflection (TIR)-based imaging and detection has been developed using Si bulk micromachining and PDMS casting. In this paper, we report the applications of the chip on both inverted and upright fluorescent microscopes and confirm that two types of sample delivery platforms, PDMS microchannel and glass microchannel, can be easily integrated depending on the magnification of an objective lens needed to visualize a sample. Although any device configuration can be achievable, here we performed two experiments to demonstrate the versatility of the microfluidic TIR-based devices. The first experiment was velocity measurement of Nile red microbeads with nominal diameter of 500 nm in a pressure-driven flow. The time-sequenced fluorescent images of microbeads, illuminated by an evanescent field, were cross-correlated by a Particle Image Velocimetry (PIV) program to obtain near-wall velocity field of the microbeads at various flow rates from 500 nl/min to 3000 nl/min. We then evaluated the capabilities of the device for Single Molecule Detection (SMD) of fluorescently labeled DNA molecules from 30 bp to 48.5 kbp and confirm that DNA molecules as short as 1105 bp were detectable. Our versatile, integrated device could provide low-cost and fast accessibility to Total Internal Reflection Fluorescent Microscopy (TIRFM) on both conventional upright and inverted microscopes. It could also be a useful component in a Micro-Total Analysis System (micro-TAS) to analyze nanoparticles or biomolecules near-wall transport or motion.

Quantitative Assay of Deletion or Duplication Genotype by Capillary Electrophoresis System: Application in Prader–Willi Syndrome and Duchenne Muscular Dystrophy

Background: Deletions and duplications involving large DNA segments result in underexpression or overexpression, depending on the changes in allele dose, and are known to cause many common disorders. Detection of allele dose variations in the human genome is increasingly important in medical genetic diagnosis.

Methods: We used multiplex quantitative PCR coupled with capillary electrophoresis for accurate allele dose determination. In cases of Prader–Willi syndrome (PWS), a total of 24 patients with PWS, as well as 205 control individuals from the general population, were analyzed by use of multiplex quantitative PCR to amplify the FGFR2 gene, the KRIT1 gene, and the SNRPN gene simultaneously. In cases of Duchenne muscular dystrophy (DMD), we optimized the multiplex quantitative PCR to amplify 38 exons to analyze the DMD gene for rapid diagnosis of 12 DMD-affected males, 12 obligate carriers from families, and 50 unaffected female controls.

Results: We were able to unambiguously diagnose the deletion genotype in PWS patients and identify all deletion or duplication genotypes and carrier status in DMD-affected cases with 100% sensitivity and specificity.

Conclusions: This report describes a novel single assay that can rapidly quantify allele dose to provide accurate clinical genetic diagnosis. This technique offers a valuable alternative for the rapid detection of genomic deletions or duplications and decreases costs because it does not require expensive fluorescent reagents.

Optical study of DNA surface hybridization reveals DNA surface density as a key parameter for microarray hybridization kinetics

We investigate the kinetics of DNA hybridization reactions on glass substrates, where one 22 mer strand (bound-DNA) is immobilized via phenylene-diisothiocyanate linker molecule on the substrate, the dye-labeled (Cy3) complementary strand (free-DNA) is in solution in a reaction chamber. We use total internal reflection fluorescence for surface detection of hybridization. As a new feature we perform a simultaneous real-time measurement of the change of free-DNA concentration in bulk parallel to the total internal reflection fluorescence measurement. We observe that the free-DNA concentration decreases considerably during hybridization. We show how the standard Langmuir kinetics needs to be extended to take into account the change in bulk concentration and explain our experimental results. Connecting both measurements we can estimate the surface density of accessible, immobilized bound-DNA. We discuss the implications with respect to DNA microarray detection.

A DNA microarray platform based on direct detection of rRNA for characterization of freshwater sediment-related prokaryotic communities

A DNA microarray platform for the characterization of bacterial communities in freshwater sediments based on a heterogeneous set of 70 16S rRNA-targeted oligonucleotide probes and directly labeled environmental RNA was developed and evaluated. Application of a simple protocol for the efficient background blocking of aminosilane-coated slides resulted in an improved signal-to-noise ratio and a detection limit of 10 ng for particular 16S rRNA targets. An initial specificity test of the system using RNA from pure cultures of different phylogenetic lineages showed a fraction of false-positive signals of approximately 5% after protocol optimization and a marginal loss of correct positive signals. Subsequent microarray analysis of sediment-related community RNA from four different German river sites suggested low diversity for the groups targeted but indicated distinct differences in community composition. The results were supported by parallel fluorescence in situ hybridization in combination with sensitive catalyzed reporter deposition (CARD-FISH). In comparisons of the data of different sampling sites, specific detection of populations with relative cellular abundances down to 2% as well as a correlation of microarray signal intensities and population size is suggested. Our results demonstrate that DNA microarray technology allows for the fast and efficient precharacterization of complex bacterial communities by the use of standard single-cell hybridization probes and the direct detection of environmental rRNA, also in methodological challenging habitats such as heterogeneous lotic freshwater sediments.

Single-nucleotide polymorphism genotyping by nanoparticle-enhanced surface plasmon resonance imaging measurements of surface ligation reactions

A sensitive method for the analysis of single nucleotide polymorphisms (SNPs) in genomic DNA that utilizes nanoparticle-enhanced surface plasmon resonance imaging (SPRI) measurements of surface enzymatic ligation reactions on DNA microarrays is demonstrated. SNP identification was achieved by using sequence-specific surface reactions of the enzyme Taq DNA ligase, and the presence of ligation products on the DNA microarray elements was detected using SPRI through the hybridization adsorption of complementary oligonucleotides attached to gold nanoparticles. The use of gold nanoparticles increases the sensitivity of the SPRI so that single bases in oligonucleotides can be successfully identified at a concentration of 1 pM. This sensitivity is amply sufficient for performing multiplexed SNP genotyping by using multiple PCR amplicons and should also allow for the direct detection and identification of SNP sequences from 1 pM unamplified genomic DNA samples with this array-based and label-free SPRI methodology. As a first example of SNP genotyping, three different human genomic DNA samples were screened for a possible point mutation in the BRCA1 gene that is associated with breast cancer.

Electrochemistry of immobilized redox enzymes: kinetic characteristics of NADH oxidation catalysis at diaphorase monolayers affinity immobilized on electrodes

In the class of NADH:acceptor oxidoreductases, the diaphorase from Bacillus stearothermophilusis a particularly promising enzyme for sensing NADH, and indirectly a great number of analytes, when coupled with a NAD-dependent dehydrogenase as well as for the design of mono- and multienzyme affinity sensors. The design and rational optimization of such systems require devising immobilization procedures that prevent dramatic losses of the enzymatic activity and a full kinetic characterization of the immobilized enzyme system. Two immobilization procedures are described, which involve recognition of the biotinylated diaphorase by a monolayer of neutravidin adsorbed on the electrode surface either directly or through the intermediacy of a monolayer of biotinylated rabbit immunoglobulin. Thorough kinetic characterization of the two systems is derived from cyclic voltammetric responses. A precise estimate of the enzyme coverages is obtained after comparing the enzyme kinetics of the immobilized and the homogeneous system.

Optical technologies for the read out and quality control of DNA and protein microarrays

Microarray formats have become an important tool for parallel (or multiplexed) monitoring of biomolecular interactions. Surface-immobilized probes like oligonucleotides, cDNA, proteins, or antibodies can be used for the screening of their complementary targets, covering different applications like gene or protein expression profiling, analysis of point mutations, or immunodiagnostics. Numerous reviews have appeared on this topic in recent years, documenting the intriguing progress of these miniaturized assay formats. Most of them highlight all aspects of microarray preparation, surface chemistry, and patterning, and try to give a systematic survey of the different kinds of applications of this new technique. This review places the emphasis on optical technologies for microarray analysis. As the fluorescent read out of microarrays is dominating the field, this topic will be the focus of the review. Basic principles of labeling and signal amplification techniques will be introduced. Recent developments in total internal reflection fluorescence, resonance energy transfer assays, and time-resolved imaging are addressed, as well as non-fluorescent imaging methods. Finally, some label-free detection modes are discussed, such as surface plasmon microscopy or ellipsometry, since these are particularly interesting for microarray development and quality control purposes.

Development of a Lectin Microarray Based on an Evanescent‐Field Fluorescence Principle

To investigate protein-carbohydrate interactions in a comprehensive and high-throughput manner, carbohydrate biosensors including microarrays have recently attracted increased attention. In this context, carbohydrate and lectin microarrays are emerging as techniques to meet such requisites. However, most of these methods adopt a conventional immuno-detection system, which requires repetitive washing steps before detection. Since lectin-carbohydrate interactions are relatively weak compared with those between antigens and antibodies, a more precise analytical method, which does not require any washing step, is desirable. We describe here a novel platform for lectin microarray that enables direct observation of lectin-carbohydrate interactions under equilibrium conditions, on the basis of an evanescent-field fluorescence-assisted detection principle. This method allows the analysis of a panel of glycoproteins (glycopeptides) in an extremely sensitive manner. The system also allows real-time observation of lectin-glycoprotein interactions in an aqueous phase. No washing procedures are required, thus relatively weak interactions are detectable. The described lectin microarray is expected to be useful for various fields of glycomics requiring high-throughput analysis of not only purified glycoproteins but also of crude samples.

Evanescent-field fluorescence-assisted lectin microarray: a new strategy for glycan profiling

Glycans have important roles in living organisms with their structural diversity. Thus, glycomics, especially aspects involving the assignment of functional glycans in a high-throughput manner, has been an emerging field in the postproteomics era. To date, however, there has been no versatile method for glycan profiling. Here we describe a new microarray procedure based on an evanescent-field fluorescence-detection principle, which allows sensitive, real-time observation of multiple lectin-carbohydrate interactions under equilibrium conditions. The method allows quantitative detection of even weak lectin-carbohydrate interactions (dissociation constant, K(d) > 10(-6) M) as fluorescent signals for 39 immobilized lectins. We derived fully specific signal patterns for various Cy3-labeled glycoproteins, glycopeptides and tetramethylrhodamine (TMR)-labeled oligosaccharides. The obtained results were consistent with the previous reports of glycoprotein and lectin specificities. We investigated the latter aspects in detail by frontal affinity chromatography, another profiling method. Thus, the developed lectin microarray should contribute to creation of a new paradigm for glycomics.

Metal-enhanced fluorescence immunoassays using total internal reflection and silver island-coated surfaces

We present a generic immunoassay platform that uses enhanced total internal reflection fluorescence in the proximity of silver island films (SIFs), a surface coating consisting of metal (silver) particles. This platform is used with a model immunoassay where a protein antigen, rabbit immunoglobulin G, was immobilized on the SIF-coated glass surface. The signal from a fluorescent dye-labeled anti-rabbit antibody binding to the surface antigen was detected; different color dyes have been tested. Close placement of the fluorophore to surface-bound silver nanostructures results in dramatic signal enhancement (up to 40-fold) on the SIFs as compared with the glass slides. Use of the total internal reflection mode of excitation has significant advantages (over classic front-face excitation) for practical assay development. The limited evanescent wave excitation volume makes it possible to minimize the background signal and use the immunoassay with no need for any washing steps.

Surface density dependence of PCR amplicon hybridization on PNA/DNA probe layers

Surface plasmon field-enhanced fluorescence spectroscopy was employed to extensively investigate the hybridization behaviors of polymerase chain reaction (PCR) amplicons on a peptide nucleic acid (PNA) or DNA probe layer that was previously attached on a streptavidin-modified gold surface via biotin/streptavidin interaction. Despite the neutral backbone of PNA, the hybridization reactions were strongly influenced by the variation of ionic strength. The association rates exhibited a monotonic decrease with ionic strength increase and the maximum hybridization signal was achieved at an intermediate sodium concentration (approximately 100 mM). These effects were mainly ascribed to the electrostatic cross talk among the hybridized DNA molecules and the secondary structure of PCR amplicons. For the negatively charged DNA probes, the hybridization reaction was subjected additionally to the DNA/DNA electrostatic barrier, particularly in lower ionic strength range (e.g., 10 approximately 150 mM Na(+)). The electrostatic cross talk was shown to be largely reduced if the PNA probe layer was sufficiently diluted by following a strategic templated immobilization method. As a consequence, a pseudo-first-order kinetic model was applicable to describe the hybridization kinetics, and affinity constants were derived for evaluating the influence of single nucleotide polymorphisms (SNPs).