Device for the Reversed-Phase Separation and On-Target Deposition of Peptides Incorporating a Hydrophobic Sample Barrier for Matrix-Assisted Laser Desorption/Ionization Mass Spectrometry

New Insights into the Phototoxicity of Anthracene-Based Chromophores: The Chloride Salt Effect†

Unraveling the causes underlying polycyclic aromatic hydrocarbon phototoxicity is an essential step in understanding the harmful effects of these compounds in nature. Toward this end, we have studied the DNA interactions and photochemistry of N1-(anthracen-9-ylmethyl)ethane-1,2-diaminium dichloride in the presence and absence of NaF, KF, NaCl, KCl, NaBr, KBr, NaI, and KI (350 nm hν, pH 7.0). Exposing pUC19 plasmid to UV light in solutions containing 400 mM KCl formed significantly more direct strand breaks in DNA compared to no-salt control reactions. In contrast, NaCl increased DNA damage moderately, while the sodium(I) and potassium(I) fluoride, bromide, and iodide salts generally inhibited cleavage (I- > Br- > F-). A halide anion-induced heavy-atom effect was indicated by monitoring anthracene photodegradation and by employing the hydroxyl radical (•OH) probe hydroxyphenyl fluorescein (HPF). These studies revealed that among no-salt controls and the eight halide salts, only NaCl and KCl enabled the anthracene to photosensitize the production of high levels of DNA-damaging reactive oxygen species (ROS). Pre-irradiation of N1-(anthracen-9-ylmethyl)ethane-1,2-diaminium dichloride at 350 nm increased the amounts of chloride salt-induced •OH detected by HPF in subsequent anthracene photoactivation experiments. Taking into consideration that •OH and other highly reactive ROS are extremely short-lived, this result suggests that the pre-irradiation step might lead to the formation of oxidized anthracene photoproducts that are exceedingly redox-active. The fluorometric probes HPF and Singlet Oxygen Sensor Green revealed that KCl concentrations ranging from 150 to 400 mM and from 100 to 400 mM, respectively, enhanced N1-(anthracen-9-ylmethyl)ethane-1,2-diaminium dichloride photosensitized •OH and singlet oxygen (1O2) production over no-salt controls. Considering the relatively high levels of Na+, K+, and Cl- ions that exist in the environment and in living organisms, our findings may be relevant to the phototoxic effects exhibited by anthracenes and other polycyclic hydrocarbons in vivo.

Selective hydrolysis of oxidized insulin chain B by a Zr(IV)-substituted Wells-Dawson polyoxometalate

We report for the first time on the selective hydrolysis of a polypeptide system by a metal-substituted polyoxometalate (POM). Oxidized insulin chain B, a 30 amino acid polypeptide, was selectively cleaved by the Zr(IV)-substituted Wells-Dawson POM, K15H[Zr(α2-P2W17O61)2]·25H2O, under physiological pH and temperature conditions in aqueous solution. HPLC-ESI-MS, LC-MS/MS, MALDI-TOF and MALDI-TOF MS/MS data indicate hydrolysis at the Phe1-Val2, Gln4-His5, Leu6-Cys(SO3H)7, and Gly8-Ser9 peptide bonds. The rate of oxidized insulin chain B hydrolysis (0.45 h(-1) at pH 7.0 and 60 °C) was calculated by fitting the integration values of its HPLC-UV signal to a first-order exponential decay function. (1)H NMR measurements show significant line broadening and shifting of the polypeptide resonances upon addition of the Zr(IV)-POM, indicating that interaction between the Zr(IV)-POM and the polypeptide takes place in solution. Circular dichroism (CD) measurements clearly prove that the flexible unfolded nature of the polypeptide was retained in the presence of the Zr(IV)-POM. The thermal stability of the Zr(IV)-POM in the presence of the polypeptide chain during the hydrolytic reaction was confirmed by (31)P NMR spectroscopy. Despite the highly negative charge of the Zr(IV)-POM, the mechanism of interaction appears to be dominated by a strong metal-directed binding between the positively charged Zr(IV) center and negatively charged amino acid side chains.

A sample preparation method for recovering suppressed analyte ions in MALDI TOF MS

In matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI TOF MS), analyte signals can be substantially suppressed by other compounds in the sample. In this technical note, we describe a modified thin-layer sample preparation method that significantly reduces the analyte suppression effect (ASE). In our method, analytes are deposited on top of the surface of matrix preloaded on the MALDI plate. To prevent embedding of analyte into the matrix crystals, the sample solution were prepared without matrix and efforts were taken not to re-dissolve the preloaded matrix. The results with model mixtures of peptides, synthetic polymers and lipids show that detection of analyte ions, which were completely suppressed using the conventional dried-droplet method, could be effectively recovered by using our method. Our findings suggest that the incorporation of analytes in the matrix crystals has an important contributory effect on ASE. By reducing ASE, our method should be useful for the direct MALDI MS analysis of multicomponent mixtures.

Lab-on-a-plate: extending the functionality of MALDI-MS and LDI-MS targets

We review the literature that describes how (matrix-assisted) laser desorption/ionization (MA)LDI target plates can be used not only as sample supports, but beyond that: as functional parts of analytical protocols that incorporate detection by MALDI-MS or matrix-free LDI-MS. Numerous steps of analytical procedures can be performed directly on the (MA)LDI target plates prior to the ionization of analytes in the ion source of a mass spectrometer. These include homogenization, preconcentration, amplification, purification, extraction, digestion, derivatization, synthesis, separation, detection with complementary techniques, data storage, or other steps. Therefore, we consider it helpful to define the "lab-on-a-plate" as a format for carrying out extensive sample treatment as well as bioassays directly on (MA)LDI target plates. This review introduces the lab-on-plate approach and illustrates it with the aid of relevant examples from the scientific and patent literature.

Targeted identification of phosphorylated peptides by off-line HPLC-MALDI-MS/MS using LC retention time prediction

Protein phosphorylation is a type of posttranslational modification which plays an important role in cell regulation and signal transduction. Because of its biological relevance, a considerable amount of interest has been paid to the development of efficient techniques for phosphopeptide analysis. Although advances in MS control have enabled the high-throughput discovery of proteins from limited amounts of sample, automated selection of MS/MS precursor ions based on intensity alone can significantly hamper the detection of low-abundance phosphopeptides. On the basis of the observation that the introduction of a phosphate moiety does not dramatically change peptide retention time in reverse-phase chromatography, phosphopeptide specific MS/MS fragmentation attempts based on LC retention time and m/z were evaluated using a standard protein mixture, then using in vitro phosphorylated myelin basic protein. Results indicated that the majority (98%) of phosphopeptides identified eluted within a +/- 4-min window of the predicted LC elution time. While studies presented here are primarily proof of concept in nature, data suggest that the use of LC retention time prediction could be a valuable constraint for the identification of phosphopeptides within a set of off-line LC deposited sample spots. It is expected that the development of these methods will not only permit the targeted identification of protein phosphorylation sites but also allow the in-depth analysis of the dynamic events linked to the posttranslational modification.

Matrix-assisted laser desorption/ionization on-target method for the investigation of oligosaccharides and glycosylation sites in glycopeptides and glycoproteins

The significance of glycoproteins in living systems instigates the ceaseless expansion of new techniques and procedures for the analysis of biological samples. Many of these applications are focused on improving the detection limit of analyzed material. In a previous study, we described a procedure for the detection of oligosaccharides cleaved from tryptic glycopeptides. Treatment of deglycosylated fractions with phenylhydrazine gave rise to peaks consistent with labeled glycans, and both types of compounds--deglycosylated peptides and oligosaccharides--were recorded from one spot and observed in one matrix-assisted laser desorption/ionization (MALDI) mass spectrum for the first time. Here, we added an additional step to this simple procedure of deglycosylating glycopeptides directly from the target spot of the first analyzed glycosylated peptides. For the purpose of this new study, a mixture of 2-aza-2-thiothymine and phenylhydrazine hydrochloride showed to be an excellent matrix for glycopeptides, oligosaccharides, deglycosylated peptides and moreover it allowed PNGaseF to be active enough to cleave oligosaccharides from peptides. The efficiency of this procedure is demonstrated on a series of intact glycoproteins and on the analysis of tryptic peptides obtained from IgG and total mouse serum. This one-step on-target deglycosylation method with subsequent derivatization on the same spot makes MALDI-MS analyses of glycopeptides fast, simple and accessible for biological samples, where classical procedures cannot produce useful results.

Evaluation of an on-target sample preparation system for matrix-assisted laser desorption/ionization time-of-flight mass spectrometry in conjunction with normal-flow peptide high-performance liquid chromatography for peptide mass fingerprint analyses

Large-scale mass spectrometry (MS)-based proteomic analyses require high-throughput sample preparation techniques due to the increasing numbers of samples that make up a typical proteomics experiment. Moreover, extensive sample pre-treatment steps are necessary prior to MS acquisition for even the most rapid and robust MS-based proteomics methodology, matrix-assisted laser desorption/ionization time-of-flight (MALDI-TOF) MS followed by peptide mass fingerprinting (PMF) analysis. These include sample purification and fractionation, removal of digestion buffers or solvents, and spotting of sample with matrix onto the MALDI target. These multiple steps of time-consuming sample handling can result in high overall analysis costs and the likelihood of sample contamination and loss. In order to overcome some of these limitations in sample processing, we have investigated the use of a novel, simple, inexpensive 96-well elastomeric array that affixes to a MALDI target to create an on-target 96-well plate that accommodates a high solution volume (ca. 200 microL), thereby enabling the on-target processing of samples for MALDI-TOFMS. We explored several factors that influence MALDI sample preparation: type of matrix, solution volume, solution organic composition, solution drying rates and matrix/analyte co-crystallization methods. We also investigated the use of the 96-well elastomeric device for coupling MALDI-TOFMS analysis directly to high flow rate (1 mL/min) reversed-phase (rp)-HPLC. By developing an optimized, robust sample preparation protocol, we were able to obtain mass spectra with a high signal-to-noise ratio from peptide standards present at the 50-fmol level in large starting volumes of solution. PMF analyses were possible from 1-pmol and 500-fmol protein-digest standards. Coupling the device to high-flow HPLC (750 microL/min) yielded a robust and semi-automated means to obtain enhanced MALDI-TOFMS data at 500 ng of protein digest. These methodologies developed for this simple, on-target, elastomeric device show promise for streamlining the sample preparation process from HPLC to MALDI-MS.

Automated integration of monolith-based protein separation with on-plate digestion for mass spectrometric analysis of esophageal adenocarcinoma human epithelial samples

A unique approach of automating the integration of monolithic capillary HPLC-based protein separation and on-plate digestion for subsequent MALDI-MS analysis has been developed. All liquid-handling procedures were performed using a robotic module. This automated high-throughput method minimizes the amount of time and extensive labor required for traditional in-solution digestion followed by exhaustive sample cleanup and analysis. Also, precise positioning of the droplet from the capillary HPLC separation onto the MALDI plate allows for preconcentration effects of analytes for improved sensitivity. Proteins from primary esophageal Barrett's adenocarcinoma tissue were prefractionated by chromatofocusing and analyzed successfully by this automated configuration, obtaining rapid protein identifications through PMF and sequencing analyses with high sequence coverage. Additionally, intact protein molecular weight values were obtained as a means to further confirm protein identification and also to identify potential sequence modifications of proteins. This simple and rapid method is a highly versatile and robust approach for the analysis of complex proteomes.

Comparison of different separation technologies for proteome analyses: Isoform resolution as a prerequisite for the definition of protein biomarkers on the level of posttranslational modifications

In this article we evaluate methods used to reveal the molecular complexity, which is generated in biological samples by posttranslational modifications (PTM) of proteins. We show how distinct molecular differences on the level of phosphorylation sites in a single protein (ovalbumin) can be resolved with different success using 1D and 2D gel-electrophoresis and reversed-phase liquid chromatography (LC) with monolithic polystyrol-divinylbenzol (PS-DVB) columns for protein separation, and matrix-assisted laser desorption ionisation-time of flight mass spectrometry (MALDI-TOF MS) for protein identification. Phosphorylation site analysis was performed using enzymatic dephosphorylation in combination with differential peptide mass mapping. Liquid chromatography-MALDI-TOF MS coupling with subsequent on-target tryptic protein digestion turned out to be the fastest method tested but yielded low resolution for the analysis of PTM, whereas 2D gel-electrophoresis, due to its unique capability of resolving highly complex isoform pattern, turned out to be the most suitable method for this purpose. The evaluated methods complement one another and in connection with efficient technologies for differential and quantitative analysis, these approaches have the potential to reveal novel molecular details of protein biomarkers.

Proteome research based on modern liquid chromatography – tandem mass spectrometry: separation, identification and quantification

Recent developments of new generations of mass spectrometers and improvements in the field of chromatography have revolutionized protein analytics. Particularly the combination of liquid chromatography as a separation tool for proteins and peptides with tandem mass spectrometry as an identification tool referred to as LC-MS/MS has generated a powerful and broadly used technique in the field of proteomics. The resolution and sensitivity of state-of-the-art LC-MS/MS systems has reached dimensions allowing not only the analysis of individual proteins but also investigations on the level of complete proteomes. However, the enormous complexity and the extreme concentration range of proteins within typical eukaryotic proteomes are still the major challenge of this technique. This review gives an overview of modern LC-MS/MS based proteomics, describing state-of-the-art chromatography and modern mass spectrometry. Strategies to perform quantitative proteomics will be presented and capabilities as well as current limitations of this innovative methodology will be discussed.

CHASE, a charge-assisted sequencing algorithm for automated homology-based protein identifications with matrix-assisted laser desorption/ionization time-of-flight post-source decay fragmentation data

We describe CHASE, a novel algorithm for automated de novo sequencing based on the mass spectrometric (MS) fragmentation analysis of tryptic peptides. This algorithm is used for protein identification from sequence similarity criteria and consists of four steps: (1) derivatization of tryptic peptides at the N-terminus with a negatively charged reagent; (2) post-source decay (PSD) fragmentation analysis of peptides; (3) interpretation of the mass peaks with the CHASE algorithm and reconstruction of the amino acid sequence; (4) transfer of these data to software for protein identifications based on sequence homology (Basic Local Alignment Search Tool, BLAST). This procedure deduced the correct amino acid sequence of tryptic peptide samples and also was able to deduce the correct sequence from difficult mass patterns and identify the amino acid sequence. This allows complete automation of the process starting from MS fragmentation of complex peptide mixtures at low concentration (e.g. from silver-stained gel bands) to identification of the protein. We also show that if PSD data are collected in a single spectrum (instead of the segmented mode offered by conventional matrix-assisted laser desorption/ionization time-of-flight (MALDI-TOF) instrumentation), the complete workflow from MS-PSD data acquisition to similarity-based identification can be completely automated. This strategy may be applied to proteomic studies for protein identification based on automated de novo sequencing instead of MS or tandem MS patterns. We describe the Charge Assisted Sequencing Engine (CHASE) algorithm, the working protocol, the performance of the algorithm on spectra from MALDI-TOFMS and the data comparison between a TOF and a TOF-TOF instrument.