Assays of Endogenous Caspase Activities: A Comparison of Mass Spectrometry and Fluorescence Formats

A Comprehensive Exploration of Caspase Detection Methods: From Classical Approaches to Cutting-Edge Innovations

The activation of caspases is a crucial event and an indicator of programmed cell death, also known as apoptosis. These enzymes play a central role in cancer biology and are considered one promising target for current and future advancements in therapeutic interventions. Traditional methods of measuring caspase activity such as antibody-based methods provide fundamental insights into their biological functions, and are considered essential tools in the fields of cell and cancer biology, pharmacology and toxicology, and drug discovery. However, traditional methods, though extensively used, are now recognized as having various shortcomings. In addition, these methods fall short of providing solutions to and matching the needs of the rapid and expansive progress achieved in studying caspases. For these reasons, there has been a continuous improvement in detection methods for caspases and the network of pathways involved in their activation and downstream signaling. Over the past decade, newer methods based on cutting-edge state-of-the-art technologies have been introduced to the biomedical community. These methods enable both the temporal and spatial monitoring of the activity of caspases and their downstream substrates, and with enhanced accuracy and precision. These include fluorescent-labeled inhibitors (FLIs) for live imaging, single-cell live imaging, fluorescence resonance energy transfer (FRET) sensors, and activatable multifunctional probes for in vivo imaging. Recently, the recruitment of mass spectrometry (MS) techniques in the investigation of these enzymes expanded the repertoire of tools available for the identification and quantification of caspase substrates, cleavage products, and post-translational modifications in addition to unveiling the complex regulatory networks implicated. Collectively, these methods are enabling researchers to unravel much of the complex cellular processes involved in apoptosis, and are helping generate a clearer and comprehensive understanding of caspase-mediated proteolysis during apoptosis. Herein, we provide a comprehensive review of various assays and detection methods as they have evolved over the years, so to encourage further exploration of these enzymes, which should have direct implications for the advancement of therapeutics for cancer and other diseases.

Switch-on Fluorescence Analysis of Protease Activity with the Assistance of a Nickel Ion-Nitrilotriacetic Acid-Conjugated Magnetic Nanoparticle

Heterogeneous protease biosensors show high sensitivity and selectivity but usually require the immobilization of peptide substrates on a solid interface. Such methods exhibit the disadvantages of complex immobilization steps and low enzymatic efficiency induced by steric hindrance. In this work, we proposed an immobilization-free strategy for protease detection with high simplicity, sensitivity and selectivity. Specifically, a single-labeled peptide with oligohistidine-tag (His-tag) was designed as the protease substrate, which can be captured by a nickel ion-nitrilotriacetic acid (Ni-NTA)-conjugated magnetic nanoparticle (MNP) through the coordination interaction between His-tag and Ni-NTA. When the peptide was digested by protease in a homogeneous solution, the signal-labeled segment was released from the substrate. The unreacted peptide substrates could be removed by Ni-NTA-MNP, and the released segments remained in solution to emit strong fluorescence. The method was used to determine protease of caspase-3 with a low detection limit (4 pg/mL). By changing the peptide sequence and signal reporters, the proposal could be used to develop novel homogeneous biosensors for the detection of other proteases.

Mass tag-encoded nanointerfaces for multiplexed mass spectrometric analysis and imaging of biomolecules

Revealing multiple biomolecules in the physiopathological environment simultaneously is crucial in biological and biomedical research. Mass spectrometry (MS) features unique technical advantages in multiplexed and label-free analyses. However, owing to comparably low abundance and poor ionization efficiency of target biomolecules, direct MS profiling of these biological species in vitro or in situ remains a challenge. An emerging route to solve this issue is to devise mass tag (MT)-encoded nanointerfaces which specifically convert the abundance or activity of biomolecules into amplified ion signals of mass tags, offering an ideal strategy for synchronous MS assaying and mapping of multiple targets in biofluids, cells and tissues. This review provides a thorough and organized overview of recent advances in MT-encoded nanointerfaces elaborately tailored for several practical applications in multiplexed MS bioanalysis and biomedical research. First, we start with elucidation of the structural characteristics and working principle of MT-encoded nanointerfaces in specific labeling and sensing of multiple biological targets. In addition, we further discuss the application scenarios of MT-encoded nanointerfaces particularly in multiplexed biomarker assays, cell analysis, and tissue imaging. Finally, the current challenges are pointed out and future prospects of these nanointerfaces in MS analysis are forecast.

Programmed cell death detection methods: a systematic review and a categorical comparison

Programmed cell death is considered a key player in a variety of cellular processes that helps to regulate tissue growth, embryogenesis, cell turnover, immune response, and other biological processes. Among different types of cell death, apoptosis has been studied widely, especially in the field of cancer research to understand and analyse cellular mechanisms, and signaling pathways that control cell cycle arrest. Hallmarks of different types of cell death have been identified by following the patterns and events through microscopy. Identified biomarkers have also supported drug development to induce cell death in cancerous cells. There are various serological and microscopic techniques with advantages and limitations, that are available and are being utilized to detect and study the mechanism of cell death. The complexity of the mechanism and difficulties in distinguishing among different types of programmed cell death make it challenging to carry out the interventions and delay its progression. In this review, mechanisms of different forms of programmed cell death along with their conventional and unconventional methods of detection of have been critically reviewed systematically and categorized on the basis of morphological hallmarks and biomarkers to understand the principle, mechanism, application, advantages and disadvantages of each method. Furthermore, a very comprehensive comparative analysis has been drawn to highlight the most efficient and effective methods of detection of programmed cell death, helping researchers to make a reliable and prudent selection among the available methods of cell death assay. Conclusively, how programmed cell death detection methods can be improved and can provide information about distinctive stages of cell death detection have been discussed.

Integration of exonuclease III-powered three-dimensional DNA walker with single-molecule detection for multiple initiator caspases assay

Initiator caspases are important components of cellular apoptotic signaling and they can activate effector caspases in extrinsic and intrinsic apoptotic pathways. The simultaneous detection of multiple initiator caspases is essential for apoptosis mechanism studies and disease therapy. Herein, we develop a sensitive nanosensor based on the integration of exonuclease III (Exo III)-powered three-dimensional (3D) DNA walker with single-molecule detection for the simultaneous measurement of initiator caspase-8 and caspase-9. This assay involves two peptide-DNA detection probe-conjugated magnetic beads and two signal probe-conjugated gold nanoparticles (signal probes@AuNPs). The presence of caspase-8 and caspase-9 can induce the cleavage of peptides in two peptide-DNA detection probes, releasing two trigger DNAs from the magnetic beads, respectively. The two trigger DNAs can serve as the walker DNA to walk on the surface of the signal probes@AuNPs powered by Exo III digestion, liberating numerous Cy5 and Texas Red fluorophores which can be quantified by single-molecule detection, with Cy5 indicating caspase-8 and Texas Red indicating caspase-9. Notably, the introduction of the AuNP-based 3D DNA walker greatly reduces the background signal and amplifies the output signals, and the introduction of single-molecule detection further improves the detection sensitivity. This nanosensor is very sensitive with a detection limit of 2.08 × 10-6 U μL-1 for caspase-8 and 1.71 × 10-6 U μL-1 for caspase-9, and it can be used for the simultaneous screening of caspase inhibitors and the measurement of endogenous caspase activity in various cell lines at the single-cell level. Moreover, this nanosensor can be extended to detect various proteases by simply changing the peptide sequences of the detection probes.

Mass Spectrometric Biosensing: A Powerful Approach for Multiplexed Analysis of Clinical Biomolecules

Rapid and sensitive detection of clinical biomolecules in a multiplexed fashion is of great importance for accurate diagnosis of diseases. Mass spectrometric (MS) approaches are exceptionally suitable for clinical analysis due to its high throughput, high sensitivity, and reliable qualitative and quantitative capabilities. To break through the bottleneck of MS technique for detecting high-molecular-weight substances with low ionization efficiency, the concept of mass spectrometric biosensing has been put forward by adopting mass spectrometric chips to recognize the targets and mass spectrometry to detect the signals switched by the recognition. In this review, the principle of mass spectrometric sensing, the construction of different mass tags used for biosensing, and the typical combination mode of mass spectrometric imaging (MSI) technique are summarized. Future perspectives including the design of portable matching platforms, exploitation of novel mass tags, development of effective signal amplification strategies, and standardization of MSI methodologies are proposed to promote the advancements and practical applications of mass spectrometric biosensing.

UPLC-MS/MS Method for Analysis of Endocannabinoid and Related Lipid Metabolism in Mouse Mucosal Tissue

The endocannabinoid system is expressed in cells throughout the body and controls a variety of physiological and pathophysiological functions. We describe robust and reproducible UPLC-MS/MS-based methods for analyzing metabolism of the endocannabinoids, 2-arachidonoyl-sn-glycerol and arachidonoyl ethanolamide, and related monoacylglycerols (MAGs) and fatty acid ethanolamides (FAEs), respectively, in mouse mucosal tissues (i.e., intestine and lung). These methods are optimized for analysis of activity of the MAG biosynthetic enzyme, diacylglycerol lipase (DGL), and MAG degradative enzymes, monoacylglycerol lipase (MGL) and alpha/beta hydrolase domain containing-6 (ABHD6). Moreover, we describe a novel UPLC-MS/MS-based method for analyzing activity of the FAE degradative enzyme, fatty acid amide hydrolase (FAAH), that does not require use of radioactive substrates. In addition, we describe in vivo pharmacological methods to inhibit MAG biosynthesis selectively in the mouse small-intestinal epithelium. These methods will be useful for profiling endocannabinoid metabolism in rodent mucosal tissues in health and disease.

Reducing False Positives through the Application of Fluorescence Lifetime Technology: A Comparative Study Using TYK2 Kinase as a Model System

The predominant assay detection methodologies used for enzyme inhibitor identification during early-stage drug discovery are fluorescence-based. Each fluorophore has a characteristic fluorescence decay, known as the fluorescence lifetime, that occurs throughout a nanosecond-to-millisecond timescale. The measurement of fluorescence lifetime as a reporter for biological activity is less common than fluorescence intensity, even though the latter has numerous issues that can lead to false-positive readouts. The confirmation of hit compounds as true inhibitors requires additional assays, cost, and time to progress from hit identification to lead drug-candidate optimization. To explore whether the use of fluorescence lifetime technology (FLT) can offer comparable benefits to label-free-based approaches such as RapidFire mass spectroscopy (RF-MS) and a superior readout compared to time-resolved fluorescence resonance energy transfer (TR-FRET), three equivalent assays were developed against the clinically validated tyrosine kinase 2 (TYK2) and screened against annotated compound sets. FLT provided a marked decrease in the number of false-positive hits when compared to TR-FRET. Further cellular screening confirmed that a number of potential inhibitors directly interacted with TYK2 and inhibited the downstream phosphorylation of the signal transducer and activator of transcription 4 protein (STAT4).

Protease Biosensor by Conversion of a Homogeneous Assay into a Surface-Tethered Electrochemical Analysis Based on Streptavidin-Biotin Interactions

This work proposed a new sensing strategy for protease detection by converting a homogeneous assay into a surface-tethered electrochemical analysis. Streptavidin (SA), a tetramer protein, was used as the sensing unit based on the SA-biotin coupling chemistry. Caspase-3 was used as the model analyte, and a biotinylated peptide with a sequence of biotin-GDEVDGK-biotin was designed as the substrate. Specifically, the peptide substrate could induce an assembly of SA to form (SA-biotin-GDEVDGK-biotin)_n aggregates through SA-biotin interactions, which was confirmed by atomic force microscopy (AFM). The peptide substrate-induced assembly of SA was facilely initiated on an electrode-liquid surface by modification of the electrode with SA. The in situ formation of (SA-biotin-GDEVDGK-biotin)_n aggregates created an insulating layer, thus limiting the electron transfer of ferricyanide. Once the peptide substrate was cleaved into two shorter fragments (biotin-GDEVD and GK-biotin) by caspase-3, the resulting products would compete with biotin-GDEVDGK-biotin to bind SA proteins immobilized on the electrode surface and distributed in a solution, thus preventing the in situ formation of (SA-biotin-GDEVDGK-biotin)_n assemblies. With the simple principle of the substrate-induced assembly of SA, a dual-signal amplification was achieved with improved sensitivity. Taking advantage of high sensitivity, simple principle, and easy operation, this method can be augmented to design various surface-tethered biosensors for practical applications.

High-Throughput Mass Spectrometry for Hit Identification: Current Landscape and Future Perspectives

For nearly two decades mass spectrometry has been used as a label-free, direct-detection method for both functional and affinity-based screening of a wide range of therapeutically relevant target classes. Here, we present an overview of several established and emerging mass spectrometry platforms and summarize the unique strengths and performance characteristics of each as they apply to high-throughput screening. Multiple examples from the recent literature are highlighted in order to illustrate the power of each individual technique, with special emphasis given to cases where the use of mass spectrometry was found to be differentiating when compared with other detection formats. Indeed, as many of these examples will demonstrate, the inherent strengths of mass spectrometry-sensitivity, specificity, wide dynamic range, and amenability to complex matrices-can be leveraged to enhance the discriminating power and physiological relevance of assays included in screening cascades. It is our hope that this review will serve as a useful guide to readers of all backgrounds and experience levels on the applicability and benefits of mass spectrometry in the search for hits, leads, and, ultimately, drugs.

Temporal Sampling of Enzymes from Live Cells by Localized Electroporation and Quantification of Activity by SAMDI Mass Spectrometry

Measuring changes in enzymatic activity over time from small numbers of cells remains a significant technical challenge. In this work, a method for sampling the cytoplasm of cells is introduced to extract enzymes and measure their activity at multiple time points. A microfluidic device, termed the live cell analysis device (LCAD), is designed, where cells are cultured in microwell arrays fabricated on polymer membranes containing nanochannels. Localized electroporation of the cells opens transient pores in the cell membrane at the interface with the nanochannels, enabling extraction of enzymes into nanoliter-volume chambers. In the extraction chambers, the enzymes modify immobilized substrates, and their activity is quantified by self-assembled monolayers for matrix-assisted laser desorption/ionization (SAMDI) mass spectrometry. By employing the LCAD-SAMDI platform, protein delivery into cells is demonstrated. Next, it is shown that enzymes can be extracted, and their activity measured without a loss in viability. Lastly, cells are sampled at multiple time points to study changes in phosphatase activity in response to oxidation by hydrogen peroxide. With this unique sampling device and label-free assay format, the LCAD with SAMDI enables a powerful new method for monitoring the dynamics of cellular activity from small populations of cells.

Protease-responsive mass barcoded nanotranslators for simultaneously quantifying the intracellular activity of cascaded caspases in apoptosis pathways

Quantitatively delineating the activation network of multiple proteases that participate in cellular processes is highly essential for understanding the physiological and pathological states of cells. In this study, protease-responsive mass barcoded nanotranslators (PRMNTs) were engineered for revealing the activity of cascaded caspases in apoptosis in a multiplex and quantitative manner. In the PRMNTs, a series of mass tag-decorated gold nanoparticles (AuNPs) were tethered onto magnetic Fe₃O₄ nanospheres via a linker containing the substrate peptide of the target protease to form a "one-to-many" core-satellite structure. This nanostructure was internalized into the cells, underwent an enzymatic reaction within the cells, and allowed post-reaction mass spectrometry (MS) interrogation after magnetic separation from the cells. In the presence of intracellular caspases, enzymatic cleavage of the linker could be translated to the decreased ion signals of the mass tags on the remaining AuNPs in the PRMNTs by MS decoding. Benefiting from the multiplexing capability of MS, the intracellular activity of caspase-3, -8 and -9 that orchestrate the apoptotic process was simultaneously quantified at any given time. Kinetic analysis of caspase activity under stimulation of diverse anticancer drugs revealed that programmed cell death followed individual apoptosis pathways, differing in the activation degree and sequence of the caspase cascade. This work represents a modality that interfaces nanotechnology with MS for quantitatively probing the intracellular activity of multiple proteases, which opens up new avenues for revealing the apoptosis mechanism and developing innovative drugs.

Label-free and amplified detection of apoptosis-associated caspase activity using branched rolling circle amplification

We develop a label-free fluorescence method for ultrasensitive detection of apoptosis-associated caspase activity based on branched rolling circle amplification.

Selenium-isotopic signature toward mass spectrometric identification and enzyme activity assay

The unraveling of enzymatic reactions, especially identification of enzymatic substrates or products, is important to elucidate biological processes. Here a selenium-isotopic signature for mass spectrometric identification of enzymatic-related species is demonstrated by using selenium-containing peptides (SePeps) as substrates. Thus a strategy is proposed for rapid and precise assay of multiple enzyme activity. These SePeps can be synthesized by introduction of one selenomethionine residue in the sequence and simply identified in the full-scan mode with the feature of distinctive selenium-isotopic distribution without MS/MS verifications, which proposes a novel solution to the specific identification of enzyme-related species, allows to exclude the interferences of species with tiny mass differences in bio-samples, and meanwhile can offer a judgement on data accuracy for the analysis of enzyme activities. As a proof-of-concept, a method for multiple analysis of two representative enzymes in MCF-7 cell lysate has been developed with the isotopic peak areas of either SePep substrates or enzymatic products with the top intensities. These results could be the foundation to extend the method for more complicated enzyme systems. The selenium-isotopic signature provides a powerful protocol for high-throughput assays of peptide-metabolizing enzymes with enhanced confidence and can be extended to screen enzymatic reaction-related substrates.

Exploration of the nanomedicine-design space with high-throughput screening and machine learning

Only a tiny fraction of the nanomedicine-design space has been explored, owing to the structural complexity of nanomedicines and the lack of relevant high-throughput synthesis and analysis methods. Here, we report a methodology for determining structure-activity relationships and design rules for spherical nucleic acids (SNAs) functioning as cancer-vaccine candidates. First, we identified ~1,000 candidate SNAs on the basis of reasonable ranges for 11 design parameters that can be systematically and independently varied to optimize SNA performance. Second, we developed a high-throughput method for making SNAs at the picomolar scale in a 384-well format, and used a mass spectrometry assay to rapidly measure SNA immune activation. Third, we used machine learning to quantitatively model SNA immune activation and identify the minimum number of SNAs needed to capture optimum structure-activity relationships for a given SNA library. Our methodology is general, can reduce the number of nanoparticles that need to be tested by an order of magnitude, and could serve as a screening tool for the development of nanoparticle therapeutics.

Sensitive detection of caspase-3 enzymatic activities and inhibitor screening by mass spectrometry with dual maleimide labelling quantitation

There is a great need to develop sensitive and specific methods for quantitative analysis of caspase-3 activities in cell apoptosis.

Traceless Immobilization of Analytes for High-Throughput Experiments with SAMDI Mass Spectrometry

Label-free assays, and particularly those based on the combination of mass spectroscopy with surface chemistries, enable high-throughput experiments of a broad range of reactions. However, these methods can still require the incorporation of functional groups that allow immobilization of reactants and products to surfaces prior to analysis. In this paper, we report a traceless method for attaching molecules to a self-assembled monolayer for matrix-assisted laser desorption and ionization (SAMDI) mass spectrometry. This method uses monolayers that are functionalized with a 3-trifluoromethyl-3-phenyl-diazirine group that liberates nitrogen when irradiated and gives a carbene that inserts into a wide range of bonds to covalently immobilize molecules. Analysis of the monolayer with SAMDI then reveals peaks for each of the adducts formed from molecules in the sample. This method is applied to characterize a P450 drug metabolizing enzyme and to monitor a Suzuki–Miyaura coupling chemical reaction and is important because modification of the substrates with a functional group would alter their activities. This method will be important for high-throughput experiments in many areas, including reaction discovery and optimization.

An Unusual Salt Effect in an Interfacial Nucleophilic Substitution Reaction

This paper reports a kinetic characterization of the interfacial reaction of N-methylpyrrolidine with a self-assembled monolayer presenting an iodoalkyl group. SAMDI (self-assembled monolayers for matrix-assisted laser desorption/ionization) mass spectrometry was used to determine the extent of reaction for monolayers that were treated with a range of concentrations of the nucleophile for a range of times. These data revealed a second-order rate constant for the reaction that was approximately 100-fold greater than that for the analogous solution-phase reaction. However, addition of sodium iodide to the reaction mixture resulted in a 7-fold decrease in the reaction rate. Addition of bromide and chloride salts also gave slower rate constants for the reaction, but only at 100- and 1000-fold higher concentrations than was observed with iodide, respectively. The corresponding solution-phase reactions, by contrast, had rate constants that were unaffected by the concentration of halide salts. This work provides a well-characterized example illustrating the extent to which the kinetics and properties of an interfacial reaction can depart substantially from their better-understood solution-phase counterparts.

Cellular Assays with a Molecular Endpoint Measured by SAMDI Mass Spectrometry

Cell-based, high-throughput screening (HTS) assays are increasingly important tools used in drug discovery, but frequently rely on readouts of gene expression or phenotypic changes and require development of specialized, labeled reporters. Here a cell-based, label-free assay compatible with HTS is introduced that can report quantitatively on enzyme activities by measuring mass changes of substrates with matrix-assisted laser desorption/ionization mass spectrometry. The assay uses self-assembled monolayers to culture cells on arrays presenting substrates, which serve as reporters for a desired enzyme activity. Each spot of cells is treated with a compound, cultured and lysed, enabling endogenous enzymes to act on the immobilized peptide substrate. It is demonstrated that the assay can measure protein tyrosine phosphatase (PTP) activity from as few as five cells and a screen is described that identifies a compound that reduces PTP activity in cell lysates. This approach offers a valuable addition to the methods available for cell-based screening.

MALDI-MS Patterning of Caspase Activities and Its Application in the Assessment of Drug Resistance

Mass spectrometry (MS) has been widely used for enzyme activity assays. Herein, we propose a MALDI-MS patterning strategy for the convenient visual presentation of multiple enzyme activities with an easy-to-prepare chip. The array-based caspase-activity patterned chip (Casp-PC) is fabricated by hydrophobically assembling different phospholipid-tagged peptide substrates on a modified ITO slide. The advantages of amphipathic phospholipids lead to high-quality mass spectra for imaging analysis. Upon the respective cleavage of these substrates by different caspases, such as caspase-1, -2, -3, and -8, to produce a mass shift, the enzyme activities can be directly evaluated by MALDI-MS patterning by m/z-dependent imaging of the cleavage products. The ability to identify drug-sensitive/resistant cancer cells and assess the curative effects of anticancer drugs is demonstrated, indicating the applicability of the method and the designed chip.

High throughput screening of enzyme activity with mass spectrometry imaging

Mass spectrometry imaging (MSI) has found a diversity of applications ranging from localizing metabolites and proteins in tissues to investigating microbial interactions, and as a result is perhaps the fastest growing subfield of mass spectrometry. Advances in surface mass spectrometry technologies are equally applicable to the analysis of arrayed samples. One promising field in which this capacity has been leveraged is the high-throughput analysis of enzyme activity, an important step in the development of a wide range of biotechnologies. This review article describes several emerging approaches that seek to improve the quality and scope of this application of MSI.

Profiling deacetylase activities in cell lysates with peptide arrays and SAMDI mass spectrometry

The development of arrays that can profile molecular activities in cells is important to understanding signaling pathways in normal and pathological settings. While oligonucleotide arrays are now routinely used to profile global gene expression, there is still a lack of tools for profiling enzyme activities in cell lysates. This paper describes the combination of peptide arrays formed on self-assembled monolayers and mass spectrometry to provide a label-free approach for identifying patterns of enzyme activities in cell lysates. The approach is demonstrated by profiling lysine deacetylase (KDAC) activities in cell lysates of the CHRF megakaryocytic (Mk) cell line. Class-specific deacetylase inhibitors were used to show that terminal Mk differentiation of CHRF cells is marked by a pronounced decrease in sirtuin activity and by little change in activity of KDACs 1-11. This work establishes a platform that can be used to identify changes in global activity profiles of cell lysates for a wide variety of enzymatic activities.

A label-free LC/MS/MS-based enzymatic activity assay for the detection of genuine caspase inhibitors and SAR development

The resurgence of interest in caspases (Csp) as therapeutic targets for the treatment of neurodegenerative diseases prompted us to examine the suitability of published nonpeptidic Csp-3 and Csp-6 inhibitors for our medicinal chemistry programs. To support this effort, fluorescence-based Csp-2, Csp-3, and Csp-6 enzymatic assays were optimized for robustness against apparent enzyme inhibition caused by redox-cycling or aggregating compounds. The data obtained under these improved conditions challenge the validity of previously published data on Csp-3 and Csp-6 inhibitors for all but one series, namely, the isatins. Furthermore, in this series, it was observed that the nature of the rhodamine-labeled substrate, typically used to measure caspase activity, interfered with the pharmacological sensitivity of the Csp-2 assay. As a result, a liquid chromatography/tandem mass spectrometry-based assay that eliminates label-dependent assay interference was developed for Csp-2 and Csp-3. In these label-free assays, the activity values of the Csp-2 and Csp-3 reference inhibitors were in agreement with those obtained with the fluorogenic substrates. However, isatin 10a was 50-fold less potent in the label-free Csp-2 assay compared with the rhodamine-based fluorescence format, thus proving the need for an orthogonal readout to validate inhibitors in this class of targets highly susceptible to artifactual inhibition.

Probing enzymatic activity inside living cells using a nanowire-cell "sandwich" assay

Developing a detailed understanding of enzyme function in the context of an intracellular signal transduction pathway requires minimally invasive methods for probing enzyme activity in situ. Here, we describe a new method for monitoring enzyme activity in living cells by sandwiching live cells between two vertical silicon nanowire (NW) arrays. Specifically, we use the first NW array to immobilize the cells and then present enzymatic substrates intracellularly via the second NW array by utilizing the NWs' ability to penetrate cellular membranes without affecting cells' viability or function. This strategy, when coupled with fluorescence microscopy and mass spectrometry, enables intracellular examination of protease, phosphatase, and protein kinase activities, demonstrating the assay's potential in uncovering the physiological roles of various enzymes.

A novel fluorescence reaction for N-terminal Ser-containing peptides and its application to assay caspase activity

Caspases are the key regulatory factors of apoptosis and are also found to be involved in inflammatory cytokinesis. Sensitive and selective determination of caspases has significant importance in evaluation of apoptosis, disease diagnosis, and drug development. Here, we developed an assay method for the determination of caspase activity. This method is based on a novel fluorescence (FL) reaction selective for N-terminal Ser-containing peptides. FL derivatization of peptides requires heating in the presence of catechol, HEPES buffer (pH 7.5), and sodium periodate. Under optimized conditions, the reaction showed a unique sequence preference for N-terminal Ser-containing peptides, and a lower detection limit (signal/noise [S/N] = 3) of approximately 0.1 μM was obtained for SKTS and SSNSF. Acetylated substrates were enzymatically cleaved to produce N-terminal Ser-containing peptides, which were selectively converted to FL compounds. The enzyme activities were simultaneously determined as low as 2 U (4.3 nM) caspase-3 and 2.5 U (3.3 nM) caspase-8 by high-performance liquid chromatography (HPLC) with FL detection. The proposed assay method does not require any labeled substrates and can be applied to evaluate cell-based apoptosis and also to study apoptosis inhibitors or inducers.

A novel fluorescence derivatization method combined with HPLC for determining the activities of endogenous caspase

A novel fluorescence derivatization method combined with HPLC was developed to detect the activity of caspase-3 and -8 in two cell lines (Hela cells and A549 cells) which were activated by low temperature-assisted ultraviolet irradiation (LT-UV), mitomycin C (MMC) and camptothecin during the apoptosis, respectively. Two peptide substrates for either caspase-3 or -8 were designed, of which peptide fragments were obtained by enzymatic modification, followed by fluorescence derivatization. A single fluorescent product was formed when a peptide was heated at 120 °C for 10 min in a neutral aqueous medium (pH 7.0) containing catechol, sodium periodate and sodium borate. Commercial kits for detecting the activity of caspase-3 and -8 were used as a control. The relative activity of the caspases detected by fluorescence derivatization was similar to that obtained by commercial kits, which indicated that the novel method is reliable. The activity assays of recombinant human caspases showed that the novel method provided higher selectivity than that of commercial kits, which proved it to be more accurate for determining the activity of caspases in apoptosis.

Conjugated polymer-based real-time fluorescence caspase assays

We have developed conjugated polyelectrolyte-based fluorescence turn-on assays for caspase 3 and 8. These assays are composed of a cationic polyphenylene ethynylene polymer PPE4+ and p-nitroaniline modified caspase peptide substrate. The fluorescence of the assay is initially turned-off because of the efficient quenching of the polymer by p-nitroaniline moiety on anionic peptide substrates. A turn-on effect is observed due to the cleavage of the peptide by the enzyme and formation of the neutral p-nitroaniline unit which has no quenching on the polymer. We validated this assay design and obtained kinetic parameters of caspase 3 and caspase 8. These assays demonstrated good sensitivity as in pmol/L (0.1 units/mL) for caspase 3 and nmol/L (0.2 units/mL) for caspase 8. This method also showed high specificity by using caspase 3 assay as a model system and the results demonstrated that other proteases including caspase 8, papain, pepsin, and trypsin did not show observable fluorescence turn-on effect. The dose-response curve of a caspase inhibitor Z-VAD-FMK was evaluated by caspase 3 assay, by which the IC(50) value was determined to be 0.73 μM and was in a good agreement with the literature reported value at 0.62 μM. This design could be applied into the in vitro screening of small molecular inhibitors for drug discovery.

Determining protease substrate selectivity and inhibition by label-free supramolecular tandem enzyme assays

An analytical method has been developed for the continuous monitoring of protease activity on unlabeled peptides in real time by fluorescence spectroscopy. The assay is enabled by a reporter pair comprising the macrocycle cucurbit[7]uril (CB7) and the fluorescent dye acridine orange (AO). CB7 functions by selectively recognizing N-terminal phenylalanine residues as they are produced during the enzymatic cleavage of enkephalin-type peptides by the metalloendopeptidase thermolysin. The substrate peptides (e.g., Thr-Gly-Ala-Phe-Met-NH(2)) bind to CB7 with moderately high affinity (K ≈ 10(4) M(-1)), while their cleavage products (e.g., Phe-Met-NH(2)) bind very tightly (K > 10(6) M(-1)). AO signals the reaction upon its selective displacement from the macrocycle by the high affinity product of proteolysis. The resulting supramolecular tandem enzyme assay effectively measures the kinetics of thermolysin, including the accurate determination of sequence specificity (Ser and Gly instead of Ala), stereospecificity (d-Ala instead of l-Ala), endo- versus exopeptidase activity (indicated by differences in absolute fluorescence response), and sensitivity to terminal charges (-CONH(2) vs -COOH). The capability of the tandem assay to measure protease inhibition constants was demonstrated on phosphoramidon as a known inhibitor to afford an inhibition constant of (17.8 ± 0.4) nM. This robust and label-free approach to the study of protease activity and inhibition should be transferable to other endo- and exopeptidases that afford products with N-terminal aromatic amino acids.

Peptide arrays identify isoform-selective substrates for profiling endogenous lysine deacetylase activity

This paper reports the development of a class of isoform-selective peptide substrates for measuring endogenous lysine deacetylase (KDAC) activities in cell culture. The peptides were first identified by comparing the substrate specificity profiles of the four KDAC isoforms KDAC2, KDAC3, KDAC8, and sirtuin 1 (SIRT1) on a 361-member hexapeptide array wherein the two C-terminal residues to the acetylated lysine were varied. The arrays were prepared by immobilizing the peptides to a self-assembled monolayer of alkanethiolates on gold and could therefore be analyzed by a mass spectrometry technique termed SAMDI (self-assembled monolayers for matrix assisted laser desorption/ionization time-of-flight mass spectrometry). Arrays presenting the selective substrates were treated with nuclear extracts from HeLa, Jurkat, and smooth muscle cells and analyzed to measure endogenous deacetylase activities. We then use the arrays to profile KDAC activity through the HeLa cell cycle. We find that the activity profile of the KDAC3 selective peptide closely mirrors the changing acetylation state of the H4 histone, suggesting a role for this enzyme in cell cycle regulation. This work is significant because it describes a general route for identifying selective substrates that can be used to understand the differential roles of members of the deacetylase enzyme family in complex biological processes and further because the label-free approach avoids perturbation of enzyme activity that has plagued fluorescence-based assays.

Profiling the selectivity of DNA ligases in an array format with mass spectrometry

This article describes a method for the global profiling of the substrate specificities of DNA ligases and illustrates examples using the Taq and T4 DNA ligases. The method combines oligonucleotide arrays, which offer the benefits of high throughput and multiplexed assays, with mass spectrometry to permit label-free assays of ligase activity. Arrays were prepared by immobilizing ternary biotin-tagged DNA substrates to a self-assembled monolayer presenting a layer of streptavidin protein. The array represented complexes having all possible matched and mismatched base pairs at the 3′ side of the nick site and also included a number of deletions and insertions at this site. The arrays were treated with ligases and adenosine triphosphate or analogs of the nucleotide triphosphate and then analyzed by matrix-assisted laser desorption-ionization mass spectrometry to determine the yields for both adenylation of the 5′-probe strand and joining of the two probe strands. The resulting activity profiles reveal the basis for specificity of the ligases and also point to strategies that use ATP analogs to improve specificity. This work introduces a method that can be applied to profile a broad range of enzymes that operate on nucleic acid substrates.

A potent reporter applicable to the monitoring of caspase-3-dependent proteolytic cleavage

In this study, we developed a chimeric caspase-3 substrate (GST:DEVD:EGFP) comprised of glutathione-S transferase (GST) and enhanced green fluorescent protein (EGFP) with a specialized linker peptide harboring the caspase-3 cleavage sequence, DEVD. Using this reporter, we assessed the proteolytic cleavage of the artificial caspase-3 substrate for caspase-3. The common feature of this approach is that the presence of the DEVD sequence between GST and EGFP allows for caspase-3-dependent cleavage after the Asp (D) residue, resulting in the elimination of EGFP from the GST:DEVD:EGFP reporter. To the best of our knowledge, this study reports the first application employing a chimeric protein substrate, with the similar accuracy level compared to the conventional methods such as fluorometric assays. As a result, using this GST:DEVD:EGFP reporter, caspase-3 activation based on proteolytic properties could be monitored via a variety of bioanalytical techniques such as immunoblot analysis, glutathione-agarose bead assay, and on-chip visualization, providing both technical and economical advantages over the extensively utilized fluorogenic peptide assay. Our results convincingly showed that this versatile reporter (GST:DEVD:EGFP) constitutes a useful system for the monitoring of caspase-3 activation, potentially enabling the monitoring of the proteolytic activities of different intra-cellular proteases via the substitution of the cleavage sequence within the same schematic construct.

Biochemical assays of immobilized oligonucleotides with mass spectrometry

This paper reports the use of mass spectrometry to characterize oligonucleotides immobilized to the surfaces of biochips. Biotinylated oligonucleotides were immobilized to self-assembled monolayers that present a streptavidin layer and then treated with a complementary strand to present short duplexes. Treatment of the surface with 5-methoxysalicylic acid and ammonium citrate matrix allows the individual oligonucleotides to be observed by matrix-assisted laser desorption/iozation and time-of-flight mass spectrometry (MALDI-TOF MS). Examples are shown wherein this method is applied to assays of hybridization, of cleavage by a deoxyribozyme, of a dephosphorylation reaction, and of the adducts formed on treatment of DNA with cis-platin. This work provides an early example of the application of mass spectrometry to DNA biochips and may substantially expand the applications of the now common oligonucleotide arrays.

The activity of HDAC8 depends on local and distal sequences of its peptide substrates

This paper introduces a flexible assay for characterizing the activities of the histone deacetylase enzymes. The approach combines mass spectrometry with self-assembled monolayers that present acetylated peptides and enables a label-free and one-step assay of this biochemical activity. The assay was used to characterize the activity of HDAC8 toward peptides taken from the N-terminal tail of the H4 histone and reveals that a distal region of the peptide substrate interacts with the deacetylase at an exosite and contributes to the activity of the substrate. Specifically, a peptide corresponding to residues 8−19 of H4 and having lysine 12 acetylated is an active substrate, but removal of the KRHR (residues 16−19) sequence abolishes activity. Mutation of glycine 11 to arginine in the peptide lacking the KRHR sequence restores activity, demonstrating that both local and distal sequences act synergistically to regulate the activity of the HDAC. Assays with peptides bearing multiply acetylated residues, but in which each acetyl group is isotopically labeled, permit studies of the processive deacetylation of peptides. Peptide substrates having an extended sequence that includes K20 were used to demonstrate that methylation of this residue directly affects HDAC8 activity at K12. This work provides a mechanistic basis for the regulation of HDAC activities by distal sequences and may contribute to studies aimed at evaluating the role of the histone code in regulating gene expression.

Combining self-assembled monolayers and mass spectrometry for applications in biochips

Biochip arrays have enabled the massively parallel analysis of genomic DNA and hold great promise for application to the analysis of proteins, carbohydrates, and small molecules. Surface chemistry plays an intrinsic role in the preparation and analysis of biochips by providing functional groups for immobilization of ligands, providing an environment that maintains activity of the immobilized molecules, controlling nonspecific interactions of analytes with the surface, and enabling detection methods. This review describes recent advances in surface chemistry that enable quantitative assays of a broad range of biochemical activities. The discussion emphasizes the use of self-assembled monolayers of alkanethiolates on gold as a structurally well-defined and synthetically flexible platform for controlling the immobilization and activity of molecules in an array. The review also surveys recent methods of performing label-free assays, and emphasizes the use of matrix-assisted laser desorption/ionization mass spectrometry to directly observe molecules attached to the self-assembled monolayers.

Mass spectrometry of self-assembled monolayers: a new tool for molecular surface science

Most reactions can be performed in solution and on a surface, yet the challenges faced in applying known reactions or in developing entirely new reactions for modifying surfaces remain formidable. The products of many reactions performed in solution can be characterized in minutes, and even products having complex structures can be characterized in hours. When performed on surfaces, even the most basic reactions require a substantial effort--requiring several weeks--to characterize the yields and structures of the products. This contrast stems from the lack of convenient analytical tools that provide rapid information on the structures of molecules attached to a surface. This review describes recent work that has established mass spectrometry as a powerful method for developing and characterizing a broad range of chemical reactions of molecules attached to self-assembled monolayers of alkanethiolates on gold. The SAMDI-TOF mass spectrometry technique will enable a next generation of applications of molecularly defined surfaces to problems in chemistry and biology.

Self-assembled monolayers for MALDI-TOF mass spectrometry for immunoassays of human protein antigens

This paper reports a method that combines self-assembled monolayers with matrix-assisted laser desorption/ionization time-of-flight mass spectrometry to perform immunoassays on clinical samples. The immunosensors are prepared by immobilizing His-tagged protein G (or A) to a monolayer presenting the Ni2+ chelates, followed by immobilization of IgG antibodies with specificity for the intended analyte. The SAMDI mass spectrometry technique confirms the presence of the two proteins on the immunosensor and additionally provides a label-free analysis of antigens that bind to the sensor. This paper reports examples of detecting several proteins from human serum, including multianalyte assays that resolve each analyte according to their mass-to-charge ratio in the SAMDI spectra. An example is described wherein SAMDI is used to identify a proteolytic fragment of cystatin C in cerebral spinal fluids from patients diagnosed with multiple sclerosis. The SAMDI-TOF immunoassay, which combines well-defined surface chemistries for the selective and reproducible localization of analytes with mass spectrometry for label-free detection of analytes, may offer an alternative methodology to address many of the issues associated with standardized clinical diagnostics.