Nanophase-Separated Amphiphilic Conetworks as Versatile Matrixes for Optical Chemical and Biochemical Sensors

Structurally Heterogeneous Amphiphilic Conetworks of Poly(vinyl imidazole) Derivatives with Potent Antimicrobial Properties and Cytocompatibility

We report the construction of amphiphilic conetwork (APCN)-based surfaces with potent antimicrobial activity and biofilm inhibition ability. The construction strategy is based on the separation of lipophilic alkyl groups (>C6) from the cationic network to obtain good antibacterial properties. The reaction of partially alkylated poly(vinyl imidazole) with the activated halide compounds followed by coating a glass or poly(dimethylsiloxane) (PDMS) sheet leads to the formation of the APCN surface. The dangling alkyl chains, crosslinking junctions, and unreacted vinyl imidazole groups are heterogeneously distributed in the APCNs. The swelling, mechanical property, and phase morphology of the APCN films have been evaluated. Bacterial cell disrupting potency of the APCN coatings increases with increasing alkyl chain length from C6 to C18 with somewhat more of an effect on Escherichia coli as compared to Bacillus subtilis bacteria. The minimum inhibitory amount of the APCNs on glass and a hydrophobic PDMS surface is in the range of 0.02-0.04 mg/cm2 depending on the chain length of the alkyl and the degree of quaternization. The effect of the type of crosslinker for the construction of the conetwork on the antimicrobial property has been evaluated to elucidate the exclusive design of the APCNs. The APCN-based coatings provide potent biocidal activity without much negatively affecting the hemocompatibility and cytocompatibility. These APCNs provide a good model system for comparative evaluation of the biocidal property and structural effect on the biocidal activity.

Physical, Electrochemical, and Solvent Permeation Properties of Amphiphilic Conetwork Membranes Formed through Interlinking of Poly(vinylidene fluoride)-Graft-Poly[(2-dimethylamino)ethyl Methacrylate] with Telechelic Poly(ethylene glycol) and Small Molecular Weight Cross-Linkers

We report the preparation of dense and porous amphiphilic conetwork (APCN) membranes through the covalent interconnection of poly(vinylidene fluoride)-graft-poly[(2-dimethylamino)ethyl methacrylate] (PVDF-g-PDMAEMA) copolymers with telechelic poly(ethylene glycol) (PEG) or α,α-dichloro-p-xylene (XDC). The dense APCN membranes exhibit varying solvent swelling and mechanical properties depending on the compositions and overall crystallinity. The crystallinity of both PVDF (20-47%) and PEG (9-17%) is significantly suppressed in the dense APCNs prepared through the interconnection of PVDF-g-PDMAEMA with reactive PEG as compared to the APCN membranes (48-53%) prepared with XDC as well as mechanical blend of PVDF-g-PDMAEMA plus nonreactive PEG. The dense APCN membranes exhibit a good transport number of monovalent ions and ionic conductivity. The APCN membrane interconnected with PEG and containing binary ionic liquids exhibits a room-temperature lithium ion conductivity of 0.52 mS/cm. On the other hand, APCN ultrafiltration (UF) membranes exhibit organic solvent-resistant behavior. The UF membrane obtained by interconnecting PVDF-g-PDMAEMA with telechelic PEG shows low protein fouling propensity, higher hydrophilicity, and water flux as compared to membranes prepared using XDC as the interconnecting agent. The significant effect of the covalent interconnection of the amphiphilic graft copolymers with telechelic PEG or XDC on the overall properties provides a good opportunity to modulate the properties and performance of APCN membranes.

Bottlebrush Amphiphilic Polymer Co-Networks

We report the synthesis of novel poly(ethylene glycol) and poly(dimethyl siloxane) (PEG and PDMS, respectively) bottlebrush amphiphilic polymer co-networks (B-APCNs) with high gel fractions by a grafting-through ring-opening metathesis polymerization. By varying the volume fraction of PEG (ϕPEG), we alter the crystallinity of the networks, achieving complete suppression of PEG crystallinity at ϕPEG=0.35. Furthermore, we show that the crystallinity of these networks can be tuned to alter their moduli. Through dynamic mechanical analysis, we show that the storage and loss moduli of networks with completely suppressed crystallinity (ϕPEG=0.35) behave similarly to a PDMS homopolymer bottlebrush network. These bottlebrush networks represent an unexplored architecture for the field of amphiphilic polymer co-networks.

Evolution of Supramolecular Systems Towards Next-Generation Biosensors

Supramolecular materials, which rely on dynamic non-covalent interactions, present a promising approach to advance the capabilities of currently available biosensors. The weak interactions between supramolecular monomers allow for adaptivity and responsiveness of supramolecular or self-assembling systems to external stimuli. In many cases, these characteristics improve the performance of recognition units, reporters, or signal transducers of biosensors. The facile methods for preparing supramolecular materials also allow for straightforward ways to combine them with other functional materials and create multicomponent sensors. To date, biosensors with supramolecular components are capable of not only detecting target analytes based on known ligand affinity or specific host-guest interactions, but can also be used for more complex structural detection such as chiral sensing. In this Review, we discuss the advancements in the area of biosensors, with a particular highlight on the designs of supramolecular materials employed in analytical applications over the years. We will first describe how different types of supramolecular components are currently used as recognition or reporter units for biosensors. The working mechanisms of detection and signal transduction by supramolecular systems will be presented, as well as the important hierarchical characteristics from the monomers to assemblies that contribute to selectivity and sensitivity. We will then examine how supramolecular materials are currently integrated in different types of biosensing platforms. Emerging trends and perspectives will be outlined, specifically for exploring new design and platforms that may bring supramolecular sensors a step closer towards practical use for multiplexed or differential sensing, higher throughput operations, real-time monitoring, reporting of biological function, as well as for environmental studies.

Forming amorphous calcium carbonate within hydrogels by enzyme-induced mineralization in the presence of N-(phosphonomethyl)glycine

Amorphous inorganic materials have a great potential in material science. Amorphous calcium carbonate (ACC) is a widely useable system, however, its stabilization often turns out to be difficult and the synthesis is mostly limited to precipitation in solution as nanoparticles. Stable ACC in bulk phases would create new composite materials. Previous work described the enzyme-induced mineralization of hydrogels with crystalline calcium carbonate by entrapping urease into a hydrogel and treating this with an aqueous mineralization solution containing urea und calcium chloride. Here, this method was modified using a variety of crystallization inhibitors attached to the hydrogel matrix or added to the surrounding mineralization solution. It was found that only N-(phosphonomethyl)glycine (PMGly) in solution completely inhibits the crystallization of ACC in the hydrogel matrix. The stability of the homogeneously precipitated ACC could be accounted to the combination of stabilizing effects of the additive and stabilization through confinement. The crystallization could be accelerated at higher temperatures up to 60 °C. Here, a combination of Mg ions and PMGly was required to stabilize ACC in the hydrogel. Variation of these two compounds can be used to control a number of different calcium carbonate morphologies within the hydrogel. While the ACC nanoparticles within the hydrogel are stable over weeks even in water, a calcite layer grows on the surface of the hydrogel, which might be used as self-hardening mechanism of a surface.

Solvent Effect on the Self-Assembly of a Thin Film Consisting of Y-Shaped Copolymer

The self-assembly of an amphiphilic Y-shaped copolymer consisting of two hydrophilic branches and one hydrophobic branch in a thin film is investigated under different conditions by virtue of mesoscopic computer modelling, accompanied by doping with a single solvent, doping with a binary solvent, and those solvent environments together with the introduction of confinement defined by various acting distances and influencing regions. A cylindrical micellar structure is maintained, as it is in the thin film with the doping of either 10% hydrophobic solvent or 10% hydrophilic solvent, whose structure consists of the hydrophobic core and hydrophilic shell. Attributed to the hydrophobicity/hydrophilia nature of the solvents, different solvents play an obvious role on the self-assembled structure, i.e., the hydrophobic solvent presents as a swelling effect, conversely, the hydrophilic solvent presents as a shrinking effect. Further, the synergistic effect of the binary solvents on the self-assembly produces the lowest values in both the average volumetric size and free energy density when the quantity of hydrophobic solvent and hydrophilic solvent is equivalent. Interestingly, the solvent effect becomes more pronounced under the existent of a confinement. When a lateral-oriented confinement is introduced, a periodically fluctuating change in the cylindrical size occurs in two near-wall regions, but the further addition of either hydrophobic or hydrophilic solvent can effectively eliminate such resulting hierarchical-sized cylinders and generate uniform small-sized cylinders. However, with the introduction of a horizontal-orientated confinement, the copolymers self-assemble into the spherical micellar structure. Moreover, the further addition of hydrophobic solvent leads to a decrease in the average size of micelles via coalescence mechanism, in contrast, the further addition of hydrophilic solvent causes an increase in the average size of micelles via splitting mechanism. These findings enrich our knowledge of the potential for the solvent effect on the self-assembly of amphiphilic copolymer system, and then provide theoretical supports on improving and regulating the mesoscopic structure of nanomaterials.

Transport-Limited Adsorption of Plasma Proteins on Bimodal Amphiphilic Polymer Co-Networks: Real-Time Studies by Spectroscopic Ellipsometry

Traditional hydrogels are commonly limited by poor mechanical properties and low oxygen permeability. Bimodal amphiphilic co-networks (β-APCNs) are a new class of materials that can overcome these limitations by combining hydrophilic and hydrophobic polymer chains within a network of co-continuous morphology. Applications that can benefit from these improved properties include therapeutic contact lenses, enzymatic catalysis supports, and immunoisolation membranes. The continuous hydrophobic phase could potentially increase the adsorption of plasma proteins in blood-contacting medical applications and compromise in vivo material performance, so it is critical to understand the surface characteristics of β-APCNs and adsorption of plasma proteins on β-APCNs. From real-time spectroscopic visible (Vis) ellipsometry measurements, plasma protein adsorption on β-APCNs is shown to be transport-limited. The adsorption of proteins on the β-APCNs is a multistep process with adsorption to the hydrophilic surface initially, followed by diffusion into the material to the internal hydrophilic/hydrophobic interfaces. Increasing the cross-linking of the PDMS phase reduced the protein intake by limiting the transport of large proteins. Moreover, the internalization of the proteins is confirmed by the difference between the surface-adsorbed protein layer determined from XPS and bulk thickness change from Vis ellipsometry, which can differ up to 20-fold. Desorption kinetics depend on the adsorption history with rapid desorption for slow adsorption rates (i.e., slow-diffusing proteins within the network), whereas proteins with fast adsorption kinetics do not readily desorb. This behavior can be directly related to the ability of the protein to spread or reorient, which affects the binding energy required to bind to the internal hydrophobic interfaces.

Mechanistic investigations of confinement effects on the self-assembly of symmetric amphiphilic copolymers in thin films

The self-assembly of a copolymer thin film, whose molecular structure is composed of one hydrophobic branch (denoted in green) and two hydrophilic branches (denoted in red), gives (a) cylindrical structure, (b) micellar structure, and (c) lamellar structure.

Disulfide bonds-containing amphiphilic conetworks with tunable reductive-cleavage

The disulfide bonds-containing amphiphilic conetworks were presented with tunable reduction-cleavage via click reaction of azide terminated poly(ε-caprolactone) and alkyne-terminated polyethylene glycol.

2,2′:6′,2′′-Terpyridine-functionalized redox-responsive hydrogels as a platform for multi responsive amphiphilic polymer membranes

Amphiphilic polymer co-networks were functionalized with spyropiran and terpyridine yielding multi-responsive membranes with switchable properties and potential applications in drug delivery and medical sensors.

Unexpected thermal decomposition behavior of poly(N-vinylimidazole)-l-poly(tetrahydrofuran) amphiphilic conetworks, a class of chemically forced blends

The underlying chemical processes of the unexpected thermal decomposition behavior of poly(N-vinylimidazole)-l-poly(tetrahydrofuran) amphiphilic conetworks were investigated by thermogravimetric analysis and thermogravimetry-mass spectrometry.

Versatile matrix for constructing enzyme-based biosensors

A versatile matrix was fabricated and utilized as a universal interface for the construction of enzyme-based biosensors. This matrix was formed on the gold electrode via combining self-assembled monolayer of 2,3-dimercaptosuccinic acid with gold nanoparticles. Gold nanoparticles were electrochemically deposited. Electrochemistry of three redox enzymes (catalase, glucose oxidase, and horseradish peroxidase) was investigated on such a matrix. The electrocatalytic monitoring of hydrogen peroxide and glucose was conducted on this matrix after being coated with those enzymes. On them the monitoring of hydrogen peroxide and glucose shows rapid response times, wide linear working ranges, low detection limits, and high enzymatic affinities. This matrix is thus a versatile and suitable platform to develop highly sensitive enzyme-based biosensors.

Urease-induced calcification of segmented polymer hydrogels - a step towards artificial biomineralization

Natural organic/inorganic composites, such as nacre, bones and teeth, are perfectly designed materials with exceptional mechanical properties. Numerous approaches have been taken to synthetically prepare such composites. The presented work describes a new way of mineralizing bulk materials on a large scale following the approach of bioinduced mineralization. To this end, a series of polymer conetworks with entrapped urease were prepared. After polymerization, the entrapped urease shows high enzymatic activity. The bioactive polymer conetworks were then treated with an aqueous mixture of urea and CaCl2. The urease-induced calcification indeed allows formation of carbonate crystals exclusively within the hydrogel even at room temperature. The influence of network composition, degree of cross-linking, immobilized urease concentration and temperature of calcification were investigated. By varying these parameters, spherical, monolithic clusters, as well as bar-like nanocrystals with different aspect ratios in spherical or dendritic arrays, are formed. The grown nanocrystals improve the stiffness of the starting material by up to 700-fold, provided that the microstructure shows a dense construction without pores and strong interaction between crystals and network. The process has the potential to generate a new class of hybrid materials that would be available on the macroscopic scale for use in lightweight design and medicine.