Fabrication and Characterization of Submicrometer- and Nanometer-Sized Double-Barrel Pipets

Electrochemiluminescence Based on a Dual Carbon Ultramicroelectrode with Confined Steady-State Annihilation

Developing novel microelectronic devices for electrochemical measurements and electrochemiluminescence (ECL) study is of great importance. Herein, we fabricated a submicrometer-sized dual carbon electrode (DCE) and investigated its annihilation ECL behavior under steady-state conditions for the first time. The oxidation and reduction of the model luminophore, [Ru(bpy)₃]²⁺, occurred separately at the two sides of the DCE, and the electrogenerated ions then diffused to the gap between the two electrodes to generate the excited-state intermediate [Ru(bpy)₃]^2+* and ECL emission. Compared with other types of two-electrode systems, the prepared DCE possesses a smaller total size and an ultrasmall interelectrode distance of 60 nm or less, which could result in a shorter diffusion time and an amplified ECL signal without the purification of the solvent and supporting electrolytes. On the basis of the constructed ECL microscopic platform, we successfully obtained a stable and confined ECL signal in the vicinity of the electrode tip. Furthermore, a two-dimensional finite element method simulation of this model system was performed to quantitively analyze the concentration profiles of the electrogenerated species around the tip of the DCE and predict the concentrations of [Ru(bpy)₃]^2+* with various gap distances. The simulation results also proved that the higher concentrations of [Ru(bpy)₃]^2+* could be achieved with a smaller distance with a possible amplification factor of 6 (compared with the concentration when the gap distance is greater than 300 nm). This work provides an experimental model for further improvement of ECL efficiency and broadens the availability for annihilation ECL applications in small confined spaces.

Ionic Current Behaviors of Dual Nano- and Micropipettes

Ionic current rectification (ICR) phenomena within dual glass pipettes are investigated for the first time. We demonstrate that the ionic flow presents different behaviors in dual nano- and micropipettes when the two channels are filled with the same electrolyte KCl and hung in air. Bare dual nanopipettes cannot rectify the ionic current because of their geometric symmetry, but the ICR can be directly observed based on bare dual micropipettes. The phenomena based on dual micropipettes could be explained by the simulation of the Poisson-Nernst-Plank equation. After modification with different approaches, the dual nanopipettes have asymmetric charge patterns and show various ICR behaviors. They have been successfully employed to fabricate various nanodevices, such as ionic diodes and bipolar junction transistors. Due to the simple and fast fabrication with high reproducibility, these dual pipettes can provide a novel platform for controlling ionic flow in nano- and microfluidics, fabrication of novel nanodevices, and detection of biomolecules.

Fabrication and Use of Nanopipettes in Chemical Analysis

This review summarizes progress in the fabrication, modification, characterization, and applications of nanopipettes since 2010. A brief history of nanopipettes is introduced, and the details of fabrication, modification, and characterization of nanopipettes are provided. Applications of nanopipettes in chemical analysis are the focus in several cases, including recent progress in imaging; in the study of single molecules, single nanoparticles, and single cells; in fundamental investigations of charge transfer (ion and electron) reactions at liquid/liquid interfaces; and as hyphenated techniques combined with other methods to study the mechanisms of complicated electrochemical reactions and to conduct bioanalysis.

Fused Silica Microcapillaries Used for a Simple Miniaturization of the Electrified Liquid-Liquid Interface

Short pieces of fused silica capillary tubing were used to support an electrified liquid–liquid interface. A methyl deactivated silica capillary having a diameter of 25 μm was filled with 1,2-dichloroethane solution and served as the organic part of the liquid–liquid interface. A nondeactivated fused silica capillary having a diameter of 5, 10, or 25 μm was filled with an aqueous HCl solution and served as the aqueous part of the electrochemical cell. For the latter, silanization of the capillary interior with chlorotrimethylsilane allowed for a successful phase reversal. All capillaries were characterized by ion transfer voltammetry using tetramethylammonium cation as a model ion. This simple, fast, and low-cost miniaturization technique was successfully applied for detection of the antibiotic ofloxacin.

Electroanalytical Ventures at Nanoscale Interfaces Between Immiscible Liquids

Ion transfer at the interface between immiscible electrolyte solutions offers many benefits to analytical chemistry, including the ability to detect nonredox active ionized analytes, to detect ions whose redox electrochemistry is accompanied by complications, and to separate ions based on electrocontrolled partition. Nanoscale miniaturization of such interfaces brings the benefits of enhanced mass transport, which in turn leads to improved analytical performance in areas such as sensitivity and limits of detection. This review discusses the development of such nanoscale interfaces between immiscible liquids and examines the analytical advances that have been made to date, including prospects for trace detection of ion concentrations.