Sequential Determination of Two Proteins by Temperature-Triggered Homogeneous Chemiluminescent Immunoassay

Recent Advances in Electrochemical Sensing of Hydrogen Peroxide (H2O2) Released from Cancer Cells

Cancer is by far the most common cause of death worldwide. There are more than 200 types of cancer known hitherto depending upon the origin and type. Early diagnosis of cancer provides better disease prognosis and the best chance for a cure. This fact prompts world-leading scientists and clinicians to develop techniques for the early detection of cancer. Thus, less morbidity and lower mortality rates are envisioned. The latest advancements in the diagnosis of cancer utilizing nanotechnology have manifested encouraging results. Cancerous cells are well known for their substantial amounts of hydrogen peroxide (H₂O₂). The common methods for the detection of H₂O₂ include colorimetry, titration, chromatography, spectrophotometry, fluorimetry, and chemiluminescence. These methods commonly lack selectivity, sensitivity, and reproducibility and have prolonged analytical time. New biosensors are reported to circumvent these obstacles. The production of detectable amounts of H₂O₂ by cancerous cells has promoted the use of bio- and electrochemical sensors because of their high sensitivity, selectivity, robustness, and miniaturized point-of-care cancer diagnostics. Thus, this review will emphasize the principles, analytical parameters, advantages, and disadvantages of the latest electrochemical biosensors in the detection of H₂O₂. It will provide a summary of the latest technological advancements of biosensors based on potentiometric, impedimetric, amperometric, and voltammetric H₂O₂ detection. Moreover, it will critically describe the classification of biosensors based on the material, nature, conjugation, and carbon-nanocomposite electrodes for rapid and effective detection of H₂O₂, which can be useful in the early detection of cancerous cells.

Immunoassay technology: Research progress in microcystin-LR detection in water samples

Increasing global warming and eutrophication have led to frequent outbreaks of cyanobacteria blooms in freshwater. Cyanobacteria blooms cause the death of aquatic and terrestrial organisms and have attracted considerable attention since the 19th century. Microcystin-LR (MC-LR) is one of the most typical cyanobacterial toxins. Therefore, the fast, sensitive, and accurate determination of MC-LR plays an important role in the health of humans and animals. Immunoassay refers to a method that uses the principle of immunology to determine the content of the tested substance in a sample using the tested substance as an antigen or antibody. In analytical applications, the immunoassay technology could use the specific recognition of antibodies for MC-LR detection. In this review, we firstly highlight the immunoassay detection of MC-LR over the past two decades, including classical enzyme-link immunosorbent assay (ELISA), modern immunoassay with optical signal, and modern immunoassay with electrical signal. Among these detection methods, the water environment was used as the main detection system. The advantages and disadvantages of the different detection methods were compared and analyzed, and the principles and applications of immunoassays in water samples were elaborated. Furthermore, the current challenges and developmental trends in immunoassay were systematically introduced to enhance MC-LR detection performance, and some critical points were given to deal with current challenges. This review provides novel insight into MC-LR detection based on immunoassay method.

Self-Assembly of Antigen Proteins into Nanowires Greatly Enhances the Binding Affinity for High-Efficiency Target Capture

High-efficiency target capture is an essential prerequisite for sensitive immunoassays. However, the current available immunoassay approaches are subject to deficient binding affinities between predator-prey molecules that greatly restrict the target capture efficiency and immunoassay sensitivity. Herein, we present a new strategy through the self-assembly of antigen proteins into nanowires to enhance the binding affinity between an antigen and antibody. Through the genetic fusion of antigen proteins (e.g., HIV p24) with the yeast amyloid protein Sup35 self-assembly domain, specific antigen nanowires (Ag nanowires) were constructed and demonstrated a remarkable enhancement in binding affinity compared with that of the monomeric antigen molecule. The Ag nanowires were further combined with magnetic beads to form a 3D magnetic probe based on a seed-induced self-assembly strategy. Taking advantage of both the strong binding affinity and the rapid magnetic separation and enrichment capacity, the specific 3D magnetic probe achieved a 100-fold improvement in detection sensitivity within a significantly shorter period of 20 min over that of the conventional enzyme-linked immunosorbent assay method.

Dual-Functional Nanoparticles for In Situ Sequential Detection and Imaging of ATP and H2 O2

Within a complex biological sample, the in situ sequential detection of multiple molecules without any interference is greatly desirable. Dual-functional nanoparticles are constructed, with the enzyme-based core-shell structures, for the in situ sequential detection of ATP and H2 O2 within the same biological system.

Nitrogen-doped graphene-chitosan matrix based efficient chemiluminescent immunosensor for detection of chicken interleukin-4

Chicken interleukin-4 (ChIL-4), which is released by activated type 2 helper (Th2) cells following their stimulation in vitro, is an important indicator for the study of cell-mediated immunity in chickens after infection or vaccination. In this work, the first ChIL-4 chemiluminescent (CL) immunosensor was developed via the immobilization of monoclonal ChIL-4 antibodies on a nitrogen-doped graphene (NG)-chitosan nanocomposite matrix. NG nanosheets were used for the first time in the CL immunoassay to provide a biocompatible microenvironment for the immobilized capture antibody. The ChIL-4 immunosensor was characterized systematically. The proposed immunosensor displayed a wide linear range from 0.05 to 70ngmL^-1 and a low detection limit of 0.02ngmL^-1 at a signal-to-noise ratio of 3. Compared to traditional assay methods, this system was more flexible, simple, rapid, and sensitive. Moreover, this CL immunoassay system had an excellent detection and fabrication reproducibility, a high specificity, an acceptable accuracy, and a high stability. This work enables the specific detection of ChIL-4 and the further study of its role in the immune responses of poultry.

Employment of 4-(1,2,4-triazol-1-yl)phenol as a signal enhancer of the chemiluminescent luminol-H2O2-horseradish peroxidase reaction for detection of hepatitis C virus in real samples

Highly sensitive detection of hepatitis C virus (HCV) in serum is a key method for diagnosing and classifying the extent of HCV infection. In this study, a p-phenol derivative, 4-(1,2,4-triazol-1-yl)phenol (4-TRP), was employed as an efficient enhancer of the luminol-hydrogen peroxide (H2O2)-horseradish peroxidase (HRP) chemiluminescence (CL) system for detection of HCV. Compared with a traditional enhancer, 4-TRP strongly enhanced CL intensity with the effect of prolonging and stabilizing light emission. The developed CL system was applied to detecting HCV core antigen (HCV-cAg) using a sandwich structure inside microwells. Our experimental results showed that there was good linear relationship between CL intensity and HCV-cAg concentration in the 0.6-3.6 pg/mL range (R = 0.99). The intra- and inter-assay coefficients of variation were 4.5-5.8% and 5.0-7.3%, respectively. In addition, sensitive determination of HCV-cAg in serum samples using the luminol-H2O2-HRP-4-TRP CL system was also feasible in clinical settings.

A new label-free strategy for a highly efficient chemiluminescence immunoassay

A new label-free chemiluminescence (CL) immunoassay method which is based on the co-immobilization of a capture antibody and horseradish peroxidase (HRP) on the Au nanoparticle–chitosan composite interface is proposed for the cheap, fast and convenient detection of proteins.

Multiplexed detection of two proteins by a reaction kinetics-resolved chemiluminescence immunoassay strategy

A multiplexed immunoassay method was proposed for the sequential detection of two proteins based on a novel chemiluminescence reaction kinetics-resolved strategy.

Magnetic bead-based colorimetric immunoassay for aflatoxin B1 using gold nanoparticles

A competitive colorimetric immunoassay for the detection of aflatoxin B1 (AFB) has been established using biofunctionalized magnetic beads (MBs) and gold nanoparticles (GNPs). Aflatoxin B1-bovine serum albumin conjugates (AFB-BSA) modified MBs were employed as capture probe, which could specifically bind with GNP-labeled anti-AFB antibodies through immunoreaction, while such specific binding was competitively inhibited by the addition of AFB. After magnetic separation, the supernatant solution containing unbound GNPs was directly tested by UV-Vis spectroscopy. The absorption intensity was directly proportional to the AFB concentration. The influence of GNP size, incubation time and pH was investigated in detail. After optimization, the developed method could detect AFB in a linear range from 20 to 800 ng/L, with the limit of detection at 12 ng/L. The recoveries for spiked maize samples ranged from 92.8% to 122.0%. The proposed immunoassay provides a promising approach for simple, rapid, specific and cost-effective detection of toxins in the field of food safety.

Indole-3-acetic acid biosensor based on G-rich DNA labeled AuNPs as chemiluminescence probe coupling the DNA signal amplification

A highly sensitive chemiluminescence (CL) method for detection of phytohormone indole-3-acetic acid (IAA) was developed by using G-rich DNA labeled gold nanoparticles (AuNPs) as CL probe coupling the DNA signal amplification technology. The IAA antibody was immobilized on carboxyl terminated magnetic beads (MBs). In the presence of IAA, antibody labeled AuNPs were captured by antibody functionalized MBs. The DNA on AuNPs is released by a ligand exchange process induced by the addition of DTT. The released DNA is then acted as the linker and hybridized with the capture DNA on MBs and probe DNA on AuNPs CL probe. The CL signal is obtained via the instantaneous derivatization reaction between a specific CL reagent, 3,4,5-trimethoxyl-phenylglyoxal (TMPG), and the G-rich DNA on AuNPs CL probe. IAA can be detected in the concentration range from 0.02 ng/mL to 30 ng/mL, and the limit of detection is 0.01 ng/mL.

Instantaneous derivatization technology for the simultaneous and homogeneous detection of multiple double-stranded PCR amplicons

Herein we report on the development of instantaneous derivatization technology for the homogeneous and simultaneous detection of multiple PCR amplicons specific to the Hepatitis B Virus (HBV) by using three carriers: magnetic beads, polystyrene beads, and thermo-sensitive poly-N-isopropylacrylamide (PNIP). Briefly, PCR amplicons are labeled with digoxin, biotin or FITC via the modified up-stream primers respectively. After PCR amplification, the immunoreactions occur between a mixture of three target PCR amplicons and three modified carriers with anti-digoxin antibody, streptavidin or anti-FITC antibody in a single vessel, and then each carrier is separated from the others under different conditions based on their physio-chemical attributes. And then direct CL detection proceeds via the instantaneous derivatization reaction between intrinsic guanine nucleobases and 3,4,5-trimethoxylphenylglyoxal (TMPG). This new protocol directly measures the double-stranded DNA and therefore does not require a denaturing step, thus offering an enhanced sensitivity due to the absence of competitive hybridization, i.e., the detection limit had a 20-fold improvement on the conventional PCR measurement. Additionally, by comparison of previous guanine based detection formats, this protocol is easy to be used for the detection of any guanine containing targets without the use of guanine-free or inosine-substituted capture probes. Overall, the proposed technique takes the advantages of sensitivity, high-speed and cost-effectivity, which provides a promising alternative for the analysis of multiple PCR targets in a variety of clinical, environmental, and biodefense fields.

Multianalyte immunoassay chip for detection of tumor markers by chemiluminescent and colorimetric methods

Most cancers developed an elevation of the level of at least two markers associated with their incidence. Simultaneous detection of multi-tumor markers associated with a particular type of cancer plays an important role in cancer diagnostic. Here, a multianalyte immunoassay chip for simple and sensitive detection of tumor markers with chemiluminescent and colorimetric methods was proposed, in which carcinoembryonic antigen (CEA) and carbohydrate antigen (CA19-9) that associated with colorectal cancer were detected as model. The immunoassay chip was fabricated by co-immobilization of CEA/CA19-9 antibody on a glass slide with γ-glycidoxypropyltrimethoxysilane as linkage. Through sandwiched immunoreactions, CEA, CA19-9, and their corresponding enzyme tracers, alkaline phosphatase-labeled anti-CEA and horseradish peroxidase-labeled anti-CA19-9, were introduced on the chip. Then, they were sequentially detected by chemiluminescent method in the range of 0.5-80 μg/L and 0.5-80 kU/L with the detection limits of 0.41 μg/L and 0.36 kU/L at 3σ for CEA and CA19-9, respectively. They could also be detected by colorimetric method in the range of 1-200 μg/L and 5-200 kU/L with the detection limits of 0.25 μg/L and 1.25 kU/L at 3σ for CEA and CA19-9, respectively. All these results demonstrated that the present work provided a promising analytical method for tumor markers' analysis with the advantages of simple analytical procedure, small sample volume and lower cost, which made the proposed method potential for high-throughput detection.

Highly sensitive chemiluminescence technology for protein detection using aptamer-based rolling circle amplification platform

A robust, selective and highly sensitive chemiluminescent (CL) platform for protein assay was presented in this paper. This novel CL approach utilized rolling circle amplification (RCA) as a signal enhancement technique and the 96-well plate as the immobilization and separation carrier. Typically, the antibody immobilized on the surface of 96-well plate was sandwiched with the protein target and the aptamer–primer sequence. This aptamer–primer sequence was then employed as the primer of RCA. Based on this design, a number of the biotinylated probes and streptavidin–horseradish peroxidase (SA–HRP) were captured on the plate, and the CL signal was amplified. In summary, our results demonstrated a robust biosensor with a detection limit of 10 fM that is easy to be established and utilized, and devoid of light source. Therefore, this new technique will broaden the perspective for future development of DNA-based biosensors for the detection of other protein biomarkers related to clinical diseases, by taking advantages of high sensitivity and selectivity.

Fe3O4 nanoparticles-enhanced SPR sensing for ultrasensitive sandwich bio-assay

Magnetic nanoparticles (MNPs) have been receiving increasing attention because of its great potentials in bioseparation. However, the separation products are difficult to be detected by general method due to their extremely small size. Here, we demonstrate that MNPs can greatly enhance the signal of surface plasmon resonance spectroscopy (SPR). Features of MNPs-aptamer conjugates as a powerful amplification reagent for ultrasensitive immunoassay are reported in this work for the first time. In order to evaluate the sensing ability of MNPs-aptamer conjugates as an amplification reagent, a sandwich SPR sensor is constructed by using thrombin as model analyte. Thrombin, captured by immobilized anti-thrombin aptamer on SPR gold film, is sensitively detected by SPR spectroscopy with a lowest detection limit of 0.017 nM after MNPs-aptamer conjugates is used as amplification reagent. At the same time, the excellent selectivity of the present biosensor is also confirmed by using three kinds of proteins (BSA, human IgM and human IgE) as controls. These results confirm that MNPs is a powerful sandwich element and an excellent amplification reagent for SPR based sandwich immunoassay and SPR has a great potential for the detection of MNPs-based bioseparation products.

DNA aptamer folding on magnetic beads for sequential detection of adenosine and cocaine by substrate-resolved chemiluminescence technology

We have developed a new aptamer-based chemiluminescence (CL) biosensing platform for the sequential detection of two small molecules as exemplified by adenosine and cocaine. Each biosensing platform comprises NH(2)-functionalized capture DNA immobilized on magnetic beads; this can hybridize with one end of the aptamer. A corresponding reporter DNA probe labeled with either digoxigenin or biotin on its 5'-terminus recognizes the other end of the aptamer. The target compounds adenosine or cocaine act as specific competitors to aptamer-reporter DNA binding, and the corresponding aptamers preferentially form target-aptamer complexes. This results in detachment of the reporter DNA probe from the magnetic beads, with more target molecules resulting in less reporter DNA probe remaining on the beads. Those left are sequentially detected by using substrate-resolved anti-digoxigenin-alkaline phosphatase and streptavidin-horseradish peroxidase. Experimental results confirm that this CL immunosensing platform has good sensitivity with detection limits of 5.2 x 10(-9) M and 3.2 x 10(-9) M for adenosine and cocaine, respectively. Because it is straightforward to adapt this strategy to detect a spectrum of small molecules by using different aptamers, this method may offer a new direction in designing high-performance CL aptasensors for sensitive and sequential determination of a limited number of small molecules.

Chemiluminescence platforms in immunoassay and DNA analyses

Chemiluminescent (CL) detection techniques for DNA assays and immunoassays have become very popular in recent years. This review discusses recent advances in those CL assays that have occurred over the last few years. In the monoplex assay section, different classes of CL labels including nanoparticle, DNAzyme, acridinium ester, enzyme and luminol-based CL assays are reviewed concerning the detection of DNAs and proteins. In the multiplex assay section, both spatial resolution and substrate zone-resolved techniques are discussed.

Disposable magnetic DNA sensors for the determination at the attomolar level of a specific enterobacteriaceae family gene

Disposable magnetic DNA sensors using an enzyme-amplified strategy for the specific detection of a gene related to the Enterobacteriaceae bacterial family, based on the coupling of streptavidin-peroxidase to biotinylated lacZ gene target sequences, has been developed. A biotinylated 25-mer capture probe was attached to streptavidin-modified magnetic beads and hybridization with the biotinylated target was allowed to proceed. Then, a streptavidin-peroxidase polymer was attached to the biotinylated target, and the resulting modified magnetic beads were captured by a magnetic field on the surface of tetrathiafulvalene (TTF) modified gold screen-printed electrodes (Au/SPEs). The amperometric response obtained at -0.15 V after the addition of hydrogen peroxide was used to detect the hybridization process. In order to improve the sensitivity of the determination and reduce the assay time, different variables of the assay protocol were optimized. A low detection limit (5.7 fmol) with good stability (RSD = 7.1%, n = 10) was obtained. The DNA nonspecific adsorption at the magnetic beads was negligible, the obtained results thus demonstrating the possibility to detect the hybridization event with great specificity and sensitivity. The developed method was used for the analysis of Escherichia coli DNA fragments (326 bases) in polymerase chain reaction (PCR) amplicons extracted from a cell culture. As low as 2.5 aM asymmetric PCR product could be detected with the developed methodology.

Magnetic Control of an Electrochemical Microfluidic Device with an Arrayed Immunosensor for Simultaneous Multiple Immunoassays

Background: Methods based on magnetic bead probes have been developed for immunoassay, but most involve complicated labeling or stripping procedures and are unsuitable for routine use.

Methods: We synthesized magnet core/shell NiFe2O4/SiO2 nanoparticles and fabricated an electrochemical magnetic controlled microfluidic device for the detection of 4 tumor markers. The immunoassay system consisted of 5 working electrodes and an Ag/AgCl reference electrode integrated on a glass substrate. Each working electrode contained a different antibody immobilized on the NiFe2O4/SiO2 nanoparticle surface and was capable of measuring a specific tumor marker using noncompetitive electrochemical immunoassay.

Results: Under optimal conditions, the multiplex immunoassay enabled the simultaneous detection of 4 tumor markers. The sensor detection limit was <0.5 μg/L (or <0.5 kunits/L) for most analytes. Intra- and interassay imprecisions (CVs) were <4.5% and 8.7% for analyte concentrations >5 μg/L (or >5 kunits/L), respectively. No nonspecific adsorption was observed during a series of procedures to detect target proteins, and electrochemical cross-talk (CV) between neighboring sites was <10%.

Conclusion: This immunoassay system offers promise for label-free, rapid, simple, cost-effective analysis of biological samples. Importantly, the chip-based immunosensor could be suitable for use in the mass production of miniaturized lab-on-a-chip devices and open new opportunities for protein diagnostics and biosecurity.