Surface-Enhanced Raman Scattering-Based Nanoprobe for High-Resolution, Non-Scanning Chemical Imaging

Detection of Silver Nanoparticles in Seawater Using Surface-Enhanced Raman Scattering

Nanomaterials significantly contribute to the development of new solutions to improve consumer products properties. Silver nanoparticles (AgNPs) are one of the most used, and as human exposure to such NPs increases, there is a growing need for analytical methods to identify and quantify nanoparticles present in the environment. Here we designed a detection strategy for AgNPs in seawater using surface-enhanced Raman Scattering (SERS). Three commercial AgNPs coated with polyvinylpyrrolidone (PVP) were used to determine the relative impact of size (PVP-15nmAgNPs and PVP-100nmAgNPs) and aggregation degree (predefined Ag aggregates, PVP-50-80nmAgNPs) on the SERS-based detection method. The study of colloidal stability and dissolution of selected AgNPs into seawater was carried out by dynamic light scattering and UV-vis spectroscopy. We showed that PVP-15nmAgNPs and PVP-100nmAgNPs remained colloidally stable, while PVP-50-80nmAgNPs formed bigger aggregates. We demonstrated that the SERS-based method developed here have the capacity to detect and quantify single and aggregates of AgNPs in seawater. The size had almost no effect on the detection limit (2.15 ± 1.22 mg/L for PVP-15nmAgNPs vs. 1.51 ± 0.71 mg/L for PVP-100nmAgNPs), while aggregation caused an increase of 2.9-fold (6.08 ± 1.21 mg/L). Our results demonstrate the importance of understanding NPs transformation in seawater since this can influence the detection method performance.

Inverse Molecular Sentinel-Integrated Fiberoptic Sensor for Direct and in Situ Detection of miRNA Targets

Molecular advances have been made in analysis systems for a wide variety of applications ranging from biodiagnostics, biosafety, bioengineering, and biofuel research applications. There are, however, limited practical tools necessary for in situ and accurate detection of nucleic acid targets during field work. New technology is needed to translate these molecular advances from laboratory settings into the real-life practical monitoring realm. The exquisite characteristics (e.g., sensitivity and adaptability) of plasmonic nanosensors have made them attractive candidates for field-ready sensing applications. Herein, we have developed a fiber-based plasmonic sensor capable of direct detection (i.e., no washing steps required) of nucleic acid targets, which can be detected simply by immerging the sensor in the sample solution. This sensor is composed of an optical fiber that is decorated with plasmonic nanoprobes based on silver-coated gold nanostars (AuNS@Ag) to detect target nucleic acids using the surface-enhanced Raman scattering (SERS) sensing mechanism of nanoprobes referred to as inverse molecular sentinels (iMS). These fiber-optrodes can be reused for several detection-regeneration cycles (>6). The usefulness and applicability of the iMS fiber-sensors was tested by detecting target miRNA in extracts from leaves of plants that were induced to have different expression levels of miRNA targets. These fiber-optrodes enable direct detection of miRNA in plant tissue extract without the need for complex assays by simply immersing the fiber in the sample solution. The results indicate the fiber-based sensors developed herein have the potential to be a powerful tool for field and in situ analysis of nucleic acid samples.

Surface regeneration and signal increase in surface-enhanced Raman scattering substrates

Regenerated surface-enhanced Raman scattering (SERS) substrates allow users the ability to not only reuse sensing surfaces, but also tailor them to the sensing application needs (wavelength of the available laser, plasmon band matching). In this review, we discuss the development of SERS substrates for response to emerging threats and some of our collaborative efforts to improve on the use of commercially available substrate surfaces. Thus, we are able to extend the use of these substrates to broader Army needs (like emerging threat response).

Long-Standing Stability of Silver Nanorod Array Substrates Functionalized Using a Series of Thiols for a SERS-Based Sensing Application

Silver nanorod (AgNR) array substrates were fabricated using an oblique angle thermal evaporation technique; their long-term stability, surface uniformity and reproducibility, which are primary requirements for their widespread realistic application and commercialization, were assessed using surface-enhanced Raman scattering (SERS) spectroscopy. The nanorod surfaces were functionalized using a series of organic thiols, which range from hydrophilic to hydrophobic, to mimic various conditions that often arise during detection of hydrophilic/phobic analytes in a realistic application field. A group of these functionalized substrates was stored in ambient laboratory atmosphere; another in light minimized, moisture-free vacuum; while another was stowed carefully and neatly in water to mimic realistic conditions. The effects of these storing conditions were studied. A surfactant was added to the water to maintain consistent surface wetting in the third group. SERS spectra of nanorod substrates prior to functionalization were also recorded to investigate the effect of adventitious carbonaceous contaminants. A meticulous systematic study on the reproducibility of SERS signals was carried out: spot-to-spot, substrate-to-substrate, batch-to-batch, day-to-day. The relative standard deviation (RSD) shown by the SERS signals acquired from various spots of a single substrate was less than 3%, which is very similar to the only account reported so far, in which RSD is reported as 2%. The wetting behavior of these thiol functionalized AgNR substrates are investigated using static contact angle measurements. The functionalized substrates have exhibited excellent long-standing stability over a period of six months when stored appropriately; hence, they are highly suitable for mass production towards realistic application.

Recent achievements in colorectal cancer diagnostic and therapy by the use of nanoparticles

Colorectal cancer is a major public health issue, being the third most common cancer in men and the second in women. It is one of the leading causes of cancer deaths. Nanomedicine is an emerging field of interest, many of its aspects being linked to cancer research. Chemotherapy has a well-established role in colorectal cancer management, unfortunately being limited by inability to have a selective distribution, by multidrug resistance and adverse effects. Researches carried out in recent years about nanotechnologies aimed, among others, to resolve the issues mentioned above. Targeted and localized delivery of the chemotherapeutic drugs, using nanoparticles, with selective destruction of cancerous cells would minimize the toxicity on healthy tissues. Also, the use of nanomaterials as contrast agent could improve sensitivity and specificity of diagnosis. The purpose of this review is to highlight the recent achievements of cancer research by use of nanomaterials, in the idea of finding the ideal composite, capable to simultaneous diagnostic and treat cancer.

Silver@graphene oxide nanocomposite-based optical sensor platform for biomolecules

A silver incorporated graphene oxide nanocomposite was prepared and used for the detection of biomolecules using an absorbance based optical sensing method.

Functionalization of optical nanotip arrays with an electrochemical microcantilever for multiplexed DNA detection

Optical nanotip arrays fabricated on etched fiber bundles were functionalized with DNA spots. Such unconventional substrates (3D and non-planar) are difficult to pattern with standard microfabrication techniques but, using an electrochemical cantilever, up to 400 spots were electrodeposited on the nanostructured optical surface in 5 min. This approach allows each spot to be addressed individually and multiplexed fluorescence detection is demonstrated. Finally, remote fluorescence detection was performed by imaging through the optical fiber bundle itself after hybridisation with the complementary sequence.

Correlated imaging--a grand challenge in chemical analysis

Correlated chemical imaging is an emerging strategy for acquisition of images by combining information from multiplexed measurement platforms to track, visualize, and interpret in situ changes in the structure, organization, and activities of interesting chemical systems, frequently spanning multiple decades in space and time. Acquiring and correlating information from complementary imaging experiments has the potential to expose complex chemical behavior in ways that are simply not available from single methods applied in isolation, thereby greatly amplifying the information gathering power of imaging experiments. However, in order to correlate image information across platforms, a number of issues must be addressed. First, signals are obtained from disparate experiments with fundamentally different figures of merit, including pixel size, spatial resolution, dynamic range, and acquisition rates. In addition, images are often acquired on different instruments in different locations, so the sample must be registered spatially so that the same area of the sample landscape is addressed. The signals acquired must be correlated in both spatial and temporal domains, and the resulting information has to be presented in a way that is readily understood. These requirements pose special challenges for image cross-correlation that go well beyond those posed in single technique imaging approaches. The special opportunities and challenges that attend correlated imaging are explored by specific reference to correlated mass spectrometric and Raman imaging, a topic of substantial and growing interest.

Sensitive cylindrical SERS substrate array for rapid microanalysis of nucleobases

In this work, a cylindrical-substrate array for surface-enhanced Raman scattering (SERS) measurements was developed to enable analysis of nucleobases in a few microliters of liquid. To eliminate uncertainties associated with SERS detection of aqueous samples, a new type of cylindrical SERS substrate was designed to confine the aqueous sample at the tip of the SERS probe. Poly(methyl methacrylate) (PMMA) optical fibers in a series of different diameters were used as the basic substrate. A solution of poly(vinylidene fluoride)/dimethylformamide (PVDF/DMF) was used to coat the tip of each fiber to increase the surface roughness and facilitate adsorption of silver nanoparticles (AgNPs) for enhancing Raman signals. A chemical reduction method was used to form AgNPs in and on the PVDF coating layer. The reagents and reaction conditions were systematically examined with the aim of estimating the optimum parameters. Unlike the spreading of aqueous sample on most SERS substrates, particularly flat ones, the new SERS substrates showed enough hydrophobicity to restrict aqueous sample to the tip area, thus enabling quantitative analysis. The required volume of sample could be as low as 1 μL with no need for a drying step in the procedure. By aligning the cylindrical SERS substrates into a solid holder, an array of cylindrical substrates was produced for mass analysis of aqueous samples. This new substrate improves both reproducibility and sensitivity for detection in aqueous samples. The enhancement factor approaches 7 orders in magnitude with a relative standard error close to 8%. Using the optimized conditions, nucleobases of adenine, cytosine, thymine, and uracil could be detected with limits approaching a few hundreds nanomolar in only a few microliters of solution.

Highly Sensitive Filter Paper Substrate for SERS Trace Explosives Detection

We report on a novel and extremely low-cost surface-enhanced Raman spectroscopy (SERS) substrate fabricated depositing gold nanoparticles on common lab filter paper using thermal inkjet technology. The paper-based substrate combines all advantages of other plasmonic structures fabricated by more elaborate techniques with the dynamic flexibility given by the inherent nature of the paper for an efficient sample collection, robustness, and stability. We describe the fabrication, characterization, and SERS activity of our substrate using 2,4,6-trinitrotoluene, 2,4-dinitrotoluene, and 1,3,5-trinitrobenzene as analytes. The paper-based SERS substrates presented a high sensitivity and excellent reproducibility for analytes employed, demonstrating a direct application in forensic science and homeland security.

Surface-enhanced Raman scattering (SERS) optrodes for multiplexed on-chip sensing of nile blue A and oxazine 720

The fabrication and on-chip integration of surface-enhanced Raman scattering (SERS) optrodes are presented. In the optrode configuration, both the laser excitation and the back-scattered Raman signal are transmitted through the same optical fiber. The SERS-active component of the optrode was fabricated through the self-assembly of silver nanoparticles on the tip of optical fibers. The application of SERS optrodes to detect dyes in aqueous solution indicated a limit of quantification below 1 nM, using nile blue A as a molecular probe. Using the optrode-integrated microfluidic chip, it was possible to detect several different dyes from solutions sequentially injected into the same channel. This approach for sequential detection of different analytes is applicable to monitoring on-chip chemical processes. The narrow bandwidth of the vibrational information generated by SERS allowed solutions of different compositions of two chemically similar dyes to be distinguished using a dilution microfluidic chip. These results demonstrate the advantages of the SERS-optrode for microfluidics applications by illustrating the potential of this vibrational method to quantify components in a mixture.

Surface-Enhanced Raman Scattering as an Emerging Characterization and Detection Technique

While surface-enhanced Raman spectroscopy (SERS) has been attracting a continuously increasing interest of scientific community since its discovery, it has enjoyed a particularly rapid growth in the last decade. Most notable recent advances in SERS include novel technological approaches to SERS substrates and innovative applications of SERS in medicine and molecular biology. While a number of excellent reviews devoted to SERS appeared in the literature over the last two decades, we will focus this paper more specifically on several promising trends that have been highlighted less frequently. In particular, we will briefly overview strategies in designing and fabricating SERS substrates using deterministic patterning and then cover most recent biological applications of SERS.

Applications of Self-Assembled Monolayers in Surface-Enhanced Raman Scattering

The increasing applications of surface-enhanced Raman scattering (SERS) has led to the development of various SERS-active platforms (SERS substrates) for SERS measurement. This work reviews the current optimization techniques available for improving the performance of some of these SERS substrates. The work particularly identifies self-assembled-monolayer- (SAM-) based substrate modification for optimum SERS activity and wider applications. An overview of SERS, SAM, and studies involving SAM-modified substrates is highlighted. The focus of the paper then shifts to the use of SAMs to improve analytical applications of SERS substrates by addressing issues including long-term stability, selectivity, reproducibility, and functionalization, and so forth. The paper elaborates on the use of SAMs to achieve optimum SERS enhancement. Specific examples are based on novel multilayered SERS substrates developed in the author’s laboratory where SAMs have been demonstrated as excellent dielectric spacers for improving SERS enhancement more than 20-fold relative to conventional single layer SERS substrates. Such substrate optimization can significantly improve the sensitivity of the SERS method for analyte detection.

Design and Implementation of Noble Metal Nanoparticle Cluster Arrays for Plasmon Enhanced Biosensing

Nanoparticle Cluster Arrays (NCAs) are a class of electromagnetic materials that comprise chemically defined nanoparticles assembled into clusters of defined size in an extended deterministic arrangement. NCAs are fabricated through integration of chemically synthesized building blocks into predefined patterns using a hybrid top-down/bottom-up fabrication approach that overcomes some of the limitations of conventional top-down fabrication methods with regard to minimum available feature size and structural complexity. NCAs can sustain near-field interactions between nanoparticles within individual clusters as well as between entire neighboring clusters. The availability of near-field interactions on multiple length scales - together with the ability to further enhance the coupled plasmon modes through photonic modes in carefully designed array morphologies - leads to a multiscale cascade electromagnetic field enhancement throughout the array. This feature article introduces the design and fabrication fundamentals of NCAs and characterizes the electromagnetic coupling mechanisms in the arrays. Furthermore, it reviews how the optical properties of NCAs can be tuned through the size and shape of the nanoparticle building blocks and the geometry, size, and separation of the assembled clusters. NCAs have potential applications in many different areas; this feature article focuses on plasmon enhanced biosensing and surface enhanced Raman spectroscopy (SERS), in particular.

A review on the fabrication of substrates for surface enhanced Raman spectroscopy and their applications in analytical chemistry

This work reviews different types of substrates used for surface-enhanced Raman scattering (SERS) that have been developed in the last 10 years. The different techniques of self-assembly to immobilize metallic nanoparticles on solid support are covered. An overview of SERS platforms developed using nanolithography methods, including electron-beam (e-beam) lithography and focused ion beam (FIB) milling are also included, together with several examples of template-based methodologies to generate metallic nano-patterns. The potential of SERS to impact several aspects of analytical chemistry is demonstrated by selected examples of applications in electrochemistry, biosensing, environmental analysis, and remote sensing. This review shows that highly enhancing SERS substrates with a high degree of reliability and reproducibility can now be fabricated at relative low cost, indicating that SERS may finally realize its full potential as a very sensitive tool for routine analytical applications.

A nanosensor for TNT detection based on molecularly imprinted polymers and surface enhanced Raman scattering

We report on a new sensor strategy that integrates molecularly imprinted polymers (MIPs) with surface enhanced Raman scattering (SERS). The sensor was developed to detect the explosive, 2,4,6-trinitrotoluene (TNT). Micron thick films of sol gel-derived xerogels were deposited on a SERS-active surface as the sensing layer. Xerogels were molecularly imprinted for TNT using non-covalent interactions with the polymer matrix. Binding of the TNT within the polymer matrix results in unique SERS bands, which allow for detection and identification of the molecule in the MIP. This MIP-SERS sensor exhibits an apparent dissociation constant of (2.3 ± 0.3) × 10(-5) M for TNT and a 3 μM detection limit. The response to TNT is reversible and the sensor is stable for at least 6 months. Key challenges, including developing a MIP formulation that is stable and integrated with the SERS substrate, and ensuring the MIP does not mask the spectral features of the target analyte through SERS polymer background, were successfully met. The results also suggest the MIP-SERS protocol can be extended to other target analytes of interest.

Optical antenna arrays on a fiber facet for in situ surface-enhanced Raman scattering detection

This paper reports a bidirectional fiber optic probe for the detection of surface-enhanced Raman scattering (SERS). One facet of the probe features an array of gold optical antennas designed to enhance Raman signals, while the other facet of the fiber is used for the input and collection of light. Simultaneous detection of benzenethiol and 2-[(E)-2-pyridin-4-ylethenyl]pyridine is demonstrated through a 35 cm long fiber. The array of nanoscale optical antennas was first defined by electron-beam lithography on a silicon wafer. The array was subsequently stripped from the wafer and then transferred to the facet of a fiber. Lithographic definition of the antennas provides a method for producing two-dimensional arrays with well-defined geometry, which allows (i) the optical response of the probe to be tuned and (ii) the density of "hot spots" generating the enhanced Raman signal to be controlled. It is difficult to determine the Raman signal enhancement factor (EF) of most fiber optic Raman sensors featuring hot spots because the geometry of the Raman enhancing nanostructures is poorly defined. The ability to control the size and spacing of the antennas enables the EF of the transferred array to be estimated. EF values estimated after focusing a laser directly onto the transferred array ranged from 2.6 x 10(5) to 5.1 x 10(5).