Hyphenation of Gas Chromatography to Microcoil 1H Nuclear Magnetic Resonance Spectroscopy

High information spectroscopic detection techniques for gas chromatography

Gas chromatography has always been a simple and widely used technique for the separation of volatile compounds and their quantitation. However, the common detectors used with this technique are mostly universal and do not provide any specific qualitative information. There have been some attempts to combine the separation power of GC with the qualitative capabilities of "high-information" spectroscopic techniques including infrared spectroscopy, nuclear magnetic resonance spectroscopy, molecular rotational resonance spectroscopy, and vacuum ultraviolet spectroscopy. Some of these hyphenations have proven to be quite successful while others were less so. The history of such attempts, up to the most recent studies in this area, are discussed. Most recently, the hyphenation of GC with molecular rotational resonance spectroscopy which provides promising results and is a newly developed technique is reviewed and compared to previous high-information spectroscopic detection approaches. The history, description and features of each method along with their applications and challenges are discussed.

Enhancing Sensitivity for High-Selectivity Gas Chromatography-Molecular Rotational Resonance Spectroscopy

A next-generation gas chromatograph-molecular rotational resonance (MRR) spectrometer (GC-MRR) with instrumental improvements and higher sensitivity is described. MRR serves as a structural information-rich detector for GC with extremely narrow linewidths and capabilities surpassing 1H nuclear magnetic resonance/Fourier transform infrared spectroscopy/mass spectrometry (MS) while offering unparalleled specificity in regard to a molecule's three-dimensional structure. With a Fabry-Pérot cavity and a supersonic jet incorporated into a GC-MRR, dramatic improvements in sensitivity for molecules up to 244 Da were achieved in the microwave region compared to the only prior work, which demonstrated the GC-MRR idea for the first time with millimeter waves. The supersonic jet cools the analytes to ∼2 K, resulting in a limited number of molecular rotational and vibrational levels and enabling us to obtain stronger GC-MRR signals. This has allowed the limits of detection of the GC-MRR to be comparable to a GC thermal conductivity detector with an optimized choice of gases. The performance of this GC-MRR system is reported for a range of molecules with permanent dipole moments, including alcohols, nitrogen heterocyclics, halogenated compounds, dioxins, and nitro compounds in the molecular mass range of 46-244 Da. The lowest amount of any substance yet detected by MRR in terms of mass is reported in this work. A theoretically unexpected finding is reported for the first time about the effect of the GC carrier gas (He, Ne, and N2) on the sensitivity of the analysis in the presence of the gas driving the supersonic jet (He, Ne, and N2) in the GC-MRR. Finally, the idea of total molecule monitoring in the GC-MRR analogous to selected ion monitoring in GC-MS is illustrated. Structural isomers and isotopologues of bromobutanes and bromonitrobenzenes are used to demonstrate this concept.

The integration of LC-MS and NMR for the analysis of low molecular weight trace analytes in complex matrices

This review discusses the integration of liquid chromatography (LC), mass spectrometry (MS), and nuclear magnetic resonance (NMR) in the comprehensive analysis of small molecules from complex matrices. We first discuss the steps taken toward making the three technologies compatible, so as to create an efficient analytical platform. The development of online LC-MS-NMR, highlighted by successful applications in the profiling of highly concentrated analytes (LODs 10 μg) is discussed next. This is followed by a detailed overview of the alternative approaches that have been developed to overcome the challenges associated with online LC-MS-NMR that primarily stem from the inherently low sensitivity of NMR. These alternative approaches include the use of stop-flow LC-MS-NMR, loop collection of LC peaks, LC-MS-SPE-NMR, and offline NMR. The potential and limitations of all these approaches is discussed in the context of applications in various fields, including metabolomics and natural product discovery.

Quantitative NMR spectroscopy for gas analysis for production of primary reference gas mixtures

Due to its direct correlation to the number of spins within a sample quantitative NMR spectroscopy (qNMR) is a promising method with absolute comparison abilities in complex systems in technical, as well as metrological applications. Most of the samples studied with qNMR are in liquid state in diluted solutions, while gas-phase applications represent a rarely applied case. Commercially available NMR equipment was used for purity assessment of liquid and liquefied hydrocarbons serving as raw materials for production of primary reference gas standards. Additionally, gas-phase studies were performed within an online NMR flow probe, as well as in a high-pressure NMR setup to check feasibility as verification method for the composition of gas mixtures.

Pharmaceutical impurities and degradation products: uses and applications of NMR techniques

Current standards and regulations demand the pharmaceutical industry not only to produce highly pure drug substances, but to achieve a thorough understanding of the impurities accompanying their manufactured drug substances and products. These challenges have become important goals of process chemistry and have steadily stimulated the search of impurities after accelerated or forced degradation procedures. As a result, impurity profiling is one of the most attractive, active and relevant fields of modern pharmaceutical analysis. This activity includes the identification, structural elucidation and quantitative determination of impurities and degradation products in bulk drugs and their pharmaceutical formulations. Nuclear magnetic resonance (NMR) spectroscopy has evolved into an irreplaceable approach for pharmaceutical quality assessment, currently playing a critical role in unequivocal structure identification as well as structural confirmation (qualitative detection), enabling the understanding of the underlying mechanisms of the formation of process and/or degradation impurities. NMR is able to provide qualitative information without the need of standards of the unknown compounds and multiple components can be quantified in a complex sample without previous separation. When coupled to separative techniques, the resulting hyphenated methodologies enhance the analytical power of this spectroscopy to previously unknown levels. As a result, and by enabling the implementation of rational decisions regarding the identity and level of impurities, NMR contributes to the goal of making better and safer medicines. Herein are discussed the applications of NMR spectroscopy and its hyphenated derivate techniques to the study of a wide range pharmaceutical impurities. Details on the advantages and disadvantages of the methodology and well as specific challenges with regards to the different analytical problems are also presented.

Simple preparative gas chromatographic method for isolation of menthol and menthone from peppermint oil, with quantitative GC-MS and (1) H NMR assay

The quantitative performance of a simple home-built preparative gas chromatography (prep-GC) arrangement was tested, incorporating a micro-fluidic Deans switch, with collection of the target compound in a deactivated uncoated capillary tube. Repeat injections of a standard solution and peppermint sample were made into the prep-GC instrument. Individual compounds were eluted from the trapping capillary, and made up to constant volume. Chloronaphthalene internal standard was added in some cases. Recovered samples were quantitatively assayed by using GC-MS. Calibration linearity of GC-MS for menthol standard area response against number of injections (2-20 repeat injections) was excellent, giving R(2) of 0.996. For peppermint, menthol correlation over 2-20 repeated injections was 0.998 for menthol area ratio (versus IS) data. Menthone calibration for peppermint gave an R(2) of 0.972. (1) H NMR spectroscopy was conducted on both menthol and menthone. Good correspondence with reference spectra was obtained. About 80 μg of isolated menthol and menthone solute was collected over a sequence of 80 repeat injections from the peppermint sample, as assayed by 600 MHz (1) H NMR analysis (∼100% recovery for menthol from peppermint). A procedure is proposed for prediction of number of injections required to acquire sufficient material for NMR detection.

From single to multiple microcoil flow probe NMR and related capillary techniques: a review

Nuclear magnetic resonance (NMR) spectroscopy is one of the most important and powerful instrumental analytical techniques for structural elucidation of unknown small and large (complex) isolated and synthesized compounds in organic and inorganic chemistry. X-ray crystallography, neutron scattering (neutron diffraction), and NMR spectroscopy are the only suitable methods for three-dimensional structure determination at atomic resolution. Moreover, these methods are complementary. However, by means of NMR spectroscopy, reaction dynamics and interaction processes can also be investigated. Unfortunately, this technique is very insensitive in comparison with other spectrometric (e.g., mass spectrometry) and spectroscopic (e.g., infrared spectroscopy) methods. Mainly through the development of stronger magnets and more sensitive solenoidal microcoil flow probes, this drawback has been successfully counteracted. Capillary NMR spectroscopy increases the mass-based sensitivity of the NMR spectroscopic analysis up to 100-fold compared with conventional 5-mm NMR probes, and thus can be coupled online and off-line with other microseparation and detection techniques. It offers not only higher sensitivity, but in many cases provides better quality spectra than traditional methods. Owing to the immense number of compounds (e.g., of natural product extracts and compound libraries) to be examined, single microcoil flow probe NMR spectroscopy will soon be far from being sufficiently effective as a screening method. For this reason, an inevitable trend towards coupled microseparation-multiple microcoil flow probe NMR techniques, which allow simultaneous online and off-line detection of several compounds, will occur. In this review we describe the current status and possible future developments of single and multiple microcoil capillary flow probe NMR spectroscopy and its application as a high-throughput tool for the analysis of a large number of mass-limited samples. The advantages and drawbacks of different coupled microseparation-capillary NMR spectroscopy techniques, such as capillary high-performance liquid chromatography-NMR spectroscopy, capillary electrophoresis-NMR spectroscopy, and capillary gas chromatography-NMR spectroscopy, are discussed and demonstrated by specific applications. Another subject of discussion is the progress in parallel NMR detection techniques. Furthermore, the applicability and mixing capability of tiny reactor systems, termed "microreactors" or "micromixers," implemented in NMR probes is demonstrated by carbamate- and imine-forming reactions.

Accelerating analysis for metabolomics, drugs and their metabolites in biological samples using multidimensional gas chromatography

Gas chromatography (GC) with mass spectrometry (MS) is one of the great enabling analytical tools available to the chemical and biochemical analyst for the measurement of volatile and semi-volatile compounds. From the analysis result, it is possible to assess progress in chemical reactions, to monitor environmental pollutants in a wide range of soil, water or air samples, to determine if an athlete or horse trainer has contravened doping laws, or if crude oil has migrated through subsurface rock to a reservoir. Each of these scenarios and samples has an associated implementation method for GC-MS. However, few samples and the associated interpretation of data is as complex or important as biochemical sample analysis for trace drugs or metabolites. Improving the analysis in both the GC and MS domains is a continual search for better separation, selectivity and sensitivity. Multidimensional methods are playing important roles in providing quality data to address the needs of analysts.

Nanogram-scale preparation and NMR analysis for mass-limited small volatile compounds

Semiochemicals are often produced in infinitesimally small quantities, so their isolation requires large amounts of starting material, not only requiring significant effort in sample preparation, but also resulting in a complex mixture of compounds from which the bioactive compound needs to be purified and identified. Often, compounds cannot be unambiguously identified by their mass spectra alone, and NMR analysis is required for absolute chemical identification, further exacerbating the situation because NMR is relatively insensitive and requires large amounts of pure analyte, generally more than several micrograms. We developed an integrated approach for purification and NMR analysis of <1 µg of material. Collections from high performance preparative gas-chromatography are directly eluted with minimal NMR solvent into capillary NMR tubes. With this technique, ¹H-NMR spectra were obtained on 50 ng of geranyl acetate, which served as a model compound, and reasonable H-H COSY NMR spectra were obtained from 250 ng of geranyl acetate. This simple off-line integration of preparative GC and NMR will facilitate the purification and chemical identification of novel volatile compounds, such as insect pheromones and other semiochemicals, which occur in minute (sub-nanogram), and often limited, quantities.

Online coupling of enantioselective capillary gas chromatography with proton nuclear magnetic resonance spectroscopy

The hyphenation of enantioselective capillary gas chromatography and mass spectrometry is not always sufficient to distinguish between structural isomers, thus requiring peak identification by NMR spectroscopy. Here the first online coupling of enantioselective capillary gas chromatography with proton nuclear resonance spectroscopy is described for the unfunctionalized chiral alkane 2,4-dimethylhexane resolved on octakis(6-O-methyl-2,3-di-O-pentyl)-gamma-cyclodextrin at 60 degrees C. NMR allows constitutional and configurational isomers (diastereomers and enantiomers) to be distinguished. Enantiomers display identical spectra at different retention times, which enable an indirect identification of these unfunctionalized alkanes. The presented method is still at an early development stage, and will require instrumental optimization in the future.

Design and construction of a versatile dual volume heteronuclear double resonance microcoil NMR probe

Improved NMR detection of mass limited samples can be obtained by taking advantage of the mass sensitivity of microcoil NMR, while throughput issues can be addressed using multiple, parallel sample detection coils. We present the design and construction of a double resonance 300-MHz dual volume microcoil NMR probe with thermally etched 440-nL detection volumes and fused silica transfer lines for high-throughput stopped-flow or flow-through sample analysis. Two orthogonal solenoidal detection coils and the novel use of shielded inductors allowed the construction of a probe with negligible radio-frequency cross talk. The probe was resonated at (1)H-(2)D (upper coil) and (1)H-(13)C (lower coil) frequencies such that it could perform 1D and 2D experiments with active locking frequency. The coils exhibited line widths of 0.8-1.1 Hz with good mass sensitivity for both (1)H and (13)C NMR detection. (13)C-directly detected (2)D HETCOR spectra of 5% v/v (13)C labeled acetic acid were obtained in less than 5 min. Demonstration of the probe characteristics as well as applications of the versatile two-coil double resonance probe are discussed.

Online coupling of gas chromatography to nuclear magnetic resonance spectroscopy: method for the analysis of volatile stereoisomers

The identification of volatile cis/trans-stereoisomers was accomplished by employing a hyphenated GC-NMR system. The chromatographic and spectroscopic conditions were optimized with respect to the (1)H NMR detection. A special processing technique was developed to handle the recorded NMR spectra in the gas phase with very low sample amounts. The processed stopped-flow (1)H NMR spectra of the investigated chromatographic peaks unequivocally revealed the structure of the corresponding compounds.