Hydroxynaphthoquinone Ultrathin Films Obtained by Diazonium Electroreduction: Toward Design of Biosensitive Electroactive Interfaces

Scanning Electrochemical Microscopy Study of Permeability of a Thiolated Aryl Multilayer and Imaging of Single Nanocubes Anchored to It

Electroreduction of diazonium salts is a widely used technique for grafting organic films on various surfaces. In this paper, scanning electrochemical microscopy (SECM) was used for high-resolution characterization of a thiolated aryl multilayer film obtained by electrografting of thiophenol diazonium on highly ordered pyrolytic graphite (HOPG). The blocking properties of the film were evaluated, and the origins of incomplete surface passivation were elucidated by comparing current-distance curves and surface reactivity maps obtained with nanometer- and micrometer-sized tips. In this way, one can distinguish between different pathways of charge transport in the film, e.g., pinhole defects versus rate-limiting charge transfer through the film. Pd nanocubes were anchored to the film by thiol groups and imaged by SECM. The applicability of SECM to in situ visualization of the geometry of non-spherical nanoparticles has been demonstrated.

Grafting of a peptide probe for Prostate-Specific Antigen detection using diazonium electroreduction and click chemistry

The main objective of this work was to validate a label-free electrochemical method of protein detection using peptides as capture probes. As a proof-of-concept, we used a 7 amino acids sequence (HSSKLQL) specific for Prostate Specific Antigen. We investigated various electrografting conditions of two anilines (2-[(4-aminophenyl)sulfanyl]-8-hydroxy-1,4-naphthoquinone and 4-azidoaniline) further converted in situ into their corresponding diazonium salts on glassy carbon electrodes. It was demonstrated that the best method to obtain a mixed layer is the simultaneous electroreduction of the two diazonium salts. 4-azidoaniline was used to covalently immobilize the ethynyl-functionalized peptide probe by click coupling, and the hydroxynaphthoquinone derivative plays the role of electrochemical transducer of the peptide-protein recognition. The proteolytic activity of PSA towards a small peptide substrate carrying streptavidin at its distal end was also investigated to design an original sensing architecture leading to a reagentless, label free, and "signal-on" PSA sensor. Without optimization, the limit of quantification can be estimated in the nM to pM range.

A sensitive and versatile "signal-on" electrochemical aptasensor based on a triple-helix molecular switch

In the present study, a versatile "signal-on" electrochemical aptasensor based on a triple-helix molecular switch has been developed. An aptamer probe is designed to hybridize with the methylene blue (MB)-modified DNA capture probe immobilized on the gold electrode to form rigid triple-helix DNA, impeding the efficient electron transfer of MB to the electrode and resulting in the decreased oxidation peak current of MB. However, upon introduction of the perfectly matched target, for example, human α-thrombin (Tmb), the interaction between Tmb and the aptamer probe leads to the dissociation of the triple-helix DNA structure and thereby liberates the MB-modified end of the capture probe, allowing the MB to collide with the electrode surface and resulting in an increase of the oxidation peak currents of MB. Therefore, the sensitive signal-on detection of Tmb is realized, and the detection limit of Tmb is 0.12 nM. The proposed approach also demonstrates excellent regenerability, reproducibility and stability. Additionally, it also has the advantages of simplicity in design and easy operation. The success in the present biosensor provides a promising alternative to the electrochemical detection of a variety of analytes and may have potential applications in point-of-care testing and clinical diagnosis.

Elucidation of the mechanism of redox grafting of diazotated anthraquinone

Redox grafting of aryldiazonium salts containing redox units may be used to form exceptionally thick covalently attached conducting films, even in the micrometers range, in a controlled manner on glassy carbon and gold substrates. With the objective to investigate the mechanism of this process in detail, 1-anthraquinone (AQ) redox units were immobilized on these substrates by electroreduction of 9,10-dioxo-9,10-dihydroanthracene-1-diazonium tetrafluoroborate. Electrochemical quartz crystal microbalance was employed to follow the grafting process during a cyclic voltammetric sweep by recording the frequency change. The redox grafting is shown to have two mass gain regions/phases: an irreversible one due to the addition of AQ units to the substrate/film and a reversible one due to the association of cations from the supporting electrolyte with the AQ radical anions formed during the sweeping process. Scanning electrochemical microscopy was used to study the relationship between the conductivity of the film and the charging level of the AQ redox units in the grafted film. For that purpose, approach curves were recorded at a platinum ultramicroelectrode for AQ-containing films on gold and glassy carbon surfaces using the ferro/ferricyanide redox system as redox probe. It is concluded that the film growth has its origin in electron transfer processes occurring through the layer mediated by the redox moieties embedded in the organic film.

Redox grafting of diazotated anthraquinone as a means of forming thick conducting organic films

Thick conductive layers containing anthraquinone moieties are covalently immobilized on gold using redox grafting of the diazonium salt of anthraquinone (i.e., 9,10-dioxo-9,10-dihydroanthracene-1-diazonium tetrafluoroborate). This grafting procedure is based on using consecutive voltammetric sweeping and through this exploiting fast electron transfer reactions that are mediated by the anthraquinone redox moieties in the film. The fast film growth, which is followed by infrared reflection absorption spectroscopy, atomic force microscopy, X-ray photoelectron spectroscopy, ellipsometry, and coverage calculation, results in a mushroom-like structure. In addition to varying the number of sweeps, layer thickness control can easily be exerted through appropriate choice of the switching potential and sweep rate. It is shown that the grafting of the diazonium salt is essentially a diffusion-controlled process but also that desorption of physisorbed material during the sweeping process is essentially for avoiding blocking of the film due to clogging of the electrolyte channels in the film. In general, sweep rates higher than 0.5 V s(-1) are required if thick, porous, and conducting films should be formed.

Multiscale-tailored bioelectrode surfaces for optimized catalytic conversion efficiency

We describe the elaboration of a multiscale-tailored bioelectrocatalytic system. The combination of two enzymes, D-sorbitol dehydrogenase and diaphorase, is studied with respect to the oxidation of D-sorbitol as a model system. The biomolecules are immobilized in an electrodeposited paint (EDP) layer. Reproducible and efficient catalysis of D-sorbitol oxidation is recorded when this system is immobilized on a gold electrode modified by a self-assembled monolayer of 4-carboxy-(2,5,7-trinitro-9-fluorenylidene)malonitrile used as a mediator. The insertion of mediator-modified gold nanoparticles into the EDP film increases significantly the active surface area for the catalytic reaction, which can be further enhanced when the whole system is immobilized in macroporous gold electrodes. This multiscale architecture finally leads to a catalytic device with optimized efficiency for potential use in biosensors, bioelectrosynthesis, and biofuel cells.