Polycyclic Aromatic Hydrocarbon Detection by Electrochemiluminescence Generating Ag/TiO2 Nanotubes

An electrochemiluminescence sensor based on CsPbBr3 -zquantum dots and poly (3-thiophene acetic acid) cross-linked nanogold imprinted layer for the determination of benzo(a)pyrene in edible oils

A novel quench molecularly imprinted electrochemiluminescence sensor (MIECLS) based on a covalent organic framework composite (COF-300-Au) with enhanced electrochemiluminescence (ECL) signal from CsPbBr₃ quantum dots and cross-linked 3-thiopheneacetic acid functionalized AuNPs (3-TAA@AuNPs) was developed for the detection of the environmental pollutant benzo(a)pyrene (BaP). A composite material constructed of COF-300-Au with a large specific surface area served as the sensor's support substrate, providing more CsPbBr₃ and imprint recognition sites. Electropolymerization was then employed to form an AuNPs three-dimensional imprinting layer with polythiophene cross-linked using BaP as a template and 3-TAA@AuNPs as a functional monomer. A specific cross-linked imprinting recognition effect was recorded on BaP along with the quenching effect of quinones. The density functional theory (DFT) evaluation of the binding mechanism between 3-TAA@AuNPs and BaP revealed powerful MIECLS toward the detection of BaP at concentrations ranging from 10^-14 to 10^-5M, with a detection limit of as low as 4.1 × 10^-15 M.

Simultaneous electrochemical determination of persistent petrogenic organic pollutants based on AgNPs synthesized using carbon dots derived from mushroom

Polycyclic aromatic hydrocarbons (PAHs) are highly carcinogenic substances and accumulate in water bodies through various industries. Due to their harmful effects on humans, it is very important to monitor PAHs in various water resources. In the present work, we report an electrochemical sensor based on silver nanoparticles synthesized using mushroom-derived carbon dots for the simultaneous determination of anthracene and naphthalene, for the first time. Pleurotus species mushroom was used to synthesize the carbon dots (C-dots) via the hydrothermal method and these C-dots were used as a reducing agent for the synthesis of silver nanoparticles (AgNPs). The synthesized AgNPs have been characterized through UV-Visible and FTIR spectroscopy, DLS, XRD, XPS, FE-SEM, and HR-TEM. Well-characterized AgNPs were used to modify glassy carbon electrodes (GCEs) by the drop-casting method. Ag-NPs/GCE has shown strong electrochemical activity towards the oxidation of anthracene and naphthalene at well-separated potentials in phosphate buffer saline (PBS) at pH 7.0. The sensor exhibited a wide linear working range of 250 nM to 1.15 mM for anthracene and 500 nM to 842 μM for naphthalene with the corresponding lowest detection limits (LODs) of 112 nM and 383 nM respectively with extraordinary anti-interference ability against many possible interferents. The fabricated sensor showed high stability and reproducibility. The usefulness of the sensor for the monitoring of anthracene and naphthalene in a seashore soil sample has been demonstrated by the standard addition method. The sensor gave better results with a high recovery percentage indicating the first-ever device to detect two PAHs at the single electrode with the best analytical results.

Electrochemiluminescence with semiconductor (nano)materials

Electrochemiluminescence (ECL) is the light production triggered by reactions at the electrode surface. Its intrinsic features based on a dual electrochemical/photophysical nature have made it an attractive and powerful method across diverse fields in applied and fundamental research. Herein, we review the combination of ECL with semiconductor (SC) materials presenting various typical dimensions and structures, which has opened new uses of ECL and offered exciting opportunities for (bio)sensing and imaging. In particular, we highlight this particularly rich domain at the interface between photoelectrochemistry, SC material chemistry and analytical chemistry. After an introduction to the ECL and SC fundamentals, we gather the recent advances with representative examples of new strategies to generate ECL in original configurations. Indeed, bulk SC can be used as electrode materials with unusual ECL properties or light-addressable systems. At the nanoscale, the SC nanocrystals or quantum dots (QDs) constitute excellent bright ECL nano-emitters with tuneable emission wavelengths and remarkable stability. Finally, the challenges and future prospects are discussed for the design of new detection strategies in (bio)analytical chemistry, light-addressable systems, imaging or infrared devices.

Contemporary Research Progress on the Detection of Polycyclic Aromatic Hydrocarbons

Polycyclic aromatic hydrocarbons (PAHs) are a class of the most common and widespread contaminants. The accumulation of PAHs has made a certain impact on the environment and is seriously threatening human health. Numerous general analytical methods suitable for PAHs were developed. With the development of economy, the environmental problems of PAHs in modern society are more extensive and prominent, and attract more attention from environmental scientists and analysts. Deeper understanding of the properties of PAHs depends on the advent of detection methods, which can also be more conducive to promoting the protection of the environment. Till now, more sensitive, more high-speed and more high-throughput analytical tools are being invented and have played important roles in the research of PAHs. In this short review article, we focused mainly on the contemporary analytical methods about PAHs. We started with a brief review on the hazards, migration, distribution and traditional analysis methods of PAHs in recent years, including liquid chromatography, gas chromatography, surface enhanced Raman spectroscopy and so on. We also presented the applications of the modern ambient mass spectrometry, especially microwave plasma torch mass spectrometry, in the detection of PAHs, as well as the far out novel results in our lab by using microwave plasma torch (MPT) mass spectrometry; for example, some new insights about Birch reduction, regular hydrogen addition and the robustness of molecular structure. These studies have demonstrated the versatility of MPT MS as a platform in the research of PAHs.

Covalent organic frameworks as multifunctional materials for chemical detection

Sensitive and selective detection of chemical and biological analytes is critical in various scientific and technological fields. As an emerging class of multifunctional materials, covalent organic frameworks (COFs) with their unique properties of chemical modularity, large surface area, high stability, low density, and tunable pore sizes and functionalities, which together define their programmable properties, show promise in advancing chemical detection. This review demonstrates the recent progress in chemical detection where COFs constitute an integral component of the achieved function. This review highlights how the unique properties of COFs can be harnessed to develop different types of chemical detection systems based on the principles of chromism, luminescence, electrical transduction, chromatography, spectrometry, and others to achieve highly sensitive and selective detection of various analytes, ranging from gases, volatiles, ions, to biomolecules. The key parameters of detection performance for target analytes are summarized, compared, and analyzed from the perspective of the detection mechanism and structure-property-performance correlations of COFs. Conclusions summarize the current accomplishments and analyze the challenges and limitations that exist for chemical detection under different mechanisms. Perspectives on how future directions of research can advance the COF-based chemical detection through innovation in novel COF design and synthesis, progress in device fabrication, and exploration of novel modes of detection are also discussed.

Electrochemical sensing for naphthol isomers based on the in situ growth of zeolitic imidazole framework-67 on ultrathin CoAl layered double hydroxide nanosheets by a reaction-diffusion technique

It is established that ultrathin layered double hydroxide nanosheets (LDHNS) and zeolitic imidazole frameworks (ZIF) are desirable electrochemical sensing modifiers owing to their large surface area and abundant catalytic sites. Integration of them is thus an effective solution to maximize their electrocatalytic activity. Herein, a novel reaction-diffusion framework (RDF) technique is applied for the in situ growth of ZIF-67 on ultrathin CoAl-LDHNS (CoAl-LDHNS@ZIF-67). In a confined space of the agar gel matrix of RDF, the coordination reaction between organic ligands and CoAl-LDHNS without an additional Co²⁺ source achieves the controllable growth of ZIF-67 crystals through a long vertical diffusion. The prepared composite comprises both CoAl-LDHNS and ZIF-67 components with a certain ratio and provides a large surface area and amply catalytic sites, thus realizing a rapid transfer of electron and mass. The CoAl-LDHNS@ZIF-67 modified electrode is employed for the simultaneous detection of naphthol isomers by differential pulse voltammetry. Naphthol isomers display anodic reactions with a wide peak potential difference, allowing their simultaneous detection feasible. Voltammetric responses of α-naphthol and β-naphthol follow good linearity against the concentration in a wide range from 0.3 to 150 μM with limits of detection of 54 and 82 nM, respectively. The proposed sensor also demonstrates excellent selectivity, stability, reproducibility, and practicability for the simultaneous detection of naphthol isomers.

Electrochemical sensing platform for naphthol isomers based on in situ growth of ZIF-8 on reduced graphene oxide by a reaction-diffusion technique

Enhancing the dispersibility and conductivity is an effective solution to develop the application zeolitic imidazole frameworks (ZIF) in the electrochemical field. This work thus employs a novel reaction-diffusion framework (RDF) technique for the in situ growth of ZIF-8 crystals on graphene oxide (GO@ZIF-8) matrixes. In detail, the outer electrolyte of 2-methyl imidazole naturally diffuses into the inner agar gel matrix containing Zn²⁺ cations and GO nanosheets. The long reaction-diffusion makes the growth of ZIF-8 crystals controllable in a vertical gradient. After thermal treatment, the title product of ZIF-8 in situ grown on reduced graphene oxide (rGO@ZIF-8) is obtained and thus exhibits good dispersibility, high conductivity, large surface area, and more catalytic sites. The glassy carbon electrode (GCE) was modified by casting the rGO@ZIF-8 suspension. The obtained rGO@ZIF-8/GCE displays excellent catalytic activity toward naphthol (NAP) isomers. Under the optimal conditions, the amperometric currents of 1-NAP and 2-NAP demonstrate the good linear relationship in wide ranges of 0.05-12 μM and 0.02-15 μM, respectively. Their limits of detection are as low as 15 and 17 nM, respectively. The fabricated modified electrode exhibits excellent selectivity, stability, and reproducibility. The sensor is also utilized to detect NAP molecules in real water samples and indicates good accuracy and reliability.

An off-on electrochemiluminescence detection for microRNAs based on TiO2 nanotubes sensitized with gold nanoparticles as enhanced emitters

A sensitive electrochemiluminescence (ECL) assay for microRNAs (miRNAs) based on a semiconductor nanomaterial sensitized with noble-metal Au nanoparticles (NPs) is successfully developed. TiO₂ nanotubes (NTs) were equipped with Au NPs to obtain an enhanced ECL emitter. Then, an ECL assay for miRNA-21 was fabricated, which was based on the use of probe 2 DNA-functionalized Pt/PAMAM nanocomposites (NCs) assembled on the surface of Au/TiO₂ NT conjugate via DNA hybridization between probe 1 DNA and capture DNA. The Pt/PAMAM NCs act as an ECL quencher of Au/TiO₂ NTs via resonance energy transfer. After the binding of target miRNA-21 and the capture DNA, the Pt/PAMAM NCs were released and the ECL signal was recovered. An "off-on" ECL assay was achieved with a linear response from 0.01 to 10,000 pM. Finally, this method has been validated to be sensitive and specific for miRNAs in human serum samples. The ECL enhancement strategy opens a new way for fabricating various sensitive biosensors. Graphical abstract A sensitive "off-on" electrochemiluminescence analysis method was developed, which combined Au NP-enhanced ECL emission of TiO₂ nanotubes and an efficient energy-transfer system between Au/TiO₂ nanotubes and Pt/PAMAM nanocomposites.

Organic Dots Embedded in Mesostructured Silica Xerogel as High-Performance ECL Emitters: Preparation and Application for MicroRNA-126 Detection

Unlike the organic micro/nanocrystals prepared using an emerging reprecipitation method, a novel method of embedding 1-pyrenecarboxaldehyde dots (PycDs) into a mesostructured silica xerogel (PycDs@MSX) for use as electrochemiluminescence (ECL) emitters was first proposed to achieve an extremely strong ECL response, with peroxydisulfate (S₂O₈^2-) used as a coreactant. In this method, (i) PycDs@MSX could ensure the reversal of the PycDs environment from hydrophobic to hydrophilic and (ii) PycDs@MSX could provide massive porous channels, allowing for access of hydrophilic reactive intermediates (i.e., sulfate anion radicals, SO₄^•-), which could accelerate the rate of mass transfer and electron transfer between S₂O₈^2- and PycDs. Using Ag nanoparticles as a coreaction accelerator and a 3D DNA nanomachine as a signal amplification strategy, the proposed ECL biosensing platform was constructed and achieved ultrasensitive detection of microRNA-126 with an excellent linear range (from 100 aM to 100 pM) and a low detection limit (13.0 aM). More importantly, this work not only developed an innovative avenue to improve the ECL efficiency of organic emitters in aqueous phases but also provided a powerful strategy for biochemical analysis and disease diagnosis applications.

Signal-off electrochemiluminescence immunosensors based on the quenching effect between curcumin-conjugated Au nanoparticles encapsulated in ZIF-8 and CdS-decorated TiO2 nanobelts for insulin detection

Curcumin-conjugated Au nanoparticles wrapped in zeolitic Zn²⁺-imidazolate cross-linked framework nanoparticles quenched the ECL of CdS-decorated TiO₂ nanobelts.

Electrochemical Fabrication of rGO-embedded Ag-TiO2 Nanoring/Nanotube Arrays for Plasmonic Solar Water Splitting

Effective utilization of hot electrons generated from the decay of surface plasmon resonance in metal nanoparticles is conductive to improve solar water splitting efficiency. Herein, Ag nanoparticles and reduced graphene oxide (rGO) co-decorated hierarchical TiO2 nanoring/nanotube arrays (TiO2 R/T) were facilely fabricated by using two-step electrochemical anodization, electrodeposition, and photoreduction methods. Comparative studies were conducted to elucidate the effects of rGO and Ag on the morphology, photoresponse, charge transfer, and photoelectric properties of TiO2. Firstly, scanning electron microscope images confirm that the Ag nanoparticles adhered on TiO2 R/T and TiO2 R/T-rGO have similar diameter of 20 nm except for TiO2 R-rGO/T. Then, the UV-Vis DRS and scatter spectra reveal that the optical property of the Ag-TiO2 R/T-rGO ternary composite is enhanced, ascribing to the visible light absorption of plasmonic Ag nanoparticles and the weakening effect of rGO on light scattering. Meanwhile, intensity-modulated photocurrent spectroscopy and photoluminescence spectra demonstrate that rGO can promote the hot electrons transfer from Ag nanoparticles to Ti substrate, reducing the photogenerated electron-hole recombination. Finally, Ag-TiO2 R/T-rGO photoanode exhibits high photocurrent density (0.98 mA cm-2) and photovoltage (0.90 V), and the stable H2 evolution rate of 413 μL h-1 cm-2 within 1.5 h under AM 1.5 which exceeds by 1.30 times than that of pristine TiO2 R/T. In line with the above results, this work provides a reliable route synergizing rGO with plasmonic metal nanoparticles for photocatalysis, in which, rGO presents a broad absorption spectrum and effective photogenerated electrons transfer.

Influence of the Silver Nanoparticles (AgNPs) Formation Conditions onto Titanium Dioxide (TiO2) Nanotubes Based Electrodes on Their Impedimetric Response

This paper presents the comparison of the effects of three methods of production of silver spherical and near-spherical nanoparticles (AgNPs) on the titanium dioxide nanotubes (TNT) base: cyclic voltammetry, chronoamperometry, and sputter deposition. It also evaluates the influence of silver nanoparticles on the electrochemical properties of the developed electrodes. The novelty of this research was to fabricate regular AgNPs free of agglomerates uniformly distributed onto the TNT layer, which has not been accomplished with previous attempts. The applied methods do not require stabilizing and reducing reagents. The extensive electrochemical characteristic of AgNP/TNT was performed by open circuit potential and electrochemical impedance spectroscopy methods. For AgNPs/TNT obtained by each method, the impedance module of these electrodes was up to 50% lower when compared to TNT, which means that AgNPs enabled more efficient electron transfer due to the effective area increase. In addition, the presence of nanoparticles increases the corrosion resistance of the prepared electrodes. These substrates can be used as electrochemical sensors due to their high electrical conductivity, and also as implants due to the antibacterial properties of both the TNT and AgNPs.

An electrochemiluminescence cytosensor for sensitive detection of HeLa cells based on a signal amplification strategy of Au-NaYF4:Yb,Er nanocomposites

A novel electrochemiluminescence (ECL) cytosensor was proposed for the quantitative detection of HeLa cells (human cervical cancer cells) with the help of a signal amplification strategy. Firstly, the Au-NaYF4:Yb,Er nanocomposites were prepared by a simple in situ hydrothermal method and characterized by transmission electron microscopy (TEM) images, X-ray diffraction (XRD) patterns, UV-vis spectra and Fourier transform infrared (FTIR) spectra. Compared with the bare NaYF4:Yb,Er nanocomposites, the ECL intensity of Au-NaYF4:Yb,Er nanocomposites was greatly enhanced by about 4.2-fold which can be attributed to the good conductivity of gold nanoparticles (Au NPs). The nanocomposites showed high and stable ECL emission, fast response and superior conductivity, all of which were advantageous to the ECL detection. Furthermore, HeLa cells were immobilized on the modified electrode via the interaction between folic acid and a folate receptor present on the cell surface. The ECL cytosensor showed satisfactory sensitive response to HeLa cells in a linear range of 4.25 × 102-4.25 × 105 cells per mL with a low detection limit of 326 cells per mL. The proposed cytosensor had good sensitivity and stability, which can offer a great potential platform for bioassay analysis.

Ultrasensitive detection of transcription factors with a highly-efficient diaminoterephthalate fluorophore via an electrogenerated chemiluminescence strategy

Herein, we apply electrogenerated chemiluminescence (ECL) based method employing diaminoterephthalate analogue as ECL emitter and hairpin DNA as amplification strategy, for sensitive assay of transcription factors.

Enhanced photocatalytic, electrochemical and photoelectrochemical properties of TiO2 nanotubes arrays modified with Cu, AgCu and Bi nanoparticles obtained via radiolytic reduction

TiO₂ nanotubes arrays (NTs), obtained via electrochemical anodization of Ti foil, were modified with monometallic (Cu, Bi) and bimetallic (AgCu) nanoparticles. Different amounts of metals' precursors were deposited on the surface of NTs by the spin-coating technique, and the reduction of metals was performed via gamma radiolysis. Surface modification of titania was studied by EDS and XPS analysis. The results show that AgCu nanoparticles exist in a Ag_core-Cu_shell form. Photocatalytic activity was examined under UV irradiation and phenol was used as a model pollutant of water. Over 95% of phenol degradation was achieved after 60 min of irradiation for almost all examined samples, but only slight difference in degradation efficiency (about 3%) between modified and bare NTs was observed. However, the initial phenol degradation rate and TOC removal efficiency was significantly enhanced for the samples modified with 0.31 and 0.63 mol% of Bi as well as for all the samples modified with Cu and AgCu nanoparticles in comparison with bare titania nanotubes. The saturated photocurrent, under the influence of simulated solar light irradiation, for the most active Bi- and AgCu-modified samples, was over two times higher than for pristine NTs. All the examined materials were resistant towards photocorrosion processes that enables their application for long term processes induced by light.

Signal-on electrochemiluminescent aptasensors based on target controlled permeable films

A novel permeability gate-based electrochemiluminescent (ECL) aptasensor has been constructed by utilizing target-responsive polyelectrolyte-aptamer film deposited on the solid-state ECL electrode to control the rate of diffusion of a coreactant that triggers the ECL.

Electrochemical detection of benzo(a)pyrene in acetonitrile-water binary medium

Electrochemical oxidation of adsorbed benzo(a)pyrene (BaP) on the glassy carbon electrode (GCE) was explored in acetonitrile-water. When the GCE was incubated in 100 nM BaP acetonitrile-water (V(water):V(acetonitrile)=1:1) for 10 min at open circuit, and then transferred into blank acetonitrile-water (V(water):V(acetonitrile)=1:1, pH= 0.70) for differential pulse voltammetry measurement, a distinct oxidation peak at 0.98 V (vs. Ag/AgCl) was observed. The peak potential was about 180 mV lower than that in acetonitrile. Importantly, the peak current was more than 22 times greater. The effects of water on BaP preconcentration on the electrode and electrochemical oxidation were revealed, respectively. Based on the results, an electrochemical assay for BaP detection was developed. The GCE was respectively incubated in acetonitrile-water (V(water):V(acetonitrile)=1:1)with BaP concentration ranged from 0 nM to 1000 nM, and then transferred into the corresponding blank acetonitrile-water (pH= 0.70) for DPV measurements. When the BaP concentration was increased, an increased oxidative current at 0.98 V (vs. Ag/AgCl) was observed, and a detection limit of 0.67 nM was achieved. Because all other priority polycyclic aromatic hydrocarbons could not be electrochemically oxidized at 0.98 V, the electrochemical assay showed very high selectivity to BaP. Finally, the developed electrochemical assay was successfully applied to determination of BaP in a series of real world samples, such as drinking water, tap water, lake water and river water.

Selective growth of TiO2 beads on Ag nanowires and their photocatalytic performance

Necklace-like Ag nanowire@TiO₂ heterostructures were fabricated by a two-step solvothermal method, which exhibited excellent photocatalytic performance.

Electrochemical determination of phenanthrene based on anthraquinone sulfonate and poly diallyldimethylammonium chloride modified indium–tin oxide electrode

The amount of Phe could be quantified by the electrochemical oxidation peak current difference of AQS at AQS/PDDA/ITO through the specific interaction between AQS and Phe.

Supersensitive detection of chlorinated phenols by multiple amplification electrochemiluminescence sensing based on carbon quantum dots/graphene

A novel electrochemiluminescence (ECL) sensor based on carbon quantum dots (CQDs) immobilized on graphene (GR) has been first developed for the determination of chlorinated phenols (CPs) in water. The detection is based on the ECL signals from the interaction between the analytes and the excited CQDs (C(*+)) using S2O8(2-) as coreactant. GR facilitates both C(•-) and SO4(•-) production, resulting in a high yield of C(*+), and the multistage amplification effect leads to a nearly 48-fold ECL amplification. Pentachlorophenol (PCP) is often monitored as an important indicator for CPs in real environmental samples, but its ultratrace and real-time analysis is an intractable issue in environmental monitoring. The resulting ECL sensor enables the real-time detection of PCP with unprecedented sensitivity reaching 1.0 × 10(-12) M concentration in a wide linear range from 1.0 × 10(-12) to 1.0 × 10(-8) M. The ECL sensor showed high selectivity to CPs, especially to PCP. The practicability of the sensing platform in real water samples showed ideal recovery rates. It is envisaged that the eco-friendly and recyclable sensor could be employed in the identification of key CPs in the environment.