Combination of DNA ligase reaction and gold nanoparticle-quenched fluorescent oligonucleotides: a simple and efficient approach for fluorescent assaying of single-nucleotide polymorphisms

Identification of single nucleotide polymorphisms by a peptide nucleic acid-based sandwich hybridization assay coupled with toehold-mediated strand displacement reactions

In this work, we developed a simple and accurate peptide nucleic acid (PNA)-based sandwich hybridization assay for single nucleotide polymorphisms (SNPs) in the p53 gene. Our approach combines the enzyme-free toehold-mediated strand displacement reaction (SDR) with real-time enzyme-linked immunosorbent assay (ELISA) to detect SNPs with high sensitivity and specificity. A PNA-DNA heteroduplex with an external toehold is designed and fixed on well surface of a 96-well plate. The strand displacement from PNA-DNA heteroduplexes is initiated by the hybridization of target sequence with the toehold domain and ends with the fully displacing of the incumbent DNA. Finally, the as formed PNA-target DNA duplex with overhang at its 5'-end hybridizes with a biotin-labeled reporter PNA to form a sandwich structure on surface for signal amplification. The proposed PNA-based sandwich biosensor displays high sensitivity and greatly enhanced discriminability to target p53 gene segments against single-base mutant sequences compared to its all-DNA counterpart. Furthermore, the probe design is elegantly simple and the sensing procedure is easy to operate. We believe that this strategy may provide a simple and universal strategy for SNPs detection through easily altering the sequences of probes according to the sequences around target SNPs.

Enhanced mismatch selectivity of T4 DNA ligase far above the probe: Target duplex dissociation temperature

T4 DNA ligase is a widely used ligase in many applications; yet in single nucleotide polymorphism analysis, it has been found generally lacking owing to its tendency to ligate mismatches quite efficiently. To address this lack of selectivity, we explored the effect of temperature on the selectivity of the ligase in discriminating single base pair mismatches at the 3'-terminus of the ligating strand using short ligation probes (9-mers). Remarkably, we observe outstanding selectivities when the assay temperature is increased to 7 °C to 13 °C above the dissociation temperature of the matched probe:target duplexes using commercially available enzyme at low concentration. Higher enzyme concentration shifts the temperature range to 13 °C to 19 °C above the probe:target dissociation temperatures. Finally, substituting the 5'-phosphate terminus with an abasic nucleotide decreases the optimal temperature range to 7 °C to 10 °C above the matched probe:target duplex. We compare the temperature dependence of the T4 DNA ligase catalyzed ligation and a nonenzymatic ligation system to contrast the origin of their modes of selectivity. For the latter, temperatures above the probe:target duplex dissociation lead to lower ligation conversions even for the perfect matched system. This difference between the two ligation systems reveals the uniqueness of the T4 DNA ligase's ability to maintain excellent ligation yields for the matched system at elevated temperatures. Although our observations are consistent with previous mechanistic work on T4 DNA ligase, by mapping out the temperature dependence for different ligase concentrations and probe modifications, we identify simple strategies for introducing greater selectivity into SNP discrimination based on ligation yields.

A dual-cycling fluorescence scheme for ultrasensitive DNA detection through signal amplification and target regeneration

In this work, we propose an ultrasensitive fluorescence strategy for DNA detection. This method utilizes a molecular beacon (MB), a hairpin probe (HP), and an enzyme to trigger dual-cycling reactions (cycles I and II). In cycle I, the target is repeatedly used to amplify the fluorescence emission through hybridizations with the MB and cleavage reactions achieved by the enzyme. In cycle II, hybridization reactions between the HP and a segment of the MB continuously regenerate the target to trigger more cycle I reactions, leading to an enhanced fluorescent signal. The detection limit of the method is determined to be as low as 50 fM within 45 min, which is 2 to 3 orders of magnitude lower than that of the conventional fluorescence strategies. The method also shows a high selectivity over mismatched and random DNA sequences. The signal amplification mechanism of the strategy offers insights into constructing efficient and ultrasensitive biosensors for various applications.

One-step isothermal detection of multiple KRAS mutations by forming SNP specific hairpins on a gold nanoshell

We developed a one-step isothermal method for typing multiple KRAS mutations using a designed set of primers to form a hairpin on a gold nanoshell upon being ligated by a SNP specific DNA ligase after binding of targets. As a result, we could detect as low as 20 attomoles of KRAS mutations within 1 h.

Current Technologies of Electrochemical Immunosensors: Perspective on Signal Amplification

An electrochemical immunosensor employs antibodies as capture and detection means to produce electrical charges for the quantitative analysis of target molecules. This sensor type can be utilized as a miniaturized device for the detection of point-of-care testing (POCT). Achieving high-performance analysis regarding sensitivity has been one of the key issues with developing this type of biosensor system. Many modern nanotechnology efforts allowed for the development of innovative electrochemical biosensors with high sensitivity by employing various nanomaterials that facilitate the electron transfer and carrying capacity of signal tracers in combination with surface modification and bioconjugation techniques. In this review, we introduce novel nanomaterials (e.g., carbon nanotube, graphene, indium tin oxide, nanowire and metallic nanoparticles) in order to construct a high-performance electrode. Also, we describe how to increase the number of signal tracers by employing nanomaterials as carriers and making the polymeric enzyme complex associated with redox cycling for signal amplification. The pros and cons of each method are considered throughout this review. We expect that these reviewed strategies for signal enhancement will be applied to the next versions of lateral-flow paper chromatography and microfluidic immunosensor, which are considered the most practical POCT biosensor platforms.

Biochemical and Structural Characterisation of DNA Ligases from Bacteria and Archaea

DNA ligases are enzymes that seal breaks in the backbones of DNA, leading to them being essential for the survival of all organisms. DNA ligases have been studied from many different types of cells and organisms and shown to have diverse sizes and sequences, with well conserved specific sequences that are required for enzymatic activity. A significant number of DNA ligases have been isolated or prepared in recombinant forms and, here, we review their biochemical and structural characterisation. All DNA ligases contain an essential lysine that transfers an adenylate group from a co-factor to the 5'-phosphate of the DNA end that will ultimately be joined to the 3'-hydroxyl of the neighbouring DNA strand. The essential DNA ligases in bacteria use nicotinamide adenine dinucleotide ( β -NAD+) as their co-factor whereas those that are essential in other cells use adenosine-5'-triphosphate (ATP) as their co-factor. This observation suggests that the essential bacterial enzyme could be targeted by novel antibiotics and the complex molecular structure of β -NAD+ affords multiple opportunities for chemical modification. Several recent studies have synthesised novel derivatives and their biological activity against a range of DNA ligases has been evaluated as inhibitors for drug discovery and/or non-natural substrates for biochemical applications. Here, we review the recent advances that herald new opportunities to alter the biochemical activities of these important enzymes. The recent development of modified derivatives of nucleotides highlights that the continued combination of structural, biochemical and biophysical techniques will be useful in targeting these essential cellular enzymes.

The presence of a 5'-abasic lesion enhances discrimination of single nucleotide polymorphisms while inducing an isothermal ligase chain reaction

Lesion-induced DNA amplification (LIDA) has been employed in the detection of single nucleotide polymorphisms (SNPs). Due to the presence of the proximal abasic lesion, T4 DNA ligase exhibits greater intolerance to basepair mismatches when compared with mismatch ligation in the absence of the abasic lesion. Moreover the presence of the abasic group also results in an isothermal ligase chain reaction enabling SNP detection with great discrimination and sensitivity. Specifically, at forty minutes, the ratio of amplified product from the matched and mismatched initiated reactions are 7-12 depending on the mismatch. The ease of implementation of our method is demonstrated by real-time analysis of DNA amplification using a fluorescent plate reader.

Self-assembled biosensor with universal reporter and dual-quenchers for detection of unlabelled nucleic acids

A novel biosensor with universal reporter and dual quenchers was developed for rapid, sensitive, selective, and inexpensive detection of unlabelled nucleic acids. The biosensor is based on a single-strand DNA stem-loop motif with an extended universal reporter-binding region, a G-base rich stem region, and a universal address-binding region. The self-assembly of these stem-loop probes with fluorescence labeled universal reporter and a universal address region conjugated to gold nanoparticles forms the basis of a biosensor for DNA or microRNA targets in solution. The introduction of dual quenchers (G-base quenching and gold surface plasmon resonance-induced quenching) significantly reduces the fluorescence background to as low as 12% of its original fluorescence intensity and hence enhances the detection limit to 0.01 picomoles without signal ampilication.

PCR free multiple ligase reactions and probe cleavages for the SNP detection of KRAS mutation with attomole sensitivity

A method to produce multiple ligated primers without PCR for a target DNA containing a single point mutation is presented.

l-cysteine induced manganese porphyrin electrocatalytic amplification with 3D DNA-Au@Pt nanoparticles as nanocarriers for sensitive electrochemical aptasensor

We successfully applied the novel l-cysteine (RSH) induced manganese porphyrin (MnTPP) electrocatalytic amplification in electrochemical aptasensor for detection of thrombin (TB) with the 3D DNA-Au@Pt nanoparticles (DNA-Au@Pt NPs) as nanocarrier. A further discussion for the suggested mechanism of the reaction involved the MnTPP-catalyzed oxidation of thiols (RSH) to disulfides l-cystine (RSSR) was also discussed in detail in this work. In comparison with traditional H2O2 mediated MnTPP electrocatalytic amplification, the novel reaction with more stable catalytic substrate RSH possessed high catalytic amplification efficiency. In addition, the 3D DNA-Au@Pt NPs could provide abundant binding sites for immobilizing signal tags and enzymes. As a result, the electrochemical signal can be greatly enhanced by the RSH mediated MnTPP electrocatalytic reaction and 3D DNA-Au@Pt NPs. Under optimal conditions, the proposed aptasensor exhibited a wider linear range of 0.1 pM-100 nM with a more sensitive detection limit of 29 fM for TB detection.

Ultrasensitive and highly selective detection of bioaccumulation of methyl-mercury in fish samples via Ag⁰/Hg⁰ amalgamation

Methylmercury (CH3Hg(+)), the common organic source of mercury, is well-known as one of the most toxic compounds that is more toxic than inorganic or elemental mercury. In seabeds, the deposited Hg(2+) ions are converted into CH3Hg(+) by bacteria, where they are subsequently consumed and bioaccumulated in the tissue of fish, and finally, to enter the human diet, causing severe health problems. Therefore, sensitive and selective detection of bioaccumulation of CH3Hg(+) in fish samples is desirable. However, selective assay of CH3Hg(+) in the mercury-containing samples has been seriously hampered by the difficulty to distinguish CH3Hg(+) from ionic mercury. We report here that metal amalgamation, a natural phenomenon occurring between mercury atoms and certain metal atoms, combining with DNA-protected silver nanoparticles, can be used to detect CH3Hg(+) with high sensitivity and superior selectivity over Hg(2+) and other heavy metals. In our proposed approach, discrimination between CH3Hg(+) and Hg(2+) ions was realized by forming Ag/Hg amalgam with a CH3Hg(+)-specific scaffold. We have found that Ag/Hg amalgam can be formed on a CH3Hg(+)-specific DNA template between silver atoms and mercury atoms but cannot between silver atoms and CH3Hg(+). With a dye-labeled DNA strand, the sensor can detect CH3Hg(+) down to the picomolar level, which is >125-fold sensitive over Hg(2+). Moreover, the presence of 50-fold Hg(2+) and 10(6)-fold other metal ions do not interfere with the CH3Hg(+) detection. The results shown herein have important implications for the fast, easy, and selective detection and monitoring of CH3Hg(+) in environmental and biological samples.

Scaling up an electrochemical signal with a catalytic hairpin assembly coupling nanocatalyst label for DNA detection

A new strategy for the electrochemical detection of DNA based on catalytic hairpin assembly combined with nanocatalyst label-based redox cycling reaction signal amplification. A superior detection limit of 0.3 aM toward DNA was achieved.

Two-photon AgNP/DNA-TP dye nanosensing conjugate for biothiol probing in live cells

A novel silver nanoparticle (AgNP)/DNA-two-photon dye (TP dye) conjugate was fabricated as a two-photon nanoprobe for biothiol imaging in live cells. DNA-templated silver nanoparticles are efficient quenchers and also provide a biocompatible nanoplatform for facile delivery of DNA into living cells. In the presence of biothiols (Cys, Hcy, or GSH), the strong interaction between the thiol group and silver results in the release of TP dye-labeled single-stranded DNA (ssDNA) from the AgNP surface and the subsequent fluorescence emission of the TP dye, thus enabling biothiols to be assayed. Our results reveal that the AgNP/DNA-TP dye nanosensing conjugate not only is a robust, sensitive, and selective sensor for quantitative detection of biothiols in the complex biological environment but also can be efficiently delivered into live cells and act as a "signal-on" sensor for specific, high-contrast imaging of target biomolecules. Our design provides a methodology for the development of future DNA-templated silver nanoparticle-based two-photon fluorescent probes for use in vitro or in vivo as biomolecular sensors for live-cell imaging.

Ag nanoclusters as probes for turn-on fluorescence recognition of TpG dinucleotide with a high selectivity

CpG dinucleotide in DNA has a great tendency to mutate to TpG dinucleotide and this transition can cause some serious diseases. In this work, fluorescent Ag nanoclusters (Ag NCs) were employed as useful inorganic fluorophores for the potential of selectively discriminating TpG dinucleotide from CpG dinucleotide. Opposite the base Y of interest in YpG dinucleotide (Y=C or T), a bulge site was introduced so as to make the base Y to be unpaired and ready for Ag(+) binding. Such that the unpaired Y and context base pairs can provide a specific space suitable for creating fluorescent Ag NCs. We found that in comparison with CpG dinucleotide, TpG dinucleotide is much more efficient in growing fluorescent Ag NCs. Therefore, mutation of CpG dinucleotide to TpG can be identified by a turn-on fluorescence response and a high selectivity. More interestingly, Ag NCs exhibit a better performance in the TpG recognition over the other dinucleotides (Y=A and G) than the previously used organic fluorophores. Additionally, the effectiveness of the bulge site design in discriminating these dinucleotides was evidenced by control DNAs having the abasic site structure. We expect that a practical method for TpG dinucleotide recognition with a high selectivity can be developed using the bulge site-grown fluorescent Ag NCs as novel probes.

Emerging technologies for hybridization based single nucleotide polymorphism detection

Detection of single nucleotide polymorphisms (SNPs) is a crucial challenge in the development of a novel generation of diagnostic tools. Accurate detection of SNPs can prove elusive, as the impact of a single variable nucleotide on the properties of a target sequence is limited, even if this sequence consists of only a few nucleotides. New, accurate and facile strategies for the detection of point mutations are therefore absolutely necessary for the increased adoption of point-of-care molecular diagnostics. Currently, PCR and sequencing are mostly applied for diagnosing SNPs. However these methods have serious drawbacks as routine diagnostic tools because of their labour intensity and cost. Several new, more suitable methods can be applied to enable sensitive detection of mutations based on specially designed hybridization probes, mutation recognizing enzymes and thermal denaturation. Here, an overview is presented of the most recent advances in the field of fast and sensitive SNP detection assays with strong potential for integration in point-of-care tests.

Universal fluorescent tri-probe ligation equipped with capillary electrophoresis for targeting SMN1 and SMN2 genes in diagnosis of spinal muscular atrophy

This is the first ligase chain reaction used for diagnosis of spinal muscular atrophy (SMA). Universal fluorescent tri-probe ligation (UFTPL), a novel strategy used for distinguishing the multi-nucleotide alternations at single base, is developed to quantitatively analyze the SMN1/SMN2 genes in diagnosis of SMA. Ligase chain reaction was performed by adding three probes including universal fluorescent probe, connecting probe and recognizing probe to differentiate single nucleotide polymorphisms in UFTPL. Our approach was based on the two UFTPL products of survival motor neuron 1 (SMN1) and SMN2 genes (the difference of 9 mer) and analyzed by capillary electrophoresis (CE). We successfully determined various gene dosages of SMN1 and SMN2 genes in homologous or heterologous subjects. By using the UFTPL-CE method, the SMN1 and SMN2 genes were fully resolved with the resolution of 2.16±0.37 (n=3). The r values of SMN1 and SMN2 regression curves over a range of 1-4 copies were above 0.9944. Of the 48 DNA samples, the data of gene dosages were corresponding to that analyzed by conformation sensitive CE and denatured high-performance liquid chromatography (DHPLC). This technique was found to be a good methodology for quantification or determination of the relative genes having multi-nucleotide variants at single base.

A novel electrochemical aptasensor for highly sensitive detection of thrombin based on the autonomous assembly of hemin/G-quadruplex horseradish peroxidase-mimicking DNAzyme nanowires

In this work, a new signal amplified strategy was constructed based on isothermal exponential amplification reaction (EXPAR) and hybridization chain reaction (HCR) generating the hemin/G-quadruplex horseradish peroxidase-mimicking DNAzyme (HRP-mimicking DNAzyme) nanowires as signal output component for the sensitive detection of thrombin (TB). We employed EXPAR's ultra-high amplification efficiency to produce a large amount of two hairpin helper DNAs within a minutes. And then the resultant two hairpin helper DNAs could autonomously assemble the hemin/G-quadruplex HRP-mimicking DNAzymes nanowires as the redox-active reporter units on the electrode surface via hybridization chain reaction (HCR). The hemin/G-quadruplex structures simultaneously served as electron transfer medium and electrocatalyst to amplify the signal in the presence of H2O2. Specifically, only when the EXPAR reaction process has occurred, the HCR could be achieved and the hemin/G-quadruplex complexes could be formed on the surface of an electrode to give a detectable signal. The proposed strategy combines the amplification power of the EXPAR, HCR, and the inherent high sensitivity of the electrochemical detection. With such design, the proposed assay showed a good linear relationship within the range of 0.1 pM-50 nM with a detection limit of 33 fM (defined as S/N=3) for TB.

Detection of single-nucleotide polymorphisms using an ON-OFF switching of regenerated biosensor based on a locked nucleic acid-integrated and toehold-mediated strand displacement reaction

Although various strategies have been reported for single-nucleotide polymorphisms (SNPs) detection, development of a time-saving, specific, and regenerated electrochemical sensing platform still remains a realistic goal. In this study, an ON-OFF switching of a regenerated biosensor based on a locked nucleic acid (LNA)-integrated and toehold-mediated strand displacement reaction technique is constructed for detection of SNPs. The LNA-integrated and methylene blue-labeled capture probe with an external toehold is designed to switch on the sensing system. The mutant-type DNA probe completes complementary with the capture probe to trigger the strand displacement reaction, which switches off the sensing system. However, when the single-base mismatched wild-type DNA probe is presented, the strand displacement reaction cannot be achieved; therefore, the sensing system still keeps the ON state. This DNA sensor is stable over five reuses. We further testify that the LNA-integrated sequence has better recognition ability for SNPs detection compared to the DNA-integrated sequence. Moreover, this DNA senor exhibits a remarkable discrimination capability of SNPs among abundant wild-type targets and 6000-fold (m/m) excess of genomic DNA. In addition, it is selective enough in complex and contaminant-ridden samples, such as human urine, soil, saliva, and beer. Overall, these results demonstrate that this reliable DNA sensor is easy to be fabricated, simple to operate, and stable enough to be readily regenerated.

Time-resolved botulinum neurotoxin A activity monitored using peptide-functionalized Au nanoparticle energy transfer sensors

A peptide mimicking SNAP-25 was immobilized on Au nanoparticles for the monitoring of botulinum neurotoxin light chain A activity.

Localized surface plasmon resonance: a unique property of plasmonic nanoparticles for nucleic acid detection

Localized surface plasmon resonance (LSPR) of noble metal nanoparticles (a.k.a. plasmonic nanoparticles) opens up a new horizon for advanced biomolecule sensing. However, an effective and practical sensing system still requires meticulous design to achieve good sensitivity and distinctive selectivity for routine use and high-throughput detection. In particular, the detection of DNA and RNA is crucial in biomedical research and clinical diagnostics. This review describes the fundamental aspects of LSPR and provides an overall account of how it is exploited to assist in nucleic acid sensing. The detection efficiency of each LSPR-based approach is assessed with respect to the assay design, the selection of plasmonic nanoparticles, and the choice of nucleic acid probes which influence the duplex hybridization. Judicious comparison is made among various LSPR-based approaches in terms of the assaying time, the sensitivity or lowest sensing concentration (i.e. limit of detection or LOD), and the single-base mismatch (SBM) selectivity.

Silver nanowire-based electrochemical immunoassay for sensing immunoglobulin G with signal amplification using strawberry-like ZnO nanostructures as labels

The quick development of nanoscience and nanotechnology has paved the way for ultrasensitive biosensing and analysis. In this work, an ultrasensitive electrochemical immunosensor was developed for the detection of human immunoglobulin G (IgG) by combining with a newly designed trace tag on a disposable immunosensor array. The array was prepared by immobilizing captured antibodies on ultralong Ag nanowires, whilst the trace tag was prepared by loading horseradish peroxidase (HRP)-labeled goat anti-human IgG (HRP-anti-IgG) on thionine (TH)-doped mesoporous ZnO nanostrawberries (MP-ZnO). With a sandwich-type immunoassay format, mainly due to crystalline framework and high surface area of the mesoporous (MP) materials, as well as the superconductivity of silver nanowires, the electrochemical signal was significantly amplified. The linear range of the developed immunosensor is 0.01-200 ng mL(-1) and the detection limit is 4 pg mL(-1) IgG, which make the hierarchically nanostructured composites very promising candidates for the next-generation sandwich-type electrochemical immunoassays.

Highly sensitive multiplexed DNA detection using multi-walled carbon nanotube-based multicolor nanobeacon

A highly sensitive and selective multi-walled carbon nanotube (MWCNT)-based multicolor fluorescent nanobeacon is developed for multiplexed analysis of DNA in homogeneous solution. In this work, three different dye-labeled DNA hairpins were adsorbed on MWCNTs surface via π-stacking, which brings the dyes and MWCNTs into close proximity and leads to the quenching of fluorescence of the dyes. When target DNAs were added to the solution, the target DNAs specifically hybridize with the probes to form stable DNA duplexes, which weakens the interactions between the probes and MWCNTs, and results in the fluorescence recovery of the dyes. By using three 15-mer DNA fragments as proof-of-principle analytes, the proposed method showed good analytical performance. The limits of detection obtained were in the range of 35-42 pM. Moreover, this method also exhibits an excellent ability to discriminate between single nucleotide polymorphisms.

A simple one-step assay platform based on fluorescence quenching of macroporous silicon

We synthesized 3D macroporous silicon through a simple electrochemical dissolution process and systematically estimated its protein adsorption and effect on fluorescence emission. Compared with conventional 2D polystyrene plate, the macroporous silicon showed a superior protein adsorption capacity and significant fluorescence quenching effect. We developed a 3D macroporous silicon-based adenosine assay system through the following fabrication process: streptavidin molecules that have been immobilized on the surface of macroporous silicon are attached with biotin-linked and adenosine-specific DNA aptamer, followed by hybridization between the attached aptamer and fluorescent chemical (carboxytetramethylrhodamine/CTMR) that is conjugated with a short complementary DNA sequence. In the absence of adenosine, the aptamer-CTMR complexes remain closely attached to the surface of porous silicon, hence fluorescence being significantly quenched. Upon binding to adenosine, the DNA aptamer is subject to structure switching that leads to dissociation of CTMR from DNA aptamer, and consequently the CTMR fluorescence is restored, indicating a simple one-step assay of adenosine. Compared to the conventional 2D PS and ZnO nanorods-based assays, adenosine at much lower (sub-micromolar) concentration was successfully detected through the 3D macroporous silicon-based assay. The three-dimensionally and densely immobilized aptamer probes and effective fluorescence quenching on the surface of macroporous silicon enables adenosine to be detected at lower levels. Although the adenosine detection is reported here as a proof-of-concept, the developed macroporous silicon-based simple one-step assay platform can be applied in general to fluorescence quenching -based detection of many other biomolecules.

Highly selective detection of single-nucleotide polymorphisms using a quartz crystal microbalance biosensor based on the toehold-mediated strand displacement reaction

Toehold-mediated strand displacement reaction (SDR) is first introduced to develop a simple quartz crystal microbalance (QCM) biosensor without an enzyme or label at normal temperature for highly selective and sensitive detection of single-nucleotide polymorphism (SNP) in the p53 tumor suppressor gene. A hairpin capture probe with an external toehold is designed and immobilized on the gold electrode surface of QCM. A successive SDR is initiated by the target sequence hybridization with the toehold domain and ends with the unfolding of the capture probe. Finally, the open-loop capture probe hybridizes with the streptavidin-coupled reporter probe as an efficient mass amplifier to enhance the QCM signal. The proposed biosensor displays remarkable specificity to target the p53 gene fragment against single-base mutant sequences (e.g., the largest discrimination factor is 63 to C-C mismatch) and high sensitivity with the detection limit of 0.3 nM at 20 °C. As the crucial component of the fabricated biosensor for providing the high discrimination capability, the design rationale of the capture probe is further verified by fluorescence sensing and atomic force microscopy imaging. Additionally, a recovery of 84.1% is obtained when detecting the target sequence in spiked HeLa cells lysate, demonstrating the feasibility of employing this biosensor in detecting SNPs in biological samples.

Signal amplified strategy based on target-induced strand release coupling cleavage of nicking endonuclease for the ultrasensitive detection of ochratoxin A

In this work, a new signal amplified strategy based on target-induced strand release coupling cleavage of nicking endonuclease for the ultrasensitive detection of ochratoxin A (OTA) is reported. OTA aptamer (DNA1) and OTA aptamer complementary (DNA2) were immobilized onto a magnetic bead (MB). In the presence of OTA, DNA2 was dissociated and released from the MB. The released DNA2 then hybridized with DNA3, which was linked at the 5' terminus of the amplification template and can extend along the template in the presence of Phi 29 DNA polymerase. The formed double-stranded DNA was cleaved by nicking endonuclease Nb.BbvCI and produced a short single-stranded DNA. The cleaved DNA strand generated a new site by Phi 29 DNA polymerase and the process of extension and cleavage was cyclical. Thus, a amount of the short single-stranded DNA were produced. Using DNA and ABEI labeled carboxylic silica nanoparticles chemiluminescence (CL) probe, the short single-stranded DNA could be sensitively detected. The CL intensity (ΔI) versus the concentration of OTA was linear in the range from 1.0×10(-12) to 5.0×10(-8)g mL(-1). The detection limit was 3.0×10(-13)g mL(-1), and the RSD was 3.4% at 1.0×10(-10)g mL(-1) (n=7). The developed method has been applied to detect OTA in naturally contaminated wheat samples. Due to its simplicity, sensitivity and no need of specific recognition of aptamer for cleavage, this CL bioassay offers a promising approach for the detection of OTA and other biomolecules.

Gold nanoparticle fluorescent molecular beacon for low-resolution DQ2 gene HLA typing

Coeliac disease is an inflammation of the small intestine triggered by gluten ingestion. We present a fluorescent genosensor, exploiting molecular-beacon-functionalized gold nanoparticles, for the identification of human leukocyte antigen (HLA) DQ2 gene, a key genetic factor in coeliac disease. Optimization of sensor performance was achieved by tuning the composition of the oligonucleotide monolayer immobilized on the gold nanoparticle and the molecular beacon design. Co-immobilization of the molecular beacon with a spacing oligonucleotide (thiolated ten-thymine oligonucleotide) in the presence of ten-adenine oligonucleotides resulted in a significant increase of the sensor response owing to improved spacing of the molecular beacons and extension of the distance from the nanoparticle surface, which renders them more available for recognition. Further increase in the response (approximately 40%) was shown to be achievable when the recognition sequence of the molecular beacon was incorporated in the stem. Improvement of the specificity of the molecular beacons was also achieved by the incorporation within their recognition sequence of a one-base mismatch. Finally, gold nanoparticles functionalized with two molecular beacons targeting the DQA1*05* and DQB1*02* alleles allowed the low-resolution typing of the DQ2 gene at the nanomolar level.

DNA abasic site-directed formation of fluorescent silver nanoclusters for selective nucleobase recognition

DNA single-nucleotide polymorphism (SNP) detection has attracted much attention due to mutation related diseases. Various methods for SNP detection have been proposed and many are already in use. Here, we find that the abasic site (AP site) in the DNA duplex can be developed as a capping scaffold for the generation of fluorescent silver nanoclusters (Ag NCs). As a proof of concept, the DNA sequences from fragments near codon 177 of cancer supression gene p53 were used as a model for SNP detection by in situ formed Ag NCs. The formation of fluorescent Ag NCs in the AP site-containing DNA duplex is highly selective for cytosine facing the AP site and guanines flanking the site and can be employed in situ as readout for SNP detection. The fluorescent signal-on sensing for SNP based on this inorganic fluorophore is substantially advantageous over the previously reported signal-off responses using low-molecular-weight organic ligands. The strong dependence of fluorescent Ag NC formation on the sequences surrounding the AP site was successfully used to identify mutations in codon 177 of cancer supression gene p53. We anticipate that this approach will be employed to develop a practical SNP detection method by locating an AP site toward the midway cytosine in a target strand containing more than three consecutive cytosines.

Multiplex detection of endonucleases by using a multicolor gold nanobeacon

A highly sensitive and selective assay based on a novel enzyme-responsive multicolor gold nanobeacon has been developed for the multiplex detection of endonucleases, a group of very important nucleases. The nanobeacon takes advantage of the high specificity of DNA cleavage reactions combined with the unique fluorescence-quenching property of gold nanoparticles (AuNPs). To prepare the nanobeacon, three hairpin DNA reporters, each labeled at the 5' terminus with a fluorescent dye (i.e., fluorescein amidite (FAM), carboxy-X-rhodamine (ROX), cyanine dye (Cy5)), that respond to one of three different endonucleases are co-assembled at the surface of AuNPs (15 nm). This assembly brings the dyes into very close proximity with the AuNP, which leads to significant quenching of the fluorescence due to the nanosurface energy-transfer (NSET) effect. When the nanobeacon is exposed to the targeted endonucleases, specific DNA cleavage occurs and pieces of DNA fragments are released from the AuNP surface along with the fluorescent dye, which results in the fluorescence recovery that provides the basis for a quantitative measurement of endonuclease activity. Three endonucleases, namely HaeIII, EcoRI, and EcoRV, were studied as the proof-of-concept analytes. These endonucleases in homogeneous mixture solutions were simultaneously quantified by the proposed assay with high sensitivity and specificity. The limits of detection obtained were in the range of 5.0×10(-4)  U mL(-1) to 1.0×10(-3)  U mL(-1) of endonuclease; these limits are at least 100 times more sensitive than the previously reported endonuclease assays. Endonuclease inhibitors impair the DNA cleavage, so it is anticipated that the present method has great potential for screening inhibitors of endonucleases. To demonstrate this application, the inhibitory effects of certain anticancer drugs on HaeIII, EcoRI, and EcoRV activities were studied. The present protocol proved to be sensitive, reliable, and easy to carry out.

A simple and sensitive fluorescent sensing platform for Hg²+ ions assay based on G-quenching

In this work, a novel fluorescence biosensor was demonstrated for detection of Hg(2+) ions with relatively high selectivity and sensitivity. The sensing scheme was based on G-quenching induced by Hg(2+) ions. In the presence of Hg(2+) ions, the single-stranded signal probe which has carboxylfluorescein (FAM) and guanine segment at its 5' and 3' ends, respectively, folded into duplex-like structure via the Hg(2+)-mediated coordination of T-Hg(2+)-T base pairs. It brought guannine segment close to the dye and caused a remarkable decrease of fluorescence signal. The sensor showed a sensitive response to Hg(2+) ions in a concentration range from 0.5 to 10 μM, and a detection limit of 0.5 nM was given. This homogeneous system required only a single-labeled oligonucleotide, operated by concise procedures, and possessed comparable sensitivity as previous approaches. Furthermore, the sensor exhibits a great perspective for future practical applications.