Parallel G-quadruplex-specific fluorescent probe for monitoring DNA structural changes and label-free detection of potassium ion

Fluorescence based metabisulfite sensing: New aspects of ion sensing by a styryl benzothiazolium dye and understanding nitrite interference

Detection of specific ions using fluorescent probes has relevance in several areas of therapeutics development and environmental science. Here, we provide new perspectives to the sensing of a styryl benzothiazolium-based fluorescent compound 1 and report that sensing properties are for sulfite ions in general with highest preference for metabisulfite ions (S2O52-) adding to its previously determined role as a bisulfite ion sensor. This probe exhibits its sensing action via an addition reaction in which the styryl double bond gets reduced. The interference studies highlighted that the sequence of addition of nitrite and metabisulfite has a bearing on the overall interference outcome. Spectroscopic studies revealed that the order of preferential sensing of sulfites and sulfide ion is S2O52- > HSO3- > SO32- > S2-. Although this probe displays robust sensing on its own through fluorescence quenching, its fluorescence emission can be enhanced at much lower concentrations in the presence of a G-quadruplex DNA without compromising the outcome of the sensing.

Programmable Aggregation of Self-Assembled DNA Constructs

Biomolecular aggregates ensure the optimum concentration and proximity required for biochemical processes to take place. Synthetic aggregating systems are becoming increasingly essential to study/mimic dynamic condensates in nature. Herein the ratiometric DNA aggregation of self-assembled DNA constructs using lanthanide salts is reported. In addition, the aggregation is shown to be reversed by the addition of specific lanthanide-binding ligands. The aggregate formation is confirmed by dynamic light scattering experiment, electrophoretic mobility shift assay, and field emission scanning electron microscope. This programmed DNA aggregation and its reversion are applied to evaluating the lanthanide-DNA and lanthanide-ligand binding constants, respectively. To achieve this, Forster resonance energy transfer (FRET) pair dyes at the 3' or 5' end of the DNA strands are strategically placed that generate unique fluorescence patterns upon interaction with the DNA constructs and different triggers such as lanthanides/ligands/monovalent cations, thus enabling the tracking of various states of binding. It also demonstrates a "fast method" to form and stabilize G-quadruplex (GQ) using lanthanides which complements the existing slow formation of GQs with Na+/K+ ions. The formation of GQ by lanthanides is corroborated by FRET, circular dichroism (CD), and enzyme linked immunosorbent assay (ELISA) experiments. These DNA constructs, formed by lanthanides, have shown resistance to cleavage by DNase I, and distinctive binding to Protoporphyrin dyes and Thioflavin T.

A Cyanine Dye for Highly Specific Recognition of Parallel G-Quadruplex Topology and Its Application in Clinical RNA Detection for Cancer Diagnosis

G-quadruplex (G4), an unconventional nucleic acid structure, shows polymorphism in its topological morphology. The parallel G4 topology is the most prevalent form in organisms and plays a regulatory role in many biological processes. Designing fluorescent probes with high specificity for parallel G4s is important but challenging. Herein, a supramolecular assembly of the anionic cyanine dye SCY-5 is reported, which selectively identifies parallel G4 topology. SCY-5 can clearly distinguish parallel G4s from other G4s and non-G4s, even including hybrid-type G4s with parallel characteristics. The high specificity mechanism of SCY-5 involves a delicate balance between electrostatic repulsion and π-π interaction between SCY-5 and G4s. Using SCY-5, cellular RNA extracted from peripheral venous blood was quantitatively detected, and a remarkable increase in RNA G4 content in cancer patients compared to healthy volunteers was confirmed for the first time. This study provides new insights for designing specific probes for parallel G4 topology and opens a new path for clinical cancer diagnosis using RNA G4 as a biomarker.

Photodynamic-Assisted Electrochemiluminescence Enhancement toward Advanced BODIPY for Precision Diagnosis of Parkinson

Nowadays, signal enhancement is imperative to increase sensitivity of advanced ECL devices for expediting their promising applications in clinic. In this work, photodynamic-assisted electrochemiluminescence (PDECL) device was constructed for precision diagnosis of Parkinson, where an advanced emitter was prepared by electrostatically linking 2,6-dimethyl-8-(3-carboxyphenyl)4,4'-difluoroboradiazene (BET) with 1-butyl-3-methylimidazole tetrafluoroborate ([BMIm][BF4]). Specifically, protoporphyrin IX (PPIX) can trigger the photodynamic reaction under light irradiation with a wavelength of 450 nm to generate lots of singlet oxygen (1O2), showing a 2.43-fold magnification in the ECL responses. Then, the aptamer (Apt) was assembled on the functional BET-[BMIm] for constructing a "signal off" ECL biosensor. Later on, the PPIX was embedded into the G-quadruplex (G4) of the Apt to magnify the ECL signals for bioanalysis of α-synuclein (α-syn) under light excitation. In the optimized surroundings, the resulting PDECL sensor has a broad linear range of 100.0 aM ∼ 10.0 fM and a low limit of detection (LOD) of 63 aM, coupled by differentiating Parkinson patients from normal individuals according to the receiver operating characteristic (ROC) curve analysis of actual blood samples. Such research holds great promise for synthesis of other advanced luminophores, combined with achieving an early clinical diagnosis.

A responsive disulfide bond switch aptamer prodrug exhibiting enhanced stability and anticancer efficacy

Aptamers have shown significant potential in treating diverse diseases. However, challenges such as stability and drug delivery limited their clinical application. In this paper, the development of AS1411 prodrug-type aptamers for tumor treatment was introduced. A Short oligonucleotide was introduced at the end of the AS1411 sequence with a disulfide bond as responsive switch. The results indicated that the aptamer prodrugs not only enhanced the stability of the aptamer against nuclease activity but also facilitated binding to serum albumin. Furthermore, in the reducing microenvironment of tumor cells, disulfide bonds triggered drug release, resulting in superior therapeutic effects in vitro and in vivo compared to original drugs. This paper proposes a novel approach for optimizing the structure of nucleic acid drugs, that promises to protect other oligonucleotides or secondary structures, thus opening up new possibilities for nucleic acid drug design.

Distinguishing the responsive mechanisms of fluorescent probes to hydrogen peroxide, proteins, and DNA/RNA

The responsive mechanisms of cationic quinolinium-vinyl-N,N-dimethylaniline boronate (QVD-B) derivative probes to hydrogen peroxide (H2O2), proteins and DNA/RNA are theoretically investigated in this study. The potential energy curves of QVD-B scanned on a dihedral angle (N+-C-CC) in the first singlet (S1) state exhibit large torsional energy barriers. Additionally, the energy of the lowest unoccupied molecular orbital (LUMO) of an acceptor moiety (-3.14 eV) is lower than that of a donor moiety (-1.13 eV) in QVD-B. This demonstrates that photoinduced electron transfer (PET) quenches the fluorescence of QVD-B, as opposed to the previous report of intramolecular single-bond rotation. After reacting with H2O2, the reaction product of quinoline-vinyl-N,N-dimethylaniline (QVD) turns off the PET pathway and turns on the fluorescence at 550 nm, which is consistent with the experimental results (580 nm). Among the possible configurations of QVD-B that forms with proteins and DNA, the calculated fluorescence values of corresponding twisted QVD-B-P (638 nm) and QVD-B-D (686 nm) are consistent with the experimental results (632 and 688 nm). The frontier molecular orbital and electron-hole analysis show that the charge transfer distance follows the order of QVD (1.88 Å) < QVD-B-P (4.49 Å) < QVD-B-D (6.39 Å), which induces the fluorescence red-shifts of QVD-B-P and QVD-B-D compared to that of QVD. The multi-detection mechanism of the fluorescent probe QVD-B is attributed to PET progress and different degrees of local charge transfer after photoexcitation.

Recent Advances in Fluorescent Probes for G-quadruplex DNAs / RNAs

Guanine-quadruplexes (G4s) are high-level structures formed by the folding of guaninerich nucleic acid sequences. G4s play important roles in various physiological processes, such as gene transcription, replication, recombination, and maintenance of chromosomal stability. Specific and sensitive monitoring of G4s lays the foundation for further understanding the structure, content, distribution, and function of G4s in organisms, which is important for the treatment and diagnosis of diseases. Moreover, visualization of G4s will provide new ideas for developing antitumor strategies targeting G4s. The design and development of G4-specific ligands are challenging due to the subtle differences in the structure of G4s. This review focuses on the progress of research on G4 fluorescent probes and their binding mechanisms to G4s. Finally, the challenges and future prospects for better detection and targeting of G4s in different organisms are discussed. This paper provides ideas for the development of novel G4 fluorescent probes.

Ratiometric Detection of Zn2+ Using DNAzyme-Based Bioluminescence Resonance Energy Transfer Sensors

While fluorescent sensors have been developed for monitoring metal ions in health and diseases, they are limited by the requirement of an excitation light source that can lead to photobleaching and a high autofluorescence background. To address these issues, bioluminescence resonance energy transfer (BRET)-based protein or small molecule sensors have been developed; however, most of them are not highly selective nor generalizable to different metal ions. Taking advantage of the high selectivity and generalizability of DNAzymes, we report herein DNAzyme-based ratiometric sensors for Zn2+ based on BRET. The 8-17 DNAzyme was labeled with luciferase and Cy3. The proximity between luciferase and Cy3 permiQed BRET when coelenterazine, the substrate for luciferase, was introduced. Adding samples containing Zn2+ resulted in a cleavage of the substrate strand, causing dehybridization of the DNAzyme construct, thus increasing the distance between Cy3 and luciferase and changing the BRET signals. Using these sensors, we detected Zn2+ in serum samples and achieved Zn2+ detection with a smartphone camera. Moreover, since the BRET pair is not the component that determines the selectivity of the sensors, this sensing platform has the potential to be adapted for the detection of other metal ions with other metal-dependent DNAzymes.

Advances and Trends in miRNA Analysis Using DNAzyme-Based Biosensors

miRNAs are endogenous small, non-coding RNA molecules that function in post-transcriptional regulation of gene expression. Because miRNA plays a pivotal role in maintaining the intracellular environment, and abnormal expression has been found in many cancer diseases, detection of miRNA as a biomarker is important for early diagnosis of disease and study of miRNA function. However, because miRNA is present in extremely low concentrations in cells and many types of miRNAs with similar sequences are mixed, traditional gene detection methods are not suitable for miRNA detection. Therefore, in order to overcome this limitation, a signal amplification process is essential for high sensitivity. In particular, enzyme-free signal amplification systems such as DNAzyme systems have been developed for miRNA analysis with high specificity. DNAzymes have the advantage of being more stable in the physiological environment than enzymes, easy to chemically synthesize, and biocompatible. In this review, we summarize and introduce the methods using DNAzyme-based biosensors, especially with regard to various signal amplification methods for high sensitivity and strategies for improving detection specificity. We also discuss the current challenges and trends of these DNAzyme-based biosensors.

A cyanine dye probe for K+ detection based on DNA construction of G-quadruplex

Potassium ion (K⁺) plays an important role in the maintenance of cellular biological process for human health. Thus, the detection of K⁺ is very important. Here, based on the interaction between thiamonomethinecyanine dye and G-quadruplex formation sequence (PW17), K⁺ detection spectrum was characterized by UV-Vis spectrometry. The single-stranded sequence of PW17 can fold into G-quadruplex in the presence of K⁺. PW17 can induce a dimer-to-monomer transition of the absorption spectrum of cyanine dyes. This method shows high specificity against some other alkali cations, even at high concentrations of Na⁺. Further, this detection strategy can realize the detection of K⁺ in tap water.

Study on the Interaction of a Peptide Targeting Specific G-Quadruplex Structures Based on Chromatographic Retention Behavior

G-quadruplexes (G4s) are of vital biological significance and G4-specific ligands with conformational selectivity show great application potential in disease treatment and biosensing. RHAU, a RNA helicase associated with AU-rich element, exerts biological functions through the mediation of G4s and has been identified to be a G4 binder. Here, we investigated the interactions between the RHAU peptide and G4s with different secondary structures using size exclusion chromatography (SEC) in association with circular dichroism (CD), ultraviolet-visible (UV-Vis) absorption, and native polyacrylamide gel electrophoresis (Native-PAGE). Spectral results demonstrated that the RHAU peptide did not break the main structure of G4s, making it more reliable for G4 structural analysis. The RHAU peptide was found to display a structural selectivity for a preferential binding to parallel G4s as reflected by the distinct chromatographic retention behaviors. In addition, the RHAU peptide exhibited different interactions with intermolecular parallel G4s and intramolecular parallel G4s, providing a novel recognition approach to G4 structures. The findings of this study enriched the insight into the binding of RHAU to G4s with various conformations. It is noteworthy that SEC technology can be easy and reliable for elucidating G4-peptide interactions, especially for a multiple G4 coexisting system, which supplied an alternative strategy to screen novel specific ligands for G4s.

Discriminating between Parallel, Anti-Parallel and Hybrid G-Quadruplexes: Mechanistic Details on Their Binding to Small Molecules

G-quadruplexes (G4) are now extensively recognised as a peculiar non-canonical DNA geometry that plays a prime importance role in processes of biological relevance whose number is increasing continuously. The same is true for the less-studied RNA G4 counterpart. G4s are stable structures; however, their geometrical parameters may be finely tuned not only by the presence of particular sequences of nucleotides but also by the salt content of the medium or by a small molecule that may act as a peculiar topology inducer. As far as the interest in G4s increases and our knowledge of these species deepens, researchers do not only verify the G4s binding by small molecules and the subsequent G4 stabilisation. The most innovative studies now aim to elucidate the mechanistic details of the interaction and the ability of a target species (drug) to bind only to a peculiar G4 geometry. In this focused review, we survey the advances in the studies of the binding of small molecules of medical interest to G4s, with particular attention to the ability of these species to bind differently (intercalation, lateral binding or sitting atop) to different G4 topologies (parallel, anti-parallel or hybrid structures). Some species, given the very high affinity with some peculiar G4 topology, can first bind to a less favourable geometry and then induce its conversion. This aspect is also considered.

A novel fluorescence method for detection of phosphate anions based on porphyrin metalation

In this work, a novel fluorescence method for the detection of phosphate anions (PO₄^3-) was developed based on porphyrin metalation. Through catalysis by G-quadruplex (G4), Cu²⁺ could insert into the porphyrins to quench their fluorescence. G4 simultaneously improved the fluorescence of the porphyrins but not that of Cu²⁺-porphyrin. In the absence of PO₄^3-, the porphyrins were metallized by Cu²⁺, and no fluorescence was observed. In the presence of PO₄^3-, PO₄^3- could coordinate with Cu²⁺ to prevent porphyrin metalation. Free porphyrin could bind with G4 to emit strong fluorescence. By comparing four common porphyrins, we found that G4 had the greatest effect on increasing the fluorescence intensity of N-methylmesoporphyrin IX (NMM). Thus, NMM/G4 was chosen for the design of a biosensor. Under optimal experimental conditions, this method showed high sensitivity and satisfactory selectivity for PO₄^3- with a detection limit of 44 nM in a linear range of 0.01-1.0 μM. The recovery experiments showed recovery rates of 93.75-106.00%, suggesting a great potential for measuring PO₄^3- in real samples.

A smart microhydrogel membrane sensor realized by pipette tip

In this paper, we describe a simple and practical way to prepare hydrogel membranes in a conical channel (pipette tip). We used a pipette to create a gas pressure difference on both sides of the gel precursor, which drove the gel precursor to move in the pipette tip. During movement, the shape of the hydrogel precursor gradually becomes thinner as the radius of the tapered channel becomes larger. We use this principle to realize the highly controllable preparation of the hydrogel membrane structure (130 μm at its thinnest). Moreover, we fabricated a hydrogel membrane sensor in one step by implanting smart molecules in the hydrogel, which achieved rapid and sensitive detection of 0.5 μM-500 mM potassium ions. This method of preparing the hydrogel membrane sensor does not rely on professional membrane production equipment and complex molecular design processes, has high gel utilization and simple and controllable membrane thickness, and has a wide range of application value in the field of intelligent hydrogel-based analysis technology.

A Guanosine-Quadruplex Hydrogel as Cascade Reaction Container Consuming Endogenous Glucose for Infected Wound Treatment-A Study in Diabetic Mice

Diabetic foot ulcers infected with antibiotic-resistant bacteria form a severe complication of diabetes. Antimicrobial-loaded hydrogels are used as a dressing for infected wounds, but the ongoing rise in the number of antimicrobial-resistant infections necessitates new, nonantibiotic based designs. Here, a guanosine-quadruplex (G4 )-hydrogel composed of guanosine, 2-formylphenylboronic acid, and putrescine is designed and used as a cascade-reaction container. The G4 -hydrogel is loaded with glucose-oxidase and hemin. The first cascade-reaction, initiated by glucose-oxidase, transforms glucose and O2  into gluconic acid and H2 O2 . In vitro, this reaction is most influential on killing Staphylococcus aureus or Pseudomonas aeruginosa in suspension, but showed limited killing of bacteria in biofilm-modes of growth. The second cascade-reaction, however, transforming H2 O2  into reactive-oxygen-species (ROS), also enhances killing of biofilm bacteria due to hemin penetration into biofilms and interaction with eDNA G-quadruplexes in the biofilm matrix. Therewith, the second cascade-reaction generates ROS close to the target bacteria, facilitating killing despite the short life-time of ROS. Healing of infected wounds in diabetic mice proceeds faster upon coverage by these G4 -hydrogels than by clinically common ciprofloxacin irrigation. Moreover, local glucose concentrations around infected wounds decrease. Concluding, a G4 -hydrogel loaded with glucose-oxidase and hemin is a good candidate for infected wound dressings, particularly in diabetic patients.

A fluorescent molecular rotor for the selective detection of the hybrid-conformation 22AG G-Quadruplex

G-quadruplex (G4) DNA plays a vital role in myriad biological process and is linked to several human diseases, including Alzheimer's disease. Probing G4s with fluorescent probes can provide a better understanding their mechanisms of action and of their roles in Nature. In this study we developed a quinolinium-vinylaniline molecular rotor probe, featuring a diethylaminosalicylaldehyde unit that could discriminate the hybrid-22AG G4 sequence selectively amongst other G4 sequences. This probe underwent a significant red-shift upon binding to the target G4 (broad 575 nm → sharp 630 nm) with enhanced fluorescence (up to 14-fold). We suspect that the vinylaniline unit of the molecular rotor, when bound to the hybrid-22 A G4, experienced restricted rotation, thereby undergoing enhanced intramolecular charge transfer. The presence of the diethylaminosalicylaldehyde moiety appeared to play a major role in the enhanced selectivity toward the 22AG G4.

Construction of a Degradation-Free DNA Conjugated Nanoprobe and Its Application in Rapid Field Screening for Sulfur Mustard

Sulfur mustard (SM) is a notorious blistering chemical warfare agent. Rapid field screening for trace SM is of vital significance for the detection of antiterrorism and timely treatment. Here, a visual assay for SM was constructed on the basis of its inhibition for the G-quadruplexes/hemin DNAzyme. Specifically, multiple guanine (G)-rich single stranded oligonucleotides (ssODN) named S1 (80% of G in the total bases), i.e., the precursor for G-quadruplex, which could oxide tetramethylbenzidine (TMB) to its green product, were conjugated on the nonfouling polymer brush grafted magnetic beads (MB@P(C-H)). SM could specifically alkylate the N7 and O6 sites of G in the S1; thus, it failed to form the DNAzyme based signal reporter. It was demonstrated that the nonfouling P(C-H) interface on the magnetic bead (MB) could protect the conjugated ssODN from nuclease degradation, thus ensuring its well sensing performance in complex samples. Under the optimized conditions, this method achieved good sensitivity and selectivity with a limit of detection (LOD) as low as 0.26 μmol L^-1, and the recoveries ranging from 86% to 117% were obtained for different SM spiked real samples. Above all, this method combining low cost and ready operation could be suited for rapid field SM screening in a wide range of environmental matrices.

Recent advances of fluorescent biosensors based on cyclic signal amplification technology in biomedical detection

The cyclic signal amplification technology has been widely applied for the ultrasensitive detection of many important biomolecules, such as nucleic acids, proteins, enzymes, adenosine triphosphate (ATP), metal ions, exosome, etc. Due to their low content in the complex biological samples, traditional detection methods are insufficient to satisfy the requirements for monitoring those biomolecules. Therefore, effective and sensitive biosensors based on cyclic signal amplification technology are of great significance for the quick and simple diagnosis and treatment of diseases. Fluorescent biosensor based on cyclic signal amplification technology has become a research hotspot due to its simple operation, low cost, short time, high sensitivity and high specificity. This paper introduces several cyclic amplification methods, such as rolling circle amplification (RCA), strand displacement reactions (SDR) and enzyme-assisted amplification (EAA), and summarizes the research progress of using this technology in the detection of different biomolecules in recent years, in order to provide help for the research of more efficient and sensitive detection methods.

Advanced Raman Spectroscopy Detection of Oxidative Damage in Nucleic Acid Bases: Probing Chemical Changes and Intermolecular Interactions in Guanosine at Ultralow Concentration

DNA/RNA synthesis precursors are especially vulnerable to damage induced by reactive oxygen species occurring following oxidative stress. Guanosine triphosphates are the prevalent oxidized nucleotides, which can be misincorporated during replication, leading to mutations and cell death. Here, we present a novel method based on micro-Raman spectroscopy, combined with ab initio calculations, for the identification, detection, and quantification of oxidized nucleotides at low concentration. We also show that the Raman signature in the terahertz spectral range (<100 cm^-1) contains information on the intermolecular assembly of guanine in tetrads, which allows us to further boost the oxidative damage detection limit. Eventually, we provide evidence that similar analyses can be carried out on samples in very small volumes at very low concentrations by exploiting the high sensitivity of surface-enhanced Raman scattering combined with properly designed superhydrophobic substrates. These results pave the way for employing such advanced spectroscopic methods for quantitatively sensing the oxidative damage of nucleotides in the cell.

Highly Selective Detection of K+ Based on a Dimerized G-Quadruplex DNAzyme

Potassium ion (K⁺) plays a crucial role in biological systems, such as maintaining cellular processes and causing diseases. However, specifically, the detection of K⁺ is extremely challenging because of the coexistence of the chemically similar ion of Na⁺ under physiological conditions. In this work, a K⁺ specific biosensor is constructed on the basis of a dimerized G-quadruplex (GQ) DNA, which is promoted by K⁺, and the enzymatic activity of the resulting DNAzyme depends on the concentration of the K⁺. The K⁺ in a 1-200 mM concentration range can be selectively detected by visual color, UV-Vis absorbance or fluorescence even if the concentration of the accompanying Na⁺ is up to 140 mM at an ambient condition up to 45 °C. In addition, this system can also be used to selectively detect NH₄⁺ in a 5-200 mM concentration range. This dimerized DNAzyme offers a new type of biosensor with a potential application in the biological system.

Fluorescence and electrochemical assay for bimodal detection of lead ions based on Metal-Organic framework nanosheets

The accurate measurement of heavy metal ions is essential for human health and environmental protection. Here, we report the design of a simple and convenient bimodal strategy for signal-on, label-free lead ion detection in environmental samples based on two-dimensional metal-organic framework (2D-MOF) nanosheets. 2D-MOFs have different affinities toward guanine-rich DNA (ssGDNA) and the G-quadruplex, allowing these structures to be distinguished. The nanosheets were also used as quenchers for fluorescent lead ion detection. Using lead ions to induce G-quadruplex formation from ssGDNA, a simple fluorescence resonance energy transfer (FRET) strategy was developed for lead ion detection; the detection limit was 3.3 nM. Based on changes in the GDNA configuration, the FRET system was converted into an electrochemical sensor for lead ion assays using an electrode modified with the 2D-MOF nanosheets. Electrochemical impedance spectroscopy showed a high sensitivity and a low limit of detection (i.e., 8.7 pM) of the electrode. The adaptability of the bimodal mechanism was verified through the successful detection of lead ions in tap water and fertilizer samples, and the method accuracy was demonstrated through inductively coupled plasma analysis. The developed bimodal device is cost-effective, highly sensitive, and allows for convenient operation, thereby rendering it a promising and reliable system for the detection of lead ions in environmental samples.

Aptamer-Driven Toxin Gene Delivery in U87 Model Glioblastoma Cells

A novel suicide gene therapy approach was tested in U87 MG glioblastoma multiforme cells. A 26nt G-rich double-stranded DNA aptamer (AS1411) was integrated into a vector at the 5' of a mammalian codon-optimized saporin gene, under CMV promoter. With this plasmid termed "APTSAP", the gene encoding ribosome-inactivating protein saporin is driven intracellularly by the glioma-specific aptamer that binds to cell surface-exposed nucleolin and efficiently kills target cells, more effectively as a polyethyleneimine (PEI)-polyplex. Cells that do not expose nucleolin at the cell surface such as 3T3 cells, used as a control, remain unaffected. Suicide gene-induced cell killing was not observed when the inactive saporin mutant SAPKQ DNA was used in the (PEI)-polyplex, indicating that saporin catalytic activity mediates the cytotoxic effect. Rather than apoptosis, cell death has features resembling autophagic or methuosis-like mechanisms. These main findings support the proof-of-concept of using PEI-polyplexed APTSAP for local delivery in rat glioblastoma models.

Ratiometric fluorescent sensing of the parallel G-quadruplex produced by PS2.M: implications for K+ detection

Fluorescent ligands that selectively bind to a specific G-quadruplex (GQ) topology (antiparallel, hybrid or parallel) are highly sought after for aptasensor development and nanodevice construction. The coumarin-benzothiazole hybrid (BnBtC) is an internal charge transfer (ICT) ratiometric fluorescent probe, which displays two well-resolved emission bands at ∼450 nm for the coumarin component and ∼650 nm for the ICT band. The red ICT emission of BnBtC displays turn-on responses to protic solvent polarity and upon binding GQ structures, especially those produced by the hemin binding aptamer (PS2.M). In the present work, BnBtC was found to exhibit enhanced ICT emission upon binding the parallel GQ topology of PS2.M that is selectively produced in the presence of K+. This ability to discriminate K+ from other cationic metal ions through a turn-on ratiometric fluorescent response demonstrates the potential utility of the BnBtC probe for biosensor applications.

Porphyrins as Colorimetric and Photometric Biosensors in Modern Bioanalytical Systems

Advances in porphyrin chemistry have provided novel materials and exciting technologies for bioanalysis such as colorimetric sensor array (CSA), photo-electrochemical (PEC) biosensing, and nanocomposites as peroxidase mimetics for glucose detection. This review highlights selected recent advances in the construction of supramolecular assemblies based on the porphyrin macrocycle that provide recognition of various biologically important entities through the unique porphyrin properties associated with colorimetry, spectrophotometry, and photo-electrochemistry.

The Red Color of Life Transformed - Synthetic Advances and Emerging Applications of Protoporphyrin IX in Chemical Biology

Protoporphyrin IX (PPIX) is the porphyrin scaffold of heme b, a ubiquitous prosthetic group of proteins responsible for oxygen binding (hemoglobin, myoglobin), electron transfer (cytochrome c) and catalysis (cytochrome P450, catalases, peroxidases). PPIX and its metallated derivatives frequently find application as therapeutic agents, imaging tools, catalysts, sensors and in light harvesting. The vast toolkit of accessible porphyrin functionalization reactions enables easy synthetic modification of PPIX to meet the requirements for its multiple uses. In the past few years, particular interest has arisen in exploiting the interaction of PPIX and its synthetic derivatives with biomolecules such as DNA and heme-binding proteins to evolve molecular devices with new functions as well as to uncover potential therapeutic toeholds. This review strives to shine a light on the most recent developments in the synthetic chemistry of PPIX and its uses in selected fields of chemical biology.

Photocontrolled Dopamine Polymerization on DNA Origami with Nanometer Resolution

Temporal and spatial control over polydopamine formation on the nanoscale can be achieved by installing an irradiation-sensitive polymerization system on DNA origami. Precisely distributed G-quadruplex structures on the DNA template serve as anchors for embedding the photosensitizer protoporphyrin IX, which-upon irradiation with visible light-induces the multistep oxidation of dopamine to polydopamine, producing polymeric structures on designated areas within the origami framework. The photochemical polymerization process allows exclusive control over polydopamine layer formation through the simple on/off switching of the light source. The obtained polymer-DNA hybrid material shows significantly enhanced stability, paving the way for biomedical and chemical applications that are typically not possible owing to the sensitivity of DNA.

Translational Inhibition of α-Neurexin 2

Neurexins are extensively investigated presynaptic cell-adhesion molecules which play important roles in transmitting signals and processing information at synapses that connect neurons into a vast network of cellular communications. Synaptic transmission of information is a fast and dynamic process which relies on rapid and tight regulation of synaptic protein expression. However, the mechanism underlying those regulation is still not fully understood. Therefore, we explore how the expression of NRXN2α, one of encoding genes for neurexins, is regulated at the translational level. NRXN2α transcript has a long and conserved 5'-untranslated region (5'UTR) suggestive of the rapid regulation of protein expression at the translational level. We first demonstrate that the 5'UTR has negative effects on the expression of the NRXN2α and find a critical subregion responsible for the major inhibitory function. Then we identify a particular secondary structure of G-quadruplex in the 5'UTR. Moreover, we find that the synergistic roles of G-quadruplex and upstream AUGs are responsible for most of NRXN2α-5'UTR inhibitory effects. In conclusion, we uncovered 5' UTR of neurexin2 potentially inhibits neurexin2 translation by multiple mechanisms. In addition, this study underscores the importance of direct protein quantitation in experiments rather than using mRNA as an indirect estimate of protein expression.

Multicolorfully probing intramolecular G-Quadruplex tandem interface

A long guanine-rich oliogonucleotide sequence can form multiple G-quadruplex (G4) tandem individuals in a single molecule with internal G4-G4 (inG4-G4) interfaces. The interface can exist at the stacked (s-inG4-G4) or unstacked (us-inG4-G4) state, dependent of the G4 conformation and environment. Because of the vital bioactivity of the G4 interface state, there is a great demand for developing a reliable multicolor fluorescence method to identify the interface state using a fluorophore that can emit at the individual wavelength for a specific interface. Herein, we found that a porphyrin with four dihydroxyphenyl substituents (OH₂PP) can multicolorfully recognize the s-inG4-G4 dimer interface against the us-inG4-G4 dimer one. The s-inG4-G4 dimer cause significant red shifts in the excitation and emission bands of OH₂PP in contrast to the us-inG4-G4 dimer and G4 monomers. OH₂PP adopts a 1:1 binding mode with the s-inG4-G4 dimer, whereas a 2:1 binding mode occurs to the us-inG4-G4 dimer. The limit of detection (LOD) for the s-inG4-G4 structure is about tens of nM level. The observed binding dependence of OH₂PP on the linker length between the G4 individuals suggests the interface binding with the s-inG4-G4 dimer. Deformation of the porphyrin macrocycle within the s-inG4-G4 interface confinement most likely contributes to the multicolorful response with the hyperporphyrin effect. Our work demonstrates that OH₂PP is a promising fluorophore to fluorescently recognize the G4 multimer with an ideal interface-sensitive multicolor response.

Exploration of intramolecular split G-quadruplex and its analytical applications

Distinct from intermolecular split G-quadruplex (Inter-SG), intramolecular split G-quadruplex (Intra-SG) which could be generated in a DNA spacer-inserted G-quadruplex strand has not been systematically explored. Not only is it essential for the purpose of simplicity of DNA-based bioanalytical applications, but also it will give us hints how to design split G-quadruplex-based system. Herein, comprehensive information is provided about influences of spacer length and split mode on the formation of Intra-SG, how to adjust its thermodynamic stability, and selection of optimal Intra-SG for bioanalysis. For instances, non-classical Intra-SG (e.g. 2:10, 4:8 and 5:7) displays lower stability than classical split strands (3:9, 6:6 and 9:3), which is closely related to integrity of consecutive guanine tract; as compared to regular Intra-SG structures, single-thymine capped ones have reduced melting temperature, providing an effective approach to adjustment of stability. It is believed that the disclosed rules in this study will contribute to the effective application of split G-quadruplex in the field of DNA technology in the future.

Arginine-Induced Self-Assembly of Protoporphyrin to Obtain Effective Photocatalysts in Aqueous Media Under Visible Light

The fabrication of controlled supramolecular nanostructures via self-assembly of protoporphyrin IX (PPIX) was studied with enantiomerically pure l-arginine and d-arginine, and we have shown that stoichiometry controlled the morphology formed. The nanostructure morphology was mainly influenced by the delicate balance of π-π stacking interactions between PPIX cores, as well as H-bonding between the deprotonated acidic head group of PPIX with the guanidine head group of arginine. PPIX self-assembled with l-/d-arginine to create rose-like nanoflower structures for four equivalents of arginine that were 5–10 μm in length and 1–4 μm diameter. We employed UV-vis, fluorescence spectroscopy, scanning electron microscopy (SEM), X-ray diffraction (XRD), dynamic light scattering (DLS) and Fourier transform infrared spectroscopy (FT-IR) techniques to characterize the resulting self-assembled nanostructures. Furthermore, we investigated the catalytic activity of PPIX and arginine co-assembled materials. The fabricated PPIX–arginine nanostructure showed high enhancement of photocatalytic activity through degradation of rhodamine B (RhB) with a decrease in dye concentration of around 78–80% under simulated visible radiation.

A DNA Switch for Detecting Single Nucleotide Polymorphism within a Long DNA Sequence Under Denaturing Conditions

DNA detection is usually conducted under nondenaturing conditions to favor the formation of Watson-Crick base-paring interactions. However, although such a setting is excellent for distinguishing a single-nucleotide polymorphism (SNP) within short DNA sequences (15-25 nucleotides), it does not offer a good solution to SNP detection within much longer sequences. Here we report on a new detection method capable of detecting SNP in a DNA sequence containing 35-90 nucleotides. This is achieved through incorporating into the recognition DNA sequence a previously discovered DNA molecule that forms a stable G-quadruplex in the presence of 7 molar urea, a known condition for denaturing DNA structures. The systems are configured to produce both colorimetric and fluorescent signals upon target binding.

Polarity inversion sensitized G-quadruplex metal sensors with K+ tolerance

Due to the high abundance of K⁺ in environments and K⁺-induced high stability of G-quadruplex (G4), developing a selective G4-based fluorescent sensor for other metal ions with K⁺ tolerance is a great challenge. Herein, we found that even in the presence of 15000-fold excess of K⁺, Ba²⁺ exhibits a highly specific binding with a human telomeric G4 (htG4) in comparison with other G4-binding metal ions such as Pb²⁺ and Sr²⁺. This specific binding event can be recognized by a natural fluorophore of hypericin with a lighting-up fluorescence response. Interestingly, inverting the polarity of the most 3' G in htG4 can sensitize the Ba²⁺ response with the retaining Ba²⁺ specificity and K⁺ tolerance. This polarity inversion of htG4 causes a G4 conformation change in K⁺ and the polarity-inverted htG4 tends to favorably dimerize in response to the Ba²⁺ specific binding. To our knowledge, this is the first report that polarity inversion of G4 can be applied to construct a selective metal sensor with K⁺ tolerance. Our findings will open a new way to conveniently regulate the G4 conformation and stability by polarity inversion towards developing high-performance sensors.

Direct detection of potassium and lead (II) ions based on assembly-disassembly of a chiral cyanine dye /TBA complex

A highly selective and sensitive direct detection of potassium (K⁺) and lead (Pb²⁺) ions was developed by using the assembly and disassembly of a chiral cyanine dye/TBA complex. The dye DMSB (3-ethyl-2-[3-(3-ethyl-3H-benzoselenazol-2-ylidene)-2-methylprop-1-enyl] benzoselenazolium bromide) loses the ability of self-assembly, but it can be activated by thrombin-binding aptamer (TBA) G-quadruplex structure. And only the TBA G-quadruplex formed in the presence of K⁺, can strongly induce J-aggregate signals of DMSB. Because the Pb²⁺ ions can bind and stabilize the TBA G-quadruplex with much higher efficiency than K⁺, the J-aggregate signals of DMSB falls sharply when the Pb²⁺ is present. As a result, the assembly and disassembly of DMSB allows the selective detection of 10 μM K⁺ and 20 nM Pb²⁺ respectively, even the competitive sodium ion (Na⁺) was as high as 145 mM. The linear correlation existed between the J-aggregate intensity and the concentration of K⁺ and Pb²⁺ over the range of 0.5-5.0 mM and 200-2000 nM, respectively. Moreover, the concentration of K⁺ (∼3 mM) and Pb²⁺ (below 20 nM) in human blood serum samples were determined by the present method, which agreed well with inductively coupled plasma mass spectrometry (ICP-MS). This work not only opens a door for the further development of G-quadruplex-based aptasensor in complex real system, but also provides a simple and versatile sensing platform for ion detection in clinic.

G-Quadruplexes as An Alternative Recognition Element in Disease-Related Target Sensing

G-quadruplexes are made up of guanine-rich RNA and DNA sequences capable of forming noncanonical nucleic acid secondary structures. The base-specific sterical configuration of G-quadruplexes allows the stacked G-tetrads to bind certain planar molecules like hemin (iron (III)-protoporphyrin IX) to regulate enzymatic-like functions such as peroxidase-mimicking activity, hence the use of the term DNAzyme/RNAzyme. This ability has been widely touted as a suitable substitute to conventional enzymatic reporter systems in diagnostics. This review will provide a brief overview of the G-quadruplex architecture as well as the many forms of reporter systems ranging from absorbance to luminescence readouts in various platforms. Furthermore, some challenges and improvements that have been introduced to improve the application of G-quadruplex in diagnostics will be highlighted. As the field of diagnostics has evolved to apply different detection systems, the need for alternative reporter systems such as G-quadruplexes is also paramount.

DNA Quadruplex-Based Inhibitor With Flexible Fragments at the 3' Terminal Shows Enhanced Anti-HIV-1 Fusion Activity

Chemically optimizing the molecular structure of aptamers may enhance properties such as biological activity or metabolic stability. DNA quadruplex-based HIV-1 fusion inhibitors were found to interact with HIV-1 surface glycoprotein in aptamer mode. In this work, a series of quadruplex-based HIV-1 fusion inhibitors with flexible oligodeoxynucleotide fragments at the 3' terminal was discovered. The flexible extension did not greatly influence quadruplex formation at the 5'-end. Increasing the length of the flexible fragment may increase antifusion activity. Compared with a traditional inhibitor, d(^5'TGGGAG^3')₄, these novel inhibitors showed enhanced interaction with HIV-1 glycoproteins gp120 and gp41, which increased inhibition of 6-helical bundle formation during the course of virus fusion. These inhibitors also showed improved stability, compared with natural oligodeoxynucleotide. This work may inform the design of anti-HIV-1 DNA helix-based inhibitors with new structures or mechanisms.

Recent Progress in Fluorescence Signal Design for DNA-Based Logic Circuits

DNA-based logic circuits, encoding algorithms in DNA and processing information, are pushing the frontiers of molecular computers forward, owing to DNA's advantages of stability, accessibility, manipulability, and especially inherent biological significance and potential medical application. In recent years, numerous logic functions, from arithmetic to nonarithmetic, have been realized based on DNA. However, DNA can barely provide a detectable signal by itself, so that the DNA-based circuits depend on extrinsic signal actuators. The signal strategy of carrying out a response is becoming one of the design focuses in DNA-based logic circuit construction. Although work on sequence and structure design for DNA-based circuits has been well reviewed, the strategy on signal production lacks comprehensive summary. In this review, we focused on the latest designs of fluorescent output for DNA-based logic circuits. Several basic strategies are summarized and a few designs for developing multi-output systems are provided. Finally, some current difficulties and possible opportunities were also discussed.

Thioflavin T specifically brightening “Guanine Island” in duplex-DNA: a novel fluorescent probe for single-nucleotide mutation

Here, we found that Thioflavin T (ThT) could specifically bind with a G-GGG unit (named as “Guanine Island”) in double stranded DNA (ds-DNA).

The use of a 2-aminopurine-containing split G-quadruplex for sequence-specific DNA detection

A simple, sequence-specific DNA detection method, utilizing a fluorescent 2-aminopurine (2-AP) nucleobase analogue-containing split G-quadruplex as the key detection component, is described. In the sensor, the 2-AP-containing G-quadruplex is split into two segments and linked to a target-specific overhang sequence. The separate G-quadruplex sequences form an active G-quadruplex structure only in the presence of a complementary target DNA, which leads to a significant increase in the intensity of fluorescence from the 2-AP fluorophore. This simple, one-step, homogenous assay was successfully employed to detect target DNA with a high selectivity. In addition, the practical applicability of the detection method was demonstrated by its use in analyzing target DNAs in human serum. To the best of our knowledge, this is the first time that an investigation was carried out in which a fluorescent nucleobase analogue was incorporated into a split G-quadruplex structure and this structure was utilized as the foundation for a specific DNA sensor.

Thiazole Orange-Modified Carbon Dots for Ratiometric Fluorescence Detection of G-Quadruplex and Double-Stranded DNA

A new carbon dot (CD)-based nanoprobe for the ratiometric fluorescence detection of DNA was constructed in this work. Thiazole orange (TO), a specific organic small molecular probe toward DNA, is covalently linked to the surface of CDs, acting as the recognition element and the fluorescence response unit. In the absence of DNA, the nanoprobe only emitted the blue fluorescence of CDs, whereas TO was almost nonfluorescent. Upon addition of DNA, a turn-on emission at 530 nm appeared and gradually enhanced along with the increasing of the target DNA, whereas the fluorescence of CDs was unchanged, which realized the ratiometric detection of the target DNA. The CD-TO nanoprobe showed good selectivity to parallel G-quadruplex (G4) and double-stranded (ds) DNA over antiparallel G4 and single-stranded DNA. Moreover, the ratiometric fluorescence nanoprobe exhibited high sensitivity for ssab (a dsDNA) and c-myc (a parallel G4) with a low detection limit of 0.90 and 3.31 nM, respectively. Additionally, the G4/hemin peroxidase activity inhibition experiment demonstrated that CD-TO bound to the G4s through the end-stacking mode.