Sensitive Quantification of Escherichia coli O157:H7, Salmonella enterica, and Campylobacter jejuni by Combining Stopped Polymerase Chain Reaction with Chemiluminescence Flow-Through DNA Microarray Analysis

Detection of Escherichia coli in Food Samples Using Culture and Polymerase Chain Reaction Methods

Methods for the rapid detection of Escherichia coli and its related toxins are key to minimizing the risk of exposure to foodborne pathogens. The present study aimed to detect E. coli in food specimens using culture and polymerase chain reaction (PCR) techniques. One hundred and fifty samples from different types of food, comprising beef (n=60), chicken (n=72), and fish (n=18), were analyzed for the identification of E. coli by conventional and PCR methods. The results showed that out of 150 food samples, 44 (29.3%) were positive by culture, and 50 (33.3%) were positive by PCR. Significant differences were detected between sample types with culture (p-value < 0.005). When culture was considered the gold standard, the sensitivity of PCR was 100%, while the specificity was 94.34%. The six-hour pre-enrichment and PCR analysis are reliable in fast detection of E. coli in food samples. Hence, the identification of food pathogens using molecular-based methods would become more useful in routine diagnostic laboratories.

Stoichiometric approach to quantitative analysis of biomolecules: the case of nucleic acids

Majority of protocols for quantitative analysis of biomarkers (including nucleic acids) require calibrations and target standards. In this work, we developed a principle for quantitative analysis that eliminates the need for a standard of a target molecule. The approach is based on stoichiometric reporting. While stoichiometry is a simple and robust analytical platform, its utility toward the analysis of biomolecules is very limited due to the lack of general methodologies for detecting the equivalence point. In this work, we engineer a new target/probe-binding model that enables detecting the equivalence point while maintaining an appropriate level of specificity. We establish the probe design principles through theoretical simulations and experimental confirmation. Further, we demonstrate the utility of the stoichiometric analysis via a proof-of-concept system based on oligonucleotide hybridization. Overall, the approach that requires neither standard nor calibration yields quantitative results with an adequate accuracy (> 90-110%) and a high specificity. The principles established in our work are very general and can extend beyond oligonucleotide targets toward quantitative analysis of many other biomolecules such as antibodies and proteins.

Amplification-free detection of bacterial genes using a signaling probe-based DNA microarray

In this study, we developed a novel DNA microarray system that does not require fluorophore-labeling, amplification, or washing of the target nucleic acid fragments. Two types of DNA probes (so-called "signaling probes") labeled with a fluorescence dye (Cy3) and quencher molecule (BHQ2) were spotted on the DNA microarray such that fluorescent signals of Cy3 could be quenched by BHQ2 due to duplex formation between the probes. The addition of the target DNA or RNA fragments disrupted the duplex formed by the probes, resulting in the generation of fluorescence signals. We examined the assay conditions of the signaling probe-based DNA microarray, including the design of the probes, hybridization temperatures, and methods for fragmentation of target molecules. Since this approach does not require time-consuming processes, including labeling, amplification, and washing, the assay achieved specific detection of 16S rDNA and 16S rRNA extracted from Escherichia coli within 60 min, which was significantly rapid compared to conventional PCR-dependent DNA microarrays.

Touchable 3D hierarchically structured polyaniline nanoweb for capture and detection of pathogenic bacteria

A bacteria-capturing platform is a critical function of accurate, quantitative, and sensitive identification of bacterial pathogens for potential usage in the detection of foodborne diseases. Despite the development of various nanostructures and their surface chemical modification strategies, relative to the principal physical contact propagation of bacterial infections, mechanically robust and nanostructured platforms that are available to capture bacteria remain a significant problem. Here, a three-dimensional (3D) hierarchically structured polyaniline nanoweb film is developed for the efficient capture of bacterial pathogens by hand-touching. This unique nanostructure ensures sufficient mechanical resistance when exposed to compression and shear forces and facilitates the 3D interfacial interactions between bacterial extracellular organelles and polyaniline surfaces. The bacterial pathogens (Escherichia coli O157:H7, Salmonella enteritidis, and Staphylococcus aureus) are efficiently captured through finger-touching, as verified by the polymerase chain reaction (PCR) analysis. Moreover, the real-time PCR results of finger-touched cells on a 3D nanoweb film show a highly sensitive detection of bacteria, which is similar to those of the real-time PCR using cultured cells without the capturing step without any interfering of fluorescence signal and structural deformation during thermal cycling.

Dynamic light scattering and fluorescence dual-signal sensing of cancer antigen-125 via recognition of the polymerase chain reaction product with gold nanoparticle probe

Cancer antigen 125 (CA - 125) is an important biomarker for the diagnosis of ovarian cancer. In this paper, oligonucleotide 5'-GACAGGCCCGAAGGAATAGATAATACGACTCACTATAGGGAGACAAGAATAAACGCTCAA-3' (oligo 1) contains an aptamer of CA - 125, and was designed partly complementary to oligonucleotide 5'-CTCTCTCTCCACCTTCTTCTTTGAGCGTTTATTCTTGTCT-3' (oligo 2). Oligo 1 · oligo 2 was extended with the Klenow fragment (exo^-) polymerase for further polymerase chain reaction (PCR) processes in the presence of two primers: deoxyribose nucleoside triphosphate and Taq polymerase. Single-stranded DNA was produced at two sides of the PCR product by introducing a C₁₈ spacer into the two primers, which could hybridize with AuNPs-DNA probes, investigated by dynamic light scattering and fluorescence. The addition of CA - 125 can interrupt the hybridization between oligo 1 and oligo 2, causing the average diameter of AuNPs-DNA probes to decrease with the increase of CA-125 within the range of 5 fg mL^-1 - 50 ng mL^-1. The linear regression equation of this relationship was D = 430.48-49.60 log₁₀C, with a detection limit of 1.1 fg mL^-1. Fluorescein molecules were modified at the end of the forward primer. The fluorescence intensity of the PCR product can be measured simultaneously, with the fluorescence intensity increasing linearly with the logarithm of CA-125 concentration within a linear range from 10 fg mL^-1 to 50 ng mL^-1, with a detection limit of 1.5 fg mL^-1.

Disposable silicon-based all-in-one micro-qPCR for rapid on-site detection of pathogens

Rapid screening and low-cost diagnosis play a crucial role in choosing the correct course of intervention when dealing with highly infectious pathogens. This is especially important if the disease-causing agent has no effective treatment, such as the novel coronavirus SARS-CoV-2, and shows no or similar symptoms to other common infections. Here, we report a disposable silicon-based integrated Point-of-Need transducer (TriSilix) for real-time quantitative detection of pathogen-specific sequences of nucleic acids. TriSilix can be produced at wafer-scale in a standard laboratory (37 chips of 10 × 10 × 0.65 mm in size can be produced in 7 h, costing ~0.35 USD per device). We are able to quantitatively detect a 563 bp fragment of genomic DNA of Mycobacterium avium subspecies paratuberculosis through real-time PCR with a limit-of-detection of 20 fg, equivalent to a single bacterium, at the 35th cycle. Using TriSilix, we also detect the cDNA from SARS-CoV-2 (1 pg) with high specificity against SARS-CoV (2003).

Chemiluminescence and Bioluminescence Imaging for Biosensing and Therapy: In Vitro and In Vivo Perspectives

Chemiluminescence (CL) and bioluminescence (BL) imaging technologies, which require no external light source so as to avoid the photobleaching, background interference and autoluminescence, have become powerful tools in biochemical analysis and biomedical science with the development of advanced imaging equipment. CL imaging technology has been widely applied to high-throughput detection of a variety of analytes because of its high sensitivity, high efficiency and high signal-to-noise ratio (SNR). Using luciferase and fluorescent proteins as reporters, various BL imaging systems have been developed innovatively for real-time monitoring of diverse molecules in vivo based on the reaction between luciferin and the substrate. Meanwhile, the kinetics of protein interactions even in deep tissues has been studied by BL imaging. In this review, we summarize in vitro and in vivo applications of CL and BL imaging for biosensing and therapy. We first focus on in vitro CL imaging from the view of improving the sensitivity. Then, in vivo CL applications in cells and tissues based on different CL systems are demonstrated. Subsequently, the recent in vitro and in vivo applications of BL imaging are summarized. Finally, we provide the insight into the development trends and future perspectives of CL and BL imaging technologies.

Simultaneous and Ultrasensitive Detection of Foodborne Bacteria by Gold Nanoparticles-Amplified Microcantilever Array Biosensor

Foodborne pathogens, especially bacteria, are explicitly threatening public health worldwide. Biosensors represent advances in rapid diagnosis with high sensitivity and selectivity. However, multiplexed analysis and minimal pretreatment are still challenging. We fabricate a gold nanoparticle (Au NP)-amplified microcantilever array biosensor that is capable of determining ultralow concentrations of foodborne bacteria including Escherichia coli O157:H7, Vibrio parahaemolyticus, Salmonella, Staphylococcus aureus, Listeria monocytogenes, Shigella, etc. The method is much faster than using conventional tools without germiculturing and PCR amplification. The six pairs of ssDNA probes (ssDNA₁ + ssDNA₂ partially complementary to the target gene) that originated from the sequence analysis of the specific gene of the bacteria were developed and validated. The ssDNA₁ probes were modified with -S-(CH₂)₆ at the 5′-end and ready to immobilize on the self-assembled monolayers (SAMs) of the sensing cantilevers in the array and couple with Au NPs, while 6-mercapto-1-hexanol SAM modification was carried out on the reference cantilevers to eliminate the interferences by detecting the deflection from the environment induced by non-specific interactions. For multianalyte sensing, the target gene sequence was captured by the ssDNA₂-Au NPs in the solution, and then the Au NPs-ssDNA₂-target complex was hybridized with ssNDA₁ fixed on the beam of the cantilever sensor, which results in a secondary cascade amplification effect. Integrated with the enrichment of the Au NP platform and the microcantilever array sensor detection, multiple bacteria could be rapidly and accurately determined as low as 1–9 cells/mL, and the working ranges were three to four orders of magnitude. There was virtually no cross-reaction among the various probes with different species. As described herein, it holds great potential for rapid, multiplexed, and ultrasensitive detection in food, environment, clinical, and communal samples.

A nanozyme tag enabled chemiluminescence imaging immunoassay for multiplexed cytokine monitoring

We report a new concept of a chemiluminescence imaging nanozyme immunoassay (CINIA), in which nanozymes are exploited as catalytic tags for simultaneous multiplex detection of cytokines. The CINIA provides a novel and universal nanozyme-labeled multiplex immunoassay strategy for high-throughput detection of relevant biomarkers and further disease diagnosis.

Facile synthesis of 3D N-doped porous carbon nanosheets as highly active electrocatalysts toward the reduction of hydrogen peroxide

Constructing three-dimensional (3D) conductive frameworks with high specific surface areas and porous structures is indispensable for their applications as electrocatalysts. In this work, we illustrate for the first time that 3D N-doped porous carbon nanosheets (3D-NS), which are synthesized via a facile one-pot pyrolysis reaction using glucose and melamine as raw materials, can serve as high performance and green electrocatalysts for the reduction of H2O2. Moreover, a series of 3D-NS samples with a controllable content of nitrogen were obtained by adjusting the calcination temperature. From our research, the 3D-NS obtained at 900 °C possessed high specific surface areas, porous structures, proper dosages of N atoms, suitable degrees of graphitization and defects. Furthermore, we also illustrate their application in H2O2 electrochemical sensing in physiological environments. Under optimum conditions, the 3D-NS-based sensor displays a wide linear scope in the range of 0.5-14 000 μM and a low detection limit of 0.18 μM (S/N = 3). Therefore, with desirable selectivity, stability and anti-interference performance, the proposed sensor can be feasibly applied to detect H2O2 in human serum samples.

Circular exponential amplification of photoinduced electron transfer using hairpin probes, G-quadruplex DNAzyme and silver nanocluster-labeled DNA for ultrasensitive fluorometric determination of pathogenic bacteria

The authors describe a fluorometric strategy for the detection of pathogenic bacteria with ultrasensitivity and high specificity. This strategy relies on the combination of target-modulated photoinduced electron transfer (PET) between G-quadruplex DNAzyme and DNA (labeled with silver nanoclusters) along with hairpin probe-based circular exponential amplification. The reaction system involves three hairpin probes (H1, H2 and H3). Probe H1 contains an aptamer against S. Typhimurium and the recognition sequence for nicking endonuclease. It is used to recognize S. Typhimurium and participates in polymerase-catalyzed target recycle amplification and secondary-target recycle amplification. Probe H2 contains an aptamer against hemin and is used to form the G-quadruplex DNAzyme in the presence of hemin and potassium ion. It acts as the electron acceptor and quenches the fluorescence of the labeled DNA. Fluorescence is best measured at excitation/emission wavelengths of 567/650 nm. Probe H3 contains the template sequence for the synthesis of AgNCs and the H2-annealing sequence. Both H2 and H3 are utilized to perform a strand displacement reaction and to achieve PET between G-quadruplex DNAzyme and DNA/AgNCs. To the best of our knowledge, this is the first example of a PET between G-quadruplex DNAzyme and DNA/AgNCs coupled with circular exponential amplification. The assay has an ultra-low detection limit 8 cfu·mL^-1 of S. Typhimurium. The assay is rapid, accurate, inexpensive and simple. Hence, the strategy may represent a useful platform for ultrasensitive and highly specific detection of pathogenic bacteria as encountered in food analysis and clinical diagnosis. Graphical abstract The reaction system includes three hairpin probes (H1, H2 and H3), primer probe (P), Phi 29 DNA ploymerase (Phi 29) and nicking endonuclease Nt.AlwI (Nt.AlwI). Phi 29 and Nt.AlwI -assisted signal amplification leads to the recycling of target and produces numerous single stranded-DNAs (S). Strand displacement amplification leads to photoinduced electron transfer (PET) between G-quadruplex DNAzyme and DNA/AgNCs. HAP-based circular exponential amplification of PET results in an ultrasensitive fluorometric assay.

Foodomics and Food Safety: Where We Are

The power of foodomics as a discipline that is now broadly used for quality assurance of food products and adulteration identification, as well as for determining the safety of food, is presented. Concerning sample preparation and application, maintenance of highly sophisticated instruments for both high-performance and high-throughput techniques, and analysis and data interpretation, special attention has to be paid to the development of skilled analysts. The obtained data shall be integrated under a strong bioinformatics environment. Modern mass spectrometry is an extremely powerful analytical tool since it can provide direct qualitative and quantitative information about a molecule of interest from only a minute amount of sample. Quality of this information is influenced by the sample preparation procedure, the type of mass spectrometer used and the analyst's skills. Technical advances are bringing new instruments of increased sensitivity, resolution and speed to the market. Other methods presented here give additional information and can be used as complementary tools to mass spectrometry or for validation of obtained results. Genomics and transcriptomics, as well as affinity-based methods, still have a broad use in food analysis. Serious drawbacks of some of them, especially the affinity-based methods, are the cross-reactivity between similar molecules and the influence of complex food matrices. However, these techniques can be used for pre-screening in order to reduce the large number of samples. Great progress has been made in the application of bioinformatics in foodomics. These developments enabled processing of large amounts of generated data for both identification and quantification, and for corresponding modeling.

Simultaneous Detection of Nine Key Bacterial Respiratory Pathogens Using Luminex xTAG® Technology

Early diagnosis and treatment are crucial to the outcome of lower respiratory tract infections (LRTIs). In this study, we developed an assay combining multiplex PCR and Luminex technology (MPLT) for the detection of nine important respiratory bacterial pathogens, which frequently cause LRTIs. These were Streptococcus pneumoniae, Moraxella catarrhalis, Staphylococcus aureus, Streptococcus pyogenes, Haemophilus influenzae, Mycoplasma pneumoniae, Legionella spp., Pseudomonas aeruginosa, and Klebsiella pneumoniae. Through the hybridization reaction between two new synthesized multiplex PCR products and MagPlex-TAG Microspheres, we demonstrate that the detection limits for these nine pathogens were as low as 10²–10³ CFU/mL. Furthermore, 86 clinical bronchoalveolar lavage fluid specimens were used to evaluate this method. Compared with the results of nine simplex real-time PCR reactions targeting these nine pathogens, this MPLT assay demonstrated a high diagnostic accuracy for Streptococcus pneumoniae (sensitivity, 87.5% and specificity, 100%). Furthermore, sensitivity and specificity for the other eight pathogens all attained 100% diagnostic accuracy. In addition, the consistency between MPLT and the nine real-time PCR reactions exceeded 98.8%. In conclusion, MPLT is a high-throughput, labor-saving and reliable method with high sensitivity and specificity for identifying nine respiratory pathogens responsible for LRTIs. Indeed, this assay may be a promising supplement to conventional methods used to diagnose LRTIs.

Selective capture and rapid identification of E. coli O157:H7 by carbon nanotube multilayer biosensors and microfluidic chip-based LAMP

A combination of CNT multilayer biosensors and microfluidic chip-based LAMP was developed for the capture and visual detection of E. coli O157:H7.

A Dual Filtration-Based Multiplex PCR Method for Simultaneous Detection of Viable Escherichia coli O157:H7, Listeria monocytogenes, and Staphylococcus aureus on Fresh-Cut Cantaloupe

Fresh-cut cantaloupe is particularly susceptible to contamination with pathogenic bacteria, such as Escherichia coli O157:H7, Listeria monocytogenes, and Staphylococcus aureus. Therefore, development of rapid, yet accurate detection techniques is necessary to ensure food safety. In this study, a multiplex PCR system and propidium monoazide (PMA) concentration were optimized to detect all viable pathogens in a single tube. A dual filtration system utilized a filtration membrane with different pore sizes to enrich pathogens found on fresh-cut cantaloupe. The results revealed that an optimized multiplex PCR system has the ability to effectively detect three pathogens in the same tube. The viable pathogens were simultaneously detected for PMA concentrations above 10 μg/ml. The combination of a nylon membrane (15 μm) and a micro pore filtration membrane (0.22 μm) formed the dual filtration system used to enrich pathogens. The achieved sensitivity of PMA-mPCR based on this dual filtration system was 2.6 × 103 cfu/g for L. monocytogenes, 4.3 × 10 cfu/g for E. coli O157:H7, and 3.1 × 102 cfu/g for S. aureus. Fresh-cut cantaloupe was inoculated with the three target pathogens using concentrations of 103, 102, 10, and 1 cfu/g. After 6-h of enrichment culture, assay sensitivity increased to 1 cfu/g for each of these pathogens. Thus, this technique represents an efficient and rapid detection tool for implementation on fresh-cut cantaloupe.

Rapid screening of waterborne pathogens using phage-mediated separation coupled with real-time PCR detection

Escherichia coli O157:H7 is a ubiquitous pathogen which can be linked to foodborne outbreaks worldwide. In addition to the significant illnesses, hospitalizations, and deaths resulting from the outbreaks, there can be severe economic consequences to farmers, food manufacturers, and municipalities. A rapid detection assay which can validate sanitation and water quality would prove beneficial to these situations. Here, we report a novel bacteriophage-mediated detection of E. coli O157:H7 which utilizes the specific recognition between phages and their host cell as well as the natural lysis component of the infection cycle for DNA release. Carboxylic acid-functionalized magnetic beads were conjugated with bacteriophage and used to separate and concentrate E. coli O157:H7. The effects of bead incubation time, salinity, pH, and temperature on the bio-magnetic separation were investigated and compared to an antibody-based counterpart. The conditions of 0.01 M PBS, pH 7.0, and 20 min of reaction at 37 °C were found to be optimal. The capture efficiency of the coupled assay was approximately 20 % higher than that of antibody-based separation under extreme conditions. The resulting bead-phage-bacteria complexes were quantitatively detected by real-time PCR (qPCR). Our results demonstrated that the use of phage-based magnetic separation coupled with qPCR improved the sensitivity of detection by 2 orders of magnitude compared that without phage-based pre-concentration. Specificity and selectivity of the assay system was evaluated, and no cross-reactivity occurred when Salmonella typhimurium, Staphylococcus aureus, and Pseudomonas aeruginosa were tested. The total assay time was less than 2 h.

Recombinant plasmid-based quantitative Real-Time PCR analysis of Salmonella enterica serotypes and its application to milk samples

The aim of the current study was to develop, a new, rapid, sensitive and quantitative Salmonella detection method using a Real-Time PCR technique based on an inexpensive, easy to produce, convenient and standardized recombinant plasmid positive control. To achieve this, two recombinant plasmids were constructed as reference molecules by cloning the two most commonly used Salmonella-specific target gene regions, invA and ttrRSBC. The more rapid detection enabled by the developed method (21 h) compared to the traditional culture method (90 h) allows the quantitative evaluation of Salmonella (quantification limits of 10(1)CFU/ml and 10(0)CFU/ml for the invA target and the ttrRSBC target, respectively), as illustrated using milk samples. Three advantages illustrated by the current study demonstrate the potential of the newly developed method to be used in routine analyses in the medical, veterinary, food and water/environmental sectors: I--The method provides fast analyses including the simultaneous detection and determination of correct pathogen counts; II--The method is applicable to challenging samples, such as milk; III--The method's positive controls (recombinant plasmids) are reproducible in large quantities without the need to construct new calibration curves.

Label-free, homogeneous, and ultrasensitive detection of pathogenic bacteria based on target-triggered isothermally exponential amplification

A novel colorimetric biosensing strategy for highly selective and ultrasensitive detection of pathogenic bacteria based on target-triggered EXPAR by the property of polymerase and nicking activity of restriction endonuclease has been reported.

On-Chip Isothermal Nucleic Acid Amplification on Flow-Based Chemiluminescence Microarray Analysis Platform for the Detection of Viruses and Bacteria

This work presents an on-chip isothermal nucleic acid amplification test (iNAAT) for the multiplex amplification and detection of viral and bacterial DNA by a flow-based chemiluminescence microarray. In a principle study, on-chip recombinase polymerase amplification (RPA) on defined spots of a DNA microarray was used to spatially separate the amplification reaction of DNA from two viruses (Human adenovirus 41, Phi X 174) and the bacterium Enterococcus faecalis, which are relevant for water hygiene. By establishing the developed assay on the microarray analysis platform MCR 3, the automation of isothermal multiplex-amplification (39 °C, 40 min) and subsequent detection by chemiluminescence imaging was realized. Within 48 min, the microbes could be identified by the spot position on the microarray while the generated chemiluminescence signal correlated with the amount of applied microbe DNA. The limit of detection (LOD) determined for HAdV 41, Phi X 174, and E. faecalis was 35 GU/μL, 1 GU/μL, and 5 × 10(3) GU/μL (genomic units), which is comparable to the sensitivity reported for qPCR analysis, respectively. Moreover the simultaneous amplification and detection of DNA from all three microbes was possible. The presented assay shows that complex enzymatic reactions like an isothermal amplification can be performed in an easy-to-use experimental setup. Furthermore, iNAATs can be potent candidates for multipathogen detection in clinical, food, or environmental samples in routine or field monitoring approaches.

Fluorescence-based bioassays for the detection and evaluation of food materials

We summarize here the recent progress in fluorescence-based bioassays for the detection and evaluation of food materials by focusing on fluorescent dyes used in bioassays and applications of these assays for food safety, quality and efficacy. Fluorescent dyes have been used in various bioassays, such as biosensing, cell assay, energy transfer-based assay, probing, protein/immunological assay and microarray/biochip assay. Among the arrays used in microarray/biochip assay, fluorescence-based microarrays/biochips, such as antibody/protein microarrays, bead/suspension arrays, capillary/sensor arrays, DNA microarrays/polymerase chain reaction (PCR)-based arrays, glycan/lectin arrays, immunoassay/enzyme-linked immunosorbent assay (ELISA)-based arrays, microfluidic chips and tissue arrays, have been developed and used for the assessment of allergy/poisoning/toxicity, contamination and efficacy/mechanism, and quality control/safety. DNA microarray assays have been used widely for food safety and quality as well as searches for active components. DNA microarray-based gene expression profiling may be useful for such purposes due to its advantages in the evaluation of pathway-based intracellular signaling in response to food materials.

Microarray on digital versatile disc for identification and genotyping of Salmonella and Campylobacter in meat products

Highly portable, cost-effective, and rapid-response devices are required for the subtyping of the most frequent food-borne bacteria; thereby the sample rejection strategies and hygienization techniques along the food chain can be tailor-designed. Here, a novel biosensor is presented for the generic detection of Salmonella and Campylobacter and the discrimination between their most prevalent serovars (Salmonella Enteritidis, Salmonella Typhimurium) and species (Campylobacter jejuni, Campylobacter coli), respectively. The method is based on DNA microarray developed on a standard digital versatile disc (DVD) as support for a hybridization assay and a DVD driver as scanner. This approach was found to be highly sensitive (detection limit down to 0.2 pg of genomic DNA), reproducible (relative standard deviation 4-19 %), and high working capacity (20 samples per disc). The inclusivity and exclusivity assays indicated that designed oligonucleotides (primers and probes) were able to discriminate targeted pathogens from other Salmonella serovars, Campylobacter species, or common food-borne pathogens potentially present in the indigenous microflora. One hundred isolates from meat samples, collected in a poultry factory, were analyzed by the DVD microarraying and fluorescent real-time PCR. An excellent correlation was observed for both generic and specific detection (relative sensitivity 93-99 % and relative specificity 93-100 %). Therefore, the developed assay has been shown to be a reliable tool to be used in routine food safety analysis, especially in settings with limited infrastructure due to the excellent efficiency-cost ratio of compact disc technology. Graphical Abstract DNA microarray performed by DVD technology for pathogen genotyping.

Thiourea dioxide as a unique eco-friendly coreactant for luminol chemiluminescence in the sensitive detection of luminol, thiourea dioxide and cobalt ions

Thiourea dioxide, a unique reductant that can generate oxygen upon decomposition, has been investigated as an efficient, cost-effective, and stable coreactant.

A sensitive lateral flow biosensor for Escherichia coli O157:H7 detection based on aptamer mediated strand displacement amplification

Foodborne diseases caused by pathogens are one of the major problems in food safety. Convenient and sensitive point-of-care rapid diagnostic tests for food-borne pathogens have been a long-felt need of clinicians. Commonly used methods for pathogen detection rely on conventional culture-based tests, antibody-based assays and polymerase chain reaction (PCR)-based techniques. These methods are costly, laborious and time-consuming. Herein, we present a simple and sensitive aptamer based biosensor for rapid detection of Escherichia coli O157:H7 (E. coli O157:H7). In this assay, two different aptamers specific for the outmembrane of E. coli O157:H7 were used. One of the aptamers was used for magnetic bead enrichment, and the other was used as a signal reporter for this pathogen, which was amplified by isothermal strand displacement amplification (SDA) and further detected by a lateral flow biosensor. Only the captured aptamers on cell membrane were amplified, limitations of conventional DNA amplification based method such as false-positive can be largely reduced. The generated signals (red bands on the test zone of a lateral flow strip) can be unambiguously read out by the naked eye. As low as 10 colony forming units (CFU) of E. coli O157:H7 were detected in this study. Without DNA extraction, the reduced handling and simpler equipment requirement render this assay a simple and rapid alternative to conventional methods.

Useful oriented immobilization of antibodies on chimeric magnetic particles: direct correlation of biomacromolecule orientation with biological activity by AFM studies

The preparation and performance of a suitable chimeric biosensor based on antibodies (Abs) immobilized on lipase-coated magnetic particles by means of a standing orienting strategy are presented. This novel system is based on hydrophobic magnetic particles coated with modified lipase molecules able to orient and further immobilize different Abs in a covalent way without any previous site-selective chemical modification of biomacromolecules. Different key parameters attending the process were studied and optimized. The optimal preparation was performed using a controlled loading (1 nmol Ab g(-1) chimeric support) at pH 9 and a short reaction time to recover a biological activity of about 80%. AFM microscopy was used to study and confirm the Abs-oriented immobilization on lipase-coated magnetic particles and the final achievement of a highly active and recyclable chimeric immune sensor. This direct technique was demonstrated to be a powerful alternative to the indirect immunoactivity assay methods for the study of biomacromolecule-oriented immobilizations.

Chemiluminescence imaging for a protein assay via proximity-dependent DNAzyme formation

An array-based chemiluminescence (CL) imaging method is presented for simple and high throughput detection of protein targets via the formation of a proximity-dependent DNAzyme to produce sensitive CL signal. The protein array is prepared by covalently immobilizing single-stranded guanine-rich nucleic acid 1-labeled antibody 1 (GDNA1-Ab1) or GDNA-thrombin aptamer subunit 1 (Apt-P1) as the capture probe on each sensing site on an aldehyde-functionalized disposable glass chip. In the presence of target protein, hemin, and another GDNA2-Ab2 or Apt-P2 probe, a sandwich complex among the protein and two probes can be formed to trigger the proximity assembly of GDNA1, hemin, and GDNA2, which leads to the formation of hemin-G-quadruplex DNAzyme. At different sensing sites, the DNAzyme-induced CL signals are simultaneously collected by a charge-coupled device for imaging readout of the sensing events. As a proof of concept, the proposed array-based CL imaging strategy is applied to detect carcinoembryonic antigen and thrombin and shows wide linear ranges over 4 and 5 orders of magnitude with the detection limits of 0.15 ng mL(-1) and 0.49 pM, respectively. Benefiting from the one-step proximity-dependent DNAzyme formation, the assay method is extremely simple and can be carried out within 40 min. By using different probes, the array can be easily used to detect more protein analytes. The advantages of easy operation, short assay time, good sensitivity, and versatility make it a promising candidate for point-of-care testing and commercial application.

Molecular methods for microbiological quality control of meat and meat products: a review

Achieving food safety is a global health goal and the food-borne diseases take a major check on global health. Therefore, detection of microbial pathogens in food is the solution to the prevention and recognition of problems related to health and safety. Conventional and standard bacterial detection methods such as culture and colony counting methods and immunology-based methods may take up to several hours or even a few days to yield a result. Obviously, this is inadequate, and recently many researchers are focusing towards the progress of rapid diagnostic methods. The advent of molecular techniques has led to the development of a diverse array of assay for quality control of meat and meat products. Rapid analysis using DNA hybridization and amplification techniques offer more sensitivity and specificity to get results than culture based methods as well as dramatic reduction in the time to get results. Many methods have also achieved the high level automation, facilitating their application as routine sample screening assays. This review is intended to provide an overview of the molecular methods for microbiological quality control of meat and meat products.

A novel enzyme-linked immunosorbent assay for detection of Escherichia coli O157:H7 using immunomagnetic and beacon gold nanoparticles

This paper presents a functional nanoparticle-enhanced enzyme-linked immunosorbent assay (FNP-ELISA) for detection of enterohemorrhagic Escherichia coli (EHEC) O157:H7. Immunomagnetic nanoparticles (IMMPs) conjugated with monoclonal anti-O157:H7 antibody were used to capture E. coli O157:H7. Beacon gold nanoparticles (B-GNPs) coated with polyclonal anti-O157:H7 and biotin single-stranded DNA (B-DNA) were then subjective to immunoreaction with E. coli O157:H7, which was followed by streptavidin-horseradish peroxidase (Strep-HRP) conjugated with B-GNPs based on a biotin-avidin system. The solutions containing E. coli O157:H7, IMMPs, B-GNPs, and Strep-HRP were collected for detecting color change. The signal was significantly amplified with detection limits of 68 CFU mL^-1 in PBS and 6.8 × 10² to 6.8 × 10³ CFU mL^-1 in the food samples. The FNP-ELISA method developed in this study was two orders of magnitude more sensitive than immunomagnetic separation ELISA (IMS-ELISA) and four orders of magnitude more sensitive than C-ELISA. The entire detection process of E. coli O157:H7 lasted only 3 h, and thus FNP-ELISA is considered as a time-saving method.

Oligonucleotide microarray chip for the quantification of MS2, ΦX174, and adenoviruses on the multiplex analysis platform MCR 3

Pathogenic viruses are emerging contaminants in water which should be analyzed for water safety to preserve public health. A strategy was developed to quantify RNA and DNA viruses in parallel on chemiluminescence flow-through oligonucleotide microarrays. In order to show the proof of principle, bacteriophage MS2, ΦX174, and the human pathogenic adenovirus type 2 (hAdV2) were analyzed in spiked tap water samples on the analysis platform MCR 3. The chemiluminescence microarray imaging unit was equipped with a Peltier heater for a controlled heating of the flow cell. The efficiency and selectivity of DNA hybridization could be increased resulting in higher signal intensities and lower cross-reactivities of polymerase chain reaction (PCR) products from other viruses. The total analysis time for DNA/RNA extraction, cDNA synthesis for RNA viruses, polymerase chain reaction, single-strand separation, and oligonucleotide microarray analysis was performed in 4-4.5 h. The parallel quantification was possible in a concentration range of 9.6 × 10(5)-1.4 × 10(10) genomic units (GU)/mL for bacteriophage MS2, 1.4 × 10(5)-3.7 × 10(8) GU/mL for bacteriophage ΦX174, and 6.5 × 10(3)-1.2 × 10(5) for hAdV2, respectively, by using a measuring temperature of 40 °C. Detection limits could be calculated to 6.6 × 10(5) GU/mL for MS2, 5.3 × 10(3) GU/mL for ΦX174, and 1.5 × 10(2) GU/mL for hAdV2, respectively. Real samples of surface water and treated wastewater were tested. Generally, found concentrations of hAdV2, bacteriophage MS2, and ΦX174 were at the detection limit. Nevertheless, bacteriophages could be identified with similar results by means of quantitative PCR and oligonucleotide microarray analysis on the MCR 3.

Lateral flow biosensor for DNA extraction-free detection of Salmonella based on aptamer mediated strand displacement amplification

Convenient and sensitive point-of-care rapid diagnostic tests for food-borne pathogens have been a long-felt need of clinicians. Traditional approaches such as culture-based methods have good sensitivity and specificity, but they tend to be tedious and time-consuming. Herein we present a simple and sensitive aptamer based biosensor for rapid detection of Salmonella enteritidis (S. enteritidis). One of the aptamers specific for the outmembrane of S. enteritidis was used for magnetic bead enrichments. Another aptamer against S. enteritidis was used as a reporter for this pathogen, which was amplified by isothermal strand displacement amplification (SDA) and further detected by a lateral flow biosensor. As low as 10(1) colony forming unit (CFU) of S. enteritidis was detected in this study. Without DNA extraction, the reduced handling and simpler equipment requirement render this assay a simple and rapid alternative to conventional methods.