Nanotube-Based Colorimetric Probe for Ultrasensitive Detection of Ataxia Telangiectasia Mutated Protein

Enhanced Competitive Immunomagnetic Beads Assay Assisted with PAMAM-Gold Nanoparticles Multi-Enzyme Probes for Detection of Deoxynivalenol

Contamination of deoxynivalenol (DON) in grains has attracted widespread concern. It is urgently needed to develop a highly sensitive and robust assay for DON high-throughput screening. Antibody against DON was assembled on the surface of immunomagnetic beads orientationally by the aid of Protein G. AuNPs were obtained under the scaffolding of poly(amidoamine) dendrimer (PAMAM). DON-horseradish peroxidase (HRP) was combined on the periphery of AuNPs/PAMAM by a covalent link to develop DON-HRP/AuNPs/PAMAM. Magnetic immunoassay based on DON-HRP/AuNPs/PAMAM was optimized and that based on DON-HRP/AuNPs and DON-HRP was adopted as comparison. The limits of detection (LODs) were 0.447 ng/mL, 0.127 ng/mL and 0.035 ng/mL for magnetic immunoassays based on DON-HRP, DON-HRP/Au and DON-HRP/Au/PAMAM, respectively. Magnetic immunoassay based on DON-HRP/AuNPs/PAMAM displayed higher specificity towards DON and was utilized to analyze grain samples. The recovery for the spiked DON in grain samples was 90.8-116.2% and the method presented a good correlation with UPLC/MS. It was found that the concentration of DON was in the range of ND-3.76 ng/mL. This method allows the integration of dendrimer-inorganic NPs with signal amplification properties for applications in food safety analysis.

Enzyme-controllable just-in-time production system of copper hexacyanoferrate nanoparticles with oxidase-mimicking activity for highly sensitive colorimetric immunoassay

Nanozymes are a series of elaborately designed nanomaterials that can mimic the catalytic sites of natural enzymes for reactions. Bypassing the tedious design and preparation of nanomaterial, in this work, we report on a novel just-in-time production system of copper hexacyanoferrate nanoparticles (CHNPs), which act as an oxidase-mimicking nanozyme. This system can rapidly produce CHNPs nanozyme on demand by simply mixing Cu(II) with potassium hexacyanoferrate(III) (K₃[Fe(CN)₆]). It is found that once K₃[Fe(CN)₆] is reduced to K₄[Fe(CN)₆], the formation of CHNPs is inhibited. Therefore, the just-in-time production system of CHNPs was coupled with alkaline phosphatase (ALP) to construct an enzyme-controllable just-in-time production (ECJP) system, in which ALP could inhibit the production of by catalyzing the hydrolysis of ascorbic acid 2-phosphate (AAP) to generating ascorbic acid (AA). The ECJP system is then used to probe the activity of ALP by employing 2,2'-azinobis-(3-ethylbenzthiazoline-6-sulphonate) (ABTS) as the chromogenic substrate, and a detection limit of 0.003 U L^-1 was achieved. Moreover, by adapting ALP as the enzyme label, an ECJP system-based colorimetric immunoassay protocol was established for sensitive detection of aflatoxin B₁ (AFB₁), and a detection limit as low as 0.73 pg mL^-1 was achieved. The developed immunoassay method is successfully applied to the detection of AFB₁ in peanut samples. The operation of ECJP system is quite simple and the coupling of ALP with CHNPs nanozyme can arouse dual enzyme-like cascade signal amplification. So, we believe this work can offer a new perspective for the development of nanozymes-based biodetection methods and colorimetric immunoassay strategies.

Construction of a Molybdenum Disulfide-Based Colorimetric Sensor for Label-Free Infectious Disease Analysis Coupled with a Catalyzed Hairpin Assembly Reaction

The simple and accurate determination of pathogenic infectious diseases is very beneficial to public health prevention and control. For this purpose, we designed a colorimetric sensor for label-free avian influenza A (H7N9) virus gene sequence detection based on gold@platinum core-shell bimetallic-nanoparticle-decorated molybdenum disulfide (MoS₂-Au@Pt) nanocomposites. MoS₂-Au@Pt nanocomposites were used as nanoenzymes to catalyze 3,3',5,5'-tetramethylbenzidine (TMB) by hydrogen peroxide (H₂O₂) because of their intrinsic peroxidase-mimicking activity. Coupled with different affinities of MoS₂-Au@Pt nanocomposites toward single-stranded (ss) and double-stranded (ds) DNA and the target-triggered catalyzed hairpin assembly (CHA) reaction, the proposed sensor can qualitatively and quantitatively determine H7N9 by the naked eye. Experimental results showed that this sensor can detect H7N9 in buffer and real samples because of its high sensitivity, selectivity, and repeatability.

Chemiluminescence microarray immunoassay for multiple aminoglycoside antibiotics based on carbon nanotube-assisted signal amplification

The simultaneous determination of multiple analytes has been an urgent demand in screening of antibiotic residues in food products of animal origin due to its higher analysis efficiency. Five aminoglycoside antibiotics (AGAs) have been monitored in milk, including gentamicin (GEN), kanamycin (KAN), neomycin (NEO), and streptomycin/dihydrostreptomycin (STR/diSTR). A chemiluminescence microarray immunoassay (CLMIA) based on nitrocellulose membrane had been developed for the detection of multiple AGAs, which the LODs for STR, KAN, NEO, and GEN were 4.74 ng/mL, 4.97 ng/mL, 2.99 ng/mL, and 4.42 ng/mL respectively. To improve the sensitivity of immunoassay, single-well carbon tubes (SWCNTs) were utilized as solid support for loading horseradish peroxidase-labelled goat anti-mouse antibody to obtain the multi-enzyme particles. After the optimization of usage of multi-enzyme particles and antibodies, the enhanced CLMIA was established and evaluated. The LODs were 1.25 ng/mL for STR, 0.64 ng/mL for KAN, 0.38 ng/mL for GEN, and 0.39 ng/mL for NEO, which was improved by threefold, sevenfold, 11-fold, and sevenfold compared with the conventional CLMIA developed. These methods presented higher specificity and repeatability. Finally, the enhanced CLMIA based on CNT-assisted multi-enzyme particles was utilized to analyze twenty-five milk samples from local market and dairy farm, which all the results were below the LOD. The enhanced CLMIA showed the great application potential for the detection of multiple targets simultaneously and provided efficient tool for the screening of pollutants in food.

An enhanced enzyme-linked aptamer assay for the detection of zearalenone based on gold nanoparticles

A novel enhanced enzyme-linked aptamer assay (ELAA) for the detection of zearalenone (ZEN) was developed based on gold nanoparticles (AuNPs) modified with an aptamer and horseradish peroxidase (HRP). In this assay, the aptamer was used as a recognition probe to competitively bind with coated ZEN-BSA on a microplate and ZEN in samples. AuNPs with high surface areas were used as a carrier to immobilize more amounts of HRP labelled aptamer probe, which can amplify the colorimetric signal by enhancing catalysis of the HRP enzyme compared with the traditional enzyme-linked method. Under the optimal conditions, the enhanced ELAA presented a good linearity in the range of 0.1-160 ng mL-1 and the limit of detection was 0.08 ng mL-1 for ZEN detection. In addition, the enhanced ELAA had no cross reactivity with other mycotoxins and showed good recoveries in spiked corn oil samples. These results indicated that the AuNP enhanced ELAA provided a new approach with simplicity, and high sensitivity and specificity for the detection of ZEN in foodstuff.

Recent advances in nanomaterials for colorimetric cancer detection

The early diagnosis of cancer can significantly improve patient survival rates. Colorimetric methods for real-time naked-eye detection have aroused growing interest owing to their low cost, simplicity, and practicability. With the rapid development of nanotechnology, compared with conventional diagnostic methods, nanomaterials with unique physical and chemical properties were applied to improve selectivity and sensitivity in colorimetric detection of cancer biomarkers, such as MUC1 aptamer conjugated PtAuNPs to specifically recognize MUC1 proteins on the cancer cell surfaces, etching of silver nanoprisms to detect prostate-specific antigen, and aggregation or dispersion of AuNPs to sense prostate cancer antigen gene 3 or glutathione, by which the limit of detection (LOD) could approach values down to a few cancer cells per mL, several fg per mL proteins, several ng of nucleic acids, or even tens of nM of organic molecules. Herein, we review the recent progress achieved in developing colorimetric nanosensors for cancer diagnosis, particularly providing an overview of the sensing principles, target biomarkers, advanced nanomaterials employed in the fabrication of sensing platforms, and strategies for improving signal sensitivity and specificity. Finally, we sum up the nanomaterial-based colorimetric cancer detection as well as existing challenges that should be resolved to extend their clinical application.

Novel enzyme-based electrochemical and colorimetric biosensors for tetracycline monitoring in milk

Recently, there has been a growing demand to develop portable devices for the fast detection of contaminants in food safety, healthcare, and environmental fields. Herein, two biosensing methods were designed by the use of nicotinamide adenine dinucleotide phosphate (NAD(P)H)-dependent TetX2 enzyme activity and thionine as an excellent electrochemical and colorimetric mediator/probe to monitor tetracycline (TC) in milk. The nanoporous glassy carbon electrode (NPGCE) modified with polythionine was first prepared by electrochemically and then TetX2 was immobilized onto the NPGCE using polyethyleneimine. The prepared biosensor provided a high electrocatalytic response toward NAD(P)H by significantly reducing its overpotential. The proposed biosensor exhibited a detection limit of 40 nM with a linear range of 0.1-0.8 μM for TC determination. Besides, the thionine probe was used to develop a novel colorimetric assay using a simple enzymatic color reaction within a few minutes. The limit of detection for TC was experimentally achieved as 60 nM, which was lower than the safety levels established by the World Health Organization (225 nM). The correlation between change in the color of the solution and the concentration of TC was used for quality control of milk samples, as confirmed by the standard high-performance liquid chromatography method. The results show the great potential of the proposed assays as portable instruments for on-site TC measurements.

Chronopotentiometric aptasensing with signal amplification based on enzyme-catalyzed surface polymerization

A signal amplification strategy based on the horseradish peroxidase catalyzed polymerization of dopamine on a polymeric ion-selective membrane surface is proposed for the sensitive chronopotentiometric detection of an aptamer-target binding event.

One-Step Instantaneous Detection of Multiple Military and Improvised Explosives Facilitated by Colorimetric Reagent Design

Although colorimetric detection based on reagents has been widely used in the fields of practical trace analysis, its versatility for detecting multitargets remains the most challenging problem. As a proof of concept, a general colorimetric reagent based on potassium isopropanol (C₃H₇KO) and dimethyl sulfoxide for one-step instantaneous detection and discrimination of typical military and improvised explosives was designed. Vivid colors from none to purple red, blue green, yellow green, and green were shown, respectively, when detecting 2,4,6-trinitrotoluene (TNT), 2,4-dinitrotoluene (DNT), elemental sulfur (S), and potassium permanganate (KMnO₄). The unique design including the specific nucleophilic addition reaction and the base-catalyzed oxidation-induced electron transfer ensures perfect selectivity even upon facing more than 20 interferents. It is further experimentally demonstrated that the confinement effect introduced by Tween-20 plays an essential role in enhancing the color signal on the surface and thus boosts the detection performance even with a mass as low as 1.45 ng. The applicability of this versatile colorimetric reagent was further verified by integrating the reagent onto paper strips for the in-field identification of TNT, DNT, S, and KMnO₄ with the help of a portable smartphone-based microscope apparatus, and a practical detection mass of 10.3 ng could be realized. We expect the present colorimetric reagent design strategy would pave a way for one-step instantaneous visual detection toward trace multianalytes.

Non-Enzymatic Electrochemical Sensor Based on Sliver Nanoparticle-Decorated Carbon Nanotubes

The authors report a non-enzymatic electrochemical sensor based on a sliver nanoparticle-decorated carbon nanotube (AgNPs-MWCNT). Highly-dispersed AgNPs were loaded on the MWCNT surface though a simple and facile two-step method. The morphology, components, and the size of the AgNPs-MWCNT nanocomposite were characterized by transmission electron microscopy, X-ray diffraction, and ICP analysis. Benefitting from the synergistic effect between the AgNPs and MWCNT, the AgNPs-MWCNT nanocomposite exhibited high electrocatalytic activity for H₂O₂; the AgNPs-MWCNT electrochemical sensor was prepared by coating the AgNPs-MWCNT nanocomposite on a glassy carbon electrode, and it showed a fast and sensitive response to H₂O₂ with a linear range of 1 to 1000 μM. The detection limit was 0.38 μM (S/N = 3). The sensor was applied to detect H₂O₂ in spiked human blood serum samples with satisfactory results.

Gold-platinum nanoflowers as a label and as an enzyme mimic for use in highly sensitive lateral flow immunoassays: application to detection of rabbit IgG

The authors describe the preparation of gold-platinum nanoflower (AuPt NFs) and show that they can be simultaneously used as a label and as an enzyme mimic in lateral flow immunoassays (LFIs). The AuPt NFs were prepared by growing Pt nanowires on the surface of gold nanoparticle. The assay involves the capture of target proteins (here: rabbit IgG as a model analyte) by the immobilized capture antibody, and by using AuPt NF-labeled secondary antibody. The AuPt NFs are thus captured by the test zone and produce a characteristic black band for visual detection of the antigen (IgG). The coloration of the test line can be further enhanced by addition of the chromogenic substrate 3-amino-9-ethyl-carbazole which is catalytically oxidized by the captured Pt nanowires on the AuPt NF and produce a red coloration. Quantitative results were obtained by reading the test line intensities with a portable strip reader. The LFI has a 5 pg mL-1 detection limit for IgG under optimized experimental conditions. This is 100 times lower than that of the conventional AuNP-based LFI. Conceivably, this assay has a wide scope in that it may be applied to numerous other targets for which appropriate antibodies are available. Graphical abstract Gold-platinum nanoflowers are used as a label and as an enzyme mimic in a highly sensitive lateral flow immunoassay for IgG. The detection limit of gold-platinum nanoflower-based lateral flow assay is 100 times lower than that of the conventional gold nanopaticle-based lateral flow assay.

Nanomaterials-Based Colorimetric Immunoassays

Colorimetric immunoassays for tumor marker detection have attracted considerable attention due to their simplicity and high efficiency. With the achievements of nanotechnology and nanoscience, nanomaterials-based colorimetric immunoassays have been demonstrated to be promising alternatives to conventional colorimetric enzyme-linked immunoassays. This review is focused on the progress in colorimetric immunoassays with the signal amplification of nanomaterials, including nanomaterials-based artificial enzymes to catalyze the chromogenic reactions, analyte-induced aggregation or size/morphology change of nanomaterials, nanomaterials as the carriers for loading enzyme labels, and chromogenic reactions induced by the constituent elements released from nanomaterials.

Sensitive detection of dengue virus NS1 by highly stable affibody-functionalized gold nanoparticles

The anti-NS1 affibody-functionalized gold nanoparticles based ELISA resulted in a 14.2-fold signal amplification performance for dengue NS1 detection.

An Enzyme-Free Signal Amplification Technique for Ultrasensitive Colorimetric Assay of Disease Biomarkers

Enzyme-based colorimetric assays have been widely used in research laboratories and clinical diagnosis for decades. Nevertheless, as constrained by the performance of enzymes, their detection sensitivity has not been substantially improved in recent years, which inhibits many critical applications such as early detection of cancers. In this work, we demonstrate an enzyme-free signal amplification technique, based on gold vesicles encapsulated with Pd-Ir nanoparticles as peroxidase mimics, for colorimetric assay of disease biomarkers with significantly enhanced sensitivity. This technique overcomes the intrinsic limitations of enzymes, thanks to the superior catalytic efficiency of peroxidase mimics and the efficient loading and release of these mimics. Using human prostate surface antigen as a model biomarker, we demonstrated that the enzyme-free assay could reach a limit of detection at the femtogram/mL level, which is over 10³-fold lower than that of conventional enzyme-based assay when the same antibodies and similar procedure were used.

Comparison of four functionalization methods of gold nanoparticles for enhancing the enzyme-linked immunosorbent assay (ELISA)

The enzyme-linked immunosorbent assay (ELISA) technique is based on the specific recognition ability of the molecular structure of an antigen (epitope) by an antibody and is likely the most important diagnostic technique used today in bioscience. With this methodology, it is possible to diagnose illness, allergies, alimentary fraud, and even to detect small molecules such as toxins, pesticides, heavy metals, etc. For this reason, any procedures that improve the detection limit, sensitivity or reduce the analysis time could have an important impact in several fields. In this respect, many methods have been developed for improving the technique, ranging from fluorescence substrates to methods for increasing the number of enzyme molecules involved in the detection such as the biotin-streptavidin method. In this context, nanotechnology has offered a significant number of proposed solutions, mainly based on the functionalization of nanoparticles from gold to carbon which could be used as antibody carriers as well as reporter enzymes like peroxidase. However, few works have focused on the study of best practices for nanoparticle functionalization for ELISA enhancement. In this work, we use 20 nm gold nanoparticles (AuNPs) as a vehicle for secondary antibodies and peroxidase (HRP). The design of experiments technique (DOE) and four different methods for biomolecule loading were compared using a rabbit IgG/goat anti-rabbit IgG ELISA model (adsorption, directional, covalent and a combination thereof). As a result, AuNP probes prepared by direct adsorption were the most effective method. AuNPs probes were then used to detect gliadin, one of the main components of wheat gluten, the protein composite that causes celiac disease. With this optimized approach, our data showed a sensitivity increase of at least five times and a lower detection limit with respect to a standard ELISA of at least three times. Additionally, the assay time was remarkably decreased.

A non-enzyme cascade amplification strategy for colorimetric assay of disease biomarkers

A non-enzyme cascade amplification strategy for colorimetric assay of disease biomarkers with substantially enhanced detection sensitivity has been developed.

Bionanotechnology-Based Colorimetric Sensors for Food Analysis

Colorimetric biosensing is widely used in clinical diagnosis and environmental evaluation due to its simplicity and practicality. It has also recently become popular in food analysis. Nanotechnology is being integrated into the development of colorimetric biosensors to overcome the bottleneck of conventional colorimetric biosensing approaches. Innovative bionanotechnology-based colorimetric sensors have recently been developed. This chapter focuses on the progress of bionanotechnology-based colorimetric biosensors in food safety assessment. We also describe how nanomaterials can be integrated and tailored to meet the requirements of colorimetric biosensing systems for the detection of heavy metal cations, antibiotics, nucleic acids, and toxins/toxicants. Approaches described include functionalization of nanomaterials to act as colorimetric probes, carriers and enzyme mimetics. Selected examples of the most recent preliminary applications of bionanotechnology-based colorimetric biosensors in food safety assessment are given to illustrate the novel concepts and promising future applications. Future prospects for the application of bionanotechnology-based colorimetric biosensors in food safety assessment are also briefly discussed.

Carbon nanotube-based lateral flow biosensor for sensitive and rapid detection of DNA sequence

In this article, we describe a carbon nanotube (CNT)-based lateral flow biosensor (LFB) for rapid and sensitive detection of DNA sequence. Amine-modified DNA detection probe was covalently immobilized on the shortened multi-walled carbon nanotubes (MWCNTs) via diimide-activated amidation between the carboxyl groups on the CNT surface and amine groups on the detection DNA probes. Sandwich-type DNA hybridization reactions were performed on the LFB and the captured MWCNTs on test zone and control zone of LFB produced the characteristic black bands, enabling visual detection of DNA sequences. Combining the advantages of lateral flow chromatographic separation with unique physical properties of MWCNT (large surface area), the optimized LFB was capable of detecting of 0.1 nM target DNA without instrumentation. Quantitative detection could be realized by recording the intensity of the test line with the Image J software, and the detection limit of 40 pM was obtained. This detection limit is 12.5 times lower than that of gold nanoparticle (GNP)-based LFB (0.5 nM, Mao et al. Anal. Chem. 2009, 81, 1660-1668). Another important feature is that the preparation of MWCNT-DNA conjugates was robust and the use of MWCNT labels avoided the aggregation of conjugates and tedious preparation time, which were often met in the traditional GNP-based nucleic acid LFB. The applications of MWCNT-based LFB can be extended to visually detect protein biomarkers using MWCNT-antibody conjugates. The MWCNT-based LFB thus open a new door to prepare a new generation of LFB, and shows great promise for in-field and point-of-care diagnosis of genetic diseases and for the detection of infectious agents.

Chemiluminescence imaging for a protein assay via proximity-dependent DNAzyme formation

An array-based chemiluminescence (CL) imaging method is presented for simple and high throughput detection of protein targets via the formation of a proximity-dependent DNAzyme to produce sensitive CL signal. The protein array is prepared by covalently immobilizing single-stranded guanine-rich nucleic acid 1-labeled antibody 1 (GDNA1-Ab1) or GDNA-thrombin aptamer subunit 1 (Apt-P1) as the capture probe on each sensing site on an aldehyde-functionalized disposable glass chip. In the presence of target protein, hemin, and another GDNA2-Ab2 or Apt-P2 probe, a sandwich complex among the protein and two probes can be formed to trigger the proximity assembly of GDNA1, hemin, and GDNA2, which leads to the formation of hemin-G-quadruplex DNAzyme. At different sensing sites, the DNAzyme-induced CL signals are simultaneously collected by a charge-coupled device for imaging readout of the sensing events. As a proof of concept, the proposed array-based CL imaging strategy is applied to detect carcinoembryonic antigen and thrombin and shows wide linear ranges over 4 and 5 orders of magnitude with the detection limits of 0.15 ng mL(-1) and 0.49 pM, respectively. Benefiting from the one-step proximity-dependent DNAzyme formation, the assay method is extremely simple and can be carried out within 40 min. By using different probes, the array can be easily used to detect more protein analytes. The advantages of easy operation, short assay time, good sensitivity, and versatility make it a promising candidate for point-of-care testing and commercial application.

Fabricating a cycloolefin polymer immunoassay platform with a dual-function polymer brush via a surface-initiated photoiniferter-mediated polymerization strategy

The development of technologies for a biomedical detection platform is critical to meet the global challenges of various disease diagnoses. In this study, an inert cycloolefin polymer (COP) support was modified with two-layer polymer brushes possessing dual functions, i.e., a low fouling poly[poly(ethylene glycol) methacrylate] [p(PEGMA)] bottom layer and a poly(acrylic acid) (PAA) upper layer for antibody loading, via a surface-initiated photoiniferter-mediated polymerization strategy for fluorescence-based immunoassay. It was demonstrated through a confocal laser scanner that, for the as-prepared COP-g-PEG-b-PAA-IgG supports, nonspecific protein adsorption was suppressed, and the resistance to nonspecific protein interference on antigen recognition was significantly improved, relative to the COP-g-PAA-IgG references. This strategy for surface modification of a polymeric platform is also applicable to the fabrication of other biosensors.

Enhanced colorimetric immunoassay accompanying with enzyme cascade amplification strategy for ultrasensitive detection of low-abundance protein

Methods based on enzyme labels have been developed for colorimetric immunoassays, but most involve poor sensitivity and are unsuitable for routine use. Herein, we design an enhanced colorimetric immunoassay for prostate-specific antigen (PSA) coupling with an enzyme-cascade-amplification strategy (ECAS-CIA). In the presence of target PSA, the labeled alkaline phosphatase on secondary antibody catalyzes the formation of palladium nanostructures, which catalyze 3,3′,5,5′-tetramethylbenzidine-H₂O₂ system to produce the colored products, thus resulting in the signal cascade amplification. Results indicated that the ECAS-CIA presents good responses toward PSA, and allows detection of PSA at a concentration as low as 0.05 ng mL⁻¹. Intra- and inter-assay coefficients of variation are below 9.5% and 10.7%, respectively. Additionally, the methodology is validated for analysis of clinical serum specimens with consistent results obtained by PSA ELISA kit. Importantly, the ECAS-CIA opens a new horizon for protein diagnostics and biosecurity.

An ultrasensitive colorimetric aptasensor for ATP based on peptide/Au nanocomposites and hemin–G-quadruplex DNAzyme

A self-assembled peptide nanosphere was firstly applied to construct biosensors. A new signal amplification strategy was proposed for colorimetric aptasensor based on PNS/AuNPs composite. The colorimetric aptasensor displayed an ultra-high sensitivity for ATP detection with a LOD of 1.35 pM.

Gold nanoparticle-based enhanced ELISA for respiratory syncytial virus

A highly sensitive colorimetric immunoassay for the detection of RSV by adopting AuNPs as multienzyme carriers was developed.

Proximity-dependent protein detection based on enzyme-assisted fluorescence signal amplification

In this paper, we develop a sensitive fluorescence method for protein detection based on proximity extension and enzyme-assisted signal amplification. In this novel method, pairs of proximity probes are designed, and the recognition elements are integrated into the proximity probes. Then proteins are detected by transforming aptamer or antibody-protein binding signals into DNA detection based on proximity effect. In addition, nick sites are introduced into the proximity probes to amplify the detectable signal. As proof of concept, detection of human α-thrombin and human IgG are demonstrated in this study. The aptamers and antibodies are coupled in the proximity probes as recognition elements for human α-thrombin and human IgG respectively. In the presence of target protein, aptamer or antibody-protein binding signals are transformed into detectable signals by the proximity effect, and can be further amplified by enzyme-assisted strand displacement. The above mentioned strategies consequently bring the limit of detection (LOD) to as low as 1 pM for human α-thrombin and 6 pM for human IgG. Furthermore, this method might be extended to sensitive detection of other proteins by changing recognition elements of proximity probes.

Characterization of carbon nanotube protein corona by using quantitative proteomics

The protein corona of a nanomaterial is a complex layer of proteins spontaneously and stably formed when the material is exposed to body fluids or intracellular environments. In this study, we utilised stable isotope labeling by amino acids in cell culture (SILAC)-based quantitative proteomics to characterise the binding of human cellular proteins to two forms of carbon nanoparticles: namely multi-walled carbon nanotubes (MWCNTs) and carbon black (CB). The relative binding efficiency of over 750 proteins to these materials is measured. The data indicate that MWCNTs and CB bind to vastly different sets of proteins. The molecular basis of selectivity in protein binding is investigated. This study is the first large-scale characterisation of protein corona on CNT, providing the biochemical basis for the assessment of the suitability of CNTs as biomedical tools, and as an emerging pollutant.

FROM THE CLINICAL EDITOR

This team of investigators performed the first large-scale characterization of protein corona on carbon nanotubes, studying 750 proteins and assessing the suitability of CNTs as biomedical tools and as an emerging pollutant.

Nanomaterials and lab-on-a-chip technologies

Lab-on-a-chip (LOC) platforms have become important tools for sample analysis and treatment with interest for DNA, protein and cells studies or diagnostics due to benefits such as the reduced sample volume, low cost, portability and the possibility to build new analytical devices or be integrated into conventional ones. These platforms have advantages of a wide set of nanomaterials (NM) (i.e. nanoparticles, quantum dots, nanowires, graphene etc.) and offer excellent improvement in properties for many applications (i.e. detectors sensitivity enhancement, biolabelling capability along with other in-chip applications related to the specificities of the variety of nanomaterials with optical, electrical and/or mechanical properties). This review covers the last trends in the use of nanomaterials in microfluidic systems and the related advantages in analytical and bioanalytical applications. In addition to the applications of nanomaterials in LOCs, we also discuss the employment of such devices for the production and characterization of nanomaterials. Both framed platforms, NMs based LOCs and LOCs for NMs production and characterization, represent promising alternatives to generate new nanotechnology tools for point-of-care diagnostics, drug delivery and nanotoxicology applications.