Optical Turn-On Sensor Based on Graphene Oxide for Selective Detection of d-Glucosamine

Exploration of the impact of graphene oxide, acetylenic gemini, and CTAT on the photophysical and aggregation properties of dipolar coumarin 153

Advanced spectroscopic techniques have been utilized to study the interaction between the laser dye coumarin 153 (C153) and graphene oxide (GO) nanoparticles. GO was synthesized using a modified Hummers' method and characterized by UV-vis spectroscopy, Raman laser spectroscopy, FTIR-ATR spectroscopy, FESEM, HR-TEM, and XRD techniques. The GO@C153 composite was formed by mixing two aqueous solutions of GO and C153 due to their strong interaction through stacking and hydrophobic interactions. In this case, GO acts as an effective fluorescence quencher for C153 molecules, which undergo H-type aggregation in the presence of GO. The Stern-Volmer equation and time-dependent fluorescence studies were utilized to analyse the mechanism of fluorescence quenching. According to the findings, both static and dynamic quenching processes are responsible for the reduction in fluorescence intensity. The effect of surfactants (both cetyltrimethylammonium p-toluenesulfonate (CTAT) and synthesized N,N'-dihexadecyl-N,N,N',N'-tetramethyl-N,N'-but-2-ynediyl-di-ammonium chloride (16-4-16)) on the aggregation and photophysical properties of the dye was investigated using surface tensiometry, conductometry, UV-vis absorption spectroscopy, steady-state fluorescence measurements, DLS, and time-dependent fluorescence spectroscopy. Surfactants change the microenvironment of the C153 dye, leading to spectrum shifting and a higher quantum yield, which causes a rapid rise in fluorescence intensity in the micellar medium. It has been noted that in a micellar medium rather than in an aqueous one, the luminous intramolecular charge transfer (ICT) state of C153 stabilises. Lastly, we investigated the photophysical behavior of the GO-C153-micelle ternary system and discovered that, in the presence of a micellar medium, the quenched and blue-shifted (H-type aggregation) fluorescence peak of C153 (in the presence of GO) began to intensify once more. The main goal of this work is to create an effective and fairly cost powerful fluorescence sensor. Additionally, the ternary system (GO-C153-micelle) analytical idea can be employed to identify the onset of micelle formation. In wastewater treatment analysis, the GO-C153-surfactant ternary system concept can also be used to regenerate the adsorbent (in this case, GO) from dye molecules by allowing the dye molecules to exit the adsorbent and enter the micellar medium.

An On-off Supramolecular Fluorescence Switch for Detection of Pb2+ Ions and Vitamin C

β-cyclodextrin-hydroxyquinoline functionalized graphene oxide (GO-CD-HQ) was facilely fabricated to monitor and quantitatively analyze cations in aqueous media. The optical probe was notably selective enhanced toward Pb²⁺ ions over the other tested ions like Cu²⁺, Hg²⁺, Ca²⁺, Na⁺, K⁺, Zn²⁺, Fe²⁺, Fe³⁺, Ag⁺, Mg²⁺, and Cd²⁺ at 468 nm as an emission wavelength. The probe was shown the best performance in pH value, 5, and optimum time 1 min. Absorption spectra have clearly confirmed the static type fluorescence enhancement mechanism of GO-CD-HQ. Under the optimal conditions, the detection limit of it and linear concentration range for Pb²⁺ ions were obtained as 3.72 × 10^-5 M and (5-60) × 10^-5 M, respectively. Additionally, the developed assay exhibited logic gate behavior with Pb²⁺ ions and vitamin C as a masking agent for cited ions.

Understanding the selective-sensing mechanism of lysine by fluorescent nanosensors based on graphene quantum dots

The selectivity of single-amino acid nanosensors is still not well understood. Herein, the factors that govern graphene-based nanomaterials for the selective detection of lysine are reported to guide the design of single-amino acid nanosensors. Graphene quantum dots (GQDs), nitrogen-doped GQDs (N-GQDs), and nitrogen/sulfur co-doped GQDs (N,S-GQDs) were used to sense lysine. The interaction mode and mechanism adjusted selectivity of the zero-dimensional graphene-based quantum dots to lysine ascribe to the solution behavior, molecular size, number of atoms as electron donors in graphene, and driving force. Being a basic amino acid, lysine is protonated with a positive charge below solution pH of 9. It adsorbed on the graphene-based quantum dots via electrostatic attraction, which blocked the internal charge transfer pathway inducing fluorescence enhancement at 420 nm. The protonated ɛ-amine side of lysine is responsible for the course. The small diameter of the lysine of ɛ-amine (<0.35 nm) favored its approach to the quantum dots, resulting in a fluorescence change, which could not be achieved with the larger arginine. The activated sites for interaction with lysine located at the edges of the layers of graphene to reach high selectivity. The N-GQDs and N,S-GQDs are much more sensitive to lysine than the GQDs because they contain nitrogen atoms as electron donors. They had similar linear detection ranges and detection limits, which suggested that the contribution of sulfur for lysine detection was minor. The results of this study provide new insights into the design of GQDs-based single-analyte nanosensors with high selectivity.

6-Polyamino-substituted quinolines: synthesis and multiple metal (CuII, HgII and ZnII) monitoring in aqueous media

Chemoselective palladium-catalyzed arylation of polyamines with 6-bromoquinoline has been explored to prepare chelators for the detection of metal cations in aqueous media. The introduction of a single aromatic moiety into non-protected polyamine molecules was achieved using the commercially available Pd(dba)2/BINAP precatalyst to afford nitrogen chelators, in which the aromatic signalling unit is directly attached to the polyamine residue. Water-soluble receptors were then synthesized using N-alkylation of these polyamines by hydrophilic coordinating residues. By combining rich photophysical properties of the 6-aminoquinoline unit with a high coordination affinity of chelating polyamines and a hydrophilic character of carboxamido-substituted phosphonic acid diesters in a single molecular device, we synthesized chemosensor 5 for selective double-channel (UV-vis and fluorescence spectroscopies) detection of CuII ions in aqueous media at physiological levels. This receptor is suitable for the analysis of drinking water and fabrication of paper test strips for the naked-eye detection of CuII ions under UV-light. By increasing the number of donor sites we also obtained chemosensor 6 which is efficient for the detection of HgII ions. Moreover, chemosensor 6 is also suitable for multiple detection of metal ions because it chelates not only HgII but also CuII and ZnII ions displaying different responses of emission in the presence of these three cations.

A graphene oxide-based fluorescent sensor for recognition of glutamate in aqueous solutions and bovine serum

A novel fluorescence probe based on graphene-aminofluorescein (GAF) for sensing glutamate is prepared by modifying graphene oxide (GO) with 5-aminofluorescein (AF), and shows high sensitivity and selectivity. The strong fluorescence of the GAF probe is quenched in the presence of glutamate, and the quenching exhibits a good linear relationship with the glutamate concentration within the range of 1-45 mg/L. In bovine serum, the accurate quantitation of glutamate is possible within the range of 6 mg/L to 30 mg/L. At the pH of 3.32 (close to the isoelectric point of glutamate), GAF can selectively detect glutamate in preference to other amino acids. The high sensitivity and specificity of this sensor enable a new method for the detection of glutamate in aqueous solutions and serums.

A novel electrochemical sensor based on Au nanoparticles/8-aminoquinoline functionalized graphene oxide nanocomposite for paraquat detection

In this paper, a novel electrochemical sensor based on Au nanoparticles/8-aminoquinoline functionalized graphene oxide (AuNPs/GAQ) nanocomposite was developed and tested for the first time for detection of paraquat (PQ). The morphology and composition of AuNPs/GAQ nanocomposite were characterized by various techniques, including transmission electron microscopy, Fourier transform infrared spectroscopy, Raman spectroscopy, and x-ray photoelectron spectroscopy. Cyclic voltammetry and differential pulse voltammetry were utilized to investigate the electrochemical performances of AuNPs/GAQ nanocomposite modified glassy carbon electrode. The obtained modified electrode exhibited excellent electrocatalytic activity towards detection of PQ. Under the optimized conditions, the proposed sensor showed low detection limit (6 nM, S/N = 3), wide linear range (0.02-24 μM), high selectivity and good stability. In addition, it was successfully applied for detection of PQ in natural water samples with satisfactory results.

Functionalization of graphene: does the organic chemistry matter?

Reactions applying amidation- or esterification-type processes and diazonium salts chemistry constitute the most commonly applied synthetic approaches for the modification of graphene-family materials. This work presents a critical assessment of the amidation and esterification methodologies reported in the recent literature, as well as a discussion of the reactions that apply diazonium salts. Common misunderstandings from the reported covalent functionalization methods are discussed, and a direct link between the reaction mechanisms and the basic principles of organic chemistry is taken into special consideration.

pH-Responsive Fluorescence Enhancement in Graphene Oxide-Naphthalimide Nanoconjugates: A Fluorescence Turn-On Sensor for Acetylcholine

A pH-sensitive, fluorescence "turn-on" sensor based on a graphene oxide-naphthalimide (GO-NI) nanoconjugate for the detection of acetylcholine (ACh) by monitoring the enzymatic activity of acetylcholinesterase (AChE) in aqueous solution is reported. These nanoconjugates were synthesized by covalently anchoring picolyl-substituted NI derivatives on the GO/reduced GO surface through a 1-ethyl-3-(3-dimethylaminopropyl)carbodiimide/N-hydroxysuccinimide coupling strategy, and the morphological and photophysical properties were studied in detail. Synergistic effects of π-π interactions between GO and the NI chromophore, and efficient photoinduced electron- and energy-transfer processes, were responsible for the strong quenching of fluorescence of these nanoconjugates, which were perturbed under acidic pH conditions, leading to significant enhancement of fluorescence emission. This nanoconjugate was successfully employed for the efficient sensing of pH changes caused by the enzymatic activity of AChE, thereby demonstrating its utility as a fluorescence turn-on sensor for ACh in the neurophysiological range.

The Application of Whole Cell-Based Biosensors for Use in Environmental Analysis and in Medical Diagnostics

Various whole cell-based biosensors have been reported in the literature for the last 20 years and these reports have shown great potential for their use in the areas of pollution detection in environmental and in biomedical diagnostics. Unlike other reviews of this growing field, this mini-review argues that: (1) the selection of reporter genes and their regulatory proteins are directly linked to the performance of celllular biosensors; (2) broad enhancements in microelectronics and information technologies have also led to improvements in the performance of these sensors; (3) their future potential is most apparent in their use in the areas of medical diagnostics and in environmental monitoring; and (4) currently the most promising work is focused on the better integration of cellular sensors with nano and micro scaled integrated chips. With better integration it may become practical to see these cells used as (5) real-time portable devices for diagnostics at the bedside and for remote environmental toxin detection and this in situ application will make the technology commonplace and thus as unremarkable as other ubiquitous technologies.

A novel silicon-oxygen aurone derivative assisted by graphene oxide as fluorescence chemosensor for fluoride anions

A novel silicon-oxygen aurone derivative TBDPSA was synthesized and used for the detection of fluoride anions in aqueous solution based on a specifically F^--triggered silicon-oxygen cleavage. Even though the compound has shown high selectivity, obvious absorption and fluorescence response for fluoride anions in aqueous solution, but it also is suffered from many limits, such as low detection sensitivity and long response time. Here the compound was successfully assembled on the graphene oxide (GO) surface by π-π stacking. GO improves recognition sensitivity and shortens response time of TBDPSA for fluoride anions by taking advantage of the nanocarrier GO. Compared with TBDPSA, the response time of GO/TBDPSA is shortened greatly from 1h to <5s and the detection limit is lowered about four times with fluorescence as detected signal. Generally speaking, GO is an excellent promoter for accelerate recognition.

Mimicking multivalent protein–carbohydrate interactions for monitoring the glucosamine level in biological fluids and pharmaceutical tablets

Easily synthesizable ESIPT probe for dual mode sensing of glucosamine in pure water.

A highly selective turn-on fluorescent sensor for glucosamine from amidoquinoline-napthalimide dyads

Three amidoquinoline-naphthalimide dyads are designed and synthesized in 67-73% overall yields in 3 steps from commercially available starting materials. Compounds with unsubstituted and nitro naphthalimide (1 and 2) show excellent selective fluorescent responses towards glucosamine with the enhancement of fluorescence quantum yields by 14 folds. The determination of HOMO-LUMO levels by linear sweep voltammetry suggests that the sensing mechanism likely involves the inhibition of photo-induced electron transfer (PET) between the aminoquinoline and naphthalimide moieties by glucosamine. The association constants of 1.55×10(4) and 1.45×10(4)M(-)(1), along with the glucosamine detection limits of 1.06 and 0.29µM are determined for 1 and 2, respectively. The application of 2 as a fluorescent probe for real-time detection of cellular glucosamine at micromolar level in living Caco-2 cells is also demonstrated.

Graphene oxide: strategies for synthesis, reduction and frontier applications

In this review article, we describe a general introduction to GO, its synthesis, reduction and some selected frontier applications. Its low cost and potential for mass production make GO a promising building block for functional hybrid materials.

Phenylboronic acid functionalized reduced graphene oxide based fluorescence nano sensor for glucose sensing

Reduced graphene has emerged as promising tools for detection based application of biomolecules as it has high surface area with strong fluorescence quenching property. We have used the concept of fluorescent quenching property of reduced graphene oxide to the fluorescent probes which are close vicinity of its surface. In present work, we have synthesized fluorescent based nano-sensor consist of phenylboronic acid functionalized reduced graphene oxide (rGO-PBA) and di-ol modified fluorescent probe for detection of biologically important glucose molecules. This fluorescent graphene based nano-probe has been characterized by high resolution transmission electron microscope (HRTEM), Atomic force microscope (AFM), UV-visible, Photo-luminescence (PL) and Fourier transformed infrared (FT-IR) spectroscopy. Finally, using this PBA functionalized reduced GO based nano-sensor, we were able to detect glucose molecule in the range of 2 mg/mL to 75 mg/mL in aqueous solution of pH7.4.

A novel graphene oxide-based fluorescent nanosensor for selective detection of Fe(3+) with a wide linear concentration and its application in logic gate

A graphene oxide-based fluorescent nanosensor AGO has been designed and synthesized by covalent grafting allylamine onto GO surface. In aqueous media, AGO displays a highly selective and sensitive discrimination of Fe(3+) from Fe(2+) and other metal ions through electron transfer-induced fluorescence quenching. The quenching of AGO fluorescence is linearly proportional to Fe(3+) concentration in a wide range of 0-120 μM (correlation coefficient R(2)=0.9994). Moreover, AGO can be used to construct a combinational three-input logic gate to discriminate Fe(3+) and Fe(2+). The logic gate works well in intracellular fluorescence imaging, which shows a potential as a promising platform for biosensing analysis.

Fluorescent graphene oxide via polymer grafting: an efficient nanocarrier for both hydrophilic and hydrophobic drugs

Functionalized graphene-based drug delivery vehicles have conquered a significant position because functionalization improves its biocompatibility and stability in cell medium, leaving sufficient graphitic basal plane for drug loading through π-π stacking. In this study, poly(N-isopropylacrylamide) (PNIPAM) is covalently grafted from the surface of graphene oxide (GO) via a facile, eco-friendly and an easy procedure of free radical polymerization (FRP) using ammonium persulfate initiator. Various spectroscopic and microscopic studies confirm the successful grafting of PNIPAM from GO surface. PNIPAM-grafted GO (GPNM) exhibits enhanced thermal stability, improved dispersibility both in aqueous and cell medium, and better biocompatibility and cell viability compared to GO. Interestingly, GPNM displays an exciting fluorescence property in aqueous medium, which is a hike of intensity at 36 °C due to the lower critical solution temperature (LCST) of PNIPAM chains (32 °C). Moreover both hydrophilic (doxorubicin (DOX)) and hydrophobic (indomethacin (IMC)) drugs loaded on the surface of GPNM hybrid exhibits its efficacy as an efficient carrier for both types of drugs. Cellular uptakes of free DOX and DOX-loaded GPNM (GPNM-DOX) are evidenced both from optical and fluorescence imaging of live cells, and the efficiency of drug is significantly improved in the loaded system. The release of DOX from GPNM-DOX was achieved at pH 4, relevant to the environment of cancer cells. The pH-triggered release of hydrophobic drug was also studied using UV-vis spectroscopy via alginate encapsulation, showing a great enhancement at pH = 7.4. The IMC is also found to be released by human serum albumin using dialysis technique. The GPNM nanomaterial shows the property of simultaneous loading of DOX and IMC as well as pH-triggered simultaneous release of both of the drugs.

A highly selective fluorescent sensor for glucosamine

A new fluorescent chemical sensor with a multifunctional binding pocket produces high selectivity for glucosamine over related biomolecules.

Applications of graphene and related nanomaterials in analytical chemistry

Graphene and its related materials remain a very bright and exciting prospect in analytical chemistry.

T. V, Thomas S, Sadasivuni KK. Graphene and graphitic derivative filled polymer composites as potential sensors

Graphite and numerous graphitic-derived micro- and nano-particles have gained importance in current materials science research.

Tuning the activities and structures of enzymes bound to graphene oxide with a protein glue

Graphene oxide (GO) is being investigated extensively for enzyme and protein binding, but many enzymes bound to GO denature considerably and lose most of their activities. A simple, novel, and efficient approach is described here for improving the structures and activities of enzymes bound to GO such that bound enzymes are nearly as active as those of the corresponding unbound enzymes. Our strategy is to preadsorb highly cationized bovine serum albumin (cBSA) to passivate GO, and cBSA/GO (bGO) served as an excellent platform for enzyme binding. The binding of met-hemoglobin, glucose oxidase, horseradish peroxidase, BSA, catalase, lysozyme, and cytochrome c indicated improved binding, structure retention, and activities. Nearly 100% of native-like structures of all the seven proteins/enzymes were noted at near monolayer formation of cBSA on GO (400% w/w), and all bound enzymes indicated 100% retention of their activities. A facile, benign, simple, and general method has been developed for the biofunctionalization of GO, and this approach of coating with suitable protein glues expands the utility of GO as an advanced biophilic nanomaterial for applications in catalysis, sensing, and biomedicine.

Multicolour probes for sequence-specific DNA detection based on graphene oxide

The bifunctionality of graphene oxide (GO) which can highly adsorb single-stranded DNA (ssDNA) and effectively quench the emission of organic dyes is reasonably utilized in a multiplexed DNA detection system, achieving sensitive and selective detection of HIV, VV and EV, respectively.