Sensitive electrochemiluminescence detection of c-Myc mRNA in breast cancer cells on a wireless bipolar electrode

Hydrothermal Fabrication of Efficient Binary Pd/Ag2S Heterojunction Composites: Synthesis, Characterization, and Fluorometric Selective Sensing of Organophosphate Pesticides

Although many plasmonic nanosensors have been established for the detection of analytes, few of them are feasible for analyzing natural samples with very complex matrices because of insufficient method selectivity. To address this challenge, we propose an epitaxial and lattice-mismatch approach to the synthesis of a unique Pd/Ag2S nanostructure, which consists of a Pd segment with excellent plasmonic characteristics, and a highly stable Ag2S portion with minimum solubility product (Ksp(Ag2S) = 6.3 × 10- 50). Hence, Ag2S nanoparticles (NPs) and optimized (10.05 mmol/L) Pd/Ag2S composite were prepared using a hydrothermal method. The fabricated samples were characterized using different tools including UV-vis DRS, PL, powder XRD, TEM, and BET surface area measurements. Furthermore, the fluorometric sensing performance of the Ag2S and Pd/Ag2S samples was examined in the detection of organophosphate pesticides such as MLT, PRT, DZN, FNT, DCL, MCP, and CPS pesticides at room temperature. The quantitative detection of MLT, PRT, DZN, FNT, DCL, MCP, and CPS pesticides was achieved based on the Pd/Ag2S composite and organophosphate group-specific interaction. The optimized sensor exhibited a lower limit of detection (3.08 µM), excellent reproducibility, selectivity, and stability with an enhanced sensitivity of - 207.1 µA/µM cm2 (R2 = 0.98) in the range of 10 µM-100 µM for the detection of CPS pesticide. In addition, the fluorometric sensor has excellent selectivity, reproducibility, and stability, providing a feasible method for not only the detection of CPS pesticides but also other analytes in the future.

Newly Developed Electrochemiluminescence Based on Bipolar Electrochemistry for Multiplex Biosensing Applications: A Consolidated Review

Recently, there has been an upsurge in the extent to which electrochemiluminescence (ECL) working in synergy with bipolar electrochemistry (BPE) is being applied in simple biosensing devices, especially in a clinical setup. The key objective of this particular write-up is to present a consolidated review of ECL-BPE, providing a three-dimensional perspective incorporating its strengths, weaknesses, limitations, and potential applications as a biosensing technique. The review encapsulates critical insights into the latest and novel developments in the field of ECL-BPE, including innovative electrode designs and newly developed, novel luminophores and co-reactants employed in ECL-BPE systems, along with challenges, such as optimization of the interelectrode distance, electrode miniaturization and electrode surface modification for enhancing sensitivity and selectivity. Moreover, this consolidated review will provide an overview of the latest, novel applications and advances made in this field with a bias toward multiplex biosensing based on the past five years of research. The studies reviewed herein, indicate that the technology is rapidly advancing at an outstanding purse and has an immense potential to revolutionize the general field of biosensing. This perspective aims to stimulate innovative ideas and inspire researchers alike to incorporate some elements of ECL-BPE into their studies, thereby steering this field into previously unexplored domains that may lead to unexpected, interesting discoveries. For instance, the application of ECL-BPE in other challenging and complex sample matrices such as hair for bioanalytical purposes is currently an unexplored area. Of great significance, a substantial fraction of the content in this review article is based on content from research articles published between the years 2018 and 2023.

Cu-MOFs/GOx Bifunctional Probe-Based Synergistic Signal Amplification Strategy: Toward Highly Sensitive Closed Bipolar Electrochemiluminescence Immunoassay

A closed bipolar electrochemiluminescence (BP-ECL) platform for sensitive prostate specific antigen (PSA) detection was proposed based on a novel synergistic signal amplification strategy. Specifically, glucose oxidase-loaded Cu-based metal-organic frameworks (Cu-MOFs/GOx) as bifunctional probes were bridged on the anodic interface with the target PSA as the intermediate unit. In virtue of the large loading capacity of Cu-MOFs, a large amount of a co-reactant, i.e., H₂O₂ in this L-012-based ECL system and gluconic acid were generated on the anodic pole in the presence of glucose. The generated gluconic acid could effectively degrade the Cu-MOFs to release Cu²⁺ which greatly accelerates the formation of highly active intermediates from co-reactant H₂O₂, boosting the ECL intensity. As for the cathodic pole, K₃Fe(CN)₆ with a lower reduction potential is used to reduce the driving voltage and speed up the reaction rate, further strengthening the ECL intensity. Thanks to the synergistic signal amplification effect at both two electrode poles of the BP-ECL system, highly sensitive detection of PSA was realized with a detection limit of 5.0 × 10^-14 g/mL and a wide linear range of 1.0 × 10^-13-1.0 × 10^-7 g/mL. The strategy provides a novel way for signal amplification in the BP-ECL biosensing field.

Nanotechnology‐based electrochemical biosensors for monitoring breast cancer biomarkers

Breast cancer is categorized as the most widespread cancer type among women globally. On-time diagnosis can decrease the mortality rate by making the right decision in the therapy procedure. These features lead to a reduction in medication time and socioeconomic burden. The current review article provides a comprehensive assessment for breast cancer diagnosis using nanomaterials and related technologies. Growing use of the nano/biotechnology domain in terms of electrochemical nanobiosensor designing was discussed in detail. In this regard, recent advances in nanomaterial applied for amplified biosensing methodologies were assessed for breast cancer diagnosis by focusing on the advantages and disadvantages of these approaches. We also monitored designing methods, advantages, and the necessity of suitable (nano) materials from a statistical standpoint. The main objective of this review is to classify the applicable biosensors based on breast cancer biomarkers. With numerous nano-sized platforms published for breast cancer diagnosis, this review tried to collect the most suitable methodologies for detecting biomarkers and certain breast cancer cell types.

Emerging Optical Microscopy Techniques for Electrochemistry

An optical microscope is probably the most intuitive, simple, and commonly used instrument to observe objects and discuss behaviors through images. Although the idea of imaging electrochemical processes operando by optical microscopy was initiated 40 years ago, it was not until significant progress was made in the last two decades in advanced optical microscopy or plasmonics that it could become a mainstream electroanalytical strategy. This review illustrates the potential of different optical microscopies to visualize and quantify local electrochemical processes with unprecedented temporal and spatial resolution (below the diffraction limit), up to the single object level with subnanoparticle or single-molecule sensitivity. Developed through optically and electrochemically active model systems, optical microscopy is now shifting to materials and configurations focused on real-world electrochemical applications.

A spatially resolved ratiometric electrochemiluminescence immunosensor for myoglobin detection using Au@Ag2S as signal amplification tags

A spatially resolved ratiometric ECL immunosensor for myoglobin detection was developed via resonance energy transfer for signal amplification.

Ultrasensitive Detection of RNA with Single-Base Resolution by Coupling Electrochemical Sensing Strategy with Chimeric DNA Probe-Aided Ligase Chain Reaction

Accurate and sensitive detection of single-base mutations in RNAs is of great value in basic studies of life science and medical diagnostics. However, the current available RNA detection methods are challenged by heterogeneous clinical samples in which trace RNA mutants usually existed in a large pool of normal wild sequences. Thus, there is still great need for developing the highly sensitive and highly specific methods in detecting single-base mutations of RNAs in heterogeneous clinical samples. In the present study, a new chimeric DNA probe-aided ligase chain reaction-based electrochemical method (cmDNA-eLCR) was developed for RNA mutation detection through the BSA-based carrier platform and the horseradish peroxidase-hydrogen peroxide-tetramethylbenzidine (HRP-H₂O₂-TMB) system. The denaturing polyacrylamide gel electrophoresis and a fluorophore-labeled probe was ingeniously designed to demonstrate the advantage of cmDNA in ligation to normal DNA templated by RNA with the catalysis of T4 RNA ligase 2 as well as its higher selectivity than DNA ligase system. Finally, the proposed cmDNA-eLCR, compared with the traditional eLCR, showed excellent performance in discriminating single base-mismatched sequences, where the signal response for mismatched targets at a high concentration could overlap completely with that for the blank control. Besides, this cmDNA-eLCR assay had a wide linear range crossing six orders of magnitude from 1.0 × 10^-15 to1.0 × 10^-10 M with a limit of detection as low as 0.6 fM. Furthermore, this assay was applied to detect RNA in real sample with a satisfactory result, thereby demonstrating its great potential in diagnosis of RNA-related diseases.

Nucleic Acids Analysis

Nucleic acids are natural biopolymers of nucleotides that store, encode, transmit and express genetic information, which play central roles in diverse cellular events and diseases in living things. The analysis of nucleic acids and nucleic acids-based analysis have been widely applied in biological studies, clinical diagnosis, environmental analysis, food safety and forensic analysis. During the past decades, the field of nucleic acids analysis has been rapidly advancing with many technological breakthroughs. In this review, we focus on the methods developed for analyzing nucleic acids, nucleic acids-based analysis, device for nucleic acids analysis, and applications of nucleic acids analysis. The representative strategies for the development of new nucleic acids analysis in this field are summarized, and key advantages and possible limitations are discussed. Finally, a brief perspective on existing challenges and further research development is provided.

CRISPR/Cas13a Powered Portable Electrochemiluminescence Chip for Ultrasensitive and Specific MiRNA Detection

MicroRNAs (miRNAs) have been widely investigated as potential biomarkers for early clinical diagnosis of cancer. Developing an miRNA detection platform with high specificity, sensitivity, and exploitability is always necessary. Electrochemiluminescence (ECL) is an electrogenerated chemiluminescence technology that greatly decreases background noise and improves detection sensitivity. The development of a paper-based ECL biosensor further makes ECL suitable for point-of-care detection. Recently, clustered regularly interspaced short palindromic repeats (CRISPR)/Cas13a as high-fidelity, efficient, and programmable CRISPR RNA (crRNA) guided RNase has brought a next-generation biosensing technology. However, existing CRISPR/Cas13a based detection often faces a trade-off between sensitivity and specificity. In this research, a CRISPR/Cas13a powered portable ECL chip (PECL-CRISPR) is constructed. Wherein target miRNA activates Cas13a to cleave a well-designed preprimer, and triggers the subsequent exponential amplification and ECL detection. Under optimized conditions, a limit-of-detection of 1 × 10-15 m for miR-17 is achieved. Through rationally designing the crRNA, the platform can provide single nucleotide resolution to dramatically distinguish miRNA target from its highly homologous family members. Moreover, the introduction of "light-switch" molecule [Ru(phen)2dppz]2+ allows the platform to avoid tedious electrode modification and washing processes, thereby simplifying the experimental procedure and lower testing cost. Analysis results of miRNA from tumor cells also demonstrate the PECL-CRISPR platform holds a promising potential for molecular diagnosis.

Recent Advances in Electrochemiluminescence-Based Systems for Mammalian Cell Analysis

Mammalian cell analysis is essential in the context of both fundamental studies and clinical applications. Among the various techniques available for cell analysis, electrochemiluminescence (ECL) has attracted significant attention due to its integration of both electrochemical and spectroscopic methods. In this review, we summarize recent advances in the ECL-based systems developed for mammalian cell analysis. The review begins with a summary of the developments in luminophores that opened the door to ECL applications for biological samples. Secondly, ECL-based imaging systems are introduced as an emerging technique to visualize single-cell morphologies and intracellular molecules. In the subsequent section, the ECL sensors developed in the past decade are summarized, the use of which made the highly sensitive detection of cell-derived molecules possible. Although ECL immunoassays are well developed in terms of commercial use, the sensing of biomolecules at a single-cell level remains a challenge. Emphasis is therefore placed on ECL sensors that directly detect cellular molecules from small portions of cells or even single cells. Finally, the development of bipolar electrode devices for ECL cell assays is introduced. To conclude, the direction of research in this field and its application prospects are described.

Optical imaging of the potential distribution at transparent electrode/solution interfaces

Optical monitoring of the electrode potential and imaging of its distribution on transparent electrodes are achieved by using OIRD technology.

Label-Free Ratiometric Electrochemiluminescence Aptasensor Based on Nanographene Oxide Wrapped Titanium Dioxide Nanoparticles with Potential-Resolved Electrochemiluminescence

A new "one-pot" hydrothermal method was developed for the preparation of electrochemiluminescence (ECL) nanoluminophores nanographene oxide wrapping titanium dioxide (nGO@TiO₂ NLPs). The characterization demonstrated that nGO@TiO₂ NLPs possessed a core-shell-like shape. The nGO@TiO₂ NLPs exhibited potential-resolved ECL property in neutral aqueous solution using K₂S₂O₈ as a coreactant. On this basis, a label-free ratiometric ECL aptasensor was designed. nGO@TiO₂ NLPs were used to fabricate the ECL interface for target recognition, potential-resolved ECL signal generation, and amplification. In the presence of cardiac troponin I (cTnI), the aptamer resides from the electrode surface owing to its rigidity, resulting in a reduction in charge transfer resistance of the modified working electrode and a ratio enhancement of two ECL signals of nGO@TiO₂ NLPs. According to the increased ECL ratio, cTnI could be determined by the ratiometric ECL aptasensor, with a linear dynamic range of 1.0 × 10^-13-1.0 × 10^-10 mol/L and a detection limit of 4.0 × 10^-14 mol/L, which is superior to most reported electrochemical methods. This label-free ratiometric ECL strategy with self-calibrating ability and accurate, ultrasensitive, rapid, specific analytical performance showed great promise in biosensing and clinical diagnosis. The developed strategy might extend for the sensing of other protein biomarkers by using corresponding antibodies or aptamers as recognition elements.

Microscale and Nanoscale Electrophotonic Diagnostic Devices

Detecting and identifying infectious agents and potential pathogens in complex environments and characterizing their mode of action is a critical need. Traditional diagnostics have targeted a single characteristic (e.g., spectral response, surface receptor, mass, intrinsic conductivity, etc.). However, advances in detection technologies have identified emerging approaches in which multiple modes of action are combined to obtain enhanced performance characteristics. Particularly appealing in this regard, electrophotonic devices capable of coupling light to electron translocation have experienced rapid recent growth and offer significant advantages for diagnostics. In this review, we explore three specific promising approaches that combine electronics and photonics: (1) assays based on closed bipolar electrochemistry coupling electron transfer to color or fluorescence, (2) sensors based on localized surface plasmon resonances, and (3) emerging nanophotonics approaches, such as those based on zero-mode waveguides and metamaterials.

Ultrasensitive quantification of tumor mRNAs in extracellular vesicles with an integrated microfluidic digital analysis chip

Extracellular vesicles (EVs) present a promising liquid biopsy for cancer diagnosis. However, it remains a daunting challenge to quantitatively measure molecular contents of EVs including tumor-associated mRNAs. Herein, we report a configurable microwell-patterned microfluidic digital analysis platform combined with a dual-probe hybridization assay for PCR-free, single-molecule detection of specific mRNAs in EVs. The microwell array in our device is configurable between the flow-through assay mode for enhanced hybridization capture and tagging of mRNAs and the digital detection mode based on femtoliter-scale enzymatic signal amplification for single-molecule counting of surface-bound targets. Furthermore, a dual-probe hybridization assay has been developed to enhance the sensitivity of the digital single-molecule detection of EV mRNAs. Combining the merits of the chip design and the dual-probe digital mRNA hybridization assay, the integrated microfluidic system has been demonstrated to afford quantitative detection of synthetic GAPDH mRNA with a LOD as low as 20 aM. Using this technology, we quantified the level of GAPDH and EWS-FLI1 mRNAs in EVs derived from two cell lines of peripheral primitive neuroectodermal tumor (PNET), CHLA-9 and CHLA-258. Our measurements detected 64.6 and 43.5 copies of GAPDH mRNA and 6.5 and 0.277 copies of EWS-FLI1 fusion transcripts per 105 EVs derived from CHLA-9 and CHLA-258 cells, respectively. To our knowledge, this is the first demonstration of quantitative measurement of EWS-FLI1 mRNA copy numbers in Ewing Sarcoma (EWS)-derived EVs. These results highlight the ultralow frequency of tumor-specific mRNA markers in EVs and the necessity of developing highly sensitive methods for analysis of EV mRNAs. The microfluidic digital mRNA analysis platform presented here would provide a useful tool to facilitate quantitative analysis of tumor-associated EV mRNAs for liquid biopsy-based cancer diagnosis and monitoring.

Patchy gold coated Fe3O4 nanospheres with enhanced catalytic activity applied for paper-based bipolar electrode-electrochemiluminescence aptasensors

In this work, novel multifunctional patchy gold coated Fe₃O₄ hybrid nanoparticles (PG-Fe₃O₄ NPs) have been successfully synthesized in aqueous medium via a facile adsorption-reduction method. A rational formation mechanism has been proposed by monitoring the morphological evolution. The PG-Fe₃O₄ NPs retained the good magnetic property and exhibited excellent catalytical effeciency towards the electrochemical reduction of hydrogen peroxide. Chronoamperometric and amperometric experiments indicated a relatively high catalytic rate constant of 3.13 × 10⁵ M^-1 s^-1, a high sensitivity of 578.87 µA mM^-1 cm^-2 and a low Michaelis-Menten constant of 462 µM. Meanwhile, the introduction of patchy gold could help biofunctionalization via Au-S bond for different biodetection and biosensing purposes. Here, as an example, thiol-terminated aptamers were immobilized onto the patchy gold part as a signal probe to detect carcinoembryonic antigen (CEA). A related paper-based bipolar electrode-electrochemiluminescence (pBPE-ECL) aptasensor was fabricated as the low-cost, disposable and miniature platform. To improve the sensitivity, Au nanodendrites were electrodeposited at the BPE cathode as the matrix for Apt1 immobilization. This aptasensor showed a wide linear range of 0.1 pg mL^-1-15 ng mL^-1 with a low detection limit of 0.03 pg mL^-1, remaining competitive against other ones, and also demonstrating the PG-Fe₃O₄ NPs have promising potential for catalysis and bioassays.

Visual electrochemiluminescence biosensing of aflatoxin M1 based on luminol-functionalized, silver nanoparticle-decorated graphene oxide

A sensitive electrochemiluminescence (ECL) aptasensor for aflatoxin M1 (AFM1) detection by a closed bipolar electrode (BPE) array has been introduced. The thiolated AFM1 aptamer was immobilized on gold nanoparticle-coated magnetic Fe₃O₄ nanoparticles (Apt-GMNPs). Luminol-functionalized silver nanoparticle-decorated graphene oxide (GO-L-AgNPs) participates in π-π interactions with the unpaired bases of the immobilized aptamer (Apt-GMNPs-GO-L-AgNPs). After the Apt-GMNPs-GO-L-AgNPs were introduced to a gold anodic BPE array, the individual electrodes were subjected to different concentrations of AFM1. Upon the interaction of AFM1 with the aptamers, the GO-L-AgNPs detach from the aptamer; the resulting ECL of luminol and H₂O₂ at the anodic poles is monitored using a photomultiplier tube (PMT) or smartphone, and the images are analyzed using ImageJ software. This process triggers thionine reduction at the cathodic poles. Under the optimal conditions obtained by a face-centered central composite design (FCCD), the PMT-based detection of the BPE-ECL aptasensor exhibit a linear response over a wide dynamic range from 5 to 150ngmL^-1, with a detection limit of 0.01ngmL^-1. Additionally, smartphone-based detection shows a linear relationship between the ECL image gray value and the logarithmic concentration of the AFM1 target over a range of 10-200ngmL^-1, with a detection limit of 0.05ngmL^-1. Furthermore, the BPE-ECL aptasensor was successfully used to detect AFM1 in milk complex media without any serious interferences with reliable reproducibility (average relative standard deviation (RSD = 2.3%)). This smartphone-based detection opens a new horizon for bioanalysis that does not require a trained technician to operate and is a promising technology for point-of-care testing.

Bipolar Electrodes with 100% Current Efficiency for Sensors

A bipolar electrode (BPE) is an electron conductor that is embedded in the electrolyte solution without the direct connection with the external power source (driving electrode). When the sufficient voltage was provided, the two poles of BPE promote different oxidation and reduction reactions. During the past few years, BPEs with wireless feature and easy integration showed great promise in the various fields including asymmetric modification/synthesis, motion control, targets enrichment/separation, and chemical sensing/biosensing combined with the quantitative relationship between two poles of BPE. In this perspective paper, we first describe the concept and history of the BPE for analytical chemistry and then review the recent developments in the application of BPEs for sensing with ultrahigh current efficiency (η_c = i_BPE/i_channel) including the open and closed bipolar system. Finally, we offer the guide for possible challenge faced and solution in the future.

Electrochemiluminescence bipolar electrode array for the multiplexed detection of glucose, lactate and choline based on a versatile enzymatic approach

A simple, efficient and versatile biosensing platform capable of the multiplexed detection for glucose, lactate and choline was developed by the integration of bipolar electrochemistry and electrochemiluminescence (ECL) imaging. The sensing bipolar electrodes (BPEs) were simply modified via a one-step method adaptable to different enzymes. The biorecognition event happening between the substrate and the corresponding enzyme could be directly reported by the ECL emitted on the same pole from luminol and in situ generated H₂O₂. Under optimized conditions, the BPEs array was successfully applied for the determination of glucose, lactate and choline in the ranges of 0.01-1mM, 0.01-1mM and 0.02-5mM, with the LOD of 7.57μM, 8.25μM and 43.19μM, respectively. Owing to the improved stability of in situ generated H₂O₂, a whole series of analytes testing could be completed in the same BPE biochip. Subsequently, an array chip consisting of nine BPEs enabled the concomitant detection of glucose, lactate and choline, demonstrating the capability for multifunctional detection of biomolecules. This versatile analytical system could be easily extended to sensitive screening in a miniaturized device and point of care testing.

Oligonucleotide-based label-free detection with optical microresonators: strategies and challenges

This review targets diversified oligonucleotide-based biodetection techniques, focusing on the use of microresonators of whispering gallery mode (WGM) type as optical biosensors mostly integrated with lab-on-a-chip systems. On-chip and microfluidics combined devices along with optical microresonators provide rapid, robust, reproducible and multiplexed biodetection abilities in considerably small volumes. We present a detailed overview of the studies conducted so far, including biodetection of various oligonucleotide biomarkers as well as deoxyribonucleic acids (DNAs), ribonucleic acids (RNAs) and proteins. We particularly advert to chemical surface modifications for specific and selective biosensing.

Electrogenerated Chemiluminescence Reporting on Closed Bipolar Microelectrodes and the Influence of Electrode Size

We report a fundamental study of the use of Ru(bpy)32+-based electrogenerated chemiluminescence (ECL) as an optical reporting system for the detection of redox-active analyte on closed bipolar microelectrodes, focused on gaining an in-depth understanding of the correlation between ECL emission intensity and electrochemical current. We demonstrate the significant effect that the size of the anodic and cathodic poles has on the resulting ECL signal and show how this influences the quantitative detection of analyte on a closed bipolar electrode. By carefully designing the geometry of the bipolar electrode, the detection performance of the system can be tuned to different analyte concentration ranges. We show that through a simple voltammetric study of the individual reactions, one can understand the coupled bipolar behavior and accurately predict the ECL signal response to a range of analyte concentrations, enabling the accurate prediction of calibration curves.