Development of a peptidase-resistant substrate for single-cell measurement of protein kinase B activation

Assays for tyrosine phosphorylation in human cells

Tyrosine kinases are important for many cellular processes and disruption of their regulation is a factor in diseases like cancer, therefore they are a major target of anticancer drugs. There are many ways to measure tyrosine kinase activity in cells by monitoring endogenous substrate phosphorylation, or by using peptide substrates and incubating them with cell lysates containing active kinases. However, most of these strategies rely on antibodies and/or are limited in how accurately they model the intracellular environment. In cases in which activity needs to be measured in cells, but endogenous substrates are not known and/or suitable phosphospecific antibodies are not available, cell-deliverable peptide substrates can be an alternative and can provide information on activation and inhibition of kinases in intact, live cells. In this chapter, we review this methodology and provide a protocol for measuring Abl kinase activity in human cells using enzyme-linked immunosorbent assay (ELISA) with a generic antiphosphotyrosine antibody for detection.

CPProtectides: Rapid uptake of well-folded β-hairpin peptides with enhanced resistance to intracellular degradation

Cell penetrating peptides (CPPs) have emerged as powerful tools for delivering bioactive cargoes, such as biosensors or drugs to intact cells. One limitation of CPPs is their rapid degradation by intracellular proteases. β-hairpin "protectides" have previously been demonstrated to be long-lived under cytosolic conditions due to their secondary structure. The goal of this work was to demonstrate that arginine-rich β-hairpin peptides function as both protectides and as CPPs. Peptides exhibiting a β-hairpin motif were found to be rapidly internalized into cells with their uptake efficiency dependent on the number of arginine residues in the sequence. Cellular internalization of the β-hairpin peptides was compared to unstructured, scrambled sequences and to commercially available, arginine-rich CPPs. The unstructured peptides displayed greater uptake kinetics compared to the structured β-hairpin sequences; however, intracellular stability studies revealed that the β-hairpin peptides exhibited superior stability under cytosolic conditions with a 16-fold increase in peptide half-life. This study identifies a new class of long-lived CPPs that can overcome the stability limitations of peptide-based reporters or bioactive delivery mechanisms in intact cells.

Selection and optimization of enzyme reporters for chemical cytometry

Chemical cytometry, sensitive analytical measurements of single cells, reveals inherent heterogeneity of cells within a population which is masked or averaged out when using bulk analysis techniques. A particular challenge of chemical cytometry is the development of a suitable reporter or probe for the desired measurement. These reporters must be sufficiently specific for measuring the desired process; possess a lifetime long enough to accomplish the measurement; and have the ability to be loaded into single cells. This chapter details our approach to rationally design and improve peptide substrates as reporters of enzyme activity utilizing chemical cytometry. This method details the iterative approach used to design, characterize, and identify a peptidase-resistant peptide reporter which acts as a kinase substrate within intact cells. Small-scale, rationally designed peptide libraries are generated to rapidly and economically screen candidate reporter peptides for substrate suitability and peptidase resistance. Also detailed are strategies to characterize and validate the designed reporters by determining kinetic parameters, intracellular substrate specificity, resistance to degradation by intracellular peptidases, and behavior within lysates and intact cells.

Effect of Loading Method on a Peptide Substrate Reporter in Intact Cells

Studies of live cells often require loading of exogenous molecules through the cell membrane; however, effects of loading method on experimental results are poorly understood. Therefore, in this work, we compared three methods for loading a fluorescently labeled peptide into cells of the model organism Dictyostelium discoideum. We optimized loading by pinocytosis, electroporation, and myristoylation to maximize cell viability and characterized loading efficiency, localization, and uniformity. We also determined how the loading method affected measurements of enzyme activity on the peptide substrate reporter using capillary electrophoresis. Loading method had a strong effect on the stability and phosphorylation of the peptide. The half-life of the intact peptide in cells was 19 ± 2, 53 ± 15, and 12 ± 1 min, for pinocytosis, electroporation, and myristoylation, respectively. The peptide was phosphorylated only in cells loaded by electroporation. Fluorescence microscopy suggested that the differences between methods were likely due to differences in peptide localization.

Design and Application of Sensors for Chemical Cytometry

The bulk cell population response to a stimulus, be it a growth factor or a cytotoxic agent, neglects the cell-to-cell variability that can serve as a friend or as a foe in human biology. Biochemical variations among closely related cells furnish the basis for the adaptability of the immune system but also act as the root cause of resistance to chemotherapy by tumors. Consequently, the ability to probe for the presence of key biochemical variables at the single-cell level is now recognized to be of significant biological and biomedical impact. Chemical cytometry has emerged as an ultrasensitive single-cell platform with the flexibility to measure an array of cellular components, ranging from metabolite concentrations to enzyme activities. We briefly review the various chemical cytometry strategies, including recent advances in reporter design, probe and metabolite separation, and detection instrumentation. We also describe strategies for improving intracellular delivery, biochemical specificity, metabolic stability, and detection sensitivity of probes. Recent applications of these strategies to small molecules, lipids, proteins, and other analytes are discussed. Finally, we assess the current scope and limitations of chemical cytometry and discuss areas for future development to meet the needs of single-cell research.

N-Gemini peptides: cytosolic protease resistance via N-terminal dimerization of unstructured peptides

Herein we describe a synthetically simple strategy for increasing the lifetime of unstructured peptides in cytosolic environment via dimerization at the N-terminus to block threading into the catalytic cleft of cytosolic proteases. We establish this approach with kinase substrates, allowing for phosphorylation in cells as a demonstration of protease resistance.

Development of β-Hairpin Peptides for the Measurement of SCF-Family E3 Ligase Activity in Vitro via Ornithine Ubiquitination

Regulation of the ubiquitin-proteasome system (UPS) to treat select types of cancer has become a popular area of drug discovery research. The FDA approval of proteasome inhibitors Bortezomib and Carfilzomib in the treatment of multiple myeloma has led to an increased need for chemical reporters capable of detecting and quantifying protein ubiquitination and the activity of members of the UPS including E3 ubiquitin ligases and the proteasome in the tumor cells of the patients. One limitation of peptide-based reporters is their rapid degradation in the cellular environment by cytosolic peptidases. Conversely, β-hairpin "protectides" exhibit a pronounced secondary structure that significantly increases their lifetime under cellular conditions. The goal of this work was to develop a family of novel, ornithine-rich protectides that could act as primary degrons serving as substrates for in vitro ubiquitination. The fluorescent peptide-based reporters were demonstrated to be highly resistant to degradation in multiple myeloma cell lysates. The most stable β-hairpin primary degron, containing a single ornithine residue at the N-terminus, OWRWR [Ac-OWVRVpGO(FAM)WIRQ-NH2], demonstrated rapid ubiquitination kinetics and a 20-fold increase in stability when compared with an unstructured primary degron. A screen of E1 and E3 enzyme inhibitors in cell lysates showed that ubiquitination of OWRWR was significantly impaired by inhibitors of the SCF family of E3 ligases. Furthermore, this is the first report demonstrating the use of an ornithine residue on a primary degron as a ubiquitination site. This study serves as a strong foundation for the development of stable, fluorescent, peptide-based reporters capable of quantifying protein ubiquitination and the enzymatic activity of members of the UPS.

Identification of a p53-based portable degron based on the MDM2-p53 binding region

In recent years the ubiquitin proteasome system (UPS) has garnered increasing interest as a target for chemotherapeutics. Due to the success of the proteasome inhibitors Bortezomib and Carfilzomib in the treatment of multiple myeloma, several new compounds have been developed to target E3 ubiquitin ligases and the proteasome in numerous human cancers. This has increased the need for new analytical methods to precisely measure intracellular enzyme activity in cells. A key component of a desired analytical method is a substrate that is capable of rapid intracellular ubiquitination yet easily incorporated into the next generation of more sophisticated UPS reporters. Portable degradation sequences, or degrons, have the ability to bind to E3 ligases and promote substrate ubiquitination when the sequence is presented in isolation or appended to other entities such as fluorescent peptide-based reporters. Previous work identified an E3 ligase (MDM2)-binding element at p53 amino acids 92-112, which was later demonstrated to be rapidly ubiquitinated in cytosolic lysates effectively functioning as a transportable degron. In this work, a shortened p53 sequence within amino acids 92-112 that displayed rapid ubiquitination kinetics was identified. A nine-member peptide library was synthesized using sequence elements of various sizes and lengths, all based on the initial 22 amino acid long sequence, containing a single ubiquitination site lysine. The ubiquitination kinetics were determined using a combination of gel electrophoresis and analytical high performance liquid chromatography (HPLC) to rank the members of the library and identify the optimal ubiquitination sequence. This analysis identified the five amino acid sequence, KGSYG, corresponding to residues 105-108 with an added N-terminal lysine, as a portable degron since this sequence demonstrated the most rapid ubiquitination kinetics.

Interspecies comparison of peptide substrate reporter metabolism using compartment-based modeling

Peptide substrate reporters are fluorescently labeled peptides that can be acted upon by one or more enzymes of interest. Peptide substrates are readily synthesized and more easily separated than full-length protein substrates; however, they are often more rapidly degraded by peptidases. As a result, peptide reporters must be made resistant to proteolysis in order to study enzymes in intact cells and lysates. This is typically achieved by optimizing the reporter sequence in a single cell type or model organism, but studies of reporter stability in a variety of organisms are needed to establish the robustness and broader utility of these molecular tools. We measured peptidase activity toward a peptide substrate reporter for protein kinase B (Akt) in E. coli, D. discoideum, and S. cerevisiae using capillary electrophoresis with laser-induced fluorescence (CE-LIF). Using compartment-based modeling, we determined individual rate constants for all potential peptidase reactions and explored how these rate constants differed between species. We found the reporter to be stable in D. discoideum (t _1/2 = 82-103 min) and S. cerevisiae (t _1/2 = 279-314 min), but less stable in E. coli (t _1/2 = 21-44 min). These data suggest that the reporter is sufficiently stable to be used for kinase assays in eukaryotic cell types while also demonstrating the potential utility of compartment-based models in peptide substrate reporter design. Graphical abstract Cell lysates from several evolutionarily divergent species were incubated with a peptide substrate reporter, and compartment-based modeling was used to determine key steps in the metabolism of the reporter in each cell type.

Development of a protease-resistant reporter to quantify BCR-ABL activity in intact cells

A peptidase-resistant ABL kinase substrate was developed by identifying protease-susceptible bonds on an ABL substrate peptide and replacing flanking amino acids with non-native amino acids. After an iterative design process, the lead, or designed, peptide X-A possesses a six-fold longer life in a cytosolic lysate than that of the starting peptide. The catalytic efficiency (kcat/KM) of purified ABL kinase for the lead peptide (125 s-1 μM-1) is similar to that of the starting peptide (103 s-1 μM-1) demonstrating preservation of the peptide's ability to serve as a kinase substrate. When incubated in cytosolic lysates, the lead peptide is slowly degraded into 4 fragments over time. In contrast, when loaded into intact cells, the peptide is metabolized into 5 fragments, with only 2 of the fragments corresponding to those in the lysate. Thus the two environments possess differing peptidase activities, which must be accounted for when designing peptidase-resistant peptides. In both settings, the substrate is phosphorylated by BCR-ABL providing a readout of BCR-ABL activity. A small panel of tyrosine kinase inhibitors verified the substrate's specificity for BCR-ABL/ABL kinase activity in both lysates and cells in spite of the multitude of other kinases present. The designed peptide X-A acts as a long-lived BCR-ABL kinase reporter in the leukemic cells possessing the BCR-ABL mutation.

Single Cell Chemical Cytometry of Akt Activity in Rheumatoid Arthritis and Normal Fibroblast-like Synoviocytes in Response to Tumor Necrosis Factor α

The etiology of rheumatoid arthritis (RA) is poorly understood, and 30% of patients are unresponsive to established treatments targeting tumor necrosis factor α (TNFα). Akt kinase is implicated in TNFα signaling and may act as a barometer of patient responses to biologic therapies. Fluorescent peptide sensors and chemical cytometry were employed to directly measure Akt activity as well as proteolytic activity in individual fibroblast-like synoviocytes (FLS) from RA and normal subjects. The specificity of the peptide reporter was evaluated and shown to be a valid measure of Akt activity in single cells. The effect of TNFα treatment on Akt activity was highly heterogeneous between normal and RA subjects, which was not observable in bulk analyses. In 2 RA subjects, a bimodal distribution of Akt activity was observed, primarily due to a subpopulation (21.7%: RA Subject 5; 23.8%: RA Subject 6) of cells in which >60% of the reporter was phosphorylated. These subjects also possessed statistically elevated proteolytic cleavage of the reporter relative to normal subjects, suggesting heterogeneity in Akt and protease activity that may play a role in the RA-affected joint. We expect that chemical cytometry studies pairing peptide reporters with capillary electrophoresis will provide valuable data regarding aberrant kinase activity from small samples of clinical interest.

Rational Design of a Dephosphorylation-Resistant Reporter Enables Single-Cell Measurement of Tyrosine Kinase Activity

Although peptide-based reporters of protein tyrosine kinase (PTK) activity have been used to study PTK enzymology in vitro, the application of these reporters to intracellular conditions is compromised by their dephosphorylation, preventing PTK activity measurements. Nonproteinogenic amino acids may be utilized to rationally design selective peptidic ligands by accessing greater chemical and structural diversity than is available using the native amino acids. We describe a peptidic reporter that, upon phosphorylation by the epidermal growth factor receptor (EGFR), is resistant to dephosphorylation both in vitro and in cellulo. The reporter contains a conformationally constrained phosphorylatable moiety (7-(S)-hydroxy-1,2,3,4-tetrahydroisoquinoline-3-carboxylic acid) in the place of L-tyrosine and is efficiently phosphorylated in A431 epidermoid carcinoma cells. Dephosphorylation of the reporter occurs 3 orders of magnitude more slowly compared with that of the conventional tyrosine-containing reporter.

Separation of peptide fragments of a protein kinase C substrate fused to a β-hairpin by capillary electrophoresis

Synthetic peptides incorporating well-folded β-hairpin peptides possess advantages in a variety of cell biology applications by virtue of increased resistance to proteolytic degradation. In this study, the WKpG β-hairpin peptide fused to a protein kinase C (PKC) substrate was synthesized, and capillary-electrophoretic separation conditions for this peptide and its proteolytic fragments were developed. Fragments of WKpG-PKC were generated by enzymatic treatment with trypsin and Pronase E to produce standards for identification of degradation fragments in a cellular lysate. A simple buffer system of 250 mM H3PO4, pH 1.5 enabled separation of WKpG-PKC and its fragments by capillary electrophoresis in less than 16 min. Using a cellular lysate produced from Ba/F3 cells, the β-hairpin-conjugated substrate and its PKCα-phosphorylated product could be detected and separated from peptidase-generated fragments produced in a cell lysate. The method has potential application for identification and quantification of WKpG-PKC and its fragments in complex biological systems when the peptide is used as a reporter to assay PKC activity.

Pronase E-Based Generation of Fluorescent Peptide Fragments: Tracking Intracellular Peptide Fate in Single Cells

The ability to track intracellular peptide proteolysis at the single cell level is of growing interest, particularly as short peptide sequences continue to play important roles as biosensors, therapeutics, and endogenous participants in antigen processing and intracellular signaling. We describe a rapid and inexpensive methodology to generate fluorescent peptide fragments from a parent sequence with diverse chemical properties, including aliphatic, nonpolar, basic, acidic, and non-native amino acids. Four peptide sequences with existing biochemical applications were fragmented using incubation with Pronase E and/or formic acid, and in each case a complete set of fluorescent fragments was generated for use as proteolysis standards in chemical cytometry. Fragment formation and identity was monitored with capillary electrophoresis with laser-induced fluorescence detection (CE-LIF) and matrix assisted laser desorption ionization-time-of-flight mass spectrometry (MALDI-MS) to confirm the presence of all sequences and yield fragmentation profiles across Pronase E concentrations which can readily be used by others. As a pilot study, Pronase E-generated standards from an Abl kinase sensor and an ovalbumin antigenic peptide were then employed to identify proteolysis products arising from the metabolism of these sequences in single cells. The Abl kinase sensor fragmented at 4.2 ± 4.8 zmol μM(-1) s(-1) and the majority of cells possessed similar fragment identities. In contrast, an ovalbumin epitope peptide was degraded at 8.9 ± 0.1 zmol μM(-1) s(-1), but with differential fragment formation between individual cells. Overall, Pronase E-generated peptide standards were a rapid and efficient method to identify proteolysis products from cells.

Response of single leukemic cells to peptidase inhibitor therapy across time and dose using a microfluidic device

Single-cell methodologies are revealing cellular heterogeneity in numerous biological processes and pathologies. For example, cancer cells are characterized by substantial heterogeneity in basal signaling and in response to perturbations, such as drug treatment. In this work, we examined the response of 678 individual U937 (human acute myeloid leukemia) cells to an aminopeptidase-inhibiting chemotherapeutic drug (Tosedostat) over the course of 95 days. Using a fluorescent reporter peptide and a microfluidic device, we quantified the rate of reporter degradation as a function of dose. While the single-cell measurements reflected ensemble results, they added a layer of detail by revealing unique degradation patterns and outliers within the larger population. Regression modeling of the data allowed us to quantitatively explore the relationships between reporter loading, incubation time, and drug dose on peptidase activity in individual cells. Incubation time was negatively correlated with the number of peptide fragment peaks observed, while peak area (which was proportional to reporter loading) was positively correlated with both the number of fragment peaks observed and the degradation rate. Notably, a statistically significant change in the number of peaks observed was identified as dose increased from 2 to 4 μM. Similarly, a significant difference in degradation rate as a function of reporter loading was observed for doses ≥2 μM compared to the 1 μM dose. These results suggest that additional enzymes may become inhibited at doses >1 μM and >2 μM, demonstrating the utility of single-cell data to yield novel biological hypotheses.

Single-cell sphingosine kinase activity measurements in primary leukemia

Sphingosine kinase (SK) is a promising therapeutic target in a number of cancers, including leukemia. Traditionally, SK has been measured in bulk cell lysates, but this technique obscures the cellular heterogeneity present in this pathway. For this reason, SK activity was measured in single cells loaded with a fluorescent sphingosine reporter. An automated capillary electrophoresis (CE) system enabled rapid separation and quantification of the phosphorylated and nonphosphorylated sphingosine reporter in single cells. SK activity was measured in tissue-cultured cells derived from chronic myelogenous leukemia (K562), primary peripheral blood mononuclear cells (PBMCs) from three patients with different forms of leukemia, and enriched leukemic blasts from a patient with acute myeloid leukemia (AML). Significant intercellular heterogeneity existed in terms of the degree of reporter phosphorylation (as much as an order of magnitude difference), the amount of reporter uptake, and the metabolites formed. In K562 cells, the average amount of reporter converted to the phosphorylated form was 39 ± 26% per cell. Of the primary PBMCs analyzed, the average amount of phosphorylated reporter was 16 ± 25%, 11 ± 26%, and 13 ± 23% in a chronic myelogenous leukemia (CML) patient, an AML patient, and a B-cell acute lymphocytic leukemia (B-ALL) patient, respectively. These experiments demonstrated the challenge of studying samples comprised of multiple cell types, with tumor blasts present at 5 to 87% of the cell population. When the leukemic blasts from a fourth patient with AML were enriched to 99% of the cell population, 19 ± 36% of the loaded sphingosine was phosphorylated. Thus, the diversity in SK activity remained even in a nearly pure tumor sample. These enriched AML blasts loaded significantly less reporter (0.12 ± 0.2 amol) relative to that loaded into the PBMCs in the other samples (≥1 amol). The variability in SK signaling may have important implications for SK inhibitors as therapeutics for leukemia and demonstrates the value of single-cell analysis in characterizing the nature of oncogenic signaling in cancer.

Measurement of protein kinase B activity in single primary human pancreatic cancer cells

An optimized peptide substrate was used to measure protein kinase B (PKB) activity in single cells. The peptide substrate was introduced into single cells, and capillary electrophoresis was used to separate and quantify nonphosphorylated and phosphorylated peptide. The system was validated in three model pancreatic cancer cell lines before being applied to primary cells from human pancreatic adenocarcinomas propagated in nude mice. As measured by phosphorylation of peptide substrate, each tumor cell line exhibited statistically different median levels of PKB activity (65%, 21%, and 4% phosphorylation in PANC-1 (human pancreatic carcinoma), CFPAC-1 (human metastatic ductal pancreatic adenocarcinoma), and HPAF-II cells (human pancreatic adenocarcinoma), respectively) with CFPAC-1 cells demonstrating two populations of cells or bimodal behavior in PKB activation levels. The primary cells exhibited highly variable PKB activity at the single cell level, with some cells displaying little to no activity and others possessing very high levels of activity. This system also enabled simultaneous characterization of peptidase action in single cells by measuring the amount of cleaved peptide substrate in each cell. The tumor cell lines displayed degradation rates statistically similar to one another (0.02, 0.06, and 0.1 zmol pg(-1) s(-1), for PANC-1, CFPAC-1, and HPAF-II cells, respectively) while the degradation rate in primary cells was 10-fold slower. The peptide cleavage sites also varied between tissue-cultured and primary cells, with 5- and 8-residue fragments formed in tumor cell lines and only the 8-residue fragment formed in primary cells. These results demonstrate the ability of chemical cytometry to identify important differences in enzymatic behavior between primary cells and tissue-cultured cell lines.

Measuring activity in the ubiquitin-proteasome system: from large scale discoveries to single cells analysis

The ubiquitin-proteasome system (UPS) is the primary pathway responsible for the recognition and degradation of misfolded, damaged, or tightly regulated proteins in addition to performing essential roles in DNA repair, cell cycle regulation, cell migration, and the immune response. While traditional biochemical techniques have proven useful in the identification of key proteins involved in this pathway, the implementation of novel reporters responsible for measuring enzymatic activity of the UPS has provided valuable insight into the effectiveness of therapeutics and role of the UPS in various human diseases such as multiple myeloma and Huntington's disease. These reporters, usually consisting of a recognition sequence fused to an analytical handle, are designed to specifically evaluate enzymatic activity of certain members of the UPS including the proteasome, E3 ubiquitin ligases, and deubiquitinating enzymes. This review highlights the more commonly used reporters employed in a variety of scenarios ranging from high-throughput screening of novel inhibitors to single cell microscopy techniques measuring E3 ligase or proteasome activity. Finally, a recent study is presented highlighting the development of a novel degron-based substrate designed to overcome the limitations of current reporting techniques in measuring E3 ligase and proteasome activity in patient samples.

A comparative analysis of the ubiquitination kinetics of multiple degrons to identify an ideal targeting sequence for a proteasome reporter

The ubiquitin proteasome system (UPS) is the primary pathway responsible for the recognition and degradation of misfolded, damaged, or tightly regulated proteins. The conjugation of a polyubiquitin chain, or polyubiquitination, to a target protein requires an increasingly diverse cascade of enzymes culminating with the E3 ubiquitin ligases. Protein recognition by an E3 ligase occurs through a specific sequence of amino acids, termed a degradation sequence or degron. Recently, degrons have been incorporated into novel reporters to monitor proteasome activity; however only a limited few degrons have successfully been incorporated into such reporters. The goal of this work was to evaluate the ubiquitination kinetics of a small library of portable degrons that could eventually be incorporated into novel single cell reporters to assess proteasome activity. After an intensive literary search, eight degrons were identified from proteins recognized by a variety of E3 ubiquitin ligases and incorporated into a four component degron-based substrate to comparatively calculate ubiquitination kinetics. The mechanism of placement of multiple ubiquitins on the different degron-based substrates was assessed by comparing the data to computational models incorporating first order reaction kinetics using either multi-monoubiquitination or polyubiquitination of the degron-based substrates. A subset of three degrons was further characterized to determine the importance of the location and proximity of the ubiquitination site lysine with respect to the degron. Ultimately, this work identified three candidate portable degrons that exhibit a higher rate of ubiquitination compared to peptidase-dependent degradation, a desired trait for a proteasomal targeting motif.

Microfluidic chemical cytometry of peptide degradation in single drug-treated acute myeloid leukemia cells

Microfluidic systems show great promise for single-cell analysis; however, as these technologies mature, their utility must be validated by studies of biologically relevant processes. An important biomedical application of these systems is characterization of tumor cell heterogeneity. In this work, we used a robust microfluidic platform to explore the heterogeneity of enzyme activity in single cells treated with a chemotherapeutic drug. Using chemical cytometry, we measured peptide degradation in the U937 acute myeloid leukemia (AML) cell line in the presence and absence of the aminopeptidase inhibitor Tosedostat (CHR-2797). The analysis of 99 untreated cells revealed rapid and consistent degradation of the peptide reporter within 20 min of loading. Results from drug-treated cells showed inhibited, but ongoing degradation of the reporter. Because the device operates at an average sustained throughput of 37 ± 7 cells/h, we were able to sample cells over the course of this time-dependent degradation. In data from 498 individual drug-treated cells, we found a linear dependence of degradation rate on amount of substrate loaded superimposed upon substantial heterogeneity in peptide processing in response to inhibitor treatment. Importantly, these data demonstrated the potential of microfluidic systems to sample biologically relevant analytes and time-dependent processes in large numbers of single cells.

A multiple reaction monitoring (MRM) method to detect Bcr-Abl kinase activity in CML using a peptide biosensor

The protein kinase Bcr-Abl plays a major role in the pathogenesis of chronic myelogenous leukemia (CML), and is the target of the breakthrough drug imatinib (Gleevec™). While most patients respond well to imatinib, approximately 30% never achieve remission or develop resistance within 1–5 years of starting imatinib treatment. Evidence from clinical studies suggests that achieving at least 50% inhibition of a patient’s Bcr-Abl kinase activity (relative to their level at diagnosis) is associated with improved patient outcomes, including reduced occurrence of resistance and longer maintenance of remission. Accordingly, sensitive assays for detecting Bcr-Abl kinase activity compatible with small amounts of patient material are desirable as potential companion diagnostics for imatinib. Here we report the detection of Bcr-Abl activity and inhibition by imatinib in the human CML cell line K562 using a cell-penetrating peptide biosensor and multiple reaction monitoring (MRM) on a triple quadrupole mass spectrometer. MRM enabled reproducible, selective detection of the peptide biosensor at fmol levels from aliquots of cell lysate equivalent to ∼15,000 cells. This degree of sensitivity will facilitate the miniaturization of the entire assay procedure down to cell numbers approaching 15,000, making it practical for translational applications in patient cells in which the limited amount of available patient material often presents a major challenge.