Novel Ethyl-Derivatization Approach for the Determination of Fluoride by Headspace Gas Chromatography/Mass Spectrometry

Near-Infrared Fluoride Sensing Nano-Optodes and Distance-Based Hydrogels Containing Aluminum-Phthalocyanine

Fluoride ions are highly relevant in environmental and biological sciences, and there is a very limited number of established fluoride chemical sensors. Previous fluoride-selective optodes were demonstrated with metal-porphyrin as the ionophore and required a chromoionophore for optical signal transduction. We demonstrate here novel optical fluoride sensing with nano-optodes containing an aluminum-phthalocyanine complex (AlClPc) as the single active sensing component, simplifying the conventional ion-selective optodes approach. The fluoride nano-optodes were interrogated in the absorbance and fluorescence modes in the near-infrared region, with absorption around 725 nm and emission peaks at 720 and 800 nm, respectively. The nano-optodes exhibited a lower detection limit around 0.1 μM and good selectivity over a range of common anions including ClO4-, Cl-, Br-, I-, SO42-, NO3-, and AcO-. Furthermore, the nano-optodes were physically entrapped in agarose hydrogels to allow distance-based point-of-care testing (POCT) applications. The 3D networks of the agarose hydrogel were able to filter off large particulates in the samples without stopping fluoride ions to reach the nano-optodes. The fluoride concentrations in real samples including river water, mineral water, and groundwater were successfully determined with the distance-based sensing hydrogel, and the results agreed well with those from commercial fluoride electrodes. Therefore, the results in this work lay the groundwork for the optical detection of fluoride in environmental samples without very sophisticated sample manipulation.

Potentiometric Determination of Free Fluoride Content in Wines from Dalmatia Region (Croatia)—A Comparative Study of Direct Potentiometry and Standard Addition Method

The aim of this study was to investigate 30 different types of Dalmatian wines as a potential source of fluoride. A fluoride ion selective electrode was used to measure the fluoride concentration in each sample. The direct potentiometric method and the standard addition method were evaluated, the latter being suggested as more accurate and precise. Measurements were performed in two buffers, acetate buffer and total ionic strength adjustment buffer (TISAB), to compare their influence on fluoride determination. The obtained results show that TISAB is a better choice than acetate buffer as a medium for fluoride determination. According to the proposed method, mass concentrations of fluoride of 0.19 and 0.18 mg/L were found in the studied red and white wines, with standard deviations of 0.04 and 0.03 mg/L, respectively. All determined fluorine levels in the tested wines were within the recommended limits and do not pose a risk to human health. No significant difference was found between the fluorine content in white and red wines, but there was a difference depending on the place of origin of the wine. The measured pH values for all the wines studied (except one sample) are very similar and show no significant correlation with the fluoride content.

Recently Developed Adsorbing Materials for Fluoride Removal from Water and Fluoride Analytical Determination Techniques: A Review

In recent years, there has been an increase in public perception of the detrimental side-effects of fluoride to human health due to its effects on teeth and bones. Today, there is a plethora of techniques available for the removal of fluoride from drinking water. Among them, adsorption is a very prospective method because of its handy operation, cost efficiency, and high selectivity. Along with efforts to assist fluoride removal from drinking waters, extensive attention has been also paid to the accurate measurement of fluoride in water. Currently, the analytical methods that are used for fluoride determination can be classified into chromatographic methods (e.g., ionic chromatography), electrochemical methods (e.g., voltammetry, potentiometry, and polarography), spectroscopic methods (e.g., molecular absorption spectrometry), microfluidic analysis (e.g., flow injection analysis and sequential injection analysis), titration, and sensors. In this review article, we discuss the available techniques and the ongoing effort for achieving enhanced fluoride removal by applying novel adsorbents such as carbon-based materials (i.e., activated carbon, graphene oxide, and carbon nanotubes) and nanostructured materials, combining metals and their oxides or hydroxides as well as natural materials. Emphasis has been given to the use of lanthanum (La) in the modification of materials, both activated carbon and hybrid materials (i.e., La/Mg/Si-AC, La/MA, LaFeO3 NPs), and in the use of MgO nanostructures, which are found to exhibit an adsorption capacity of up to 29,131 mg g−1. The existing analytical methodologies and the current trends in analytical chemistry for fluoride determination in drinking water are also discussed.

Selective and Fast Detection of Fluoride-Contaminated Water Based on a Novel Salen-Co-MOF Chemosensor

The development of selective and fast optical sensitive chemosensors for the detection and recognition of different cations and anions in a domain is still a challenge in biological, industrial, and environmental fields. Herein, we report a novel approach for the detection and determination of fluoride ion (F-) sensing based on a salen-cobalt metal-organic framework (Co(II)-MOF). By a simple method, the Co(II)-MOF was synthesized and characterized using several tools to elucidate the structure and morphology. The photoluminescence (PL) spectrum of the Co(II)-MOF (100.0 nM/L) was examined versus different ionic species like F-, Br-, Cl-, I-, SO4 2-, and NO3 - and some cationic species like Mg2+, Ca2+, Na+, and K+. In the case of F- ions, the PL intensity of the Co(II)-MOF was scientifically enhanced with a remarkable red shift. With the increase of F- concentration, the Co(II)-MOF PL emission spectrum was also professionally enhanced. The limit of detection (LOD) for the Co(II)-MOF chemosensor was 0.24 μg/L, while the limit of quantification (LOQ) was 0.72 μg/L. Moreover, a comparison of the Co(II)-MOF optical approach with other published reports was studied, and the mechanism of interaction was also investigated. Additionally, the applicability of the current Co(II)-MOF approach in different real water samples, such as tap water, drinking water, Nile River water, and wastewater, was extended. This easy-to-use future sensor provides reliable detection of F- in everyday applications for nonexpert users, especially in remote rural areas.

Application of microextraction techniques for indirect spectrophotometric determination of fluorides in river waters

The present study is dedicated to development of improved method for determination of trace amounts of fluorides in natural waters which is based on the interaction of fluorides with ion associate (IA) of Al(III), salicylic aldehyde acylhydrazones (benzhydrazone (SABH) and 4-picolinhydrazone (SAPH)) and polymethine dye Astra Phloxine FF (AP). Comparison of analytical forms [Al(SABH)₂]⋅AP and [Al(SAPH)₂]⋅AP showed that the analytical system Al(III)-SAPH-AP is more effective, namely, a higher level of preconcentration of the analytical form is ensured by and extraction equilibrium is achieved faster. Based on the study, we propose a new, fast, simple, reliable, sensitive, and accurate method of the indirect UV-Vis-spectrophotometric determination of fluorides grounded on the interaction of fluorides with IA of Al(III), SAPH and AP with the utilization of vortex-assisted liquid-liquid microextraction (VALLME). The method is based on the discoloration of the microextract of IA of Al(III), SAPH and AP (Al-SAPH-AP) in presence of fluoride ions due to the formation of fluoride complexes of aluminum with higher stability. The effect of various factors has been studied. The optimal conditions of the UV-Vis-spectrophotometric determination of fluorides were defined as: pH 7.0-10.0, 1.0⋅10^-6 mol⋅L^-1 Al(III); 4.0⋅10^-5 mol⋅L^-1 SAPH; 1.0⋅10^-6 mol⋅L^-1 AP; λ = 560 nm. VALLME have been carried out in 250 μL of CCl₄ at 20:1 vol ratios of aqueous and organic phases, with vortexing at 3000 rpm for 15 s followed by centrifugation at 2000 rpm for 2 min. The determination of fluorides is feasible in the presence of various interferences. The calibration curve shows the linear dependence in the range of 0.3-114 μg⋅L^-1 of the fluorides concentration (R² = 0.993) with the limit of detection of 0.086 μg⋅L^-1 and the limit of determination of 0.284 μg⋅L^-1. The accuracy of the proposed protocol of fluorides determination was verified towards a reference method on the samples of natural rivers waters (RSD 2.6-3.1%, recovery 98.3-101.4%).

Versatile derivatization for GC-MS and LC-MS: alkylation with trialkyloxonium tetrafluoroborates for inorganic anions, chemical warfare agent degradation products, organic acids, and proteomic analysis

Analytical chemists resort to derivatization for improving the detection performance of certain categories of analytes. Within this context, alkylation reactions are regarded as an important asset for many methods based on GC-MS and LC-MS. Trialkyloxonium tetrafluoroborates (R[Formula: see text][BF₄]^-) are powerful alkylating agents with ionic liquid properties: they are nonvolatile salts soluble in water which are easier and safer to handle with respect to common alkylating agents like diazomethane. R[Formula: see text][BF₄]^- can perform the alkylation in both organic and aqueous media at pH conditions ranging from acidic to alkaline. Recent analytical applications of trialkyloxonium derivatizations include the high-precision determination of inorganic anions in complex matrices, the qualitative confirmation of chemical warfare agent degradation products in soils, the profiling of carboxylic acids in urine, and the detection of protein post-translational modifications induced by carbon dioxide. The common denominator for all methods presented can be found in the simplicity of the alkylation protocol which, in most of the cases, requires a single step addition of the reagent directly to the sample. Graphical Abstract Alkylation with trialkyloxonium salts for GC-MS and LC-MS analysis.

Determination of fluorine in herbs and water samples by molecular absorption spectrometry after preconcentration on nano-TiO2 using ultrasound-assisted dispersive micro solid phase extraction

This work presents ultrasound-assisted dispersive micro solid phase extraction (USA DMSPE) for preconcentration of fluorine (F) in water and herb samples. TiO₂ nanoparticles (NPs) were used as an adsorbent. The determination with slurry sampling was performed via molecular absorption of calcium monofluoride (CaF) at 606.440 nm using a high-resolution continuum source electrothermal absorption spectrometry (HR-CS ET MAS). Several factors influencing the efficiency of the preconcentration technique, such as the amount of TiO₂, pH of sample solution, ultrasonication and centrifugation time and TiO₂ slurry solution preparation before injection to HR-CS ET MAS, were investigated in detail. The conditions of detection step (wavelength, calcium amount, pyrolysis and molecule-forming temperatures) were also studied. After extraction, adsorbent with the analyte was mixed with 200 μL of H₂O to prepare a slurry solution. The concentration limit of detection was 0.13 ng mL⁻¹. The achieved preconcentration factor was 7. The relative standard deviations (RSDs, %) for F in real samples were 3–15%. The accuracy of this method was evaluated by analyses of certified reference materials after spiking: INCT-MPH-2 (Mixed Polish Herbs), INCT-SBF-4 (Soya Bean Flour), ERM-CAO11b (Hard Drinking Water) and TMDA-54.5 (Lake Ontario Water). The measured F contents in reference materials were in satisfactory agreement with the added amounts, and the recoveries were found to be 97–109%. Under the developed extraction conditions, the proposed method has been successfully applied for the determination of F in real water samples (lake, sea, tap water) and herbs.

Solvent-saturated solid matrix technique for increasing the efficiency of headspace extraction of volatiles

Due to the slow mass transfer rate of substance in solid media, very limited amount of volatiles can be released from the solid matrix to the headspace in the static headspace analysis. Thus, low sensitivity is often the main problem of static headspace analysis of the volatiles contained in a solid sample. Here, we reported on a solvent-saturated solid matrix (SSSM) technique which successfully enhanced the headspace extraction efficiency, and improved the sensitivity of the headspace analysis of the volatiles in solid sample. By adding a small amount of high-boiling-point solvent (e.g. glycerin) onto the solid sample to form a surface-covered solvent layer, the headspace extraction efficiency can be significantly increased by up to 2.5 times higher than that of the conventional one. Based on the experimental investigation of the performance of different amounts of solvent used for the headspace extraction of volatiles in air-dried lotus flower samples, the possible mechanism for the SSSM assisted headspace extraction has been proposed and validated, which showed that a saturation point of solvent existed for a given amount of solid sample, and the maximum extraction efficiency could be obtained at this saturation point. Moreover, positive results were also achieved when applying this new technique in the headspace extraction of the volatiles to the other two solid samples, which means this newly developed technique may open up a new avenue, and also serve as a general strategy for improving the sensitivity of headspace analysis of the volatiles entrapped in solid matrices.

Optical sensor for fluoride determination in tea sample based on evanescent-wave interaction and fiber-optic integration

In this work, a miniaturized optical sensor was developed for fluoride determination in tea samples to evaluate their specific risks of fluorosis for public health based on evanescent-wave interaction. The sensor design was integrated on the optical fiber by utilizing the evanescent wave produced on the fiber surface to react with sensing reagents. According to the absorption change at 575nm, fluoride could be determined by colorimetric method and evaluated by Beer's law. With improved performances of small detection volume (1.2μL), fast analysis (0.41min), wide linear range (0.01-1.4mgL^-1), low detection limit (3.5μgL^-1, 3σ) and excellent repeatability (2.34%), the sensor has been applied to fluoride determination in six different tea samples. Conventional spectrophotometry and ion chromatography were employed to validate the sensor's accuracy and potential application. Furthermore, this sensor fabrication provided a miniaturized colorimetric detection platform for other hazardous species monitoring based on evanescent wave interaction.

Recent Developments in Methods of Analysis for Fluoride Determination

This review covers current analytical techniques, instruments, and methodologies used in the analysis of fluoride in various matrices. Our comprehensive literature search showed that there is no recently published review article about analytical methodologies for fluoride. In this review, we explore chromatographic, spectroscopic, and electrochemical innovations appearing in the recent literature.

Innovative Monitoring of Atmospheric Gaseous Hydrogen Fluoride

Hydrogen fluoride (HF) is a basic raw material for a wide variety of industrial products, with a worldwide production capacity of more than three million metric tonnes. A novel method for determining particulate fluoride and gaseous hydrogen fluoride in air is presented herewith. Air was sampled using miniaturised 13 mm Swinnex two-stage filter holders in a medium-flow pumping system and through the absorption of particulate fluoride and HF vapours on cellulose ester filters uncoated or impregnated with sodium carbonate. Furthermore, filter desorption from the holders and the extraction of the pentafluorobenzyl ester derivative based on solid-phase microextraction were performed using an innovative robotic system installed on an xyz autosampler on-line with gas chromatography (GC)/mass spectrometry (MS). After generating atmospheres of a known concentration of gaseous HF, we evaluated the agreement between the results of our sampling method and those of the conventional preassembled 37 mm cassette (±8.10%; correlation coefficient: 0.90). In addition, precision (relative standard deviation for n = 10, 4.3%), sensitivity (0.2 μg/filter), and linearity (2.0-4000 μg/filter; correlation coefficient: 0.9913) were also evaluated. This procedure combines the efficiency of GC/MS systems with the high throughput (96 samples/day) and the quantitative accuracy of pentafluorobenzyl bromide on-sample derivatisation.

Fabrication of a miniaturized capillary waveguide integrated fiber-optic sensor for fluoride determination

Fluoride concentration is a key aspect of water quality and essential for human health.

Analytical methods for the determination of halogens in bioanalytical sciences: a review

Fluorine, chlorine, bromine, and iodine have been studied in biological samples and other related matrices owing to the need to understand the biochemical effects in living organisms. In this review, the works published in last 20 years are covered, and the main topics related to sample preparation methods and analytical techniques commonly used for fluorine, chlorine, bromine, and iodine determination in biological samples, food, drugs, and plants used as food or with medical applications are discussed. The commonest sample preparation methods, as extraction and decomposition using combustion and pyrohydrolysis, are reviewed, as well as spectrometric and electroanalytical techniques, spectrophotometry, total reflection X-ray fluorescence, neutron activation analysis, and separation systems using chromatography and electrophoresis. On this aspect, the main analytical challenges and drawbacks are highlighted. A discussion related to the availability of certified reference materials for evaluation of accuracy is also included, as well as a discussion of the official methods used as references for the determination of halogens in the samples covered in this review.