Counting Bacteria Using Functionalized Gold Nanoparticles as the Light-Scattering Reporter

Optical Methods for Label-Free Detection of Bacteria

Pathogenic bacteria are the leading causes of food-borne and water-borne infections, and one of the most serious public threats. Traditional bacterial detection techniques, including plate culture, polymerase chain reaction, and enzyme-linked immunosorbent assay are time-consuming, while hindering precise therapy initiation. Thus, rapid detection of bacteria is of vital clinical importance in reducing the misuse of antibiotics. Among the most recently developed methods, the label-free optical approach is one of the most promising methods that is able to address this challenge due to its rapidity, simplicity, and relatively low-cost. This paper reviews optical methods such as surface-enhanced Raman scattering spectroscopy, surface plasmon resonance, and dark-field microscopic imaging techniques for the rapid detection of pathogenic bacteria in a label-free manner. The advantages and disadvantages of these label-free technologies for bacterial detection are summarized in order to promote their application for rapid bacterial detection in source-limited environments and for drug resistance assessments.

Nucleic Acids Detection for Mycobacterium tuberculosis Based on Gold Nanoparticles Counting and Rolling-Circle Amplification

Tuberculosis (TB) is a common infectious disease caused by Mycobacterium tuberculosis, which usually disturbs the lungs, and remains the second leading cause of death from an infectious disease worldwide after the human immunodeficiency virus. Herein, we constructed a simple and sensitive method for Mycobacterium tuberculosis-specific DNA detection with the dark-field microscopic imaging of gold nanoparticles (AuNPs) counting strategy and rolling-circle amplification (RCA). Taking advantage of RCA amplification, one target molecule produced hundreds of general oligonucleotides, which could form the sandwich structure with capture-strand-modified magnetic beads and AuNPs. After magnetic separation, AuNPs were released and detected by dark-field imaging; about 10 fM Mycobacterium tuberculosis-specific DNA target can still be differentiated from the blank. No significant change of the absorbance signals was observed when the target DNA to genomic DNA ratio (in mass) was from 1:0 to 1:10⁶. The spike recovery results in genomic DNA from human and Klebsiella pneumoniae suggested that the proposed method has the feasibility for application with biological samples. This proposed method is performed on an entry-level dark-field microscope setup with only a 6 μL detection volume, which creates a new, simple, sensitive, and valuable tool for pathogen detection.

Continuous live cell imaging using dark field microscopy

The optical observation of live cell behavior is critical for biological and biomedical studies. The development of techniques for long-term cell and tissue imaging is, however, hindered by phototoxicity induced by excited fluorophores. We, herein, propose a methodology to capture live cell behavior using dark field microscopy (DM). Since the light intensity of DM is merely ∼0.1% of bright-field microscopy (BM) and ∼0.5% of fluorescence microscopy (FM), it allows super long and frequent live cell imaging. Our results demonstrate that continuous exposure to DM light for 48 h brings about no observable effect on the growth rate of 3T3 fibroblasts and HepG2 hepatoma cells, indicating minimum photo-toxicity. Moreover, DM images show contrast comparable to FM, which does not depend on the probes and staining efficiency. We, therefore, conclude that the proposed approach is suitable for long-term live cell imaging with super-high temporal resolution.

Rearrangement of protein structures on a gold nanoparticle surface is regulated by ligand adsorption modes

With development of the nanomedicine field and increasing hazards of exposure to nanobiological materials, research on the protein corona is urgently required. In particular, the understanding of the mechanism of structural changes of protein on a nanosurface should be improved. Herein, we focus on exploring the role of ligand adsorption modes (physiosorbed citrates or chemisorbed GSH) in the regulation of conformational rearrangement of three blood proteins (serum albumin, globulin, and fibrinogen) on the surface of gold nanoparticles. Through experimental measurements, protein adsorption features (thermodynamics, kinetics, adsorption orientation, and structural changes) were estimated. Molecular dynamics simulations further indicated that physiosorbed citrates could be gradually peeled off by approaching proteins and that the bare Au surface provided a stronger interface interaction than the chemisorbed GSH layer. Protein structure rearrangements were due to the reduction in protein internal energy, with an increase in H-bond formation involving a decrease in the α-helical content and an increase in the β-sheet content, to offset the high interfacial energy. Rearrangement of protein structures could occur either intramolecularly or intermolecularly. These findings enhanced our understanding of nano-protein interaction in the biological milieu and facilitate biomedical exploration of engineered nanomaterials.

Single nanoparticle identification coupled with auto-identify algorithm for rapid and accurate detection of L-histidine

In this work, an auto-identify sensor was constructed for rapid and high-precision detection of L-histidine. The proposed strategy is based on the auto-identify algorithm and the aggregation of alkynyl and azide functionalized gold nanoparticles induced by the Cu⁺ catalyzed azides and alkynes cycloaddition (CuAAC) reaction. Specially, the color of scattering light spots for the aggregated gold nanoparticle (AuNPs) caused by CuAAC reaction was quite different from that of the monomers. However, L-histidine can bind to Cu²⁺ and inhibits the production of Cu⁺, hence preventing the aggregation of AuNPs. Therefore, there is a distinct change of color as the addition of L-histidine under dark-field microscopy. Then, L-histidine can be quantitatively detected by combining the color change with the Meanshift algorithm accurately and automatically. Such proposed method has been successfully applied for the detection of L-histidine in serum sample with satisfying result.

New Detection Platform for Screening Bacteria in Liquid Samples

The development of sensitive methods for the determination of potential bacterial contamination is of upmost importance for environmental monitoring and food safety. In this study, we present a new method combining a fast pre-enrichment step using a microporous cryogel and a detection and identification step using antimicrobial peptides (AMPs) and labelled antibodies, respectively. The experimental method consists of: (i) the capture of large amounts of bacteria from liquid samples by using a highly porous and functionalized cryogel; (ii) the detection and categorisation of Gram-positive and Gram-negative bacteria by determining their affinities toward a small set of AMPs; and (iii) the identification of the bacterial strain by using labelled detection antibodies. As proof of concept, the assessment of the three steps of the analysis was performed by using Escherichia coli and Bacillus sp. as models for Gram-negative and Gram-positive bacteria, respectively. The use of AMPs with broad specificity combined with labelled antibodies enabled the detection and potential categorization of a large spectrum of unknown or unexpected bacteria.

A Dual Immunological Raman-Enabled Crosschecking Test (DIRECT) for Detection of Bacteria in Low Moisture Food

Among the physical, chemical and biological hazards that could arise with respect to food safety, bacterial contamination has been one of the main concerns in recent years. Bacterial contamination in low moisture foods (LMFs) was an emerging threat which used to draw less attention as LMFs were considered at low risk of such a hazard. Bacteria can survive in low moisture environments and cause foodborne diseases once they enter the digestive system. Common detection methods such as ELISA and PCR are not well suited to LMFs, as most of them operate under aqueous environments. In this study, a Dual Immunological Raman-Enabled Crosschecking Test (DIRECT) was developed for LMFs using a nano-scaled surface enhanced Raman scattering (SERS) biosensor platform and multivariate discriminant analysis with a portable Raman spectrometer. It could provide a limit of detection (LOD) of 102 CFU/g of bacteria in model LMFs, with a detection time of 30-45 min. It has the potential to become a quick screening method for on-site bacteria detection for LMFs to identify food safety risks in real time.

Activated Plasmonic Nanoaggregates for Dark-Field in Situ Imaging for HER2 Protein Imaging on Cell Surfaces

Dark-field microscopy (DFM) based on localized surface plasmon resonance (LSPR) was used for observation of experimental phenomena, which is a hopeful nondamaging and non-photobleaching biological imaging technique. In this strategy, plasma nanoaggregates with stronger scattering efficiency were formed in the presence of the target, causing a "turn-on" phenomenon, when asymmetry modified AuNPs were introduced as probes with zero LSPR background. First, Au₁-N₃ probe and Au₂-C≡C probe were designed for the cycloaddition between azide and alkyne to form AuNP dimers under catalytic action by Cu⁺, which was obtained from the reduction of Cu²⁺ by sodium ascorbate. The two kinds of probes were successfully used for the detection of Cu²⁺ in rat serum. Then, to apply this concept to protein on cells, DNA and antibody were modified on the probes. DNA1/Au₁-N₃ probe and anti-HER2/Au₂-C≡C probe were proposed for HER2 protein DFM on cells. By designing an aptamer sequence in primer, the rolling circle amplification (RCA) was introduced in HER2 DFM on cells, and the image signal was much brighter than that from no-RCA. The unique design made it easier to discriminate the target signal from background noise in cell DFM. This method might be used in the fields of molecular diagnostics and cell imaging.

Dark Field Microscopy-Based Biosensors for the Detection of E. coli in Environmental Water Samples

Development of sensitive methods for the determination of E. coli bacteria contamination in water distribution systems is of paramount importance to ensure the microbial safety of drinking water. This work presents a new sensing platform enabling the fast detection of bacteria in field samples by using specific antibodies as the biorecognition element and dark field microscopy as the detection technique. The development of the sensing platform was performed using non-pathogenic bacteria, with the E. coli DH5α strain as the target, and Bacillus sp. 9727 as the negative control. The identification of the captured bacteria was made by analyzing the dark field microscopy images and screening the detected objects by using object circularity and size parameters. Specificity tests revealed the low unspecific attachment of either E. coli over human serum albumin antibodies (negative control for antibody specificity) and of Bacillus sp. over E. coli antibodies. The system performance was tested using field samples, collected from a wastewater treatment plant, and compared with two quantification techniques (i.e., Colilert-18 test and quantitative polymerase chain reaction (qPCR)). The results showed comparable quantification capability. Nevertheless, the present method has the advantage of being faster, is easily adaptable to in-field analysis, and can potentially be extended to the detection of other bacterial strains.

A sensitive electrochemical strategy via multiple amplification reactions for the detection of E. coli O157: H7

The sensitive and efficient strategy remains a central challenge for early diagnosis of pathogenic bacteria. Herein, an ultrasensitive electrochemical biosensor was proposed based on the multiple amplification strategy via the 3D DNA walker, rolling circle amplification (RCA) and hybridization chain reaction (HCR) for the accurate detection of Escherichiacoli O157:H7 (E. coli O157:H7). Firstly, the target sequence extracted from E. coli O157:H7 was transformed and amplified by the DNA walker firstly. Subsequently, a large number of transformed nucleic acid sequences were amplified by the RCA reaction. And then, the progress of HCR was triggered by every fragment in RCA products to form a long double-stranded DNA sequence to immobilize electrochemical indicators, generating a significantly enhanced electrochemical signal. As expected, a high sensitivity with a detection limit of 7 CFU/mL was achieved based on the proposed multiple amplification strategy, which is superior to most current methods for E. coli O157: H7 assay. The multiple amplification strategy could be readily expanded for the detection of various pathogenic bacteria, providing a new approach for early diagnosis of pathogenic microorganisms or other diseases.

Dark-Field Microscopic Detection of Bacteria using Bacteriophage-Immobilized SiO2@AuNP Core-Shell Nanoparticles

To replace molecular biological and immunological methods, biosensors have recently been developed for the rapid and sensitive detection of bacteria. Among a wide variety of biological materials, bacteriophages have received increasing attention as promising alternatives to antibodies in biosensor applications. Thus, we herein present a rapid and highly selective detection method for pathogenic bacteria, which combines dark-field light scattering imaging with a plasmonic biosensor system. The plasmonic biosensor system employs bacteriophages as the biorecognition element and the aggregation-induced light scattering signal of gold nanoparticle-assembled silica nanospheres as a signal transducer. Using Staphylococcus aureus strain SA27 as a model analyte, we demonstrated that the plasmonic biosensor system detects S. aureus in the presence of excess Escherichia coli in a highly selective manner. After the sample and the S. aureus phage S13'-conjugated plasmon scattering probe were mixed, S. aureus detection was completed within 15-20 min with a detection limit of 8 × 10⁴ colony forming units per milliliter.

Colorimetric ultrasensitive detection of DNA based on the intensity of gold nanoparticles with dark-field microscopy

We present an ultrasensitive colorimetric nucleic acid assay based on the intensity of gold nanoparticles (Au NPs) using dark field microscopy. In the absence of target DNA, two hairpin-like DNA strands with protruding single-stranded DNA (ssDNA) can be absorbed onto the Au NP surface via non-covalent interactions between the exposed nitrogen bases of ssDNA and Au NPs, which inhibits Au NPs from aggregating in a high concentration of salt media, while in the presence of target DNA, two hairpin DNA strands hybridize with target DNA to form double-stranded DNA (dsDNA). After hybridization chain reaction (HCR) amplification, rigid dsDNA polymers are formed, which results in serious Au NP aggregation in the salt environment. By measuring the intensity change of yellow and red dots on a dark-field image, the concentration of target DNA can be accurately quantified with a limit of detection (LOD) of 66 fM.

Particle Diffusometry: An Optical Detection Method for Vibrio cholerae Presence in Environmental Water Samples

There is a need for a rapid, robust, and sensitive biosensor to identify low concentrations of pathogens in their native sample matrix without enrichment or purification. Nucleic acid-based detection methods are widely accepted as the gold standard in diagnostics, but robust detection of low concentrations of pathogens remains challenging. Amplified nucleic acids produce more viscous solutions, which can be measured by combining these products with fluorescent particles and measuring the change in the particle diffusion coefficient using a technique known as particle diffusometry. Here, we utilize Vibrio cholerae (V. cholerae) as a proof-of-concept for our detection system due to its inherently low concentration in environmental water samples. We demonstrate that particle diffusometry can be used to detect down to 1 V. cholerae cell in molecular-grade water in 20 minutes and 10 V. cholerae cells in pond water in just 35 minutes in 25 µL reaction volumes. The detection limit in pond water is environmentally relevant and does not require any enrichment or sample preparation steps. Particle diffusometry is 10-fold more sensitive than current gold standard fluorescence detection of nucleic acid amplification. Therefore, this novel measurement technique is a promising approach to detect low levels of pathogens in their native environments.

Raman-encoded, multivalent glycan-nanoconjugates for traceable specific binding and killing of bacteria

Glycan recognition plays key roles in cell-cell and host-pathogen interactions, stimulating widespread interest in developing multivalent glycoconjugates with superior binding affinity for biological and medical uses. Here, we explore the use of Raman-encoded silver coated gold nanorods (GNRs) as scaffolds to form multivalent glycoconjugates. The plasmonic scaffolds afford high-loading of glycan density and their optical properties offer the possibilities of monitoring and quantitative analysis of glycan recognition. Using E. coli strains with tailored on/off of the FimH receptors, we have demonstrated that Raman-encoded GNRs not only allow for real-time imaging and spectroscopic detection of specific binding of the glycan-GNR conjugates with bacteria of interest, but also cause rapid eradication of the bacteria due to the efficient photothermal conversion of GNRs in the near-infrared spectral window. We envision that optically active plasmonic glycoconjugates hold great potential for screening multivalent glycan ligands for therapeutic and diagnostic applications.

A galvanic exchange process visualized on single silver nanoparticles via dark-field microscopy imaging

The study of the galvanic exchange (GE) mechanism is beneficial for designing and developing new bimetallic nanocrystal structures with excellent bifunctional catalytic properties. Herein, we have visually demonstrated a GE process by real-time monitoring of the reaction between silver nanoparticles (AgNPs) and Au3+ at the single nanoparticle level using light scattering dark-field microscopy imaging. The localized surface plasmon resonance (LSPR) scattering spectral shifts of the AgNPs which reveal the Ag removal rate and Au deposition rate on the surface of the AgNPs can be observed. Furthermore, a pixel meta three color channel method has been introduced for analyzing the scattering light color changes of plasmonic particles to reveal the kinetics of the atomic deposition process on a single AgNP during GE, thus making the reaction kinetics of the GE process directly observable. Therefore, this study provides an efficient and promising approach for understanding the GE mechanism and exploiting its reaction kinetics.

The aptamer-thrombin-aptamer sandwich complex-bridged gold nanoparticle oligomers for high-precision profiling of thrombin by dark field microscopy

We present a simple and efficient colorimetric assay strategy for ultrasensitive visual detection of human α-thrombin, which is essentially based on the formation of the DNA1-thrombin-DNA2 sandwich complex-bridged gold nanoparticle (Au NP) oligomers. Unlike the traditional colorimetric sensing strategies which induced the nanoparticle aggregates with uncontrolled aggregate size. In this work, the DNA1with rich G bases was firstly conjugated on the surfaces of Au NPs fixed on the hexadecyl trimethylammonium bromide (CTAB)-coated glass slide, and thrombin was captured by the DNA1. Then, the other DNA2 with rich G bases interacted with the former DNA1-thrombin complex and formed a DNA1-thrombin-DNA2 sandwich complex. The subsequently added Au NPs can be bound to the Au NP-DNA1-thrombin-DNA2 via Au-S bond to trigger the formation of Au NP oligomers, an apparent color change of the single Au NPs from green to yellow and red was observed under dark field microscopy. By measuring the intensity change of the yellow and red Au NPs, the concentration of target thrombin could be accurately quantified. As a proof of concept experiment, the formation of Au NP oligomers resulted in significantly improved sensitivity (10 fM of limit of detection and 20 fM of limit of quantity) and wider linear dynamic range of thrombin detection (20 fM-20 nM), the relative standard deviation (RSD) was less than 5.73% (n = 5). In addition, in order to validate the potential application in clinical diagnosis, the content of thrombin in a human serum samples was also quantified.

Whole-Cell Pseudomonas aeruginosa Localized Surface Plasmon Resonance Aptasensor

The detection of whole-cell Pseudomonas aeruginosa presents an intriguing challenge with direct applications in health care and the prevention of nosocomial infection. To address this problem, a localized surface plasmon resonance (LSPR) based sensing platform was developed to detect whole-cell Pseudomonas aeruginosa strain PAO1 using a surface-confined aptamer as an affinity reagent. Nanosphere lithography (NSL) was used to fabricate a sensor surface containing a hexagonal array of Au nanotriangles. The sensor surface was subsequently modified with biotinylated polyethylene glycol (Bt-PEG) thiol/PEG thiol (1:3), neutravidin, and biotinylated aptamer in a sandwich format. The 1:3 (v/v) ratio of Bt-PEG thiol/PEG thiol was specifically chosen to maximize PAO1 binding while minimizing nonspecific adsorption and steric hindrance. In contrast to prior whole-cell LSPR work, the LSPR wavelength shift was shown to be linearly related to bacterial concentration over the range of 10-103 cfu mL-1. This LSPR sensing platform is rapid (∼3 h for detection), sensitive (down to the level of a single bacterium), selective for detection of Pseudomonas strain PAO1 over other strains, and exhibits a clinically relevant dynamic range and excellent shelf life (≥2 months) when stored at ambient conditions. This versatile LSPR sensing platform should be extendable to a wide range of supermolecular analytes, including both bacteria and viruses, by switching affinity reagents, and it has potential to be used in point-of-care and field-based applications.

Current Technical Approaches for the Early Detection of Foodborne Pathogens: Challenges and Opportunities

The development of novel and high-tech solutions for rapid, accurate, and non-laborious microbial detection methods is imperative to improve the global food supply. Such solutions have begun to address the need for microbial detection that is faster and more sensitive than existing methodologies (e.g., classic culture enrichment methods). Multiple reviews report the technical functions and structures of conventional microbial detection tools. These tools, used to detect pathogens in food and food homogenates, were designed via qualitative analysis methods. The inherent disadvantage of these analytical methods is the necessity for specimen preparation, which is a time-consuming process. While some literature describes the challenges and opportunities to overcome the technical issues related to food industry legal guidelines, there is a lack of reviews of the current trials to overcome technological limitations related to sample preparation and microbial detection via nano and micro technologies. In this review, we primarily explore current analytical technologies, including metallic and magnetic nanomaterials, optics, electrochemistry, and spectroscopy. These techniques rely on the early detection of pathogens via enhanced analytical sensitivity and specificity. In order to introduce the potential combination and comparative analysis of various advanced methods, we also reference a novel sample preparation protocol that uses microbial concentration and recovery technologies. This technology has the potential to expedite the pre-enrichment step that precedes the detection process.

Color resolution improvement of the dark-field microscopy imaging of single light scattering plasmonic nanoprobes for microRNA visual detection

Imaging of light scattering plasmonic nanoparticles (PNPs) with the aid of the dark-field microscopy imaging (iDFM) technique has attracted wide attention owing to its high signal-to-noise ratio, but to improve the color resolution and contrast of dark-field microscopy (DFM) images of single light scattering PNPs in a small spectral variation environment is still a challenge. In this study, a new color analytical method for resolving the resolution and contrast in DFM images has been developed and further applied for colorimetric analysis using the digital image processing technique. The color of single light scattering PNP images is automatically coded at first with the hue values of the HSI color model, and then amplified using the MATLAB program even for marginal spectral changes, leading to significant improvement of the color resolution of DFM images and easy detection with the naked eye. As a proof of concept, this method is then applied to distinguish single PNPs with various sizes and to visually detect hepatocellular carcinoma-associated microRNA. As it greatly improved the color resolution of iDFM and its detection sensitivity, this method shows promise to serve as a better alternative for sensitive visual analysis and spectrometer-based spectral analysis.

Real-time dark-field light scattering imaging to monitor the coupling reaction with gold nanorods as an optical probe

Gold nanorods (GNRs) have opened up promising applications based on their reshaping, due to the fact that a tiny change in shape or size could directly lead to optical changes. Herein, we report chemical reshaping of GNRs induced by the coupling reaction between Au, ferric chloride and thiourea. In the coupling reaction, Fe³⁺ oxidizes the GNRs to yield Au(i), which complexes with the thiourea ligand, lowering the Gibbs free energy of the gold species and promoting the reaction equilibrium to enable the chemical reshaping of the GNRs. This coupling reaction process was monitored using a light-scattering dark-field microscopy (DFM) imaging technique and scanning electron microscopy (SEM). The light scattering underwent a colour change from bright red to yellow and finally to green, and the GNRs underwent a morphological change from rod-shaped to fusiform and finally to spherical, which is somewhat different from the results of other chemical etching processes of GNRs. It is believed that the coupling reaction induced chemical reshaping of GNRs not only provides an alternative way to monitor the coupling reaction, but also offers a facile way to obtain a desirable GNR morphology, which is important for the preparation of fusiform nanostructures.

Analytical methods based on the light-scattering of plasmonic nanoparticles at the single particle level with dark-field microscopy imaging

This minireview summarizes analytical methods based on the light-scattering of gold nanoparticles with the dark-field microscopy imaging technique at the single particle level.

Plasmon-induced light concentration enhanced imaging visibility as observed by a composite-field microscopy imaging system

The plasmon-induced light concentration (PILC) effect, which has been supposed to be responsible for lots of linear and nonlinear enhanced optical signals such as Raman and high-harmonic generation, is hard to directly observe. Herein, we developed a scattered light based composite-field microscopy imaging (iCFM) system by coupling the oblique and vertical illumination modes, which were adopted in dark- and bright-field microscopy imaging systems, respectively, and through which iCFM system monochromatic background (MCB) images are available, to directly observe the PILC effect in far-field scattering microscopy imaging. Owing to the PILC effect, the scattering signal gain of plasmonic nanoparticles was found to be larger than that of the background, and the imaging visibility of plasmonic nanoparticles was improved by 2.4-fold for silver nanoparticles (AgNPs) and 1.6-fold for gold nanorods (AuNRs). Successful observation of the PILC effect visually together with application in enhanced visibility in cancer cell imaging by this composite illumination system might open an exciting prospect of light scattering microscopy imaging techniques with largely increased visibility.

HSI colour-coded analysis of scattered light of single plasmonic nanoparticles

Single plasmonic nanoparticles (PNPs) analysis with dark-field microscopic imaging (iDFM) has attracted much attention in recent years. The ability for quantitative analysis of iDFM is critical, but cumbersome, for characterizing and analyzing the scattered light of single PNPs. Here, a simple automatic HSI colour coding method is established for coding dark-field microscopic (DFM) images of single PNPs with localized surface plasmon resonance (LSPR) scattered light, showing that hue value in the HSI system can realize accurate quantitative analysis of iDFM and providing a novel approach for quantitative chemical and biochemical imaging at the single nanoparticle level.

Precision improvement in dark-field microscopy imaging by using gold nanoparticles as an internal reference: a combined theoretical and experimental study

Low accuracy is a big obstacle in the dark-field microscopy imaging (iDFM) technique in practical applications. In order to reduce the deviations and fluctuations in the observed or snapped scattered light in the iDFM technique caused by unavoidable measurement errors, bare gold nanoparticles (AuNPs) were introduced as an internal reference (IR). The feasibility of using AuNPs as the IR in iDFM in theory was verified. The function of the IR in improving the precision of the acquired data through post data analysis was identified by three kinds of experiments: monitoring the oxidation process of silver nanoparticles (AgNPs) at room temperature, quantifying the level of glucose with AgNPs used as probes and quantifying the change in the light intensity of AuNPs after the plasmon resonance energy transfer (PRET) between AuNPs and tetramethylrhodamine (TAMRA).

The optical, photothermal, and facile surface chemical properties of gold and silver nanoparticles in biodiagnostics, therapy, and drug delivery

Nanotechnology is a rapidly growing area of research in part due to its integration into many biomedical applications. Within nanotechnology, gold and silver nanostructures are some of the most heavily utilized nanomaterial due to their unique optical, photothermal, and facile surface chemical properties. In this review, common colloid synthesis methods and biofunctionalization strategies of gold and silver nanostructures are highlighted. Their unique properties are also discussed in terms of their use in biodiagnostic, imaging, therapeutic, and drug delivery applications. Furthermore, relevant clinical applications utilizing gold and silver nanostructures are also presented. We also provide a table with reviews covering related topics.

Nano/micro and spectroscopic approaches to food pathogen detection

Despite continuing research efforts, timely and simple pathogen detection with a high degree of sensitivity and specificity remains an elusive goal. Given the recent explosion of sensor technologies, significant strides have been made in addressing the various nuances of this important global challenge that affects not only the food industry but also human health. In this review, we provide a summary of the various ongoing efforts in pathogen detection and sample preparation in areas related to Fourier transform infrared and Raman spectroscopy, light scattering, phage display, micro/nanodevices, and nanoparticle biosensors. We also discuss the advantages and potential limitations of the detection methods and suggest next steps for further consideration.

Rapid synthesis of highly luminescent and stable Au20 nanoclusters for active tumor-targeted imaging in vitro and in vivo

Rapid synthesis of protein-stabilized Au20 nanoclusters (Au20NCs) with high fluorescence quantum yield (QY) up to ∼15% is successfully achieved by manipulating the reaction kinetics. The as-obtained Au20NCs, identified by mass spectrometry, have an average size of 2.6 nm, with strong fluorescence emission at 620 nm (2.00 eV) upon excitation at either 370 nm (3.35 eV) or 470 nm (2.64 eV). The advantages of the as-obtained Au20NCs, including small sizes, high fluorescence QY, excellent photostability, non-toxicity, and good stability in biological media, make them ideal candidates as good luminescent probes for optical imaging in vitro and in vivo. Our results demonstrate that the uptake of Au20NCs by both cancer cells and tumor-bearing nude mice can be improved by receptor-mediated internalization, compared with that by passive targeting. Because of their selective accumulation at the tumor sites, the Au20NC probes can be used as potential indicators for cancer diagnosis. This work not only provides a new understanding of the rapid synthesis of highly luminescent Au20NCs but also demonstrates that the functionalized-Au20NCs are excellent probes for active tumor-targeted imaging in vitro and in vivo.

Effects of nanoparticle size and cell type on high sensitivity cell detection using a localized surface plasmon resonance biosensor

A localized surface plasmon resonance (LSPR) effect was used to distinguish cell concentration on ordered arrays of Au nanoparticles (NPs) on glass substrates. Human-derived retinal pigment epithelial RPE-1 cells with flatter bodies and higher confluency were compared with breast cancer MCF-7 cells. Nanosphere lithography was used to form Au NPs with average diameters of 500 and 60 nm in order to compare cell detection range, resonance peak shift, and cell concentration sensitivity. A larger cell concentration range was detected on the larger 500 nm Au NPs compared to 60 nm Au NPs (8.56 × 10(3)-1.09 × 10(6) vs. 3.43 × 10(4)-2.73 × 10(5)cells/ml). Resonance peak shift could distinguish RPE-1 from MCF-7 cells on both Au NPs. RPE-1 cells consistently displayed larger resonance peak shifts compared to MCF-7 cells until the detection became saturated at higher concentration. For both types of cells, higher concentration sensitivity in the range of ~10(4)-10(6)cells/ml was observed on 500 nm compared to 60 nm Au NPs. Our results show that cells on Au NPs can be detected in a large range and at low concentration. Optimal cell sensing can be achieved by altering the dimensions of Au NPs according to different cell characteristics and concentrations.

Applications of gold nanoparticles in the detection and identification of infectious diseases and biothreats

The situation of infectious diseases and biothreats all over the world remains serious. The effective identification of such diseases plays a very important role. In recent years, gold nanoparticles have been widely used in biosensor design to improve the performance for the detection of infectious diseases and biothreats. Here, recent advances of gold-nanoparticle-based biosensors in this field are summarized.