Recent Developments in High-Performance Liquid Chromatography Stationary Phases

Preparation of two zwitterionic polymer functionalized stationary phases and comparative evaluation under mixed-mode of reversed phase/ hydrophilic interaction/ion exchange chromatography

Zwitterions are a promising choice to prepare separation materials because of their hydrophilicity and biocompatibility. We described the preparation of two zwitterionic polymer functionalized stationary phases and evaluation under mixed-mode chromatography. A zwitterionic monomer, S-(4-vinylbenzyl) cysteine (SVC), was synthesized and bonded to silica via reversible addition fragmentation chain transfer (RAFT) polymerization to afford a zwitterionic stationary phase, Sil-SVC. A hydrophobic monomer, N-(4-phenylbutan-2-yl) acrylamide (NPA), was copolymerized with SVC onto the stationary phase (Sil-SVCNPA) for comparison. The stationary phases were characterized with FT-IR, TGA, EA, and zeta-potential measurements. Mobile phase composition (ACN content, pH and salt concentration) was varied to study the retention property. Linear solvation energy relationship and Van't Hoff plot were used to investigate the retention mechanism and how chromatographic conditions influenced it. Both stationary phases showed a mixed-mode of RPLC/HILIC/IEC and satisfactory performance in separating hydrophobic analytes (alkylbenzenes and polycyclic aromatic hydrocarbons), hydrophilic nucleotide and bases, and anions, high column efficiency of 60,000 plates·m-1 was achieved. In summary, zwitterionic polymers are attractive options to prepare stationary phases and the retention property can be easily regulated by copolymer.

Surface-bubble-modulated liquid chromatography: an experimental strategy for identification of molecular processes of solute retention in reversed-phase separation systems

Molecular level understanding of the chemistry at the aqueous/hydrophobe interface is crucial to separation processes in aqueous media, such as reversed-phase liquid chromatography (RPLC) and solid-phase extraction (SPE). Despite significant advances in our knowledge of the solute retention mechanism in these reversed-phase systems, direct observation of the behavior of molecules and ions at the interface in reversed-phase systems still remains a major challenge and experimental probing techniques that provide the spatial information of the distribution of molecules and ions are required. This review addresses surface-bubble-modulated liquid chromatography (SBMLC), which has a stationary gas phase in a column packed with hydrophobic porous materials and enables one to observe the molecular distribution in the heterogeneous reversed-phase systems consisting of the bulk liquid phase, the interfacial liquid layer, and the hydrophobic materials. The distribution coefficients of organic compounds referring to their accumulations onto the interface of alkyl- and phenyl-hexyl-bonded silica particles exposed to water or acetonitrile-water and into the bonded layers from the bulk liquid phase are determined by SBMLC. The experimental data obtained by SBMLC show that the water/hydrophobe interface exhibits an accumulation selectivity for organic compounds, which is quite different from that of the interior of the bonded chain layer, and the overall separation selectivity of the reversed-phase systems is determined by the relative sizes of the aqueous/hydrophobe interface and the hydrophobe. The solvent composition and the thickness of the interfacial liquid layer formed on octadecyl-bonded (C₁₈) silica surfaces are also estimated from the bulk liquid phase volume determined by the ion partition method employing small inorganic ions as probes. It is clarified that various hydrophilic organic compounds as well as inorganic ions recognize the interfacial liquid layer formed on the C₁₈-bonded silica surfaces as being different from the bulk liquid phase. The behavior of some solute compounds exhibiting substantially weak retention in RPLC or the so-called negative adsorption, such as urea, sugars, and inorganic ions, can rationally be interpreted with a partition between the bulk liquid phase and the interfacial liquid layer. The spatial distribution of solute molecules and the structural properties of the solvent layer on the C₁₈-bonded layer determined by the liquid chromatographic methods are discussed in comparison to the results obtained by other research groups using molecular simulation methods.

Peak broadening caused by using different micro-liquid chromatography detectors

Advancements in column technology resulted in smaller particles and more efficient phases. In parallel, the use of columns with reduced dimensions is becoming more common. This means the effective column volume is also decreased, thereby making the systems more susceptible to effects of band broadening due to extra-column volume. Despite these trends and the fact that a growing number of miniaturized liquid chromatography systems are being offered commercially, manufacturers often stick to the modular concept with dedicated units for pumps, column oven, and detectors. This modular design results in long connection capillaries, which leads to extra-column band broadening and consequently prevents the exploitation of the intrinsic efficiency of state-of-the-art columns. In particular, band broadening post column has a considerable negative effect on efficiency. In this study, mass flow and concentration-dependent detectors were examined for their influence on band broadening using a micro-LC system. A mass spectrometric detector, an evaporative light scattering detector, two UV detectors, and a previously undescribed fluorescence detector were compared. The influence on efficiency is compared using plate height vs linear velocity data and peak variance. It is shown that an increase in the inner diameter after the post-column transfer capillary leads to significant loss in plate height. Comparing the UV detectors, it could be shown that the dispersion was reduced by 38% by the reduction of the post-column volume. The largest variance was found for the evaporative light scattering detector, which was 368% higher compared to the variance of the detector with the least effect on band broadening.

Temperature-responsive mixed-mode column for the modulation of multiple interactions

In this study, mixed-mode chromatography columns have been investigated using multiple analyte interactions. A mixed-mode chromatography column was developed using poly(N-isopropylacrylamide) (PNIPAAm) brush-modified silica beads and poly(3-acrylamidopropyl trimethylammonium chloride) (PAPTAC) brush-modified silica beads. PNIPAAm brush-modified silica beads and PAPTAC brush-modified silica beads were prepared by atom transfer radical polymerization. The beads were then packed into a stainless-steel column in arbitrary compositions. The elution studies evaluated the column performance on hydrophobic, electrostatic, and therapeutic drug samples using steroids, adenosine nucleotide, and antiepileptic drugs as analytes, respectively. Steroids exhibited an increased retention time when the column temperature was increased. The retention of adenosine nucleotides increased with the increasing composition of the PAPTAC-modified beads in the column. The antiepileptic drugs were separated using the prepared mixed-mode columns. An effective separation of antiepileptic drugs was observed on a 10:1 PNIPAAm:PAPTAC column because the balance between the hydrophobic and electrostatic interactions with antiepileptic drugs was optimized for the bead composition. Oligonucleotides were also separated using mixed-mode columns through multiple hydrophobic and electrostatic interactions. These results demonstrate that the developed mixed-mode column can modulate multiple hydrophobic and electrostatic interactions by changing the column temperature and composition of the packed PNIPAAm and PAPTAC beads.

LC-Q-TOF-MS/MS detection of food flavonoids: principle, methodology, and applications

Flavonoids have been attracting increasing research interest because of their multiple health promoting effects. However, many flavonoids with similar structures are present in foods, often at low concentrations, which increases the difficulty of their separation and identification. Liquid chromatography-quadrupole time-of-flight tandem mass spectrometry (LC-Q-TOF-MS/MS) has become one of the most widely used techniques for flavonoid detection. LC-Q-TOF-MS/MS can achieve highly efficient separation by LC; it also provides structural information regarding flavonoids by Q-TOF-MS/MS. This review presents a comprehensive summary of the scientific principles and detailed methodologies (e.g., qualitative determination, quantitative determination, and data processing) of LC-Q-TOF-MS/MS specifically for food flavonoids. It also discusses the recent applications of LC-Q-TOF-MS/MS in determination of flavonoid types and contents in agricultural products, changes in their structures and contents during food processing, and metabolism in vivo after consumption. Moreover, it proposes necessary technological improvements and potential applications. This review would facilitate the scientific understanding of theory and technique of LC-Q-TOF-MS/MS for flavonoid detection, and promote its applications in food and health industry.

Liquid chromatography and mass spectrometry for the analysis of acylglycerols in art and archeology

Lipid characterization in art and archeology, together with the study of lipid degradation processes, is an important research area in heritage science. Lipid-based materials have been used as food since ancient times, but also employed as illuminants and as ingredients in cosmetic, ritual, and pharmaceutical preparations. Both animal and plant lipids have also been processed to produce materials used in art and crafts, such as paint binders, varnishes, waterproofing agents, and coatings. Identifying the origin of the lipid materials is challenging when they are found in association with artistic historical objects. This is due to the inherent complex composition of lipids, their widespread occurrence, and the chemical alterations induced by ageing. The most common approach for lipid characterization in heritage objects entails profiling fatty acids by gas chromatography/mass spectrometry after saponification or transesterification. New developments in high-performance liquid chromatography coupled with mass spectrometry (HPLC-MS) for the characterization of acylglycerols, together with more efficient sample treatments, have fostered the introduction of liquid chromatography for characterizing the lipid profile in heritage objects. This review reports the latest developments and applications of HPLC-MS for the characterization of lipid materials in the field of heritage science. We describe the various approaches for sample pretreatment and highlight the advantages and limitations of HPLC-MS in the analysis of paint and archeological samples. © 2020 John Wiley & Sons Ltd.

Advancements in the preparation and application of monolithic silica columns for efficient separation in liquid chromatography

Fast and efficient separation remains a big challenge in high performance liquid chromatography (HPLC). The need for higher efficiency and resolution in separation is constantly in demand. To achieve that, columns developed are rapidly moving towards having smaller particle sizes and internal diameters (i.d.). However, these parameters will lead to high back-pressure in the system and will burden the pumps of the HPLC instrument. To address this limitation, monolithic columns, especially silica-based monolithic columns have been introduced. These columns are being widely investigated for fast and efficient separation of a wide range of molecules. The present article describes the current methods developed to enhance the column efficiency of particle packed columns and how silica monolithic columns can act as an alternative in overcoming the low permeability of particle packed columns. The fundamental processes behind the fabrication of the monolith including the starting materials and the silica sol-gel process will be discussed. Different monolith derivatization and end-capping processes will be further elaborated and followed by highlights of the performance such monolithic columns in key applications in different fields with various types of matrices.

Ultrasensitive detection of ochratoxin A based on biomimetic nanochannel and catalytic hairpin assembly signal amplification

In this paper, an ultrasensitive nanochannel sensor has been proposed for label-free Ochratoxin A (OTA) assay in combination with graphene oxide (GO) and catalyzed hairpin assembly (CHA). The high-performance sensor is segmented into two parts. One is composed of graphene oxide (GO) and DNA probes. In the presence of target OTA, OTA works as a catalyst to trigger the self-assembly pathway of the two probes and initiate the cycling of CHA circuits, which results in numerous double-stranded DNAs (dsDNA) in solution. The excess ssDNA probes are removed by GO. The other part is composed of biomimetic nanochannel coated with polyethyleneimine (PEI) and Zr⁴⁺, which can quantify the concentration of OTA by detecting the dsDNA in solution. The nanofluidic device has a detection limit of as low as 6.2 pM with an excellent selectivity. The nanochannel based assay was used to analyse food samples (red wine) with satisfied results. Thus, the proposed analytical method will provide a new approach the detection of OTA and can be applied for quality control to ensure food safety.

Recent applications of chemometrics in one- and two-dimensional chromatography

The proliferation of increasingly more sophisticated analytical separation systems, often incorporating increasingly more powerful detection techniques, such as high-resolution mass spectrometry, causes an urgent need for highly efficient data-analysis and optimization strategies. This is especially true for comprehensive two-dimensional chromatography applied to the separation of very complex samples. In this contribution, the requirement for chemometric tools is explained and the latest developments in approaches for (pre-)processing and analyzing data arising from one- and two-dimensional chromatography systems are reviewed. The final part of this review focuses on the application of chemometrics for method development and optimization.

Challenges and Advances in the Fabrication of Monolithic Bioseparation Materials and their Applications in Proteomics Research

High-performance liquid chromatography integrated with tandem mass spectrometry (HPLC-MS/MS) has become a powerful technique for proteomics research. Its performance heavily depends on the separation efficiency of HPLC, which in turn depends on the chromatographic material. As the "heart" of the HPLC system, the chromatographic material is required to achieve excellent column efficiency and fast analysis. Monolithic materials, fabricated as continuous supports with interconnected skeletal structure and flow-through pores, are regarded as an alternative to particle-packed columns. Such materials are featured with easy preparation, fast mass transfer, high porosity, low back pressure, and miniaturization, and are next-generation separation materials for high-throughput proteins and peptides analysis. Herein, the recent progress regarding the fabrication of various monolithic materials is reviewed. Special emphasis is placed on studies of the fabrication of monolithic capillary columns and their applications in separation of biomolecules by capillary liquid chromatography (cLC). The applications of monolithic materials in the digestion, enrichment, and separation of phosphopeptides and glycopeptides from biological samples are also considered. Finally, advances in comprehensive 2D HPLC separations using monolithic columns are also shown.

A Review of Neurotransmitters Sensing Methods for Neuro-Engineering Research

Neurotransmitters as electrochemical signaling molecules are essential for proper brain function and their dysfunction is involved in several mental disorders. Therefore, the accurate detection and monitoring of these substances are crucial in brain studies. Neurotransmitters are present in the nervous system at very low concentrations, and they mixed with many other biochemical molecules and minerals, thus making their selective detection and measurement difficult. Although numerous techniques to do so have been proposed in the literature, neurotransmitter monitoring in the brain is still a challenge and the subject of ongoing research. This article reviews the current advances and trends in neurotransmitters detection techniques, including in vivo sampling and imaging techniques, electrochemical and nano-object sensing techniques for in vitro and in vivo detection, as well as spectrometric, analytical and derivatization-based methods mainly used for in vitro research. The document analyzes the strengths and weaknesses of each method, with the aim to offer selection guidelines for neuro-engineering research.

Experimental- and simulation-based investigations of coupling a mobile phase gradient with a continuous stationary phase gradient

This work seeks to explore and understand the effects of column orientation and degree of modification of continuous stationary phase gradient columns under a mobile phase gradient using both simulations and experiments. Peak parameters such as retention times, peak widths and resolution are obtained for five phenolic compounds on a C₁₈-silica gradient stationary phase. Simulations show that peak widths for the solutes are dependent upon the fractional composition of C₁₈ and orientation of the stationary phase gradient when coupled to a mobile phase gradient. Also, when compared to a simulated uniform mixed-mode column, peak widths reach a minimum on the gradient column with a coverage higher than 50% C₁₈ where the column is oriented to have the C₁₈ dense region at the end. Experimentally, continuous stationary phase gradients were fabricated to have a total C₁₈ composition of 78% of the original uniform column with an exponential profile using a previously described destructive controlled rate infusion method. Under gradient mobile phase conditions, experimental retention times for the gradient column showed a significant increase compared to the original 100% C₁₈ column. Simulations with a similar C₁₈ composition, however, predicted decreased retention times from the original C₁₈ column. A statistical increase in the retention time of protocatechuic acid and decrease in the peak width of tyrosol, caffeic acid, and coumaric acid were noted when the gradient column was oriented to have the C₁₈ dense region located near the detector. Collectively, combining gradients in both the mobile and stationary phases can yield interesting neighboring ligand effects and peak broadening/focusing effects.

Doing more with less: Evaluation of the use of high linear velocities in preparative supercritical fluid chromatography

The evaluation of higher than typical linear velocities is discussed for supercritical fluid chromatographic purifications on the preparative scale. SFC separation efficiency suffers far less at high linear velocities than HPLC by the rapid mass transfer of analytes carried by compressed CO₂ through the stationary phase. The technique is discussed using chiral test compounds and columns. In many cases, running at high linear velocities can yield significant time savings and decreased consumption of mobile phase solvent, while also lowering energy consumption. Within the practical limitations of commercial instrumentation, using 20 μm particles can aid in achieving higher linear velocities not attainable with smaller 5 μm particles, particularly when running with high percentages of organic co-solvent. Use of larger particles for the stationary phase also lowers the associated column cost. These benefits can yield an overall purification process that is more productive and environmentally friendly.

A versatile signal-enhanced ECL sensing platform based on molecular imprinting technique via PET-RAFT cross-linking polymerization using bifunctional ruthenium complex as both catalyst and sensing probes

Molecularly imprinted technique (MIT) has proven to be a significant tool in the analyzing area in virtue of its obvious advantages such as specific recognition, favorable stability to high temperature and higher sensitivity. Electrochemiluminescence (ECL) technology has also been receiving enormous attention as a powerful tool in sensing fields. However, sensors based on the combination of MIT and ECL technologies have seldom been reported yet. Herein, we find that Ru(bpy)₃²⁺ cannot only work as an efficient catalyst for photo-induced electron transfer-reversible addition-fragmentation chain transfer (PET-RAFT) polymerization, but also as a sensing probe for ECL sensor. Based on this, we successfully construct ECL sensors via the combination of MIT and ECL techniques. In details, poly(methacrylic acid) (PMAA) and cross-linked PMAA were synthesized first via a well-controlled PET-RAFT polymerization using Ru(bpy)₃²⁺ as catalyst under illumination of visible light with a wavelength of 460 nm, as confirmed by ¹H NMR and gel permeation chromatography (GPC). Then, negatively-charged Au nanoparticles (AuNPs) with average sizes of 20 nm were prepared and modified with Ru(bpy)₃²⁺ via electrostatic incorporation. MIPs were prepared on the surface of AuNPs using melamine (MEL) as the template via PET-RAFT controlled cross-linking polymerization. The MIPs modified AuNPs (AuNPs-MIPs) were then fixed on the surface of working electrode with Nafion to achieve a solid-state ECL sensing platform employing Ru(bpy)₃²⁺ as the ECL probes. The as-prepared sensor showed a wide detection range of 5.0 × 10^-13 - 5.0 × 10^-6 mol/L and a low detection limit of 1.0 × 10^-13 mol/L (S/N ≥ 3) was reached in the detection of MEL. Moreover, further tests for analyzing MEL structural analogues proved that the constructed ECL sensing platform could be utilized to detect various substances via specific recognitions.

Simultaneous non-polar and polar lipid analysis by on-line combination of HILIC, RP and high resolution MS

Given the chemical diversity of lipids and their biological relevance, suitable methods for lipid profiling and quantification are demanded to reduce sample complexity and analysis times. In this work, we present a novel on-line chromatographic method coupling hydrophilic interaction liquid chromatography (HILIC) dedicated to class-specific separation of polar lipid to reversed-phase chromatography (RP) for non-polar lipid analysis. More specifically, the void volume of the HILIC separation-consisting of non-polar lipids- is transferred to the orthogonal RP column enabling the on-line combination of HILIC with RP without any dilution in the second dimension. In this setup the orthogonal HILIC and RP separations were performed in parallel and the effluents of both columns were combined prior to high-resolution MS detection, offering the full separation space in one analytical run. Rapid separation for both polar and non-polar lipids within only 15 min (including reequilibration time) was enabled using sub-2 μm particles and UHPLC. The method proved to be robust with excellent retention time stability (RSDs < 1%) and LODs in the fmol to pmol (absolute on column) range even in the presence of complex biological matrix such as human plasma. The presented high-resolution LC-MS/MS method leads to class-specific separation of polar lipids and separation of non-polar lipids which is lost in conventional HILIC separations. HILIC-RP-MS is a promising tool for targeted and untargeted lipidomics workflows as three interesting features are combined namely (1) the decreased run time of state of the art shotgun MS methods, (2) the elevated linear dynamic range inherent to chromatographic separation and (3) increased level of identification by separation of polar and non-polar lipid classes.

An ultrasensitive signal-on electrochemical aptasensor for ochratoxin A determination based on DNA controlled layer-by-layer assembly of dual gold nanoparticle conjugates

In this paper, a novel ultrasensitive signal-on electrochemical aptasensor has been proposed for Ochratoxin A (OTA) assay based on DNA controlled layer-by-layer assembly of dual gold nanoparticle (AuNP) conjugates. To construct the aptasensor, the 1^st AuNP conjugate was prepared by simultaneous immobilization of the capture probe 2 (CP2) and bridge probe (BP) onto the AuNPs. Then, OTA aptamer was loaded onto 1^st AuNPs by hybridization with CP2. The 1^st AuNP conjugate can be further immobilized onto the electrode by hybridization between BP and capture probe 1 (CP1), which was pre-immobilized on Au electrode. The 2^nd AuNP conjugate was prepared by immobilization of ferrocene (Fc) tagged SH-signal probe (SSP). Due to the recognition between aptamer on 1^st AuNP conjugate and OTA, CP2 was reformed in the ssDNA state, which can be utilized as the anchor for immobilization of 2^nd AuNP conjugate for electrochemical signal reporting. Because of the high surface-to-volume ratio and good conductivity of AuNPs, this dual AuNPs assembled nanoarchitecture finally lead to greatly improved abilities to load a large number of Fc molecules and significantly amply the electrochemical response even at a low target concentration. Both qualitative and quantitative analysis of OTA were thus realized by differential pulse voltammetry (DPV) signals, resulting in an excellent detection limit of 0.001 ppb and a wide dynamic range from 0.001 to 500 ppb over 6 orders of magnitude. Moreover, the real sample analysis towards OTA spiked wine samples was favorable, implying a great potential for practical applications. We envision that this unique dual AuNP conjugate assembly strategy would pave a new avenue for the development of versatile signal amplified electrochemical aptasensors.

A Novel Lipidomics Workflow for Improved Human Plasma Identification and Quantification Using RPLC-MSn Methods and Isotope Dilution Strategies

Lipid identification and quantification are essential objectives in comprehensive lipidomics studies challenged by the high number of lipids, their chemical diversity, and their dynamic range. In this work, we developed a tailored method for profiling and quantification combining (1) isotope dilution, (2) enhanced isomer separation by C30 fused-core reversed-phase material, and (3) parallel Orbitrap and ion trap detection by the Orbitrap Fusion Lumos Tribid mass spectrometer. The combination of parallelizable ion analysis without time loss together with different fragmentation techniques (HCD/CID) and an inclusion list led to higher quality in lipid identifications exemplified in human plasma and yeast samples. Moreover, we used lipidome isotope-labeling of yeast (LILY)-a fast and efficient in vivo labeling strategy in Pichia pastoris-to produce (nonradioactive) isotopically labeled eukaryotic lipid standards in yeast. We integrated the ¹³C lipids in the LC-MS workflow to enable relative and absolute compound-specific quantification in yeast and human plasma samples by isotope dilution. Label-free and compound-specific quantification was validated by comparison against a recent international interlaboratory study on human plasma SRM 1950. In this way, we were able to prove that LILY enabled quantification leads to accurate results, even in complex matrices. Excellent analytical figures of merit with enhanced trueness, precision and linearity over 4-5 orders of magnitude were observed applying compound-specific quantification with ¹³C-labeled lipids. We strongly believe that lipidomics studies will benefit from incorporating isotope dilution and LC-MSn strategies.

Fast preparation of hybrid monolithic columns via photo-initiated thiol-yne polymerization for capillary liquid chromatography

Although several approaches have been developed to fabricate hybrid monoliths, it would still take a few hours to finish the formation of monoliths. Herein, photo-initiated thiol-yne polymerization was first adopted to in situ fabricate hybrid monoliths within the confines of UV-transparent fused-silica capillary. A silicon-containing diyne (1,3-diethynyltetramethyl-disiloxane, DYDS) was copolymerized with three multithiols, 1,6-hexanedithiol, trimethylolpropane tris(3-mercaptopropionate) and pentaerythriol tetrakis(3-mercaptopropionate), by using a binary porogenic system of diethylene glycol diethyl ether (DEGDE)/poly(ethylene glycol) (PEG200) within 10 min. Several characterizations of three hybrid monoliths (assigned as I, II and III, respectively) were performed. The results showed that these hybrid monoliths possessed bicontinuous porous structure, which was remarkably different from that via typical free-radical polymerization. The highest column efficiency of 76,000 plates per meter for butylbenzene was obtained on the column I in reversed-phase liquid chromatography (RPLC). It was observed that the efficiencies for strong-retained butylbenzene were almost close to those of weak-retained benzene, indicating a retention-independent efficient performance of small molecules on hybrid column I. The surface area of this hybrid monolith was very small in the dry state (less than 10.0 m²/g), and the chromatographic behavior of hybrid monolithic columns would be possibly explained by radical-mediated step-growth process of thiol-yne polymerization. Finally, the column I was applied for separation of BSA tryptic digest by cLC-MS/MS, indicating satisfactory separation ability for complicated samples.

3-Dimensional X-ray microtomography methodology for characterization of monolithic stationary phases and columns for capillary liquid chromatography - A tutorial

In this tutorial we describe a fast, nondestructive, three-dimensional (3-D) view approach to be used in morphology characterization of capillary monoliths and columns by reconstruction from X-ray microtomography (XMT) obtained by acquiring projection images of the sample from a number of different directions. The method comprises imaging acquisition, imaging reconstruction using specific algorithms and imaging analysis by generation of a 3-D image of the sample from radiographic images. The 3-D images show the morphological data for bulk macropore space and skeleton connectivity of the monoliths and were compared with other images from imaging techniques such as scanning electron microscopy (SEM) and field emission scanning electron microscopy (FESEM) and with chromatographic performance. The 3-D XMT methodology is applicable for organic and inorganic capillary chromatographic monolithic materials and it allows the acquisition of many hundreds (in our case 1001 projections) of longitudinal and cross-sectional images in a single session, resolving morphological details with a 3D-view of the monolithic structure, inclusive inside the column in a sectional structure with volume (three dimensions) when compared to the sectional structure area (with only two dimensions) when using SEM and FESEM techniques.

Chemometric-assisted method development in hydrophilic interaction liquid chromatography: A review

With an enormous growth in the application of hydrophilic interaction liquid chromatography (HILIC), there has also been significant progress in HILIC method development. HILIC is a chromatographic method that utilises hydro-organic mobile phases with a high organic content, and a hydrophilic stationary phase. It has been applied predominantly in the determination of small polar compounds. Theoretical studies in computer-aided modelling tools, most importantly the predictive, quantitative structure retention relationship (QSRR) modelling methods, have attracted the attention of researchers and these approaches greatly assist the method development process. This review focuses on the application of computer-aided modelling tools in understanding the retention mechanism, the classification of HILIC stationary phases, prediction of retention times in HILIC systems, optimisation of chromatographic conditions, and description of the interaction effects of the chromatographic factors in HILIC separations. Additionally, what has been achieved in the potential application of QSRR methodology in combination with experimental design philosophy in the optimisation of chromatographic separation conditions in the HILIC method development process is communicated. Developing robust predictive QSRR models will undoubtedly facilitate more application of this chromatographic mode in a broader variety of research areas, significantly minimising cost and time of the experimental work.

Recent advances in capillary ultrahigh pressure liquid chromatography

In the twenty years since its initial demonstration, capillary ultrahigh pressure liquid chromatography (UHPLC) has proven to be one of most powerful separation techniques for the analysis of complex mixtures. This review focuses on the most recent advances made since 2010 towards increasing the performance of such separations. Improvements in capillary column preparation techniques that have led to columns with unprecedented performance are described. New stationary phases and phase supports that have been reported over the past decade are detailed, with a focus on their use in capillary formats. A discussion on the instrument developments that have been required to ensure that extra-column effects do not diminish the intrinsic efficiency of these columns during analysis is also included. Finally, the impact of these capillary UHPLC topics on the field of proteomics and ways in which capillary UHPLC may continue to be applied to the separation of complex samples are addressed.

Preparation of a silica stationary phase co-functionalized with Wulff-type phenylboronate and C12 for mixed-mode liquid chromatography

A silica stationary phase was designed and synthesized through the co-functionalization of silica with Wulff-type phenylboronate and C12 for mixed-mode liquid chromatography applications. The as-synthesized stationary phase was characterized by elemental analysis and Fourier Transform-InfraRed Spectroscopy (FT-IR). Retention mechanisms, including boronate affinity (BA), reversed-phase (RP) and anion-exchange (AE), were involved. Retention mechanism switching was easily realized by adjustment of the mobile phase constitution. Cis-diol compounds could be selectively captured under neutral conditions in BA mode and off-line separated in RP mode. Neutral, basic, acidic and amphiprotic compounds were chromatographed on the column in RP chromatography, while inorganic anions were chromatographed in AE chromatography to characterize the mixed-mode nature of the prepared stationary phase. In addition, the RP performance was compared with an octadecyl silica column in terms of column efficiency (N/m), asymmetry factor (A_f), retention factor (k) and resolution (Rs). The prepared stationary phase offered multiple interactions with analytes in addition to hydrophobic interactions under RP elution conditions. Based on the mixed-mode properties, off-line 2D-LC, for selective capture and separation of urinary nucleosides, was successfully realized on a single column, demonstrating its powerful application potential for complex samples.

Ultrafast chiral separations for high throughput enantiopurity analysis

Ultrafast chiral chromatography enables high throughput enantiopurity analysis (over one thousand samples in an 8 h workday) for enantioselective synthesis investigations.

Off-line mixed-mode liquid chromatography coupled with reversed phase high performance liquid chromatography-high resolution mass spectrometry to improve coverage in lipidomics analysis

The confident identification and in-depth profiling of molecular lipid species remain to be a challenge in lipidomics analysis. In this work, an off-line two-dimensional mixed-mode and reversed-phase liquid chromatography (RPLC) method combined with high-field quadrupole orbitrap mass spectrometer (Q Exactive HF) was developed to profile lipids from complex biological samples. In the first dimension, 22 different lipid classes were separated on a monolithic silica column with elution order from neutral to polar lipids. A total of 13 fractions were collected and run on a RPLC C30 column in the second dimension for further separation of the lipid molecular species based on their hydrophobicity, with the elution order being determined by both the length and degree of unsaturation in the fatty-acyl chain. The method was applied to analyze lipids extracted from rat plasma and rat liver. Fatty acid methyl ester analysis by gas chromatography-mass spectrometry was used to identify the fatty acyls from total lipid extracts, which provided a more confident identification of the lipid species present in these samples. More than 800 lipids were identified in each sample and their molecular structures were confidentially confirmed using tandem mass spectrometry (MS/MS). The number of lipid molecular species identified in both rat plasma and rat liver by this off-line two-dimensional method is approximately twice of that by one-dimensional RPLC-MS/MS employing a C30 column. This off-line two-dimensional mixed-mode LC-RPLC-MS/MS method is a promising technique for comprehensive lipid profiling in complex biological matrices.

Mass spectrometry-based plant metabolomics: Metabolite responses to abiotic stress

Metabolomics is one omics approach that can be used to acquire comprehensive information on the composition of a metabolite pool to provide a functional screen of the cellular state. Studies of the plant metabolome include analysis of a wide range of chemical species with diverse physical properties, from ionic inorganic compounds to biochemically derived hydrophilic carbohydrates, organic and amino acids, and a range of hydrophobic lipid-related compounds. This complexitiy brings huge challenges to the analytical technologies employed in current plant metabolomics programs, and powerful analytical tools are required for the separation and characterization of this extremely high compound diversity present in biological sample matrices. The use of mass spectrometry (MS)-based analytical platforms to profile stress-responsive metabolites that allow some plants to adapt to adverse environmental conditions is fundamental in current plant biotechnology research programs for the understanding and development of stress-tolerant plants. In this review, we describe recent applications of metabolomics and emphasize its increasing application to study plant responses to environmental (stress-) factors, including drought, salt, low oxygen caused by waterlogging or flooding of the soil, temperature, light and oxidative stress (or a combination of them). Advances in understanding the global changes occurring in plant metabolism under specific abiotic stress conditions are fundamental to enhance plant fitness and increase stress tolerance. © 2015 Wiley Periodicals, Inc. Mass Spec Rev 35:620-649, 2016.