Portable Diagnosis Method of Hyperkalemia Using Potassium-Recognizable Poly(N-isopropylacrylamide-co-benzo-15-crown-5-acrylamide) Copolymers

A K+-sensitive photonic crystal hydrogel sensor for efficient visual monitoring of hyperkalemia/hypokalemia

Potassium ions (K⁺) play crucial roles in many biological processes. Abnormal K⁺ levels in the body are usually associated with physiological disorders or diseases, and thus, developing K⁺-sensitive sensors/devices is of great importance for disease diagnosis and health monitoring. Herein, we report a K⁺-sensitive photonic crystal hydrogel (PCH) sensor with bright structural colors for efficient monitoring of serum potassium. This PCH sensor consists of a poly(acrylamide-co-N-isopropylacrylamide-co-benzo-15-crown-5-acrylamide) (PANBC) smart hydrogel with embedded Fe₃O₄ colloidal photonic crystals (CPCs), which could strongly diffract visible light and endow the hydrogel with brilliant structural colors. The rich 15-crown-5 (15C5) units appended on the polymer backbone could selectively bind K⁺ ions to form stable 2 : 1 [15C5]₂/K⁺ supramolecular complexes. These bis-bidentate complexes served as physical crosslinkers to crosslink the hydrogel and contracted its volume, and thus reduced the lattice spacing of Fe₃O₄ CPCs and blue-shifted the light diffraction, and finally reported on the K⁺ concentrations by a color change of the PCH. Our fabricated PCH sensor possessed high K⁺ selectivity and pH- and thermo-sensitive response performances to K⁺. Most interestingly, the K⁺-responding PANBC PCH sensor could be conveniently regenerated via simple alternate flushing with hot/cold water due to the excellent thermosensitivity of the introduced PNIPAM moieties into the hydrogel. Such a PCH sensor provides a simple, low-cost and efficient strategy for visualized monitoring of hyperkalemia/hypokalemia, which will significantly promote the development of biosensors.

Synthesis of multicolor silver nanostructures for colorimetric sensing of metal ions (Cr3+, Hg2+ and K+) in industrial water and urine samples with different spectral characteristics

In this work, we have synthesized four different color (yellow, orange, green, and blue (multicolor)) silver nanostructures (AgNSs) by chemical reduction method where silver nitrate, sodium borohydride and hydrogen peroxide were used as reagents. The as-synthesized multicolor AgNSs were successfully functionalized with bovine serum albumin (BSA) and applied as a colorimetric sensor for the assaying of metal cations (Cr³⁺, Hg²⁺, and K⁺). The addition of metal ions (Cr³⁺, Hg²⁺, and K⁺) into BSA functionalized AgNSs (BSA-AgNSs) causes the aggregation of BSA-AgNSs, and are accompanied by visual color changes with red or blue shift in the surface plasmon resonance (SPR) band of BSA-AgNSs. The BSA-AgNSs show different SPR characteristic for each metal ions (Cr³⁺, Hg²⁺, and K⁺) with exhibiting different spectral shift and color change. The yellow color BSA-AgNSs (Y-BSA-AgNSs) act as a probe for sensing Cr³⁺, orange color BSA-AgNSs (O-BSA-AgNSs) act as probe for Hg²⁺ ion assay, green color BSA-AgNSs (G-BSA-AgNSs) act as a probe for the assaying of both K⁺ and Hg²⁺, and blue color BSA-AgNSs (B-BSA-AgNSs) act as a sensor for colorimetric detection of K⁺ ion. The detection limits were found to be 0.26 μM for Cr³⁺ (Y-BSA-AgNSs), 0.14 μM for Hg²⁺ (O-BSA-AgNSs), 0.05 μM for K⁺ (G-BSA-AgNSs), 0.17 μM for Hg²⁺ (G-BSA-AgNSs), and 0.08 μM for K⁺ (B-BSA-AgNSs), respectively. Furthermore, multicolor BSA-AgNSs were also applied for assaying of Cr³⁺, and Hg²⁺ in industrial water samples and K⁺ in urine sample.

Intracellular K+-Responsive Block Copolymer Micelles for Targeted Drug Delivery of Curcumin

Curcumin (CUR) is a natural bioactive compound that has attracted attention as a “golden molecule” due to its therapeutic properties against several types of tumors. Nonetheless, the antitumor application of CUR is hampered due to its extremely low aqueous solubility and chemical instability. Herein, a novel type of CUR-loaded polymeric micelles with intracellular K⁺-responsive controlled-release properties is designed and developed. The polymeric micelles are self-assembled by poly (N-isopropylacrylamide-co-acryloylamidobenzo-15-crown-5-co-N, N-dimethylacrylamide)-b-DSPE (PNDB-b-DSPE) block copolymers, and CUR. CUR is successfully loaded into the micelles with a CUR loading content of 6.26 wt%. The proposed CUR-PNDB-DSPE polymeric micelles exhibit a significant CUR release in simulated intracellular fluid due to the formation of 2 : 1 ‘‘sandwich’’ host–guest complexes of 15-crown-5 and K⁺, which lead to the hydrophilic outer shell of micelles to collapse and the drug to rapidly migrate out of the micelles. In vitro, the B16F10 cell experiment indicates that CUR-PNDB-DSPE micelles exhibit a high cellular uptake and excellent intracellular drug release in response to the intracellular K⁺ concentration. Moreover, CUR-PNDB-DSPE micelles show high cytotoxicity to B16F10 cells compared to free CUR and CUR-PEG-DSPE micelles. The polymeric micelles with intracellular K⁺-responsive controlled release properties proposed in this study provide a new strategy for designing novel targeted drug delivery systems for CUR delivery for cancer treatment.

Selective potassium uptake via biocompatible zeolite-polymer hybrid microbeads as promising binders for hyperkalemia

Patients with chronic kidney disease are at high risk of hyperkalemia that is associated with various life-threatening complications. Treatments primarily rely on orally administered potassium binding agents, along with low curative effects and various side effects. Herein, direct serum potassium uptake was realized via zeolite–heparin-mimicking-polymer hybrid microbeads. The preparation process involved the synthesis of the heparin-mimicking polymer via the in situ cross-linking polymerization of acrylic acid and N-vinylpyrrolidone in polyethersulfone solution, the fabrication of microbeads via zeolite-mixing, electro-spraying and phase-inversion, and the subsequent aqueous-phase modifications based on ion-exchange and metal-leaching. An ultra-high (about 88%) amount of zeolite could be incorporated and well locked inside the polymer matrix. Potassium uptake capability was verified in water, normal saline and human serum, showing high selectivity and fast adsorption. The microbeads exhibited satisfying blood compatibility, negligible hemolysis ratio, prolonged clotting time, inhibited contact activation, and enhanced antifouling property toward serum proteins and cells. The proposed approach toward zeolite–heparin-mimicking-polymer hybrid microbeads provided a cheap, efficient and safe treatment protocol of hyperkalemia for the high-risk patients.

•

Zeolite–heparin-mimicking-polymer hybrid microbeads were prepared for potassium uptake.

•

An ultra-high (~88%) amount of zeolite could be well locked inside the polymer matrix.

•

Potassium uptake by microbeads exhibited high selectivity and fast adsorption.

•

The microbeads exhibited excellent blood compatibility.

•

The proposed method is cheap, efficient and safe to treat hyperkalemia.

Development of a molecular K+ probe for colorimetric/fluorescent/photoacoustic detection of K. Anal Bioanal Chem 2020;412:6947-6957. [PMID: 32712812 DOI: 10.1007/s00216-020-02826-y]

The potassium ion (K⁺) plays significant roles in many biological processes. To date, great efforts have been devoted to the development of K⁺ sensors for colorimetric, fluorescent, and photoacoustic detection of K⁺ separately. However, the development of molecular K⁺ probes for colorimetric detection of urinary K⁺, monitoring K⁺ fluxes in living cells by fluorescence imaging, and photoacoustic imaging of K⁺ dynamics in deep tissues still remains an open challenge. Herein, we report the first molecular K⁺ probe (NK2) for colorimetric, fluorescent, and photoacoustic detection of K⁺. NK2 is composed of 2-dicyanomethylene-3-cyano-4,5,5-trimethyl-2,5-dihydrofuran (TCF) as the chromophore and phenylazacrown-6-lariat ether (ACLE) as the K⁺ recognition unit. Predominate features of NK2 include a short synthetic procedure, high K⁺ selectivity, large detection range (5-200 mM), and triple-channel detection manner. NK2 shows good response to K⁺ with obvious color changes, fluorescence enhancements (about threefold), and photoacoustic intensity changes. The existence of other metal ions (including Na⁺, Mg²⁺, Ca²⁺, Fe²⁺) and pH changes (6.5-9.0) have no obvious influence on K⁺ sensing of NK2. Portable test strips stained by NK2 can be used to qualitatively detect urinary K⁺ by color changes for self-diagnosis of diseases induced by high levels of K⁺. NK2 can be utilized to monitor K⁺ fluxes in living cells by fluorescent imaging. We also find its excellent performance in photoacoustic imaging of different K⁺ concentrations in the mouse ear. NK2 is the first molecular K⁺ probe for colorimetric, fluorescent, and photoacoustic detection of K⁺ in urine, in living cells, and in the mouse ear. The development of NK2 will broaden K⁺ probes' design and extend their applications to different fields. Graphical abstract.

A highly selective, colorimetric, and environment-sensitive optical potassium ion sensor

Potassium ions (K⁺) play vital roles in many biological processes and thus highly selective sensors for K⁺ are critical for disease diagnosis and health monitoring. Herein, we report a colorimetric K⁺ sensor (KS7) in which a hemicyanine dye was used as a fluorophore and phenylaza-[18]crown-6 lariat ether (ACLE) was utilized as a K⁺ ligand. The maximum absorption peak of KS7 shifted hypsochromically by 77 nm (from 515 to 438 nm) with an isosbestic point at 452 nm upon the addition of K⁺ to its aqueous solution accompanied by a color change from red to yellow. This sensor exhibited a linear response range to K⁺ from 1 to 200 mM, indicating its wide detection range for cellular, urinary, and environmental potassium ions. Further, this sensor is solvent-sensitive, implying its environmental sensitivity. For the demonstration of its applications, we prepared filter paper-based K⁺ test strips, which were used to detect K⁺ in urine conveniently.

30 s Response Time of K+ Ion-Selective Hydrogels Functionalized with 18-Crown-6 Ether Based on QCM Sensor

Potassium detection is critical in monitoring imbalances in electrolytes and physiological status. The development of rapid and robust potassium sensors is desirable in clinical chemistry and point-of-care applications. In this study, composite supramolecular hydrogels are investigated: polyethylene glycol methacrylate and acrylamide copolymer (P(PEGMA-co-AM)) are functionalized with 18-crown-6 ether by employing surface initiated polymerization. Real-time potassium ion monitoring is realized by combining these compounds with quartz crystal microbalance. The device demonstrates a rapid response time of ≈30 s and a concentration detection range from 0.5 to 7.0 × 10^-3 m. These hydrogels also exhibit high reusability and K⁺ ion selectivity relative to other cations in biofluids such as Na⁺ , NH₄⁺ , Mg²⁺ , and Ca²⁺ . These results provide a new approach for sensing alkali metal ions using P(PEGMA-co-AM) hydrogels.

Potassium-sensitive poly(N-isopropylacrylamide)-based hydrogels for sensor applications

In situcrosslinking polymerization of potassium sensitive hydrogels for advancedin vivosensor applications is studied in detail.

A Cryptand Metal-Organic Framework as a Platform for the Selective Uptake and Detection of Group I Metal Cations

The metal-organic framework (MOF) complex (H₃ O)₂ [Zn₄ (ur)(Hfdc)₂ (fdc)₄ ] (1, ur=urotropine, H₂ fdc=furan-2,5-dicarboxylic acid) incorporates cryptand-like cavities, which can be used to separate and detect Rb⁺ and Cs⁺ optically. This is the first example of the effective employment of a MOF material for optical detection of these cations.

Fluorescent probes and bioimaging: alkali metals, alkaline earth metals and pH

All living species and life forms have an absolute requirement for bio-functional metals and acid-base equilibrium chemistry owing to the critical roles they play in biological processes. Hence, a great need exists for efficient methods to detect and monitor biometals and acids. In the last few years, great attention has been paid to the development of organic molecule based fluorescent chemosensors. The availability of new synthetic fluorescent probes has made fluorescence microscopy an indispensable tool for tracing biologically important molecules and in the area of clinical diagnostics. This review highlights the recent advances that have been made in the design and bioimaging applications of fluorescent probes for alkali metals and alkaline earth metal cations, including lithium, sodium and potassium, magnesium and calcium, and for pH determination within biological systems.

The microfluidic synthesis of composite hollow microfibers for K+-responsive controlled release based on a host–guest system

Composite PLGA hollow microfibers with K⁺-responsive controlled-release characteristics are developed for drug delivery.

Controllable and Reversible Dimple-Shaped Aggregates Induced by Macrocyclic Recognition Effect

A novel dimethyl acrylate 18-membered macrocycle (DMECE), acting as both bifunctional monomer and cross-linker, was designed and synthesized, and thus employed to construct a series of macrocycle-containing amphiphilic hyperbranched polymers (HBPs). The macrocyclic recognition effect between the HBPs and alkali metal ions showed that Na(+) was introduced in 1:1 interactive mode, whereas K(+) and Rb(+) were in 2:1 ratio. Through the formation of the DMECE/K(+) = 2:1 rigid "sandwich" complex of amphiphilic hyperbranched polymers, dimple-shaped aggregates were observed by TEM, SEM and AFM. Moreover, the initial concentration, the nature of solvent, the mode and affinity of the macrocyclic recognition effect as well as the amount of K(+), were essential control factors for the formation of dimple-shaped aggregates. Most importantly, the macrocyclic recognition effect endows the reversibility of the dimple-shaped aggregates and the size controllability of its circular opening, which provides a new strategy for design novel macrocycle-containing HBPs and great potential application in the field of capture and release.

'Smart' nanoparticles as drug delivery systems for applications in tumor therapy

INTRODUCTION

In the therapy of clinical diseases such as cancer, it is important to deliver drugs directly to tumor sites in order to maximize local drug concentration and reduce side effects. This objective may be realized by using 'smart' nanoparticles (NPs) as drug delivery systems, because they enable dramatic conformational changes in response to specific physical/chemical stimuli from the diseased cells for targeted and controlled drug release.

AREAS COVERED

In this review, we first briefly summarize the characteristics of 'smart' NPs as drug delivery systems in medical therapy, and then discuss their targeting transport, transmembrane and endosomal escape behaviors. Lastly, we focus on the applications of 'smart' NPs as drug delivery systems for tumor therapy.

EXPERT OPINION

Biodegradable 'smart' NPs have the potential to achieve maximum efficacy and drug availability at the desired sites, and reduce the harmful side effects for healthy tissues in tumor therapy. It is necessary to select appropriate NPs and modify their characteristics according to treatment strategies of tumor therapy.

A novel, smart microsphere with K(+)-induced shrinking and aggregating properties based on a responsive host-guest system

A novel type of smart microspheres with K(+)-induced shrinking and aggregating properties is designed and developed on the basis of a K(+)-recognition host-guest system. The microspheres are composed of cross-linked poly(N-isopropylacrylamide-co-acryloylamidobenzo-15-crown-5) (P(NIPAM-co-AAB15C5)) networks. Due to the formation of stable 2:1 "sandwich-type" host-guest complexes between 15-crown-5 units and K(+) ions, the P(NIPAM-co-AAB15C5) microspheres significantly exhibit isothermally and synchronously K(+)-induced shrinking and aggregating properties at a low K(+) concentration, while other cations (e.g., Na(+), H(+), NH4(+), Mg(2+), or Ca(2+)) cannot trigger such response behaviors. Effects of chemical compositions of microspheres on the K(+)-induced shrinking and aggregating behaviors are investigated systematically. The K(+)-induced aggregating sensitivity of the P(NIPAM-co-AAB15C5) microspheres can be enhanced by increasing the content of crown ether units in the polymeric networks; however, it is nearly not influenced by varying the monomer and cross-linker concentrations in the microsphere preparation. State diagrams of the dispersed-to-aggregated transformation of P(NIPAM-co-AAB15C5) microspheres in aqueous solutions as a function of temperature and K(+) concentration are constructed, which provide valuable information for tuning the dispersed/aggregated states of microspheres by varying environmental K(+) concentration and temperature. The microspheres with synchronously K(+)-induced shrinking and aggregating properties proposed in this study provide a brand-new model for designing novel targeted drug delivery systems.