Cooperative Amplification-Based Electrochemical Sensor for the Zeptomole Detection of Nucleic Acids

Wide-range and selective detection of SARS-CoV-2 DNA via surface modification of electrolyte-gated IGZO thin-film transistors

The 2019 coronavirus pandemic resulted in a massive global healthcare crisis, highlighting the necessity to develop effective and reproducible platforms capable of rapidly and accurately detecting SARS-CoV-2. In this study, we developed an electrolyte-gated indium-gallium-zinc-oxide (IGZO) thin-film transistor with sequential surface modification to realize the low limit of detection (LoD <50 fM) and a wide detection range from 50 fM to 5 μM with good linearity (R2 = 0.9965), and recyclability. The surface chemical modification was achieved to anchor the single strand of SARS-CoV-2 DNA via selective hybridization. Moreover, the minute electrical signal change following the chemical modification was investigated by in-depth physicochemical analytical techniques. Finally, we demonstrate fully recyclable biosensors based on oxygen plasma treatment. Owing to its cost-effective fabrication, rapid detection at the single-molecule level, and low detection limit, the proposed biosensor can be used as a point-of-care platform to perform timely and effective SARS-CoV-2 detection.

An enzyme-responsive electrochemical DNA biosensor achieving various dynamic range by using only-one immobilization probe

Developing a simple and easy-to-operate biosensor with tunable dynamic range would provide enormous opportunities to promote the diagnostic applications. Herein, an enzyme-responsive electrochemical DNA biosensor is developed by using only-one immobilization probe. The immobilization probe was designed with a two-loop hairpin-like structure that contained the mutually independent target recognition and enzyme (EcoRI restriction endonuclease) responsive domains. The target recognition was based on a toehold-mediated strand displacement reaction strategy. The toehold region was initially caged in the loop of the immobilization probe and showed a relatively low binding affinity with target, which was improved via EcoRI cleavage of immobilization probe to liberate the toehold region. The EcoRI cleavage operation for immobilization probe demonstrated the well regulation ability in detection performance. It showed a largely extended dynamic range, a significantly lowered detection limit and better discrimination ability toward the mismatched sequences whether in two buffers (with high or low salt concentrations) or in the serum system. The advantages also includes simplicity in probe design, and facile biosensor fabrication and operation. It thus opens a new avenue for the development of the modulated DNA biosensor and hold a great potential for the diagnostic applications and drug monitoring.

Biocomputing label-free security system based on homogenous ligation chain reaction-induced dramatic change in melting temperature for screening single nucleotide polymorphisms

The development of smart platform with accurate, inexpensive and reliable detection of single-nucleotide polymorphisms (SNPs) has long been concerned in the fields of medical diagnosis and basic research. Here, we present a ligation chain reaction (LCR)-based sensing system for the cost-effective screening of SNPs by simply conducting DNA melting analysis. No chemical modification is required and the signaling operation is accomplished in homogeneous solution, circumventing the complex modification process and possibly compromised enzymatic activity associated with heterogeneous materials, such as quantum dot (QD) and gold nanoparticle (GNP). Due to the enzymatic catalysis and high fidelity of ligase, the system is capable of executing signal amplification, providing a high sensitivity and selectivity. KRAS gene is easily recognized and the site-specific mutation of guanine (G) to adenine (A), thymine (T) or cytosine (C) is accurately screened. Moreover, the excellent reliability was demonstrated by blind test and recovery test. LCR-based signaling mechanism was further used to develop the biocomputing security system, and two logic gates consisting of four single-stranded DNAs (ssDNAs) offer a double insurance to protect the information against illegal invasion, guaranteeing the reliability of output information. Once in the absence of one essential factor, the security system was always locked regardless of target key, serving as a novel strategy to ensure the safety of output information at molecular level. As a proof-of-concept scheme, this contribution introduces new insight into the development of DNA security systems and the exploitation of powerful signal transduction strategy suitable for rapid and convenient disease diagnosis.

Ultrasensitive analysis of microRNAs with gold nanoparticle-decorated molybdenum disulfide nanohybrid-based multilayer nanoprobes

The nanoprobe-based signal amplification strategy is a powerful way to ultrasensitively detect biomolecules. Herein, a gold nanoparticle-decorated molybdenum disulfide (MoS₂-AuNP)-based multilayer nanoprobe (MLNP) was designed for ultrasensitive analysis of microRNA-21 (miRNA-21). The MLNP-amplified electrochemical biosensor exhibited an ultrawide dynamic range (10 aM-1 μM) and an ultralow detection limit (38 aM) for target miRNA-21 analysis. Furthermore, this biosensor can determine miRNA-21 expression in cell lysates of 100 human cervical cancer (HeLa) cells. Our results demonstrate that MoS₂-AuNP nanocomposites have great potential in constructing biosensors for target molecule analysis.

Label-free amplified fluorescence detection of DNA biomarkers based on KFP polymerase-driven double strand displacement reactions and magnetic nanoprobes

Developing a sensitive, low-cost and general sensing platform for the analysis of a DNA biomarker and its mutation is important for early cancer screening. In our work, the tumor suppressor gene-p53 DNA was chosen as the model DNA biomarker due to its vital role in preventing oncogene cancer-inhibiting activity through mediating cellular proliferation and apoptosis. Compared with tumor biopsy, the quantification of p53 DNA and its mutation in biofluids (such as urine) is more convenient due to its simple operation and non-invasiveness. Herein, a label-free amplified fluorescence assay has been developed for p53 DNA in urine samples through the KFP polymerase-driven double strand displacement reactions and a magnetic nanoprobe. First, the ssDNA probe (RP) was designed with antisense sequences for p53 DNA and the Nb.BbvCI endonuclease recognition site. In the presence of p53 DNA, the formed dsDNA between RP and p53 DNA served as an engaging primer to initiate the first strand displacement reaction (SDA) under the action of KFP DNA polymerase and Nb.BbvCI, generating abundant short ssDNA (primer). Subsequently, the resulting primers will initiate the downstream SDA through the primer-hairpin DNA (HPa) binding, opening up, and extension of HPb and HPc under the action of KFP DNA polymerase. In the process of this final DNA polymerization reaction, the primer hybridized on HPa is released and goes on to initiate another round, forming plenty of duplex Y-shaped DNA. With the integration of SYBR Green I (SG I) into these duplex DNA, the amplified label-free fluorescence detection platform for p53 DNA can be achieved. Moreover, a biotin modified nanoprobe (bio-CP) was used to capture the superfluous HP. By performing the separation function, the binding of superfluous HP and SG could be avoided and a low background can be acquired. Benefiting from the abundant SG intercalation sites of Y-shaped DNA and low background signals, this method showed excellent sensitivity with a detection limit of 0.012 nM, and the p53 DNA in urine samples was evaluated, offering a powerful tool for biomedical research and clinical diagnosis.

Intracellular Delivery and Sensing System Based on Electroplated Conductive Nanostraw Arrays

One-dimensional nanoneedle-like arrays have emerged as an attractive tool for penetrating the cell membrane to achieve intracellular applications including drug delivery, electrical recording, and biochemical detection. Hollow nanoneedles, also called nanostraws (NSs), combined with nanoelectroporation have been demonstrated as a powerful platform for intracellular drug delivery and extraction of intracellular contents. However, the fabrication technique of nanostraws still requires complicated and expensive atomic layer deposition and etching processes and fails to produce conductive nanostraws. Herein, we developed a commonly accessible and versatile electrodeposition approach to controllably fabricate conductive nanostraw arrays based on various types of metal or conductive polymer materials. Representatively, Pt nanostraws (Pt NSs) with 400 nm diameter were further integrated with a low-voltage nanoelectroporation system to achieve cell detection, intracellular drug delivery, and sensing of intracellular enzymes. Both theoretical simulations and experimental results revealed that the conductive nanostraws in direct contact with cells could induce high-efficiency cell electroporation at relatively low voltage (∼5 V). Efficient delivery of reagents into live cells with spatial control and repeated extraction of intracellular enzymes (e.g., caspase-3) for temporal monitoring from the same set of cells were demonstrated. This work not only pioneers a new avenue for universal production of conductive nanostraws on a large scale but also presents great potential for developing nanodevices to achieve a variety of biomedical applications including cell re-engineering, cell-based therapy, and signaling pathway monitoring.

A Polyamidoamine Dendrimer-Based Electrochemical Immunosensor for Label-Free Determination of Epithelial Cell Adhesion Molecule- Expressing Cancer Cells

A new electrochemical immunosensor for cancer cell detection based on a specific interaction between the metastasis-related antigen of epithelial cell adhesion molecule (EpCAM) on the cell membrane and its monoclonal antibody (Anti-EpCAM) immobilized on a gold electrode has been developed. The amino-terminated polyamidoamine dendrimer (G6 PAMAM) was first covalently attached to the 3-mercaptopropionic acid (MPA)-functionalized gold electrode to obtain a thin film, and then completely carboxylated by succinic anhydride (SA). Next, the Anti-EpCAM was covalently bound with the G6 PAMAM to obtain a stable recognition layer. In the presence of the EpCAM expressing hepatocellular carcinomas cell line of HepG2, the specific immune recognition (Anti-EpCAM/EpCAM) led to an obvious change of the electron transfer ability. The properties of the layer-by-layer assembly process was examined by cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). The final determination of HepG2 cells was performed in the presence of the reversible [Fe(CN)₆]^3−/4− redox couple using impedance technique. Based on the advantages of PAMAM nanomaterial and immune reaction, a linear response to HepG2 cells ranging from 1 × 10⁴ to 1 × 10⁶ cells mL⁻¹ with a calculated detection limit of 2.1 × 10³ cells mL⁻¹ was obtained. We expect this method can provide a potential tool for cancer cell monitoring and protein expression analysis.

Combining magnetic nanoparticle capture and poly-enzyme nanobead amplification for ultrasensitive detection and discrimination of DNA single nucleotide polymorphisms

The development of ultrasensitive methods for detecting specific genes and discriminating single nucleotide polymorphisms (SNPs) is important for biomedical research and clinical disease diagnosis. Herein, we report an ultrasensitive approach for label-free detection and discrimination of a full-match target-DNA from its cancer related SNPs by combining magnetic nanoparticle (MNP) capture and poly-enzyme nanobead signal amplification. It uses a MNP linked capture-DNA and a biotinylated signal-DNA to sandwich the target followed by ligation to offer high SNP discrimination: only the perfect-match target-DNA yields a covalently linked biotinylated signal-DNA on the MNP surface for subsequent binding to a neutravidin-horseradish peroxidase conjugate (NAV-HRP) for signal amplification. The use of polymer nanobeads each tagged with thousands of copies of HRPs greatly improves the signal amplification power, allowing for direct, amplification-free quantification of low aM target-DNA over 6 orders of magnitude (0.001-1000 fM). Moreover, this sensor also offers excellent discrimination between the perfect-match gene and its cancer-related SNPs and can positively detect 1 fM perfect-match target-DNA in the presence of 100 fold excess of co-existing single-base mismatch targets. Furthermore, it works robustly in clinically relevant media (e.g. 10% human serum) and gives even higher SNP discrimination than that in clean buffers. This ultrasensitive DNA sensor appears to have excellent potential for rapid detection and diagnosis of genetic diseases.

A signal amplification system constructed by bi-enzymes and bi-nanospheres for sensitive detection of norepinephrine and miRNA

Achieving the enhanced sensitivity and stability is always the pursuit for the fabrication of enzymatic biosensors. However, their sensitivity was still restricted by the fluctuant detection target (e.g. concentration), complex detection environment and limited recognition capability of enzymes. Herein, an effective and facile approach was designed to construct a bi-enzymatic and bi-nanospherical signal amplification system for fabrication of biosensors based on the designed polydopamine(PDA)-laccase@Au-glucose dehydrogenase. Therein, laccase-catalytic polymerized PDA nanoparticles (NPs) provided the supporting matrix for immobilization of laccase and AuNPs. The AuNPs with good conductivity and large surface area were used not only as a platform for enhanced loading capacity of glucose dehydrogenase but also as a conducting medium for electron transfer acceleration between enzymes and electrode. Moreover, the coordinated catalysis of bi-enzymes (laccase and glucose dehydrogenase) could avoid the fluctuated concentration of detection target (e.g. norepinephrine), while the application of bi-nanospheres loaded with large amount of enzymes could effectively amplify the signal of biosensors. Taking advantages of these merits, the as-prepared biosensors showed preeminent reproducibility, larger detection range from 0.5 nM to 0.5 μM, and lower detection limit of 0.07 nM (S/N = 3) for the norepinephrine detection. Besides, the constructed PDA-laccase@Au-glucose dehydrogenase was also successfully applied as the sensing probes for the detection of microRNA (miRNA), especially for single-nucleotide mismatched miRNA via specific recognition.

Comparison of Different Strategies for the Development of Highly Sensitive Electrochemical Nucleic Acid Biosensors Using Neither Nanomaterials nor Nucleic Acid Amplification

Currently, electrochemical nucleic acid-based biosensing methodologies involving hybridization assays, specific recognition of RNA/DNA and RNA/RNA duplexes, and amplification systems provide an attractive alternative to conventional quantification strategies for the routine determination of relevant nucleic acids at different settings. A particularly relevant objective in the development of such nucleic acid biosensors is the design of as many as possible affordable, quick, and simple methods while keeping the required sensitivity. With this aim in mind, this work reports, for the first time, a thorough comparison between 11 methodologies that involve different assay formats and labeling strategies for targeting the same DNA. The assayed approaches use conventional sandwich and competitive hybridization assays, direct hybridization coupled to bioreceptors with affinity for RNA/DNA duplexes, multienzyme labeling bioreagents, and DNA concatamers. All of them have been implemented on the surface of magnetic beads (MBs) and involve amperometric transduction at screen-printed carbon electrodes (SPCEs). The influence of the formed duplex length and of the labeling strategy have also been evaluated. Results demonstrate that these strategies can provide very sensitive methods without the need for using nanomaterials or polymerase chain reaction (PCR). In addition, the sensitivity can be tailored within several orders of magnitude simply by varying the bioassay format, hybrid length or labeling strategy. This comparative study allowed us to conclude that the use of strategies involving longer hybrids, the use of antibodies with specificity for RNA/DNA heteroduplexes and labeling with bacterial antibody binding proteins conjugated with multiple enzyme molecules, provides the best sensitivity.

Ratiometric electrochemical assay for sensitive detecting microRNA based on dual-amplification mechanism of duplex-specific nuclease and hybridization chain reaction

We propose a ratiometric electrochemical assay for detecting microRNA (miRNA) on the basis of dual-amplification mechanism by using distinguishable electrochemical signals from thionine (Thi) and ferrocene (Fc). The thiol-modified and ferrocene-labeled hairpin capture probes (CP) are first immobilized on an Au electrode via Au-S reaction. The target miRNA hybridizes with CP and unfolding the hairpin structure of CP to form miRNA-DNA duplexes. Then, kamchatka crab duplex specific nuclease (DSN) specifically cleaves the DNA in miRNA-DNA duplexes, leading to the release of miRNA and another cleaves cycle, meanwhile, numerous Fc leaves away from the electrode surface and leads to the signal-off of Fc. The residual fragment on electrode surface acts as a HCR primer to form dsDNA polymers through in situ HCR with the presence of the primer and two probes (HDNA and HDNA'), resulting in the capture of numerous DNA/Au NPs/Thi and the signal-on of Thi. The dual-amplification mechanism significantly amplifies the decrease of Fc signal and the increase of Thi signal for ratiometric readout (I_Thi/I_Fc), thus providing a sensitive method for the selective detection of miR-141 with a detection limit down to 11aM. The dual-signal ratiometric outputs have an intrinsic self-calibration to the effects from system, which is promising to be applied in biosensing and clinical diagnosis.

Simultaneous Enhancement of Bioactivity and Stability of Laccase by Cu2+/PAA/PPEGA Matrix for Efficient Biosensing and Recyclable Decontamination of Pyrocatechol

Simultaneously enhancing the catalytic bioactivity and stability of enzyme is still an intractable issue in the enzymatic study. Herein, a facile and effective approach was designed to immobilize and modify laccase on a Cu²⁺-adsorbed pyrene-terminated block copolymer [poly(acrylic acid)/poly(poly(ethylene glycol) acrylate)] (PAA/PPEGA), which was prepared via well-controlled reversible addition-fragmentation chain transfer polymerization. PAA provided the supporting matrix for firm immobilization of Cu²⁺, an enzyme bioactivity inducer, onto the microstructure of laccase, while avoiding any contamination of the heavy metal Cu²⁺ into the following application system. The water-soluble, biocompatible, and nontoxic PPEGA was used as an ideal modifier to improve the laccase stability. Accordingly, the modified laccase exhibited enhanced catalytic bioactivity and stability simultaneously to 447% and 237%, respectively. The modified laccase was immobilized on the highly oriented pyrolytic graphite surface and large-area graphene papers through π-π stacking interactions between the pyrene moiety of PAA/PPEGA and the π-conjugated graphenelike surface. The as-prepared portable solid-state electrochemical laccase biosensor showed lowest detection limit of 50 nM (S/N ≥ 3) and long-term stability for pyrocatechol detection. Besides, the laccase immobilization on graphene paper provided efficient pyrocatechol decontamination platform with convenience and recyclability, which could retain the laccase bioactivity of 176% after 8 consecutive operations.

Collapse of chain anadiplosis-structured DNA nanowires for highly sensitive colorimetric assay of nucleic acids

In this work, we have proposed a chain anadiplosis-structured DNA nanowire by using two well-defined assembly strands (AS1 and AS2).

Sensitive and selective detection of the p53 gene based on a triple-helix magnetic probe coupled to a fluorescent liposome hybridization assembly via rolling circle amplification

Developing a sensitive and selective sensing platform for the p53 gene and its mutation analysis is essential and may aid in early cancer screening and assessment of prognosis.

Label-free colorimetric detection of cancer related gene based on two-step amplification of molecular machine

Highly sensitive detection of K-ras gene is of great significance in biomedical research and clinical diagnosis. Here, we developed a colorimetric biosensing system for the detection of proto-oncogene K-ras based on enhanced amplification effect of DNA molecular machine, where dual isothermal circular strand-displacement amplification (D-SDA) occurs on two arms in one-to-one correspondence. Specifically, we designed a primer-locked hairpin probe (HP) and a primer-contained linear polymerization template (PPT). In the presence of target gene, HP can hybridize with PPT, forming a DNA molecular machine with dual functional arms (called DFA-machine). Each of the two probes in this machine is able to be extended by polymerase on its counterpart species. Moreover, with the help of nicking endonuclease, the dual isothermal polymerization is converted into dual circular strand-displacement amplification, generating a large amount of anti-hemin aptamer-contained products. After binding to hemins, the aptamer/hemin duplex, horseradish peroxidase (HRP)-mimicking DNAzyme, was formed and catalyzed the oxidation of colorless ABTS by H₂O₂, producing a visible green color. The proposed colorimetric assay exhibits a wide linear range from 0.01 to 150nM with a low detection limit of 10pM. More interestingly, the mutations existing in target gene are easily observed by the naked eye. It should be noted that this colorimetric system was proved by the analysis of K-ras gene of SW620 cell lines. The simple and powerful DFA-machine is expected to provide promising potential in the sensitive detection of biomarkers for cancer diagnosis, prognosis and therapy.

Conformational Changes of Enzymes and Aptamers Immobilized on Electrodes

Conformation constitutes a vital property of biomolecules, especially in the cases of enzymes and aptamers, and is essential in defining their molecular recognition ability. When biomolecules are immobilized on electrode surfaces, it is very important to have a control on all the possible conformational changes that may occur, either upon the recognition of their targets or by undesired alterations. Both enzymes and aptamers immobilized on electrodes are susceptible to conformational changes as a response to the nature of the charge of the surface and of the surrounding environment (pH, temperature, ionic strength, etc.). The main goal of this review is to analyze how the conformational changes of enzymes and aptamers immobilized on electrode surfaces have been treated in reports on biosensors and biofuel cells. This topic was selected due to insufficient information found on the actual conformational changes involved in the function of these bioelectrochemical devices despite its importance.

Double-stranded probe modified AuNPs for sensitive and selective detection of microRNA 30a in solution and live cell

In this article, we reported a double-stranded DNA probe modified gold nanoparticle used as both “nano-flares” and transfection agents to quantify miR-30a in solution and visualize in live cells.

Lable-free quadruple signal amplification strategy for sensitive electrochemical p53 gene biosensing

A versatile label-free quadruple signal amplification biosensing platform for p53 gene (target DNA) detection was proposed. The chitosan-graphene (CS-GR) modified electrode with excellent electron transfer ability could provide a large specific surface for high levels of AuNPs-DNA attachment. The large amount of AuNPs could immobilize more capture probes and enhance the electrochemical signal with the excellent electrocatalytic activity. Furthermore, with the assist of N.BstNB I (the nicking endonuclease), target DNA could be reused and more G-quadruplex-hemin DNAzyme could be formed, allowing significant signal amplification in the presence of H2O2. Such strategy can enhance the oxidation-reduction reaction of adsorbed methylene blue (MB) and efficiently improve the sensitivity of the proposed biosensor. The morphologies of materials and the stepwise biosensor were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM) and cyclic voltammetry (CV). Differential pulse voltammetry (DPV) signals of MB provided quantitative measures of the concentrations of target DNA, with a linear calibration range of 1.0 × 10(-15)-1.0 × 10(-9)M and a detection limit of 3.0 × 10(-16)M. Moreover, the resulting biosensor also exhibited good specificity, acceptable reproducibility and stability, indicating that the present strategy was promising for broad potential application in clinic assay.

Application of nanomaterials in the bioanalytical detection of disease-related genes

In the diagnosis of genetic diseases and disorders, nanomaterials-based gene detection systems have significant advantages over conventional diagnostic systems in terms of simplicity, sensitivity, specificity, and portability. In this review, we describe the application of nanomaterials for disease-related genes detection in different methods excluding PCR-related method, such as colorimetry, fluorescence-based methods, electrochemistry, microarray methods, surface-enhanced Raman spectroscopy (SERS), quartz crystal microbalance (QCM) methods, and dynamic light scattering (DLS). The most commonly used nanomaterials are gold, silver, carbon and semiconducting nanoparticles. Various nanomaterials-based gene detection methods are introduced, their respective advantages are discussed, and selected examples are provided to illustrate the properties of these nanomaterials and their emerging applications for the detection of specific nucleic acid sequences.

A sandwich-hybridization assay for simultaneous determination of HIV and tuberculosis DNA targets based on signal amplification by quantum dots-PowerVision™ polymer coding nanotracers

A novel sandwich-hybridization assay for simultaneous electrochemical detection of multiple DNA targets related to human immune deficiency virus (HIV) and tuberculosis (TB) was developed based on the different quantum dots-PowerVision(TM) polymer nanotracers. The polymer nanotracers were respectively fabricated by immobilizing SH-labeled oligonucleotides (s-HIV or s-TB), which can partially hybrid with virus DNA (HIV or TB), on gold nanoparticles (Au NPs) and then modified with PowerVision(TM) (PV) polymer-encapsulated quantum dots (CdS or PbS) as signal tags. PV is a dendrimer enzyme linked polymer, which can immobilize abundant QDs to amplify the stripping voltammetry signals from the metal ions (Pb or Cd). The capture probes were prepared through the immobilization of SH-labeled oligonucleotides, which can complementary with HIV and TB DNA, on the magnetic Fe3O4@Au (GMPs) beads. After sandwich-hybridization, the polymer nanotracers together with HIV and TB DNA targets were simultaneously introduced onto the surface of GMPs. Then the two encoding metal ions (Cd(2+) and Pb(2+)) were used to differentiate two viruses DNA due to the different subsequent anodic stripping voltammetric peaks at -0.84 V (Cd) and -0.61 V (Pb). Because of the excellent signal amplification of the polymer nanotracers and the great specificity of DNA targets, this assay could detect targets DNA as low as 0.2 femtomolar and exhibited excellent selectivity with the dynamitic range from 0.5 fM to 500 pM. Those results demonstrated that this electrochemical coding assay has great potential in applications for screening more viruses DNA while changing the probes.

A new mode for highly sensitive and specific detection of DNA based on exonuclease III-assisted target recycling amplification and mismatched catalytic hairpin assembly

Schematic representation of the designed strategy for target DNA detection.

An electrochemical sensing strategy for the detection of the hepatitis B virus sequence with homogenous hybridization based on host–guest recognition

Schematic for electrochemically sensing DNA with hybridization in homogeneous solutionviahost–guest recognition based on MNPs/β-CD.

Highly sensitive fluorescence detection of target DNA by coupling exonuclease-assisted cascade target recycling and DNAzyme amplification

Because of the intrinsic importance of nucleic acid as bio-targets, the simple and sensitive detection of nucleic acid is very essential for biological studies and medical diagnostics. Herein, a simple, isothermal and highly sensitive fluorescence detection of target DNA was developed with the combination of exonuclease III (Exo III)-assisted cascade target recycling and DNAzyme amplification. A hairpin DNA probe was designed, which contained the 3'-protruding DNA fragment as target recognition unit, the caged DNA fragment in the stem region as target analogue, and the caged 8-17 DNAzyme sequence in the loop region as signal response unit. Upon sensing of target DNA, the 3'-strand of hairpin DNA probe could be stepwise removed by Exo III, accompanied by the releasing of target DNA and autonomous generation of new target analogues for the successive hybridization and cleavage process. Simultaneously, the 8-17 DNAzyme unit could be exponentially released from this hairpin DNA probe and activated for the cyclic cleavage toward the ribonucleotide-containing molecular beacon substrate, inducing a remarkable fluorescence signal amplification for target detection. A low detection limit of 20 fM with an excellent selectivity toward target DNA could be achieved. The developed cascade amplification strategy may be further extended for the detection of a wide spectrum of analytes including protein and biological small molecules by combining DNA aptamer technology.

Enzyme-free and label-free ultrasensitive electrochemical detection of DNA and adenosine triphosphate by dendritic DNA concatamer-based signal amplification

Hybridization chain reaction (HCR) strategy has been well developed for the fabrication of various biosensing platforms for signal amplification. Herein, a novel enzyme-free and label-free ultrasensitive electrochemical DNA biosensing platform for the detection of target DNA and adenosine triphosphate (ATP) was firstly proposed, in which three auxiliary DNA probes were ingeniously designed to construct the dendritic DNA concatamer via HCR strategy and used as hexaammineruthenium(III) chloride (RuHex) carrier for signal amplification. With the developed dendritic DNA concatamer-based signal amplification strategy, the DNA biosensor could achieve an ultrasensitive electrochemical detection of DNA and ATP with a superior detection limit as low as 5 aM and 20 fM, respectively, and also demonstrate a high selectivity for DNA and ATP detection. The currently proposed dendritic DNA concatamer opens a promising direction to construct ultrasensitive DNA biosensing platform for biomolecular detection in bioanalysis and clinical biomedicine, which offers the distinct advantages of simplicity and cost efficiency owing to no need of any kind of enzyme, chemical modification or labeling.