Exploiting the higher specificity of silver amalgamation: selective detection of mercury(II) by forming Ag/Hg amalgam

Role of silver nanoparticles and silver nanoclusters for the detection and removal of Hg(ii)

Silver metal, being a 3d transition metal in group 11 in the periodic table, is widely used in material science for its distinguished plasmonic properties. Nanoparticles (NPs) and nanoclusters (NCs) are widely used in sensing applications having a surface plasmon band and emissive properties, respectively. Mercury is one of the detrimental toxins and threats to various ecosystems. The distinction between nanoparticles and nanoclusters, the utility and toxicity of heavy metal mercury, fluorometric and colorimetric approaches to the recognition of mercury ions with NPs and NCs, the mechanism of detection, spot detection, and natural water sample analyses were illustrated in detail in this review article. Moreover, the sensing platform and analyte (Hg2+) fate were described for substantiating the mechanism. It was observed that NCs are mostly utilized for fluorometric approaches, while NPs are mostly employed for colorimetric approaches. Fluorometric detection is mainly quenching-based. However, sensing with enhancement was found in a few reports. Adulteration of other metals with silver particles often modifies the sensing platform.

Directed Assembly of Au Nanostar@Ag Satellite Nanostructures for SERS-Based Sensing of Hg2+ Ions

Embedding Raman reporters within nanosized gaps of metallic nanoparticles is an attractive route for surface-enhanced Raman spectroscopy (SERS) applications, although often this involves complex synthesis procedures that limit their practical use. Herein, we present the tip-selective direct growth of silver satellites surrounding gold nanostars (AuNSt@AgSAT), mediated by a dithiol Raman reporter 1,4-benzenedithiol (BDT). We propose that BDT is embedded within nanogaps which form between the AuNSt tips and the satellites, and plays a key role in mediating the satellite growth. Not only proposing a rationale for the mechanistic growth of the AuNSt@AgSAT, we also demonstrate an example for its use for the detection of Hg²⁺ ions in water. The presence of Hg²⁺ resulted in amalgamation of the AuNSt@AgSAT, which altered both its structural morphology and Raman enhancement properties. This provides a basis for the detection where the Raman intensity of BDT is inversely proportional to the Hg²⁺ concentrations. As a result, Hg²⁺ could be detected at concentrations as low as 0.1 ppb. This paper not only provides important mechanistic insight into the tip-selective direct growth of the anisotropic nanostructure but also proposes its excellent Raman enhancement capability for bioimaging as well as biological and chemical sensing applications.

A robust luminescent assay for screening alkyladenine DNA glycosylase inhibitors to overcome DNA repair and temozolomide drug resistance

Temozolomide (TMZ) is an anticancer agent used to treat glioblastoma, typically following radiation therapy and/or surgical resection. However, despite its effectiveness, at least 50% of patients do not respond to TMZ, which is associated with repair and/or tolerance of TMZ-induced DNA lesions. Studies have demonstrated that alkyladenine DNA glycosylase (AAG), an enzyme that triggers the base excision repair (BER) pathway by excising TMZ-induced N3-methyladenine (3meA) and N7-methylguanine lesions, is overexpressed in glioblastoma tissues compared to normal tissues. Therefore, it is essential to develop a rapid and efficient screening method for AAG inhibitors to overcome TMZ resistance in glioblastomas. Herein, we report a robust time-resolved photoluminescence platform for identifying AAG inhibitors with improved sensitivity compared to conventional steady-state spectroscopic methods. As a proof-of-concept, this assay was used to screen 1440 food and drug administration-approved drugs against AAG, resulting in the repurposing of sunitinib as a potential AAG inhibitor. Sunitinib restored glioblastoma (GBM) cancer cell sensitivity to TMZ, inhibited GBM cell proliferation and stem cell characteristics, and induced GBM cell cycle arrest. Overall, this strategy offers a new method for the rapid identification of small-molecule inhibitors of BER enzyme activities that can prevent false negatives due to a fluorescent background.

Optically trapped SiO2@Au particle-dye hybrid-based SERS detection of Hg2+ ions

The selective ultra-sensitive detection of a very low concentration of analyte in a liquid environment using surface-enhanced Raman spectroscopy (SERS) is a challenging task owing to the poor reproducibility of the Raman signals arising from the nonstationary nature of the substrate. However, plasmonic metal particle-incorporated microparticles can be effectively 3-D arrested in a liquid environment that can serve as a stable SERS substrate by employing an optical trapping force. Herein, we demonstrate a 3-D optically trapped Au-attached SiO₂ microparticle as an efficient SERS substrate that can detect 512 pM for Rhodamine6G and 6.8 pM for crystal violet. Further, the substrate allows the simultaneous detection of multiple analytes. By utilizing the Raman signal from Rhodamine 6G as the probe beam, the selective detection of Hg²⁺ ions as low as 100 pM is demonstrated.

Amine-Functionalized Silane-Assisted Preparation of AgNP-Deposited α-Ni(OH)2 Composite Materials and Their Application in Hg2+ Ion Sensing

A facile synthetic methodology for the deposition of different concentrations of Ag nanoparticles (AgNPs) on α-Ni(OH)₂ sheets (α-Ni₁(OH)₂-Ag_0.5, α-Ni₁(OH)₂-Ag₁, α-Ni₁(OH)₂-Ag₂, and α-Ni₁(OH)₂-Ag₃) is reported using N-[3-(trimethoxysilyl)propyl]diethylenetriamine (TPDT) silane. The TPDT aminosilane facilitates the formation of α-Ni(OH)₂ sheets and reduces the Ag⁺ precursor to AgNPs, leading to the deposition of AgNPs on α-Ni(OH)₂ sheets. UV-vis absorption spectroscopy, transmission microscopy analyses, X-ray photoelectron spectroscopy, X-ray diffraction, and attenuated total reflectance-Fourier transform infrared spectroscopy techniques were used to characterize the prepared α-Ni₁(OH)₂-Ag_0.5-3 composite materials. High-angle annular dark-field scanning transmission electron microscopy-energy-dispersive X-ray spectroscopy mapping images and scanning electron microscopy-energy-dispersive X-ray spectroscopy mapping images were recorded to understand the α-Ni₁(OH)₂-Ag composite sheet materials. The optical sensing property of α-Ni₁(OH)₂-Ag_0.5-3 composite materials toward toxic Hg²⁺ ions were investigated using a UV-vis absorption spectroscopy technique. The α-Ni₁(OH)₂-Ag₂ composite material showed selective sensing behavior.

A Highly Selective and Sensitive Nano-Silver sol Sensor for Hg2+ and Fe3+: Green Preparation and Mechanism

The development of highly selective and highly sensitive nanometer colorimetric chemical sensors is an urgent requirement in the immediate detection of heavy metal ions. In this work, silver-nanoparticle (Ag NPs)-based chemosensors were prepared by a simple and green method, in which the silver nitrate, carboxymethyl cellulose sodium (CMS) and Polyvinylpyrrolidone (PVP), and glucose are used as the silver source, double stabilizer and green reductant, respectively. The obtained colloidal CMS/PVP-Ag NPs showed a high dispersibility and stability, and creating a high selectivity and sensitivity to detect Hg2+ and Fe3+ with remarkable and rapid color variation. Low limits of detection (LOD) of 7.1 nM (0–20 μM) and 15.2 nM (20–100 μM) for Hg2+ and 3.6 nM for Fe3+ were achieved. More importantly, the CMS/PVP-Ag NPs has a high sensitivity even in a complex system with multiple heavy ions, the result of the practical ability to detect Hg2+ and Fe3+ in tap water and seawater reached a rational range of 98.33~104.2% (Hg2+) and 98.85~104.80% (Fe3+), indicating the great potential of the as-prepared nanocomposites colorimetric chemosensor for practical applications.

Natural and Engineered Nanomaterials for the Identification of Heavy Metal Ions—A Review

In recent years, there has been much interest in developing advanced and innovative approaches for sensing applications in various fields, including agriculture and environmental remediation. The development of novel sensors for detecting heavy metals using nanomaterials has emerged as a rapidly developing research area due to its high availability and sustainability. This review emphasized the naturally derived and engineered nanomaterials that have the potential to be applied as sensing reagents to interact with metal ions or as reducing and stabilizing agents to synthesize metallic nanoparticles for the detection of heavy metal ions. This review also focused on the recent advancement of nanotechnology-based detection methods using naturally derived and engineered materials, with a summary of their sensitivity and selectivity towards heavy metals. This review paper covers the pros and cons of sensing applications with recent research published from 2015 to 2022.

In silico modeling of the antagonistic effect of mercuric chloride and silver nanoparticles on the mortality rate of zebrafish (Danio rerio) based on response surface methodology

In this study, in silico modeling was designed to examine the antagonistic effect of mercuric chloride (HgCl₂) and silver nanoparticles (AgNPs) on the mortality rate of zebrafish (Danio rerio) based on response surface methodology (RSM). Adult zebrafish (Danio rerio) with an average weight of 0.75 ± 0.16 g were used in this study. An interaction between HgCl₂ and AgNPs was evaluated using DLS, TEM, and EDX mapping. In addition, RSM was applied to determine and predict the mortality rate of zebrafish induced by HgCl₂ in the presence of non-lethal concentrations of AgNPs and to optimize dependent and independent variables. Following exposure to HgCl₂, in vitro observations showed an increase in the hydrodynamic size of AgNPs and the formation of irregular nanoparticles. EDX mapping analysis also demonstrated the deposition of Hg ions on the surface of AgNPs, indicating the interaction between HgCl₂ and AgNPs (i.e., the amalgamation of Hg and AgNPs). Moreover, in silico and in vivo findings illustrated that the mortality rate of zebrafish increased significantly in a concentration-dependent manner; however, the mortality rate reduced greatly in the presence of AgNPs during 96-h exposure. Statistically significant correlation and regression were also observed for the mortality rate between the actual and predicted values based on the ANOVA results, showing that the proposed model fits well. The most critical conditions of mortality rate were occurred by HgCl₂ concentration of 0.23 mg L^-1 and AgNP concentration of 0.04 mg L^-1 that yielding maximum fish mortality rate of 96.541%. Additionally, the obtained value for model desirability was equal to 1.000 (i.e., the highest possible value). In conclusion, this statistical model could accurately describe the relationship between independent and dependent variables, and consequently boost substantially the experimental design of ecotoxicological studies by reducing the number of model organisms, toxic and chemical substances, time, and budget.

Utilization of the peroxidase-like activity of silver nanoparticles nanozyme on O-phenylenediamine/H2O2 system for fluorescence detection of mercury (II) ions

Polyvinylpyrrolidone stabilized silver nanoparticles (PV-AgNPs) were synthesized from AgNO₃/trisodium citrate and with the assistance of microwave energy. The synthesized PV-AgNPs were found to own an actual peroxidase mimicking activity. This catalytic activity can oxidize the non-fluorescence reagent (o-phenylenediamine) to a high fluorescence reaction product (2,3-diaminophenazine). The reaction product exhibited a fluorescence emission at 563 nm upon the excitation at 420. Among many metals, only mercury (II) ions can inhibit the catalytic activity of PV-AgNPs nanozyme. Accordingly, the fluorescence intensity of the reaction product has been successfully quenched. This quenching effect in the fluorescence intensity was directly proportional to the concentration of mercury (II). Depending on this finding, a simple, cost-effective, and selective spectrofluorimetric approach has been designed for mercury (II) detection in water samples. The linear relationship between the inhibition in fluorescence intensity and mercury (II) concentration was found in 20–2000 nM with a detection limit of 8.9 nM.

Single-Particle Study on Hg Amalgamation Mechanism and Slow Inward Diffusion in Mesoporous Silica-Coated Gold Nanorods without Structural Deformation

This paper presents the structural and spectral variations of individual mesoporous silica-coated gold nanorods (AuNRs@mSiO₂) compared to bare AuNRs upon Hg-Au amalgamation. First, the aspect ratio of AuNRs@mSiO₂ exposed to Hg solutions was unchanged because the deformation related to the cores of AuNR was suppressed by the silica shell. Second, dark-field microscopy and spectroscopy revealed a blue shift of the localized surface plasmon resonance (LSPR) wavelength peak and strong plasmon damping in the individual AuNRs@mSiO₂ scattering spectra, exposed to Hg solutions. Furthermore, we investigated time-dependent adsorption kinetics and spectral changes during the formation of Au-Hg amalgam in single AuNRs@mSiO₂ over a long time frame without any disturbance from the structural deformation. The inward Hg diffusion into the AuNR core caused a gradual red shift and line width narrowing of the LSPR peak when AuNRs@mSiO₂ were withdrawn from Hg solution. Thus, this paper provides new insights into the relationship among amalgamation process, morphological change, the role of silica shell, Hg inward diffusion, LSPR peak, and line width at the single-particle level.

Catalytic oxidation of O-phenylenediamine by silver nanoparticles for resonance Rayleigh scattering detection of mercury (II) in water samples

In this study, a facile nanoparticle catalytic sensor for resonance Rayleigh scattering quantification of mercury (II) ion was developed. The developed approach is relied on the selective inhibition of the peroxidase-like activity of polyvinylpyrrolidone-stabilized silver nanoparticles (PVP-Ag-NPs) by mercury (II) ions. The synthesized PVP-Ag-NPs oxidize the aqueous solution of O-Phenylenediamine (colorless) to 2,3-phenazinediamine (bright yellow) and their resonance Rayleigh scattering (RRS) activity was completely suppressed. When mercury (II) was introduced, the RRS activity of PVP-Ag-NPs was turned on combined with a reduction of the intensity of the yellow color. The enhancement in the RRS intensity was related to the concentration of mercury (II) in the linear range of 10-2000 nM. The smaller size (4.5 nm), the large surface area and the uniform size (PDI = 0.379) of the synthesized PVP-Ag-NPs offered a higher chance for interaction between mercury (II) and PVP-Ag-NPs with the advantages of high sensitivity (LOD = 4 nM) and excellent selectivity for mercury (II) detection over several metals and anions.

Single-particle spectroelectrochemistry: electrochemical tuning of plasmonic properties via mercury amalgamation in mesoporous silica coated gold nanorods without structural deformation

This paper presented the possibility of the in situ tuning of the LSPR properties of AuNRs@mSiO2 by Hg deposition via electrochemical potential manipulations without the disturbance of the structural variations of AuNR cores.

An activatable near-infrared hemicyanine-based probe for selective detection and imaging of Hg2+ in living cells and animals

A near-infrared hemicyanine-based probe (CyP) was designed for selective detection and imaging of Hg2+ in living cells and animals.

A capillary-based SERS sensor for ultrasensitive and selective detection of Hg2+ by amalgamation with Au@4-MBA@Ag core-shell nanoparticles

A capillary-based SERS sensor was fabricated for ultrasensitive and selective detection of Hg2+ in water. Au@Ag core-shell NPs embedded with 4-mercaptobenzoic acid (4-MBA) (Au@4-MBA@Ag) were prepared by a seed growth method and fixed on the inner wall of the glass capillary to obtain the sensor. Owing to the amalgamation between Ag and Hg, the capillary-based SERS sensor can specifically recognize the reduced Hg2+ without any recognition element, and the resulted Ag/Hg amalgam can weaken the SERS activity of Ag shell; thus, the SERS intensity of the embedded 4-MBA at 1075 cm-1 gradually decreased with the increase of Hg2+ concentration. Under the optimum condition, the fabricated sensor can sensitively determine Hg2+ in water with a limit of detection (LOD) as low as 0.03 nM. The capillary-based SERS sensor offers the advantages of simple preparation, superior stability, and high selectivity, which is promising for rapid and on-site detection of Hg2+ in water combined with a portable Raman device.

Selective colorimetric sensing of sub-nanomolar Hg2+ based on its significantly enhancing peroxidase mimics of silver/copper nanoclusters

A simple colorimetric sensing strategy for Hg²⁺ ions was developed using silver/copper nanoclusters (Ag/Cu NCs) with excellent selectivity and sensitivity. Bimetallic Ag/Cu NCs were synthesized by using glutathione (GSH) as a template and sodium borohydride as a reducing agent. It was found that the peroxidase-like activity of Ag/Cu NCs was significantly enhanced in the presence of Hg²⁺. Therefore, a colorimetric method based on catalysis was developed to detect Hg²⁺ with a linear concentration range of 0.1-700 nM and a detection limit of 0.05 nM (S/N = 3). The common species have no effect on Hg²⁺ ion detection. Furthermore, this method is applicable to accurately detect Hg²⁺ in real aqueous samples and is reproducible. Therefore, owing to the merits of sensitivity, selectivity, rapid response and visual read-out, it can be promising in the development of a portable Hg²⁺ analyzer for on-site detection.

The synthesis of novel fluorescent bimetal nanoclusters for aqueous mercury detection based on aggregation-induced quenching

In this research, new bimetal nanoclusters (DAMP-AuAg BNCs) with 4,6-diamino-2-mercaptopyrimidine (DAMP) as a reducing agent and stabilizer ligand were exploited. The nanoclusters displayed excellent fluorescent properties, very small size, good stability, and water solubility. It was found that the as-prepared DAMP-AuAg BNCs exhibited strong fluorescent emission at 640 nm under an excitation wavelength of 473 nm with a large Stokes shift of 167 nm, and the red fluorescence could be readily quenched with aqueous Hg²⁺. The DAMP-AuAg BNCs showed good specificity and sensitivity toward Hg²⁺ in aqueous solution, and the fluorescence analysis of Hg²⁺ showed a wide linear range from 0.85 μM to 246 μM and a detection limit of 20 nM. It is demonstrated that strong Hg²⁺-Au⁺ interactions led to the aggregation of nanoclusters, which caused the quenching of the fluorescence, and the affinity of Hg²⁺ for nitrogen should also be considered. Due to the relevant good performance of DAMP-AuAg BNCs, they were applied to the fluorescence analysis of Hg²⁺ in real water samples and were found to be a potential fluorescent sensor for aqueous mercury ions.

Unusual Reactivity of Graphene Quantum Dot-Wrapped Silver Nanoparticles with Hg(II): Spontaneous Growth of Hg Flowers and Their Electrocatalytic Activity

The galvanic reaction (GR) between a graphene quantum dot (GQD)-stabilized AgNP (Ag-GQD)-modified glassy carbon (GC) surface and Hg(II) leads to complete dissolution of AgNPs within 15 min and subsequent growth of Hg(0) as a "flower" on the GQD surface. This is unusual because generally the GR of bulk Ag/AgNPs with Hg(II) leads to the formation of a Hg-Ag amalgam/core shell structure. The appearance of peaks at 99.9 and 103.9 eV in X-ray photoelectron spectroscopy confirms Hg(0) on GQDs, whereas the disappearance of a peak at 370 eV indicates complete dissolution of Ag(0). When 200 ppm Hg(II) interacts with Ag-GQDs for 10 min, coalescence of AgNPs takes place along with the formation of Hg(0) petals separately. However, Hg(0) is grown as a flower with 2 μm size, and complete dissolution of AgNPs occurs subsequently after 15 min. The reason for anti-amalgamation is the direct deposition of Hg(0) by the available oxygen functional groups, followed by its strong adsorption on the graphene surface of GQDs. The subsequent growth of Hg(0) as a flower is due to the GR between AgNPs and Hg(II). Interestingly, the Hg flower-GQD-modified GC electrode acts as a good electrocatalyst toward H₂O₂ reduction by decreasing its overpotential by 150 mV in contrast to GC/Ag-GQDs.

A sensitive turn-off-on fluorometric sensor based on S,N co-doped carbon dots for environmental analysis of Hg(II) ion

A simple and sensitive fluorescence turn-off-on sensor was established by means of S,N co-doped carbon dots (S,N-CDs) and Ag nanoparticles (AgNPs) for the determination of Hg²⁺ . For this purpose, blue emissive S,N-CDs were hydrothermally synthesized and characterized using transmission electron microscopy, Fourier transform infrared spectroscopy, and energy dispersive X-ray spectroscopy. We observed that the fluorescence intensity of the as-prepared S,N-CDs was impressively quenched by AgNPs. The quenching mechanism was studied and attributed to nanosurface energy transfer and the inner filter effect between S,N-CDs and AgNPs. Furthermore, by adding Hg²⁺ , the fluorescence intensity of S,N-CDs/AgNPs was restored as a result of aggregation of AgNPs in the presence of Hg²⁺ . Based on these facts, S,N-CDs and AgNPs were exploited to design a sensitive turn-off-on sensor for analysis of Hg²⁺ . The recovered fluorescence signal was proportional to the concentration of Hg²⁺ in the range 1.5-2000 nM with a detection limit of 0.51 nM. The established sensor was used with satisfactory results for measurement of Hg²⁺ in environmental water samples.

A nanozyme-based enhanced system for total removal of organic mercury and SERS sensing

Total removal of organic mercury in industrial wastewater is a crucially important task facing environmental pollution in the current world. Herein, we demonstrate the fabrication of Au-NiFe layered double hydroxide (LDH)/rGO nanocomposite as not only an efficient nanozyme with oxidase-like activity but also an efficient surface-enhanced Raman spectroscopy (SERS) substrate to determine organic mercury, with the minimum detection concentration as low as 1 × 10^-8 M. According to the binding energy of X-Ray photoelectron spectrometer (XPS) and the free radicals of electron paramagnetic resonance (EPR) spectra, the mechanism of catalytic enhanced degradation is the production of Au-amalgam on Au surface, accelerating the electron transfer and the generation of O₂^•- radicals from oxygen molecules and •CH₃ radicals from the methyl group in MeHg to participate the oxidase-like reaction. Furthermore, the Au-NiFe LDH/rGO nanocomposite is able to degrade and remove 99.9% of organic mercury in two hours without the secondary pollution by Hg²⁺. In addition, the material can be used for the multiple degradation-regeneration cycles in actual applications, which is significant in terms of the environmental and economic point of view. This work may open a new horizon for both highly sensitive detection and thorough degradation of organic mercury in environmental science and technology.

Preparation of Ag-cellulose nanocomposite for the selective detection and quantification of mercury at nanomolar level and the evaluation of its photocatalytic performance

Mercury is a toxic heavy metal that reaches to the water bodies mainly by coal burning, mining and petrol refining. The study was focused to investigate the application of Ag-cellulose nanocomposite to detect and quantify mercury colorimetrically. The Ag-cellulose nanocomposite was characterized by X-ray diffraction, Transmission electron microscopy, Fourier transform infrared spectroscopy, UV-visible spectroscopy, particle size analyzer and zetasizer. The study identified that the presence of other metal ions did not interfere with the detection of Hg²⁺ ion by the probe. The prepared Ag-cellulose nanocomposite-phenylalanine conjugate incorporated paper strip showed an excellent result in Hg²⁺ detection. The Ag-cellulose nanocomposite was used to quantify the unknown concentration of mercury on real sample (environmental sample) and it was found to be highly accurate by confirming with atomic absorption spectrophotometric analysis. The Ag-cellulose nanocomposite showed effective detection at 45 °C, pH 9 and 0.1% of salinity. The Ag-cellulose nanocomposite showed efficient photocatalytic performance under visible light irradiation. The half-life period of MB by Ag-cellulose nanocomposite under visible light was determined to be 90 min. The study suggests the application of prepared probe in photocatalysis and the detection of Hg²⁺ from various environmental samples.

A Green, Rapid and Efficient Dual-Sensors for Highly Selective and Sensitive Detection of Cation (Hg2+) and Anion (S2-) Ions Based on CMS/AgNPs Composites

Detection of mercury (Hg²⁺) and sulfide (S²⁻), universal and well-known toxic ions, is crucial in monitoring several diseases. How to design and fabricate the high-performance sensor for simultaneously and accurately detecting the Hg²⁺ and S²⁻ is critical. Herein, we proposed a novel and convenient strategy for optical detection of Hg²⁺ and S²⁻ by employing a carboxymethyl cellulose sodium/silver nanoparticle (CMS/AgNPs) colloidal solution, in which AgNPs were used as monitor for Hg²⁺ and S²⁻, and the CMS was utilized as both the stabilizer and the hydrophilic substrate for AgNPs. Well-identifiable peaks for Hg²⁺ and S^2– were obtained in water based on UV–VIS absorption spectra, the absorbance intensity and/or position of nano-silver vary with the addition of Hg²⁺ cation and S^2– anion, accompanying with color change. Impressively, the optimal AgNPs anchored CMS exhibited a high sensitivity and selectivity toward Hg²⁺ and S²⁻, the change in absorbance was linear with the concentration of Hg²⁺ (0–50 μM) and S²⁻ (15–70 μM), and the lowest limits of detection (LOD) were 1.8 × 10⁻⁸ M and 2.4 × 10⁻⁷ M, respectively. More importantly, owing to the superior properties in testing Hg²⁺ and S²⁻, the fabricated sensor was successfully applied for detection of target ions in lake and tap water samples. All these good results implied that the designed strategy and as-designed samples is promising in detecting cation (Hg²⁺) and anion (S²⁻) ions and open up new opportunities for selecting other kinds of ions.

Gum acacia-based silver nanoparticles as a highly selective and sensitive dual nanosensor for Hg(ii) and fluorescence turn-off sensor for S2− and malachite green detection

A facile and green method was adopted to synthesize highly selective gum acacia-mediated silver nanoparticles as dual sensor (fluorescence turn-on and colorimetric) for Hg(ii) and fluorescence turn-off sensor for S²⁻ and malachite green. The mechanism proposed for a dual response towards Hg(ii) is the redox reaction between Ag(0) and Hg(ii), resulting in the formation of Ag(i) and Hg(0) and electron transfer from gum acacia to Ag(i), which further leads to the formation of an Ag@Hg nanoalloy. The enhanced fluorescence signal was quenched selectively by S²⁻ owing to the formation of Ag₂S and HgS. The reported nanosensor was found to be useful for sensing malachite green via the inner filter effect. The linear ranges were 3 nmol L⁻¹ to 13 μmol L⁻¹ for Hg(ii), 3–170 μmol L⁻¹ for S²⁻ and 7–80 μmol L⁻¹ for malachite green, and the corresponding detection limits were 2.1 nmol L⁻¹ for Hg(ii), 1.3 μmol L⁻¹ for S²⁻ and 1.6 μmol L⁻¹ for malachite green.

Gum acacia-stabilized silver nanoparticles for the detection of Hg(ii), S²⁻ and malachite green.

Multicolor Aptasensor Based on DNA-Induced Au-Ag Nanorods for Simultaneous and Visual Detection of Inorganic and Organic Mercury

Compared to inorganic mercury (Hg²⁺), methyl-mercury (CH₃Hg⁺) and ethyl-mercury (C₂H₅Hg⁺) (organic mercury) not only have a much stronger toxicity but also are more easily accumulated by marine organisms to produce bioamplification. Therefore, the simultaneously onsite detection of Hg²⁺ and organic mercury is of great significance to ensure the safety of seafood, and it is also a hard challenge. We designed a T-rich aptamer, H_T7, for specifically recognizing Hg²⁺ and organic mercury and developed a multicolor aptasensor for simultaneous discrimination and detection of Hg²⁺ and organic mercury with only bare-eye observation using H_T7 as a recognition probe and gold nanorods (AuNRs) as a signal. In the presence of Hg²⁺ and Ag⁺, Hg²⁺ preferentially and specifically bind with H_T7 immobilized on AuNRs surface and induce the formation of a monolayer Ag/Hg amalgam on the AuNRs surface after reduction, resulting in a change in color from orange to faint purple and a corresponding shift in the absorption peak from 820 to 730 nm in the solution. However, in the presence of CH₃Hg⁺ or C₂H₅Hg⁺ and Ag⁺, CH₃Hg⁺ or C₂H₅Hg⁺ preferentially bind with H_T7 immobilized on the AuNRs surface and induce the formation of a monolayer Ag⁰ on the AuNRs surface after reduction, which results in the change in color from orange to atrovirens and the corresponding shift in the absorption peak shift from 820 to 670 nm in the solution. Thus, the inorganic and organic mercury (total of CH₃Hg⁺ and C₂H₅Hg⁺) can be specifically discriminated and detected by only bare-eye observation. The method can be used to simultaneously detect inorganic and organic mercury in seawater by the bare-eye observation with a visual detection limit of 2.0 ppm for Hg²⁺ and 10.0 ppm for organic mercury. The success of this study is a useful enlightenment to develop an instrument-free method for an onsite detection of trace inorganic and organic mercury in environment by a bare-eye observation, although the sensitivity of the method is relatively low.

Construction of novel multifunctional luminescent nanoparticles based on DNA bridging and their inhibitory effect on tumor growth

Cyclic RGD peptide was introduced onto the surface of silver nanoparticle (AgNP)-single strand DNA (ssDNA)-graphene quantum dots (GQDs) (ADG) after coating with a hybrid phospholipid material (ADG-DDPC) to be used for antitumor treatment. The Ag and ssDNA content was quantified. The morphology and properties of the nanoparticles were characterized by ultraviolet-visible absorption spectroscopy (UV-VIS), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and atomic force microscopy (AFM). The etching effect of H2O2 on the AgNPs and the cleavage of DNA was observed. The cytotoxicity of the ADG-DDPC was investigated using the cell viability and LDH content. The cell uptake was evaluated by using the fluorescence recovery of the GQDs in the ADG-DDPC. The antitumor effects of ADG-DDPC were also evaluated. The content of the ssDNA was 15.3 μg mL-1. The content of the silver element in AgNPs was 3.75 μg mL-1 and 20.43 μg mL-1 in ADG-DDPC. ADG were distributed uniformly with the GQDs on the surface. After coating with hybrid phospholipid membranes containing DSPE-PEG2000-cRGD, ADG-DDPC was detected with an average size of 25.2 nm with a low IC50 of 209.68 ng mL-1 and showed LDH activity on HeLa cells. A better cellular uptake of ADG-DDPC was observed in HeLa cells, compared with cRGD-unmodified ADG nanoparticles (ADG-DDP), up to 6 and 12 h using the fluorescence recovery of GQDs as a measurement. Compared with ADG-DDP (3.6 mg of silver equivalent per kg body weight), ADG-DDPC at the same dose significantly halted 50.9% of tumor growth with little change to body weights when compared with a PTX Injection (10 mg kg-1). The novel nanoparticles, ADG-DDPC, could target tumor sites to exhibit multifunctional inhibition on tumor growth with little toxicity.

Fluorometric determination of mercury(II) using positively charged gold nanoparticles, DNA-templated silver nanoclusters, T-Hg(II)-T interaction and exonuclease assisted signal amplification

The authors describe a method for detection of Hg²⁺ by using positively charged gold nanoparticles ((+)AuNPs) as a quencher of the fluorescence of DNA-capped silver nanoclusters (DNA-AgNCs) which are negatively charged. In the presence of Hg²⁺, a DNA duplex is formed through T-Hg²⁺-T coordination chemistry. The duplex can be digested by exonuclease III to form smaller DNA fragments. This leads to the release of the AgNCs and the recovery of fluorescence, best measured at excitation/emission wavelengths of 460/530 nm. The (+)AuNPs and Hg²⁺ are also released and can be reused for target recycling signal amplification. Based on these findings, a method is worked out for the determination of Hg²⁺ that works in the 5.0 pM to 10 nM concentration range and has a detection limit as low as 2.3 pM. It is highly selective because of the highly specific formation of T-Hg²⁺-T bonds. Graphical abstract By using ultrastable and positively charged gold nanoparticles as fluorescence quenchers and exonuclease assisted signal amplification, a method is developed for the sensitive and selective detection of Hg²⁺ in water samples.

The detection of mercury ion using DNA as sensors based on fluorescence resonance energy transfer

Mercury ion (Hg²⁺) is a heavy metal that can cause serious water pollution. With the accumulation of large quantities in lakes, rivers, freshwater and aquatic life, Hg²⁺ can pass through the food chain, entering the human body and endangering health. Hg²⁺ detection has therefore become important thereby attracting extensive interests. Currently, several DNA-based sensors have been used for Hg²⁺ detection because they are not easy to degrade and are very stable. This paper summarizes the application of some DNA-based sensors based on fluorescence resonance energy transfer (FRET), analyzes their characteristic, and compares their sensitivity. Future perspectives and possible challenges in this area are also outlined.

Smart app-based on-field colorimetric quantification of mercury via analyte-induced enhancement of the photocatalytic activity of TiO2-Au nanospheres

We have devised a unique strategy for highly sensitive, selective, and colorimetric detection of mercury based on analyte-induced enhancement of the photocatalytic activity of TiO₂-Au nanospheres (TiO₂-Au NSs) toward degradation of methylene blue (MB). Through electrostatic interactions, Au nanoparticles are attached to poly-(sodium 4-styreneulfonate)/poly(diallyldimethylammonium chloride) modified TiO₂ nanoparticles, which then form an Au shell on each TiO₂ core through reduction of Au³⁺ with ascorbic acid. Notably, the deposition of Hg species (Hg²⁺/CH₃Hg⁺) onto TiO₂-Au NSs through strong Au-Hg aurophilic interactions speeds up catalytic degradation of MB. The first-order degradation rates of MB by TiO₂-Au NSs and TiO₂-Au-Hg NSs are 1.4 × 10^-2 min^-1 and 2.1 × 10^-2 min^-1, respectively. Using a commercial absorption spectrometer, the TiO₂-Au NSs/MB approach provides linearity (R² = 0.98) for Hg²⁺ over a concentration range of 10.0 to 100.0 nM, with a limit of detection (LOD) of 1.5 nM. On the other hand, using a low-cost smartphone app that records the color changes (ΔRGB) of MB solution based on the red-blue-green (RGB) component values, the TiO₂-Au NSs/MB approach provides an LOD of 2.0 nM for Hg²⁺ and 5.0 nM for CH₃Hg⁺, respectively. Furthermore, the smartphone app sensing system has been validated for the analyses of various samples, including tap water, lake water, soil, and Dorm II, showing its great potential for on-line analysis of environmental and biological samples. Graphical Abstract ᅟ.

Specifically and Visually Detect Methyl-Mercury and Ethyl-Mercury in Fish Sample Based on DNA-Templated Alloy Ag-Au Nanoparticles

Methyl-mercury (CH₃Hg⁺) and ethyl-mercury (C₂H₅Hg⁺) have much higher toxicity than Hg²⁺ and can be more easily accumulated by organisms to form severe bioamplification. Hence, the specific and on-site detection of CH₃Hg⁺ and C₂H₅Hg⁺ in seafood is of great significance and a hard challenge. We herein designed two T-rich aptamers (H_T5 and H_T7) for specifically recognizing CH₃Hg⁺ and the total of CH₃Hg⁺ and C₂H₅Hg⁺, respectively. In the presence of all Au³⁺, Ag⁺, and T-rich aptamer, CH₃Hg⁺ and C₂H₅Hg⁺ specifically and preferentially bind with aptamer and thus induced the formation of alloy Ag-Au nanoparticles after reduction, which led to the color change in solution. This provided a sensing platform for the instrument-free visual discrimination and detection of CH₃Hg⁺ and C₂H₅Hg⁺. By using H_T5 as probe, the method can be used to detect as low as 5.0 μM (equivalent to 1.0 μg Hg/g) of CH₃Hg⁺ by bare eye observation and 0.5 μM (equivalent to 100 ng Hg/g) of CH₃Hg⁺ by UV-visible spectrometry. By using H_T7 as probe, the method can be used to detect the total concentration of CH₃Hg⁺ and C₂H₅Hg⁺ with a visual detection limit of 5.0 μM (equivalent to 1.0 μg Hg/g) and a UV-visible spectrometry detection limit of 0.6 μM (equivalent to 120 ng Hg/g). The proposed method has been successfully used to detect CH₃Hg⁺ and C₂H₅Hg⁺ in fish muscle samples with a recovery of 101-109% and a RSD ( n = 6) < 8%. The success of this study provided a potential method for the specific and on-site detection of CH₃Hg⁺ and C₂H₅Hg⁺ in seafood by only bare eye observation.

Colorimetric detection of Hg(II) by measurement the color alterations from the "before" and "after" RGB images of etched triangular silver nanoplates

It is shown that triangular silver nanoplates (TAgNPs) are viable colorimetric probes for the fast, sensitive and selective detection of Hg(II). Detection is accomplished by reducing Hg(II) ions to elemental Hg so that an Ag/Hg amalgam is formed on the surface of the TAgNPs. This leads to the inhibition of the etching TAgNPs by chloride ions. Correspondingly, a distinct color transition can be observed that goes from yellow to brown, purple, and blue. The color alterations extracted from the red, green, and blue part of digital (RGB) images can be applied to the determination of Hg(II). The relationship between the Euclidean distances (EDs), i.e. the square roots of the sums of the squares of the ΔRGB values, vary in the 5 nM to 100 nM Hg(II) concentration range, and the limit of detection is as low as 0.35 nM. The color changes also allow for a visual estimation of the concentrations of Hg(II). The method is simple in that it only requires a digital camera for data acquisition and a Photoshop software for extracting RGB variations and data processing. Graphical abstract Hg²⁺ detection was achieved by anti-etching of TAgNPs caused by the formation of silver amalgam, along with vivid multicolor variations from yellow to brown, purple, and eventually to be blue.