Microfluidic Chip-Based Online Electrochemical Detecting System for Continuous and Simultaneous Monitoring of Ascorbate and Mg2+ in Rat Brain

Impact of nanotechnology on progress of flow methods in chemical analysis: A review

In evolution of instrumentation for analytical chemistry as crucial technological breakthroughs should be considered a common introduction of electronics with all its progress in integration, and then microprocessors which was followed by a widespread computerization. It is seems that a similar role can be attributed to the introduction of various elements of modern nanotechnology, observed with a fast progress since beginning of this century. It concerns all areas of the applications of analytical chemistry, including also progress in flow analysis, which are being developed since the middle of 20th century. Obviously, it should not be omitted the developed earlier and analytically applied planar structures like lipid membranes or self-assembled monolayers They had essential impact prior to discoveries of numerous extraordinary nanoparticles such as fullerenes, carbon nanotubes and graphene, or nanocrystalline semiconductors (quantum dots). Mostly, due to catalytic effects, significantly developed surface and the possibility of easy functionalization, their application in various stages of flow analytical procedures can significantly improve them. The application of new nanomaterials may be used for the development of new detection methods for flow analytical systems in macro-flow setups as well as in microfluidics and lateral flow immunoassay tests. It is also advantageous that quick flow conditions of measurements may be helpful in preventing unfavorable agglomeration of nanoparticles. A vast literature published already on this subject (e.g. almost 1000 papers about carbon nanotubes and flow-injection analytical systems) implies that for this reviews it was necessary to make an arbitrary selection of reported examples of this trend, focused mainly on achievements reported in the recent decade.

Echem methods and electrode types of the current in vivo electrochemical sensing

For a long time, people have been eager to realize continuous real-time online monitoring of biological compounds. Fortunately, in vivo electrochemical biosensor technology has greatly promoted the development of biological compound detection. This article summarizes the existing in vivo electrochemical detection technologies into two categories: microdialysis (MD) and microelectrode (ME). Then we summarized and discussed the electrode surface time, pollution resistance, linearity and the number of instances of simultaneous detection and analysis, the composition and characteristics of the sensor, and finally, we also predicted and prospected the development of electrochemical technology and sensors in vivo.

A "switch-on" fluorescence assay based on silicon quantum dots for determination of ascorbic acid

Water dispersible silicon quantum dots (SiQDs) showing blue fluorescence were synthesized with 3-aminopropyltriethoxysilane (APTES) as silicon source. Based on the synthesized SiQDs as the photoluminescence unit, MnO₂ nanosheets (NS) as the quencher, a "switch-on" fluorescence assay for the determination of ascorbic acid (AA) was designed. The fluorescence of SiQDs can be effectively quenched by MnO₂ NS because of the internal filtration effect. In the presence of AA, MnO₂ is reduced to Mn²⁺, so that the fluorescence of SiQDs is partially recovered. The recovered fluorescence intensity was related to the concentration of AA. Under the optimal experimental conditions, the linear response range of the assay to AA is 1-80 µM, and the detection limit is 0.48 µM. The method for the determination of AA has the advantages of simple, low cost, good selectivity and sensitivity. The assay has been successfully applied to the quantification of AA in beverage (mizone) samples, which proves the practicability of the assay.

Electrochemical Sensing of Ascorbate as an Index of Neuroprotection from Seizure Activity by Physical Exercise in Freely Moving Rats

Physical exercise (PE) has been drawing increasing attention to prevent and alleviate neural damage of brain diseases; however, in vivo sensing of the neuroprotection ability of PE remains a challenge. Here, we find that ascorbate can be used as a small molecular index for neuroprotective function of PE and the neuroprotection ability of PE can thus be in vivo monitored with an online electrochemical system (OECS) in freely moving animals. With the OECS as the sensing system, we find that the concentration of ascorbate in the microdialysate from the striatum increases greatly in kainic acid (KA)-induced seizure rats and reaches twice the basal level (i.e., 214.4 ± 32.7%, p < 0.001, n = 4) at a time point 90 min after KA microinjection. Such an increase of ascorbate is obviously attenuated (i.e., 153.6 ± 23.9% of the basal level, p < 0.05, n = 3) after PE, showing the neuroprotective activity of PE. This finding is believed to be significant in providing chemical insight into the neuroprotection ability of PE.

ATP-responsive laccase@ZIF-90 as a signal amplification platform to achieve indirect highly sensitive online detection of ATP in rat brain

A novel electrochemical online system for indirect, highly sensitive and selective online monitoring of ATP in the cerebral microdialysate is presented based on the particular reaction of ATP with zeolitic imidazole framework-90 (ZIF-90) encapsulated laccase microcrystals (laccase@ZIF-90) and the natural catalytic activity of laccase.

Persistent oppression and simple decompression both exacerbate spinal cord ascorbate levels

Background: Surgical decompression after acute spinal cord injury has become the consensus of orthopaedic surgeons. However, the choice of surgical decompression time window after acute spinal cord injury has been one of the most controversial topics in orthopaedics. Objective: We apply an online electrochemical system (OECS) for continuously monitoring the ascorbate of the rats' spinal cord to determine the extent to which ascorbate levels were influenced by contusion or sustained compression. Methods: Adult Sprague-Dawley rats (n=10) were instrumented for ascorbate concentration recording and received T11 drop spinal cord injury (SCI). The Group A (n=5) were treated with immediately decompression after SCI. The Group B (n=5) were contused and oppressed until 1 h after the injury to decompress. Results: The ascorbate level of spinal cord increased immediately by contusion injury and reached to 1.62 μmol/L ± 0.61 μmol/L (217.30% ± 95.09% of the basal level) at the time point of 60 min after the injury. Compared with the Group A, the ascorbate level in Group B increased more significantly at 1 h after the injury, reaching to 3.76 μmol/L ± 1.75 μmol/L (430.25% ± 101.30% of the basal level). Meanwhile, we also found that the decompression after 1 hour of continuous compression will cause delayed peaks of ascorbate reaching to 5.71 μmol/L ± 2.69 μmol/L (627.73% ± 188.11% of the basal level). Conclusion: Our study provides first-hand direct experimental evidence indicating ascorbate is directly involved in secondary spinal cord injury and exhibits the dynamic time course of microenvironment changes after continuous compression injury of the spinal cord.

Bionanosensor based on N-doped graphene quantum dots coupled with CoOOH nanosheets and their application for in vivo analysis of ascorbic acid

Herein, we employ 3D nitrogen-doped porous graphene frameworks (NPG) as raw material to prepare emissive nitrogen doped graphene quantum dots (r-NGQDs) via chemical oxidation method. The as-prepared fluorescent r-NGQDs was integrated with CoOOH nanosheets to construct a sensing platform for in vivo ascorbic acid (AA) analysis. Initially, the fluorescence emission intensity of r-NGQDs was quenched by CoOOH nanosheets based on the inner filter effect (IFE). Then the quenched intensity of r-NGQDs and CoOOH nanosheets system was enlightened by addition of AA, since AA could consume CoOOH nanosheets through redox reaction, leading to the release of r-NGQDs and fluorescence restoration. Moreover, the restored fluorescence intensity of r-NGQDs is highly dependent on the concentration of AA which endows them as a quantitative analysis of AA with a limit of detection (LOD) reach up to1.85 μM (n = 3) in aqueous solution. Finally, the as constructed bionanosensor was further employed for in vivo analysis of AA in living rat brain microdialysate with basal value up to 9.4 ± 1.4 μM (n = 3).

Antibody-based nanotechnology

Antibodies are considered the hallmark of the adaptive immune system in that they mediate various key biological functions, such as direct neutralization and recruitment of effector immune cells to eliminate invading pathogens. Antibodies exhibit several unique properties, including high diversity (enabling binding to a wide range of targets), high specificity and structural integrity. These properties and the understanding that antibodies can be utilized in a wide range of applications have motivated the scientific community to develop new approaches for antibody repertoire analysis and rapid monoclonal antibody discovery. Today, antibodies are key modules in the pharmaceutical and diagnostic industries. By virtue of their high affinity and specificity to their targets and the availability of technologies to engineer different antibodies to a wide range of targets, antibodies have become the most promising natural biological molecules in a range of biotechnological applications, such as: highly specific and sensitive nanobiosensors for the diagnostics of different biomarkers; nanoparticle-based targeted drug delivery systems to certain cells or tissues; and nanomachines, which are nanoscale mechanical devices that enable energy conversion into precise mechanical motions in response to specific molecular inputs. In this review, we start by describing the unique properties of antibodies, how antibody diversity is generated, and the available technologies for antibody repertoire analysis and antibody discovery. Thereafter, we provide an overview of some antibody-based nanotechnologies and discuss novel and promising approaches for the application of antibodies in the nanotechnology field. Overall, we aim to bridge the knowledge gap between the nanotechnology and antibody engineering disciplines by demonstrating how technological advances in the antibody field can be leveraged to develop and/or enhance new technological approaches in the nanotechnology field.

In-situ growth of cobalt oxyhydroxide on graphitic-phase C3N4 nanosheets for fluorescence turn-on detection and imaging of ascorbic acid in living cells

Cobalt oxyhydroxide (CoOOH) was grown on the surface of graphitic-phase C₃N₄ nanosheets to obtain an activatable fluorescent nanoprobe for ascorbic acid (AA). The probe was applied to the detection of AA in biological fluids and to image AA in HeLa cells. The negatively charged nanosheets first adsorb Co²⁺, and then the CoOOH nanoflakes are generated in-situ on the surface of g-C₃N₄. This results in the quenching of the blue fluorescence (with excitation/emission maxima of 345/435 nm) via fluorescence resonance energy transfer from g-C₃N₄ to CoOOH. The AA-induced redox reaction reduces the trivalent cobalt ion in CoOOH to Co²⁺ which then becomes released from the nanosheets. This leads to the recovery of fluorescence. The method can quantify AA in the 1.0 to 800 μM concentration range at near neutral pH values. When applied to cell extracts, the limit of detection is 0.14 μM. The nanoprobe was successfully applied to the determination of AA in serum and urine, and to image AA in living HeLa cells. Additional attractive features include the ease of preparation, low cytotoxicity, rapid fluorometric turn-on response, and good biocompatibility. Graphical abstract Schematic presentation of an activatable fluorescent nanoprobe. It consists of CoOOH nanoflakes that were modified withg-C₃N₄ nanosheets. It enables monitoring of AA in the biological samples as well as imaging of AA in living cells.

Simple and label-free fluorescence detection of ascorbic acid in rat brain microdialysates in the presence of catecholamines

A facile and ultrasensitive sensor was constructed successfully for AA sensing based on the synergistic effect of reducing capability of AA and IFE.

Efficient Two-Photon Fluorescence Nanoprobe for Turn-On Detection and Imaging of Ascorbic Acid in Living Cells and Tissues

Ascorbic acid (AA) serves as a key coenzyme in many metabolic pathways, and its abnormal level is found to be associated with several diseases. Therefore, monitoring AA level in living systems is of great biomedical significance. In comparison with one-photon excited fluorescent probes, two-photon (TP) excited probes are more suitable for bioimaging, as they could afford higher imaging resolution with deeper imaging depth. Here, we report for the first time an efficient TP fluorescence probe for turn-on detection and imaging of AA in living cells and tissues. In this nanosystem, the negatively charged two-photon nanoparticles (TPNPs), which were prepared by modifying the silica nanoparticles with a two-photon dye, could adsorb cobalt oxyhydroxide (CoOOH) nanoflakes which carried positive charge by electrostatic force, leading to a remarkable decrease in their fluorescence intensity. However, the introduction of AA could induce the fluorescence recovery of the nanoprobe because it could reduce CoOOH into Co(2+) and result in the destruction of the CoOOH nanoflakes. The nanosystem exhibits a high sensitivity toward AA, with a LOD of 170 nM observed. It also shows high selectivity toward AA over common potential interfering species. The nanoprobe possessed both the advantages of TP imaging and excellent membrane-permeability and good biocompatibility of the silica nanoparticles and was successfully applied in TP-excited imaging of AA in living cells and tissues.

A durable non-enzymatic electrochemical sensor for monitoring H2O2 in rat brain microdialysates based on one-step fabrication of hydrogels

A non-enzymatic electrochemical H₂O₂ sensor was developed by in situ fabrication of biocompatible chitosan hydrogels, in which a specific recognition molecule for H₂O₂ – thionine – was stably immobilized via one-step electrodeposition.

Biomimetic cardiac microsystems for pathophysiological studies and drug screens

Microfabricated organs-on-chips consist of tissue-engineered 3D in vitro models, which rely on engineering design and provide the physiological context of human organs. Recently, significant effort has been devoted to the creation of a biomimetic cardiac system by using microfabrication techniques. By applying allometric scaling laws, microengineered cardiac systems simulating arterial flow, pulse properties, and architectural environments have been implemented, allowing high-throughput pathophysiological experiments and drug screens. In this review, we illustrate the recent trends in cardiac microsystems with emphasis on cardiac pumping and valving functions. We report problems and solutions brought to light by existing organs-on-chip models and discuss future directions of the field. We also describe the needs and desired design features that will enable the control of mechanical, electrical, and chemical environments to generate functional in vitro cardiac disease models.

Visualization and quantification of neurochemicals with gold nanoparticles: opportunities and challenges

Gold nanoparticle (Au-NP)-based colorimetric assays offer new opportunitites for the visualization and quantification of neurochemicals involved in physiological and pathological processes due to their high sensitivity, designability, and low technical demands. In this Research News, we systematically review the advances on the development of Au-NP-based colorimetric methods for visualization and quantification of neurochemicals and their potential applications for effectively monitoring neurochemicals in the central nervous system. By integration of the favourable surface chemistry with the high extinction coefficient of Au-NPs, some new principles and methods could be developed for the quantification of neurochemicals involved in brain functions. New strategies to design the surface chemistry of Au-NPs, along with the key challenges yet to be addressed to achieve online visualization and quantification of neurochemicals in the central nervous system, are illustrated and discussed. The questions opened here should inspire future investigations and lead to discoveries that continue the development of the effective analytical protocols based on Au-NPs for neurochemical visualization and quantification.