Failure of ESI Spectra to Represent Metal-Complex Solution Composition: A Study of Lanthanide–Carboxylate Complexes

OptiMS: An Accessible Program for Automating Mass Spectrometry Parameter Optimization and Configuration

Mass spectrometers have an enormous number of user-changeable parameters that drastically affect the observed mass spectrum. Using optimal parameters can significantly improve mass spectrometric data by increasing signal stability and signal-to-noise ratio, which decreases the limit of detection, thus revealing previously unobservable species. However, ascertaining optimal parameters is time-consuming, tedious, and made further challenging by the fact that parameters can act dependently on each other. Consequently, suboptimal parameters are frequently used during characterization, reducing the quality of results. OptiMS, an open-source, cross-platform program, was developed to simplify, accelerate, and more accurately determine optimal mass spectrometer parameters for a given system. It addresses common difficulties associated with existing software such as slow performance, high costs, and limited functionality. OptiMS efficacy was demonstrated through its application to multiple systems, quickly and successfully optimizing instrument parameters unassisted to maximize a user-defined metric, such as the intensity of a particular analyte. Additionally, among other features, OptiMS allows running of a sequence of predefined parameter configurations, reducing the workload of users wishing to obtain mass spectra under multiple sets of conditions.

On the Chemistry of Aqueous Ammonium Acetate Droplets during Native Electrospray Ionization Mass Spectrometry

Ammonium acetate (NH4Ac) is a widely used solvent additive in native electrospray ionization (ESI) mass spectrometry. NH4Ac can undergo proton transfer to form ammonia and acetic acid (NH4+ + Ac- → NH3 + HAc). The volatility of these products ensures that electrosprayed ions are free of undesired adducts. NH4Ac dissolution in water yields pH 7, providing "physiological" conditions. However, NH4Ac is not a buffer at pH 7 because NH4+ and Ac- are not a conjugate acid/base pair (Konermann, L. J. Am. Soc. Mass Spectrom. 2017, 28, 1827-1835.). In native ESI, it is desirable that analytes experience physiological conditions not only in bulk solution but also while they reside in ESI droplets. Little is known about the internal milieu of NH4Ac-containing ESI droplets. The current work explored the acid/base chemistry of such droplets, starting from a pH 7 analyte solution. We used a two-pronged approach involving evaporation experiments on bulk solutions under ESI-mimicking conditions, as well as molecular dynamics simulations using a newly developed algorithm that allows for proton transfer. Our results reveal that during droplet formation at the tip of the Taylor cone, electrolytically generated protons get neutralized by Ac-, making NH4+ the net charge carriers in the weakly acidic nascent droplets. During the subsequent evaporation, the droplets lose water as well as NH3 and HAc that were generated by proton transfer. NH3 departs more quickly because of its greater volatility, causing the accumulation of HAc. Together with residual Ac-, these HAc molecules form an acetate buffer that stabilizes the average droplet pH at 5.4 ± 0.1, as governed by the Henderson-Hasselbalch equation. The remarkable success of native ESI investigations in the literature implies that this pH drop by ∼1.6 units relative to the initially neutral analyte solution can be tolerated by most biomolecular analytes on the short time scale of the ESI process.

Electrospray-Induced Mass Spectrometry Is Not Suitable for Determination of Peptidic Cu(II) Complexes

The toolset of mass spectrometry (MS) is still expanding, and the number of metal ion complexes researched this way is growing. The Cu(II) ion forms particularly strong peptide complexes of biological interest which are frequent objects of MS studies, but quantitative aspects of some reported results are at odds with those of experiments performed in solution. Cu(II) complexes are usually characterized by fast ligand exchange rates, despite their high affinity, and we speculated that such kinetic lability could be responsible for the observed discrepancies. In order to resolve this issue, we selected peptides belonging to the ATCUN family characterized with high and thoroughly determined Cu(II) binding constants and re-estimated them using two ESI-MS techniques: standard conditions in combination with serial dilution experiments and very mild conditions for competition experiments. The sample acidification, which accompanies the electrospray formation, was simulated with the pH-jump stopped-flow technique. Our results indicate that ESI-MS should not be used for quantitative studies of Cu(II)-peptide complexes because the electrospray formation process compromises the entropic contribution to the complex stability, yielding underestimations of complex stability constants.

Atomistic Insights into the Formation of Nonspecific Protein Complexes during Electrospray Ionization

Native electrospray ionization (ESI)-mass spectrometry (MS) is widely used for the detection and characterization of multi-protein complexes. A well-known problem with this approach is the possible occurrence of nonspecific protein clustering in the ESI plume. This effect can distort the results of binding affinity measurements, and it can even generate gas-phase complexes from proteins that are strictly monomeric in bulk solution. By combining experiments and molecular dynamics (MD) simulations, the current work for the first time provides detailed insights into the ESI clustering of proteins. Using ubiquitin as a model system, we demonstrate how the entrapment of more than one protein molecule in an ESI droplet can generate nonspecific clusters (e.g., dimers or trimers) via solvent evaporation to dryness. These events are in line with earlier proposals, according to which protein clustering is associated with the charged residue model (CRM). MD simulations on cytochrome c (which carries a large intrinsic positive charge) confirmed the viability of this CRM avenue. In addition, the cytochrome c data uncovered an alternative mechanism where protein-protein contacts were formed early within ESI droplets, followed by cluster ejection from the droplet surface. This second pathway is consistent with the ion evaporation model (IEM). The observation of these IEM events for large protein clusters is unexpected because the IEM has been thought to be associated primarily with low-molecular-weight analytes. In all cases, our MD simulations produced protein clusters that were stabilized by intermolecular salt bridges. The MD-generated charge states agreed with experiments. Overall, this work reveals that ESI-induced protein clustering does not follow a tightly orchestrated pathway but can proceed along different avenues.

Halide anion discrimination by a tripodal hydroxylamine ligand in gas and condensed phases

Electrospray ionization of solutions containing a tripodal hydroxylamine ligand, H3TriNOx ([((2-tBuNOH)C6H4CH2)3N]) denoted as L, and a hydrogen halide HX: HCl, HBr and/or HI, yielded gas-phase anion complexes [L(X)]- and [L(HX2)]-. Collision induced dissociation (CID) of mixed-halide complexes, [L(HXaXb)]-, indicated highest affinity for I- and lowest for Cl-. Structures and energetics computed by density functional theory are in accord with the CID results, and indicate that the gas-phase binding preference is a manifestation of differing stabilities of the HX molecules. A high halide affinity of [L(H)]+ in solution was also demonstrated, though with a highest preference for Cl- and lowest for I-, the opposite observation of, but not in conflict with, what is observed in gas phase. The results suggest a connection between gas- and condensed-phase chemistry and computational approaches, and shed light on the aggregation and anion recognition properties of hydroxylamine receptors.

A review on the mass spectrometric studies of americium: Present status and future perspective

The manuscript reviews the various mass spectrometric techniques for analysis and chemical studies of Americium. These methods include thermal ionization mass spectrometry (TIMS), and inductively coupled plasma source mass spectrometry (ICPMS) for the determination of Am isotope ratios and concentration in nuclear fuel samples of interest in nuclear technology, and in complex biological and environmental samples. Ultra-sensitive mass spectrometric techniques of resonance-ionization mass spectrometry (RIMS), and accelerator-based mass spectrometry (AMS) are also discussed. The novel applications of electrospray ionization mass spectrometry (ESIMS) to understand the solution chemistry of Am and other actinides are presented. These studies are important in view of the world-wide efforts to develop novel complexing agents to separate lanthanides and minor actinides (Am, Np, and Cm) for partitioning and transmutation of minor actinides from the point of view of nuclear waste management. These mass spectrometry experiments are also of great interest to examine the covalent character of actinides with increasing atomic number. Studies on gas-phase chemistry of Am and its oxides with Knudsen effusion mass spectrometry (KEMS), Fourier-transform ion cyclotron resonance mass spectrometry (FTICR-MS), and laser-based experiments with reflectron time-of-flight mass spectrometer (R-ToF) are highlighted. These studies are important to understand the fundamental chemistry of 5f electrons in actinides. Requirement of certified isotopic reference materials of Am to improve the accuracy of experimental nuclear data (e.g., the half-life of ²⁴³ Am) is emphasized. © 2016 Wiley Periodicals, Inc. Mass Spec Rev.

Addressing a Common Misconception: Ammonium Acetate as Neutral pH "Buffer" for Native Electrospray Mass Spectrometry

Native ESI-MS involves the transfer of intact proteins and biomolecular complexes from solution into the gas phase. One potential pitfall is the occurrence of pH-induced changes that can affect the analyte while it is still surrounded by solvent. Most native ESI-MS studies employ neutral aqueous ammonium acetate solutions. It is a widely perpetuated misconception that ammonium acetate buffers the analyte solution at neutral pH. By definition, a buffer consists of a weak acid and its conjugate weak base. The buffering range covers the weak acid pK_a ± 1 pH unit. NH₄⁺ and CH₃-COO^- are not a conjugate acid/base pair, which means that they do not constitute a buffer at pH 7. Dissolution of ammonium acetate salt in water results in pH 7, but this pH is highly labile. Ammonium acetate does provide buffering around pH 4.75 (the pK_a of acetic acid) and around pH 9.25 (the pK_a of ammonium). This implies that neutral ammonium acetate solutions electrosprayed in positive ion mode will likely undergo acidification down to pH 4.75 ± 1 in the ESI plume. Ammonium acetate nonetheless remains a useful additive for native ESI-MS. It is a volatile electrolyte that can mimic the solvation properties experienced by proteins under physiological conditions. Also, a drop from pH 7 to around pH 4.75 is less dramatic than the acidification that would take place in pure water. It is hoped that the habit of referring to pH 7 solutions as ammonium acetate "buffer" will disappear from the literature. Ammonium acetate "solution" should be used instead. Graphical Abstract ᅟ.

Substructural Components of Organic Colloids from a Pu-Polluted Soil with Implications for Pu Mobilization

Contaminated soil organic matter from the Rocky Flats Environmental Technology Site (RFETS) has been previously shown to accumulate plutonium (Pu) in a colloidal subfraction and is hypothesized to contain cutin-like chemical structures cross-linked with hydroxamate functionality. The present study further characterizes this high Pu affinity subfraction using electrospray ionization Fourier transform ion cyclotron resonance mass spectrometry (ESI-FTICRMS) and discovers additional substructural components. The Pu-enriched fraction was extracted and purified through a series of ultrafiltration and isoelectric focusing (IEF) electrophoresis steps. Predominantly low H/C and high double-bond equivalence (DBE) aromatic and condensed aromatic molecular formulas were detected, 66% of which are included in a COO Kendrick mass defect (KMD) homologous series. This suggests the existence of polycarboxylated aromatic and condensed aromatic formulas, with CHON-type COO KMD formulas relatively more abundant in the purified subfraction where Pu had been observed than in the crude soil fractions which had successively lower Pu concentrations. Nitrogen contents increased with the progression of purification (bulk soil → crude colloid → IEF colloid) and coincided with the trend of Pu concentration; thus, we propose that these nitrogen and carboxyl functionalities of aromatic compounds may also impart significant Pu chelation character to the colloid.

Comment on “Lewis acidic ionic liquids of crown ether complex cations: preparation and applications in organic reactions” by Y. Liang, J. Wang, C. Cheng and H. Jing, RSC Adv., 2016, 6, 93546

In the recently published paper by Liang et al., chlorozincate(ii) anion was identified as [ZnCl₃]⁻ based on Raman spectroscopy. According to every textbook and numerous papers, this band corresponds to [ZnCl₄]²⁻.

Acceleration of metal–ligand complexation kinetics by electrospray ionization

Electrospray ionization mass spectrometry (ESI-MS) is demonstrated to significantly accelerate the kinetics of metal–ligand complexation, with the formation rate constant increasing by more than an order of magnitude over previously determined solution-phase values.

Thermodynamic study of the complexation between Nd3+ and functionalized diacetamide ligands in solution

Three amine-functionalized diamide ligands form tridentate complexes with Nd³⁺ in aqueous solutions. The stability constants of the complexes follow the order of the ligand basicity that can be tuned by different substitutional groups.

Micellization properties of cardanol as a renewable co-surfactant

With the aim to improve the features of surfactant solutions in terms of sustainability and renewability we propose the use of hydrogenated natural and sustainable plant-derived cardanol as an additive to commercial surfactants. In the present study we demonstrated that its addition, in amounts as high as 10%, to commercial surfactants of different charge does not significantly affect surfactant properties. Conversely, the presence of hydrogenated cardanol can strongly affect spectrophotometric determination of CMC if preferential interactions with the dyes used take place. This latter evidence may be profitably exploited in surfactant manufacturing by considering that the concurrent presence of a rigid organic molecule such as Orange OT and 10% hydrogenated cardanol decreases the CMC of CTAB up to 65 times.

Europium, uranyl, and thorium-phenanthroline amide complexes in acetonitrile solution: an ESI-MS and DFT combined investigation

ESI-MS and density functional theory (DFT) methods were combined to elucidate the complexation mechanisms of tetradentate phenanthroline amide ligand with Eu(iii), U(vi), and Th(iv) in an acetonitrile solution.