Stepwise Chemical Reaction Strategy for Highly Sensitive Electrochemiluminescent Detection of Dopamine

Self-Enhanced Electrochemiluminescence Imaging System Based on the Accelerated Generation of ROS under Ultrasound

Electrochemiluminescence (ECL) imaging, as an optical technology, has been developed at full tilt in the field of life science and nanomaterials. However, the relatively low ECL intensity or the high co-reactant concentration needed in the electrochemical reaction blocks its practical application. Here, we developed an ECL imaging system based on the rGO-TiO_2-x composite material, where the co-reactant, reactive oxygen species (ROS), is generated in situ under the synergetic effect of of ultrasound (US) and electric irradiation. The rGO-TiO_2-x composites facilitate the separation of electron (e^-) and hole (h⁺) pairs and inhibit recombination triggered by external US irradiation due to the high electroconductivity of rGO and oxygen-deficient structures of TiO₂, thus significantly boosting ROS generation. Furthermore, the increased defects on rGO accelerate the electron transfer rate, improving the electrocatalytic performance of the composite and forming more ROS. This high ultrasonic-electric synergistic efficacy is demonstrated through the enhancement of photon emission. Compared with the luminescence intensity triggered by US irradiation and electric field, an enhancement of ∼20-fold and 10-fold of the US combined with electric field-triggered emission is observed from this composite. Under the optimized conditions, using dopamine (DA) as a model target, the sensitivity of the US combined ECL strategy for detection of DA is two orders of magnitude higher than that of the ECL method. The successful detection of DA at low concentrations makes us believe that this strategy provides the possibility of applying ECL imaging for cellular single-molecule analysis and cancer therapy.

Ultrasensitive dopamine detection with graphene aptasensor multitransistor arrays

Detecting physiological levels of neurotransmitters in biological samples can advance our understanding of brain disorders and lead to improved diagnostics and therapeutics. However, neurotransmitter sensors for real-world applications must reliably detect low concentrations of target analytes from small volume working samples. Herein, a platform for robust and ultrasensitive detection of dopamine, an essential neurotransmitter that underlies several brain disorders, based on graphene multitransistor arrays (gMTAs) functionalized with a selective DNA aptamer is presented. High-yield scalable methodologies optimized at the wafer level were employed to integrate multiple graphene transistors on small-size chips (4.5 × 4.5 mm). The multiple sensor array configuration permits independent and simultaneous replicate measurements of the same sample that produce robust average data, reducing sources of measurement variability. This procedure allowed sensitive and reproducible dopamine detection in ultra-low concentrations from small volume samples across physiological buffers and high ionic strength complex biological samples. The obtained limit-of-detection was 1 aM (10–18) with dynamic detection ranges spanning 10 orders of magnitude up to 100 µM (10–8), and a 22 mV/decade peak sensitivity in artificial cerebral spinal fluid. Dopamine detection in dopamine-depleted brain homogenates spiked with dopamine was also possible with a LOD of 1 aM, overcoming sensitivity losses typically observed in ion-sensitive sensors in complex biological samples. Furthermore, we show that our gMTAs platform can detect minimal changes in dopamine concentrations in small working volume samples (2 µL) of cerebral spinal fluid samples obtained from a mouse model of Parkinson’s Disease. The platform presented in this work can lead the way to graphene-based neurotransmitter sensors suitable for real-world academic and pre-clinical pharmaceutical research as well as clinical diagnosis.

Sensitive electrochemiluminescence biosensing of polynucleotide kinase using the versatility of two-dimensional Ti3C2TX MXene nanomaterials

Electrochemiluminescence (ECL) is a powerful readout method for the development of (bio)sensors, whose performances depend on the electrode materials and the architecture of its surface. Herein, we demonstrate that the precise control of the sensing interface using the versatility of two-dimensional (2D) transition metal carbides (Ti₃C₂T_X MXene) leads to the enhancement of the ECL signal. This electrode material, which exhibits remarkable structural and electrochemical properties was decorated by the in situ formation of gold nanoparticles (AuNPs) owing to the Ti reducibility. Then, a large amount of the luminophore, Ru(bpy)₃²⁺, was immobilized on Ti₃C₂T_X MXene thanks to its unique negative charge and large specific surface area to obtain Ru-Ti₃C₂T_X-AuNPs. The presented approach exploits the high catalytic activity and excellent conductivity of this 2D nanomaterial as illustrated by the enhanced ECL emission performance of the Ru-Ti₃C₂T_X-AuNPs nanoprobes. Finally, DNA phosphorylated with polynucleotide kinase (PNK) was recognized efficiently by the chelation between Ti and phosphate group. A highly sensitive and selective ECL biosensor was developed for the detection of PNK and the screening of its inhibitors. A lower detection limit of 0.0002 U mL^-1 and wide linear relationship ranged from 0.002 to 10 U mL^-1 were obtained. Furthermore, the practicality of our method was tested in MCF-7 cell lysate, which opens enticing perspectives for future applications of Ti₃C₂T_X materials in the ECL bioanalysis field.

A digital SERS sensing platform using 3D nanolaminate plasmonic crystals coupled with Au nanoparticles for accurate quantitative detection of dopamine

We report a digital surface-enhanced Raman spectroscopy (SERS) sensing platform using the arrays of 3D nanolaminate plasmonic crystals (NLPC) coupled with Au nanoparticles and digital (on/off) SERS signal analysis for the accurate quantitative detection of dopamine (DA) at ultralow concentrations. 3D NLPC SERS substrates were fabricated to support the optically dense arrays of vertically-stacked multi-nanogap hotspots and combined with Raman tag-conjugated Au nanoparticles for NLPC-based dual-recognition structures. We demonstrate that the 3D NLPC-based dual-recognition structures including Au nanoparticle-induced additional hotspots can enable more effective SERS enhancement through the molecular recognition of DA. For the accurate quantification of DA at ultralow concentrations, we conducted digital SERS analysis to reduce stochastic signal variation due to various microscopic effects, including molecular orientation/position variation and the spatial distribution of nanoparticle-coupled hotspots. The digital SERS analysis allowed the SERS mapping results from the DA-specific dual-recognition structures to be converted into binary "On/Off" states; the number of "On" events was directly correlated with low-abundance DA molecules down to 1 pM. Therefore, the digital SERS platform using the 3D NLPC-based dual-recognition structures coupled with Au nanoparticles and digital SERS signal analysis can be used not only for the ultrasensitive, accurate, and quantitative determination of DA, but also for the practical and rapid analysis of various molecules on nanostructured surfaces.

Graphene and Carbon Nanotube-based Electrochemical Sensing Platforms for Dopamine

Dopamine (DA) is an important neurotransmitter, which is created and released from the central nervous system. It plays a crucial role in human activities, like cognition, emotions, and response to anything. Maladjustment of DA in human blood serum results in different neural diseases, like Parkinson's and Schizophrenia. Consequently, researchers have started working on DA detection in blood serum, which is undoubtedly a hot research area. Electrochemical sensing techniques are more promising to detect DA in real samples. However, utilizing conventional electrodes for selective determination of DA encounters numerous problems due to the coexistence of other materials, such as uric acid and ascorbic acid, which have an oxidation potential close to DA. To overcome such problems, researchers have put their focus on the modification of bare electrodes. The aim of this review is to present recent advances in modifications of most used bare electrodes with carbonaceous materials, especially graphene, its derivatives, and carbon nanotubes, for electrochemical detection of DA. A brief discussion about the mechanistic phenomena at the electrode interface has also been included in this review.

Photoelectrochemical Sensing of α-Synuclein Based on a AuNPs/Graphdiyne-Modified Electrode Coupled with a Nanoprobe

We developed a method for photoelectrochemical (PEC) sensing based on a AuNPs/graphdiyne, as a low background signal composite material, modified electrode coupled with a nanoprobe (probe DNA/DA/MBA/WSe₂) for sensitive α-synuclein (α-Syn) detection. A tungsten selenide (WSe₂) nanoflower was first produced with a one-pot solvothermal method and employed as a signal amplification element and the modified substrate of the nanoprobe. The synergy effect between the WSe₂ nanoflower and graphdiyne (GDY) can reduce the photoinduced electron-hole recombination and expedite the spatial charge separation. Due to the synergistic effect of AuNPs/GDY and WSe₂, this detection strategy provides a high signal-to-noise ratio and good performance. The signal indicator, dopamine/4-mercaptophenyl boronic acid/WSe₂ (DA/MBA/WSe₂), was generated with the recognition of boron-diol. In the presence of the α-Syn oligomer, the target triggered cycle I strand displacement amplification and achieved the conversion of the α-Syn oligomer to a massive output of false-target DNA (FT). The output FT was used for the cycle II catalytic hairpin assembly onto the electrode which was modified with AuNPs/GDY and triple-stranded DNA (TsDNA); thereby, plenty of PEC nanoprobes which are composed of probe DNA and the signal indicator are captured, and the photocurrent response is produced correspondingly. This PEC biosensor generated a strong photocurrent with low blank (27.6 nA) and was sensitive to α-Syn oligomer. The limit of detection was 3.3 aM, and the relative standard deviation (RSD) was 3.7% at 100 aM. Moreover, it also has good selectivity, indicating promising potential in clinical diagnostics.

Lithium cobalt phosphate electrode for the simultaneous determination of ascorbic acid, dopamine, and serum uric acid by differential pulse voltammetry

Lithium cobalt phosphate (LCP) was prepared and modified on the surface of glassy carbon electrode (GCE) to fabricate the electrochemical sensor (LCP/GCE) for the simultaneous determination of ascorbic acid (AA), dopamine (DA), and serum uric acid (UA). The homogenous incorporation of carbon improved the conductivity of LCP. Benefiting from the small particle size distribution, LCP/GCE has a large active surface and responds to AA, DA, and UA sensitively and rapidly. For the simultaneous detection with differential pulse voltammetry the anodic peaks of AA, DA, and UA were well-separated and appeared at ~0 V, ~0.19 V, and ~ 0.33 V (vs. Ag/AgCl), respectively. The linear responses toward AA, DA, and UA were in the range 10 μM-8.0 mM, 10 nM-10 μM, and 0.020 μM-25 μM; the detection limits were estimated to be 8.10 μM, 7.50 nM, and 22.7 nM (S/N = 3), respectively. The excellent selectivity and reproducibility of LCP/GCE enable serum UA to be detected without the interference of AA and DA. The recoveries of DA and AA in the serum sample were in the range 95 to 111%. The results indicate that LCP has the potential to be developed as the sensing devices to be applied to in vitro diagnosis. The lithium-ion battery cathodic material, LCP with the excellent adsorption and catalytic behavior, was utilized to fabricate the electrochemical sensor for the sensitive and simultaneous detection of AA, DA, and UA, which achieved the low detection limits and the wide concentration ranges. LCP/GCE can be used for the quantitative detection of serum UA without the interference of DA and AA. In addition, the recoveries of DA and AA in human serum were satisfactory, which illustrate the reliability of LCP/GCE to be applied to in vitro diagnosis.

Advances in nanomedicines for diagnosis of central nervous system disorders

In spite of a great improvement in medical health services and an increase in lifespan, we have witnessed a skyrocket increase in the incidence of central nervous system (CNS) disorders including brain tumors, neurodegenerative diseases (Alzheimer's disease, Parkinson's disease, amyotrophic lateral sclerosis, Huntington's disease), ischemic stroke, and epilepsy, which have seriously undermined the quality of life and substantially increased economic and societal burdens. Development of diagnostic methods for CNS disorders is still in the early stage, and the clinical outcomes suggest these methods are not ready for the challenges associated with diagnosis of CNS disorders, such as early detection, specific binding, sharp contrast, and continuous monitoring of therapeutic interventions. Another challenge is to overcome various barrier structures during delivery of diagnostic agents, especially the blood-brain barrier (BBB). Fortunately, utilization of nanomaterials has been pursued as a potential and promising strategy to address these challenges. This review will discuss anatomical and functional structures of BBB and transport mechanisms of nanomaterials across the BBB, and special emphases will be placed on the state-of-the-art advances in the development of nanomedicines from a variety of nanomaterials for diagnosis of CNS disorders. Meanwhile, current challenges and future perspectives in this field are also highlighted.

In Situ Formation of Gold Nanoparticles Decorated Ti3C2 MXenes Nanoprobe for Highly Sensitive Electrogenerated Chemiluminescence Detection of Exosomes and Their Surface Proteins

In this work, an ultrasensitive electrogenerated chemiluminescence (ECL) biosensor for exosomes and their surface proteins was developed by the in situ formation of gold nanoparticles (AuNPs) decorated Ti₃C₂ MXenes hybrid with aptamer modification (AuNPs-MXenes-Apt). In this strategy, the exosomes were efficiently captured on an exosome recognized CD63 aptamer modified electrode interface. Meanwhile, in situ formation of gold nanoparticles on single layer Ti₃C₂MXenes with aptamer (MXenes-Apt) modification was obtained, in which MXenes acted as both reductants and stabilizer, and no additional reductant and stabilizer involved. The in situ formed AuNPs-MXenes-Apt hybrid not only presented highly efficient recognition of exosomes specifically, but also provide naked catalytic surface with high electrocatalytic activity of gold nanoparticles with predominated (111) facets that significantly improved the ECL signal of luminol. In this way, a highly sensitive ECL biosensor for exosomes detection was constructed ascribing to the synergistic effects of large surface area, excellent conductivity, and catalytic effects of the AuNPs-MXenes-Apt. The detection limit is 30 particles μL^-1 for exosomes derived from HeLa cell line, which was over 1000 times lower than that of conventional ELISA method and the linear range was from 10² particles μL^-1 to 10⁵ particles μL^-1. This ECL sensing platform possessed high selectivity toward exosomes and their surface proteins derived different kinds of tumor cell lines (HeLa cells, OVCAR cells and HepG2 cells), and enabled sensitive and accurate detection of exosomes from human serum, which implied that the ECL biosensor provided a feasible, sensitive, and reliable tool for exosomes detection in exosomes-related clinical diagnostic.

Recent Advances in Electrochemical and Optical Sensing of Dopamine

Nowadays, several neurological disorders and neurocrine tumours are associated with dopamine (DA) concentrations in various biological fluids. Highly accurate and ultrasensitive detection of DA levels in different biological samples in real-time can change and improve the quality of a patient's life in addition to reducing the treatment cost. Therefore, the design and development of diagnostic tool for in vivo and in vitro monitoring of DA is of considerable clinical and pharmacological importance. In recent decades, a large number of techniques have been established for DA detection, including chromatography coupled to mass spectrometry, spectroscopic approaches, and electrochemical (EC) methods. These methods are effective, but most of them still have some drawbacks such as consuming time, effort, and money. Added to that, sometimes they need complex procedures to obtain good sensitivity and suffer from low selectivity due to interference from other biological species such as uric acid (UA) and ascorbic acid (AA). Advanced materials can offer remarkable opportunities to overcome drawbacks in conventional DA sensors. This review aims to explain challenges related to DA detection using different techniques, and to summarize and highlight recent advancements in materials used and approaches applied for several sensor surface modification for the monitoring of DA. Also, it focuses on the analytical features of the EC and optical-based sensing techniques available.

Boronic acid-functionalized molybdenum disulfide quantum dots for the ultrasensitive analysis of dopamine based on synergistic quenching effects from IFE and aggregation

Herein, a novel fluorescent material, boronic acid-functionalized molybdenum disulfide quantum dots (B-MoS₂ QDs) produced by an amidation reaction between 3-aminobenzeneboronic acid and previously prepared molybdenum disulfide quantum dots (MoS₂ QDs), was prepared to fabricate a rapid and sensitive platform for the quantitative analysis of dopamine. This material exhibits strong fluorescence, excellent salt tolerance and light fastness. In particular, the quantum yield of this material is about 21.1 times that of its fundamental material, MoS₂ QDs. Notably, owing to an interesting synergistic effect between the inner filter effect and the aggregation quenching effect, this material was successfully applied for the determination of dopamine in the linear range 0.25-35 μmol L^-1 with the detection limit of 0.087 μmol L^-1; moreover, B-MoS₂ QDs manifested better selectivity in the presence of multiple interferences due to their inert surface. As expected, this proposed material shows satisfactory performance in human serum; thus, the present study exploits a new avenue for the application of functionalized MoS₂ QDs in fluorescence sensing.

Sensing ultra-trace dopamine by restoration of fluorescence on locally acidified gold nanoparticles

An ultra-sensitive sensor was fabricated to measure dopamine through quenching and restoring FITC fluorescence by the competitive binding of dopamine andN-acetylneuraminic acid with mercaptophenylboronic acid anchored on the gold nanoparticles.

A mechanochemically synthesized porous organic polymer derived CQD/chitosan–graphene composite film electrode for electrochemiluminescence determination of dopamine

Herein, we explore a new carbon source for preparation of carbon quantum dots (CQDs) with controllable composition using a porous organic polymer (POP) derived porous carbon via a nitric acid oxidation method. The POP used for the preparation of CQDs was synthesized by mechanochemical Friedel–Crafts alkylation under solvent free conditions. Using the as-prepared CQDs, we develop a simple and effective electrochemiluminescence (ECL) detection method for dopamine (DA) using a CQD/chitosan–graphene composite modified glassy carbon electrode (GCE). Both the electrochemical and ECL behaviors were studied in detail with ammonium persulfate as a coreactant. The complementary structure and synergistic function of the composite give the ECL sensor special properties. Apart from the high stability, it also presents good repeatability and high sensitivity to DA with a wide linear range from 0.06 to 1.6 μM. And a satisfactory detection limit of 0.028 μM (S/N = 3) was achieved for the prepared sensor. Furthermore, the ECL also shows high selectivity toward DA with an excellent interference resistance ability at a high concentration ratio of 100 (C_interference : C_DA = 100). In addition, the ECL sensor was successfully applied for effective detection and quantitative analysis of the actual dopamine in human body fluids for disease diagnosis and pathological studies.

CQDs were obtained from a POP derived porous carbon via nitric acid oxidation. CQDs/CG composite film with special properties were fabricated and used for ECL detection of DA in human body fluids.

Ti3C2 MXenes nanosheets catalyzed highly efficient electrogenerated chemiluminescence biosensor for the detection of exosomes

Exosomes have been reported to play an important role in the anti-tumor immune response, tumor diagnosis and other processes, and are promising biomarkers for early cancer diagnosis. In this work, a sensitive electrogenerated chemiluminescence (ECL) biosensor was developed for detection of exosomes using aptamer modified two-dimensional material Ti₃C₂ MXenes nanosheets as the ECL nanoprobe because of its large surface area, the excellent conductivity and catalytic properties. The exosomes can be high efficiently captured onto the electrode surface by an EpCAM protein recognized aptamer modified on the electrode surface. In addition, the ECL nanoprobe can also recognize the exosomes, and significantly enhanced the ECL signals of luminol. Based on this strategy, a highly sensitive ECL biosensor for MCF-7 exosomes detection was obtained. The detection limit is 125 particles μL^-1, which was over 100 times lower than that of conventional ELISA method. The as prepared ECL biosensor was performed successfully for MCF-7 exosomes detection in the serum. This strategy provided a feasible, sensitive and reliable tool for the exosomes detection in exosomes-related clinical diagnostics.

Quantitative SERS Detection of Dopamine in Cerebrospinal Fluid by Dual-Recognition-Induced Hot Spot Generation

Reliable profiling of the extracellular dopamine (DA) concentration in the central nervous system is essential for a deep understanding of its biological and pathological functions. However, quantitative determination of this neurotransmitter remains a challenge because of the extremely low concentration of DA in the cerebrospinal fluid (CSF) of patients. Herein, on the basis of the specific recognition of boronate toward diol and N-hydroxysuccinimide ester toward the amine group, a simple and highly sensitive strategy was presented for DA detection by using surface-enhanced Raman scattering (SERS) spectroscopy as a signal readout. This was realized by first immobilizing 3,3'-dithiodipropionic acid di( N-hydroxysuccinimide ester) on gold thin film surfaces to capture DA, followed by introducing 3-mercaptophenylboronic acid (3-MPBA)-functionalized silver nanoparticles to generate numerous plasmonic "hot spots" with the nanoparticle-on-mirror geometry. Such a dual-recognition mechanism not only avoids complicated bioelement-based manipulations but also efficiently decreases the background signal. With the direct use of the recognition probe 3-MPBA as a Raman reporter, the "signal-on" SERS method was employed to quantify the concentration of DA from 1 pM to 1 μM with a detection limit of 0.3 pM. Moreover, our dual-recognition-directed SERS assay exhibited a high resistance to cerebral interference and was successfully applied to monitoring of DA in CSF samples of patients.

Sensitive determination of dopamine levels via surface-enhanced Raman scattering of Ag nanoparticle dimers

Background

Dopamine (DA) is an important neurotransmitter in the hypothalamus and pituitary gland, which can produce a direct influence on mammals' emotions in midbrain. Additionally, the level of DA is highly related with some important neurologic diseases such as schizophrenia, Parkinson, and Huntington's diseases, etc. In light of the important roles that DA plays in the disease modulation, it is of considerable significance to develop a sensitive and reproducible approach for monitoring DA.

Purpose

The objective of this study was to develop an efficient approach to quantitatively monitor the level of DA using Ag nanoparticle (NP) dimers and enhanced Raman spectroscopy.

Methods

Ag NP dimers were synthesized for the sensitive detection of DA via surface-enhanced Raman scattering (SERS). Citrate was used as both the capping agent of NPs and sensing agent to DA, which is self-assembled on the surface of Ag NP dimers by reacting with the surface carboxyl group to form a stable amide bond. To improve accuracy and precision, the multiplicative effects model for surface-enhanced Raman spectroscopy was utilized to analyze the SERS assays.

Results

A low limits of detection (LOD) of 20 pM and a wide linear response range from 30 pM to 300 nM were obtained for DA quantitative detection. The SERS enhancement factor was theoretically valued at approximately 10⁷ by discrete dipole approximation. DA was self-assembled on the citrate capped surface of Ag NPs dimers through the amide bond. The adsorption energy was estimated to be 256 KJ/mol using the Langmuir isotherm model. The density functional theory was used to simulate the spectral characteristics of SERS during the adsorption of DA on the surface of the Ag dimers. Furthermore, to improve the accuracy and precision of quantitative analysis of SERS assays with a multiplicative effects model for surface-enhanced Raman spectroscopy.

Conclusion

A LOD of 20 pM DA-level was obtained, and the linear response ranged from 30 pM to 300 nM for quantitative DA detection. The absolute relative percentage error was 4.22% between the real and predicted DA concentrations. This detection scheme is expected to have good applications in the prevention and diagnosis of certain diseases caused by disorders in the DA level.

Fabrication of Amine-Modified Magnetite-Electrochemically Reduced Graphene Oxide Nanocomposite Modified Glassy Carbon Electrode for Sensitive Dopamine Determination

Amine-modified magnetite (NH₂-Fe₃O₄)/reduced graphene oxide nanocomposite modified glassy carbon electrodes (NH₂-Fe₃O₄/RGO/GCEs) were developed for the sensitive detection of dopamine (DA). The NH₂-Fe₃O₄/RGO/GCEs were fabricated using a drop-casting method followed by an electrochemical reduction process. The surface morphologies, microstructure and chemical compositions of the NH₂-Fe₃O₄ nanoparticles (NPs), reduced graphene oxide (RGO) sheets and NH₂-Fe₃O₄/RGO nanocomposites were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-Ray diffraction (XRD) and Fourier-transform infrared (FTIR) spectroscopy. The electrochemical behaviors of DA on the bare and modified GCEs were investigated in phosphate buffer solution (PBS) by cyclic voltammetry (CV). Compared with bare electrode and RGO/GCE, the oxidation peak current (i_pa) on the NH₂-Fe₃O₄/RGO/GCE increase significantly, owing to the synergistic effect between NH₂-Fe₃O₄ NPs and RGO sheets. The oxidation peak currents (i_pa) increase linearly with the concentrations of DA in the range of 1 × 10^-8 mol/L - 1 × 10^-7 mol/L, 1 × 10^-7 mol/L - 1 × 10^-6 mol/L and 1 × 10^-6 mol/L - 1 × 10^-5 mol/L. The detection limit is (4.0 ± 0.36) ×10^-9 mol/L (S/N = 3). Moreover, the response peak currents of DA were hardly interfered with the coexistence of ascorbic acid (AA) and uric acid (UA). The proposed NH₂-Fe₃O₄/RGO/GCE is successfully applied to the detection of dopamine hydrochloride injections with satisfactory results. Together with low cost, facile operation, good selectivity and high sensitivity, the NH₂-Fe₃O₄/RGO/GCEs have tremendous prospects for the detection of DA in various real samples.

A light-up imaging protocol for neutral pH-enhanced fluorescence detection of lysosomal neuraminidase activity in living cells

A lysosome-accessing nanoprobe is designed for recognition of lysosomal neuraminidases (Lyso-Neus), which can cleave the 4-methylumbelliferone moieties of the substrate from the nanoprobe, and lead to the escape of the moieties from acidic lysosomes into the neutral cytosol assisted by cationic poly(ethyleneimine) to light up the pH-responsive fluorescence for visual detection and dynamic tracking of Lyso-Neu activity in living cells.

Highly selective enzymatic-free electrochemical sensor for dopamine detection based on the self-assemblied film of a sandwich mixed (phthalocyaninato) (porphyrinato) europium derivative

An efficient enzymatic-free electrochemical sensor is firstly developed based on the self-assemblied film of a sandwich mixed (phthalocyaninato) (porphyrinato) europium(III) double-decker complex, Eu(Pc)[T(OH)PP], [Pc = phthalocyaninate, T(OH)PP = 5,10,15,tris (4-tert-butylphenyl)-20-(4-hydroxyphenyl)porphyrinate] prepared by using a solution-processing QLS method. The Eu(Pc)[T(OH)PP]semiconducting active layer on an ITO working electrode leads to a good sensing property for the detection of dopamine with an excellent selectivity, due to the high Eu(Pc)[T(OH)PP] molecular ordering/packing in the QLS film and more favorable interaction between the Eu(Pc)[T(OH)PP] and DA molecules. The amperometric responses are linearly proportional to the concentration of dopamine in the range of 8–100 [Formula: see text]M, with a low detection limit of 4.8 [Formula: see text]M and good sensitivity, indicating the great potential of electroactive tetrapyrrole rare earth sandwich type complexes in the field of nonenzymatic electrochemical sensors.

A review of electrogenerated chemiluminescent biosensors for assays in biological matrices

Electrogenerated chemiluminescence (ECL) is the production of light via electron transfer reactions between electrochemically produced reagents. ECL-based biosensors use specific biological interactions to recognize an analyte and produce a luminescent signal. Biosensors fabricated with novel biorecognition species have increased the number of analytes detected. Some of these analytes include peptides, cells, enzymes and nucleic acids. ECL biosensors are selective, simple, sensitive and have low detection limits. Traditional methods use ruthenium complexes or luminol to generate ECL. Nanomaterials can be incorporated into ECL biosensors to improve efficiency, but also represent a new class of ECL emitters. This article reviews the application of ruthenium complex, luminol and nanomaterial-based ECL biosensors to making measurements in biological matrices over the past 4 years.

A label-free aptasensor based on polyethyleneimine wrapped carbon nanotubes in situ formed gold nanoparticles as signal probe for highly sensitive detection of dopamine

Herein, a highly sensitive and selective aptamer biosensor for quantitative detection of a model target, dopamine (DA), was developed by using a gold (Au) electrode modified with highly dispersed gold nanoparticles (AuNPs) and acid-oxidized carbon nanotubes (CNTs-COOH) functionalized with polyethyleneimine (PEI). Amine-terminated12-mercaptureprobe (ssDNA1) as a capture probe and specific DA-aptamer (ssDNA2) as a detection probe was immobilized on the surface of a modified electrode via the formation of covalent amide bond and hybridization, respectively. Methylene blue (MB) was used as the redox probe, which was intercalated into the aptamer through the specific interaction with its guanine bases. In the presence of DA, the interaction between aptamer and DA displaced the MB from the electrode surface, rendering a lowered electrochemical signal attributed to decreased amount of adsorbed MB. The developed electrochemical DA aptasensor showed a good linear response to DA from 5 to 300nM with detection limit of 2.1nM. The biosensor also exhibited satisfactory selectivity and could be successfully used to detect DA in blood serum sample.

Quantum dots assisted laser desorption/ionization mass spectrometric detection of carbohydrates: qualitative and quantitative analysis

A quantum dots (QDs) assisted laser desorption/ionization mass spectrometric (QDA-LDI-MS) strategy was proposed for qualitative and quantitative analysis of a series of carbohydrates. The adsorption of carbohydrates on the modified surface of different QDs as the matrices depended mainly on the formation of hydrogen bonding, which led to higher MS intensity than those with conventional organic matrix. The effects of QDs concentration and sample preparation method were explored for improving the selective ionization process and the detection sensitivity. The proposed approach offered a new dimension to the application of QDs as matrices for MALDI-MS research of carbohydrates. It could be used for quantitative measurement of glucose concentration in human serum with good performance. The QDs served as a matrix showed the advantages of low background, higher sensitivity, convenient sample preparation and excellent stability under vacuum. The QDs assisted LDI-MS approach has promising application to the analysis of carbohydrates in complex biological samples.

Electrochemical Label-Free Aptasensor for Specific Analysis of Dopamine in Serum in the Presence of Structurally Related Neurotransmitters

Cellular and brain metabolism of dopamine can be correlated with a number of neurodegenerative disorders, and as such, in vivo analysis of dopamine in the presence of structurally related neurotransmitters (NT) represents a holy grail of neuroscience. Interference from those NTs generally does not allow selective electroanalysis of dopamine, which redox transformation overlaps with those of other catecholamines. In our previous work, we reported an electrochemical RNA-aptamer-based biosensor for specific analysis of dopamine (Analytical Chemistry, 2013; Vol. 85, p 121). However, the overall design of the biosensor restricted its stability and impeded its operation in serum. Here, we show that specific biorecognition and electroanalysis of dopamine in serum can be performed by the RNA aptamer tethered to cysteamine-modified gold electrodes via the alkanethiol linker. The stabilized dopamine aptasensor allowed continuous 20 h amperometric analysis of dopamine in 10% serum within the physiologically important 0.1-1 μM range and in the presence of catechol and such dopamine precursors and metabolites as norepinephrine and l-DOPA. In a flow-injection mode, the aptasensor response to dopamine was ∼1 s, the sensitivity of analysis, optimized by adjusting the aptamer surface coverage, was 67 ± 1 nA μM(-1) cm(-2), and the dopamine LOD was 62 nM. The proposed design of the aptasensor, exploiting both the aptamer alkanethiol tethering to the electrode and screening of the catecholamine-aptamer electrostatic interactions, allows direct monitoring of dopamine levels in biological fluids in the presence of competitive NT and thus may be further applicable in biomedical research.

Dual Reaction-Based Multimodal Assay for Dopamine with High Sensitivity and Selectivity Using Functionalized Gold Nanoparticles

A simple and dual chemical reaction-based multimodal assay for dopamine with high sensitivity and selectivity using two types of functionalized gold nanoparticles (FB-AuNPs/NsNHS-AuNPs), i.e. fluorescein modified gold nanoparticles (FB-AuNPs) and Nile blue modified gold nanoparticles (NsNHS-AuNPs), was successfully fabricated. This assay for dopamine presents colorimetric visualization and double channel fluorescence enhancement at 515 and 665 nm. The absorbance and fluorescence changes were linearly proportional to the amounts of dopamine in the range of nanomolar scale (5-100 nM). The detection limits for absorbance and fluorescence were as low as 1.2 nM and 2.9 nM (S/N = 3), respectively. Furthermore, the extent application of this multimodal assay has been successfully demonstrated in human urine samples with high reliability and applicability, showing remarkable promise in diagnostic purposes.

SERS-active Au@Ag nanorod dimers for ultrasensitive dopamine detection

Dopamine (DA) is a neurotransmitter which plays a key role in the life science. Self-assembled Au@Ag nanorod dimers based on aptamers were developed for ultrasensitive dopamine detection. The electronic field was significantly enhanced by the addition of silver shell coating on the surface of Au NR dimer. The results displayed that Au@Ag NR dimers were ideal building blocks for constructing the SERS substrates with prominent Raman enhancement effects. It was found that with using this Surface-enhanced Raman scattering (SERS)-encoded this sensing system, a limit of detection of 0.006 pM and a wide linear range of 0.01-10 pM for dopamine detection were obtained. Our work open up a new avenue for the diagnosis and drug-discovery programs.

An ON1–OFF–ON2 electrochemiluminescence response: combining the intermolecular specific binding with a radical scavenger

The electrochemiluminescence (ECL) technique was combined with the “ON¹–OFF–ON²” strategy based on the chemical reactions and specific binding among different small chemical compounds for the highly sensitive detection of nonelectroactive organophosphate pesticides.

Electrochemiluminescence sensor for dopamine with a dual molecular recognition strategy based on graphite-like carbon nitride nanosheets/3,4,9,10-perylenetetracarboxylic acid hybrids

Preparation of an ECL sensor and graphite-like carbon nitride nanosheets/3,4,9,10-perylenetetracarboxylic acid hybrids.