Structural characterization of methylenedianiline regioisomers by ion mobility-mass spectrometry, tandem mass spectrometry, and computational strategies: I. Electrospray spectra of 2-ring isomers

Direct Enantiomer Differentiation of Drugs and Drug-Like Compounds via Noncovalent Copper-Amino Acid Complexation and Ion Mobility-Mass Spectrometry

Drug enantiomers can possess vastly different pharmacological properties, yet they are identical in their chemical composition and structural connectivity. Thus, resolving enantiomers poses a great challenge in the field of separation science. Enantiomer separations necessitate interaction of the analyte with a chiral environment─in mass spectrometry-based analysis, a common approach is through a three-point interaction with a chiral selector commonly introduced during sample preparation. In select cases, the structural difference imparted through noncovalent complexation results in enantiomer-specific structural differences, facilitating measurement using a structurally selective analytical technique such as ion mobility-mass spectrometry (IM-MS). In this work, we investigate the direct IM-MS differentiation of chiral drug compounds using mononuclear copper complexes incorporating an amino acid chiral selector. A panel of 20 chiral drugs and drug-like compounds were investigated for separation, and four l-amino acids (l-histidine, l-tryptophan, l-proline, and l-tyrosine) were evaluated as chiral selectors (CS) to provide the chiral environment necessary for differentiation. Enantiomer differentiation was achieved for four chiral molecule pairs (R/S-thalidomide, R/S-baclofen, R/S-metoprolol, and d/l-panthenol) with two-peak resolution (Rp-p) values ranging from 0.7 (>10% valley) to 1.5 (baseline separation). Calibration curves relating IM peak areas to enantiomeric concentrations enabled enantiomeric excess quantitation of racemic thalidomide and metoprolol with residuals of 5.7 and 2.5%, respectively. Theoretical models suggest that CuII and l-histidine complexation around the analyte chiral center is important for gas-phase stereoselectivity. This study demonstrates the potential of combining enantioselective noncovalent copper complexation with structurally selective IM-MS for differentiating chiral drugs and drug-like compounds.

Differentiation of regioisomers of sulfobenzoic acid by traveling-wave ion mobility mass spectrometry

An ion mobility mass spectrometry (IM-MS) investigation using a Synapt G2 mass spectrometer was conducted to separate anions generated from the three regioisomers of sulfobenzoic acid. The results revealed that the differences in arrival time distributions (ATDs) were inadequate to differentiate the isomers unambiguously. However, the ATD profiles of the product ions, generated by fragmenting the respective mass-selected m/z 201 precursor ions in the Trap region of the three-compartment traveling-wave ion guide of the Synapt G2 mass spectrometer, were distinctly different, enabling definitive differentiation of the isomers. An arrival-time peak for an ion of m/z 157 resulting from the loss of CO2 from the respective precursors was common to all three mobilograms. However, only the profile recorded from the para-isomer exhibited a unique arrival-time peak for an ion of m/z 137, originating from an SO2 loss. Such a peak corresponding to an SO2 loss was absent in the ATD profiles of the ortho- and meta-isomers. Additionally, the mobilogram of the meta-isomer displayed a unique peak at 3.42 ms. Based on its product ion spectrum, this peak was attributed to the bisulfite anion (m/z 81; HSO3-). Previously, this meta-isomer specific m/z 81 ion had been proposed to originate from a two-step process involving the intermediacy of an m/z 157 ion formed by CO2 loss. However, our detailed tandem mass spectrometric experiments suggest that the m/z 81 is not a secondary product but rather an ion that originated from a direct elimination of a benzyne derivative from the m/z 201 precursor ion.

Ion Mobility-Mass Spectrometry Strategies to Elucidate the Anhydrous Structure of Noncovalent Guest/Host Complexes

Structural mass spectrometry (MS) techniques are fast and sensitive analytical methods to identify noncovalent guest/host complexation phenomena for desirable solution-phase properties. Current MS-based studies on guest/host complexes of drug and drug-like molecules are sparse, and there is limited guidance on how to interpret MS information in the context of host nanoencapsulation and inclusion. Here, we use structural MS strategies, combining energy-resolved MS (ERMS), ion mobility-MS (IM-MS), and computational modeling, to characterize 14 chemically distinct drug and drug-like compounds for their propensity to form guest/host complexes with the widely used excipient, beta-cyclodextrin (βCD). The majority (11/14) yielded a 1:1 guest/host complex, and ion mobility collision cross section (CCS) analysis provided subtle evidence of gas-phase compaction of complexes in both polarities. The three distinct dissociation channels observed in ERMS (i.e., charged βCD, charged guest, and partial guest loss) were used to direct charge-site assignments for computational modeling, and structural candidates were prioritized using helium-derived CCS measurements combined with root-mean-square distance analysis. The combined analytical information from ERMS, IM-MS, and computational modeling suggested that the majority of anhydrous complexes are inclusion complexes with βCD. Taken together, this work demonstrates a roadmap for how multiple MS-based analytical measurements can be combined to interpret the structures that guest/host complexes adopt in the absence of water.

Model-Assisted Interpretation of 4,4'-Methylene Dianiline Adsorption on Soils at Micromolar Concentrations

Adsorption kinetics and isotherms were determined for 4,4'-methylene dianiline (MDA) on five diverse soils at nominal concentrations of 0.01-1.0 mg L-1 (nominal soil loading 0.1-40 μg gs -1 ). The data were used to model the adsorption process based on the two-step mechanism that is characteristic of the adsorption of aromatic amines, consisting of a physical equilibrium between the aqueous phase and the soil organic matter and a chemical reaction between the adsorbed MDA and reactive sites in the soil organic matter. Generic parameters were determined that enabled application of the model to other soils, which was checked against previously published data for MDA adsorption. At the low concentrations evaluated, the adsorption process took place almost exclusively in the organic matter without the need to account for a separate ion exchange process with the soil mineral fraction. Physical adsorption was found to be mainly dependent on the protonation state of MDA and increased with decreasing pH of the soils. Because of the chemical reaction taking place, adsorption equilibrium constants (organic-carbon partition coefficient [KOC ]) normalized to the organic carbon content in the soil gradually increased with time; and it was demonstrated that, at steady-state conditions, values of log KOC  > 3.5 can be expected for most any soil at conservatively estimated potential environmental MDA concentrations. Environ Toxicol Chem 2023;42:2580-2588. © 2023 SETAC.

Noncovalent Host-Guest Complexes of Artemisinin with α-, β-, and γ- Cyclodextrin Examined by Structural Mass Spectrometry Strategies

Cyclodextrins (CDs) are a family of macrocyclic oligosaccharides with amphiphilic properties, which can improve the stability, solubility, and bioavailability of therapeutic compounds. There has been growing interest in the advancement of efficient and reliable analytical methods that assist with elucidating CD host-guest drug complexation. In this study, we investigate the noncovalent ion complexes formed between naturally occurring dextrins (αCD, βCD, γCD, and maltohexaose) with the poorly water-soluble antimalarial drug, artemisinin, using a combination of ion mobility-mass spectrometry (IM-MS), tandem MS/MS, and theoretical modeling approaches. This study aims to determine if the drug can complex within the core dextrin cavity forming an inclusion complex or nonspecifically bind to the periphery of the dextrins. We explore the use of group I alkali earth metal additives to promote the formation of various noncovalent gas-phase ion complexes with different drug/dextrin stoichiometries (1:1, 1:2, 1:3, 1:4, and 2:1). Broad IM-MS collision cross section (CCS) mapping (n > 300) and power-law regression analysis were used to confirm the stoichiometric assignments. The 1:1 drug:αCD and drug:βCD complexes exhibited strong preferences for Li+ and Na+ charge carriers, whereas drug:γCD complexes preferred forming adducts with the larger alkali metals, K⁺, Rb⁺, and Cs⁺. Although the ion-measured CCS increased with cation size for the unbound artemisinin and CDs, the 1:1 drug:dextrin complexes exhibit near-identical CCS values regardless of the cation, suggesting these are inclusion complexes. Tandem MS/MS survival yield curves of the [artemisinin:βCD + X]⁺ ion (X = H, Li, Na, K) showed a decreased stability of the ion complex with increasing cation size. Empirical CCS measurements of the [artemisinin:βCD + Li]⁺ ion correlated with predicted CCS values from the low-energy theoretical structures of the drug incorporated within the βCD cavity, providing further evidence that gas-phase inclusion complexes are formed in these experiments. Taken together, this work demonstrates the utility of combining analytical information from IM-MS, MS/MS, and computational approaches in interpreting the presence of gas-phase inclusion phenomena.

Tautomers and Rotamers of Curcumin: A Combined UV Spectroscopy, High-Performance Liquid Chromatography, Ion Mobility Mass Spectrometry, and Electronic Structure Theory Study

The structures of tautomers and rotameric forms of curcumin, the bioactive compound present in spice plant turmeric, have been investigated using ion mobility mass spectrometry (IMMS) in conjunction with high-performance liquid chromatography (HPLC) and UV-visible spectroscopy. Two tautomeric forms of this β-diketone compound, keto-enol and diketo, have been chromatographically separated, and the electronic absorption spectra for these two tautomeric forms in methanol solution have been recorded separately for the first time. The molecular identity of the HPLC-separated solution fractions is established unambiguously by recording the mass and fragmentation spectra simultaneously. The ion mobility spectrum for the deprotonated curcumin anion, [Cur-H]^-, corresponding to the diketo tautomer, displays only one peak (P), and the collision cross-section (CCS) value is measured to be 185.9 Ų. However, the ion mobility spectrum corresponding to the HPLC-separated keto-enol tautomer shows three distinctly separated peaks, P, Q, and R, with CCS values of 185.9, 194.8, and 203.4 Ų, respectively, whereby peak R appears to be the most intense one, followed by peaks P and Q. The theoretically calculated CCS values of different isomers of [Cur-H]^-, optimized by electronic structure theory methods, display satisfactory correlation with the experimentally observed values, corroborating our assignments. The spectral attributes also indicate the occurrence of structural rearrangements in the electrospray ionization process. With the aid of the electronic structure calculation, low-energy pathways for the occurrence of the structural isomerization to surpass the energy barrier are suggested, which are consistent with the assignments of the peaks observed in the IM spectra.

Mass spectrometry and ion mobility study of poly(ethylene glycol)-based polyurethane oligomers

RATIONALE

Commercial-grade polymer synthesis is performed via melt polymerization, which leads to polydispersion. The work reported herein provides a synthetic strategy to produce mono-dispersive polyurethane oligomers and an analytical strategy to distinguish these oligomers, providing chemists with the tools necessary to synthesize and identify specific polymer structures that exhibit a desired property.

METHODS

Three isomeric poly(ethylene glycol)-polyurethane (PEG-PUR) oligomers were synthesized and analyzed via flow-injection ion mobility mass spectrometry (IM-MS). Each polymer oligomer was injected and run independently via flow injection at 100 μL•min^-1 and analyzed in positive ion mode on a drift tube quadrupole time-of-flight (QTOF) instrument. Mobility measurements were determined using a single-field approach. For tandem mass spectrometry (MS/MS) experiments, the sodium-adducted singly charged precursor ion was isolated in the quadrupole and subjected to a range of collision energies.

RESULTS

In MS experiments, both +1 and +2 sodium-adducted species were observed for each oligomer at m/z 837.4 and 430.2, respectively. When isolated and fragmented via MS/MS, the +1 precursor yielded distinct product ions for each of the three isomeric oligomers. Fragmentation generally occurred at urethane linkages via 1,3- and 1,5-H shift mechanisms. IM was also used to distinguish the three isomers, with greater IM separation observed for the +2 versus the +1 species.

CONCLUSIONS

Mono-disperse PEG-PUR oligomers were synthesized and analyzed. Although the polymeric oligomers analyzed in this study are quite small and structurally simple, this work serves as a model system for the synthesis and structural characterization of larger, more complex block copolymers.

Isomers and Rotamers of DCM in Methanol and in Gas Phase Probed by Ion Mobility Mass Spectrometry in Combination with High Performance Liquid Chromatography

An integrated method of ion mobility mass spectrometry and high-performance liquid chromatography (HPLC) has been used to investigate the isomeric distribution of a popular fluorescent dye DCM (4-(dicyanomethylene)-2-methyl-6-(4-dimethylaminostyryl)-4H-pyran) in methanol solution. Chromatographic separation of DCM isomers in methanol has been performed by probing the molecular mass (DCMH⁺), and two distinctly separated peaks are observed at retention times 3.73 (peak-I) and 3.87 (peak-II) min, where the latter one appears nearly twice as intense as the former. However, peak-I appears much weaker compared to peak-II if the chromatogram is recorded by optical probing at the absorption maximum of this dye (467 nm). The ion mobility (IM) spectra of DCMH⁺ ions corresponding to each of the LC-separated factions show three common peaks A, B, and C, with collision cross-section (CCS) values of 174, 185, and 197 Ų, respectively, but their relative intensities in the two IM spectra appear in opposite sequences. The three IM peaks have been assigned by considering the theoretically calculated CCS values of 13 possible isomers of DCMH⁺ ions. The IM spectral features also reveal that isomeric interconversions occur during the ESI process. Electronic structure calculations have been used to optimize the geometries of the four isomers of solvated DCM and the corresponding protomeric structures of DCMH⁺. The isomerization pathways and associated energy barriers have also been calculated. The gas-phase protomers are found to follow a completely different sequence of stability as compared to the neutral isomers. The analysis reveals that peak-I corresponds to one of the cis isomers, whereas peak-II arises due to cumulative contributions of the other three isomers. The absorption spectrum of DCM in methanol is simulated from the computed spectral profiles of the isomers which indicates a distribution of trans1, trans2, cis1, and cis2 isomers as 33.5, 61.5, 2.0, and 3.0%, respectively. The fragmentation behavior of DCMH⁺ ions in a collision-induced dissociation experiment has been found to be isomer dependent.

Mass Spectrometry of Polyurethanes

This review covers the applications of mass spectrometry (MS) and its hyphenated techniques to characterize polyurethane (PU) synthetic polymers and their respective hard and soft segments. PUs are commonly composed of hard segments including methylene bisphenyl diisocyanate (MDI) and toluene diisocyanate (TDI), and soft segments including polyester and polyether polyols. This literature review highlights MS techniques such as electrospray ionization (ESI), matrix assisted laser/desorption ionization (MALDI), ion mobility-mass spectrometry (IM-MS), and computational methods that have been used for the characterization of this polymer system. Here we review specific case studies where MS techniques have elucidated unique features pertaining to the makeup and structural integrity of complex PU materials and PU precursors.

Structural Analysis of Polyurethane Monomers by Pyrolysis GC TOFMS via Dopant-Assisted Atmospheric Pressure Chemical Ionization

Polyurethane is one of the most widely used copolymers and is formed by the cross-linking of isocyanates and polyols. Its physical properties have a strong dependence on the monomer structures, making it very important to characterize the monomers in polyurethane. In this study, we developed a method to analyze unknown polyurethane samples using pyrolysis gas chromatography time-of-flight mass spectrometry (Py-GC-TOFMS) with dopant-assisted atmospheric pressure chemical ionization (dAPCI). A set of standard polyurethane foams produced with several different monomers are analyzed by Py-GC-TOFMS. GC-dAPCI-TOFMS is a high-resolution, soft ionization method for GC-MS analysis that provides accurate mass information of GC separated molecules. The data obtained by this approach could effectively classify different monomers using principal component analysis (PCA), grouping polymers with the same monomers, and providing structural features significant to each monomer. Furthermore, characteristic compounds are identified using in-source collision-induced dissociation (CID) and CSI:FingerID analysis. In contrast, the same set of samples analyzed by Py-GC-electron ionization (EI)-MS could only partially separate some of the monomers. Graphical Abstract .

Alkali Metal Cation Adduct Effect on Polybutylene Adipate Oligomers: Ion Mobility-Mass Spectrometry

Polyurethane (PU) di-block copolymers are one of the most versatile polymeric materials, comprised of hard and soft segments that contribute to PU's broad range of applications. Polybutylene adipate (PBA) is a commonly used soft segment in PU systems. Characterizing the structure of PBA polymers is essential to understanding complex heterogeneity within a PU sample. In this study, ion mobility-mass spectrometry (IM-MS) and tandem mass spectrometry (MS/MS) are used to structurally characterize a PBA standard (Mn = 2250) adducted with a combination of monovalent alkali cations (Li, Na, K, Rb, and Cs). IM-MS profiles show unique trends associated with each cation-adducted PBA sample. Charge state trends: +1, +2, and +3 were extracted for cation-adducted PBA oligomers, and investigated to study gas-phase transitional folding. To quantitatively assess the gas-phase structural similarities and differences, a statistical test (ANOVA) was used to compare PBA oligomer-cation collisional cross sections (CCS). Fragmentation studies (MS/MS) identified the unique behavior of Li and Na for promoting 1,5 H-shift and 1,3 H-shift fragmentation, whereas the PBA precursor preferentially loses the larger K, Rb, and Cs cations as the ion activation energy is increased. The combination of adducted alkali cations, IM-MS, and MS/MS allow for unique structural characterization of this important PBA system.

LC-UV-MS and MS/MS Characterize Glutathione Reactivity with Different Isomers (2,2' and 2,4' vs. 4,4') of Methylene Diphenyl-Diisocyanate

Methylene diphenyl diisocyanate (MDI), the most abundantly produced diisocyanate worldwide, is among the best recognized chemical causes of occupational asthma. The bulk of synthesized MDI, the 4,4' isomer, has been the focus of most biochemical research to date. The biological reactivity of other MDI isomers (2,2' and 2,4'), present at concentrations approaching 50% in some commercial products, remains less clear. We hypothesized 2,2' and 2,4' MDI react with glutathione (GSH), a major anti-oxidant of the lower airways, similarly to 4,4' MDI, and that the products could be characterized using a combination of LC-UV-MS and MS/MS. Purified 2,2' and 2,4' MDI isomers were mixed with GSH in pH-buffered aqueous phase at 37°C and reaction products were analyzed at varying time points. Within minutes, S-linked bis(GSH)-MDI conjugates were detectable as the dominant [M+H]⁺ ion, with an 865.25 m/z and more intense [M+2H]²⁺ ions of the same nominal mass. Upon longer reaction, [M+H]+ ions with greater retention times and the 558.17 m/z expected for mono(GSH)-MDI reaction products were observed, and exhibited MS/MS collision-induced dissociation (CID)-fragmentation patterns consistent with cyclized structures. Compared with 4,4' MDI, 2,2' and 2,4' isomers exhibit similar rapid reactivity with GSH and formation of bis(GSH)-MDI conjugates, but greater formation of cyclized mono(GSH) conjugates following extended reaction times (10 minutes to 2 hours). Further translational studies will be required to determine if the present in vitro findings extend to the complex lower airway microenvironment in vivo.

Construction and Application of a Database for a Five-Dimensional Identification of Natural Compounds in Garcinia Species by Means of UPLC-ESI-TWIMS-TOF-MS: Introducing Gas Phase Polyphenol Conformer Drift Time Distribution Intensity Ratios

Thirty-four reference compounds from G. buchananii were analyzed by means of UPLC-ESI-IMS-TOF-MS to build a database consisting of retention time, accurate m/ z of precursors and fragment ions, and rotationally averaged collision cross-sectional area (CCS). The CCS value of six selected compounds analyzed in bark extract in different concentrations and solvent systems showed excellent intra- and interday precision (RSD ≤ 0.9%). The established database was applied on different organs of G. buchananii as well as G. kola, G. mangostana, and G. cambogia enabling a fast and reliable identification of these natural bioactives. For several compounds, more than one drift time species could be highlighted, which we propose to be hydrogen bond stabilized rotational isomers transferred from solution to gas phase. We used all CCS values of one compound, and we propose to add also the intensity ratio of the conformers as a new and additional characteristic compound parameter in compound identification/screening/database applications to reduce dereplication and false positives and to strengthen the identification.

Structural Characterization of Methylenedianiline Regioisomers by Ion Mobility-Mass Spectrometry and Tandem Mass Spectrometry. 4. 3-Ring and 4-Ring Isomers

Matrix-assisted laser desorption/ionization-mass spectrometry (MALDI-MS) is used to characterize methylenedianiline (MDA) 3-ring and 4-ring species. Building on our previous MALDI-MS 2-ring MDA isomer study, here we compare 3-ring and 4-ring electrospray ionization (ESI) and MALDI results. In ESI, 3-ring and 4-ring MDAs each form a single [M + H]⁺ parent ion. However, in MALDI, each MDA multimer forms three unique precursor ions: [M + H]⁺, [M^•]⁺, and [M - H]⁺. In this study, 3-ring and 4-ring MDA precursors are characterized to identify the unique fragment ions formed and their respective fragmentation pathways. In addition to the three possible precursors, the 3-ring and 4-ring species are higher-order oligomer precursors in polyurethane (PUR) production and thus provide additional insight into the polymeric behavior of these PUR hard block precursors. The combination of ion mobility-mass spectrometry (IM - MS) and tandem mass spectrometry (MS/MS) allow the structural characterization of these larger MDA multimers.

Structural Characterization of Methylenedianiline Regioisomers by Ion Mobility-Mass Spectrometry, Tandem Mass Spectrometry, and Computational Strategies. 3. MALDI Spectra of 2-Ring Isomers

Characterization of methylenedianiline (MDA) 2-ring isomers (2,2'-, 2,4'-, and 4,4'-MDA) is reported using matrix assisted laser desorption/ionization-mass spectrometry (MALDI-MS), a common technique used for characterizing synthetic polymers. MDA is a precursor to methylene diphenyl diisocyanate (MDI), a hard block component in polyurethane (PUR) synthesis. This work focuses on comparing MALDI results to those of our previous electrospray ionization-mass spectrometry (ESI-MS) studies. In ESI, 2-ring MDA isomers formed single unique [M + H]⁺ (199 Da) parent ions, whereas in MALDI each isomer shows significant formation of three precursor ions: [M - H]⁺ = 197 Da, [M^•]⁺ = 198 Da, and [M + H]⁺ = 199 Da. Structures and schemes are proposed for the MALDI fragment ions associated with each precursor ion. Ion mobility-mass spectrometry (IM-MS), tandem mass spectrometry (MS/MS), and computational methods were all critical in determining the structures for both precursor and fragment ions as well as the fragmentation mechanisms. The present study indicates that the [M - H]⁺ and [M^•]⁺ ions are formed by the MALDI process, explaining why they were not observed with ESI.

Large-Scale Structural Characterization of Drug and Drug-Like Compounds by High-Throughput Ion Mobility-Mass Spectrometry

Ion mobility-mass spectrometry (IM-MS) can provide orthogonal information, i.e., m/z and collision cross section (CCS), for the identification of drugs and drug metabolites. However, only a small number of CCS values are available for drugs, which limits the use of CCS as an identification parameter and the assessment of structure–function relationships of drugs using IM-MS. Here, we report the development of a rapid workflow for the measurement of CCS values of a large number of drug or drug-like molecules in nitrogen on the widely available traveling wave IM-MS (TWIM-MS) platform. Using a combination of small molecule and polypeptide CCS calibrants, we successfully determined the nitrogen CCS values of 1425 drug or drug-like molecules in the MicroSource Discovery Systems’ Spectrum Collection using flow injection analysis of 384-well plates. Software was developed to streamline data extraction, processing, and calibration. We found that the overall drug collection covers a wide CCS range for the same mass, suggesting a large structural diversity of these drugs. However, individual drug classes appear to occupy a narrow and unique space in the CCS–mass 2D spectrum, suggesting a tight structure–function relationship for each class of drugs with a specific target. We observed bimodal distributions for several antibiotic species due to multiple protomers, including the known fluoroquinolone protomers and the new finding of cephalosporin protomers. Lastly, we demonstrated the utility of the high-throughput method and drug CCS database by quickly and confidently confirming the active component in a pharmaceutical product.

Distinct Fragmentation Pathways of Anticancer Drugs Induced by Charge-Carrying Cations in the Gas Phase

With the growth of the pharmaceutical industry, structural elucidation of drugs and derivatives using tandem mass spectrometry (MS²) has become essential for drug development and pharmacokinetics studies because of its high sensitivity and low sample requirement. Thus, research seeking to understand fundamental relationships between fragmentation patterns and precursor ion structures in the gas phase has gained attention. In this study, we investigate the fragmentation of the widely used anticancer drugs, doxorubicin (DOX), vinblastine (VBL), and vinorelbine (VRL), complexed by a singly charged proton or alkali metal ion (Li⁺, Na⁺, K⁺) in the gas phase. The drug-cation complexes exhibit distinct fragmentation patterns in tandem mass spectra as a function of cation size. The trends in fragmentation patterns are explicable in terms of structures derived from ion mobility mass spectrometry (IM-MS) and theoretical calculations. Graphical Abstract ᅟ.

Ion Mobility Collision Cross Section Compendium

In this review, we focus on an important aspect of ion mobility (IM) research, namely the reporting of quantitative ion mobility measurements in the form of the gas-phase collision cross section (CCS), which has provided a common basis for comparison across different instrument platforms and offers a unique form of structural information, namely size and shape preferences of analytes in the absence of bulk solvent. This review surveys the over 24,000 CCS values reported from IM methods spanning the era between 1975 to 2015, which provides both a historical and analytical context for the contributions made thus far, as well as insight into the future directions that quantitative ion mobility measurements will have in the analytical sciences. The analysis was conducted in 2016, so CCS values reported in that year are purposely omitted. In another few years, a review of this scope will be intractable, as the number of CCS values which will be reported in the next three to five years is expected to exceed the total amount currently published in the literature.

Investigation of the Complete Suite of the Leucine and Isoleucine Isomers: Toward Prediction of Ion Mobility Separation Capabilities

In this study we investigated 11 isomers with the molecular formula C₆H₁₃NO₂ (m/z 131) to ascertain the potential of utilizing drift tube ion mobility mass spectrometry to aid in the separation of isomeric mixtures. This study of small molecules provides a detailed examination of the application of uniform field ion mobility for a narrow scope of isomers with variations in both bond coordination and stereochemistry. For small molecules, it was observed that in general constitutional isomers are more readily separated by uniform field mobility in comparison to stereoisomers such as enantiomers or diastereomers. Diastereomers exhibited differences in their collision cross section (CCS), but were unresolvable in a mixture, whereas the enantiomers studied did not exhibit statistically different CCS values. A mathematical relationship relating the CCS to resolving power was developed in order to predict the required ion mobility resolving power needed to separate the various isomer classes. For the majority of isomers evaluated in this study, a uniform field-based resolving power of 100 was predicted to be sufficient to resolve over half (∼60%) of all hypothetical isomer pairs, including leucine and isoleucine, whereas their stereoisomers (d- and l-forms) are predicted to be significantly more challenging, if not impossible, to separate by conventional drift tube techniques.

Determination of ion mobility collision cross sections for unresolved isomeric mixtures using tandem mass spectrometry and chemometric deconvolution

Ion mobility (IM) is an important analytical technique for determining ion collision cross section (CCS) values in the gas-phase and gaining insight into molecular structures and conformations. However, limited instrument resolving powers for IM may restrict adequate characterization of conformationally similar ions, such as structural isomers, and reduce the accuracy of IM-based CCS calculations. Recently, we introduced an automated technique for extracting "pure" IM and collision-induced dissociation (CID) mass spectra of IM overlapping species using chemometric deconvolution of post-IM/CID mass spectrometry (MS) data [J. Am. Soc. Mass Spectrom., 2014, 25, 1810-1819]. Here we extend those capabilities to demonstrate how extracted IM profiles can be used to calculate accurate CCS values of peptide isomer ions which are not fully resolved by IM. We show that CCS values obtained from deconvoluted IM spectra match with CCS values measured from the individually analyzed corresponding peptides on uniform field IM instrumentation. We introduce an approach that utilizes experimentally determined IM arrival time (AT) "shift factors" to compensate for ion acceleration variations during post-IM/CID and significantly improve the accuracy of the calculated CCS values. Also, we discuss details of this IM deconvolution approach and compare empirical CCS values from traveling wave (TW)IM-MS and drift tube (DT)IM-MS with theoretically calculated CCS values using the projected superposition approximation (PSA). For example, experimentally measured deconvoluted TWIM-MS mean CCS values for doubly-protonated RYGGFM, RMFGYG, MFRYGG, and FRMYGG peptide isomers were 288.8 Å(2), 295.1 Å(2), 296.8 Å(2), and 300.1 Å(2); all four of these CCS values were within 1.5% of independently measured DTIM-MS values.

Gated Trapped Ion Mobility Spectrometry Coupled to Fourier Transform Ion Cyclotron Resonance Mass Spectrometry

Analysis of molecules by ion mobility spectrometry coupled with mass spectrometry (IMS-MS) provides chemical information on the three dimensional structure and mass of the molecules. The coupling of ion mobility to trapping mass spectrometers has historically been challenging due to the large differences in analysis time between the two devices. In this paper we present a modification of the trapped ion mobility (TIMS) analysis scheme termed "Gated TIMS" that allows efficient coupling to a Fourier Transform Ion Cyclotron Resonance (FT-ICR) analyzer. Analyses of standard compounds and the influence of source conditions on the TIMS distributions produced by ion mobility spectra of labile ubiquitin protein ions are presented. Ion mobility resolving powers up to 100 are observed. Measured collisional cross sections of ubiquitin ions are in excellent qualitative and quantitative agreement to previous measurements. Gated TIMS FT-ICR produces results comparable to those acquired using TIMS/time-of-flight MS instrument platforms as well as numerous drift tube IMS-MS studies published in the literature.

Structural Characterization of Methylenedianiline Regioisomers by Ion Mobility-Mass Spectrometry, Tandem Mass Spectrometry, and Computational Strategies. 2. Electrospray Spectra of 3-Ring and 4-Ring Isomers

Building on results from our previous study of 2-ring methylenedianiline (MDA), a combined mass spectrometry approach utilizing ion mobility-mass spectrometry (IM-MS) and tandem mass spectrometry (MS/MS) coupled with computational methods enables the structural characterization of purified 3-ring and 4-ring MDA regioisomers in this current study. The preferred site of protonation for the 3-ring and 4-ring MDA was determined to be on the amino groups. Additionally, the location of the protonated amine along the MDA multimer was found to influence the gas phase stability of these molecules. Fragmentation mechanisms similar to the 2-ring MDA species were observed for both the 3-ring and 4-ring MDA. The structural characterization of 3-ring and 4-ring MDA isomers using modern MS techniques may aid polyurethane synthesis by the characterization of industrial grade MDA, multimeric MDA species, and methylene diphenyl diisocyanate (MDI) mixtures.

Fundamentals of trapped ion mobility spectrometry

Trapped ion mobility spectrometry (TIMS) is a relatively new gas-phase separation method that has been coupled to quadrupole orthogonal acceleration time-of-flight mass spectrometry. The TIMS analyzer is a segmented rf ion guide wherein ions are mobility-analyzed using an electric field that holds ions stationary against a moving gas, unlike conventional drift tube ion mobility spectrometry where the gas is stationary. Ions are initially trapped, and subsequently eluted from the TIMS analyzer over time according to their mobility (K). Though TIMS has achieved a high level of performance (R > 250) in a small device (<5 cm) using modest operating potentials (<300 V), a proper theory has yet to be produced. Here, we develop a quantitative theory for TIMS via mathematical derivation and simulations. A one-dimensional analytical model, used to predict the transit time and theoretical resolving power, is described. Theoretical trends are in agreement with experimental measurements performed as a function of K, pressure, and the axial electric field scan rate. The linear dependence of the transit time with 1/K provides a fundamental basis for determination of reduced mobility or collision cross section values by calibration. The quantitative description of TIMS provides an operational understanding of the analyzer, outlines the current performance capabilities, and provides insight into future avenues for improvement.