Potentiometric aptasensing of Listeria monocytogenes using protamine as an indicator

Modern Potentiometric Biosensing Based on Non-Equilibrium Measurement Techniques

Modern potentiometric sensors based on polymeric membrane ion-selective electrodes (ISEs) have achieved new breakthroughs in sensitivity, selectivity, and stability and have extended applications in environmental surveillance, medical diagnostics, and industrial analysis. Moreover, nonclassical potentiometry shows promise for many applications and opens up new opportunities for potentiometric biosensing. Here, we aim to provide a concept to summarize advances over the past decade in the development of potentiometric biosensors with polymeric membrane ISEs. This Concept article articulates sensing mechanisms based on non-equilibrium measurement techniques. In particular, we emphasize new trends in potentiometric biosensing based on attractive dynamic approaches. Representative examples are selected to illustrate key applications under zero-current conditions and stimulus-controlled modes. More importantly, fruitful information obtained from non-equilibrium measurements with dynamic responses can be useful for artificial intelligence (AI). The combination of ISEs with advanced AI techniques for effective data processing is also discussed. We hope that this Concept will illustrate the great possibilities offered by non-equilibrium measurement techniques and AI in potentiometric biosensing and encourage further innovations in this exciting field.

Electrochemical Biosensors as a Novel Platform in the Identification of Listeriosis Infection

Listeria monocytogenes (L.M.) is a gram-positive bacillus with wide distribution in the environment. This bacterium contaminates water sources and food products and can be transmitted to the human population. The infection caused by L.M. is called listeriosis and is common in pregnant women, immune-deficient patients, and older adults. Based on the released statistics, listeriosis has a high rate of hospitalization and mortality; thus, rapid and timely detection of food contamination and listeriosis cases is necessary. During the last few decades, biosensors have been used for the detection and monitoring of varied bacteria species. These devices are detection platforms with great sensitivity and low detection limits. Among different types of biosensors, electrochemical biosensors have a high capability to circumvent several drawbacks associated with the application of conventional laboratory techniques. In this review article, different electrochemical biosensor types used for the detection of listeriosis were discussed in terms of actuators, bioreceptors, specific working electrodes, and signal amplification. We hope that this review will facilitate researchers to access a complete and comprehensive template for pathogen detection based on the different formats of electrochemical biosensors.

Aptamer-based rapid diagnosis for point-of-care application

Aptasensors have attracted considerable interest and widespread application in point-of-care testing worldwide. One of the biggest challenges of a point-of-care (POC) is the reduction of treatment time compared to central facilities that diagnose and monitor the applications. Over the past decades, biosensors have been introduced that offer more reliable, cost-effective, and accurate detection methods. Aptamer-based biosensors have unprecedented advantages over biosensors that use natural receptors such as antibodies and enzymes. In the current epidemic, point-of-care testing (POCT) is advantageous because it is easy to use, more accessible, faster to detect, and has high accuracy and sensitivity, reducing the burden of testing on healthcare systems. POCT is beneficial for daily epidemic control as well as early detection and treatment. This review provides detailed information on the various design strategies and virus detection methods using aptamer-based sensors. In addition, we discussed the importance of different aptamers and their detection principles. Aptasensors with higher sensitivity, specificity, and flexibility are critically discussed to establish simple, cost-effective, and rapid detection methods. POC-based aptasensors' diagnostic applications are classified and summarised based on infectious and infectious diseases. Finally, the design factors to be considered are outlined to meet the future of rapid POC-based sensors.

Aptamer-Based Technologies for Parasite Detection

Centuries of scientific breakthroughs have brought us closer to understanding and managing the spread of parasitic diseases. Despite ongoing technological advancements in the detection, treatment, and control of parasitic illnesses, their effects on animal and human health remain a major concern worldwide. Aptamers are single-stranded oligonucleotides whose unique three-dimensional structures enable them to interact with high specificity and affinity to a wide range of targets. In recent decades, aptamers have emerged as attractive alternatives to antibodies as therapeutic and diagnostic agents. Due to their superior stability, reusability, and modifiability, aptamers have proven to be effective bioreceptors for the detection of toxins, contaminants, biomarkers, whole cells, pathogens, and others. As such, they have been integrated into a variety of electrochemical, fluorescence, and optical biosensors to effectively detect whole parasites and their proteins. This review offers a summary of the various types of parasite-specific aptamer-based biosensors, their general mechanisms and their performance.

Aptamer-based NanoBioSensors for seafood safety

Chemical and biological contaminants are of primary concern in ensuring seafood safety. Rapid detection of such contaminants is needed to keep us safe from being affected. For over three decades, immunoassay (IA) technology has been used for the detection of contaminants in seafood products. However, limitations inherent to antibody generation against small molecular targets that cannot elicit an immune response, along with the instability of antibodies under ambient conditions greatly limit their wider application for developing robust detection and monitoring tools, particularly for non-biomedical applications. As an alternative, aptamer-based biosensors (aptasensors) have emerged as a powerful yet robust analytical tool for the detection of a wide range of analytes. Due to the high specificity of aptamers in recognising targets ranging from small molecules to large proteins and even whole cells, these have been suggested to be viable molecular recognition elements (MREs) in the development of new diagnostic and biosensing tools for detecting a wide range of contaminants including heavy metals, antibiotics, pesticides, pathogens and biotoxins. In this review, we discuss the recent progress made in the field of aptasensors for detection of contaminants in seafood products with a view of effectively managing their potential human health hazards. A critical outlook is also provided to facilitate translation of aptasensors from academic laboratories to the mainstream seafood industry and consumer applications.

A novel electrochemical sandwich-like immunosensor based on carboxyl Ti3C2Tx MXene and rhodamine b/gold/reduced graphene oxide for Listeria monocytogenes

Listeria monocytogenes (LM) is one of the most common food-borne pathogens and can induce a series of diseases with a high mortality rate to humans; hence, it is very necessary to develop a highly sensitive method for LM detection. Based on this need, a new sandwich-like electrochemical immunosensing platform was developed herein by preparing carboxyl Ti₃C₂T_x MXene (C-Ti₃C₂T_x MXene) as the sensing platform and rhodamine b/gold/reduced graphene oxide (RhB/Au/RGO) as the signal amplifier. The high conductivity and large surface area of C-Ti₃C₂T_x MXene make it a desirable nanomaterial to fix the primary antibody of LM (PAb), while the prepared Au/RGO/RhB nanohybrid is dedicated to assembling the secondary antibody (SAb) of LM, offering an amplified response signal. Through the use of RhB molecule as the signal probe, the experiments showed that the peak currents of RhB increase along with an increase in the concentration of LM from 10 to 10⁵ CFU mL^-1, and an extremely low limit of detection (2 CFU mL^-1) was obtained on the basis of the proposed immunosensing platform after optimizing various conditions. Hence, it is confirmed that the developed sandwich-like immunosensor based on C-Ti₃C₂T_x MXene and RhB/Au/Gr has great application in the detection of LM and other analytes.

Highly Sensitive Electrochemical Immunosensing for Listeria Monocytogenes Based on 3,4,9,10-Perylene Tetracarboxylic Acid/Graphene Ribbons as a Sensing Platform and Ferrocene/Gold Nanoparticles as an Amplifier

As a gram-positive foodborne pathogen, Listeria monocytogenes (LM) can cause many serious diseases to the human health coupled with high mortality rates; thus, constructing an effective method to detect LM is of great significance. Herein, a novel sandwich-type electrochemical immunosensor is proposed for LM by introducing 3,4,9,10-perylene tetracarboxylic acid/graphene ribbons (PTCA/GNR) nanohybrids as a sensing platform and ferrocene/gold nanoparticles (Fc/Au NPs) as a signal amplifier. The high conductivity and large surface area of GNR can increase the immobilizing amount of the primary antibody (PAb) and enhance the electron transport rate, while Au NPs can carry secondary antibodies (SAb) and Fc derivative (Fc-SH) to form a SAb-Au NPs-Fc signal amplifier. Through using Fc molecules as a signal probe, its peak current can appear and increase varied from the LM concentrations; hence, a highly sensitive sandwich-type immunosensor was constructed wide linear range from 10 to 2 × 10⁴-CFU mL^-1 and low limit of detection of low to 6 CFU mL^-1. Furthermore, the specificity of the immunosensor was also studied and a satisfactory result was obtained.

Simple electrochemical detection of Listeria monocytogenes based on a surface-imprinted polymer-modified electrode

Listeria monocytogenes (LM) is a foodborne pathogen, and it can pose a risk of serious diseases to the human health. Hence, the development of an effective method for the detection of LM is very important. In this study, by selecting LM as the template and 3-thiopheneacetic acid as the functional monomer, an LM-imprinted polymer (LIP)-based sensor was proposed for the first time to detect LM by electropolymerizing TPA on the glassy carbon electrode (GCE) surface in the presence of LM. After the removal of the LM template from the electrode surface, the obtained sensor was denoted as LIP/GCE, which could effectively recognize and capture LM cells. By using [Fe(CN)₆]^4-/3- as the probe, its peak current at LIP/GCE could be restricted when the LM cells were captured into the imprinted cavity of LIP/GCE, and the current value decreased with an increase in the LM concentration. Serious conditions were optimized for achieving highly sensitive detection, and a low detection limit (6 CFU mL^-1) coupled with a wide linear range (10 to 10⁶ CFU mL^-1) was obtained for LM. Finally, the inter-electrode reproducibility, stability, selectivity, and applicability of LIP/GCE were also investigated, and the obtained results were acceptable.

Advances in Nanomaterials-Based Electrochemical Biosensors for Foodborne Pathogen Detection

Electrochemical biosensors utilizing nanomaterials have received widespread attention in pathogen detection and monitoring. Here, the potential of different nanomaterials and electrochemical technologies is reviewed for the development of novel diagnostic devices for the detection of foodborne pathogens and their biomarkers. The overview covers basic electrochemical methods and means for electrode functionalization, utilization of nanomaterials that include quantum dots, gold, silver and magnetic nanoparticles, carbon nanomaterials (carbon and graphene quantum dots, carbon nanotubes, graphene and reduced graphene oxide, graphene nanoplatelets, laser-induced graphene), metal oxides (nanoparticles, 2D and 3D nanostructures) and other 2D nanomaterials. Moreover, the current and future landscape of synergic effects of nanocomposites combining different nanomaterials is provided to illustrate how the limitations of traditional technologies can be overcome to design rapid, ultrasensitive, specific and affordable biosensors.

Oligonucleotide aptamers for pathogen detection and infectious disease control

During an epidemic or pandemic, the primary task is to rapidly develop precise diagnostic approaches and effective therapeutics. Oligonucleotide aptamer-based pathogen detection assays and control therapeutics are promising, as aptamers that specifically recognize and block pathogens can be quickly developed and produced through simple chemical synthesis. This work reviews common aptamer-based diagnostic techniques for communicable diseases and summarizes currently available aptamers that target various pathogens, including the SARS-CoV-2 virus. Moreover, this review discusses how oligonucleotide aptamers might be leveraged to control pathogen propagation and improve host immune system responses. This review offers a comprehensive data source to the further develop aptamer-based diagnostics and therapeutics specific for infectious diseases.

Magnetic-Field-Driven Extraction of Bioreceptors into Polymeric Membranes for Label-Free Potentiometric Biosensing

We report here the concept of a magnetically controlled extraction of hydrophilic bioreceptors into polymeric membranes for bioassays. The potentiometric assay relies on the intrinsic charges of an antimicrobial peptide and its unique recognition abilities, which can eliminate the probe labeling and indicator addition. The target binding event could effectively prevent the extraction of the peptide into the polymeric membrane doped with an ion exchanger, thus resulting in a potential change. The potentiometric response properties of the peptide assembled on magnetic beads can be dynamically controlled and modulated by applying a magnetic field. Staphylococcus aureus, as a model of food-borne pathogens, was measured at levels down to 10 CFU mL^-1 . Based on this sensing strategy, a potentiometric array was developed for the pattern recognition of bacteria. The proposed general platform can be used for potentiometric biosensing using other hydrophilic bioreceptors.

Electrochemical biosensors for pathogen detection

Recent advances in electrochemical biosensors for pathogen detection are reviewed. Electrochemical biosensors for pathogen detection are broadly reviewed in terms of transduction elements, biorecognition elements, electrochemical techniques, and biosensor performance. Transduction elements are discussed in terms of electrode material and form factor. Biorecognition elements for pathogen detection, including antibodies, aptamers, and imprinted polymers, are discussed in terms of availability, production, and immobilization approach. Emerging areas of electrochemical biosensor design are reviewed, including electrode modification and transducer integration. Measurement formats for pathogen detection are classified in terms of sample preparation and secondary binding steps. Applications of electrochemical biosensors for the detection of pathogens in food and water safety, medical diagnostics, environmental monitoring, and bio-threat applications are highlighted. Future directions and challenges of electrochemical biosensors for pathogen detection are discussed, including wearable and conformal biosensors, detection of plant pathogens, multiplexed detection, reusable biosensors for process monitoring applications, and low-cost, disposable biosensors.

Simultaneous Sensing of Seven Pathogenic Bacteria by Guanidine-Functionalized Upconversion Fluorescent Nanoparticles

The method capable of simultaneously detecting multiple target bacterial pathogens is necessary and of great interest. In this research, we demonstrated our initial effort to simultaneously detect seven common foodborne bacteria by developing a straightforward upconversion fluorescence sensing approach. The fluorescent nanosensor was constructed from a designed guanidine-functionalized upconversion fluorescent nanoparticles (UCNPs@GDN), tannic acid, and hydrogen peroxide (HP) and could quantify pathogenic bacteria in a nonspecific manner because the luminescence of the upconversion fluorescent nanoparticle was effectively strengthened in the presence of bacteria. When the developed nanosensor was applied to quantify multiple bacteria including Escherichia coli, Salmonella, Cronobacter sakazakii, Shigella flexneri, Vibrio parahaemolyticus, Staphylococcus aureus, and Listeria monocytogenes, a linear range of 10³ to 10⁸ cfu mL^-1 and a detection limit of 1.30 × 10² cfu mL^-1 have been obtained for the seven model mixture bacteria. In addition, the similar linear range and detection limit were also obtained for the detection of single bacteria. The present approach also exhibited acceptable recovery values ranging from 70.0 to 118.2% for bacteria in real samples (water, milk, and beef). All these results suggested that the guanidine-functionalized upconversion fluorescent nanosensor could be considered as a promising candidate for the rapid detection and surveillance of microbial pollutants in food and water.

Recent progress in electrochemical biosensors as point of care diagnostics in livestock health

Livestock are critical component for supporting the sustainable agriculture in the current global scenario. In the era of artificial intelligence and automation in field of livestock, sensors play an important role. Electrochemical sensor is the type of sensor which holds reliability and tremendous promise in raising the animal productivity in developing world. An early and accurate diagnosis of the animal pathogen and metabolic status are the cornerstone for better animal productivity. The available diagnostic techniques require tedious sample preparation, sophisticated instrument, dedicated laboratory, trained personnel and it is time consuming also. The electrochemical biosensor technology might be a smart solution because of its sensitivity, simplicity, low cost, possible miniaturization and potential ability for real-time analysis. In the veterinary disease diagnostics, various biosensors including electrochemical biosensors have been developed recently, based on disease specific biomarkers. The main focus of article is on reviewing the research in detection of animal infectious and metabolic diseases, hormonal analysis and sweat analysis with electrochemical biosensor.

Actuation of chitosan-aptamer nanobrush borders for pathogen sensing

We demonstrate a sensing mechanism for rapid detection of Listeria monocytogenes in food samples using the actuation of chitosan-aptamer nanobrush borders. The bio-inspired soft material and sensing strategy mimic natural symbiotic systems, where low levels of bacteria are selectively captured from complex matrices. To engineer this biomimetic system, we first develop reduced graphene oxide/nanoplatinum (rGO-nPt) electrodes, and characterize the fundamental electrochemical behavior in the presence and absence of chitosan nanobrushes during actuation (pH-stimulated osmotic swelling). We then characterize the electrochemical behavior of the nanobrush when receptors (antibodies or DNA aptamers) are conjugated to the surface. Finally, we test various techniques to determine the most efficient capture strategy based on nanobrush actuation, and then apply the biosensors in a food product. Maximum cell capture occurs when aptamers conjugated to the nanobrush bind cells in the extended conformation (pH < 6), followed by impedance measurement in the collapsed nanobrush conformation (pH > 6). The aptamer-nanobrush hybrid material was more efficient than the antibody-nanobrush material, which was likely due to the relatively high adsorption capacity for aptamers. The biomimetic material was used to develop a rapid test (17 min) for selectively detecting L. monocytogenes at concentrations ranging from 9 to 107 CFU mL-1 with no pre-concentration, and in the presence of other Gram-positive cells (Listeria innocua and Staphylococcus aureus). Use of this bio-inspired material is among the most efficient for L. monocytogenes sensing to date, and does not require sample pretreatment, making nanobrush borders a promising new material for rapid pathogen detection in food.

Potentiometric Detection of Listeria monocytogenes via a Short Antimicrobial Peptide Pair-Based Sandwich Assay

Peptide-based sandwich assays are promising tools in molecular detection, but may be restricted by the availability of "pairs" of affinity peptides. Herein, a new potentiometric sandwich assay for bacteria based on peptide pairs derived from an antimicrobial peptide (AMP) ligand is demonstrated. As a model, the original AMP with a well-defined structure for  Listeria monocytogenes (LM) can be split into two fragments to serve as the peptide pairs for the sandwich assay. The recognition and binding of the short peptide pairs to the target can be verified by circular dichroism, flow cytometry, fluorometry, and optical microscopy. The potentiometric magnetic bead-based sandwich assay is designed by using horseradish peroxidase as a label. The enzyme can catalyze the oxidation of 3,3',5,5'-tetramethylbenzidine with H₂O₂ to induce a potential change on a polymeric membrane ion-selective electrode. Under optimal conditions, the concentration of LM can be determined potentiometrically in a linear range of 1.0 × 10² to 1.0 × 10⁶ CFU mL^-1 with a detection limit of 10 CFU mL^-1 (3σ). The proposed sensing strategy expands the applications of peptides in the field of bioassays.

A multicolorimetric assay for rapid detection of Listeria monocytogenes based on the etching of gold nanorods

Listeria monocytogenes (L. monocytogenes) is one of the most common food-borne pathogens. The authors describe a sensitive and reliable multicolorimetric assay for L. monocytogenes using a sensing system based on TMB²⁺ etching of gold nanorods. Apt-MNP was used as the capture probe, and IgY-BSA-MnO₂ NPs was chosen as an oxidase-like nano-artificial enzyme to oxidize TMB to generate TMB²⁺. Under the optimized conditions, the longitudinal shift of localized surface plasmon resonances had a linear correlation with the L. monocytogenes concentration in the range between 10 to 10⁶ cfu mL^-1. Meanwhile, the sensing system can generate vivid color responses as colorful as a rainbow, and the limit of detection is as low as 10 cfu mL^-1 at a glance. Recoveries ranging from 97.4 to 101.3% are found when analyzing spiked food samples without pre-enrichment. In our perception, it shows promise in rapid instrumental and on-site visual detection of L. monocytogenes.

Biosensor for the detection of Listeria monocytogenes: emerging trends

The early detection of Listeria monocytogenes (L. monocytogenes) and understanding the disease burden is of paramount interest. The failure to detect pathogenic bacteria in the food industry may have terrible consequences, and poses deleterious effects on human health. Therefore, integration of methods to detect and trace the route of pathogens along the entire food supply network might facilitate elucidation of the main contamination sources. Recent research interest has been oriented towards the development of rapid and affordable pathogen detection tools/techniques. An innovative and new approach like biosensors has been quite promising in revealing the foodborne pathogens. In spite of the existing knowledge, advanced research is still needed to substantiate the expeditious nature and sensitivity of biosensors for rapid and in situ analysis of foodborne pathogens. This review summarizes recent developments in optical, piezoelectric, cell-based, and electrochemical biosensors for Listeria sp. detection in clinical diagnostics, food analysis, and environmental monitoring, and also lists their drawbacks and advantages.

Nucleic acid aptamer-based methods for diagnosis of infections

Infectious diseases are a serious global problem, which not only take an enormous human toll but also incur tremendous economic losses. In combating infectious diseases, rapid and accurate diagnostic tests are required for pathogen identification at the point of care (POC). In this review, investigations of diagnostic strategies for infectious diseases that are based on aptamers, especially nucleic acid aptamers, oligonucleotides that have high affinities and specificities toward their targets, are described. Owing to their unique features including low cost of production, easy chemical modification, high chemical stability, reproducibility, and low levels of immunogenicity and toxicity, aptamers have been widely utilized as bio-recognition elements (bio-receptors) for the development of infection diagnostic systems. We discuss nucleic acid aptamer-based methods that have been developed for diagnosis of infections using a format that organizes discussion according to the target pathogenic analytes including toxins or proteins, whole cells and nucleic acids. Also included is, a summary of recent advances made in the sensitive detection of pathogenic bacteria utilizing the isothermal nucleic acid amplification method. Lastly, a nucleic acid aptamer-based POC system is described and future directions of studies in this area are discussed.

Aptamer-Modified Magnetic Beads in Biosensing

Magnetic beads (MBs) are versatile tools for the purification, detection, and quantitative analysis of analytes from complex matrices. The superparamagnetic property of magnetic beads qualifies them for various analytical applications. To provide specificity, MBs can be decorated with ligands like aptamers, antibodies and peptides. In this context, aptamers are emerging as particular promising ligands due to a number of advantages. Most importantly, the chemical synthesis of aptamers enables straightforward and controlled chemical modification with linker molecules and dyes. Moreover, aptamers facilitate novel sensing strategies based on their oligonucleotide nature that cannot be realized with conventional peptide-based ligands. Due to these benefits, the combination of aptamers and MBs was already used in various analytical applications which are summarized in this article.

Ensuring food safety using aptamer based assays: Electroanalytical approach

Aptamers, are being increasingly employed as favorable receptors for constructing highly sensitive biosensors, for their remarkable affinities towards certain targets including a wide scope of biological or chemical substances, and their superiority over other biologic receptors. The selectivity and affinity of the aptamers have been integrated with the wise design of the assay, applying suitable modifications, such as nanomaterials on the electrode surface, employing oligonucleotide-specific amplification strategies or, their combinations. After successful performance of the electrochemical aptasensors for biomedical applications, the food sector with its direct implication for human health, which demands rapid and sensitive and economic analytical solutions for determination of health threatening contaminants in all stages of production process, is the next field of research for developing efficient electrochemical aptasensors. The aim of this review is to categorize and introduce food hazards and summarize the recent electrochemical aptasensors that have been developed to address these contaminants.

Potentiometric Aptasensing of Vibrio alginolyticus Based on DNA Nanostructure-Modified Magnetic Beads

A potentiometric aptasensing assay that couples the DNA nanostructure-modified magnetic beads with a solid-contact polycation-sensitive membrane electrode for the detection of Vibrio alginolyticus is herein described. The DNA nanostructure-modified magnetic beads are used for amplification of the potential response and elimination of the interfering effect from a complex sample matrix. The solid-contact polycation-sensitive membrane electrode using protamine as an indicator is employed to chronopotentiometrically detect the change in the charge or DNA concentration on the magnetic beads, which is induced by the interaction between Vibrio alginolyticus and the aptamer on the DNA nanostructures. The present potentiometric aptasensing method shows a linear range of 10-100 CFU mL-1 with a detection limit of 10 CFU mL-1, and a good specificity for the detection of Vibrio alginolyticus. This proposed strategy can be used for the detection of other microorganisms by changing the aptamers in the DNA nanostructures.

Rapid and visual detection of Listeria monocytogenes based on nanoparticle cluster catalyzed signal amplification

Foodborne pathogens pose a significant threat to human health worldwide. The identification of foodborne pathogens needs to be rapid, accurate and convenient. Here, we constructed a nanoparticle cluster (NPC) catalyzed signal amplification biosensor for foodborne pathogens visual detection. In this work, vancomycin (Van), a glycopeptide antibiotic for Gram-positive bacteria, was used as the first molecular recognition agent to capture Listeria monocytogenes (L. monocytogenes). Fe3O4 NPC modified aptamer, was used as the signal amplification nanoprobe, specifically recognize to the cell wall of L. monocytogenes. As vancomycin and aptamer recognize L. monocytogenes at different sites, the sandwich recognition showed satisfied specificity. Compared to individual Fe3O4 nanoparticle (NP), NPC exhibit collective effect-enhanced catalytic activity for the color reaction of chromogenic substrate. The change in absorbance or color could represent the concentration of target. Using the Fe3O4 NPC-based signal amplification method, L. monocytogenes whole cells could be directly assayed within a linear range of 5.4×10(3)-10(8) cfu/mL and a visual limit of detection of 5.4×10(3) cfu/mL. Fe3O4 NPC-based method was more sensitive than the Fe3O4 NP-based method. All these attractive characteristics of highly sensitivity, visual and labor-saving, make the biosensor possess a potential application for foodborne pathogenic bacteria detection.

Paper-based plasticizer-free sodium ion-selective sensor with camera phone as a detector

An ionophore-based ion-selective optode platform on paper is described for the first time with a sodium optode as the example. Cellulose paper is shown to be an excellent substrate for adsorption of the required chromoionophore, ionophore, and ion-exchanger species. These adsorbed components form a hydrophobic phase that enables heterogeneous optical ion sensing in the absence of any plasticizer or organic polymer phase.

DNA Nanostructure-Based Magnetic Beads for Potentiometric Aptasensing

In this work, a simple, general, and sensitive potentiometric platform is presented, which allows potentiometric sensing to be applied to any class of molecule irrespective of the analyte charge. DNA nanostructures are self-assembled on magnetic beads via the incorporation of an aptamer into a hybridization chain reaction. The aptamer-target binding event leads to the disassembly of the DNA nanostructures, which results in a dramatic change in the surface charge of the magnetic beads. Such a surface charge change can be sensitively detected by a polycation-sensitive membrane electrode using protamine as an indicator. With an endocrine disruptor bisphenol A as a model, the proposed potentiometric method shows a wide linear range from 0.1 to 100 nM with a low detection limit of 80 pM (3σ). The proposed sensing strategy will lay a foundation for the development of potentiometric sensors for highly sensitive and selective detection of various targets.