Nanobody-based enzyme immunoassay for aflatoxin in agro-products with high tolerance to cosolvent methanol

Non-competitive immunoassay for zearalenone based on phage display developed recombinant antibody and anti-immunocomplex peptide

Zearalenone (ZEN) is a widely distributed mycotoxin with potent estrogenic activity. Detecting ZEN is crucial for assessing its potential health risks. This study developed a highly sensitive non-competitive magnetic phage anti-immunocomplex immunoassay (Nc-MPHAIA) for ZEN detection, utilizing the anti-ZEN single-chain variable fragment (ScFv) and anti-immunocomplex peptide (AIcP), both of which were screened using phage display technology. The method exhibited a limit of detection of 0.005 ng/mL, which was 112 times lower than that of the conventional competitive immunoassay using the same ScFv and the chemosynthetic antigen ZEN-OVA. Validation studies demonstrated excellent recovery rates in spiked corn samples (intra-assay: 84.04-109.95 %; inter-assay: 89.70-99.59 %). Additionally, the Nc-MPHAIA results for ZEN in natural samples were consistent with those obtained via high-performance liquid chromatography, which demonstrated good reliability of the established assay.

Tunning "closed-loop" pockets for constructing stabilized structures of nanobody in the detection of procymidone under a broad range of pH value

The tolerance advantages of nanobodies (Nbs) provide a new proposal for enhancing the stability and sensitivity of immunosensors. However, the tolerance of Nbs to extreme pH levels, has not been deeply investigated, as previous stability studies on Nbs had primarily focused on temperature and organic solvents. Here, a nanobody clone (NbFM5) is obtained and its tolerance is analyzed using molecular simulation and molecular docking. The simulation results reveal that the seven amino acids of NbFM5 and the ligand formed a "closed-loop" hydrophobic interaction pocket with highly electronegativity surface potential and net charges, which enhanced stability of configuration under varying pH conditions, thus ensuring the stability of the affinity. The results indicate that NbFM5 exhibited a mean antigen binding activity of 79.8 % across a pH range of 6 to 10 with standard deviation of 10 %, demonstrating high stability against a wide range of pH values. Given above, an aggregation-induced emission nanoparticles based lateral-flow biosensor is successfully established using NbFM5. The whole process of detecting procymidone is completed in 10 min with a detection limit of 0.19 ng/mL. The method has fully satisfied the need of rapid detection requirements in extreme environmental conditions and could establish a promising foodborne contaminants detection platform.

Efficient Selection of the 2,4-Dichlorophenoxyacetic Acid Nanobody Gene from the Phage Library Constructed with Sorted Specific Cells and Expression in Plants to Confer Herbicide Resistance

Immunomodulation in biotechnological processes requires an adequate level of specific, high-affinity recombinant antibodies expressed in the affected cells. Here, we report a new strategy to obtain a sensitive nanobody against the 2,4-dichlorophenoxyacetic acid (2,4-D) herbicide. Unlike the previous methods that used total peripheral blood lymphocytes, specific peripheral lymphocytes stained with a fluorescein isothiocyanate-labeled 2,4-D coating antigen were isolated via fluorescence-activated cell sorting and used for phage display library construction. This strategy significantly reduced interference of anticarrier protein nanobody phages to small-molecule nanobody development and required only two cycles of panning to obtain the desired positive clones. Nb4-11, one of the most sensitive phage clones, showed good sensitivity and specificity against 2,4-D. Compared with previously reported 2,4-D nanobodies, the sequence of Nb4-11 exhibited completely different complementarity-determining regions (CDRs). The half-maximum inhibition concentration of the Nb4-11-based ic-ELISA was 29.3 ± 1.9 ng/mL. The Nb4-11 gene was subsequently transferred into Arabidopsis thaliana to confer herbicide resistance, and homozygous transgenic T3 lines were obtained. Stable expression of the 2,4-D nanobody in the model plant was confirmed via PCR, ic-ELISA, and Western blot analysis. In the dose-response bioassay, the transgenic T3 lines were resistant to 2 g of 2,4-D ai/ha. This work offers a new way to sort specific peripheral lymphocytes, efficiently develop nanobodies against small molecules, and create a novel mechanism for herbicide resistance based on the expression of nanobodies in plants.

Biosensing strategies using recombinant luminescent proteins and their use for food and environmental analysis

Progress in synthetic biology and nanotechnology plays at present a major role in the fabrication of sophisticated and miniaturized analytical devices that provide the means to tackle the need for new tools and methods for environmental and food safety. Significant research efforts have led to biosensing experiments experiencing a remarkable growth with the development and application of recombinant luminescent proteins (RLPs) being at the core of this boost. Integrating RLPs into biosensors has resulted in highly versatile detection platforms. These platforms include luminescent enzyme-linked immunosorbent assays (ELISAs), bioluminescence resonance energy transfer (BRET)-based sensors, and genetically encoded luminescent biosensors. Increased signal-to-noise ratios, rapid response times, and the ability to monitor dynamic biological processes in live cells are advantages inherent to the approaches mentioned above. Furthermore, novel fusion proteins and optimized expression systems to improve their stability, brightness, and spectral properties have enhanced the performance and pertinence of luminescent biosensors in diverse fields. This review highlights recent progress in RLP-based biosensing, showcasing their implementation for monitoring different contaminants commonly found in food and environmental samples. Future perspectives and potential challenges in these two areas of interest are also addressed, providing a comprehensive overview of the current state and a forecast of the biosensing strategies using recombinant luminescent proteins to come.

BRET Nano Q-Body: A Nanobody-Based Ratiometric Bioluminescent Immunosensor for Point-of-Care Testing

We developed a nanobody-based homogeneous bioluminescent immunosensor to achieve a one-pot detection for point-of-care testing (POCT). This immunosensor was named BRET nano Q-body as its emission color changes via bioluminescence resonance energy transfer (BRET) upon antigen addition. NanoLuc luciferase and a cysteine-containing tag were fused to the N-terminus of the nanobody, which was labeled with a fluorescent dye via thiol-maleimide Michael addition. The nanobody employed in this proof-of-principle experiment recognizes methotrexate (MTX), a chemotherapeutic agent. After optimizing the fluorescent dye and linker, the BRET nano Q-body dose-dependently exhibited a greater than 7-fold increase in emission ratio (TAMRA/NanoLuc). Moreover, we found its superior thermostability endurance in organic solvents, reducing agents, and detergents due to the robust structure of nanobody, as well as accommodation in biological fluids, such as milk, serum, and whole blood without dilution, with limits of detection of 0.50, 1.6, and 3.7 nM, respectively. Furthermore, the BRET nano Q-body was subjected to lyophilization and fabricated into a paper device, which markedly improved its portability and enabled more than one month of storage at 25 °C. The paper device also performed appropriate functions in the biological fluids without any dilution and can be used for on-site therapeutic drug monitoring of MTX. Altogether, we developed a powerful tool, the BRET nano Q-body, for POCT, and demonstrated its applicability in several biological fluids. In addition, we confirmed the feasibility of paper devices, which are expected to be transformative for in situ detection in therapeutic, diagnostic, and environmental applications.

Investigation of Antibody Tolerance in Methanol for Analytical Purposes: Methanol Effect Patterns and Molecular Mechanisms

The extraction of targets from biological samples for immunoassays using organic solvents, such as methanol, is often necessary. However, high concentrations of organic solvents in extracts invariably lead to instability of the employed antibody, resulting in poor performance of the immunoassay. Evaluating the tolerance ability and exploring the molecular mechanisms of antibody tolerance in organic solvents are essential for the development of robust immunoassays. In this work, 25 monoclonal antibodies and methanol are utilized as models to address these questions. A novel protocol is initially established to precisely and rapidly determine antibody tolerance in methanol, identifying two distinct methanol effect patterns. Through a detailed investigation of the structural basis, a novel hypothesis regarding methanol effect patterns is proposed, termed "folding-aggregation," which is subsequently validated through molecular dynamics simulations. Furthermore, the investigation of sequence basis reveals significant differences in residue types within the complementarity-determining regions and ligand-binding residues, distinguishing the two antibody methanol effect patterns. Moreover, the methanol effect patterns of the antibodies are defined by germline antibodies. This work represents the first exploration of antibody methanol effect patterns and associated molecular mechanisms, with potential implications for the discovery and engineering of tolerant antibodies for the development of robust immunoassays.

Food-Borne Biotoxin Neutralization in Vivo by Nanobodies: Current Status and Prospects

Food-borne biotoxins from microbes, plants, or animals contaminate unclean, spoiled, and rotten foods, posing significant health risks. Neutralizing such toxins is vital for human health, especially after food poisoning. Nanobodies (Nbs), a type of single-domain antibodies derived from the genetic cloning of a variable domain of heavy chain antibodies (VHHs) in camels, offer unique advantages in toxin neutralization. Their small size, high stability, and precise binding enable effective neutralization. The use of Nbs in neutralizing food-borne biotoxins offers numerous benefits, and their genetic malleability allows tailored optimization for diverse toxins. As nanotechnology continues to evolve and improve, Nbs are poised to become increasingly efficient and safer tools for toxin neutralization, playing a pivotal role in safeguarding human health and environmental safety. This review not only highlights the efficacy of these agents in neutralizing toxins but also proposes innovative solutions to address their current challenges. It lays a solid foundation for their further development in this crucial field and propels their commercial application, thereby contributing significantly to advancements in this domain.

Streptavidin-biotin system-mediated immobilization of a bivalent nanobody onto magnetosomes for separation and analysis of 3-phenoxybenzoic acid in urine

The compound 3-phenoxybenzoic acid (3-PBA) is frequently utilized as a biomarker to detect exposure to various pyrethroids. In this study, a bivalent nanobody (Nb2) specifically targeting 3-PBA was biotinylated and immobilized onto streptavidin (SA)-modified bacterial magnetic nanoparticles (BMPs), resulting in the formation of BMP-SA-Biotin-Nb2 complexes. These complexes demonstrated remarkable stability when exposed to strongly acidic solutions (4 M HCl), methanol (80%), and high ionic strength (1.37 M NaCl). An immunoassay was subsequently developed utilizing BMP-SA-Biotin-Nb2 as the capture agent and 3-PBA-horseradish peroxidase as the detection probe. The immunoassay exhibited an IC50 value (half-maximum signal inhibition concentration) of 1.11 ng mL-1 for 3-PBA. To evaluate the accuracy of the assay, spiked sheep and cow urine samples (ranging from 3.0 to 240 ng mL-1) were analyzed. The quantitative recoveries ranged from 82.5% to 113.1%, which agreed well with the findings obtained using liquid chromatography-tandem mass spectrometry (LC-MS/MS). Overall, the BMP-SA-Biotin-Nb2-based immunoassay holds great promise for rapid monitoring of 3-PBA following acid dissociation.

Protein nanoscaffold enables programmable nanobody-luciferase immunoassembly for sensitive and simultaneous detection of aflatoxin B1 and ochratoxin A

Mycotoxins produced by fungi can contaminate various foods and pose significant health risks. Ensuring food safety demands rapid, highly sensitive analytical techniques. One-step Bioluminescent Enzyme Immunoassays (BLEIAs) employing nanobody-nanoluciferase fusion proteins have recently garnered attention for operational simplicity and heightened sensitivity. Nevertheless, fixed nanobody:nanoluciferase ratios in fusion proteins restrict the customization and sensitivity of traditional BLEIAs. In this study, we present a Scaffold Assembly-based BLEIA (SA-BLEIA) that overcomes these limitations through the programmable conjugation of nanobodies and luciferases onto 60-meric protein nanoscaffolds using SpyTag/SpyCatcher linkages. These nanoscaffolds facilitate the adjustable coupling of anti-aflatoxin B1 and anti-ochratoxin A nanobodies with luciferases, optimizing nanobody/luciferase ratios and diversifying specificities. Compared to conventional methods, SA-BLEIA demonstrates considerably elevated sensitivity for detecting both toxins. The elevated local concentration of luciferase significantly amplifies bioluminescence intensity, permitting reduced substrate consumption and cost-effective detection. The usage of dual-nanobody conjugates facilitates the quantification or simultaneous detection of both mycotoxins in a single test with shared reagents. The assay exhibits exceptional recovery rates in spiked cereal samples, strongly correlating with outcomes from commercial ELISA kits. Overall, this adaptable, highly sensitive, cost-effective, and multiplexed immunoassay underscores the potential of tunable scaffold assembly as a promising avenue for advancing bioanalytical diagnostic tools.

Biosynthesis of magnetosome-nanobody complex in Magnetospirillum gryphiswaldense MSR-1 and a magnetosome-nanobody-based enzyme-linked immunosorbent assay for the detection of tetrabromobisphenol A in water

In this study, two mutant strains, TBC and TBC+, able to biosynthesize a novel functional magnetosome-nanobody (Nb), were derived from the magnetotactic bacteria Magnetospirillum gryphiswaldense MSR-1. The magnetosome-Nbs biosynthesized by TBC+ containing multi-copies of the Nb gene had a higher binding ability to an environmental pollutant, tetrabromobisphenol A (TBBPA), than those biosynthesized by TBC containing only one copy of the Nb gene. The magnetosome-Nbs from TBC+ can effectively bind to TBBPA in solutions with high capacity without being affected by a broad range of NaCl and methanol concentrations as well as pH. Therefore, a magnetosome-Nb-based enzyme-linked immunosorbent assay (ELISA) was developed and optimized for the detection of TBBPA, yielding a half-maximum signal inhibition concentration of 0.23 ng/mL and a limit of detection of 0.025 ng/mL. The assay was used to detect TBBPA in spiked river water samples, giving average recoveries between 90 and 120% and coefficients of variation of 2.5-6.3%. The magnetosome-Nb complex could be reused 4 times in ELISA without affecting the performance of the assay. Our results demonstrate the potential of magnetosome-Nbs produced by TBC+ as cost-effective and environment-friendly reagents for immunoassays to detect small molecules in environmental waters.

Improvement of the sensitivity of lateral flow systems for detecting mycotoxins: Up-to-date strategies and future perspectives

Mycotoxins are dangerous human and animal health-threatening secondary fungal metabolites that can be found in various food and agricultural products. Several countries have established regulations to restrict their presence in food and agricultural products destined for human and animal consumption. Consequently, the need to develop highly sensitive and smart detection systems was recognized worldwide. Lateral flow assay possesses the advantages of easy operation, rapidity, stability, accuracy, and specificity, and it plays an important role in the detection of mycotoxins. Nevertheless, strategies to comprehensively improve the sensitivity of lateral flow assay to mycotoxins in food have rarely been highlighted and discussed. In this article, a comprehensive overview was presented on the application of lateral flow assay in mycotoxin detection in food samples by highlighting the principle of lateral flow assay, presenting a detailed discussion on various analytical performance-improvement strategies, such as the development of high-affinity recognition reagents, immunogen immobilization methods, and signal amplification. Additionally, a detailed discussion on the various signal analyzers and interpretation approaches was provided. Finally, current hurdles and future perspectives on the application of lateral flow assay in the detection of mycotoxins were discussed.

Multiple Isothermal Amplification Coupled with CRISPR-Cas14a for the Naked-eye and Colorimetric Detection of Aflatoxin B1

Aflatoxin B1 (AFB1) is highly toxic and challenging to remove, posing significant risks to both human health and economic development. Therefore, there is an urgent need to develop rapid, simple, and sensitive detection technologies. In this study, we introduce a naked-eye and colorimetric method based on multiple isothermal amplifications coupled with CRISPR-Cas14a and investigate its biosensing properties. This technique utilizes composite nanoprobes (MAPs) comprising magnetic nanoparticles and gold nanoparticles. AFB1 is efficiently identified through an aptamer competition process facilitated by magnetic nanoparticles , which triggers multiple isothermal amplification. This converts trace amounts of the toxin into a large quantity of DNA signal. Upon specific activation of the CRISPR-Cas14a complex, the MAPs are cleaved, resulting in significant changes in both color and colorimetric signal. The method demonstrates acceptable sensitivity, with a detection limit of 31.90 pg mL-1 and a wide detection range from 0.05 to 10 ng mL-1. Furthermore, the assay exhibits satisfactory specificity and high accuracy when it is applied to practical samples. Our approach offers a universal sensing platform with potential applications in food safety, environmental monitoring, and clinical diagnostics.

Overview-gold nanoparticles-based sensitive nanosensors in mycotoxins detection

Food-borne mycotoxins is one of the food safety concerns in the world. At present, nanosensors are widely used in the detection and analysis of mycotoxins due to their high specificity and sensitivity. In nanosensor-based mycotoxindetections, the sensitivity is mainly improved from two aspects. On the one hand, based on the principle of immune response, antigens and antibodies can be modified and developed. Such as single-domain heavy chain antibodies, aptamers, peptides, and antigen mimotopes. On the other hand, improvements and innovations have been made on signal amplification materials, including gold nanoparticles (AuNPs), quantum dots, and graphene, etc. Among them, gold nanoparticles can not only be used as a signal amplification material, but also can be used as carriers for identification elements, which can be used for signal amplification in detection. In this article, we systematically summarized the emerging strategies for enhancing the detection sensitivity of traditional gold nanoparticles-based nanosensors, in terms of recognition elements and signal amplification. Representative examples were selected to illustrate the potential mechanism of each strategy in enhancing the colorimetric signal intensity of AuNP and its potential application in biosensing. Finally, our review suggested the challenges and future prospects of gold particles in detection of mycotoxins.

Molecular Evolution of Antiparathion Nanobody with Enhanced Sensitivity and Specificity Based on Structural Analysis

Nanobody (Nb) has gained significant attention in immunoassays owing to its numerous advantages, particularly its ease of molecular evolution. However, the limited understanding of how high sensitivity and specificity attained for antihapten Nbs hamper the development of high-performance Nbs. Herein, the antiparathion Nb (Nb9) we prepared previously was chosen as the model, and an approach based on X-ray crystallography, molecular docking, and rational site-directed saturation mutation for constructing a rapid and effective platform for nanobody evolution was described. Based on the structural analysis, two mutants, namely Nb-D5 (IC50 = 2.4 ± 0.2 ng/mL) and Nb-D12 (IC50 = 2.7 ± 0.1 ng/mL), were selected out from a six-sites directed saturation mutation library, 3.5-fold and 3.1-fold sensitivity enhancement over Nb9 to parathion, respectively. Besides, Nb-D12 exhibited improved sensitivity for quinalphos, triazophos, and coumaphos (5.4-35.4 ng/mL), indicating its broader detection potential. Overall, our study advances an effective strategy for the future rational evolution of Nbs with desirable performance.

Self-Assembly Multivalent Fluorescence-Nanobody Coupled Multifunctional Nanomaterial with Colorimetric Fluorescence and Photothermal to Enhance Immunochromatographic Assay

The multimodal lateral flow immunoassay (LFIA) has provided accurate and reliable results for fast and immediate detection. Nonetheless, multimodal LFIA remains challenging to develop biosensors with high sensitivity and tolerance to matrix interference in agro-food. In this study, we developed a self-assembled multivalent fluorescence-nanobody (Nb26-EGFP-H6) with 16.5-fold and 30-fold higher affinity and sensitivity than a monovalent nanobody (Nb26). Based on the Nb26-EGFP-H6, we synthesized enhanced immune-probes Zn-CN@Nb26-EGFP-H6 by pyrolyzing and oxidizing an imidazolating zeolite framework-8 (ZIF-8) to obtain photothermal metal-carbon nanomaterials (Zn-CN) for immobilizing Nb26-EGFP-H6. The rough and porous structure of Zn-CN with a large surface area facilitates the enrichment and immobilization of antibodies. A trimodal lateral flow immunoassay (tLFIA) with colorimetric, fluorescent, and photothermal triple signal outputs was constructed for the detection of aflatoxin B1 (AFB1) in maize. Attractively, the Zn-CN-based tLFIA's multiplex guarantees accurate and sensitive detection of AFB1, with triple signal detection limits of 0.0012 ng/mL (colorimetric signals), 0.0094 ng/mL (fluorescent signals), and 0.252 ng/mL (photothermal signals). The sensitivity of the trimode immunosensor was 628-fold and 42-fold higher than that of the original Nb26-based ELISA (IC50) and the unimodal LFIA (LOD). This work provides an idea for constructing a sensitive, tolerant matrix and efficient and accurate analytical platform for rapidly detecting AFB1 in food.

Structural Insights into the Stability and Recognition Mechanism of the Antiquinalphos Nanobody for the Detection of Quinalphos in Foods

Nanobodies (Nbs) have great potential in immunoassays due to their exceptional physicochemical properties. With the immortal nature of Nbs and the ability to manipulate their structures using protein engineering, it will become increasingly valuable to understand what structural features of Nbs drive high stability, affinity, and selectivity. Here, we employed an anti-quinalphos Nb as a model to illustrate the structural basis of Nbs' distinctive physicochemical properties and the recognition mechanism. The results indicated that the Nb-11A-ligand complexes exhibit a "tunnel" binding mode formed by CDR1, CDR2, and FR3. The orientation and hydrophobicity of small ligands are the primary determinants of their diverse affinities to Nb-11A. In addition, the primary factors contributing to Nb-11A's limited stability at high temperatures and in organic solvents are the rearrangement of the hydrogen bonding network and the enlargement of the binding cavity. Importantly, Ala 97 and Ala 34 at the active cavity's bottom and Arg 29 and Leu 73 at its entrance play vital roles in hapten recognition, which were further confirmed by mutant Nb-F3. Thus, our findings contribute to a deeper understanding of the recognition and stability mechanisms of anti-hapten Nbs and shed new light on the rational design of novel haptens and directed evolution to produce high-performance antibodies.

A novel immunosensor based on cobalt oxide nanocomposite modified single walled carbon nanohorns for the selective detection of aflatoxin B1

We developed a novel, sensitive, and selective platform for the specific determination of aflatoxin B1 (AFB1). Single-walled carbon nanohorns decorated by a cobalt oxide composite and gold nanoparticles were created to provide facile electron transfer and improve the sensor's sensitivity. In addition, we attributed the selectivity of the proposed sensor to the specific binding property of the anti-aflatoxin B1 antibody. We clarified the specific interaction of the proposed immunosensor to AFB1 using homology modeling combined with molecular docking. In the presence of AFB1, the current signal of the modified electrode reduced; this involved specific antibody-antigen binding, including hydrophobic hydrogen bonding and pi-pi stack interactions. The new AFB1 sensor platform showed two linearity ranges of 0.01-1 ng mL^-1 and 1-100 ng mL^-1, with the limit of detection at 0.0019 ng mL^-1. We investigated the proposed immunosensor in real samples, including peanuts, certified reference material of a peanut sample (labeled 206 μg kg^-1 AFB1), corn, and chicken feed. The sensor's accuracy was 86.1-104.4% recovery, which agrees with the reference HPLC technique using paired t-test analysis. The present work shows excellent performance for AFB1 detection and could be applied for food quality control or modified to detect other mycotoxins.

A Chemiluminescence Enzyme Immunoassay Based on Biotinylated Nanobody and Streptavidin Amplification for Diazinon Sensitive Quantification

The advantages of genetic modification and preferable physicochemical qualities make nanobody (Nb) easy to develop a sensitive and stable immunosensor platform. Herein, an indirect competitive chemiluminescence enzyme immunoassay (ic-CLEIA) based on biotinylated Nb was established for the quantification of diazinon (DAZ). The anti-DAZ Nb, named Nb-EQ1, with good sensitivity and specificity, was obtained from an immunized library via a phage display technique, where the molecular docking results indicated that the hydrogen bond and hydrophobic interactions between DAZ and complementarity-determining region 3 and framework region 2 in Nb-EQ1 played a critical role in the Nb-DAZ affinity processes. Subsequently, the Nb-EQ1 was further biotinylated to generate a bi-functional Nb-biotin, and then an ic-CLEIA was developed for DAZ determination via signal amplification of the biotin-streptavidin platform. The results showed that the proposed method based on Nb-biotin had a high specificity and sensitivity to DAZ, with a relative broader linear range of 0.12-25.96 ng/mL. After being 2-folds dilution of the vegetable samples matrix, the average recoveries were 85.7-113.9% with a coefficient of variation of 4.2-19.2%. Moreover, the results for the analysis of real samples by the developed ic-CLEIA correlated well with that obtained by reference method GC-MS (R² ≥ 0.97). In summary, the ic-CLEIA based on biotinylated Nb-EQ1 and streptavidin recognition demonstrated itself to be a convenient tool for the quantification of DAZ in vegetables.

Development of anti-aflatoxin B1 nanobodies from a novel mutagenesis-derived synthetic library for traditional Chinese medicine and foods safety testing

BACKGROUND

The main commercially available methods for detecting small molecules of mycotoxins in traditional Chinese medicine (TCM) and functional foods are enzyme-linked immunosorbent assay and mass spectrometry. Regarding the development of diagnostic antibody reagents, effective methods for the rapid preparation of specific monoclonal antibodies are inadequate.

METHODS

In this study, a novel synthetic phage-displayed nanobody Golden Glove (SynaGG) library with a glove-like cavity configuration was established using phage display technology in synthetic biology. We applied this unique SynaGG library on the small molecule aflatoxin B1 (AFB1), which has strong hepatotoxicity, to isolate specific nanobodies with high affinity for AFB1.

RESULT

These nanobodies exhibit no cross-reactivity with the hapten methotrexate, which is recognized by the original antibody template. By binding to AFB1, two nanobodies can neutralize AFB1-induced hepatocyte growth inhibition. Using molecular docking, we found that the unique non-hypervariable complementarity-determining region 4 (CDR4) loop region of the nanobody was involved in the interaction with AFB1. Specifically, the CDR4's positively charged amino acid arginine directed the binding interaction between the nanobody and AFB1. We then rationally optimized the interaction between AFB1 and the nanobody by mutating serine at position 2 into valine. The binding affinity of the nanobody to AFB1 was effectively improved, and this result supported the use of molecular structure simulation for antibody optimization.

CONCLUSION

In summary, this study revealed that the novel SynaGG library, which was constructed through computer-aided design, can be used to isolate nanobodies that specifically bind to small molecules. The results of this study could facilitate the development of nanobody materials to detect small molecules for the rapid screening of TCM materials and foods in the future.

Mix-and-Read Nanobody-Based Sandwich Homogeneous Split-Luciferase Assay for the Rapid Detection of Human Soluble Epoxide Hydrolase

The soluble epoxide hydrolase (sEH) is possibly both a marker for and target of numerous diseases. Herein, we describe a homogeneous mix-and-read assay for the detection of human sEH based on using split-luciferase detection coupled with anti-sEH nanobodies. Selective anti-sEH nanobodies were individually fused with NanoLuc Binary Technology (NanoBiT), which consists of a large and small portion of NanoLuc (LgBiT and SmBiT, respectively). Different orientations of the LgBiT and SmBiT-nanobody fusions were expressed and investigated for their ability to reform the active NanoLuc in the presence of the sEH. After optimization, the linear range of the assay could reach 3 orders of magnitude with a limit of detection (LOD) of 1.4 ng/mL. The assay has a high sensitivity to human sEH and reached a similar detection limit to our previously reported conventional nanobody-based ELISA. The procedure of the assay was faster (30 min total) and easy to operate, providing a more flexible and simple way to monitor human sEH levels in biological samples. In general, the immunoassay proposed here offers a more efficient detection and quantification approach that can be easily adapted to numerous macromolecules.

Isolation of atrazine nanobodies enhanced by depletion of anti-carrier protein phages and performance comparison between the nanobody and monoclonal antibody derived from the same immunogen

Nanobody, a single domain antibody, has been shown a great promise for immunoassay (IA) applications. To improve the panning efficiency so as to obtain a valuable nanobody, anti-carrier protein phages in a phage display library were depleted to enhance the selection of nanobodies against the herbicide atrazine by using immunomagnetic beads conjugated with bovine serum albumin (IMB-BSA). The depletion of anti-carrier protein phages from the atrazine phage display library tripled the number of atrazine positive phage clones after four rounds of panning. One of the most sensitive phage clones Nb3 selected from the IMB-BSA depleted library was used to compare the performance with the monoclonal antibody (mAb 5D9) developed from the same immunogen. The Nb3-based IA exhibited similar specificity with the mAb 5D9-based IA, but greater thermostability and organic solvent tolerance. The half-maximum inhibition concentration (IC₅₀) of the former was 3.5-fold greater than that of the latter (36.7 ng/mL versus 10.2 ng/mL). Because the Nb3-based IA was more robust than the mAb 5D9-based IA, the method detection limit of the two assays was 7.8 ng/mL of atrazine in river samples. The depletion strategy can increase the chance to acquire high quality nanobody and can be applicable for effective development of nanobodies against other small molecules.

Dual-Modal Immunosensor Made with the Multifunction Nanobody for Fluorescent/Colorimetric Sensitive Detection of Aflatoxin B1 in Maize

In recent years, dual-modal immunosensors based on synthetic nanomaterials have provided accurate and sensitive detection. However, preparation of nanomaterial probes can be time-consuming, laborious, and not limited to producing inactive and low-affinity antibodies. These challenges can be addressed through the multifunction nanobody without conjugation. In this study, a nanobody-enhanced green fluorescent (Nb26-EGFP) was novel produced with a satisfactory affinity and fluorescent properties. Then, a dual-modal fluorescent/colorimetric immunosensor was constructed using the Nb26-EGFP-gold nanoflowers (AuNFs) composite as a probe, to detect the aflatoxin B₁ (AFB₁). In the maize matrix, the proposed immunosensor showed high sensitivity with a limit of detection (LOD) of 0.0024 ng/mL and a visual LOD of 1 ng/mL, which is 20-fold and 325-fold compared with the Nb26-EGFP-based single-modal immunosensor and original nanobody Nb26-based immunoassay. The performance of the dual-modal assay was validated by a high-performance liquid chromatography method. The recoveries were between 83.19 and 108.85%, with the coefficients of variation below 9.43%, indicating satisfied accuracy and repeatability. Overall, the novel Nb26-EGFP could be used as the detection probe, and the dual-modal immunosensor could be used as a practical detection method for AFB₁ in real samples.

Biophysical and biochemical insights in the design of immunoassays

BACKGROUND

Rapid antigen assays have been attractive for decentralized, point of care diagnostics because of their low cost, robustness, and ease of use. The development of a diagnostic assay for a newly emerging infectious disease needs to take into account the progression of a disease, whether there is human to human transmission, and patient biomarker levels with time, and these all impact the choice of antigen targets and affinity agents.

SCOPE OF REVIEW

The factors involved in the biophysical design of rapid antigen immunoassays are discussed, focusing on antigen selection and designing for cross-reactivity. State of the art in the biophysical characterization of protein-ligand or antigen-antibody interactions, the different types of affinity agents used in immunoassays, and biochemical conjugation strategies are described.

MAJOR CONCLUSIONS

Antigen choice is a critical factor in immunoassay diagnostic development, and should account for the properties of the virion, virus, and disease progression. Biophysical and biochemical aspects of immunoassays are critical for performance.

GENERAL SIGNIFICANCE

This review can serve as an instructive guide to aid in diagnostic development for future emerging diseases.

Exploration of Specific Nanobodies As Immunological Reagents to Detect Milk Allergen of β-Lactoglobulin without Interference of Hydrolytic Peptides

Milk proteins are widely used for food supplementation, despite the potential risk of food allergy, especially against β-lactoglobulin (BLG), which makes BLG surveillance critical. Possible interaction of detecting antibodies with BLG-derived peptides will result in unprecise inspection. Thus, in this study, it was proposed to generate nanobodies (Nbs) and validate the immunological detection of intact BLG rather than hydrolytic peptides. Nbs were successfully retrieved and characterized with high stability and target specificity. A competitive enzyme-linked immunosorbent assay (cELISA) was developed with a linear range from 39 to 10,000 ng/mL and a detection limit (LOD) of 4.55 ng/mL, with a recovery of 86.30%-95.09% revealed by analysis of spiked samples. Meanwhile, a sandwich ELISA (sELISA) was established with Nb82 and BLG polyclonal antibody (pAb-BLG) providing a linear range from 29.7 to 1250 ng/mL and an LOD of 13.82 ng/mL with a recovery of 87.82%-103.97%. The interaction of selected Nbs with BLG-derived peptides was investigated by Nb structure modeling and BLG docking. No binding on hydrolytic peptides was revealed, confirming the precision of Nb-mediated immunoassays. In summary, this study successfully identified BLG-specific Nbs for immunoassay development and guaranteed the monitoring of intact BLG without interference of hydrolytic peptides, providing experimental evidence that our Nbs recognize intact food allergen.

Research progress on unique paratope structure, antigen binding modes, and systematic mutagenesis strategies of single-domain antibodies

Single-domain antibodies (sdAbs) showed the incredible advantages of small molecular weight, excellent affinity, specificity, and stability compared with traditional IgG antibodies, so their potential in binding hidden antigen epitopes and hazard detection in food, agricultural and veterinary fields were gradually explored. Moreover, its low immunogenicity, easy-to-carry target drugs, and penetration of the blood-brain barrier have made sdAbs remarkable achievements in medical treatment, toxin neutralization, and medical imaging. With the continuous development and maturity of modern molecular biology, protein analysis software and database with different algorithms, and next-generation sequencing technology, the unique paratope structure and different antigen binding modes of sdAbs compared with traditional IgG antibodies have aroused the broad interests of researchers with the increased related studies. However, the corresponding related summaries are lacking and needed. Different antigens, especially hapten antigens, show distinct binding modes with sdAbs. So, in this paper, the unique paratope structure of sdAbs, different antigen binding cases, and the current maturation strategy of sdAbs were classified and summarized. We hope this review lays a theoretical foundation to elucidate the antigen-binding mechanism of sdAbs and broaden the further application of sdAbs.

A Nanobody-Based Immunoassay for Detection of Ustilaginoidins in Rice Samples

Ustilaginoidins are a class of bis-naphtho-γ-pyrone mycotoxins produced by the pathogen Villosiclava virens of rice false smut, which has recently become one of the most devastating diseases in rice-growing regions worldwide. In this research, the nanobody phage display library was established after an alpaca was immunized with the hemiustilaginoidin F-hapten coupled with bovine serum albumin (BSA). Heterologous antigen selection and combing trypsin with competition alternant elution methods were performed for nanobody screening. Two nanobodies, namely, Nb-B15 and Nb–C21, were selected for the establishment of indirect competitive enzyme-linked immunosorbent assays (ic-ELISAs). For Nb–B15 and Nb-C21, their IC₅₀ values were 11.86 μg/mL and 11.22 μg/mL, and the detection ranges were at 3.41–19.98 μg/mL and 1.17–32.13 μg/mL, respectively. Two nanobodies had a broad spectrum to quantify the contents of total ustilaginoidins in rice samples according to cross-reactivity. The recognition mechanisms of Nb-B15 and Nb-C21 against ustilaginoidin A were elucidated by molecular modeling and docking. The key amino acid sites for the binding of Nb–B15 or Nb–C21 to ustilaginoidin A were mainly located in the FR1 and CDR1 regions. As Nb-B15 was superior to Nb–C21 in the aspects of protein expression, ELISA titer, and tolerance to organic solvents, it was selected for application in the detection of actual contaminated rice samples. The total ustilaginoidin contents of rice samples were analyzed by Nb–B15-based ic–ELISA and HPLC-DAD, between which the results were found to be consistent. The developed immunoassay based on the nanobody from the alpaca can be employed as a rapid and effective method for detection of total utilaginoidins in contaminated rice samples.

Screen-printed electrochemical immunosensor based on a novel nanobody for analyzing aflatoxin M1 in milk

This study aimed to devise a nontoxic electrochemical immunosensor to quantitatively determine aflatoxin M₁ by chronoamperometry with novel anti-idiotypic nanobody-functionalized screen-printed carbon electrodes (SPCEs). Anti-idiotype nanobodies (AIdnb) were developed to replace the high toxic chemically synthesized antigen. AIdnb was immobilized on the surface of SPCE via covalent coupling as capture reagent. The functionalized SPCEs were followed by characterization using electrochemical impedance spectroscopy, fourier-transform infrared spectroscopy, transmission electron microscopy mapping, and atomic force microscopy. After optimizing experimental parameters, the assembled immunosensor exhibited a good linearity range of 0.25-5.0 ng/mL, with the limit of detection of 0.09 ng/mL. The immunosensor showed a satisfactory selectivity to AFM₁, without interference from analogs, including zearalenone, ochratoxin, and fumonisin B₁. For practical application, the developed immunosensor was validated using real spiked samples with the recovery range 82.0%-108.0% and relative standard deviation (RSD) 10.1%-13.0%, indicating that it could be used in milk samples.

Characterization of rabbit polyclonal antibody against camel recombinant nanobodies

Nanobodies (Nbs) are recombinant single-domain fragments derived from camelids’ heavy-chain antibodies (HCAbs). Nanobodies are increasingly used in numerous biotechnological and medical applications because of their high stability, solubility, and yield. However, one major obstacle prohibiting Nb expansion is the affordability of specific detector antibodies for their final revelation. In this work, the production of a specific anti-Nb antibody as a general detector for camel antibodies, conventional cIgG, and HCAb, and their derived Nbs was sought. Thus, a T7 promoter plasmid was constructed and used to highly express six different Nbs that were used in a successful rabbit immunization. Affinity-purified rabbit anti-Nb rIgG was able to detect immobilized or antigen-bound Nbs via enzyme-linked immunosorbent assay, and its performance was comparable to that of a commercial anti-6× His antibody. Its capacities in dosing impure Nbs, detecting Nbs displayed on M13 phages, and revealing denatured Nbs in immune blotting were all proven. As expected, and because of shared epitopes, rabbit anti-Nb cross-reacted with cIgG, HCAbs, and 6× His-tagged proteins, and the percentage of each fraction within anti-Nb rIgG was determined. Anti-Nb is a promising tool for the checkpoints throughout the recombinant Nb technology.

Visual detection of aflatoxin B1 based on specific aptamer recognition combining with triple amplification strategy

A highly sensitive and specific visual detection method for aflatoxin B1 (AFB1) based on the target specificity of aptamer, rolling circle amplification (RCA) and enzyme catalysis biological amplification effect has been established. In this work, AFB1 aptamer immobilized on the surface of magnetic beads (MB) serves as a molecular recognition probe. In the absence of AFB1, the aptamer and auxiliary linking probe (LP) maintain a double stranded state due to partial base pair complementarities. By contrast, in the presence of AFB1, the aptamer preferentially binds to AFB1 specifically, and the LP later restores to a single stranded state. Subsequently, the RCA reaction is triggered by above-mentioned single stranded LP to generate long DNA strands, which are employed to capture amounts of signal probes (SP) and horse radish peroxidases (HRP). Finally, amounts of HRP catalyze the oxidation of 3,3',5,5'-tetramethylbenzidine (TMB) by H₂O₂ and leads to a dramatic color change of the solution from colorlessness to deep blue as a signal indicator, obtaining a high sensitivity, high specificity and visual detection of AFB1. Under optimal conditions, a good linear detection range (0.5-40 pg·mL^-1) was achieved, and the limit of detection (LOD) was 0.13 pg·mL^-1. Besides, the proposed aptasensor showed excellent specificity for AFB1 compared with five other mycotoxins. More than that, all reactions occur on the surface of the magnetic beads, which not only facilitates the detection operation process including the efficient isolation and collection of AFB1 from sample matrix, but also gets better selectivity and stronger resistibility to target analyte in complex sample matrix, adequately indicating its potential application in AFB1 practical detection.

Production and Characterization of Biotinylated Anti-fenitrothion Nanobodies and Development of Sensitive Fluoroimmunoassay

A simple and sensitive fluoroimmunoassay (FIA) based on a heavy-chain antibody (VHH) for rapid detection of fenitrothion was developed. A VHH library was constructed from an immunized alpaca, and one clone recognizing fenitrothion (namely, VHHjd8) was achieved after careful biopanning. It was biotinylated by fusing with the Avi tag and biotin ligase to obtain a fusion protein (VHHjd8-BT), showing both binding capacity to fenitrothion and the streptavidin poly-horseradish peroxidase conjugate (SA-polyHRP). Based on a competitive assay format, the absorbance spectrum of oxidized 3,3',5,5'-tetramethylbenzidine generated by SA-polyHRP overlapped the emission spectrum of carbon dots, which resulted in quenching of signals due to the inner-filter effect. The developed FIA showed an IC₅₀ value of 1.4 ng/mL and a limit of detection of 0.03 ng/mL, which exhibited 15-fold improvement compared with conventional enzyme-linked immunosorbent assay. The recovery test of FIA was validated by standard GC-MS/MS, and the results showed good consistency, indicating that the assay is an ideal tool for rapid screening of fenitrothion in bulk food samples.

Nanobody and Nanozyme-Enabled Immunoassays with Enhanced Specificity and Sensitivity

Immunoassay as a rapid and convenient method for detecting a variety of targets has attracted tremendous interest with its high specificity and sensitivity. Among the commonly used immunoassays, enzyme-linked immunosorbent assay has been widely used as a gold standard method in various fields that consists of two main components including a recognition element and an enzyme label. With the rapid advances in nanotechnology, nanobodies and nanozymes enable immunoassays with enhanced specificity and sensitivity compared with conventional antibodies and natural enzymes. This review is focused on the applications of nanobodies and nanozymes in immunoassays. Nanobodies advantage lies in their small size, high specificity, mass expression, and high stability. Nanozymes with peroxidase, phosphatase, and oxidase activities and their applications in immunoassays are highlighted and discussed in detail. In addition, the challenges and outlooks in terms of the use of nanobodies and the development of novel nanozymes in practical applications are discussed.

Phage-based technologies for highly sensitive luminescent detection of foodborne pathogens and microbial toxins: A review

Foodborne pathogens and microbial toxins are the main causes of foodborne illness. However, trace pathogens and toxins in foods are difficult to detect. Thus, techniques for their rapid and sensitive identification and quantification are urgently needed. Phages can specifically recognize and adhere to certain species of microbes or toxins due to molecular complementation between capsid proteins of phages and receptors on the host cell wall or toxins, and thus they have been successfully developed into a detection platform for pathogens and toxins. This review presents an update on phage-based luminescent detection technologies as well as their working principles and characteristics. Based on phage display techniques of temperate phages, reporter gene detection assays have been designed to sensitively detect trace pathogens by luminous intensity. By the host-specific lytic effects of virulent phages, enzyme-catalyzed chemiluminescent detection technologies for pathogens have been exploited. Notably, these phage-based luminescent detection technologies can discriminate viable versus dead microbes. Further, highly selective and sensitive immune-based assays have been developed to detect trace toxins qualitatively and quantitatively via antibody analogs displayed by phages, such as phage-ELISA (enzyme-linked immunosorbent assay) and phage-IPCR (immuno-polymerase chain reaction). This literature research may lead to novel and innocuous phage-based rapid detection technologies to ensure food safety.

Camelization of a murine single-domain antibody against aflatoxin B1 and its antigen-binding analysis

Aflatoxin B1 (AFB1), a highly toxic mycotoxin, always contaminated in a variety of agricultural products. Camelid variable domain of heavy chain antibody (VHH) is a noteworthy reagent in immunoassay, owing to its excellent characteristics. Immunization of camelid animals is a straightforward strategy to produce VHHs. In this study, to avoid the dependence on the large animals, the camelized, murine antibody (cVHs) against AFB1 was prepared in vitro based on the identities between murine VH and camelid VHH and then to develop an immunoassay for AFB1. A murine anti-AFB1 VH fragment (VH-2E6) was selected for camelization through replacement of conserved hydrophobic residues in framework region 2 (FR2) (cVH-FR2), point mutation at position 103 in the FR4 region (cVH-103), and CDR3-grafted with a high AFB1-affinity VHH (cVH-Nb26). The cVH-Nb26 had a yield of 5 mg/L as refolded protein expressed from Escherichia coli and 10 mg/L expressed from Pichia pastoris. Compared with anti-AFB1 single-chain fragment variable (scFv) 2E6, cVH-Nb26 performed more than 20-fold enhancement of AFB1-binding interactions. Although the AFB1-affinity of cVH-Nb26 cannot meet the application requirement in the present form, our study provides effective strategies for preparation of camelized antibody in vitro, which could be a promising immunoreagent for AFB1 detection.

Recent Progress in Rapid Determination of Mycotoxins Based on Emerging Biorecognition Molecules: A Review

Mycotoxins are secondary metabolites produced by fungal species, which pose significant risk to humans and livestock. The mycotoxins which are produced from Aspergillus, Penicillium, and Fusarium are considered most important and therefore regulated in food- and feedstuffs. Analyses are predominantly performed by official laboratory methods in centralized labs by expert technicians. There is an urgent demand for new low-cost, easy-to-use, and portable analytical devices for rapid on-site determination. Most significant advances were realized in the field bioanalytical techniques based on molecular recognition. This review aims to discuss recent progress in the generation of native biomolecules and new bioinspired materials towards mycotoxins for the development of reliable bioreceptor-based analytical methods. After brief presentation of basic knowledge regarding characteristics of most important mycotoxins, the generation, benefits, and limitations of present and emerging biorecognition molecules, such as polyclonal (pAb), monoclonal (mAb), recombinant antibodies (rAb), aptamers, short peptides, and molecularly imprinted polymers (MIPs), are discussed. Hereinafter, the use of binders in different areas of application, including sample preparation, microplate- and tube-based assays, lateral flow devices, and biosensors, is highlighted. Special focus, on a global scale, is placed on commercial availability of single receptor molecules, test-kits, and biosensor platforms using multiplexed bead-based suspension assays and planar biochip arrays. Future outlook is given with special emphasis on new challenges, such as increasing use of rAb based on synthetic and naïve antibody libraries to renounce animal immunization, multiple-analyte test-kits and high-throughput multiplexing, and determination of masked mycotoxins, including stereoisomeric degradation products.

Enhancing the detection sensitivity of nanobody against aflatoxin B1 through structure-guided modification

Nanobodies (Nbs) have shown great potential in immunodetection of small-molecule contaminants in food and environmental monitoring. However, the limited knowledge of the mechanism of Nbs binding to small molecules has hampered the development of high-affinity Nbs and assay improvement. We previously reported two homologous nanobodies Nb26 and Nb28 specific to aflatoxin B₁ (AFB₁), with the former exhibiting higher sensitivity in ELISA. Herein, Nb26 was selected as the model antibody to resolve its solution nuclear magnetic resonance (NMR) structure, and investigate its AFB₁ recognition mechanism. The results revealed that Nb26 exhibits a typical immunoglobulin fold and its AFB₁-binding interface is uniquely located in complementarity-determining region 3 (CDR3) and framework region 2 (FR2). This finding was applied to improve the binding activity of Nb28 against AFB₁ by constructing two Nb28-based mutants A⁵⁰V and S¹⁰²D, resulting in 2.3- and 3.3-fold sensitivity enhancement over the wild type, respectively. This study develops an NMR-based strategy to analyze the underlying mechanism of Nb against AFB₁, and successfully generated two site-modified Nbs with improved detection sensitivity. It is believed that this work could greatly expand the applications of Nbs by providing a way to enhance the binding activity.

Development of a biotinylated nanobody for sensitive detection of aflatoxin B1 in cereal via ELISA

Aflatoxin B₁ (AFB₁) contamination is a severe threat to food safety and human health, and requires continuous monitoring. In this study, we developed a biotin-streptavidin-amplified enzyme-linked immunosorbent assay (BA-ELISA) by using biotinylated nanobody Nb26 and streptavidin-conjugated polymerized horseradish peroxide (SA-PolyHRP) for sensitive and rapid detection of AFB₁ in cereal. Under the optimal condition, the IC₅₀ value of the BA-ELISA was improved to 0.21 ng mL^-1 for AFB₁, satisfying the requirement of detection limit in practical applications. The total assay time of our strategy is reduced to 50 min from 2 h in conventional competitive ELISA. Additionally, the BA-ELISA saves as much as 98% of the antibody in comparison to the previous classic ELISA. Our work also demonstrated an interesting phenomenon that the biotinylated Nb26 achieved better selectivity to AFB₁, which could possibly result from the steric hindrance that interferes reaction between the Nb26 and the AFB₁ analogs. Furthermore, the assay was used to detect AFB₁ in two cereal samples, and the results were in good agreement with that obtained by high performance liquid chromatography. The developed BA-ELISA can be used for routine screening analysis of AFB₁, and offers a promising strategy for measuring low concentrations of food contaminants.

A sensitive electrochemical immunosensing interface for label-free detection of aflatoxin B1 by attachment of nanobody to MWCNTs-COOH@black phosphorene

A label-free electrochemical immunosensor has advantages of real-time and rapid detection, but it is weak in detection of small molecular toxins such as aflatoxin B₁ (AFB₁). The greatest obstacle to achieving this is that small molecules bound to a common immunosensing interface cannot interfere with electron transfer effectively and the detection signal is so weak. Therefore, a sensitive electrochemical immunosensing interface for small molecules is urgently needed. Here, we employed functionalized black phosphorene (BP) as electrode modification materials and anti-AFB₁ nanobody (Nb) as a biorecognition element to construct a very sensitive immunosensing interface towards small molecular AFB₁. The BP functionalized by carboxylic multi-walled carbon nanotubes (MWCNTs-COOH) via P-C bonding behaved with a satisfactory stability and good catalytic performance for the ferricyanide/ferrocyanide probe, while the small-sized Nb showed good compatibility with the functionalized BP and also had less influence on electron transfer than monoclonal antibody (mAb). Expectedly, the as-prepared immunosensing interface was very sensitive to AFB₁ detection by differential pulse voltammetry (DPV) in a redox probe system. Under optimized conditions, a linear range from 1.0 pM to 5.0 nM and an ultralow detection limit of 0.27 pM were obtained. Additionally, the fabricated immunosensor exhibited satisfactory stability, specificity, and reproducibility. The strategy proposed here provides a more reliable reference for label-free sensing of small molecules in food samples.

Binding Characteristic of Various Antibody Formats Against Aflatoxins

The application of recombinant antibodies for the analysis of foods and food contaminants is now a major focus, given their capacity to be engineered to tailor their specificity, enhance their stability, and modify their structural formats to fit the desired analytical platform. In this study, human scFv antibody fragments generated against aflatoxin B1 (AFB1) were selected as the model antibody to explore the effect of antibody formats on their binding activity and to evaluate their potential use as immunoreagents for food contaminant analysis. Four human scFv antibody fragments against aflatoxin B1 (AFB1), previously isolated and engineered by chain shuffling, were converted into various formats, that is, scFv-AP fusions, scFv-Fc, and whole IgG molecules. The result indicated that the effects of the antibody format on the binding property varied, depending on the sequence of scFv. For all of the scFv clones, the scFv-AP fusion format showed the highest sensitivity by competitive ELISA, while the effects on the binding activity after conversion to scFv-Fc or IgG format varied, depending on the amino acid sequence of the antibodies. The sAFH-3e3 antibodies that showed the best performance by competitive ELISA were selected for further investigation. The sAFH-3e3 was converted to the scFv-GFP format and tested by fluorescence-linked immunosorbent assay (FLISA), which showed that its binding property was equivalent to those of scFv-Fc and IgG formats. The potential applications of the sAFH-3e3 in a rapid test kit format based on ELISA (scFv-AP) and in a lateral flow immunochromatography assay (LFIA) (IgG) were demonstrated. A comparison of methods for the extraction of AFB1 from matrices for use with these assay formats indicated that PBS and TBST are better than 70% methanol.

Antibody conjugated magnetic nanoparticle based colorimetric assay for the detection and quantification of aflatoxin B1 in wheat grains

Aflatoxin B1 (AFB1) is a most potent carcinogenic secondary metabolite produced by Aspergillus flavus. As a food safety concern, development of a rapid, cost effective, sensitive and easy to use method for the detection of aflatoxin is of prime requirement. In this study, AFB1 was conjugated with bovine serum albumin (BSA), and AFB1-BSA conjugate was purified by HPLC. Purification was confirmed by UV-Vis spectroscopy, FTIR and MALDI-TOF mass spectrometry. The polyclonal antibody was raised against AFB1-BSA conjugate in rabbit and purified by protein A sepharose and BSA sepharose affinity columns. Iron oxide nanoparticles (MNPs) were synthesised by co-precipitation method and their surface was functionalised with (3-aminopropyl) triethoxysilane (APTES). Size of APTES conjugated MNPs was determined by electron microscopy, and characterised by several biophysical techniques. The purified anti-AFB1 antibody was conjugated with surface functionalised MNPs and the conjugation was confirmed by determining the sizes of free and antibody conjugated MNPs by field emission scanning electron microscope where increase of particle sizes from 10-20 to 40-50 nm was observed due to antibody conjugation. Anti-AFB1 antibody conjugated MNPs were used for capturing AFB1 from the aflatoxin spiked wheat grains with a recovery percentage of more than 80% and used effectively five times. The captured AFB1 was then quantified by a sensitive colorimetric assay where colourless AFB1 was first converted into coumaric acid by NaOH. Subsequently, coumaric acid reacted with 2,6-dibromoquinone-4-chloroimide (DBQC) to a green-coloured indophenol product which was quantified spectrophotometrically. AFB1 contamination as low as 2 μg/kg in wheat grains was detected by the developed technique suggesting its potential application for both qualitative and quantitative analysis of aflatoxins present in feed and food materials.

Developing Recombinant Antibodies by Phage Display Against Infectious Diseases and Toxins for Diagnostics and Therapy

Antibodies are essential molecules for diagnosis and treatment of diseases caused by pathogens and their toxins. Antibodies were integrated in our medical repertoire against infectious diseases more than hundred years ago by using animal sera to treat tetanus and diphtheria. In these days, most developed therapeutic antibodies target cancer or autoimmune diseases. The COVID-19 pandemic was a reminder about the importance of antibodies for therapy against infectious diseases. While monoclonal antibodies could be generated by hybridoma technology since the 70ies of the former century, nowadays antibody phage display, among other display technologies, is robustly established to discover new human monoclonal antibodies. Phage display is an in vitro technology which confers the potential for generating antibodies from universal libraries against any conceivable molecule of sufficient size and omits the limitations of the immune systems. If convalescent patients or immunized/infected animals are available, it is possible to construct immune phage display libraries to select in vivo affinity-matured antibodies. A further advantage is the availability of the DNA sequence encoding the phage displayed antibody fragment, which is packaged in the phage particles. Therefore, the selected antibody fragments can be rapidly further engineered in any needed antibody format according to the requirements of the final application. In this review, we present an overview of phage display derived recombinant antibodies against bacterial, viral and eukaryotic pathogens, as well as microbial toxins, intended for diagnostic and therapeutic applications.

Development of anti-human IgM nanobodies as universal reagents for general immunodiagnostics

Nanobodies are the smallest antibody fragments which bind to antigens with high affinity and specificity. Due to their outstanding physicochemical stability, simplicity and cost-effective production, nanobodies have become powerful agents in therapeutic and diagnostic applications. In this work, the advantages of nanobodies were exploited to develop generic and standardized anti-human IgM reagents for serology and IgM⁺ B-cell analysis. Selection of anti-IgM nanobodies was carried out by evaluating their yields, stability, binding kinetics and cross-reactivity with other Ig isotypes. High affinity nanobodies were selected with dissociation constants (KDs) in the nM range and high sensitivities for detection of total IgM by ELISA. The nanobodies also proved to be useful for capturing IgM in the serodiagnosis of an acute infection as demonstrated by detection of specific IgM in sera of dengue virus patients. Finally, due to the lack of an Fc region, the selected nanobodies do not require Fc receptor blocking steps, facilitating the immunophenotyping of IgM⁺ cells by flow cytometry, an important means of diagnosis of immunodeficiencies and B-cell lymphoproliferative disorders. This work describes versatile anti-IgM nanobodies that, due to their recombinant nature and ease of reproduction at low cost, may represent an advantageous alternative to conventional anti-IgM antibodies in research and diagnosis.