Exonuclease III-Assisted Cascade Signal Amplification Strategy for Label-Free and Ultrasensitive Chemiluminescence Detection of DNA

Bacterial exonuclease III expands its enzymatic activities on single-stranded DNA

Bacterial exonuclease III (ExoIII), widely acknowledged for specifically targeting double-stranded DNA (dsDNA), has been documented as a DNA repair-associated nuclease with apurinic/apyrimidinic (AP)-endonuclease and 3'→5' exonuclease activities. Due to these enzymatic properties, ExoIII has been broadly applied in molecular biosensors. Here, we demonstrate that ExoIII (Escherichia coli) possesses highly active enzymatic activities on ssDNA. By using a range of ssDNA fluorescence-quenching reporters and fluorophore-labeled probes coupled with mass spectrometry analysis, we found ExoIII cleaved the ssDNA at 5'-bond of phosphodiester from 3' to 5' end by both exonuclease and endonuclease activities. Additional point mutation analysis identified the critical residues for the ssDNase action of ExoIII and suggested the activity shared the same active center with the dsDNA-targeted activities of ExoIII. Notably, ExoIII could also digest the dsDNA structures containing 3'-end ssDNA. Considering most ExoIII-assisted molecular biosensors require the involvement of single-stranded DNA (ssDNA) or nucleic acid aptamer containing ssDNA, the activity will lead to low efficiency or false positive outcome. Our study revealed the multi-enzymatic activity and the underlying molecular mechanism of ExoIII on ssDNA, illuminating novel insights for understanding its biological roles in DNA repair and the rational design of ExoIII-ssDNA involved diagnostics.

Development of a rapid aptamer-chemiluminescence sensor for detecting glyphosate pesticide residue in soybeans

Glyphosate (GLY) is a widely used herbicide worldwide, particularly in cultivating genetically modified soybeans resistant to GLY. However, routine multi-residue analysis does not include GLY due to the complexity of soybean matrix components that can interfere with the analysis. This study presented the development of an aptamer-based chemiluminescence (Apt-CL) sensor for rapidly screening GLY pesticide residue in soybeans. The GLY-binding aptamer (GBA) was developed to bind to GLY specifically, and the remaining unbound aptamers were adsorbed onto gold nanoparticles (AuNPs). The signal was in the form of luminol-H2O2 emission, catalyzed by the aggregation of AuNPs in a chemiluminescent reaction arising from the GLY-GBA complex. The outcomes demonstrated a robust linear relationship between the CL intensity of GLY-GBA and the GLY concentration. In the specificity test of the GBA, only GLY and Profenofos were distinguished among the fifteen tested pesticides. Furthermore, the Apt-CL sensor was conducted to determine GLY residue in organic soybeans immersed in GLY as a real sample, and an optimal linear concentration range for detection after extraction was found to be between 0.001 and 10 mg/L. The Apt-CL sensor exploits the feasibility of real-time pesticide screening in food safety.

Sensing, Imaging, and Therapeutic Strategies Endowing by Conjugate Polymers for Precision Medicine

Conjugated polymers (CPs) have promising applications in biomedical fields, such as disease monitoring, real-time imaging diagnosis, and disease treatment. As a promising luminescent material with tunable emission, high brightness and excellent stability, CPs are widely used as fluorescent probes in biological detection and imaging. Rational molecular design and structural optimization have broadened absorption/emission range of CPs, which are more conductive for disease diagnosis and precision therapy. This review provides a comprehensive overview of recent advances in the application of CPs, aiming to elucidate their structural and functional relationships. The fluorescence properties of CPs and the mechanism of detection signal amplification are first discussed, followed by an elucidation of their emerging applications in biological detection. Subsequently, CPs-based imaging systems and therapeutic strategies are illustrated systematically. Finally, recent advancements in utilizing CPs as electroactive materials for bioelectronic devices are also investigated. Moreover, the challenges and outlooks of CPs for precision medicine are discussed. Through this systematic review, it is hoped to highlight the frontier progress of CPs and promote new breakthroughs in fundamental research and clinical transformation.

MOF-mediated dual energy transfer nanoprobe integrated with exonuclease III amplification strategy for highly sensitive detection of DNA

Accurate quantitative detection of DNA is an advanced strategy in various fields (such as disease diagnosis and environmental monitoring), but the classical DNA detection method usually suffers from low sensitivity, expensive thermal cyclers, or strict annealing conditions. Herein, a MOF-ERA platform for ultrasensitive HBV-DNA detection is constructed by integrating metal-organic framework (MOF)-mediated double energy transfer nanoprobe with exonuclease III (Exo III)-assisted target recycling amplification. The proposed double energy transfer containing a donor and two receptors is simply composed of MOFs (UiO-66-NH2, a well-studied MOF) modified with a signal probe formed by the hybridization of carboxyuorescein (FAM)-labeled DNA (FDNA) and black hole quencher (BHQ1)-terminated DNA (QDNA), resulting in low fluorescence signal. After the addition of HBV-DNA, Exo III degradation to FDNA is activated, leading to the liberation of the numerous FAM molecules, followed by the generation of a significant fluorescence signal owing to the negligible binding of MOFs with free FAM molecules. The results certify that the MOF-ERA platform can be successfully used to assay HBV-DNA in the range of 1.0-25.0 nM with a detection limit of 97.2 pM, which is lower than that without BHQ1 or Exo III. The proposed method with the superiorities of low background signal and high selectivity holds promise for early disease diagnosis and clinical biomedicine applications.

A sensitive "off-on" electrochemiluminescence DNA sensor based on signal cascade amplification circuit and distance-dependent energy transfer

A sensitive "off-on" electrochemiluminescence (ECL) DNA sensor was constructed based on Exo III-assisted cascade amplification system. In the cascade amplification circuit, target DNA and Exo III cutting substrate were designed into an inverted T-shaped binding mode to form a stable DNA junction, thus effectively triggering Exo III digestion cycle. During the biosensor assembly process, ferrocene (Fc) and distance-dependent ECL resonance energy transfer (ECL-RET) and surface plasmon resonance (SPR) effects were introduced to regulate the ECL of semiconductor quantum dots (QDs). Carboxylated ZnCdSe/ZnS QDs were used as ECL signal probes and K2S2O8 was coreactant, and the initial cathodic ECL signal of QDs was efficiently quenched through electron and energy transfer with Fc and ECL-RET with Au NPs, leaving the system in "off" state. After the products of cascade amplification were introduced into the electrode surface, the single-stranded DNA modified with Fc was displaced, and the distance between Au NPs and QDs became farther, resulting in a transition from ECL-RET to SPR, and then a significant ECL signal boost was achieved, turning the system into "on" state. The combination of efficient cascade amplification system and sensitive "off-on" ECL signal change mode enabled the biosensing platform to detect target DNA with high selectivity (able to distinguish single-base mutated DNA) and ultra-high sensitivity (limit of detection was 31.67 aM, S/N = 3), providing a new perspective for designing highly sensitive and programmable ECL biosensors.

Carbon Vacancy-Enhanced Activity of Fe-N-C Single Atom Catalysts toward Luminol Chemiluminescence in the Absence of H2O2

The classic luminol-H2O2 chemiluminescence (CL) systems suffer from easy self-decomposition of H2O2 at room temperature, hindering the practical applications of the luminol-H2O2 CL system. In this work, unexpectedly, we found that the carbon vacancy-modified Fe-N-C single atom catalysts (VC-Fe-N-C SACs) can directly trigger a luminol solution to generate strong CL emission in the absence of H2O2. The Fe-based SACs were prepared through the conventional pyrolysis of zeolitic imidazolate frameworks. The massive carbon vacancies were readily introduced into Fe-N-C SACs through a tannic acid-etching process. Carbon vacancy significantly enhanced the catalytic activity of Fe-N-C SACs on the CL reaction of luminol-dissolved oxygen. The VC-Fe-N-C SACs performed a 13.4-fold CL enhancement compared with the classic luminol-Fe2+ system. It was found that the introduction of a carbon vacancy could efficiently promote dissolved oxygen to convert to reactive oxygen species. As a proof of concept, the developed CL system was applied to detect alkaline phosphatase with a linear range of 0.005-1 U/L as well as a detection limit of 0.003 U/L. This work demonstrated that VC-Fe-N-C SAC is a highly efficient CL catalyst that can promote the analytic application of the luminol CL system.

A Double Hemin Bonded G-Quadruplex Embedded in Metal-Organic Frameworks for Biomimetic Cascade Reaction

Biocatalytic transformations in living cells, such as enzymatic cascades, function effectively in spatially confined microenvironments. However, mimicking enzyme catalytic cascade processes is challenging. Herein, we report a new dual-Hemin-G-quadruplex (dHemin-G4) DNAzyme with high catalytic activity over noncovalent G4/Hemin and monocovalent counterparts (G4-Hemin and Hemin-G4) by covalently linking hemin to both ends of an intramolecular G4. We use MAF-7, a hydrophilic metal-organic framework (MOF), as the protecting scaffold to integrate a biocatalytic cascade consisting of dHemin-G4 DNAzyme and glucose oxidase (GOx), by a simple and mild method with a single-step encapsulation of both enzymes. Such a MAF-7-confined cascade system shows superior activity over not only traditional G4/Hemin but also other MOFs (ZIF-8 and ZIF-90), which was mainly attributed to high-payload enzyme packaging. Notably, the introduction of hydrophilic G4 allows to avoid the accumulation of hydrophobic hemin on the surface of MAF-7, which decreases cascade biocatalytic activity. Furthermore, MAF-7 as protective coatings endowed the enzyme with excellent recyclability and good operational stability in harsh environments, including elevated temperature, urea, protease, and organic solvents, extending its practical application in biocatalysis. In addition, the incorporated enzymes can be replaced on demand to broaden the scope of catalytic substrates. Taking advantages of these features, the feasibility of dHemin-G4/GOx@MAF-7 systems for biosensing was demonstrated. This study is conducive to devise efficient and stable enzyme catalytic cascades to facilitate applications in biosensing and industrial processes.

Oxygen Vacancy-Dependent Chemiluminescence: A Facile Approach for Quantifying Oxygen Defects in ZnO

Defect engineering is an effective strategy to improve the catalytic activity of metal oxides, and quantitative characterization of surface defects is thus vital to the understanding and application of metal oxide catalysts. Herein, we found that ZnO nanoparticles with oxygen vacancy could trigger the luminol-H₂O₂ system to emit a strong chemiluminescence (CL), and the CL intensity was strongly dependent on the oxygen vacancy of the ZnO nanoparticles. The mechanism of this CL reaction was discussed by means of the electron-spin resonance spectrum, X-ray photoelectron spectrum (XPS), and CL spectrum. The oxygen vacancy-dependent CL was attributed to the ability of the oxygen vacancy to readily adsorb and further dissociate H₂O₂ into active ^•OH radicals. Taking advantage of this oxygen vacancy-dependent CL, we presented one method for quantifying the oxygen defects in ZnO. Compared with the current evaluation techniques (XPS and Raman spectroscopy), this CL method is rapid, low-cost, and easy to operate. This work introduces the CL technique into the field of material structure-property evaluation, and provides a new approach for exploring the defect function in ZnO defect engineering.

DNAzyme-based cascade signal amplification strategy for highly sensitive detection of lead ions in the environment

Lead ions are one of many common environmental pollutants, that can cause posing a serious threat to people's health, thus, their efficient and sensitive detection is important. We propose a cascade signal amplification sensor using a DNAzyme-based strand displacement amplification (SDA) and hybridization chain reaction (HCR) for the high-sensitivity detection of Pb²⁺. In the demonstrated sensor system, the target metal ion can activate DNAzyme to cause a strand displacement reaction. Under the synergistic action of polymerase and nickase, large numbers of DNA strands are generated that can initiate HCR. The subsequent HCR can restore the fluorescence intensity of the FAM quenched for the fluorescence resonance energy transfer effect, which exhibits a strong fluorescence signal. The DNAzyme-based sensor allowed the detection of Pb²⁺ down to 16.8 pM and resulted in a good dynamic line relationship ranging from 50 pM to 500 nM, and the biosensor also showed good selectivity. Furthermore, we confirmed that the proposed sensor can still detect lead ions in complex environments such as lake water, milk, and serum. We believe these findings will provide new ideas for the detection of toxic elements ions in the environment and food.

Construction of a fluorescence biosensor for ochratoxin A based on magnetic beads and exonuclease III-assisted DNA cycling signal amplification

Specific and sensitive detection of hazardous mycotoxins in agricultural crops is one of the most important goals of food safety. A fluorescence biosensor for sensitive detection of ochratoxin A (OTA) was constructed via magnetic beads and the exonuclease III (Exo III)-assisted trigger DNA circle amplification approach. Exo III-assisted trigger DNA circle amplification can be utilized as an effective strategy for the sensitive detection of OTA. The employment of streptavidin labeled magnetic beads offers a manner for the accumulation and separation of the hairpin signal probe sDNA-FAM in solution. After target specific recognition, the aptamers combined with OTA were released and the remaining block DNA (bDNA) probes captured the signal probes on magnetic bead modified fluorophores. Subsequently, the enzyme digestion reaction leads to the fluorophore free solution. Exo III-assisted DNA circle amplification contributed to the high sensitivity of the presented OTA fluorescence aptasensor. The experimental results demonstrate that the aptasensor is sensitive with the limit of detection as low as 0.28 ng mL^-1 for OTA, which was lower than that of the proposed aptasensors reported by the other literature on fluorescence methods. Additionally, the developed aptasensor with the diverse aptamer sequence shows promising potential applications in food monitoring.

Highly Sensitive Biosensing Applications of a Magnetically Immobilizable Covalent G-Quadruplex-Hemin DNAzyme Catalytic System

G-quadruplex/hemin (G4/hemin) DNAzymes are biosensing systems, but their application remains limited by an overall low activity and a rather high level of unwarranted background reactions. Here, these issues were addressed through the rational design of F3T-azaC-hemin, a G4-based construct in which the hemin is covalently linked to the G4 core and its binding site flanked with a nucleotide activator, here d(T-azaC). This design led to a G4-DNAzyme whose performances have been ca. 150-fold increased compared to the parent G4-based system. The utility of F3T-azaC-hemin was demonstrated here through the ultrasensitive chemiluminescent detection of miRNA-221. The limit of detection (LOD) has been decreased to the femtomolar range, making it a new and highly efficient molecular tool in the biosensing technology field.

Recent advances and challenges of biosensing in point-of-care molecular diagnosis

Molecular diagnosis, which plays a major role in infectious disease screening with successful understanding of the human genome, has attracted more attention because of the outbreak of COVID-19 recently. Since point-of-care testing (POCT) can expand the application of molecular diagnosis with the benefit of rapid reply, low cost, and working in decentralized environments, many researchers and commercial institutions have dedicated tremendous effort and enthusiasm to POCT-based biosensing for molecular diagnosis. In this review, we firstly summarize the state-of-the-art techniques and the construction of biosensing systems for POC molecular diagnosis. Then, the application scenarios of POCT-based biosensing for molecular diagnosis were also reviewed. Finally, several challenges and perspectives of POC biosensing for molecular diagnosis are discussed. This review is expected to help researchers deepen comprehension and make progresses in POCT-based biosensing field for molecular diagnosis applications.

Recent advances in the exonuclease III-assisted target signal amplification strategy for nucleic acid detection

The detection of nucleic acids has become significantly important in molecular diagnostics, gene therapy, mutation analysis, forensic investigations and biomedical development, and so on. In recent years, exonuclease III (Exo III) as an enzyme in the 3'-5' exonuclease family has evolved as a frequently used technique for signal amplification of low level DNA target detection. Different from the traditional target amplification strategies, the Exo III-assisted amplification strategy has been used for target DNA detection through directly amplifying the amounts of signal reagents. The Exo III-assisted amplification strategy has its unique advantages and characters, because the character of non-specific recognition of Exo III can overcome the limitation of a target-to-probe ratio of 1 : 1 in the traditional nucleic acid hybridization assay and acquire higher sensitivity. In this review, we selectively discuss the recent advances in the Exo III-assisted amplification strategy, including the amplification strategy integrated with nanomaterials, biosensors, hairpin probes and other nucleic acid detection methods. We also discuss the strengths and limitations of each strategy and methods to overcome the limitations.

Nucleic Acid Tests for Clinical Translation

Nucleic acids, including deoxyribonucleic acid (DNA) and ribonucleic acid (RNA), are natural biopolymers composed of nucleotides that store, transmit, and express genetic information. Overexpressed or underexpressed as well as mutated nucleic acids have been implicated in many diseases. Therefore, nucleic acid tests (NATs) are extremely important. Inspired by intracellular DNA replication and RNA transcription, in vitro NATs have been extensively developed to improve the detection specificity, sensitivity, and simplicity. The principles of NATs can be in general classified into three categories: nucleic acid hybridization, thermal-cycle or isothermal amplification, and signal amplification. Driven by pressing needs in clinical diagnosis and prevention of infectious diseases, NATs have evolved to be a rapidly advancing field. During the past ten years, an explosive increase of research interest in both basic research and clinical translation has been witnessed. In this review, we aim to provide comprehensive coverage of the progress to analyze nucleic acids, use nucleic acids as recognition probes, construct detection devices based on nucleic acids, and utilize nucleic acids in clinical diagnosis and other important fields. We also discuss the new frontiers in the field and the challenges to be addressed.

DNA-targeted formation and catalytic reactions of DNAzymes for label-free ratiometric electrochemiluminescence biosensing

A label-free ratiometric electrochemiluminescence (ECL) sensing strategy for the sensitive detection of target DNA (T-DNA) was proposed on the basis of G-quadruplex/hemin-regulated ECL emissions of CdS quantum dots (QDs) and luminol with their common coreactant of H₂O₂. The ECL biosensor was constructed through stepwise assemblies of CdS QDs and hairpin DNA (H-DNA) on a glassy carbon electrode, and subsequent introduction of T-DNA resulted in the development of G-quadruplex/hemin DNAzymes via the specific recognition of T-DNA and H-DNA in the presence of hemin and K⁺ ions. The formed DNAzymes not only prompted the catalytic oxidation of hydroquinone followed by deposition of insoluble oxidation oligomers on the electrode surface to attenuate the cathodic ECL emission of CdS QDs but also triggered the catalytic oxidation of luminol to enhance the anodic ECL emission. The label-free ratiometric ECL biosensor for the detection of T-DNA showed a wide response range from 1 to 10,000 fM (10^-15 M) with a low detection limit of 0.2 fM and exhibited excellent selectivity against mismatched base sequences. This work provides a reliable and sensitive sensing platform for the detection of targets in analytical community by means of rational design of DNA sequences.

Engineering WS2–Au–HRP-assisted multiple signal amplification strategy for chemiluminescence immunoassay of prostate specific antigen

Engineering of a WS₂–Au–HRP-assisted multiple signal amplification strategy for CL immunoassay of PSA.

A novel chemiluminescence imaging immunosensor for prostate specific antigen detection based on a multiple signal amplification strategy

A novel chemiluminescence (CL) imaging platform was constructed for prostate specific antigen (PSA) detection in a multiple signal amplifying manner. To construct the platform, the primary antibody for PSA was firstly immobilized on a O-ring area of a glass slide for recognizing the PSA. The horseradish peroxidase (HRP) and the secondary antibody of PSA (Ab₂) functionalized Au NPs (HRP-Au NPs-Ab₂) were modified on the platform through immunoreaction between PSA and Ab₂. The excellent catalytic effect of Au NPs and HRP on the HRP-Au NPs-Ab₂ to the luminol-H₂O₂ CL system provided the dual-signal amplification for PSA detection. To further enhance the sensitivity, tyramine signal amplification (TSA) strategy was introduced: tyramine-HRP conjugates were added into the O-ring reservoir and thus tyramine-HRP repeats formed in the presence of H₂O₂, generating a multiple signal amplification because of the large amounts of HRP on the sensing interface. The excellent performance of HRP-Au NPs-Ab₂ and TSA strategy endows the CL platform with high sensitivity. The PSA was detected with a photomultiplier tube (PMT) and visually analyzed by a charge coupled device (CCD), respectively. The linear ranges of PMT and CCD for PSA are 0.1-100.0 ng mL^-1 with a detection limit of 0.05 pg mL^-1 and 0.5 - 100.0 ng mL^-1 with a detection limit of 0.1 pg mL^-1, respectively. The levels of PSA in several human serum samples were determined and the recoveries are ranged from 82.5% - 117.0%. This CL immunosensing platform holds great potential for bioactive molecules detection visually and sensitively.

A simple, one-pot and ultrasensitive DNA sensor via Exo III-Assisted target recycling and 3D DNA walker cascade amplification

Rapid, sensitive, and user-friendly nucleic acid detection is of growing importance in early clinical diagnosis. Here, we construct a simple, one-pot and ultrasensitive DNA sensor via exonuclease III (Exo III)-assisted target recycling amplification (ERA) combined with 3D DNA walker cascade amplification. In the presence of single-stranded DNA target, the ERA process is activated to generate numerous walker strands (WS). Thereafter, Exo III-powered WSs autonomously move along magnetic bead (MB)-based 3D track to release numerous AgNCs into the supernatant as an amplified signal output. This biosensor had a low detection limit of 18 fM and an analytical range of 40 fM to 1 pM. Furthermore, the practical application potential of this biosensor was also confirmed by the spiking experiments of p53 into human serum and urine samples.

Novel electrochemiluminescence solid-state pH sensor based on an i-motif forming sequence and rolling circle amplification

Based on a pH-dependent i-motif forming sequence and rolling circle amplification (RCA) strategy, a novel electrochemiluminescence (ECL) solid-state pH sensor was proposed herein. The sensor showed a wide dynamic response range from pH 4 to 7.4. Furthermore, our sensor could be used to determine glucose, demonstrating its practical applicability.

Cascaded multiple recycling amplifications for aptamer-based ultrasensitive fluorescence detection of protein biomarkers

Highly sensitive detection of molecular biomarkers plays a significant role in diagnosing various types of diseases at the early stage. We demonstrated in this paper an ultrasensitive aptamer-based fluorescence method for detecting mucin 1 (MUC1) in human serum via a cascaded multiple recycling signal amplification strategy. The MUC1 target molecules present in the samples cause structure switching of the hairpin aptamer probes, which initiates three cascaded recycling cycles for the cleavage of the fluorescently quenched signal probes to recover significant fluorescence for highly sensitive detection of MUC1. The developed method has a linear range from 100 fM to 1 nM for MUC1 detection. Besides, owing to the substantial signal amplification by the integrated and cascaded recycling cycles, a low detection limit of 35 fM is achieved with high selectivity. Moreover, the monitoring of trace MUC1 in human serum can also be realized with such a method, indicating its great potential for highly sensitive detection of different disease biomarkers.

Biosensor platforms for rapid HIV detection

Human immunodeficiency virus (HIV), a type of lentivirus (a subgroup of retrovirus), causes acquired immunodeficiency syndrome (AIDS). This pathophysiologic state destroys the immune system allowing opportunistic infections, cancer and other life-threatening diseases to thrive. Although many analytic tools including enzyme-linked immunoassay (ELISA), indirect and line immunoassay, Western blotting, radio-immunoprecipitation, nucleic acid amplification testing (NAAT) have been developed to detect HIV, recent developments in nanosensor technology have prompted its use as a novel diagnostic approach. Nanosensors provide analytical information about behavior and characteristics of particles by using biochemical reactions mediated by enzymes, immune components, cells and tissues. These reactions are transformed into decipherable signals, i.e., electrical, thermal, optical, using nano to micro scale technology. Nanosensors are capable of both quantitative and qualitative detection of HIV, are highly specific and sensitive and provide rapid reproducible results. Nanosensor technology can trace infant infection during mother-to-child transmission, the latent HIV pool and monitor anti-HIV therapy. In this chapter, we review nanosensor analytics including electrochemical, optical, piezoelectric, SERS-based lateral flow assay, microfluidic channel-based biosensors in the detection of HIV. Other techniques in combination with different biorecognition elements (aptamers, antibodies, oligonucleotides) are also discussed.

A label-free "SEF-FRET" fluorescent sensing platform for ultrasensitive DNA detection based on AgNPs SAMs

In this paper, deoxyribonucleic acid (DNA) with different lengths were used to control the distance between carbon dots (CDs) and silver nanoparticles (AgNPs) in self-assembled multilayers (SAMs). Surface-enhanced fluorescence and fluorescence resonance energy transfer (SEF-FRET) could be achieved based on changing DNA strands. The fluorescence intensity of CDs SAMs with 6-base DNA strands could be enhanced up to ca. 5.6 times by AgNPs. As-fabricated CDs SAMs with excellent luminescent properties, superior stability have been employed for the development of a label-free fluorescence sensing platform for DNA detection. Since DNA would hybridize with the complemented one which was attached on the surface of SAMs, resulting in a close distance between CDs and AgNPs, FRET could thus occur between AgNPs and CDs, resulting in quenching the fluorescence of CDs SAMs. This sensitive sensing platform could show excellent analytical performance for detecting DNA with a linear response ranging from 93.07 pM to 5.433 nM and a detection limit of 16.36 pM, which could be further employed to probe human blood samples. This could prove a promising method for the detection of DNA.

Construction of an Autonomous Nonlinear Hybridization Chain Reaction for Extracellular Vesicles-Associated MicroRNAs Discrimination

Extracellular vesicles (EVs) have emerged as promising tumor biomarkers for early cancer diagnosis, as primary tumor-secreted EVs carry characteristic molecular information on parent cells. It is thus desirable to realize the efficient discrimination of the signatured EVs-associated microRNAs (miRNAs) with low expression and subtle variation. Here, we introduce an autonomous nonlinear enzyme-free signal amplification paradigm for EVs discrimination through a highly sensitive and selective detection of their inherent miRNAs in situ. Our proposed amplifier consists of a modularized DNAzyme-amplified two-stage cascaded hybridization chain reaction (CHCR-DNAzyme) circuit, where the analyte-generated output of the preceding hybridization chain reaction (HCR1) stage serves as input to motivate the following hybridization chain reaction (HCR2) stage and the concomitant assembly of numerous DNAzyme biocatalysts. By incorporating a flexibly configurable sensing module, this modular CHCR-DNAzyme circuit can further extend to "plug-and-play" sensing mode that enables the miRNA assay with high specificity. The sophisticated design and the detecting performance of our CHCR-DNAzyme scheme were systematically investigated in vitro. The optimized CHCR-DNAzyme system was further applied for distinguishing EVs derived from different cells through the amplified detection of a putative miRNA biomarker in EVs. This compact CHCR-DNAzyme amplifier provides a universal and facile toolbox for highly efficient identification of multiple miRNAs-involved EVs and thus holds great potential for early cancer diagnosis.

Chemiluminescence of Oleic Acid Capped Black Phosphorus Quantum Dots for Highly Selective Detection of Sulfite in PM2.5

Quantum dots (QDs), especially metal-free QDs with their unique optoelectronic properties, environmental friendliness, and excellent biocompatibility, have opened a new avenue to explore novel chemiluminescence (CL) systems for analytical applications. However, the unknown CL properties, relatively weak emission, and instability of some of them in water (e.g., black phosphorus QDs) often seriously hinder their further practical applications. Chemical modification trends have offered new properties for materials and have been proved to be desirable ways to establish sensing platforms with improved sensitivity and stability. Herein, oleic acid capped black phosphorus QDs (OA-BP QDs) with improved stability and optical properties were successfully synthesized. More importantly, an extraordinary CL emission when OA-BP QDs reacted with SO₃^2- was first observed. In the CL process, OA-BP QDs acted as the catalyst to trigger singlet oxygen (¹O₂) generation in NaHSO₃, and then a chemiluminescence resonance energy transfer (CRET) between (¹O₂)₂* (¹O₂ dimeric aggregate) and OA-BP QDs was produced. On this basis, a new CL system for directly monitoring SO₃^2- in airborne fine particulate matter (PM_2.5) was fabricated. The study opens attractive perspectives of modified metal-free QDs for the practice of CL in monitoring the chemical species in PM_2.5.

Chemiluminescence and Bioluminescence Imaging for Biosensing and Therapy: In Vitro and In Vivo Perspectives

Chemiluminescence (CL) and bioluminescence (BL) imaging technologies, which require no external light source so as to avoid the photobleaching, background interference and autoluminescence, have become powerful tools in biochemical analysis and biomedical science with the development of advanced imaging equipment. CL imaging technology has been widely applied to high-throughput detection of a variety of analytes because of its high sensitivity, high efficiency and high signal-to-noise ratio (SNR). Using luciferase and fluorescent proteins as reporters, various BL imaging systems have been developed innovatively for real-time monitoring of diverse molecules in vivo based on the reaction between luciferin and the substrate. Meanwhile, the kinetics of protein interactions even in deep tissues has been studied by BL imaging. In this review, we summarize in vitro and in vivo applications of CL and BL imaging for biosensing and therapy. We first focus on in vitro CL imaging from the view of improving the sensitivity. Then, in vivo CL applications in cells and tissues based on different CL systems are demonstrated. Subsequently, the recent in vitro and in vivo applications of BL imaging are summarized. Finally, we provide the insight into the development trends and future perspectives of CL and BL imaging technologies.

Ultrasensitive and simple fluorescence biosensor for detection of the mecA gene of Staphylococcus aureus by using an exonuclease III-assisted cascade signal amplification strategy

In this work, a label-free fluorescence biosensor for ultrasensitive and simple detection of the mecA gene of Staphylococcus aureus was proposed by using an exonuclease III (Exo III)-assisted cascade signal amplification strategy. The 3' end-extruding hairpin probe (HP) acted as the target recognition element and the caged G-quadruplex was used as the signal reporter. Without the mecA gene, the HP probe cannot be digested by Exo III, as the G-rich sequences are blocked in the stem of the HP probe. In the presence of the mecA gene, the hybridization of the mecA gene with the 3' end-extruding HP probe triggers the digestion reaction of Exo III, liberating the mecA gene and the mecA gene analogue. Both the released mecA gene and the mecA gene analogue can hybridize with other HP probes and activate another round of the cleavage reaction. Consequently, the released free G-quadruplex is "lit up" by N-methylmesoporphyrin IX (NMM), displaying a dramatically enhanced fluorescence intensity. This sensing platform showed a high sensitivity towards the mecA gene with a detection limit as low as 2.4 fM without any labelling, immobilization, or washing steps. The designed sensing system also exhibits excellent selectivity for the mecA gene in the presence of other interfering DNA sequences. Furthermore, the presented biosensor is robust and has been successfully applied for the detection of the mecA gene in a real food sample with satisfactory results. Owing to its simplicity, cost-effectiveness and ultrasensitivity, our proposed sensing strategy provides a promising platform for the detection of other genes by substituting the target-recognition element.

Exonuclease III-assisted multiple cycle amplification for the sensitive detection of DNA with zero background signal

Detection of low-abundant DNA is essential for disease diagnosis and treatment. DNA polymerase-based amplification is frequently used due to its excellent sensitivity, but it suffers from time-consuming and labour-intensive procedures, complex template/primer design, and inherent nonspecific amplification. Alternatively, Exonuclease III (Exo III)-assisted target recycling provides a new approach for DNA assay because of its simplicity and general applicability, but it suffers from high background signal due to the nonspecific Exo III digestion and poor sensitivity due to single cycle signal amplification. Herein, we demonstrate the development of Exo III-assisted multiple cycle amplification (exonuclease chain reaction) for the sensitive detection of DNA with zero background signal. The binding of single-stranded DNA binding protein (SSB) to the hairpin probes can protect them from nonspecific digestion by Exo III, resulting in near zero background signal. The presence of the target DNA initiates the Exo III-triggered multiple cycle amplification, enabling the achievement of high sensitivity with a detection limit of 3 fM and excellent selectivity with single base mismatch discrimination capability, holding great potential in disease diagnosis and biomedical research.

Bipedal DNA walker mediated enzyme-free exponential isothermal signal amplification for rapid detection of microRNA

This work reported an electrochemiluminescence (ECL) biosensor based on a bipedal DNA walker mediated enzyme-free exponential isothermal DNA signal amplification, which achieved sensitive and rapid detection of microRNA (miRNA).

Ultrasensitive Simultaneous Detection of Multiplex Disease-Related Nucleic Acids Using Double-Enhanced Surface-Enhanced Raman Scattering Nanosensors

Developing ultrasensitive probes holds great significance for simultaneous detection of multiplexed cancer-associated nucleic acids. Bimetallic nanoparticles containing silver may be exploited as nanoprobes for disease detection, which can produce stable and strong surface-enhanced Raman scattering (SERS) signals. However, it remains extremely challenging that such SERS nanoprobes are directly synthesized. Herein gold-silver nanosnowmen, grown via a DNA-mediated approach and attached to thiol-containing Raman dyes, are successfully synthesized. Stable SERS-enhanced gold substrates are also prepared and used as the enriching containers, where the capture DNAs are tethered to sense the target genes jointly enhanced by the SERS nanoprobes in a sandwich hybridization assay. This means detection of the target gene can obtain a limit of detection close to 0.839 fM. Such double-enhanced SERS nanosensors are further employed to simultaneously detect the three types of prostate carcinoma-related genes with high sensitivity and specificity, which meanwhile exhibit robust capacity of resisting disturbance in practical samples. Simultaneous and multiplexed detection of cancer-related genes may provide further biomedical applications with new opportunity.

A homogeneous electrochemical sensor for Hg2+ determination in environmental water based on the T-Hg2+-T structure and exonuclease III-assisted recycling amplification

A simple, fast, sensitive, and homogeneous electrochemical sensor based on the T-Hg2+-T structure and exonuclease III-assisted recycling amplification has been constructed for mercury ion (Hg2+) detection. The cT and methylene blue-labeled DNA probes (MB-TDNA) were designed to contain poly T sequences, which were repulsed from the negatively charged indium tin oxide (ITO) electrode due to their abundant negative charges. Hg2+ could trigger the formation of double-stranded DNA (dsDNA) between two DNA probes owing to the stable T-Hg2+-T structure. Then, Exo III specifically recognizes the cleavage of the double-stranded structure to release a methylene blue-labeled mononucleotide fragment (MB-MF). Moreover, the release of the target Hg2+ induces new hybridization and produces a large number of MB-MFs; MB-MFs are not repulsed by the negatively charged ITO electrode surface, thus producing a significant current signal. Under optimal conditions, the differential pulse voltammetric (DPV) response had a linear relationship with the logarithm of Hg2+ concentration in the range of 1.0 nM-0.5 μM, and the proposed method displayed great applicability for detecting Hg2+ in tap-water samples.

An ultrasensitive electrochemiluminescence biosensor for detection of MicroRNA by in-situ electrochemically generated copper nanoclusters as luminophore and TiO2 as coreaction accelerator

Herein, we constructed an ultrasensitive electrochemiluminescence (ECL) biosensor for detecting microRNA-21 (miR-21) based on in-situ generation of copper nanoclusters (Cu NCs) as luminophore and titanium dioxide (TiO₂) as coreaction accelerator. First, numerous AT-rich double-stranded DNA (dsDNA) was produced from the conversion of a small amount of target miR-21 via the combination of exonuclease III (Exo III)-assisted amplification and hybridization chain reaction (HCR), which could reduce the aggregation-caused self-etching effect of Cu NCs and improve the emitting of Cu NCs. Simultaneously, the introduction of TiO₂ in the sensing interface not just acted as the immobilizer of dsDNA-stabilized Cu NCs, more than acted as the coreaction accelerator to accelerate the reduction of the coreaction reagent (S₂O₈^2-) for significantly enhancing the ECL efficiency of Cu NCs. The biosensor showed an excellent linear relationship in the concentration range from 100 aM to 100 pM with the detection limit of 19.05 aM Impressively, the strategy not only opened up a novel and efficient preparation method for the Cu NCs, but expanded the application of Cu NCs in ultrasensitive biodetection owing to the addition of coreaction accelerator.

Highly Sensitive Electrochemical Detection of Tumor Exosomes Based on Aptamer Recognition-Induced Multi-DNA Release and Cyclic Enzymatic Amplification

Sensitive and specific detection of tumor exosomes is of great significance for early cancer diagnosis. In this paper, we report an aptamer strategy for exosome detection based on aptamer recognition-induced multi-DNA release and cyclic enzymatic amplification. First, we use aptamer-magnetic bead bioconjugates to capture tumor exosomes derived from LNCaP cells, leading to the release of three kinds of messenger DNAs (mDNAs). After magnetic separation, the released mDNAs hybridized with the probe DNAs immobilized on a gold electrode. Electroactive Ru(NH₃)₆³⁺ was used as the signal reporter because of its electrostatic attraction to DNA. Subsequent Exo III cyclic digestion caused the electrochemical signal to "turn off". Because the electrochemical signal reflects the concentration of Ru(NH₃)₆³⁺ and the concentration of Ru(NH₃)₆³⁺ is correlated with the mDNA concentration, which is correlated with the exosome concentration, the tumor exosomes can be detected by examining the decrease in the peak current of Ru(NH₃)₆³⁺. In this paper, the signal was amplified by the numerous mDNAs released from the magnetic bead and the Exo III-assisted mDNA recycling. Under the optimal conditions, a detection limit down to 70 particles/μL was achieved, which is lower than the LODs of most currently available methods. Furthermore, this assay can be used to detect tumor exosomes in complex biological samples, demonstrating potential application in real sample diagnosis.

Electrophoresis separation assisted G-quadruplex DNAzyme-based chemiluminescence signal amplification strategy on a microchip platform for highly sensitive detection of microRNA

We have developed an electrophoresis separation assisted G-quadruplex DNAzyme-based chemiluminescence (CL) signal amplification strategy on a microchip platform for the detection of trace microRNA. This strategy exhibits high sensitivity and specificity for detection of target molecules.

Highly sensitive detection of nucleic acids using a cascade amplification strategy based on exonuclease III-assisted target recycling and conjugated polyelectrolytes

A ratiometric and cascade amplification strategy that combines the signal amplification and effecitive FRET property of CPEs with the Exo III-assisted target recycling method has been developed for DNA detection.

A new photoelectrochemical biosensor for ultrasensitive determination of nucleic acids based on a three-stage cascade signal amplification strategy

Based on a “signal-on” sensing strategy and a three-stage cascade signal amplification method, an ultrasensitive photoelectrochemical biosensor has been developed for DNA detection.

Exonuclease III-boosted cascade reactions for ultrasensitive SERS detection of nucleic acids

A variety of nucleic acid amplification techniques have been integrated into different detection methods to promote the development of sensitive and convenient analysis of nucleic acids. However, it is still in urgent need to develop amplified nucleic acid biosensors for the analysis of susceptible gene and even distinguishing single-base mismatched DNA in complex biological samples. Benefiting from the achieved detection strategies, here we boost isothermal nucleic acid amplification by resorting to enzyme amplification, and combine this two-stage amplification method with surface-enhanced Raman spectroscopy (SERS) to develop a signal-on nucleic acid detection platform. Due to the high cleavage efficiency of Exonuclease III (Exo III), a large amount of trigger DNA are produced to initiate multiple hybridization chain reaction circles. The product structure tagged with Tamra is then anchored onto the plasmonic SERS substrate and meanwhile enriched. It is demonstrated that this detection platform is sensitive toward the myocardial infarction disease related gene. A detection limit of 1 fM for the gene analysis in a linear relationship in the wide range from 1 fM to 10nM is achieved, better than most of previous counterparts. Meanwhile, our developed detection platform exhibits a high selectivity for the target gene over mismatched analogues. Our strategy provides a robust tool for signal amplification of gene detection even in blood samples.