Ultrasensitive and highly selective detection of bioaccumulation of methyl-mercury in fish samples via Ag⁰/Hg⁰ amalgamation

The Impact of Various Types of Cooking on the Fate of Hg and Se in Predatory Fish Species

This study addresses the effect of various cooking approaches on total Hg (HgT) and total Se (SeT) contents in three predatory fish species. For this purpose, samples of swordfish, dogfish, and tuna from regular French (fish) markets were cooked by boiling, steaming, grilling, and frying, respectively. The levels of HgT and SeT in raw and cooked samples were determined by inductively coupled plasma-mass spectrometry. The data showed a significant increase in HgT and SeT levels between raw and cooked samples (33% of the samples for SeT and 67% for HgT) due to the water loss during the cooking. High intra-species variation related to HgT and SeT levels was found. Considering the level of exposure to HgT through fish consumption and taking also into account the possible protective effect of Se (expressed here via the Se/Hg molar ratio), the safest cooking approach corresponds to grilled swordfish, fried tuna, and steamed dogfish, which show Se/Hg molar ratios of (1.0 ± 0.5), (4.3 ± 4.2), and (1.0 ± 0.6), respectively.

A SYBR Green I-based aptasensor for the label-free, fluorometric, and anti-interference detection of MeHg. Anal Bioanal Chem 2024;416:299-311. [PMID: 37932512 DOI: 10.1007/s00216-023-05018-6] [Citation(s) in RCA: 0] [Impact Index Per Article: 0]

Methylmercury (MeHg+) is a common form of organic mercury that is substantially more toxic than inorganic mercury and is more likely to accumulate in organisms through biological enrichment. Therefore, developing a method to enable the specific and rapid detection of MeHg+ in seafood is important and remains challenging to accomplish. Herein, a rapid, label-free fluorescence detection method for MeHg+ determination was developed based on SYBR Green I. The detection system implemented "add and measure" detection mode can be completed in 10 min. Under optimal assay conditions, the detection platform showed a linear relationship with the concentration of MeHg+ within 1-50 nM (Y = 8.573x + 42.89, R2 = 0.9928), with a detection limit of 0.3218 nM. The results obtained for competitive substances, such as inorganic mercury ions and anions, show a high specificity of the method. In addition, this method successfully detected MeHg+ in seawater and marine products, with an accompanying spike recovery rate of 96.45-105.1%.

Simple and green approach for photoluminescent carbon dots prepared from faba bean seeds as a luminescent probe for determination of Hg+ ions and cell imaging

In this research, for the first time, a dedicated sensor was designed to detect Hg+ ions using photoluminescent carbon dots (CDs). Due to the preferred green synthesis of CDs from bio-resources, carbohydrate-rich faba bean seeds as a potential carbon precursor were applied to the synthesis of CDs. The CDs were prepared from the faba bean seeds using the hydrothermal method in an aqueous solution in the absence of substances such as an acid or base and any other additives. The synthesized CDs exhibited maximum emission intensity at 387 nm when excited at 310 nm and their luminescence quantum yield was calculated to be ~5.94%. Then, the fluorescence emission of CDs was examined in the presence of different metal ions. Results revealed that the CDs had good selectivity towards the Hg+ ions, so the fluorescence emission was significantly changed in the presence of these ions with a limit of detection (LOD) as low as 0.35 μM. Furthermore, because of their very low cytotoxicity, these CDs can be applied for cell imaging.

A broad-applicability method for mercury speciation in various seafoods using microwave-assisted extraction and ion chromatography-inductively coupled plasma mass spectrometry

Almost all marine organisms contain both inorganic and organic mercury, and thus it is extremely important to determine mercury species in seafood to objectively and scientifically assess the health risk posed by mercury. We herein developed a broad-applicability microwave-assisted extraction method and a robust ion chromatography-inductively coupled plasma mass spectrometry (IC-ICP-MS) method for the speciation analysis of mercury in various seafood samples including seaweeds, fishes and shellfishes. The extraction method has broad adaptability, it can be used to simultaneously extract mercury species from various seafood samples including seaweeds, fishes and shellfishes without altering the chemical species of mercury, with an extraction efficiency >90%. Especially, the seafood extract obtained with the extraction method can be directly used for the following IC-ICP-MS determination of mercury species without additional pretreatment. The IC-ICP-MS method used low-cost cation guard columns as the separation column, and has an instrument detection limit of 0.02-0.05 ng mL^-1 for Hg²⁺, CH₃Hg⁺ and C₂H₅Hg⁺. The developed extraction and IC-ICP-MS methods have been successfully used to determine Hg²⁺, CH₃Hg⁺ and C₂H₅Hg⁺ in various seaweeds, fishes and shellfishes without the matrix effect, with a method detection limit of 2.4-6.0 ng g^-1 dried weight, a recovery of 92-105%, and a relative standard deviation (RSD, n = 5) of less than or equal to 6%. The success of this study offers a reliable and universal approach for the speciation analysis of mercury in seafood, which may provide the database for objectively assessing the health risks of mercury in seafood and ensuring the safety of consumption of seafood.

Mercury in Selected Abiotic and Biotic Elements in Two Lakes in Poland: Implications for Environmental Protection and Food Safety

Mercury, which tends to bioaccumulate and biomagnify in aquatic food webs, poses a potential health risk to wildlife and to consumers of predatory fish in particular. Its concentration in biota can be high even at low environmental concentrations. Therefore, the aim of this study was to determine mercury in both abiotic (water and sediment) and biotic elements (common reed (Phragmites australis) and fish: pike (Esox lucius), bream (Abramis brama) and roach (Rutilus rutilus)) in the context of assessing the pollution of two lakes in Poland and the safety of fish consumers. The possibility of Hg biomagnification in fish was also considered. Mercury was determined by means of cold vapor atomic absorption spectrometry (CVAAS). The concentrations of Hg in water and bottom sediments of Lake Ińsko were lower than in Lake Wisola. In the bottom sediments of both lakes, a positive correlation was found between the Hg content and organic matter. The concentration of mercury in the organs of common reed did not exceed 0.017 mg/kg dry weight (dw), and its distribution can be presented as follows: root > leaves > stems > rhizomes. In fish organs from both lakes, the average mercury content did not exceed 0.086 mg/kg of wet weight (ww) and in most cases it was the highest in pike. Higher values were only observed in the muscles and skin of roach. This indicates a lack of biomagnification in the relationships between planktivorous-predatory and benthivores-predatory fish. Based on the maximum levels of mercury in fish and the calculated parameters, i.e., estimated daily intake (EDI), target hazard quotient (THQ) and tolerable weekly intake (TWI), the muscles of the examined fish were found to be safe for consumption. The average dietary exposure to total mercury (THg) and methylmercury (MeHg) was below 0.3% of the TWI.

Health risk assessment and metal contamination in fish, water and soil sediments in the East Kolkata Wetlands, India, Ramsar site

East Kolkata Wetlands (EKW) is an important site for fish culture in sewage-fed areas, which are major receivers of pollutants and wastages from Kolkata. EKW is internationally important as the Ramsar site was declared on Aug 2002 with an area of 125 km2. EKW is a natural water body where wastewater-fed natural aquaculture has been practiced for more than 70 years. It is ecologically vulnerable due to the discharge of toxic waste through sewage canals from cities. Assessing the EKW to understand the inflow and load of the toxic metal (s) in fish, water, and sediments samples is essential. The field (samples collection from 13 sites) and lab (determination of toxic level of metals) based research were carried out to assess metal toxicity and health risk assessment in EKW. The levels of eighteen metals (18), namely Chromium, Vanadium, Cobalt, Manganese, Copper, Nickel, Zinc, Silver, Molybdenum, Arsenic, Selenium, Tin, Gallium, Germanium, Strontium, Cadmium, Mercury, and Lead, were determined using Inductively coupled plasma mass spectrometry (ICP-MS) in five fish tissues viz. muscle, liver, kidney, gill and brain, along with the water samples and soil sediments in 13 sampling sites. The bioaccumulation and concentration of metals in fish tissues, soil sediments, and water samples were well within the safe level concerning the recommendation of different national and international agencies except for a few metals in a few sampling sites like Cd, As, and Pb. The geoaccumulation index (Igeo) was also determined in the soil sediments, indicating moderate arsenic, selenium, and mercury contamination in a few sites. The contamination index in water was also determined in 13 sampling sites. The estimated daily intake (EDI), reference dose (RfD), target hazard quotient (THQ), slope factor and cancer risk of Cr, Mn, Co, Ni, Cu, Zn, As, Se, Cd, Pb and Hg from fish muscle were determined. Based on the results of the present investigation, it is concluded that fish consumption in the East Kolkata Wetland (EKW) is safe. The effects of bioaccumulation of metals in muscle tissue were well within the safe level for consumption as recommended by WHO/FAO.

Specific colorimetric detection of methylmercury based on peroxidase-like activity regulation of carbon dots/Au NPs nanozyme

Methylmercury (MeHg⁺) is one of the common organic species of mercury, and has much higher toxicity than inorganic mercury. Based on the selective enhancement of the activity of nanozyme (NA-CDs/AuNPs) by MeHg⁺, a novel colorimetric nanoprobe for MeHg⁺ assay is proposed. The noradrenaline-based carbon dots (NA-CDs) as the reducing agent was applied to prepare the NA-CDs/AuNPs. The formation of gold amalgamation (Au@HgNPs) between nanozyme and MeHg⁺ allows to simultaneously accelerate the electron transfer from Au and Hg to NA-CDs and the generation of radicals (i.e. ∙OH, ∙O₂^- and ∙CH₃). The NA-CDs/AuNPs has an outstanding anti-interference performance even in the presence of different mercury. Further density functionality theory (DFT) calculations revealed that the formation of Au@HgNPs via MeHg⁺ contributes to the significantly lowered activation energy, resulting in the peroxidase-like activity generation and acceleration. This leads to rapid (10 min) and specific colorimetric detection of MeHg⁺ with the detection limit of 0.06 μg L^-1. This introduces a novel method for simple and sensitive detection of MeHg⁺, giving a new horizon for the assay of organometallic compounds.

Aptamer-based NanoBioSensors for seafood safety

Chemical and biological contaminants are of primary concern in ensuring seafood safety. Rapid detection of such contaminants is needed to keep us safe from being affected. For over three decades, immunoassay (IA) technology has been used for the detection of contaminants in seafood products. However, limitations inherent to antibody generation against small molecular targets that cannot elicit an immune response, along with the instability of antibodies under ambient conditions greatly limit their wider application for developing robust detection and monitoring tools, particularly for non-biomedical applications. As an alternative, aptamer-based biosensors (aptasensors) have emerged as a powerful yet robust analytical tool for the detection of a wide range of analytes. Due to the high specificity of aptamers in recognising targets ranging from small molecules to large proteins and even whole cells, these have been suggested to be viable molecular recognition elements (MREs) in the development of new diagnostic and biosensing tools for detecting a wide range of contaminants including heavy metals, antibiotics, pesticides, pathogens and biotoxins. In this review, we discuss the recent progress made in the field of aptasensors for detection of contaminants in seafood products with a view of effectively managing their potential human health hazards. A critical outlook is also provided to facilitate translation of aptasensors from academic laboratories to the mainstream seafood industry and consumer applications.

In silico modeling of the antagonistic effect of mercuric chloride and silver nanoparticles on the mortality rate of zebrafish (Danio rerio) based on response surface methodology

In this study, in silico modeling was designed to examine the antagonistic effect of mercuric chloride (HgCl₂) and silver nanoparticles (AgNPs) on the mortality rate of zebrafish (Danio rerio) based on response surface methodology (RSM). Adult zebrafish (Danio rerio) with an average weight of 0.75 ± 0.16 g were used in this study. An interaction between HgCl₂ and AgNPs was evaluated using DLS, TEM, and EDX mapping. In addition, RSM was applied to determine and predict the mortality rate of zebrafish induced by HgCl₂ in the presence of non-lethal concentrations of AgNPs and to optimize dependent and independent variables. Following exposure to HgCl₂, in vitro observations showed an increase in the hydrodynamic size of AgNPs and the formation of irregular nanoparticles. EDX mapping analysis also demonstrated the deposition of Hg ions on the surface of AgNPs, indicating the interaction between HgCl₂ and AgNPs (i.e., the amalgamation of Hg and AgNPs). Moreover, in silico and in vivo findings illustrated that the mortality rate of zebrafish increased significantly in a concentration-dependent manner; however, the mortality rate reduced greatly in the presence of AgNPs during 96-h exposure. Statistically significant correlation and regression were also observed for the mortality rate between the actual and predicted values based on the ANOVA results, showing that the proposed model fits well. The most critical conditions of mortality rate were occurred by HgCl₂ concentration of 0.23 mg L^-1 and AgNP concentration of 0.04 mg L^-1 that yielding maximum fish mortality rate of 96.541%. Additionally, the obtained value for model desirability was equal to 1.000 (i.e., the highest possible value). In conclusion, this statistical model could accurately describe the relationship between independent and dependent variables, and consequently boost substantially the experimental design of ecotoxicological studies by reducing the number of model organisms, toxic and chemical substances, time, and budget.

Recent Trends and Future Perspectives of Emergent Analytical Techniques for Mercury Sensing in Aquatic Environments

Environmental emissions of mercury from industrial waste and natural sources, even in trace amounts, are toxic to organisms and ecosystems. However, industrial-scale mercury detection is limited by the high cost, low sensitivity/specificity, and poor selectivity of the available analytical tools. This review summarizes the key sensors for mercury detection in aqueous environments: colorimetric-, electrochemical-, fluorescence-, and surface-enhanced Raman spectroscopy-based sensors reported between 2014-2021. It then compares the performances of these sensors in the determination of inorganic mercury (Hg²⁺ ) and methyl mercury (CH₃ Hg⁺ ) species in aqueous samples. Mercury sensors for aquatic applications still face serious challenges in terms of difficult deployment in remote areas and low robustness, reliability, and selectivity in harsh environments. We provide future perspectives on the selective detection of organomercury species, which are especially toxic and reactive in aquatic environments. This review is intended as a valuable resource for scientists in the field of mercury sensing.

Highly Sensitive Colorimetric Naked-Eye Detection of HgII Using a Sacrificial Metal-Organic Framework

This study has developed a specific, easy, and novel approach to designing a sacrificial metal-organic framework (MOF) that can detect and measure the amount of Hg²⁺ in aqueous and nonaqueous solutions using the naked eye. The functionalized [Zn(oba)(RL3)_0.5]_n·1.5DMF (TMU-59) provides the ability of simple visual assessment or colorimetric readout without sophisticated analytical equipment. Because of the special interaction with Hg²⁺, degradation of the structure of this unique MOF causes the solution to change color from colorless to a pink that is easily recognizable to the naked eye. The presence of a methyl group plays a major role in naked-eye detection by a qualitative sensor. Furthermore, this qualitative sensor data for the production of a simple, instant, and portable red, green, and blue (RGB)-based quantitative sensor were used to determine the concentration of Hg²⁺ in different specimens. As a turn-off fluorescence sensor, this unique structure is also capable of detecting Hg²⁺ at very low concentrations (the limit of detection is 0.16 ppb). To the best of our knowledge, TMU-59 is the first MOF-based naked-eye sensor that can successfully and specifically display the presence of Hg²⁺ through a major color change.

Unusual Reactivity of Graphene Quantum Dot-Wrapped Silver Nanoparticles with Hg(II): Spontaneous Growth of Hg Flowers and Their Electrocatalytic Activity

The galvanic reaction (GR) between a graphene quantum dot (GQD)-stabilized AgNP (Ag-GQD)-modified glassy carbon (GC) surface and Hg(II) leads to complete dissolution of AgNPs within 15 min and subsequent growth of Hg(0) as a "flower" on the GQD surface. This is unusual because generally the GR of bulk Ag/AgNPs with Hg(II) leads to the formation of a Hg-Ag amalgam/core shell structure. The appearance of peaks at 99.9 and 103.9 eV in X-ray photoelectron spectroscopy confirms Hg(0) on GQDs, whereas the disappearance of a peak at 370 eV indicates complete dissolution of Ag(0). When 200 ppm Hg(II) interacts with Ag-GQDs for 10 min, coalescence of AgNPs takes place along with the formation of Hg(0) petals separately. However, Hg(0) is grown as a flower with 2 μm size, and complete dissolution of AgNPs occurs subsequently after 15 min. The reason for anti-amalgamation is the direct deposition of Hg(0) by the available oxygen functional groups, followed by its strong adsorption on the graphene surface of GQDs. The subsequent growth of Hg(0) as a flower is due to the GR between AgNPs and Hg(II). Interestingly, the Hg flower-GQD-modified GC electrode acts as a good electrocatalyst toward H₂O₂ reduction by decreasing its overpotential by 150 mV in contrast to GC/Ag-GQDs.

DNA-templated fluorescent silver nanoclusters on-off switch for specific and sensitive determination of organic mercury in seafood

Organic mercury including methyl-mercury and ethyl-mercury (CH₃Hg⁺ and C₂H₅Hg⁺) has high toxicity and bio-accumulation, and thus is easy to generate bio-amplification in food chain. Hence, the specific detection of organic mercury has great significance for objectively assessing the health risk of mercury in seafood. We herein designed an aptamer (A_S-T7), which consists of a silver nanoclusters (AgNCs) scaffold sequence (A_S) and a T-rich sequence (A_T7), for simultaneously synthetizing DNA-templated AgNCs and recognizing organic mercury, and further developed a label-free fluorescent method for the sensitive and specific determination of organic mercury (CH₃Hg⁺ and C₂H₅Hg⁺ total concentration) by using DNA-templated AgNCs as signal. Without organic mercury, Ag⁺ in the mixture of aptamer and Ag⁺ was bond on A_S of aptamer to form A_S-templated AgNCs after reduction, and thus emitted strong fluorescence. Whereas, in the presence of organic mercury, CH₃Hg⁺/C₂H₅Hg⁺ was bond on A_T7 of aptamer to generate photoinduced electron transfer (PET) between CH₃Hg⁺/C₂H₅Hg⁺ and A_S-templated AgNCs, and thus results in fluorescence quenching of A_S-templated AgNCs. The fluorescent method could be used to rapidly detect organic mercury with a detection limit of 5.0 nM (i.e. 1.01 ng Hg/g), which meets the U.S. EPA standard of 0.3 mg/kg (wet). The method was successfully used to detect organic mercury in water and fish muscle with a recovery of 96%-104% and an inter-days RSD (n = 5) < 7%. The success of the study promised a reliable method for rapid and specific detection of organic mercury in environmental and biological samples.

Ionophore-Based Ion-Selective Nanospheres Based on Monomer-Dimer Conversion in the Near-Infrared Region

Here, we report ion-selective nanospheres with readout in the near-infrared (NIR) region in both fluorescence and absorbance modes. The nanospheres rely on an ionophore-mediated monomer-dimer conversion of an NIR transducer, DTTC. The DTTC monomer in the nanospheres emits fluorescence around 820 nm, while the dimer in the aqueous environment generates strong blue-shifted emission around 660 nm. With a lead ionophore, an unprecedented lower detection limit of 3 pM for Pb²⁺ was achieved, allowing us to determine Pb²⁺ levels in river water without diluting the sample. Also, the Cu²⁺-selective nanospheres showed a detection limit of 5 nM. Taking advantage of the biologically desired NIR window, blood potassium concentrations were also determined without a complicated sample pretreatment. The sensing process was explained with a theoretical model. The detection range was found finely adjustable by the amount of nanospheres used. Therefore, the nanospheres formed a highly selective, sensitive, versatile, and rapid analytical platform for metal-ion sensing.

DNA-Gold Nanozyme-Modified Paper Device for Enhanced Colorimetric Detection of Mercury Ions

In this work, a paper device consisted of a patterned paper chip, wicking pads, and a base was fabricated. On the paper chip, DNA–gold nanoparticles (DNA–AuNPs) were deposited and Hg²⁺ ions could be adsorbed by the DNA–AuNPs. The formed DNA–AuNP/Hg²⁺ nanozyme could catalyze the tetramethylbenzidine (TMB)–H₂O₂ chromogenic reaction. Due to the wicking pads, a larger volume of Hg²⁺ sample could be applied to the paper device for Hg²⁺ detection and therefore the color response could be enhanced. The paper device achieved a cut-off value of 50 nM by the naked eye for Hg²⁺ under optimized conditions. Moreover, quantitative measurements could be implemented by using a desktop scanner and extracting grayscale values. A linear range of 50–2000 nM Hg²⁺ was obtained with a detection limit of 10 nM. In addition, the paper device could be applied in the detection of environmental water samples with high recoveries ranging from 85.7% to 105.6%. The paper-device-based colorimetric detection was low-cost, simple, and demonstrated high potential in real-sample applications.

Interfacing DNA with Gold Nanoparticles for Heavy Metal Detection

The contamination of heavy metals (e.g., Hg, Pb, Cd and As) poses great risks to the environment and human health. Rapid and simple detection of heavy metals of considerable toxicity in low concentration levels is an important task in biological and environmental analysis. Among the many convenient detection methods for heavy metals, DNA-inspired gold nanoparticles (DNA-AuNPs) have become a well-established approach, in which assembly/disassembly of AuNPs is used for colorimetric signaling of the recognition event between DNA and target heavy metals at the AuNP interface. This review focuses on the recent efforts of employing DNA to manipulate the interfacial properties of AuNPs, as well as the major advances in the colorimetric detection of heavy metals. Beginning with the introduction of the fundamental aspects of DNA and AuNPs, three main strategies of constructing DNA-AuNPs with DNA binding-responsive interface are discussed, namely, crosslinking, electrostatic interaction and base pair stacking. Then, recent achievements in colorimetric biosensing of heavy metals based on manipulation of the interface of DNA-AuNPs are surveyed and compared. Finally, perspectives on challenges and opportunities for future research in this field are provided.

Colorimetric detection of Hg2+ with an azulene-containing chemodosimeter via dithioacetal hydrolysis

Azulene is a bicyclic aromatic chromophore that absorbs in the visible region. Its absorption maximum undergoes a hypsochromic shift if a conjugated electron-withdrawing group is introduced at the C1 position. This fact can be exploited in the design of a colorimetric chemodosimeter that functions by the transformation of a dithioacetal to the corresponding aldehyde upon exposure to Hg2+ ions. This chemodosimeter exhibits good chemoselectivity over other metal cations, and responds with an unambiguous colour change clearly visible to the naked eye. Its synthesis is concise and its ease of use makes it appropriate in resource-constrained environments, for example in determing mercury content of drinking water sources in the developing world.

Heavy Metals and PAHs in Meat, Milk, and Seafood From Augusta Area (Southern Italy): Contamination Levels, Dietary Intake, and Human Exposure Assessment

Heavy metals and PAHs were measured in animal foodstuffs from Augusta-Melilli-Priolo area in order to evaluate the potential human health risk associated to their consumption. All heavy metals were detected in seafood products while most of them were 1 for baby, children and teenagers, indicating a non-carcinogenic risk for these age categories by seafood ingestion. The CRAs overcame 1*10-5 for almost age categories (except "baby") and for elderly, by seafood and beef ingestions respectively. Moreover, the MOE for PAHs showed a certain cancer risk for "baby" related to cow milk ingestion.

Fluorescent Detection of Methyl Mercury in Aqueous Solution and Live Cells Using Fluorescent Probe and Micelle Systems

It is highly challenging to develop fast and sensitive fluorescent methods for monitoring organic mercury in purely aqueous solutions as well as live cells. Especially, selective fluorescent detection of methylmercury over inorganic mercury ions has not been reported. We developed a fast and sensitive fluorescent detection method for Hg²⁺ ions as well as methylmercury using an amino acid-based fluorescent probe (1) and SDS micelles. The fluorescent probe in SDS micelles detected sensitively and selectively Hg²⁺ ions and methylmercury among 16 metal ions in purely aqueous solution by the enhancement of the red emission at 575 nm, and the detection of methylmercury was completed within 1 min. The probe in SDS micelles with EDTA showed highly sensitive and selective turn on detection for methylmercury over Hg²⁺. The limit of detection was 9.1 nM for Hg²⁺ (1.8 ppb, R² = 0.989) and 206 nM for CH₃Hg⁺ (R² = 0.997). 1 rapidly penetrated live cells and detected intracellular Hg²⁺ ions as well as CH₃Hg⁺ by the enhancement of both red emissions and green emissions. Subsequent treatment of EDTA into the cell confirmed the selective detection of methylmercury in the cells. The present work indicated that the fluorescent probe with micelle systems provided a fast, sensitive, and selective detection method for monitoring inorganic mercury as well as methyl mercury.

Recent Advances in Nanomaterials for Analysis of Trace Heavy Metals

In an effort to achieve high sensitivity analysis methods for ultra-trace levels of heavy metals, numerous new nanomaterials are explored for the application in preconcentration processes and sensing systems. Nanomaterial-based methods have proven to be effective for selective analysis and speciation of heavy metals in combination with spectrometric techniques. This review outlined the different types of nanomaterials applied in the field of heavy metal analysis, and concentrated on the latest developments in various new materials. In particular, the functionalization of traditional materials and the exploitation of bio-functional materials could increase the specificity to target metals. The hybridization of multiple materials could improve material properties, to build novel sensor system or achieve detection-removal integration. Finally, we discussed the future perspectives of nanomaterials in the heavy metal preconcentration and sensor design, as well as their respective advantages and challenges. Despite impressive progress and widespread attention, the development of new nanomaterials and nanotechnology is still hampered by numerous challenges, particularly in the specificity to the target and the anti-interference performance in complex matrices.

Multicolor Aptasensor Based on DNA-Induced Au-Ag Nanorods for Simultaneous and Visual Detection of Inorganic and Organic Mercury

Compared to inorganic mercury (Hg²⁺), methyl-mercury (CH₃Hg⁺) and ethyl-mercury (C₂H₅Hg⁺) (organic mercury) not only have a much stronger toxicity but also are more easily accumulated by marine organisms to produce bioamplification. Therefore, the simultaneously onsite detection of Hg²⁺ and organic mercury is of great significance to ensure the safety of seafood, and it is also a hard challenge. We designed a T-rich aptamer, H_T7, for specifically recognizing Hg²⁺ and organic mercury and developed a multicolor aptasensor for simultaneous discrimination and detection of Hg²⁺ and organic mercury with only bare-eye observation using H_T7 as a recognition probe and gold nanorods (AuNRs) as a signal. In the presence of Hg²⁺ and Ag⁺, Hg²⁺ preferentially and specifically bind with H_T7 immobilized on AuNRs surface and induce the formation of a monolayer Ag/Hg amalgam on the AuNRs surface after reduction, resulting in a change in color from orange to faint purple and a corresponding shift in the absorption peak from 820 to 730 nm in the solution. However, in the presence of CH₃Hg⁺ or C₂H₅Hg⁺ and Ag⁺, CH₃Hg⁺ or C₂H₅Hg⁺ preferentially bind with H_T7 immobilized on the AuNRs surface and induce the formation of a monolayer Ag⁰ on the AuNRs surface after reduction, which results in the change in color from orange to atrovirens and the corresponding shift in the absorption peak shift from 820 to 670 nm in the solution. Thus, the inorganic and organic mercury (total of CH₃Hg⁺ and C₂H₅Hg⁺) can be specifically discriminated and detected by only bare-eye observation. The method can be used to simultaneously detect inorganic and organic mercury in seawater by the bare-eye observation with a visual detection limit of 2.0 ppm for Hg²⁺ and 10.0 ppm for organic mercury. The success of this study is a useful enlightenment to develop an instrument-free method for an onsite detection of trace inorganic and organic mercury in environment by a bare-eye observation, although the sensitivity of the method is relatively low.

Water soluble cadmium selenide quantum dots for ultrasensitive detection of organic, inorganic and elemental mercury in biological fluids and live cells

CdSe QDs fluorescence is highly selective and sensitive to mercury.

Synthetic coal fly ash-derived zeolites doped with silver nanoparticles for mercury (II) removal from water

Coal fly ash-derived zeolites have attracted considerable interest in the last decade due to their use in several environmental applications such as the removal of dyes and heavy metals from aqueous solutions. In this work, coal fly ash-derived zeolites and silver nanoparticles-impregnated zeolites (nanocomposites) were synthesized and characterized by TEM/EDX, SEM/EDX, XRD, XRF, porosimetry (BET), particle size analysis (PSA) and zeta potential measurements. The synthesized materials were used for the removal of Hg²⁺ from aqueous solutions. The results demonstrated that nanocomposites can remove 99% of Hg²⁺, up to 10% and 90% higher than the removal achieved by the zeolite and the parent fly ash, respectively. Leaching studies further demonstrated the superiority of the nanocomposite over the parent materials. The Hg²⁺ removal mechanism is complex, involving adsorption, surface precipitation and amalgamation.

Highly Sensitive and Selective Colorimetric Detection of Methylmercury Based on DNA Functionalized Gold Nanoparticles

A new colorimetric detection of methylmercury (CH₃Hg⁺) was developed, which was based on the surface deposition of Hg enhancing the catalytic activity of gold nanoparticles (AuNPs). The AuNPs were functionalized with a specific DNA strand (H_T7) recognizing CH₃Hg⁺, which was used to capture and separate CH₃Hg⁺ by centrifugation. It was found that the CH₃Hg⁺ reduction resulted in the deposition of Hg onto the surface of AuNPs. As a result, the catalytic activity of the AuNPs toward the chromogenic reaction of 3,3,5,5-tetramethylbenzidine (TMB)-H₂O₂ was remarkably enhanced. Under optimal conditions, a limit of detection of 5.0 nM was obtained for CH₃Hg⁺ with a linear range of 10–200 nM. We demonstrated that the colorimetric method was fairly simple with a low cost and can be conveniently applied to CH₃Hg⁺ detection in environmental samples.

Rox-DNA Functionalized Silicon Nanodots for Ratiometric Detection of Mercury Ions in Live Cells

A ratiometric fluorescent sensor for mercury ions (Hg²⁺) has been constructed via covalent functionalization of silicon nanodot (SiND) with Hg²⁺-specific 6-carboxy-X-rhodamine (Rox)-tagged DNA. For the Rox-DNA functionalized SiND, the red fluorescence of Rox can be quenched by the blue-emitting SiND in the presence of Hg²⁺ due to structural change in DNA, which serves as the response signal. Meawhile, the fluorescence of SiND is insensitive to Hg²⁺ and acts as the reference signal. The wavelength difference in the optimal emission peak is as large as 190 nm between SiND (422 nm) and Rox (612 nm), which can efficaciously exclude the interference of the two emission peaks, and facilitates dual-color visualization of Hg²⁺ ions. The biofunctionalization of SiND improves the acid-base stability of SiND significantly, which is favorable for its application in the intracellular environment. Accordingly, a sensitive, simple, precise and rapid method for tracing Hg²⁺ was proposed. The limit of detection and precision of this method for Hg²⁺ was 9.2 nM and 8.8% (50 nM, n = 7), respectively. The increase of Hg²⁺ concentration in the range of 10-1500 nM was in accordance with linearly increase of the I₄₂₂/ I₆₁₂ ratio. As for practical application, the recoveries in spiked human urine and serum samples were in the range of 81-107%. Moreover, this fluorescent nanosensor was utilized to the ratiometric detection of Hg²⁺ in HeLa cells.

Specifically and Visually Detect Methyl-Mercury and Ethyl-Mercury in Fish Sample Based on DNA-Templated Alloy Ag-Au Nanoparticles

Methyl-mercury (CH₃Hg⁺) and ethyl-mercury (C₂H₅Hg⁺) have much higher toxicity than Hg²⁺ and can be more easily accumulated by organisms to form severe bioamplification. Hence, the specific and on-site detection of CH₃Hg⁺ and C₂H₅Hg⁺ in seafood is of great significance and a hard challenge. We herein designed two T-rich aptamers (H_T5 and H_T7) for specifically recognizing CH₃Hg⁺ and the total of CH₃Hg⁺ and C₂H₅Hg⁺, respectively. In the presence of all Au³⁺, Ag⁺, and T-rich aptamer, CH₃Hg⁺ and C₂H₅Hg⁺ specifically and preferentially bind with aptamer and thus induced the formation of alloy Ag-Au nanoparticles after reduction, which led to the color change in solution. This provided a sensing platform for the instrument-free visual discrimination and detection of CH₃Hg⁺ and C₂H₅Hg⁺. By using H_T5 as probe, the method can be used to detect as low as 5.0 μM (equivalent to 1.0 μg Hg/g) of CH₃Hg⁺ by bare eye observation and 0.5 μM (equivalent to 100 ng Hg/g) of CH₃Hg⁺ by UV-visible spectrometry. By using H_T7 as probe, the method can be used to detect the total concentration of CH₃Hg⁺ and C₂H₅Hg⁺ with a visual detection limit of 5.0 μM (equivalent to 1.0 μg Hg/g) and a UV-visible spectrometry detection limit of 0.6 μM (equivalent to 120 ng Hg/g). The proposed method has been successfully used to detect CH₃Hg⁺ and C₂H₅Hg⁺ in fish muscle samples with a recovery of 101-109% and a RSD ( n = 6) < 8%. The success of this study provided a potential method for the specific and on-site detection of CH₃Hg⁺ and C₂H₅Hg⁺ in seafood by only bare eye observation.

A Co(ii) complex of a vitamer of vitamin B6acts as a sensor for Hg2+and pH in aqueous media

A new Co(ii) complex was prepared by template reaction, acting as a dual fluorescent sensor for Hg²⁺ions and pH in aqueous solution.

Etching of unmodified Au@Ag nanorods: a tunable colorimetric visualization for the rapid and high selective detection of Hg2+

A simple and cost-effective colorimetric approach based on unmodified Au@Ag nanorods (Au@Ag NRs) was developed for Hg²⁺ detection.