Electrochemiluminescence immunosensor based on CdSe nanocomposites

Luminophore-Surface-Engineering-Enabled Low-Triggering-Potential and Coreactant-Free Electrochemiluminescence for Protein Determination

Coreactant-free electrochemiluminescence (ECL) is promising for removing the exogenous effects of coreactant and simplify the operation procedures and setups of commercialized ECL bioassays. Herein, an electrosterically involved strategy for achieving a low-triggering-potential (+0.21 V vs Ag/AgCl) and coreactant-free ECL from dual-stabilizer-capped CdTe nanocrystals (NCs) is proposed with mercaptopropionic acid (MPA) and hexametaphosphate (HMP) as the capping agents of luminophores. Upon employing the CdTe NCs as the ECL tag for the immunoassay, all the tags in the bioconjugates of the CdTe NCs and the secondary antibody (Ab₂|CdTe) as well as in the final achieved sandwich-type immunocomplexes can exhibit efficient coreactant-free ECL with an electrosterically involved triggering potential nature. The bioconjugates of Ab₂|CdTe with Ab₂ no more than 30 kDa, such as the thyroid stimulating hormone (30 kDa) and the recombinant pro-gastrin releasing peptide (ProGRP, 14 kDa), merely exhibit coreactant-free ECL around +0.24 V, while bioconjugates of Ab₂|CdTe with an Ab₂ beyond 30 kDa only give off coreactant-free ECL around +0.82 V. Due to the further enhanced electrosteric effect in sandwich-type immunocomplexes, only the ECL immunosensor with ProGRP as the target can give off coreactant-free ECL around +0.24 V. The electrosterically involved and coreactant-free ECL of CdTe NCs is consequently utilized to sensitively and selectively determine the molecular protein ProGRP, which demonstrates a wide linearity range from 0.1 to 2000 pg/mL and a low limit of detection at 0.05 pg/mL (S/N = 3). This low-triggering-potential and coreactant-free combined ECL platform indicates that engineering the surface of CdTe NCs with a protein can improve the performance of ECL tags in a protein-weight-involved electrosterical way.

Advancement in COVID-19 detection using nanomaterial-based biosensors

Coronavirus disease 2019 (COVID-19) pandemic has exemplified how viral growth and transmission are a significant threat to global biosecurity. The early detection and treatment of viral infections is the top priority to prevent fresh waves and control the pandemic. Severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) has been identified through several conventional molecular methodologies that are time-consuming and require high-skill labor, apparatus, and biochemical reagents but have a low detection accuracy. These bottlenecks hamper conventional methods from resolving the COVID-19 emergency. However, interdisciplinary advances in nanomaterials and biotechnology, such as nanomaterials-based biosensors, have opened new avenues for rapid and ultrasensitive detection of pathogens in the field of healthcare. Many updated nanomaterials-based biosensors, namely electrochemical, field-effect transistor, plasmonic, and colorimetric biosensors, employ nucleic acid and antigen-antibody interactions for SARS-CoV-2 detection in a highly efficient, reliable, sensitive, and rapid manner. This systematic review summarizes the mechanisms and characteristics of nanomaterials-based biosensors for SARS-CoV-2 detection. Moreover, continuing challenges and emerging trends in biosensor development are also discussed.

TiO2 nanoparticles modified graphitic carbon nitride with potential-resolved multicolor electrochemiluminescence and application for sensitive sensing of rutin

Recently, nanocomposites with potential-resolved multicolor electrochemiluminescence (ECL) property have attracted new research interests. Herein, TiO₂ nanoparticles modified graphitic carbon nitride (TiO₂-NPs/g-C₃N₄) with inherent potential-resolved multicolor ECL emission was prepared via a simple synthesis method. The morphology and chemical composition of the synthesized TiO₂-NPs/g-C₃N₄ were characterized. The obtained TiO₂-NPs/g-C₃N₄ exhibited dual-peak multicolor ECL emission under cyclic voltammetry scanning by using K₂S₂O₈ as co-reagent. The first ECL peak (ECL-1) is composed of turquoise blue ECL emission (471 nm) located at -1.3 V and olive green ECL emission (490 nm) ranging from -1.4 to -2.0 V. The second ECL peak (ECL-2) is composed of navy blue ECL emission (458 nm) located at -3.0 V. The ECL mechanism for the potential-resolved multicolor ECL emission was proposed. Furthermore, the first ECL imaging sensing method was fabricated for the sensitive quantitative detection of rutin based on the effective quenching effect of rutin on the ECL of TiO₂-NPs/g-C₃N₄. The linear response range is 0.005-400 µM with detection limit as low as 2 nM. This work presents a simple way to prepare g-C₃N₄-based nanocomposites with potential-resolved multicolor ECL, which broadens the potential applications of g-C₃N₄-based nanocomposites for ECL imaging sensing and light-emitting devices.

Nanotechnology strategies for hepatocellular carcinoma diagnosis and treatment

Hepatocellular carcinoma (HCC) is a common malignancy threatening human health, and existing diagnostic and therapeutic techniques are facing great challenges. In the last decade or so, nanotechnology has been developed and improved for tumor diagnosis and treatment. For example, nano-intravenous injections have been approved for malignant perivascular epithelioid cell tumors. This article provides a comprehensive review of the applications of nanotechnology in HCC in recent years: (I) in radiological imaging, magnetic resonance imaging (MRI), fluorescence imaging (FMI) and multimodality imaging. (II) For diagnostic applications in HCC serum markers. (III) As embolic agents in transarterial chemoembolization (TACE) or directly as therapeutic drugs. (IV) For application in photothermal therapy and photodynamic therapy. (V) As carriers of chemotherapeutic drugs, targeted drugs, and natural plant drugs. (VI) For application in gene and immunotherapy. Compared with the traditional methods for diagnosis and treatment of HCC, nanoparticles have high sensitivity, reduce drug toxicity and have a long duration of action, and can also be combined with photothermal and photodynamic multimodal combination therapy. These summaries provide insights for the further development of nanotechnology applications in HCC.

High-Efficiency CdSe Quantum Dots/Fe3O4@MoS2/S2O82- Electrochemiluminescence System Based on a Microfluidic Analysis Platform for the Sensitive Detection of Neuron-Specific Enolase

In this work, based on electrochemiluminescence (ECL) technology and self-assembled portable disease detection chips, a bioactivity-maintained sensing platform was developed for the quantitative detection of neuron-specific enolase. First, we prepared Fe₃O₄@MoS₂ nanocomposites as an efficient catalyst to accelerate the reduction of persulfate (S₂O₈^2-). Specifically, abundant sulfate radicals (SO₄^•-) were generated because of cyclic conversion between Fe²⁺ and Fe³⁺. Meanwhile, MoS₂ nanoflowers with a high specific surface area could not only load more Fe₃O₄ but also solve its agglomeration problem, which greatly improved the catalytic efficiency. Moreover, a biosensor chip was constructed by standard lithography processes for disease detection, which had good sensitivity and portability. According to the above strategies, the developed portable sensing platform played the part of promoting the practical application of bioanalysis in early tumor screening and clinical diagnosis. In addition, we developed a short peptide ligand (NARKFYKG, NAR) to avoid the occupation of antigen binding sites by specifically connecting to Fc fragments in antibodies. Thus, the binding efficiency of antibodies and the activity of biosensors were improved due to the introduction of NAR.

Gold nanoparticle-based signal amplified electrochemiluminescence for biosensing applications

Since the content levels of biomarkers at the early stage of many diseases are generally lower than the detection threshold concentration, achieving ultrasensitive and accurate detection of these biomarkers is still one of the major goals in bio-analysis. To achieve ultrasensitive and reliable bioassay, it requires developing highly sensitive biosensors. Among all kinds of biosensors, electrogenerated chemiluminescence (ECL) based biosensors have attracted enormous attention due to their excellent properties. In order to improve the performance of ECL biosensors, gold nanoparticles (Au NPs) have been widely utilized as signal amplification tags. The introduction of Au NPs could dramatically enhance the performance of the constructed ECL biosensors via diverse ways such as electrode modification material, efficient energy acceptor in ECL resonant energy transfer (ECL-RET), reaction catalyst, surface plasmon resonance (SPR) enhancer, and as nanocarrier. Herein, we summarize recent developments and progress of ECL biosensors based on Au NPs signal amplification strategies. We will cover ECL applications of Au NPs as a signal amplification tag in the detection of proteins, metal ions, nucleic acids, small molecules, living cells, exosomes, and cell imaging. Finally, brief summary and future outlooks of this field will be presented.

Electrochemiluminescence with semiconductor (nano)materials

Electrochemiluminescence (ECL) is the light production triggered by reactions at the electrode surface. Its intrinsic features based on a dual electrochemical/photophysical nature have made it an attractive and powerful method across diverse fields in applied and fundamental research. Herein, we review the combination of ECL with semiconductor (SC) materials presenting various typical dimensions and structures, which has opened new uses of ECL and offered exciting opportunities for (bio)sensing and imaging. In particular, we highlight this particularly rich domain at the interface between photoelectrochemistry, SC material chemistry and analytical chemistry. After an introduction to the ECL and SC fundamentals, we gather the recent advances with representative examples of new strategies to generate ECL in original configurations. Indeed, bulk SC can be used as electrode materials with unusual ECL properties or light-addressable systems. At the nanoscale, the SC nanocrystals or quantum dots (QDs) constitute excellent bright ECL nano-emitters with tuneable emission wavelengths and remarkable stability. Finally, the challenges and future prospects are discussed for the design of new detection strategies in (bio)analytical chemistry, light-addressable systems, imaging or infrared devices.

Dual-potential electrochemiluminescence from black phosphorus and graphitic carbon nitrides for label-free enzymatic biosensing

Simultaneous anodic and cathodic electrochemiluminescence (ECL) emissions of black phosphorus nanosheets (BPNSs) and graphitic carbon nitrides (g-C₃N₄) were reported based on the co-existence of different co-reactants. Anodic ECL was obtained at the BPNSs modified electrode with tripropylamine (TPrA) as a co-reactant, while g-C₃N₄ was selected as another emitter to obtain cathodic ECL emission with K₂S₂O₈ as co-reactant. Employing the superiority of two separate ECL systems, a facile ECL method was developed for cholesterol detection based on cholesterol oxidase (ChOx) immobilized g-C₃N_4/BPNSs modified glassy carbon electrode (g-C₃N_4/BPNSs/GCE). False positive signals can be significantly reduced based on the separation of anode and cathode ECL signals from BPNSs and g-C₃N₄, respectively. The proposed biosensor provided a quantitative readout proportional to cholesterol concentrations in the range from 0.5 μM to 0.5 mM with a detection limit of 0.14 μM (cathodic system, 3σ, n = 6) and 0.32 μM (anodic system, 3σ, n = 6). The proposed biosensor demonstrated excellent analytical performance with remarkable sensitivity, manifesting its potential application in enzymatic biosensing field.

Enhanced electrochemiluminescence of CdS quantum dots capped with mercaptopropionic acid activated by EDC for Zika virus detection

Enhanced electrochemiluminescence (ECL) signals of CdS quantum dots capped with 3-mercaptopropionic acid (MPA@CdS QDs) have been observed after using N-(3-dimethylaminopropyl)-N'-ethylcarbodiimide (EDC) to activate the carboxyl groups. The generated ECL signals are strong enough that their images can be captured using a Huawei mobile phone. A possible mechanism for the generation of enhanced ECL signals has been proposed. Then, a sandwich immunosensor platform for detecting Zika virus (ZIKV) was fabricated with silica microspheres as the carrier and MPA@CdS QDs as ECL signal labels. Due to the dual signal amplification of EDC activation and microsphere enrichment, good linearity from 1.0 fg mL-1 to 1.0 ng mL-1 was exhibited by the QD-based ECL immunosensor for ZIKV detection. The detection limit was 0.3 fg mL-1.

Advances in electrochemiluminescence co-reaction accelerator and its analytical applications

Electrochemiluminescence (ECL) can be produced through two main routes: annihilation route and coreactant route. The vast majority of applications of ECL are based on coreactant ECL which can be generated in aqueous media at relatively low potentials compared with organic solvents. However, the development of more efficient ECL systems remains a compelling goal. Co-reaction accelerator (CRA) can significantly enhance the ECL signal through promoting more production of the coreactant intermediate. Compared with other ECL enhancement strategies, the CRA protocol is distinctive owing to its diverse, simple, and highly effective features. Various species such as inorganic compound, organic compound, and nanomaterials (NMs) have been developed as CRA and NM CRA has gained particular attention owing to their unique properties of excellent catalytic behavior and large surface area. By integration with the inherent advantages of ECL, bioanalysis based on CRA-enhanced ECL showed excellent performance such as ultrahigh sensitivity, wide dynamic range, low cost, simple instrumentation, and measurements in complex media. It has been extensively applied in various fields including clinical diagnosis, environmental monitoring, and food safety. Therefore, it is of great interest to present a systematic and critical review on the advances in ECL CRA. Herein, the recent progress on CRA and its applications in ECL bioanalysis are summarized by illustrating some representative work and a discussion of the future development trends of CRA ECL is offered.

A simple and convenient electrochemiluminescence immunoassay by using gold nanoparticles as both label and co-reactant

A simple and convenient electrochemiluminescence immunoassay (ECLIA) has been developed by using gold nanoparticles (AuNPs) as both label and co-reactant. In this novel ECLIA, the detection antibodies labeled with AuNPs as co-reactant reacts directly with ruthenium complex to produce electrochemiluminescence (ECL), which avoids the weakness of luminophore as a label. The feasibility of the new method was investigated through the sandwich ECL immunosensor for the determination of human immunoglobulin (HIgG), and excitation of luminescence was respectively driven by linear sweep voltammetry and step potential. Under the optimal conditions, ECL intensity of the immunosensor increased with HIgG concentration in a wide range from 0.01 to 10.0 ng/mL and displayed linear response to logarithm of HIgG concentration. The results showed that the detection limit was 5 pg/mL, and the relative error was no more than 4.6% for the repeated measurements. The relative standard deviation was less than 2.9% for the determination of the standard sample, which can meet the requirement of ECLIA.

Developments in the HCV Screening Technologies Based on the Detection of Antigens and Antibodies

Hepatitis C virus (HCV) accounts for 15%-20% of cases of acute infection, and chronic HCV infection is developed in about 50%-80% of HCV patients. Unfortunately, due to the lack of proper medical care, difficulty in screening for HCV infection, and lack of awareness resulted in chronic HCV infection in 71 million people on a global scale, and about 399,000 deaths in 2016. It is crucial to recognize that the effective use of antiviral medicines can cure more than 95% of HCV infected people. The Global Health Sector Strategy (GHSS) aim is to reduce the new HCV infections and the HCV associated mortality by 90% and 65%, respectively. Therefore, the methods that are simple, yet powerful enough to detect HCV infections with high sensitivity, specificity, and a shorter window period are crucial to restrain the global burden of HCV healthcare. This article focuses on the technologies used for the detection of HCV in clinical specimens.

Enhanced electrochemiluminescence from reduced graphene oxide-CdTe quantum dots for highly selective determination of copper ion

An electrochemiluminescence (ECL) sensor based on reduced graphene oxide-CdTe quantum dots (RGO-CdTe QDs) composites for detecting copper ion (Cu²⁺ ) was proposed. The ECL behaviours of the RGO-CdTe QD modified electrode were investigated with H₂ O₂ as the co-reactant. Quantitative detection of Cu²⁺ was realized as Cu²⁺ could effectively quench the ECL signal of the RGO-CdTe QDs. A wide linear range of 1.00 × 10^-14 to 1.00 × 10^-4  M (R = 0.9953) was obtained under optimized conditions, and a detection limit (S/N = 3) was achieved of as low as 3.33 × 10^-15  M. The proposed sensor also exhibited good stability and selectivity for the detection of copper ions. Finally, the analytical application of the proposed sensor was also evaluated using river water.

Optical Sensors Based on II-VI Quantum Dots

Fundamentals of quantum dots (QDs) sensing phenomena show the predominance of these fluorophores over standard organic dyes, mainly because of their unique optical properties such as sharp and tunable emission spectra, high emission quantum yield and broad absorption. Moreover, they also indicate no photo bleaching and can be also grown as no blinking emitters. Due to these properties, QDs may be used e.g., for multiplex testing of the analyte by simultaneously detecting multiple or very weak signals. Physico-chemical mechanisms used for analyte detection, like analyte stimulated QDs aggregation, nonradiative Förster resonance energy transfer (FRET) exhibit a number of QDs, which can be applied in sensors. Quantum dots-based sensors find use in the detection of ions, organic compounds (e.g., proteins, sugars, volatile substances) as well as bacteria and viruses.

Dual Enhanced Electrochemiluminescence of Aminated Au@SiO2/CdS Quantum Dot Superstructures: Electromagnetic Field Enhancement and Chemical Enhancement

This paper reports dual enhanced electrochemiluminescence (ECL) of CdS quantum dot (QD)-decorated aminated Au@SiO₂ core/shell (Au@SiO₂-NH₂/CdS) superstructures. A maximum ECL emission of the Au@SiO₂-NH₂/CdS superstructures (Au core, ca. 55 nm) with a silica shell of 38 nm was 35-fold stronger than that of the counterparts (containing neither Au cores nor amino groups) with H₂O₂ as a coreactant. The fold of ECL enhancement is the largest, and the optical path of maximum ECL enhancement is the longest reported so far. The larger the Au cores in the superstructures, the stronger the ECL emission of CdS QDs was. Two types of ECL enhancement mechanisms were clearly proposed for the dual enhanced ECL of the Au@SiO₂-NH₂/CdS superstructures. One was the electromagnetic field enhancement induced by localized surface plasmon resonance of Au cores, and the other was the chemical enhancement from amino groups modified on the silica surface involved in the ECL process in the assistance of H₂O₂. It is the first time to put forward the new concept of chemical enhanced ECL that was directly related to the participation of other chemicals, which caused a decrease in the difference in the redox potential between emitters and coreactants for the increase of their redox currents. The constructed ECL platform was demonstrated to have promising applications in highly sensitive detection of glutathione (GSH), and the response mechanism of GSH was also explored.

Ratiometric Electrogenerated Chemiluminescence Cytosensor Based on Conducting Polymer Hydrogel Loaded with Internal Standard Molecules

A sensitive and reliable bimodal electrochemiluminescent (ECL) system based on CdTe quantum dots (QDs) and luminol as double luminophores is constructed. CdTe QDs tagged with the aptamer (CdTe-Apt 2) of cancer cells are used as the detection signals, while luminol molecules are used as internal standards. The electrodeposited polyaniline-based conducting polymer hydrogel (CPH) on the electrode surfaces improves the biocompatibility and conductivity of the sensing interfaces effectively. Furthermore, electron transfer is probably much easier when luminol and coreactant potassium persulfate (K₂S₂O₈) are immobilized in the CPH in comparison to that in solution. Cancer cells are captured to the electrode surface by another aptamer linked to the Au nanoparticles immobilized in the CPH through Au-S bonds. In the developed bimodal ECL system, an internal standard method is used to quantify cancer cells by comparing the differences in sensitivity of the double-peak ECL signals with that of target analytes. The internal standard method of ECL strategy can provide very accurate detection results in a complex environment because interferences in the system can be eliminated through the self-calibration of two emission spectra. A linear relation is found on the basis of a plot of the ΔECL_CdTe/ΔECL_luminol against the concentration of cancer cells within 100-6500 cells mL^-1 under optimized conditions. The developed ratiometric ECL cytosensor with internal standard can significantly improve the accuracy and reliability of cell assays in complex biological media, demonstrating promising applications in healthcare monitoring and clinical diagnostics.

Quantum dots: from fluorescence to chemiluminescence, bioluminescence, electrochemiluminescence, and electrochemistry

During the past decade, nanotechnology has become one of the major forces driving basic and applied research. As a novel class of inorganic fluorochromes, research into quantum dots (QDs) has become one of the fastest growing fields of nanotechnology today. QDs are made of a semiconductor material with tunable physical dimensions as well as unique optoelectronic properties, and have attracted multidisciplinary research efforts to further their potential bioanalytical applications. Recently, numerous optical properties of QDs, such as narrow emission band peaks, broad absorption spectra, intense signals, and remarkable resistance to photobleaching, have made them biocompatible and sensitive for biological assays. In this review, we give an overview of these exciting materials and describe their potential, especially in biomolecules analysis, including fluorescence detection, chemiluminescence detection, bioluminescence detection, electrochemiluminescence detection, and electrochemical detection. Finally, conclusions are made, including highlighting some critical challenges remaining and a perspective of how this field can be expected to develop in the future.

Ferrocene-graphene sheets for high-efficiency quenching of electrochemiluminescence from Au nanoparticles functionalized cadmium sulfide flower-like three dimensional assemblies and sensitive detection of prostate specific antigen

A signal-switchable electrochemiluminescence (ECL) aptasensor was presented for sensitive prostate specific antigen (PSA) assay using ferrocene-graphene sheets (Fc-GNs) for high-efficiency quenching of ECL from Au nanoparticles functionalized cadmium sulfide flower-like three dimensional (3D) assemblies (Au-CdS flower-like 3D assemblies). Au-CdS flower-like 3D assemblies were synthesized and employed as luminophore, exhibiting strong and stable ECL intensity, and followed by assembling captured DNA (cDNA) and hybridizing it with half of base sequence of PSA aptamer on the Au-CdS flower-like 3D assemblies modified electrode. The remaining part of the non-complementary base of the aptamer could preferentially adsorb GN with the signal switched "off" state. While in the presence of the PSA, the binding of PSA with aptamer caused desorption of aptamer from the surface of Fc-GNs and was then released from electrode surface, thus allowing the ECL signal enhancement. With the transformation of luminescence signal from "off" to "on", the aptasensor displays high sensitivity for PSA detection with a linear range from 1pgmL^-1 to 25ngmL^-1 and a detection limit of 0.38pgmL^-1S/N=3). Moreover, this developed method could be successfully applied to the determination of PSA in human serum samples with recoveries of 85.8-104.0%, suggesting great potential applications in biochemical analysis.

Recent progress in the preparation and application of quantum dots/graphene composite materials

Quantum dots/graphene (QDs/GR) composite materials show a distinct synergistic effect between the QDs and graphene, which has aroused vast attention toward their unique characteristics in the last few decades.

Electrochemiluminescence behavior of AgNCs and its application in immunosensors based on PANI/PPy-Ag dendrite-modified electrode

An ECL immunosensor on ITO substrate decorated with PANI/PPy-Ag dendrite based on the electrochemiluminescent behavior of AgNCs was presented.

Investigation of perfluorooctanoic acid induced DNA damage using electrogenerated chemiluminescence associated with charge transfer in DNA

An electrogenerated chemiluminescence (ECL)-DNA sensor was designed and fabricated for the investigation of DNA damage by a potential environmental pollutant, perfluorooctanoic acid (PFOA). The ECL-DNA sensor consisted of a Au electrode that had a self-assembled monolayer of 15 base-pair double-stranded (ds) DNA oligonucleotides with covalently attached semiconductor CdSe quantum dots (QDs) at the distal end of the DNA. Characterization of the ECL-DNA sensor was conducted with X-ray photoelectron spectroscopy (XPS), electrochemical impedance spectroscopy (EIS), ECL, and cyclic voltammetry before and after the exposure of the sensor to PFOA. Consistent data revealed that the dsDNA on Au was severely damaged upon the incubation of the electrode in PFOA, causing significant increase in charge (or electron) transfer (CT) resistance within DNA strands. Consequently, the cathodic coreactant ECL responses of the Au/dsDNA-QDs electrode in the presence of K2S2O8 were markedly decreased. The strong interaction between DNA and PFOA via the hydrophobic interaction, especially the formation of F···H hydrogen bonds by insertion of the difluoro-methylene group of PFOA into the DNA base pairs, was believed to be responsible for the dissociation or loosening of dsDNA structure, which inhibited the CT through DNA. A linear relationship between the ECL signal of the sensor and the logarithmical concentration of PFOA displayed a dynamic range of 1.00 × 10(-14)-1.00 × 10(-4) M, with a limit of detection of 1.00 × 10(-15) M at a signal-to-noise ratio of 3. Graphical Abstract Illustration of ECL detection of PFOA on a Au/dsDNA-QDs ECL-DNA sensor.

Turn-on near-infrared electrochemiluminescence sensing of thrombin based on resonance energy transfer between CdTe/CdS coresmall/shellthick quantum dots and gold nanorods

Here we designed a near-infrared electrochemiluminescence (NECL) aptasensor for turn-on ultrasensitive determination of thrombin. It was based on the ECL resonance energy transfer (ECL-RET) of CdTe/CdS coresmall/shellthick quantum dots (QDs) to gold nanorods (AuNRs). AuNRs which functioned as ECL acceptors were assembled onto CdTe/CdS film by DNA hybridization between aptamers and their complementary oligonucleotides. In the absence of thrombin, the NECL of QDs was quenched as a result of the ECL-RET of QDs to AuNRs. In the presence of thrombin, the NECL of the system was "turned on" because thrombin can replace the AuNRs onto the QDs film, owing to the specific aptamer-protein affinity interactions. In this way, the increment of ECL intensity and the concentration of thrombin showed a logarithmic linear correlation in the range of 100 aM to 10 fM with a detection limit of 31 aM (S/N=3). Importantly, the developed aptasensor was successfully applied to thrombin sensing in real serum samples.

Fabrication and multifunctional properties of ultrasmall water-soluble tungsten oxide quantum dots

Novel ultrasmall water-soluble tungsten oxide quantum dots with multifunctional properties have been successfully developed by a facile and green method.