Mass Spectrometric Assessment and Analytical Methods for Quantitation of the New Herbicide Aminocyclopyrachlor and Its Methyl Analogue in Soil and Water

Multi-residue analytical methods for the determination of pesticides and PPCPs in water by LC-MS/MS: a review

Residues of pesticides, pharmaceutical and personal care products (PPCPs) are contaminants of world-wide concern. Consequently, there is a growing need to develop reliable analytical methods, which enable rapid, sensitive and selective determination of these pollutants in environmental samples, at trace levels. In this paper, a review of the liquid chromatography-tandem mass spectrometry (LC-MS/MS) based methods for the determination of pesticides and PPCPs in the environment is presented. Advanced aspects of current LC-MS/MS methodology, including sample preparation and matrix effects, are discussed.

Current mass spectrometry strategies for the analysis of pesticides and their metabolites in food and water matrices

Analysis of pesticides and their metabolites in food and water matrices continues to be an active research area closely related to food safety and environmental issues. This review discusses the most widely applied mass spectrometric (MS) approaches to pesticide residues analysis over the last few years. The main techniques for sample preparation remain solvent extraction and solid-phase extraction. The QuEChERS (Quick, Easy, Cheap, Effective, Rugged, Safe) approach is being increasingly used for the development of multi-class pesticide residues methods in various sample matrices. MS detectors-triple quadrupole (QqQ), ion-trap (IT), quadrupole linear ion trap (QqLIT), time-of-flight (TOF), and quadrupole time-of-flight (QqTOF)-have been established as powerful analytical tools sharing a primary role in the detection/quantification and/or identification/confirmation of pesticides and their metabolites. Recent developments in analytical instrumentation have enabled coupling of ultra-performance liquid chromatography (UPLC) and fast gas chromatography (GC) with MS detectors, and faster analysis for a greater number of pesticides. The newly developed "ambient-ionization" MS techniques (e.g., desorption electrospray ionization, DESI, and direct analysis in real time, DART) hyphenated with high-resolution MS platforms without liquid chromatography separation, and sometimes with minimum pre-treatment, have shown potential for pesticide residue screening. The recently introduced Orbitrap mass spectrometers can provide high resolving power and mass accuracy, to tackle complex analytical problems involved in pesticide residue analysis.

Fast extraction and dilution flow injection mass spectrometry method for quantitative chemical residue screening in food

A prototype multiresidue method based on fast extraction and dilution of samples followed by flow injection mass spectrometric analysis is proposed here for high-throughput chemical screening in complex matrices. The method was tested for sulfonylurea herbicides (triflusulfuron methyl, azimsulfuron, chlorimuron ethyl, sulfometuron methyl, chlorsulfuron, and flupyrsulfuron methyl), carbamate insecticides (oxamyl and methomyl), pyrimidine carboxylic acid herbicides (aminocyclopyrachlor and aminocyclopyrachlor methyl), and anthranilic diamide insecticides (chlorantraniliprole and cyantraniliprole). Lemon and pecan were used as representative high-water and low-water content matrices, respectively, and a sample extraction procedure was designed for each commodity type. Matrix-matched external standards were used for calibration, yielding linear responses with correlation coefficients (r) consistently >0.99. The limits of detection (LOD) were estimated to be between 0.01 and 0.03 mg/kg for all analytes, allowing execution of recovery tests with samples fortified at ≥0.05 mg/kg. Average analyte recoveries obtained during method validation for lemon and pecan ranged from 75 to 118% with standard deviations between 3 and 21%. Representative food processed fractions were also tested, that is, soybean oil and corn meal, yielding individual analyte average recoveries ranging from 62 to 114% with standard deviations between 4 and 18%. An intralaboratory blind test was also performed; the method excelled with 0 false positives and 0 false negatives in 240 residue measurements (20 samples × 12 analytes). The daily throughput of the fast extraction and dilution (FED) procedure is estimated at 72 samples/chemist, whereas the flow injection mass spectrometry (FI-MS) throughput could be as high as 4.3 sample injections/min, making very efficient use of mass spectrometers with negligible instrumental analysis time compared to the sample homogenization, preparation, and data processing steps.

QuEChERS multiresidue method validation and mass spectrometric assessment for the novel anthranilic diamide insecticides chlorantraniliprole and cyantraniliprole

The gas-phase dissociation reactions of chlorantraniliprole (Rynaxypyr) and cyantraniliprole (Cyazypyr) have been studied in triple-quadrupole, ion trap, and orbitrap mass spectrometers equipped with electrospray and desorption electrospray ion sources, revealing the formation of odd-electron fragment ions, the structures of which were elucidated. The odd-electron fragments were unusually abundant, and their formation is proposed to occur via a tricyclic intermediate. The applicability of the QuEChERS multiresidue method for the quantitation of chlorantraniliprole and cyantraniliprole was also assessed in this study. Four matrices representative of oily, watery, acidic, and dry crop groups were tested, with a targeted limit of quantitation (LOQ) of 0.01 mg/kg. Average recoveries ranged between 87 and 107%, with relative standard deviations (RSD) of ≤ 8%. Linear calibration functions with correlation coefficients r > 0.99 were obtained. The study provides an expansion of the QuEChERS method to include anthranilic diamides and a mass spectrometric assessment for these two novel agrochemical active ingredients.

Error propagation in pesticide residue measurements estimated by computational simulations and inter-laboratory sample analysis

An assessment of the error associated with conventional pesticide residue analysis has been conducted based on computer simulations and inter-laboratory residue analysis. Computational simulations were conducted based on (i) typical performance and regulatory acceptance criteria of analytical methods, and (ii) field residue distributions. In addition, field samples with incurred residues were sent to different private laboratories and the results compared. The relative difference in pesticide residues obtained when samples from the same field or produce lot are analyzed at separate laboratories was used to quantify the uncertainty associated with residue analyses performed using common analytical technology, and methods that are in compliance with current regulatory requirements. The study showed that differences of > 100% are common and should be expected when samples from the same crop are analyzed at different laboratories. The results also suggest that the error within residue measurements can be particularly detrimental when a result is reported near the maximum residue limit (MRL).