1
|
Sarvutiene J, Prentice U, Ramanavicius S, Ramanavicius A. Molecular imprinting technology for biomedical applications. Biotechnol Adv 2024; 71:108318. [PMID: 38266935 DOI: 10.1016/j.biotechadv.2024.108318] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/18/2023] [Revised: 01/14/2024] [Accepted: 01/20/2024] [Indexed: 01/26/2024]
Abstract
Molecularly imprinted polymers (MIPs), a type of biomimetic material, have attracted considerable interest owing to their cost-effectiveness, good physiochemical stability, favourable specificity and selectivity for target analytes, and widely used for various biological applications. It was demonstrated that MIPs with significant selectivity towards protein-based targets could be applied in medicine, diagnostics, proteomics, environmental analysis, sensors, various in vivo and/or in vitro applications, drug delivery systems, etc. This review provides an overview of MIPs dedicated to biomedical applications and insights into perspectives on the application of MIPs in newly emerging areas of biotechnology. Many different protocols applied for the synthesis of MIPs are overviewed in this review. The templates used for molecular imprinting vary from the minor glycosylated glycan-based structures, amino acids, and proteins to whole bacteria, which are also overviewed in this review. Economic, environmental, rapid preparation, stability, and reproducibility have been highlighted as significant advantages of MIPs. Particularly, some specialized MIPs, in addition to molecular recognition properties, can have high catalytic activity, which in some cases could be compared with other bio-catalytic systems. Therefore, such MIPs belong to the class of so-called 'artificial enzymes'. The discussion provided in this manuscript furnishes a comparative analysis of different approaches developed, underlining their relative advantages and disadvantages highlighting trends and possible future directions of MIP technology.
Collapse
Affiliation(s)
- Julija Sarvutiene
- Department of Nanotechnology, Center for Physical Sciences and Technology (FTMC), Sauletekio av. 3, Vilnius, Lithuania
| | - Urte Prentice
- Department of Nanotechnology, Center for Physical Sciences and Technology (FTMC), Sauletekio av. 3, Vilnius, Lithuania
| | - Simonas Ramanavicius
- Department of Nanotechnology, Center for Physical Sciences and Technology (FTMC), Sauletekio av. 3, Vilnius, Lithuania
| | - Arunas Ramanavicius
- Department of Nanotechnology, Center for Physical Sciences and Technology (FTMC), Sauletekio av. 3, Vilnius, Lithuania.
| |
Collapse
|
2
|
Suriyanarayanan S, Mandal S, Ramanujam K, Nicholls IA. Smart bio-nano interface derived from zein protein as receptors for biotinyl moiety. Talanta 2023; 256:124298. [PMID: 36701858 DOI: 10.1016/j.talanta.2023.124298] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/28/2022] [Revised: 01/18/2023] [Accepted: 01/19/2023] [Indexed: 01/22/2023]
Abstract
Proteinaceous, tunable nanostructures of zein (prolamine of corn) were developed as biotinyl-specific receptors using a molecular imprinting technique. Sacrificial templates, such as latex beads (LB3) and anodized alumina membrane (AAM), have been used to control nanostructural patterns in biotin-imprinted zein (BMZ). Briefly, a methanolic solution of the zein-biotin complex was drop cast upon a self-organized LB3 and AAM templates on Au/quartz surfaces. Subsequent dissolution of these sacrificial templates affords highly oriented, predetermined, and uniformly grown hyperporous (300 nm) and nanowires (150 nm) motifs of zein (BMZ-LB3 and BMZ-AAM), as shown by scanning electron microscopy (SEM). Selective extraction of biotin molecular template cast-off site-selective biotin imprints within these zein nanostructures complementary to biotinyl moieties. Alternatively, biotin-imprinted zein nanoparticles (BMZ-Np) and thin film (BMZ-MeOH) were prepared by coacervation and drop casting methods, respectively. Density functional theoretical (DFT) studies reveal strong hydrogen-bonded interaction of biotin with serine and glutamine residues of zein. Quartz crystal microbalance (QCM) studies show remarkable sensitivity of the hyperporous-BMZ-LB3 and nanowires of BMZ-AAM towards biotin derivative (biotin methyl ester) by five (24.75 ± 1.34 Hz/mM) and four (18.19 ± 0.75 Hz/mM) times, respectively, higher than the BMZ-MeOH. Enhanced permeability features of the zein nanostructures, when templated with LB3, enable the QCM detection of biotin- or its derivatives down to 12.9 ng mL-1 from dairy products (Kefir). The outcome of this study shall be a key aspect in interfacing biological materials with micro-/nano-sensors and electronic devices for detecting pertinent analytes using sustainably developed biopolymer-based nanostructures.
Collapse
Affiliation(s)
- Subramanian Suriyanarayanan
- Bioorganic & Biophysical Chemistry Laboratory, Linnaeus University Centre for Biomaterials Chemistry, Department of Chemistry & Biomedical Sciences, Linnaeus University, SE-391 82, Kalmar, Sweden.
| | - Sudip Mandal
- Department of Chemistry, School of Applied Sciences and Humanities, Vignan's Foundation for Science, Technology and Research (Deemed to Be University), Vadlamudi, Guntur, 522 213, Andhra Pradesh, India.
| | | | - Ian A Nicholls
- Bioorganic & Biophysical Chemistry Laboratory, Linnaeus University Centre for Biomaterials Chemistry, Department of Chemistry & Biomedical Sciences, Linnaeus University, SE-391 82, Kalmar, Sweden.
| |
Collapse
|
3
|
Givanoudi S, Heyndrickx M, Depuydt T, Khorshid M, Robbens J, Wagner P. A Review on Bio- and Chemosensors for the Detection of Biogenic Amines in Food Safety Applications: The Status in 2022. SENSORS (BASEL, SWITZERLAND) 2023; 23:613. [PMID: 36679407 PMCID: PMC9860941 DOI: 10.3390/s23020613] [Citation(s) in RCA: 8] [Impact Index Per Article: 8.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 11/30/2022] [Revised: 12/22/2022] [Accepted: 12/24/2022] [Indexed: 06/17/2023]
Abstract
This article provides an overview on the broad topic of biogenic amines (BAs) that are a persistent concern in the context of food quality and safety. They emerge mainly from the decomposition of amino acids in protein-rich food due to enzymes excreted by pathogenic bacteria that infect food under inappropriate storage conditions. While there are food authority regulations on the maximum allowed amounts of, e.g., histamine in fish, sensitive individuals can still suffer from medical conditions triggered by biogenic amines, and mass outbreaks of scombroid poisoning are reported regularly. We review first the classical techniques used for selective BA detection and quantification in analytical laboratories and focus then on sensor-based solutions aiming at on-site BA detection throughout the food chain. There are receptor-free chemosensors for BA detection and a vastly growing range of bio- and biomimetic sensors that employ receptors to enable selective molecular recognition. Regarding the receptors, we address enzymes, antibodies, molecularly imprinted polymers (MIPs), and aptamers as the most recent class of BA receptors. Furthermore, we address the underlying transducer technologies, including optical, electrochemical, mass-sensitive, and thermal-based sensing principles. The review concludes with an assessment on the persistent limitations of BA sensors, a technological forecast, and thoughts on short-term solutions.
Collapse
Affiliation(s)
- Stella Givanoudi
- Technology and Food Science Unit, Flanders Research Institute for Agriculture, Fisheries and Food (ILVO), Brusselsesteenweg 370, B-9090 Melle, Belgium
- Laboratory for Soft Matter and Biophysics, ZMB, Department of Physics and Astronomy, KU Leuven, Celestijnenlaan 200 D, B-3001 Leuven, Belgium
- Animal Sciences Unit, Flanders Research Institute for Agriculture, Fisheries and Food (ILVO), Marine Division—Cell Blue Biotech/Food Integrity, Jacobsenstraat 1, B-8400 Oostende, Belgium
| | - Marc Heyndrickx
- Technology and Food Science Unit, Flanders Research Institute for Agriculture, Fisheries and Food (ILVO), Brusselsesteenweg 370, B-9090 Melle, Belgium
| | - Tom Depuydt
- Laboratory for Soft Matter and Biophysics, ZMB, Department of Physics and Astronomy, KU Leuven, Celestijnenlaan 200 D, B-3001 Leuven, Belgium
| | - Mehran Khorshid
- Laboratory for Soft Matter and Biophysics, ZMB, Department of Physics and Astronomy, KU Leuven, Celestijnenlaan 200 D, B-3001 Leuven, Belgium
| | - Johan Robbens
- Animal Sciences Unit, Flanders Research Institute for Agriculture, Fisheries and Food (ILVO), Marine Division—Cell Blue Biotech/Food Integrity, Jacobsenstraat 1, B-8400 Oostende, Belgium
| | - Patrick Wagner
- Laboratory for Soft Matter and Biophysics, ZMB, Department of Physics and Astronomy, KU Leuven, Celestijnenlaan 200 D, B-3001 Leuven, Belgium
| |
Collapse
|
4
|
Suriyanarayanan S, Kandregula GR, Ramanujam K, Nicholls IA. Sustainable synthesis of hierarchically grown chloramphenicol‐imprinted poly(caffeic acid) nanostructured films. J Appl Polym Sci 2023. [DOI: 10.1002/app.53560] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/06/2023]
Affiliation(s)
- Subramanian Suriyanarayanan
- Bioorganic & Biophysical Chemistry Laboratory, Linnaeus University Centre for Biomaterials Chemistry Linnaeus University Kalmar Sweden
| | - Ganapathi Rao Kandregula
- Clean Energy Laboratory, Department of Chemistry Indian Institute of Technology Madras Chennai India
| | - Kothandaraman Ramanujam
- Clean Energy Laboratory, Department of Chemistry Indian Institute of Technology Madras Chennai India
| | - Ian A. Nicholls
- Bioorganic & Biophysical Chemistry Laboratory, Linnaeus University Centre for Biomaterials Chemistry Linnaeus University Kalmar Sweden
| |
Collapse
|
5
|
Ramanavicius S, Ramanavicius A. Development of molecularly imprinted polymer based phase boundaries for sensors design (review). Adv Colloid Interface Sci 2022; 305:102693. [PMID: 35609398 DOI: 10.1016/j.cis.2022.102693] [Citation(s) in RCA: 34] [Impact Index Per Article: 17.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/31/2021] [Revised: 04/15/2022] [Accepted: 05/04/2022] [Indexed: 12/18/2022]
Abstract
Achievements in polymer chemistry enables to design artificial phase boundaries modified by imprints of selected molecules and some larger structures. These structures seem very useful for the design of new materials suitable for affinity chromatography and sensors. In this review, we are overviewing the synthesis of molecularly imprinted polymers (MIPs) and the applicability of these MIPs in the design of affinity sensors. Such MIP-based layers or particles can be used as analyte-recognizing parts for sensors and in some cases they can replace very expensive compounds (e.g.: antibodies, receptors etc.), which are recognizing analyte. Many different polymers can be used for the formation of MIPs, but conducing polymers shows the most attractive capabilities for molecular-imprinting by various chemical compounds. Therefore, the application of conducting polymers (e.g.: polypyrrole, polyaniline, polythiophene, poly(3,4-ethylenedioxythiophene), and ortho-phenylenediamine) seems very promising. Polypyrrole is one of the most suitable for the development of MIP-based structures with molecular imprints by analytes of various molecular weights. Overoxiation of polypyrrole enables to increase the selectivity of polypyrrole-based MIPs. Methods used for the synthesis of conducting polymer based MIPs are overviewed. Some methods, which are applied for the transduction of analytical signal, are discussed, and challenges and new trends in MIP-technology are foreseen.
Collapse
|
6
|
Ramanavicius S, Samukaite-Bubniene U, Ratautaite V, Bechelany M, Ramanavicius A. Electrochemical Molecularly Imprinted Polymer Based Sensors for Pharmaceutical and Biomedical Applications (Review). J Pharm Biomed Anal 2022; 215:114739. [DOI: 10.1016/j.jpba.2022.114739] [Citation(s) in RCA: 8] [Impact Index Per Article: 4.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/15/2021] [Revised: 03/19/2022] [Accepted: 03/23/2022] [Indexed: 12/23/2022]
|
7
|
Electrochemically Deposited Molecularly Imprinted Polymer-Based Sensors. SENSORS 2022; 22:s22031282. [PMID: 35162027 PMCID: PMC8838766 DOI: 10.3390/s22031282] [Citation(s) in RCA: 23] [Impact Index Per Article: 11.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 12/02/2021] [Revised: 01/26/2022] [Accepted: 02/02/2022] [Indexed: 12/10/2022]
Abstract
This review is dedicated to the development of molecularly imprinted polymers (MIPs) and the application of MIPs in sensor design. MIP-based biological recognition parts can replace receptors or antibodies, which are rather expensive. Conducting polymers show unique properties that are applicable in sensor design. Therefore, MIP-based conducting polymers, including polypyrrole, polythiophene, poly(3,4-ethylenedioxythiophene), polyaniline and ortho-phenylenediamine are frequently applied in sensor design. Some other materials that can be molecularly imprinted are also overviewed in this review. Among many imprintable materials conducting polymer, polypyrrole is one of the most suitable for molecular imprinting of various targets ranging from small organics up to rather large proteins. Some attention in this review is dedicated to overview methods applied to design MIP-based sensing structures. Some attention is dedicated to the physicochemical methods applied for the transduction of analytical signals. Expected new trends and horizons in the application of MIP-based structures are also discussed.
Collapse
|
8
|
Anithaa AC, Mayil Vealan SB, Veerapandi G, Sekar C. Highly efficient non-enzymatic electrochemical determination of histamine based on tungsten trioxide nanoparticles for evaluation of food quality. J APPL ELECTROCHEM 2021. [DOI: 10.1007/s10800-021-01608-3] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/20/2022]
|
9
|
Ramanavicius S, Jagminas A, Ramanavicius A. Advances in Molecularly Imprinted Polymers Based Affinity Sensors (Review). Polymers (Basel) 2021; 13:974. [PMID: 33810074 PMCID: PMC8004762 DOI: 10.3390/polym13060974] [Citation(s) in RCA: 101] [Impact Index Per Article: 33.7] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/17/2021] [Revised: 03/03/2021] [Accepted: 03/16/2021] [Indexed: 12/12/2022] Open
Abstract
Recent challenges in biomedical diagnostics show that the development of rapid affinity sensors is very important issue. Therefore, in this review we are aiming to outline the most important directions of affinity sensors where polymer-based semiconducting materials are applied. Progress in formation and development of such materials is overviewed and discussed. Some applicability aspects of conducting polymers in the design of affinity sensors are presented. The main attention is focused on bioanalytical application of conducting polymers such as polypyrrole, polyaniline, polythiophene and poly(3,4-ethylenedioxythiophene) ortho-phenylenediamine. In addition, some other polymers and inorganic materials that are suitable for molecular imprinting technology are also overviewed. Polymerization techniques, which are the most suitable for the development of composite structures suitable for affinity sensors are presented. Analytical signal transduction methods applied in affinity sensors based on polymer-based semiconducting materials are discussed. In this review the most attention is focused on the development and application of molecularly imprinted polymer-based structures, which can replace antibodies, receptors, and many others expensive affinity reagents. The applicability of electrochromic polymers in affinity sensor design is envisaged. Sufficient biocompatibility of some conducting polymers enables to apply them as "stealth coatings" in the future implantable affinity-sensors. Some new perspectives and trends in analytical application of polymer-based semiconducting materials are highlighted.
Collapse
Affiliation(s)
- Simonas Ramanavicius
- Department of Electrochemical Material Science, State Research Institute Center for Physical Sciences and Technology (FTMC), Sauletekio av. 3, LT-10257 Vilnius, Lithuania; (S.R.); (A.J.)
- Department of Physical Chemistry, Faculty of Chemistry and Geosciences, Institute of Chemistry, Vilnius University, Naugarduko 24, LT-03225 Vilnius, Lithuania
| | - Arunas Jagminas
- Department of Electrochemical Material Science, State Research Institute Center for Physical Sciences and Technology (FTMC), Sauletekio av. 3, LT-10257 Vilnius, Lithuania; (S.R.); (A.J.)
| | - Arunas Ramanavicius
- Department of Physical Chemistry, Faculty of Chemistry and Geosciences, Institute of Chemistry, Vilnius University, Naugarduko 24, LT-03225 Vilnius, Lithuania
| |
Collapse
|
10
|
Vasconcelos H, Coelho LCC, Matias A, Saraiva C, Jorge PAS, de Almeida JMMM. Biosensors for Biogenic Amines: A Review. BIOSENSORS-BASEL 2021; 11:bios11030082. [PMID: 33805834 PMCID: PMC8000219 DOI: 10.3390/bios11030082] [Citation(s) in RCA: 11] [Impact Index Per Article: 3.7] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 02/21/2021] [Revised: 03/08/2021] [Accepted: 03/09/2021] [Indexed: 01/11/2023]
Abstract
Biogenic amines (BAs) are well-known biomolecules, mostly for their toxic and carcinogenic effects. Commonly, they are used as an indicator of quality preservation in food and beverages since their presence in higher concentrations is associated with poor quality. With respect to BA’s metabolic pathways, time plays a crucial factor in their formation. They are mainly formed by microbial decarboxylation of amino acids, which is closely related to food deterioration, therefore, making them unfit for human consumption. Pathogenic microorganisms grow in food without any noticeable change in odor, appearance, or taste, thus, they can reach toxic concentrations. The present review provides an overview of the most recent literature on BAs with special emphasis on food matrixes, including a description of the typical BA assay formats, along with its general structure, according to the biorecognition elements used (enzymes, nucleic acids, whole cells, and antibodies). The extensive and significant amount of research that has been done to the investigation of biorecognition elements, transducers, and their integration in biosensors, over the years has been reviewed.
Collapse
Affiliation(s)
- Helena Vasconcelos
- School of Agrarian and Veterinary Sciences, University of Trás-os-Montes and Alto Douro, 5001-801 Vila Real, Portugal; (H.V.); (C.S.)
- INESC TEC—Institute for Systems and Computer Engineering, Technology and Science and Faculty of Sciences, University of Porto, 4169-007 Porto, Portugal; (L.C.C.C.); (A.M.); (P.A.S.J.)
| | - Luís C. C. Coelho
- INESC TEC—Institute for Systems and Computer Engineering, Technology and Science and Faculty of Sciences, University of Porto, 4169-007 Porto, Portugal; (L.C.C.C.); (A.M.); (P.A.S.J.)
| | - Ana Matias
- INESC TEC—Institute for Systems and Computer Engineering, Technology and Science and Faculty of Sciences, University of Porto, 4169-007 Porto, Portugal; (L.C.C.C.); (A.M.); (P.A.S.J.)
| | - Cristina Saraiva
- School of Agrarian and Veterinary Sciences, University of Trás-os-Montes and Alto Douro, 5001-801 Vila Real, Portugal; (H.V.); (C.S.)
| | - Pedro A. S. Jorge
- INESC TEC—Institute for Systems and Computer Engineering, Technology and Science and Faculty of Sciences, University of Porto, 4169-007 Porto, Portugal; (L.C.C.C.); (A.M.); (P.A.S.J.)
- Department. of Physics and Astronomy, Faculty of Sciences, University of Porto, 4169-007 Porto, Portugal
| | - José M. M. M. de Almeida
- INESC TEC—Institute for Systems and Computer Engineering, Technology and Science and Faculty of Sciences, University of Porto, 4169-007 Porto, Portugal; (L.C.C.C.); (A.M.); (P.A.S.J.)
- Department of Physics, School of Science and Technology, University of Trás-os-Montes and Alto Douro, 5001-801 Vila Real, Portugal
- Correspondence:
| |
Collapse
|
11
|
Yang L, Zhang B, Xu B, Zhao F, Zeng B. Ionic liquid functionalized 3D graphene-carbon nanotubes‒AuPd nanoparticles‒molecularly imprinted copolymer based paracetamol electrochemical sensor: Preparation, characterization and application. Talanta 2021; 224:121845. [PMID: 33379063 DOI: 10.1016/j.talanta.2020.121845] [Citation(s) in RCA: 29] [Impact Index Per Article: 9.7] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/03/2020] [Revised: 10/24/2020] [Accepted: 10/28/2020] [Indexed: 02/04/2023]
Abstract
An innovative electrochemical sensor for paracetamol (PCM) determination was fabricated by electropolymerization imprinting on three-dimension (3D) AuPd nanoparticles‒ionic liquid (IL) functionalized graphene‒carbon nanotubes nanocomposite (AuPd/GN-CNTs-IL) modified glassy carbon electrode. The GN-CNTs supported AuPd alloy nanoparticles were prepared via one-pot hydrothermal method in the presence of IL (i.e. 1-hydroxyethyl-3-methyl imidazolium bis[(trifluoromethyl) sulfonyl] imide), which not only promoted the formation of small AuPd alloy nanoparticles, but also acted as "spacer" to prevent the π-π stacking and aggregation of graphene sheets and carbon nanotubes. The resulting composite had large surface area and high electrocatalysis. The PCM imprinted poly(carbazole-co-pyrrole) exhibited good recognition to PCM and had high stability. Based on the synergic effect of PCM imprinted copolymer and 3D AuPd/GN-CNTs-IL nanocomposite, a highly selective and sensitive electrochemical sensor was established. It presented a good linear relationship from 0.10 to 10 μM with a low limit of detection of 50 nM (S/N = 3). The sensor could be applied to the detection of PCM in biological samples, with acceptable recoveries (84.5%-102%). In addition, it was successfully used to monitor the concentration of PCM in urine from a patient with fever cold.
Collapse
Affiliation(s)
- Lite Yang
- College of Chemistry and Molecular Sciences, Wuhan University, Wuhan, 430072, Hubei Province, PR China
| | - Bihong Zhang
- College of Chemistry and Molecular Sciences, Wuhan University, Wuhan, 430072, Hubei Province, PR China
| | - Bingjie Xu
- College of Chemistry and Molecular Sciences, Wuhan University, Wuhan, 430072, Hubei Province, PR China
| | - Faqiong Zhao
- College of Chemistry and Molecular Sciences, Wuhan University, Wuhan, 430072, Hubei Province, PR China
| | - Baizhao Zeng
- College of Chemistry and Molecular Sciences, Wuhan University, Wuhan, 430072, Hubei Province, PR China.
| |
Collapse
|
12
|
Ayerdurai V, Cieplak M, Noworyta KR, Gajda M, Ziminska A, Sosnowska M, Piechowska J, Borowicz P, Lisowski W, Shao S, D'Souza F, Kutner W. Electrochemical sensor for selective tyramine determination, amplified by a molecularly imprinted polymer film. Bioelectrochemistry 2020; 138:107695. [PMID: 33296790 DOI: 10.1016/j.bioelechem.2020.107695] [Citation(s) in RCA: 8] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/17/2020] [Revised: 09/30/2020] [Accepted: 10/07/2020] [Indexed: 10/23/2022]
Abstract
A molecularly imprinted polymer (MIP) film based electrochemical sensor for selective determination of tyramine was devised, fabricated, and tested. Tyramine is generated in smoked and fermented food products. Therefore, it may serve as a marker of the rottenness of these products. Importantly, intake of large amounts of tyramine by patients treated with monoamine oxidase (MAO) inhibitors may lead to a "cheese effect", namely, a dangerous hypertensive crisis. The limit of detection at S/N = 3 of the chemosensor, in both differential pulse voltammetry (DPV) and electrochemical impedance spectroscopy (EIS) determinations, with the use of the Fe(CN)64-/Fe(CN)63- redox probe, was 159 and 168 µM tyramine, respectively. The linear dynamic concentration range was 290 µM to 2.64 mM tyramine. The chemosensor was highly selective with respect to the glucose, urea, and creatinine interferences. Its DPV determined apparent imprinting factor was 5.6. Moreover, the mechanism of the "gate effect" in the operation of the polymer film-coated electrodes was unraveled.
Collapse
Affiliation(s)
- Viknasvarri Ayerdurai
- Institute of Physical Chemistry, Polish Academy of Sciences, Kasprzaka 44/52, 01-224 Warsaw, Poland
| | - Maciej Cieplak
- Institute of Physical Chemistry, Polish Academy of Sciences, Kasprzaka 44/52, 01-224 Warsaw, Poland.
| | - Krzysztof R Noworyta
- Institute of Physical Chemistry, Polish Academy of Sciences, Kasprzaka 44/52, 01-224 Warsaw, Poland
| | - Marianna Gajda
- Institute of Physical Chemistry, Polish Academy of Sciences, Kasprzaka 44/52, 01-224 Warsaw, Poland; Faculty of Pharmacy with Laboratory Medicine Division, Medical University of Warsaw, Banacha 1, 02-091 Warsaw, Poland
| | - Agnieszka Ziminska
- Institute of Physical Chemistry, Polish Academy of Sciences, Kasprzaka 44/52, 01-224 Warsaw, Poland; Faculty of Pharmacy with Laboratory Medicine Division, Medical University of Warsaw, Banacha 1, 02-091 Warsaw, Poland
| | - Marta Sosnowska
- Institute of Physical Chemistry, Polish Academy of Sciences, Kasprzaka 44/52, 01-224 Warsaw, Poland
| | - Joanna Piechowska
- Institute of Physical Chemistry, Polish Academy of Sciences, Kasprzaka 44/52, 01-224 Warsaw, Poland
| | - Pawel Borowicz
- Institute of Physical Chemistry, Polish Academy of Sciences, Kasprzaka 44/52, 01-224 Warsaw, Poland
| | - Wojciech Lisowski
- Institute of Physical Chemistry, Polish Academy of Sciences, Kasprzaka 44/52, 01-224 Warsaw, Poland
| | - Shuai Shao
- Department of Chemistry, University of North Texas, Denton, 1155, Union Circle, #305070, TX 76203-5017, USA
| | - Francis D'Souza
- Department of Chemistry, University of North Texas, Denton, 1155, Union Circle, #305070, TX 76203-5017, USA.
| | - Wlodzimierz Kutner
- Institute of Physical Chemistry, Polish Academy of Sciences, Kasprzaka 44/52, 01-224 Warsaw, Poland; Faculty of Mathematics and Natural Sciences. School of Sciences, Cardinal Stefan Wyszynski University in Warsaw, Wóycickiego 1/3, 01-815 Warsaw, Poland.
| |
Collapse
|
13
|
Potentiometric sensing of histamine using immobilized enzymes on layered double hydroxides. Journal of Food Science and Technology 2020; 58:2936-2942. [PMID: 34294955 DOI: 10.1007/s13197-020-04795-7] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Revised: 09/08/2020] [Accepted: 09/15/2020] [Indexed: 10/23/2022]
Abstract
Diamine oxydase and peroxidase have been co-immobilized onto layered double hydroxide (LDH) thin films for the development of real-time histamine biosensors. The chosen LDH materials are Mg2AlCO3, Mg4FeCl and Ca2AlCl. Prepared bi-enzymatic hybrid nanomaterials are capable of detecting histamine through the electrochemical oxidation of H2O2 and are used as the sensitive membrane for potentiometric microelectrode. Histamine biosensors developed in this work have fast response of less than 20 s, are sensitive and selective, with a large dynamic range of 10-8-10-3 M and a limit of detection of less than 10-8 M. The detection limit of the developed bi-enzymatic biosensors is relatively higher than those corresponding with gas and liquid chromatography, which are still considered as the reference methods. Finally, the reproducibility, the specificity and the storage stability of the biosensors were studied.
Collapse
|
14
|
Zinc(II) salphen complex-based fluorescence optical sensor for biogenic amine detection. Anal Bioanal Chem 2019; 411:6449-6461. [PMID: 31392436 DOI: 10.1007/s00216-019-02025-4] [Citation(s) in RCA: 14] [Impact Index Per Article: 2.8] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/09/2019] [Revised: 06/18/2019] [Accepted: 07/08/2019] [Indexed: 01/09/2023]
Abstract
Biogenic amines have attracted interest among researchers because of their importance as biomarkers in determining the quality of food freshness in the food industry. A rapid and simple technique that is able to detect biogenic amines is needed. In this work, a new optical sensing material for one of the biogenic amines, histamine, based on a new zinc(II) salphen complex was developed. The binding of zinc(II) complexes without an electron-withdrawing group (complex 1) and with electron-withdrawing groups (F, complex 2; Cl, complex 3) to histamine resulted in enhancement of fluorescence. All complexes exhibited high affinity for histamine [binding constant of (7.14 ± 0.80) × 104, (3.33 ± 0.03) × 105, and (2.35 ± 0.14) × 105 M-1, respectively]. Complex 2 was chosen as the sensing material for further development of an optical sensor for biogenic amines in the following step since it displayed enhanced optical properties in comparison with complexes 1 and 3. The optical sensor for biogenic amines used silica microparticles as the immobilisation support and histamine as the analyte. The optical sensor had a limit of detection for histamine of 4.4 × 10-12 M, with a linear working range between 1.0 × 10-11 and 1.0 × 10-6 M (R2 = 0.9844). The sensor showed good reproducibility, with a low relative standard deviation (5.5 %). In addition, the sensor exhibited good selectivity towards histamine and cadaverine over other amines, such as 1,2-phenylenediamine, triethylamine, and trimethylamine. Recovery and real sample studies suggested that complex 2 could be a promising biogenic amine optical sensing material that can be applied in the food industry, especially in controlling the safety of food for it to remain fresh and healthy for consumption.
Collapse
|
15
|
Dorraji PS, Noori M, Fotouhi L. Voltammetric determination of adefovir dipivoxil by using a nanocomposite prepared from molecularly imprinted poly(o-phenylenediamine), multi-walled carbon nanotubes and carbon nitride. Mikrochim Acta 2019; 186:427. [PMID: 31187299 DOI: 10.1007/s00604-019-3538-y] [Citation(s) in RCA: 7] [Impact Index Per Article: 1.4] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/17/2019] [Accepted: 05/22/2019] [Indexed: 11/27/2022]
Abstract
An electrochemical sensor for adefovir dipivoxil (ADV) detection was prepared by electropolymerization of o-phenylenediamine in the presence of ADV on a glassy carbon electrode modified with multi-walled carbon nanotubes and carbon nitride. The electrode was characterized by field emission scanning electron microscopy and differential pulse voltammetry. The performance was optimized by response surface methodology. The changes in differential pulse voltammetric peak currents of the redox probe, ferricyanide, were linear to ADV concentrations in the range from 0.1 to 9.9 μmol L-1, with the detection limit of 0.05 μmol L-1 (S/N = 3). The sensor was applied to the determination of ADV in drug formulations, human serum and urine samples. It is selective due to the use of an imprinted material, well reproducible, long-term stable, and regenerable. Graphical abstract By merging the unique properties of carbon nitride with intrinsic properties of MWCNTs, and molecularly imprinted polymers, a novel electrochemical sensor with selective binding sites was prepared for determination of adefovir dipivoxil in pharmaceutical and biological samples.
Collapse
Affiliation(s)
- Parisa Seyed Dorraji
- Department of Chemistry, Faculty of Physics and Chemistry, Alzahra University, P.O. Box 1993891176, Tehran, Iran
| | - Marzieh Noori
- Department of Chemistry, Faculty of Physics and Chemistry, Alzahra University, P.O. Box 1993891176, Tehran, Iran
| | - Lida Fotouhi
- Department of Chemistry, Faculty of Physics and Chemistry, Alzahra University, P.O. Box 1993891176, Tehran, Iran.
| |
Collapse
|
16
|
Liu F, Kan X. Conductive imprinted electrochemical sensor for epinephrine sensitive detection and double recognition. J Electroanal Chem (Lausanne) 2019. [DOI: 10.1016/j.jelechem.2019.01.050] [Citation(s) in RCA: 19] [Impact Index Per Article: 3.8] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/16/2022]
|
17
|
Kaur N, Chopra S, Singh G, Raj P, Bhasin A, Sahoo SK, Kuwar A, Singh N. Chemosensors for biogenic amines and biothiols. J Mater Chem B 2018; 6:4872-4902. [PMID: 32255063 DOI: 10.1039/c8tb00732b] [Citation(s) in RCA: 72] [Impact Index Per Article: 12.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/21/2022]
Abstract
There is burgeoning interest among supramolecular chemists to develop novel molecular systems to detect biogenic amines and bio-thiols in aqueous and non-aqueous media due to their potential role in biological processes. Biogenic amines are biologically important targets because of their involvement in the energy metabolism of human biological systems and their requirement is met through food and nutrition. However, the increasing instances of serious health problems due to food toxicity have raised the quality of food nowadays. Biogenic amines have been frequently considered as the markers or primary quality parameters of foods like antioxidant properties, freshness and spoilage. For instance, these amines such as spermine, spermidine, cadavarine, etc. may originate during microbial decarboxylation of amino acids of fermented foods/beverages. These amines may also react with nitrite available in certain meat products and concomitantly produce carcinogenic nitrosamine compounds. On the other hand, it is also well established that biothiols, particularly, thiol amino acids, provide the basic characteristics to food including flavor, color and texture that determine its acceptability. For instance, the reduction of thiol groups produces hydrogen sulfide which reduces flavour as in rotten eggs and spoiled fish, and the presence of hydrogen sulfide in fish is indicative of spoilage. Thus, biogenic amines and bio-thiols have attracted the profound interest of researchers as analytical tools for their quantification. Much scientific and technological information is issued every year, where the establishment of precise interactions of biogenic amines and bio-thiols with other molecules is sought in aqueous and non-aqueous media. This review summarizes the optical chemosensors developed for the selective detection of biogenic amines and bio-thiols.
Collapse
Affiliation(s)
- Navneet Kaur
- Department of Chemistry, Panjab University (PU), Chandigarh-160014, India.
| | | | | | | | | | | | | | | |
Collapse
|
18
|
Wang DD, Gao D, Xu WJ, Li F, Yin MN, Fu QF, Xia ZN. Magnetic molecularly imprinted polymer for the selective extraction of hesperetin from the dried pericarp of Citrus reticulata Blanco. Talanta 2018; 184:307-315. [DOI: 10.1016/j.talanta.2018.03.010] [Citation(s) in RCA: 30] [Impact Index Per Article: 5.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/11/2017] [Revised: 02/27/2018] [Accepted: 03/07/2018] [Indexed: 12/21/2022]
|
19
|
Zhang J, Guo XT, Zhou JP, Liu GZ, Zhang SY. Electrochemical preparation of surface molecularly imprinted poly(3-aminophenylboronic acid)/MWCNTs nanocomposite for sensitive sensing of epinephrine. MATERIALS SCIENCE & ENGINEERING. C, MATERIALS FOR BIOLOGICAL APPLICATIONS 2018; 91:696-704. [PMID: 30033304 DOI: 10.1016/j.msec.2018.06.011] [Citation(s) in RCA: 19] [Impact Index Per Article: 3.2] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 09/03/2017] [Revised: 05/29/2018] [Accepted: 06/09/2018] [Indexed: 01/19/2023]
Abstract
A nanocomposite with multi-walled carbon nanotubes (MWCNTs) coated with surface molecularly imprinted polymers (MIPs) poly(3-aminophenylboronic acid) (PAPBA) was successfully prepared via potentiodynamic electropolymerization and tested as an effective electrochemical material for epinephrine (EP) detection. The morphology and properties of the sensing material were characterized with scanning electron microscopy and electrochemical impedance spectroscopy. Compared with MWCNTs or non-imprinted polymers PAPBA modified MWCNTs electrodes, the PAPBA(MIPs)/MWCNTs modified electrode showed a lower charge transfer resistance and enhanced electrochemical performance for EP detection. The improved performance can be attributed to the large amount of specific imprinted cavities with boric acid group which can selectively adsorb EP molecule and the synergistic effect between MWCNTs and PAPBA(MIPs). The effects of pH, the molar ratio between monomer and template molecule, the cycle number of electropolymerization, and the accumulation time of the modified electrode on the sensing performance were investigated. It was found that under the optimal conditions, the PAPBA(MIPs)/MWCNTs sensor could effectively recognize EP from many possible interferents of higher concentration within a wide linear range of 0.2-800 μmol·L-1, with low detection limit of 35 nmol·L-1, high sensitivity and good discrimination. The detection of EP in human serum and real injection samples using the PAPBA(MIPs)/MWCNTs sensor also gave satisfactory results.
Collapse
Affiliation(s)
- Juan Zhang
- School of Chemistry and Chemical Engineering, Shandong University, Jinan 250100, China; Department of Chemistry, School of Basic Medical Sciences, Ningxia Medical University, Yinchuan 750004, China
| | - Xiao-Tong Guo
- School of Chemistry and Chemical Engineering, Shandong University, Jinan 250100, China
| | - Jun-Ping Zhou
- School of Chemistry and Chemical Engineering, Shandong University, Jinan 250100, China
| | - Guang-Zhou Liu
- School of Marine Science, Shandong University, Jinan 250100, China
| | - Shu-Yong Zhang
- School of Chemistry and Chemical Engineering, Shandong University, Jinan 250100, China.
| |
Collapse
|
20
|
Mattsson L, Xu J, Preininger C, Tse Sum Bui B, Haupt K. Competitive fluorescent pseudo-immunoassay exploiting molecularly imprinted polymers for the detection of biogenic amines in fish matrix. Talanta 2018; 181:190-196. [PMID: 29426500 DOI: 10.1016/j.talanta.2018.01.010] [Citation(s) in RCA: 38] [Impact Index Per Article: 6.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/28/2017] [Revised: 12/29/2017] [Accepted: 01/02/2018] [Indexed: 10/18/2022]
Abstract
We developed a competitive fluorescent molecularly imprinted polymer (MIP) assay to detect biogenic amines in fish samples. MIPs synthesized by precipitation polymerization using histamine as template were used in a batch binding assay analogous to competitive fluoroimmunoassays. Introducing a complex sample matrix, such as fish extract, into the assay changes the environment and the binding conditions, therefore the importance of the sample preparation is extensively discussed. Several extraction and purification methods for fish were comprehensively studied, and an optimal clean-up procedure for fish samples using liquid-liquid extraction was developed. The feasibility of the competitive MIP assay was shown in the purified fish extract over a broad histamine range (1 - 430µM). The MIP had the highest affinity towards histamine, but recognized also the structurally similar biogenic amines tyramine and tryptamine, as well as spermine and spermidine, providing simultaneous analysis and assessment of the total amount of biogenic amines.
Collapse
Affiliation(s)
- Leena Mattsson
- AIT Austrian Institute of Technology, Center for Health & Bioresources, Konrad Lorenz Strasse 24, 3430 Tulln, Austria
| | - Jingjing Xu
- Sorbonne Universités, Université de Technologie de Compiègne, CNRS Enzyme and Cell Engineering Laboratory, Rue Roger Couttolenc, CS 60319, 60203 Compiègne Cedex, France
| | - Claudia Preininger
- AIT Austrian Institute of Technology, Center for Health & Bioresources, Konrad Lorenz Strasse 24, 3430 Tulln, Austria
| | - Bernadette Tse Sum Bui
- Sorbonne Universités, Université de Technologie de Compiègne, CNRS Enzyme and Cell Engineering Laboratory, Rue Roger Couttolenc, CS 60319, 60203 Compiègne Cedex, France
| | - Karsten Haupt
- Sorbonne Universités, Université de Technologie de Compiègne, CNRS Enzyme and Cell Engineering Laboratory, Rue Roger Couttolenc, CS 60319, 60203 Compiègne Cedex, France.
| |
Collapse
|
21
|
Hashemi M, Nazari Z, Noshirvani N. Synthesis of chitosan based magnetic molecularly imprinted polymers for selective separation and spectrophotometric determination of histamine in tuna fish. Carbohydr Polym 2017; 177:306-314. [DOI: 10.1016/j.carbpol.2017.08.056] [Citation(s) in RCA: 28] [Impact Index Per Article: 4.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/06/2017] [Revised: 07/30/2017] [Accepted: 08/10/2017] [Indexed: 01/25/2023]
|
22
|
Romano EF, Holdsworth CI, Quirino JP, So RC. Room temperature synthesis and binding studies of solution-processable histamine-imprinted microspheres. J Mol Recognit 2017; 31. [PMID: 28872251 DOI: 10.1002/jmr.2659] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/28/2017] [Revised: 06/29/2017] [Accepted: 08/02/2017] [Indexed: 11/08/2022]
Abstract
Accurate quantification of histamine levels in food and in biological samples is important for monitoring the quality of food products and for the detection of pathophysiological conditions. In this study, solution processable histamine-imprinted microspheres were synthesized at 30°C via dilute free radical phototochemical polymerization technique using ethylene glycol dimethacrylate (EGDMA) as the crosslinker and methacrylic acid (MAA) as the monomer. The processability of the resulting polymer is dictated by the monomer feed concentration (eg, 4 wt% 80:20 EGDMA:MAA formulation) and solvent (acetonitrile). Whereas, the particle size is influenced by the monomer feed concentration, the presence of template molecule, and independent of the crosslinker content. Evaluation of the binding performance of the photochemically imprinted polymers (PCP) with different crosslinker content (80 and 90 wt%) indicated that the selective binding capacity was notably higher in PCP-80 (N= 16.0 μmol/g) compared to PCP-90 (N= 10.1 μmol/g) when analyzed via frontal analysis capillary electrophoresis (FACE) using Freundlich isotherm. In addition, PCP-80 microspheres are more selective toward histamine than conventional thermal polymers (CTP-80) prepared at 60°C in the presence of structural analogs such as histidine, imidazole, and tryptamine under cross-rebinding and competitive conditions. These results demonstrated that histamine-selective imprinted polymers can be obtained readily using room temperature photochemical polymerization where these materials can be subsequently used as recognition element for optical-based histamine sensing.
Collapse
Affiliation(s)
- Edwin F Romano
- Department of Chemistry, Ateneo de Manila University, Quezon City, Philippines.,Department of Chemistry, College of Arts and Sciences, Negros Oriental State University, Dumaguete City, Philippines
| | - Clovia I Holdsworth
- School of Environmental and Life Sciences, Chemistry Building-C218, University of Newcastle, Callaghan, New South Wales, Australia
| | - Joselito P Quirino
- Australian Centre for Research on Separation Science (ACROSS), School of Chemistry, University of Tasmania, Hobart, Tasmania, Australia
| | - Regina C So
- Department of Chemistry, Ateneo de Manila University, Quezon City, Philippines
| |
Collapse
|
23
|
Foguel MV, Pedro NTB, Wong A, Khan S, Zanoni MVB, Sotomayor MDPT. Synthesis and evaluation of a molecularly imprinted polymer for selective adsorption and quantification of Acid Green 16 textile dye in water samples. Talanta 2017; 170:244-251. [DOI: 10.1016/j.talanta.2017.04.013] [Citation(s) in RCA: 34] [Impact Index Per Article: 4.9] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/11/2017] [Revised: 04/05/2017] [Accepted: 04/07/2017] [Indexed: 10/19/2022]
|
24
|
Akhoundian M, Rüter A, Shinde S. Ultratrace Detection of Histamine Using a Molecularly-Imprinted Polymer-Based Voltammetric Sensor. SENSORS 2017; 17:s17030645. [PMID: 28335573 PMCID: PMC5375931 DOI: 10.3390/s17030645] [Citation(s) in RCA: 41] [Impact Index Per Article: 5.9] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 02/06/2017] [Revised: 03/09/2017] [Accepted: 03/17/2017] [Indexed: 11/16/2022]
Abstract
Rapid and cost-effective analysis of histamine, in food, environmental, and diagnostics research has been of interest recently. However, for certain applications, the already-existing biological receptor-based sensing methods have usage limits in terms of stability and costs. As a result, robust and cost-effective imprinted polymeric receptors can be the best alternative. In the present work, molecularly-imprinted polymers (MIPs) for histamine were synthesized using methacrylic acid in chloroform and acetonitrile as two different porogens. The binding affinity of the MIPs with histamine was evaluated in aqueous media. MIPs synthesized in chloroform displayed better imprinting properties for histamine. We demonstrate here histamine MIPs incorporated into a carbon paste (CP) electrode as a MIP-CP electrode sensor platforms for detection of histamine. This simple sensor format allows accurate determination of histamine in the sub-nanomolar range using an electrochemical method. The sensor exhibited two distinct linear response ranges of 1 × 10-10-7 × 10-9 M and 7 × 10-9-4 × 10-7 M. The detection limit of the sensor was calculated equal to 7.4 × 10-11 M. The specificity of the proposed electrode for histamine is demonstrated by using the analogous molecules and other neurotransmitters such as serotonin, dopamine, etc. The MIP sensor was investigated with success on spiked serum samples. The easy preparation, simple procedure, and low production cost make the MIP sensor attractive for selective and sensitive detection of analytes, even in less-equipped laboratories with minimal training.
Collapse
Affiliation(s)
- Maedeh Akhoundian
- Department of Biomedical Sciences, Faculty of Health and Society, Malmö University, Malmö SE-20506, Sweden.
| | - Axel Rüter
- Department of Biomedical Sciences, Faculty of Health and Society, Malmö University, Malmö SE-20506, Sweden.
| | - Sudhirkumar Shinde
- Department of Biomedical Sciences, Faculty of Health and Society, Malmö University, Malmö SE-20506, Sweden.
| |
Collapse
|
25
|
Romano EF, Quirino JP, Holdsworth JL, So RC, Holdsworth CI. Assessment of the binding performance of histamine-imprinted microspheres by frontal analysis capillary electrophoresis. Electrophoresis 2017; 38:1251-1259. [PMID: 28258613 DOI: 10.1002/elps.201600448] [Citation(s) in RCA: 4] [Impact Index Per Article: 0.6] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/26/2016] [Revised: 02/16/2017] [Accepted: 02/24/2017] [Indexed: 11/09/2022]
Abstract
Frontal analysis capillary electrophoresis was used to evaluate the binding performance of molecularly imprinted microspheres (MIM) toward its template histamine and analogs at pH 7, and compared to the high performance liquid chromatographic method. In both methods, batch binding was employed and the binding parameters were calculated from the measured concentration of unbound amine analytes and afforded comparable histamine equilibrium dissociation constants (Kd ∼ 0.4 mM). FACE was easily carried out at shorter binding equilibration time (i.e. 30 min) and without the need to separate the microspheres, circumventing laborious and, in the case of the system under study, inefficient sample filtration. It also allowed for competitive binding studies by virtue of its ability to distinctly separate intact microspheres and all tested amines which could not be resolved in HPLC. Kd 's for nonimprinted (control) microspheres (NIM) from FACE and HPLC were also comparable (∼ 0.6 mM) but at higher histamine concentrations, HPLC gave lower histamine binding. This discrepancy was attributed to inefficient filtration of the batch binding samples prior to HPLC analysis resulting in an over-estimation of the concentration of free histamine brought about by the presence of unfiltered histamine-bound microspheres.
Collapse
Affiliation(s)
- Edwin F Romano
- Department of Chemistry, School of Science and Engineering, Ateneo de Manila University, Quezon City, Philippines.,Department of Chemistry, College of Arts and Sciences, Negros Oriental State University, Dumaguete City, Philippines
| | - Joselito P Quirino
- Australian Centre for Research on Separation Science (ACROSS), School of Chemistry, University of Tasmania, Hobart, Tasmania, Australia
| | - John L Holdsworth
- School of Mathematical and Physical Sciences, University of Newcastle, Newcastle, NSW, Australia
| | - Regina C So
- Department of Chemistry, School of Science and Engineering, Ateneo de Manila University, Quezon City, Philippines
| | - Clovia I Holdsworth
- Discipline of Chemistry, School of Environmental and Life Sciences, University of Newcastle, Newcastle, NSW, Australia
| |
Collapse
|
26
|
Selectivity and Efficiency of Conductive Molecularly Imprinted Polymer (c-MIP) Based on 5-Phenyl-Dipyrromethane and 5-Phenol-Dipyrromethane for Quorum Sensing Precursors Detection. CHEMOSENSORS 2017. [DOI: 10.3390/chemosensors5010005] [Citation(s) in RCA: 5] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 11/16/2022]
|
27
|
Molecularly Imprinted Polymer (MIP): A Promising Recognition System for Development of Optical Sensor for Textile Dyes. ACTA ACUST UNITED AC 2017. [DOI: 10.1016/j.protcy.2017.04.123] [Citation(s) in RCA: 4] [Impact Index Per Article: 0.6] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/21/2022]
|
28
|
Voccia D, Sosnowska M, Bettazzi F, Roscigno G, Fratini E, De Franciscis V, Condorelli G, Chitta R, D’Souza F, Kutner W, Palchetti I. Direct determination of small RNAs using a biotinylated polythiophene impedimetric genosensor. Biosens Bioelectron 2017; 87:1012-1019. [DOI: 10.1016/j.bios.2016.09.058] [Citation(s) in RCA: 48] [Impact Index Per Article: 6.9] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/15/2016] [Revised: 09/02/2016] [Accepted: 09/16/2016] [Indexed: 12/14/2022]
|
29
|
A Nanoporous Alumina Membrane Based Electrochemical Biosensor for Histamine Determination with Biofunctionalized Magnetic Nanoparticles Concentration and Signal Amplification. SENSORS 2016; 16:s16101767. [PMID: 27782087 PMCID: PMC5087551 DOI: 10.3390/s16101767] [Citation(s) in RCA: 29] [Impact Index Per Article: 3.6] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 09/15/2016] [Revised: 10/10/2016] [Accepted: 10/17/2016] [Indexed: 02/04/2023]
Abstract
Histamine is an indicator of food quality and indispensable in the efficient functioning of various physiological systems. Rapid and sensitive determination of histamine is urgently needed in food analysis and clinical diagnostics. Traditional histamine detection methods require qualified personnel, need complex operation processes, and are time-consuming. In this study, a biofunctionalized nanoporous alumina membrane based electrochemical biosensor with magnetic nanoparticles (MNPs) concentration and signal amplification was developed for histamine determination. Nanoporous alumina membranes were modified by anti-histamine antibody and integrated into polydimethylsiloxane (PDMS) chambers. The specific antibody modified MNPs were used to concentrate histamine from samples and transferred to the antibody modified nanoporous membrane. The MNPs conjugated to histamine were captured in the nanopores via specific reaction between histamine and anti-histamine antibody, resulting in a blocking effect that was amplified by MNPs in the nanopores. The blockage signals could be measured by electrochemical impedance spectroscopy across the nanoporous alumina membrane. The sensing platform had great sensitivity and the limit of detection (LOD) reached as low as 3 nM. This biosensor could be successfully applied for histamine determination in saury that was stored in frozen conditions for different hours, presenting a potentially novel, sensitive, and specific sensing system for food quality assessment and safety support.
Collapse
|
30
|
Dabrowski M, Sharma PS, Iskierko Z, Noworyta K, Cieplak M, Lisowski W, Oborska S, Kuhn A, Kutner W. Early diagnosis of fungal infections using piezomicrogravimetric and electric chemosensors based on polymers molecularly imprinted with d-arabitol. Biosens Bioelectron 2016; 79:627-35. [DOI: 10.1016/j.bios.2015.12.088] [Citation(s) in RCA: 34] [Impact Index Per Article: 4.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/21/2015] [Revised: 12/20/2015] [Accepted: 12/24/2015] [Indexed: 11/24/2022]
|
31
|
Sharma PS, Wojnarowicz A, Sosnowska M, Benincori T, Noworyta K, D’Souza F, Kutner W. Potentiometric chemosensor for neopterin, a cancer biomarker, using an electrochemically synthesized molecularly imprinted polymer as the recognition unit. Biosens Bioelectron 2016; 77:565-72. [DOI: 10.1016/j.bios.2015.10.013] [Citation(s) in RCA: 35] [Impact Index Per Article: 4.4] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/22/2015] [Revised: 09/15/2015] [Accepted: 10/05/2015] [Indexed: 11/30/2022]
|
32
|
Zahedi P, Ziaee M, Abdouss M, Farazin A, Mizaikoff B. Biomacromolecule template-based molecularly imprinted polymers with an emphasis on their synthesis strategies: a review. POLYM ADVAN TECHNOL 2016. [DOI: 10.1002/pat.3754] [Citation(s) in RCA: 45] [Impact Index Per Article: 5.6] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/16/2022]
Affiliation(s)
- Payam Zahedi
- Nano-Biopolymers Research Laboratory, School of Chemical Engineering, College of Engineering; University of Tehran; PO Box 11155-4563 Tehran Iran
| | - Morteza Ziaee
- Nano-Biopolymers Research Laboratory, School of Chemical Engineering, College of Engineering; University of Tehran; PO Box 11155-4563 Tehran Iran
| | - Majid Abdouss
- Department of Chemistry; Amirkabir University of Technology (Tehran Polytechnic); Tehran Iran
| | - Alireza Farazin
- Department of Chemistry, Faculty of Science; University of Tehran; Tehran Iran
| | - Boris Mizaikoff
- Institute of Analytical and Bioanalytical Chemistry; University of Ulm; 89081 Ulm Germany
| |
Collapse
|
33
|
Wojnarowicz A, Sharma PS, Sosnowska M, Lisowski W, Huynh TP, Pszona M, Borowicz P, D'Souza F, Kutner W. An electropolymerized molecularly imprinted polymer for selective carnosine sensing with impedimetric capacity. J Mater Chem B 2016; 4:1156-1165. [DOI: 10.1039/c5tb02260f] [Citation(s) in RCA: 14] [Impact Index Per Article: 1.8] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/21/2022]
Abstract
Functional monomers are designed for the development of a polymer with molecular cavities selective for the carnosine dipeptide recognition and quantification.
Collapse
Affiliation(s)
| | | | - Marta Sosnowska
- Institute of Physical Chemistry (IPC PAS)
- 01-224 Warsaw
- Poland
- Department of Chemistry
- University of North Texas
| | | | - Tan-Phat Huynh
- Institute of Physical Chemistry (IPC PAS)
- 01-224 Warsaw
- Poland
- Department of Chemistry
- University of North Texas
| | - Maria Pszona
- Institute of Physical Chemistry (IPC PAS)
- 01-224 Warsaw
- Poland
| | - Paweł Borowicz
- Institute of Physical Chemistry (IPC PAS)
- 01-224 Warsaw
- Poland
- Institute of Electron Technology
- 02-668 Warsaw
| | | | - Wlodzimierz Kutner
- Institute of Physical Chemistry (IPC PAS)
- 01-224 Warsaw
- Poland
- Faculty of Mathematics and Natural Sciences
- School of Sciences
| |
Collapse
|
34
|
Cytosine derivatized bis(2,2′-bithienyl)methane molecularly imprinted polymer for selective recognition of 6-thioguanine, an antitumor drug. Biosens Bioelectron 2015; 70:153-60. [DOI: 10.1016/j.bios.2015.03.001] [Citation(s) in RCA: 31] [Impact Index Per Article: 3.4] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/15/2014] [Revised: 02/11/2015] [Accepted: 03/02/2015] [Indexed: 12/11/2022]
|
35
|
Huynh TP, Sharma PS, Sosnowska M, D'Souza F, Kutner W. Functionalized polythiophenes: Recognition materials for chemosensors and biosensors of superior sensitivity, selectivity, and detectability. Prog Polym Sci 2015. [DOI: 10.1016/j.progpolymsci.2015.04.009] [Citation(s) in RCA: 73] [Impact Index Per Article: 8.1] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/23/2022]
|
36
|
Molecularly imprinted polymers as recognition materials for electronic tongues. Biosens Bioelectron 2015; 74:856-64. [PMID: 26233642 DOI: 10.1016/j.bios.2015.07.054] [Citation(s) in RCA: 34] [Impact Index Per Article: 3.8] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/15/2015] [Revised: 07/10/2015] [Accepted: 07/23/2015] [Indexed: 01/18/2023]
Abstract
For over three decades now, molecularly imprinted polymers (MIPs) have successfully been used for selective chemical sensing because the shape and size of their imprinted molecular cavities perfectly matched those of the target analyte molecules. Moreover, orientation of recognizing sites of these cavities corresponded to those of the binding sites of the template molecules. In contrast, electronic tongue (e-tongue) is usually an array of low-affinity recognition units. Its selectivity is based on recognition pattern or multivariate analysis. Merging these two sensing devices led to a synergetic hybrid sensor, an MIP based e-tongue. Fabrication of these e-tongues permitted simultaneous sensing and discriminating several analytes in complex solutions of many components so that these arrays compensated for limitation in cross-reactivity of MIPs. Apparently, analytical signals generated by MIP-based e-tongues, compared to those of ordinary sensor arrays, were more reliable where a unique pattern or 'fingerprint' for each analyte was generated. Additionally, several transduction platforms (from spectroscopic to electrochemical) engaged in constructing MIP-based e-tongues, found their broad and flexible applications. The present review critically evaluates achievements in recent developments of the MIP based e-tongues for chemosensing.
Collapse
|
37
|
Li Y, Zhao X, Li P, Huang Y, Wang J, Zhang J. Highly sensitive Fe 3 O 4 nanobeads/graphene-based molecularly imprinted electrochemical sensor for 17β-estradiol in water. Anal Chim Acta 2015; 884:106-13. [DOI: 10.1016/j.aca.2015.05.022] [Citation(s) in RCA: 70] [Impact Index Per Article: 7.8] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/26/2015] [Revised: 04/26/2015] [Accepted: 05/11/2015] [Indexed: 11/15/2022]
|
38
|
Cennamo N, De Maria L, D'Agostino G, Zeni L, Pesavento M. Monitoring of low levels of furfural in power transformer oil with a sensor system based on a POF-MIP platform. SENSORS 2015; 15:8499-511. [PMID: 25871719 PMCID: PMC4431280 DOI: 10.3390/s150408499] [Citation(s) in RCA: 23] [Impact Index Per Article: 2.6] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 01/12/2015] [Revised: 03/27/2015] [Accepted: 04/02/2015] [Indexed: 11/25/2022]
Abstract
In this work an innovative, miniaturized and low cost optical chemical sensor (POF-MIP platform), based on a molecular imprinted polymer (MIP) and surface plasmon resonance in a plastic optical fiber (POF), is presented and preliminarily tested for monitoring of furfural (furan-2-carbaldehyde) in transformer oil. To this end, the optical platform was coupled to an MIP layer, highly selective for furfural. The ability of the developed sensor to directly detect furfural in the insulating oil was investigated. The detection limit of the sensor has been found to be 9 ppb, with a linear response up to about 30 ppb. However there is a sensible response up to 0.15 ppm. Because of the small linearity range, the Hill equation is suggested for the quantification. The sensor has been effectively tested in real oil samples collected from aged electrical equipment removed from service. The assessed concentration of furfural is in good agreement with that evaluated by a high pressure liquid chromatography (HLPC) method, confirming the good selectivity of the proposed sensor.
Collapse
Affiliation(s)
- Nunzio Cennamo
- Department of Industrial and Information Engineering, Second University of Naples, Via Roma 29, Aversa 81031, Italy.
| | - Letizia De Maria
- Department of Transmission and Distribution Technologies, RSE Research on Energetic System S.p.A, Via Rubattino 54, Milano 20134, Italy.
| | - Girolamo D'Agostino
- Department of Chemistry, University of Pavia, Via Taramelli, Pavia 12-27100, Italy.
| | - Luigi Zeni
- Department of Industrial and Information Engineering, Second University of Naples, Via Roma 29, Aversa 81031, Italy.
| | - Maria Pesavento
- Department of Chemistry, University of Pavia, Via Taramelli, Pavia 12-27100, Italy.
| |
Collapse
|
39
|
Yoshimi Y, Ishii N. Improved gate effect enantioselectivity of phenylalanine-imprinted polymers in water by blending crosslinkers. Anal Chim Acta 2015; 862:77-85. [DOI: 10.1016/j.aca.2015.01.001] [Citation(s) in RCA: 12] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/10/2014] [Revised: 12/01/2014] [Accepted: 01/02/2015] [Indexed: 10/24/2022]
|
40
|
Ma RT, Shi YP. Magnetic molecularly imprinted polymer for the selective extraction of quercetagetin from Calendula officinalis extract. Talanta 2015; 134:650-656. [DOI: 10.1016/j.talanta.2014.12.003] [Citation(s) in RCA: 61] [Impact Index Per Article: 6.8] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/11/2014] [Revised: 12/04/2014] [Accepted: 12/06/2014] [Indexed: 01/16/2023]
|
41
|
Nicotine molecularly imprinted polymer: Synergy of coordination and hydrogen bonding. Biosens Bioelectron 2015; 64:657-63. [DOI: 10.1016/j.bios.2014.09.014] [Citation(s) in RCA: 25] [Impact Index Per Article: 2.8] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/15/2014] [Revised: 08/29/2014] [Accepted: 09/04/2014] [Indexed: 01/17/2023]
|
42
|
Sharma PS, Iskierko Z, Pietrzyk-Le A, D'Souza F, Kutner W. Bioinspired intelligent molecularly imprinted polymers for chemosensing: A mini review. Electrochem commun 2015. [DOI: 10.1016/j.elecom.2014.11.019] [Citation(s) in RCA: 69] [Impact Index Per Article: 7.7] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/22/2022] Open
|
43
|
Whitcombe MJ, Kirsch N, Nicholls IA. Molecular imprinting science and technology: a survey of the literature for the years 2004-2011. J Mol Recognit 2014; 27:297-401. [PMID: 24700625 DOI: 10.1002/jmr.2347] [Citation(s) in RCA: 275] [Impact Index Per Article: 27.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/13/2013] [Revised: 10/28/2013] [Accepted: 12/01/2013] [Indexed: 12/11/2022]
Abstract
Herein, we present a survey of the literature covering the development of molecular imprinting science and technology over the years 2004-2011. In total, 3779 references to the original papers, reviews, edited volumes and monographs from this period are included, along with recently identified uncited materials from prior to 2004, which were omitted in the first instalment of this series covering the years 1930-2003. In the presentation of the assembled references, a section presenting reviews and monographs covering the area is followed by sections describing fundamental aspects of molecular imprinting including the development of novel polymer formats. Thereafter, literature describing efforts to apply these polymeric materials to a range of application areas is presented. Current trends and areas of rapid development are discussed.
Collapse
|
44
|
Lépinay S, Ianoul A, Albert J. Molecular imprinted polymer-coated optical fiber sensor for the identification of low molecular weight molecules. Talanta 2014; 128:401-7. [DOI: 10.1016/j.talanta.2014.04.037] [Citation(s) in RCA: 38] [Impact Index Per Article: 3.8] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/18/2014] [Revised: 04/10/2014] [Accepted: 04/11/2014] [Indexed: 12/26/2022]
|
45
|
A phage display screening derived Peptide with affinity for the adeninyl moiety. BIOSENSORS-BASEL 2014; 4:137-49. [PMID: 25587414 PMCID: PMC4264375 DOI: 10.3390/bios4020137] [Citation(s) in RCA: 7] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 03/04/2014] [Revised: 04/11/2014] [Accepted: 04/23/2014] [Indexed: 11/18/2022]
Abstract
Phage display screening of a surface-immobilized adenine derivative led to the identification of a heptameric peptide with selectivity for adenine as demonstrated through quartz crystal microbalance (QCM) studies. The peptide demonstrated a concentration dependent affinity for an adeninyl moiety decorated surface (KD of 968 ± 53.3 μM), which highlights the power of piezoelectric sensing in the study of weak interactions.
Collapse
|
46
|
Hierarchical Thin Film Architectures for Enhanced Sensor Performance: Liquid Crystal-Mediated Electrochemical Synthesis of Nanostructured Imprinted Polymer Films for the Selective Recognition of Bupivacaine. BIOSENSORS-BASEL 2014; 4:90-110. [PMID: 25587412 PMCID: PMC4264373 DOI: 10.3390/bios4020090] [Citation(s) in RCA: 13] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 02/11/2014] [Revised: 03/15/2014] [Accepted: 03/28/2014] [Indexed: 01/24/2023]
Abstract
Nanostructured bupivacaine-selective molecularly imprinted 3-aminophenylboronic acid-p-phenylenediamine co-polymer (MIP) films have been prepared on gold-coated quartz (Au/quartz) resonators by electrochemical synthesis under cyclic voltammetric conditions in a liquid crystalline (LC) medium (triton X-100/water). Films prepared in water and in the absence of template were used for control studies. Infrared spectroscopic studies demonstrated comparable chemical compositions for LC and control polymer films. SEM studies revealed that the topologies of the molecularly imprinted polymer films prepared in the LC medium (LC-MIP) exhibit discernible 40 nm thick nano-fiber structures, quite unlike the polymers prepared in the absence of the LC-phase. The sensitivity of the LC-MIP in a quartz crystal microbalance (QCM) sensor platform was 67.6 ± 4.9 Hz/mM under flow injection analysis (FIA) conditions, which was ≈250% higher than for the sensor prepared using the aqueous medium. Detection was possible at 100 nM (30 ng/mL), and discrimination of bupivacaine from closely related structural analogs was readily achieved as reflected in the corresponding stability constants of the MIP-analyte complexes. The facile fabrication and significant enhancement in sensor sensitivity together highlight the potential of this LC-based imprinting strategy for fabrication of polymeric materials with hierarchical architectures, in particular for use in surface-dependent application areas, e.g., biomaterials or sensing.
Collapse
|
47
|
Elmlund L, Suriyanarayanan S, Wiklander JG, Aastrup T, Nicholls IA. Biotin selective polymer nano-films. J Nanobiotechnology 2014; 12:8. [PMID: 24655809 PMCID: PMC3994413 DOI: 10.1186/1477-3155-12-8] [Citation(s) in RCA: 12] [Impact Index Per Article: 1.2] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/13/2014] [Accepted: 03/14/2014] [Indexed: 11/17/2022] Open
Abstract
Background The interaction between biotin and avidin is utilized in a wide range of assay and diagnostic systems. A robust material capable of binding biotin should offer scope in the development of reusable assay materials and biosensor recognition elements. Results Biotin-selective thin (3–5 nm) films have been fabricated on hexadecanethiol self assembled monolayer (SAM) coated Au/quartz resonators. The films were prepared based upon a molecular imprinting strategy where N,N'-methylenebisacrylamide and 2-acrylamido-2-methylpropanesulfonic acid were copolymerized and grafted to the SAM-coated surface in the presence of biotin methyl ester using photoinitiation with physisorbed benzophenone. The biotinyl moiety selectivity of the resonators efficiently differentiated biotinylated peptidic or carbohydrate structures from their native counterparts. Conclusions Molecularly imprinted ultra thin films can be used for the selective recognition of biotinylated structures in a quartz crystal microbalance sensing platform. These films are stable for periods of at least a month. This strategy should prove of interest for use in other sensing and assay systems.
Collapse
Affiliation(s)
| | | | | | | | - Ian A Nicholls
- Bioorganic & Biophysical Chemistry Laboratory, Centre for Biomaterials Chemistry, Linnæus University, Kalmar SE-391 82, Sweden.
| |
Collapse
|
48
|
Vishnoi P, Walawalkar MG, Sen S, Datta A, Patwari GN, Murugavel R. Selective fluorescence sensing of polynitroaromatic explosives using triaminophenylbenzene scaffolds. Phys Chem Chem Phys 2014; 16:10651-8. [DOI: 10.1039/c4cp00930d] [Citation(s) in RCA: 57] [Impact Index Per Article: 5.7] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/21/2022]
Abstract
C3-Symmetric 1,3,5-tris(4′-aminophenyl)benzene has been employed as a selective fluorescence chemosensor for polynitroaromatic compounds.
Collapse
Affiliation(s)
- Pratap Vishnoi
- Department of Chemistry
- Indian Institute of Technology Bombay
- Mumbai, India-400 076
| | | | - Saumik Sen
- Department of Chemistry
- Indian Institute of Technology Bombay
- Mumbai, India-400 076
| | - Anindya Datta
- Department of Chemistry
- Indian Institute of Technology Bombay
- Mumbai, India-400 076
| | - G. Naresh Patwari
- Department of Chemistry
- Indian Institute of Technology Bombay
- Mumbai, India-400 076
| | - Ramaswamy Murugavel
- Department of Chemistry
- Indian Institute of Technology Bombay
- Mumbai, India-400 076
| |
Collapse
|
49
|
New 5-bromo-2-hydroxybenzaldehyde S-ethylisothiosemicarbazone and its mixed-ligand Cu(II) complex with imidazole: synthesis, characterization and DFT calculation. OPEN CHEM 2013. [DOI: 10.2478/s11532-013-0313-5] [Citation(s) in RCA: 5] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/21/2022] Open
Abstract
AbstractA new Schiff base ligand of 5-bromo-2-hydroxybenzaldehyde S-ethyl-isothiosemicarbazone (H2L) was synthesized and its mixed-ligand Cu(II) complex was also prepared by reaction of Cu(NO3)2·3H2O with H2L and imidazole. Their structures were fully characterized by elemental analysis, FT-IR, molar conductivity and UV-Vis methods. The analytical data suggest that the metal, H2L and imidazole ratios in the Schiff base complex are 1:1:1. Single crystal diffraction was also used to better understand the molecular structure of the Cu(II) complex. The results of physico-chemical analyses of the Schiff base complex reveal the coordination geometry around the central atom is square planar. The H2L ligand (NNO donor) is coordinated to the metal center as a tridentate bionegatively agent. Another position of the square planar geometry is occupied by the imidazole ligand. Furthermore, computational studies of the new complex were performed by carrying out DFT calculations. Geometry optimization and natural band analysis of the complex is discussed in further detail.
Collapse
|
50
|
Molecularly imprinted polymer of bis(2,2′-bithienyl)methanes for selective determination of adrenaline. Bioelectrochemistry 2013; 93:37-45. [DOI: 10.1016/j.bioelechem.2012.07.003] [Citation(s) in RCA: 38] [Impact Index Per Article: 3.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/04/2012] [Revised: 07/10/2012] [Accepted: 07/11/2012] [Indexed: 11/17/2022]
|