Electrochemical Detection of Epidermal Growth Factor Receptors on a Single Living Cell Surface by Scanning Electrochemical Microscopy

Alkaline Phosphatase for Estimating the Time since Deposition of Blood Fingerprints by Scanning Electrochemical Microscopy

Blood is one of the most frequent and valuable traces encountered at crime scenes, where knowing the time since deposition (TSD) of bloodstains tremendously assists forensic experts to screen out crime-related evidence and aids in the reconstruction of the event sequence. Although increasing proof-of-concept methodologies for investigating the TSD of bloodstains have been reported, there is still no accepted strategy in forensic practice as the aging mechanism involves complex components, leading to the inaccuracy of the estimation results. Herein, an endogenous biomarker of alkaline phosphatase (ALP) was chosen to investigate the TSD by scanning electrochemical microscopy (SECM). Results demonstrate that the ALP activity acquired via SECM lateral scan assay exhibited a clear decrease over time, and a similar trend was observed on both poly(vinylidene fluoride) (PVDF) membrane and glass, with the aging kinetics on PVDF membrane being faster than glass. By means of quantitatively calculating the flux of generated p-aminophenol (PAP), we established the aging curve and realized the TSD estimation of blood fingerprints (BFPs) that was unable to be distinguished via optical measurements. Intriguingly, the as-obtained estimation accuracy ranged from 74.6 to 93.7%, proving the possibility of using an ALP biomarker and SECM. More appealingly, the predicted TSDs were capable of accurately differentiating the deposition sequence of overlapping BFPs, which was hardly achieved by optical means. Therefore, this proof-of-concept strategy demonstrates the value of SECM as a forensic tool and opens possibilities for revealing multidimensional information about crime.

Temperature Effect on the Electrochemical Current Response during Scanning Electrochemical Microscopy of Living Cells

Scanning electrochemical microscopy (SECM) is being used increasingly to monitor electrochemical processes at the interface of living cells and electrodes. This allows the detection and quantification of biomarkers that further the understanding of various diseases. Rapid SECM experiments are often carried out without monitoring the analyte solution temperature or are performed at room temperature. The reported research demonstrates that temperature control is crucial during SECM imaging of living cells to obtain reliable data. In this study, a SECM-integrated thermostatic ring on the sample stage enabled imaging of living biological cells in a constant height mode at various temperatures. Two-dimensional line scans were conducted while scanning single Adenocarcinoma Cervical cancer (HeLa) cells. Numerical modeling was carried out to evaluate the effect of the temperature on the electrochemical current response of living cells to compare the apparent heterogeneous rate constant (k0), representing cellular reaction kinetics. This study reveals that even slight temperature variations of approximately 2 °C affect the reaction kinetics of single living cells, altering the measured current during SECM.

In situ monitoring of the effect of Cu2+ on the membrane permeability of a single living cell with a dual-electrode tip of a scanning electrochemical microscope

Here, an Au-Cu dual-electrode tip was designed to monitor the effect of Cu²⁺ on the membrane permeability of a single living cell in situ using scanning electrochemical microscopy. The probe approach curves (PACs) were obtained using potassium ferricyanide as a redox mediator. Meanwhile, according to the simulation, theoretical PACs could be acquired. Thus, the cell membrane permeability coefficient (P_m) values were obtained by overlapping the experimental PACs with the theoretical values. Cu²⁺ was directly generated by electrolyzing the Cu electrode of the dual-electrode tip to investigate its effect on the cell membrane permeability in situ. This work has potential value to improve the understanding of the mechanism of acute heavy metal damage on the cell membrane and will also help clarify the role of heavy metal ions in physiological or pathological processes.

Redox Electrochemistry to Interrogate and Control Biomolecular Communication

Cells often communicate by the secretion, transport, and perception of molecules. Information conveyed by molecules is encoded, transmitted, and decoded by cells within the context of the prevailing microenvironments. Conversely, in electronics, transmission reliability and message validation are predictable, robust, and less context dependent. In turn, many transformative advances have resulted by the formal consideration of information transfer. One way to explore this potential for biological systems is to create bio-device interfaces that facilitate bidirectional information transfer between biology and electronics. Redox reactions enable this linkage because reduction and oxidation mediate communication within biology and can be coupled with electronics. By manipulating redox reactions, one is able to combine the programmable features of electronics with the ability to interrogate and modulate biological function. In this review, we examine methods to electrochemically interrogate the various components of molecular communication using redox chemistry and to electronically control cell communication using redox electrogenetics.

Scanning electrochemical microscopy in the development of enzymatic sensors and immunosensors

Scanning electrochemical microscopy (SECM) is very useful, non-invasive tool for the analysis of surfaces pre-modified with biomolecules or by whole cells. This review focuses on the application of SECM technique for the analysis of surfaces pre-modified with enzymes (horseradish peroxidase, alkaline phosphatase and glucose oxidase) or labelled with antibody-enzyme conjugates. The working principles and operating modes of SECM are outlined. The applicability of feedback, generation-collection and redox competition modes of SECM on surfaces modified by enzymes or labelled with antibody-enzyme conjugates is discussed. SECM is important in the development of miniaturized bioanalytical systems with enzymes, since it can provide information about the local enzyme activity. Technical challenges and advantages of SECM, experimental parameters, used enzymes and redox mediators, immunoassay formats and analytical parameters of enzymatic SECM sensors and immunosensors are reviewed.

Recent advances in single-cell analysis by mass spectrometry

Cells are the most basic structural units that play vital roles in the functioning of living organisms. Analysis of the chemical composition and content of a single cell plays a vital role in ensuring precise investigations of cellular metabolism, and is a crucial aspect of lipidomic and proteomic studies. In addition, structural knowledge provides a better understanding of cell behavior as well as the cellular and subcellular mechanisms. However, single-cell analysis can be very challenging due to the very small size of each cell as well as the large variety and extremely low concentrations of substances found in individual cells. On account of its high sensitivity and selectivity, mass spectrometry holds great promise as an effective technique for single-cell analysis. Numerous mass spectrometric techniques have been developed to elucidate the molecular profiles at the cellular level, including electrospray ionization mass spectrometry (ESI-MS), secondary ion mass spectrometry (SIMS), laser-based mass spectrometry and inductively coupled plasma mass spectrometry (ICP-MS). In this review, the recent advances in single-cell analysis by mass spectrometry are summarized. The strategies of different ionization modes to achieve single-cell analysis are classified and discussed in detail.

Systematic Analysis of Different Cell Spheroids with a Microfluidic Device Using Scanning Electrochemical Microscopy and Gene Expression Profiling

The 3D cell spheroid is an emerging tool that allows better recapitulating of in vivo scenarios with multiple factors such as tissue-like morphology and membrane protein expression that intimately coordinates with enzyme activity, thus providing a psychological environment for tumorigenesis study. For analyzing different spheroids, conventional optical imaging may be hampered by the need for fluorescent labeling, which could cause toxicity side effects. As an alternative approach, scanning electrochemical microscopy (SECM) enables label-free imaging. However, SECM for cell spheroid imaging is currently suffering from incapability of systematically analyzing the cell aggregates from spheroid generation, electrochemical signal gaining, and the gene expression on different individual cell spheroids. Herein, we developed a top-removable microfluidic device for cell aggregate yielding and SECM imaging methodology to analyze heterotypic 3D cell spheroids on a single device. This technique allows not only on-chip culturing of cell aggregates but also SECM imaging of the spheroids after opening the chip and subsequent qPCR assay of corresponding clusters. Through employment of the micropit arrays (85 × 4) with a top withdrawable microfluidic layer, uniformly sized breast tumor cell and fibroblast spheroids can be simultaneously produced on a single device. By leveraging voltage-switching mode SECM at different potentials of dual mediators, we evaluated alkaline phosphatase without disturbance of substrate morphology for distinguishing the tumor aggregates from stroma. Moreover, this method also enables gene expression profiling on individual tumor or stromal spheroids. Therefore, this new strategy can seamlessly bridge SECM measurements and molecular biological analysis.

An improvement in scanning electrochemical microscopy based on a plasmon-accelerated electrochemical reaction

A plasmon-accelerated electrochemical reaction coupled with SECM provides an opportunity to improve the performance of SECM.

Electrochemical Biosensing System for Single Cells, Cellular Aggregates and Microenvironments

Applications of electrochemical biosensing for surveying intact cells and tissues have been focus of attention. Two experimental approaches have been used when performing amperometric measurements on biological cells, the stylus-type microelectrode probes and the electrode-integrated microdevices based on lithographic technologies. For the probe scanning approach, various types of microsensors were developed to monitor localized physical or chemical natures at a variety of surfaces in situ under wet conditions. Scanning electrochemical microscopy (SECM) has been applied for monitoring local oxygen, enzyme activity, and collection of transcripts. For the non-scanning type of approach, electrode array devices allow very rapid response, parallel monitoring, and multi-analyte assay. Sveral topics of on-chip-culture system were introduced especially concerning on gene expression monitoring by reporter system and reconstruction of in vivo-like nature by controlling microenvironments. Electrochemical reporter assay has been demonstrated to monitor the gene expression process of the gene-modified cultured cells. Long-term monitoring of cellular function of spheroids and three dimensionally-cultured cells were carried out by controlling microenvironments on the cellular chip.

Advanced Nanoscale Approaches to Single-(Bio)entity Sensing and Imaging

Individual (bio)chemical entities could show a very heterogeneous behaviour under the same conditions that could be relevant in many biological processes of significance in the life sciences. Conventional detection approaches are only able to detect the average response of an ensemble of entities and assume that all entities are identical. From this perspective, important information about the heterogeneities or rare (stochastic) events happening in individual entities would remain unseen. Some nanoscale tools present interesting physicochemical properties that enable the possibility to detect systems at the single-entity level, acquiring richer information than conventional methods. In this review, we introduce the foundations and the latest advances of several nanoscale approaches to sensing and imaging individual (bio)entities using nanoprobes, nanopores, nanoimpacts, nanoplasmonics and nanomachines. Several (bio)entities such as cells, proteins, nucleic acids, vesicles and viruses are specifically considered. These nanoscale approaches provide a wide and complete toolbox for the study of many biological systems at the single-entity level.

EGFR detection in extracellular vesicles of breast cancer patients through immunosensor based on silica-chitosan nanoplatform

In the present work, we designed a microfluidic electrochemical immunosensor with enough sensibility and precision to quantify epithermal growth factor receptor (EGFR) in plasma extracellular vesicles (EVs) of plasma from breast cancer patients. The sensor employs SiNPs coated with chitosan (SiNPs-CH) as reaction's platform, based on the covalently immobilization of monoclonal anti-EGFR on SiNPs-CH retained in the central channel (CC) of the microfluidic device. The synthetized SiNPs-CH were characterized by UV-visible spectroscopy (UV-visible), energy dispersive spectrometry (EDS), Nanoparticle Tracking Analysis (NTA) and transmission electron microscopy (TEM). EGFR was quantified by a direct sandwich immunoassay measuring through a horseradish peroxidase (HRP)-conjugated anti-EGFR. The enzymatic product (benzoquinone) was detected by reduction at - 100 mV on a sputtering gold electrode. The measured current was directly proportional to the level of EGFR in human serum samples. The linear range was from 0 ng mL^-1 to 50 ng mL^-1. The detection limit was 1.37 pg mL^-1, and the within- and between-assay coefficients of variation were below 6.25%. Finally, plasma samples from 30 early breast cancer patients and 20 healthy donor were analyzed by the novel method. EGFR levels in EVs (EVs-EGFR) were significantly higher than in the healthy control group (p = 0.002) and also, more sensitivity and specificity than normal serum markers like CEA and CA15.3 has been observed. EVs-EGFR concentration correlates with EGFR tumor status (p = 0.0003) as well as it correlate with the tumor size and pathological grade. To conclude, plasma EVs are suitable for proteomic characterization of cancer disease, as long as the employed method has sufficient sensitivity, like the case of immune-electrochemical nanosensors with incremented reaction surface.

Biological imaging with scanning electrochemical microscopy

Scanning electrochemical microscopy (SECM) is a powerful and versatile technique for visualizing the local electrochemical activity of a surface as an ultramicroelectrode tip is moved towards or over a sample of interest using precise positioning systems. In comparison with other scanning probe techniques, SECM not only enables topographical surface mapping but also gathers chemical information with high spatial resolution. Considerable progress has been made in the analysis of biological samples, including living cells and immobilized biomacromolecules such as enzymes, antibodies and DNA fragments. Moreover, combinations of SECM with comple-mentary analytical tools broadened its applicability and facilitated multi-functional analysis with extended life science capabilities. The aim of this review is to present a brief topical overview on recent applications of biological SECM, with particular emphasis on important technical improvements of this surface imaging technique, recommended applications and future trends.

Catechol-chitosan redox capacitor for added amplification in electrochemical immunoanalysis

Antibodies are common recognition elements for molecular detection but often the signals generated by their stoichiometric binding must be amplified to enhance sensitivity. Here, we report that an electrode coated with a catechol-chitosan redox capacitor can amplify the electrochemical signal generated from an alkaline phosphatase (AP) linked immunoassay. Specifically, the AP product p-aminophenol (PAP) undergoes redox-cycling in the redox capacitor to generate amplified oxidation currents. We estimate an 8-fold amplification associated with this redox-cycling in the capacitor (compared to detection by a bare electrode). Importantly, this capacitor-based amplification is generic and can be coupled to existing amplification approaches based on enzyme-linked catalysis or magnetic nanoparticle-based collection/concentration. Thus, the capacitor should enhance sensitivities in conventional immunoassays and also provide chemical to electrical signal transduction for emerging applications in molecular communication.

Electrochemical imaging of cells and tissues

This minireview summarizes the recent achievements of electrochemical imaging platforms to map cellular functions in biological specimens using electrochemical scanning nano/micro-probe microscopy and 2D chips containing microelectrode arrays.

The technological and experimental progress in electrochemical imaging of biological specimens is discussed with a view on potential applications for skin cancer diagnostics, reproductive medicine and microbial testing. The electrochemical analysis of single cell activity inside cell cultures, 3D cellular aggregates and microtissues is based on the selective detection of electroactive species involved in biological functions. Electrochemical imaging strategies, based on nano/micrometric probes scanning over the sample and sensor array chips, respectively, can be made sensitive and selective without being affected by optical interference as many other microscopy techniques. The recent developments in microfabrication, electronics and cell culturing/tissue engineering have evolved in affordable and fast-sampling electrochemical imaging platforms. We believe that the topics discussed herein demonstrate the applicability of electrochemical imaging devices in many areas related to cellular functions.

Highly sensitive detection of epidermal growth factor receptor in lung cancer cells by aptamer-based target-/probe-mediated cyclic signal amplification

We develop an antibody-free fluorescence method for the epidermal growth factor receptor (EGFR) assay using aptamer-based target-/probe-mediated cyclic signal amplification. The method is highly sensitive with a detection limit of 0.16 fM, and it can be applied to detect EGFR in lung cancer cells, holding great potential in clinical diagnosis.

Binding-responsive catalysis of Taq DNA polymerase for the sensitive and selective detection of cell-surface proteins

Here we develop a new method for the sensitive and selective detection of cell-surface proteins with an aptamer probe designed for binding-responsive catalysis of Taq DNA polymerase. Taking the biotin receptor as a model, the method allows the detection of target protein on surfaces of different types of cancer cells.

Scanning electrochemical microscopy at the nanometer level

Chemical and electrochemical reactions at high temporal and spatial resolution can be studied using nanoscale SECM.

Open-label phase I clinical trial of Ad5-EBOV in Africans in China

BACKGROUND

To determine the safety and immunogenicity of a novel recombinant adenovirus type 5 vector based Ebola virus disease vaccine (Ad5-EBOV) in Africans in China.

METHODS

A phase 1, dose-escalation, open-label trial was conducted. 61 healthy Africans were sequentially enrolled, with 31 participants receiving one shot intramuscular injection and 30 participants receiving a double-shot regimen. Primary and secondary end points related to safety and immunogenicity were assessed within 28 d after vaccination. This study was registered with ClinicalTrials.gov (NCT02401373).

RESULTS

Ad5-EBOV is well tolerated and no adverse reaction of grade 3 or above was observed. 53 (86.89%) participants reported at least one adverse reaction within 28 d of vaccination. The most common reaction was fever and the mild pain at injection site, and there were no significant difference between these 2 groups. Ebola glycoprotein-specific antibodies appeared in all 61 participants and antibodies titers peaked after 28 d of vaccination. The geometric mean titres (GMTs) were similar between these 2 groups (1919.01 vs 1684.70 P = 0.5562). The glycoprotein-specific T-cell responses rapidly peaked after 14 d of vaccination and then decreased, however, the percentage of subjects with responses were much higher in the high-dose group (60.00% vs 9.68%, P = 0.0014). Pre-existing Ad5 neutralizing antibodies could significantly dampen the specific humoral immune response and cellular response to the vaccine.

CONCLUSION

The application of Ad5-EBOV demonstrated safe in Africans in China and a specific GP antibody and T-cell response could occur 14 d after the first immunization. This acceptable safety profile provides a reliable basis to proceed with trials in Africa.

Multiplex cell microarrays for high-throughput screening

Microarray technology was developed in the early 1990s to measure the transcription levels of thousands of genes in parallel. The basic premise of high-density arraying has since been expanded to create cell microarrays. Cells on chip are powerful experimental tools for high-throughput and multiplex screening of samples or cellular functions. Miniaturization increases assay throughput while reducing both reagent consumption and cell population heterogeneity effect, making these systems attractive for a wide range of assays, from drug discovery to toxicology, stem cell research and therapy. It is usual to functionalize the surface of a substrate to design cell microarrays. One form of cell microarrays, the transfected cell microarray, wherein plasmid DNA or siRNA spotted on the surface of a substrate is reverse-transfected locally into adherent cells, has become a standard tool for parallel cell-based analysis. With the advent of technology, cells can also be directly spotted onto functionalized surfaces using robotic fluid-dispensing devices or printed directly on bio-ink material. We are providing herein an overview of the latest developments in optical cell microarrays allowing high-throughput and high-content analysis.

Scanning Electrochemical Microscopy (SECM): Fundamentals and Applications in Life Sciences

In recent years, scanning electrochemical microscopy (SECM) has made significant contributions to the life sciences. Innovative developments focusing on high-resolution imaging, developing novel operation modes, and combining SECM with complementary optical or scanning probe techniques renders SECM an attractive analytical approach. This chapter gives an introduction to the essential instrumentation and operation principles of SECM for studying biologically-relevant systems. Particular emphasis is given to applications aimed at imaging the activity of biochemical constituents such as enzymes, antibodies, and DNA, which play a pivotal role in biomedical diagnostics. Furthermore, the unique advantages of SECM and combined techniques for studying live cells is highlighted by discussion of selected examples.

Electrochemical aptamer/antibody based sandwich immunosensor for the detection of EGFR, a cancer biomarker, using gold nanoparticles as a signaling probe

Detection of epidermal growth factor receptor (EGFR) in biological fluids is of paramount importance, since it has significant application in cancer diagnosis, drug development, and therapy monitoring. EGFR is a cancer biomarker, and its overexpression is associated with the development of some types of cancer. Herein, we report on the development of a sensitive and selective electrochemical aptamer/antibody (Apt/Ab) sandwich immunosensor for detection of EGFR. In this study, a biotinylated anti-human EGFR Apt was immobilized on streptavidin-coated magnetic beads (MB) and served as a capture probe. A polyclonal anti-human EGFR Ab was conjugated to citrate-coated gold nanoparticles (AuNPs) and used as a signaling probe. In the presence of EGFR, an Apt-EGFR-Ab sandwich was formed on the MB surface. The extent of the complexation was evaluated by differential pulse voltammetry of AuNPs after their dissolution in HCl. Under optimal conditions, the dynamic concentration range of the immunosensor for EGFR spanned from 1 to 40 ng/mL, with a low detection limit of 50 pg/mL, and RSD percent of less than 4.2%. The proposed approach takes advantage of sandwich assay for high specificity, MBs for fast separation, and electrochemical method for cost-effective and sensitive detection. In this proof-of-principle study, we demonstrate the potential clinical efficacy of the immunosensor for monitoring of chemotherapy effectiveness in breast cancer samples.

Au nanoparticle decorated resin microspheres: synthesis and application in electrochemical cytosensors for sensitive and selective detection of lung cancer A549 cells

A novel cytosensor that can sensitively differentiate cancer cells from normal ones is prepared by using antibody-decorated resin microspheres.

Electrochemical monitoring of intracellular enzyme activity of single living mammalian cells by using a double-mediator system

We evaluated the intracellular

NAD(P)H

quinone oxidoreductase (NQO) activity of single HeLa cells by using the menadione-ferrocyanide double-mediator system combined with scanning electrochemical microscopy (SECM). The double-mediator system was used to amplify the current response from the intracellular NQO activity and to reduce menadione-induced cell damage. The electron shuttle between the electrode and menadione was mediated by the ferrocyanide/ferricyanide redox couple. Generation of ferrocyanide was observed immediately after the addition of a lower concentration (10 μM) of menadione. The ferrocyanide generation rate was constant for 120 min. At a higher menadione concentration (100 μM), the ferrocyanide generation rate decreased within 30 min because of the cytotoxic effect of menadione. We also investigated the relationship between intracellular reactive oxygen species or glutathione levels and exposure to different menadione concentrations to determine the optimal condition for SECM with minimal invasiveness. The present study clearly demonstrates that SECM is useful for the analysis of intracellular enzymatic activities in single cells with a double-mediator system.

Recent advances in high resolution scanning electrochemical microscopy of living cells--a review

This review discusses advances in the field of high resolution scanning electrochemical microscopy (HR-SECM) and scanning ion conductance microscopy (SICM) to study living cells. Relevant references from the advent of this technique in the late 1980s to most recent contributions in 2012 are presented with special discussion on high resolution images. A clear progress especially within the last 5 years can be seen in the field of HR-SECM. Furthermore, we also concentrate on the intrinsic properties of SECM imaging techniques e.g. different modes of image acquisition, their advantages and disadvantages in imaging living cells and strategies for further enhancement of image resolution, etc. Some of the recent advances of SECM in nanoimaging have also been discussed which may have potential applications in high resolution imaging of cellular processes.

LSI-based amperometric sensor for bio-imaging and multi-point biosensing

We have developed an LSI-based amperometric sensor called "Bio-LSI" with 400 measurement points as a platform for electrochemical bio-imaging and multi-point biosensing. The system is comprised of a 10.4 mm × 10.4 mm CMOS sensor chip with 20 × 20 unit cells, an external circuit box, a control unit for data acquisition, and a DC power box. Each unit cell of the chip contains an operational amplifier with a switched-capacitor type I-V converter for in-pixel signal amplification. We successfully realized a wide dynamic range from ±1 pA to ±100 nA with a well-organized circuit design and operating software. In particular, in-pixel signal amplification and an original program to control the signal read-out contribute to the lower detection limit and wide detection range of Bio-LSI. The spacial resolution is 250 μm and the temporal resolution is 18-125 ms/400 points, which depends on the desired current detection range. The coefficient of variance of the current for 400 points is within 5%. We also demonstrated the real-time imaging of a biological molecule using Bio-LSI. The LSI coated with an Os-HRP film was successfully applied to the monitoring of the changes of hydrogen peroxide concentration in a flow. The Os-HRP-coated LSI was spotted with glucose oxidase and used for bioelectrochemical imaging of the glucose oxidase (GOx)-catalyzed oxidation of glucose. Bio-LSI is a promising platform for a wide range of analytical fields, including diagnostics, environmental measurements and basic biochemistry.