Dielectrophoretic Technique for Measurement of Chemical and Biological Interactions

Microparticle separation using dielectrophoresis-assisted inertial microfluidics: A GPU-accelerated immersed boundary-lattice Boltzmann simulation

In this study, the migration of microparticles towards the inertial equilibrium positions in a straight microchannel with a square cross section in the presence of an inhomogeneous oscillating electric field was examined. The dynamics of microparticles were simulated using the immersed boundary-lattice Boltzmann method of fluid-structure interaction simulation. Moreover, the lattice Boltzmann Poisson solver was applied to calculate the electric field required for calculation of the dielectrophoretic force using the equivalent dipole moment approximation. These numerical methods were implemented on a single GPU coupled with the AA pattern of storing distribution functions in memory to speed up the computationally demanding simulation of microparticles dynamics. In the absence of an electric field, spherical polystyrene microparticles migrate to four symmetric stable equilibrium positions corresponding to the sidewalls of the square cross-sectional microchannel. The equilibrium distance from the sidewall was increased by increasing the particle size. The equilibrium positions near electrodes disappeared and particles migrated to the other equilibrium positions far from the electrodes by the application of the high-frequency oscillatory electric field at voltages beyond a threshold value. Finally, a two-step dielectrophoresis-assisted inertial microfluidics methodology was introduced for particle separation based on the crossover frequencies and the observed threshold voltages of different particles. The proposed method exploited the synergistic effect of dielectrophoresis and inertial microfluidics methods to remove their limitations, allowing the separation of a broad range of polydisperse particle mixtures with a single device in a short time.

Controlled Transport of Individual Microparticles Using Dielectrophoresis

A dielectrophoretic device employing a planar array of microelectrodes is designed for controlled transport of individual microparticles. By exciting the electrodes in sequence, a moving dielectrophoretic force is created that can drag a particle across the electrodes in a straight line. The electrode shapes are designed to counter any lateral drift of the trapped particle during transport. This facilitates single particle transport by creating a narrow two-dimensional corridor for the moving dielectrophoretic force to operate on. The design and analysis processes are discussed in detail. Numerical simulations are performed to calculate the electromagnetic field distribution and the generated dielectrophoretic force near the electrodes. The Langevin equation is used for analyzing the trajectory of a microparticle under the influence of the external forces. The simulations show how the designed electrode geometry produces the necessary lateral confinement required for successful particle transport. Finally, experimental results are presented showing controlled bidirectional linear transport of single polystyrene beads of radius 10 and 5 μm for a distances 840 and 1100 μm, respectively. The capabilities of the proposed platform make it suitable for micro total analysis systems (μTAS) and lab-on-a-chip (LOC) applications.

Silica-anchored cadmium sulfide nanocrystals for the optical detection of copper(II)

A fluorometric assay was developed for the determination of copper(II) ion based on its quenching effect on the green fluorescent probe of SiO₂-anchored CdS nanocrystals (SiO₂/CdS NCs). The fluorescent probe was prepared by a surface ion-directing strategy for homogeneous precipitation of CdS NCs onto the carboxyl-capped SiO₂ core surfaces. In comparison to CdS NCs, the SiO₂/CdS NCs has strong fluorescence emission and good photostability. Moreover, SiO₂/CdS NCs show higher fluorescence selectivity for copper(II) ions than for other common metal ions because copper(II) ions have a strong fluorescence quenching effect on SiO₂/CdS NCs. At excitation/emission wavelengths of 300/516 nm, the resulting fluorescent probe shows wide linear ranges from 0.01 to 2 μM with a detection limit of 6.3 nM for copper(II) ions. The method has been applied to the determination of trace copper(II) ions in tea infusions with satisfactory results. Graphical abstract.

Study on non-bioparticles and Staphylococcus aureus by dielectrophoresis

This article demonstrated a chip device with alternating current (AC) dielectrophoresis (DEP) for separation of non-biological micro-particle and bacteria mixtures. The DEP separation was achieved by a pair of metal electrodes with the shape of radal-interdigital to generate a localized non-uniform AC electric field. The electric field and DEP force were firstly investigated by finite element methods (FEM). The mixed microparticles such as different scaled polystyrene (PS) beads, PS beads with inorganic micro-particles (e.g., ZnO and silica beads) and non-bioparticles with bacterial Staphylococcus aureus (S. aureus) were successfully separated at DEP-on-a-chip by an AC electric field of 20 kHz, 10 kHz and 1 MHz, respectively. The results indicated that DEP trapping can be considered as a potential candidate method for investigating the separation of biological mixtures, and may well prove to have a great impact on in situ monitoring of environmental and/or biological samples by DEP-on-a-chip.

This article demonstrated a chip device with alternating current (AC) dielectrophoresis (DEP) for separation of non-biological micro-particle and bacteria mixtures.

Automated Dielectrophoretic Tweezers-Based Force Spectroscopy System in a Microfluidic Device

We reported an automated dielectrophoretic (DEP) tweezers-based force spectroscopy system to examine intermolecular weak binding interactions, which consists of three components: (1) interdigitated electrodes and micro-sized polystyrene particles used as DEP tweezers and probes inside a microfluidic device, along with an arbitrary function generator connected to a high voltage amplifier; (2) microscopy hooked up to a high-speed charge coupled device (CCD) camera with an image acquisition device; and (3) a computer aid control system based on the LabVIEW program. Using this automated system, we verified the measurement reliability by measuring intermolecular weak binding interactions, such as hydrogen bonds and Van der Waals interactions. In addition, we also observed the linearity of the force loading rates, which is applied to the probes by the DEP tweezers, by varying the number of voltage increment steps and thus affecting the linearity of the force loading rates. This system provides a simple and low-cost platform to investigate intermolecular weak binding interactions.

Biaxial Dielectrophoresis Force Spectroscopy: A Stoichiometric Approach for Examining Intermolecular Weak Binding Interactions

The direct quantification of weak intermolecular binding interactions is very important for many applications in biology and medicine. Techniques that can be used to investigate such interactions under a controlled environment, while varying different parameters such as loading rate, pulling direction, rupture event measurements, and the use of different functionalized probes, are still lacking. Herein, we demonstrate a biaxial dielectrophoresis force spectroscopy (BDFS) method that can be used to investigate weak unbinding events in a high-throughput manner under controlled environments and by varying the pulling direction (i.e., transverse and/or vertical axes) as well as the loading rate. With the BDFS system, we can quantitatively analyze binding interactions related to hydrogen bonding or ionic attractions between functionalized microbeads and a surface within a microfluidic device. Our BDFS system allowed for the characterization of the number of bonds involved in an interaction, bond affinity, kinetic rates, and energy barrier heights and widths from different regimes of the energy landscape.

Characterization of the Stiffness of Multiple Particles Trapped by Dielectrophoretic Tweezers in a Microfluidic Device

Characterization of the stiffness of multiple particles trapped by tweezers-based force spectroscopy is a key step in building simple, high-throughput, and robust systems that can investigate the molecular interactions in a biological process, but the technology to characterize it in a given environment simultaneously is still lacking. We first characterized the stiffness of multiple particles trapped by dielectrophoretic (DEP) tweezers inside a microfluidic device. In this characterization, we developed a method to measure the thermal fluctuations of the trapped multiple particles with DEP tweezers by varying the heights of the particles in the given environment at the same time. Using the data measured in this controlled environment, we extracted the stiffness of the trapped particles and calculated their force. This study not only provides a simple and high-throughput method to measure the trap stiffness of multiple particles inside a microfluidic device using DEP tweezers but also inspires the application of the trapped multiple particles to investigate the dynamics in molecular interactions.

Real-Time Analysis of Cellular Response to Small-Molecule Drugs within a Microfluidic Dielectrophoresis Device

Quantitative detection of the biological properties of living cells is essential for a wide range of purposes, from the understanding of cellular characteristics to the development of novel drugs in nanomedicine. Here, we demonstrate that analysis of cell biological properties within a microfluidic dielectrophoresis device enables quantitative detection of cellular biological properties and simultaneously allows large-scale measurement in a noise-robust and probeless manner. Applying this technique, the static and dynamic biological responses of live B16F10 melanoma cells to the small-molecule drugs such as N-ethylmaleimide (NEM) and [(dihydronindenyl)oxy]alkanoic acid (DIOA) were quantitatively and statistically examined by investigating changes in movement of the cells. Measurement was achieved using subtle variations in dielectrophoresis (DEP) properties of the cells, which were attributed to activation or deactivation of K(+)/Cl(-) cotransporter channels on the cell membrane by the small-molecule drugs, in a microfluidic device. On the basis of quantitative analysis data, we also provide the first report of the shift of the complex permittivity of a cell induced by the small-molecule drugs. In addition, we demonstrate interesting quantifiable parameters including the drug effectiveness coefficient, antagonistic interaction coefficient, kinetic rate, and full width at half-maximum, which corresponded to changes in biological properties of B16F10 cells over time when NEM and DIOA were introduced alone or in combination. Those demonstrated parameters represent very useful tools for evaluating the effect of small-molecule drugs on the biological properties of cells.

Conjugating curcumin to water soluble polymer stabilized gold nanoparticles via pH responsive succinate linker

Drug amended polymer stabilized gold nanoparticles as pH responsive drug delivery nano vehicles.

Dielectrophoresis for bioparticle manipulation

As an ideal method to manipulate biological particles, the dielectrophoresis (DEP) technique has been widely used in clinical diagnosis, disease treatment, drug development, immunoassays, cell sorting, etc. This review summarizes the research in the field of bioparticle manipulation based on DEP techniques. Firstly, the basic principle of DEP and its classical theories are introduced in brief; Secondly, a detailed introduction on the DEP technique used for bioparticle manipulation is presented, in which the applications are classified into five fields: capturing bioparticles to specific regions, focusing bioparticles in the sample, characterizing biomolecular interaction and detecting microorganism, pairing cells for electrofusion and separating different kinds of bioparticles; Thirdly, the effect of DEP on bioparticle viability is analyzed; Finally, the DEP techniques are summarized and future trends in bioparticle manipulation are suggested.

Real-time control of inertial focusing in microfluidics using dielectrophoresis (DEP)

In this work, we explored the possibility of combining dielectrophoresis (DEP) and inertial focusing in a fully coupled manner and proposed a new concept, which is called DEP-inertial microfluidics. A vertical DEP force is used to tune the inertial focusing pattern and position in three dimensions.

Microfluidic multifunctional probe array dielectrophoretic force spectroscopy with wide loading rates

The simultaneous investigation of a large number of events with different types of intermolecular interactions, from nonequilibrium high-force pulling assays to quasi-equilibrium unbinding events in the same environment, can be very important for fully understanding intermolecular bond-rupture mechanisms. Here, we describe a novel dielectrophoretic force spectroscopy technique that utilizes microsized beads as multifunctional probes for parallel measurement of intermolecular forces with an extremely wide range of force rate (10(-4) to 10(4) pN/s) inside a microfluidic device. In our experiments, various forces, which broadly form the basis of all molecular interactions, were measured across a range of force loading rates by multifunctional probes of various diameters with a throughput of over 600 events per mm(2), simultaneously and in the same environment. Furthermore, the individual bond-rupture forces, the parameters for the characterization of entire energy landscapes, and the effective stiffness of the force spectroscopy were determined on the basis of the measured results. This method of determining intermolecular forces could be very useful for the precise and simultaneous examination of various molecular interactions, as it can be easily and cost-effectively implemented within a microfluidic device for a range of applications including immunoassays, molecular mechanics, chemical and biological screening, and mechanobiology.

High density single-molecule-bead arrays for parallel single molecule force spectroscopy

The assembly of a highly parallel force spectroscopy tool requires careful placement of single-molecule targets on the substrate and the deliberate manipulation of a multitude of force probes. Since the probe must approach the target biomolecule for covalent attachment, while avoiding irreversible adhesion to the substrate, the use of polymer microspheres as force probes to create the tethered bead array poses a problem. Therefore, the interactions between the force probe and the surface must be repulsive at very short distances (<5 nm) and attractive at long distances. To achieve this balance, the chemistry of the substrate, force probe, and solution must be tailored to control the probe-surface interactions. In addition to an appropriately designed chemistry, it is necessary to control the surface density of the target molecule in order to ensure that only one molecule is interrogated by a single force probe. We used gold-thiol chemistry to control both the substrate's surface chemistry and the spacing of the studied molecules, through binding of the thiol-terminated DNA and an inert thiol forming a blocking layer. For our single molecule array, we modeled the forces between the probe and the substrate using DLVO theory and measured their magnitude and direction with colloidal probe microscopy. The practicality of each system was tested using a probe binding assay to evaluate the proportion of the beads remaining adhered to the surface after application of force. We have translated the results specific for our system to general guiding principles for preparation of tethered bead arrays and demonstrated the ability of this system to produce a high yield of active force spectroscopy probes in a microwell substrate. This study outlines the characteristics of the chemistry needed to create such a force spectroscopy array.

Use of negative dielectrophoresis for selective elution of protein-bound particles

In this paper with the aid of negative dielectrophoresis force in conjunction with shear force and at an optimal sodium hydroxide concentration we demonstrated a switchlike functionality to elute specifically bound beads from the surface. At an optimal flow rate and sodium hydroxide concentration, negative dielectrophoresis turned on results in bead detachment, whereas when negative dielectrophoresis is off, the beads remain attached. This platform offers the potential for performing a bead-based multiplexed assay where in a single channel various regions are immobilized with a different antibody, each targeting a different antigen. To develop the proof of concept and to demonstrate the switchlike functionality in eluting specifically bound beads from the surface we looked at two different protein interactions. We chose interactions that were in the same order of magnitude in strength as typical antibody-antigen interactions. The first was protein G-IgG interaction, and the second was the interaction between anti-IgG and IgG.

Dielectrophoretic tweezers as a platform for molecular force spectroscopy in a highly parallel format

We demonstrated the application of a simple electrode geometry for dielectrophoresis (DEP) on colloidal probes as a form of molecular force spectroscopy in a highly parallel format. The electric field between parallel plates is perturbed with dielectric microstructures, generating uniform DEP forces on colloidal probes in the range of several hundred piconewtons across a macroscopic sample area. We determined the approximate crossover frequency between negative and positive DEP using electrodes without dielectric microstructures-a simplification over standard experimental methods involving quadrupoles or optical trapping. 2D and 3D simulations of the electric field distributions validated the experimental behavior of several of our DEP tweezers geometries and provided insight into potential improvements. We applied the DEP tweezers to the stretching of a short DNA oligomer and detected its extension using total-internal reflection fluorescence microscopy. The combination of a simple cell fabrication, a uniform distribution of high axial forces, and a facile optical detection of our DEP tweezers makes this form of molecular force spectroscopy ideal for highly parallel detection of stretching or unbinding kinetics of biomolecules.

Microsystems for the capture of low-abundance cells

Efficient selection and enumeration of low-abundance biological cells are highly important in a variety of applications. For example, the clinical utility of circulating tumor cells (CTCs) in peripheral blood is recognized as a viable biomarker for the management of various cancers, in which the clinically relevant number of CTCs per 7.5 ml of blood is two to five. Although there are several methods for isolating rare cells from a variety of heterogeneous samples, such as immunomagnetic-assisted cell sorting and fluorescence-activated cell sorting, they are fraught with challenges. Microsystem-based technologies are providing new opportunities for selecting and isolating rare cells from complex, heterogeneous samples. Such approaches involve reductions in target-cell loss, process automation, and minimization of contamination issues. In this review, we introduce different application areas requiring rare cell analysis, conventional techniques for their selection, and finally microsystem approaches for low-abundance-cell isolation and enumeration.