Recyclable Molecular Trapping and SERS Detection in Silver-Loaded Agarose Gels with Dynamic Hot Spots

In situ electrochemical regeneration of nanogap hotspots for continuously reusable ultrathin SERS sensors

Surface-enhanced Raman spectroscopy (SERS) harnesses the confinement of light into metallic nanoscale hotspots to achieve highly sensitive label-free molecular detection that can be applied for a broad range of sensing applications. However, challenges related to irreversible analyte binding, substrate reproducibility, fouling, and degradation hinder its widespread adoption. Here we show how in-situ electrochemical regeneration can rapidly and precisely reform the nanogap hotspots to enable the continuous reuse of gold nanoparticle monolayers for SERS. Applying an oxidising potential of +1.5 V (vs Ag/AgCl) for 10 s strips a broad range of adsorbates from the nanogaps and forms a metastable oxide layer of few-monolayer thickness. Subsequent application of a reducing potential of -0.80 V for 5 s in the presence of a nanogap-stabilising molecular scaffold, cucurbit[5]uril, reproducibly regenerates the optimal plasmonic properties with SERS enhancement factors ≈106. The regeneration of the nanogap hotspots allows these SERS substrates to be reused over multiple cycles, demonstrating ≈5% relative standard deviation over at least 30 cycles of analyte detection and regeneration. Such continuous and reliable SERS-based flow analysis accesses diverse applications from environmental monitoring to medical diagnostics.

SERS-based pH-Dependent detection of sulfites in wine by hydrogel nanocomposites

Sulfur dioxide (SO2) and sulfites are well-known additives in winemaking due to their preservative properties. Although they can prevent oxidation and inhibit microbial growth, they pose health risks and require limitations on their use. Consequently, the total level of SO2 is regulated and several quantification strategies have been proposed. The approved detection methods require the extraction of SO2 by heating and/or acid treatment. Then, iodine or acid/base titrations are conducted for the detection of liberated SO2. Although these methods can provide sensitive detection of SO2, they are complex, time-consuming, and require sample preparation steps and skilled operators. Thus, to overcome these disadvantages, an easy-to-use method, involving simple sample preparation steps, and offering high sensitivity and selectivity, is desirable. Herein, we introduce a SERS-based strategy for SO2 detection in liquids using hydrogel nanocomposites. The hydrogels are prepared by poly(ethylene glycol) diacrylate (PEGDA) in the presence of gold nanoparticles (AuNPs), acting as the SERS substrate. The use of hydrogels ensures a homogenous signal distribution and an efficient collection of SO2, and drying the hydrogels enhances and stabilizes the obtained SO2 signal. The detection strategy is based on the pH-dependent dissociation of SO2. By adjusting the pH value of wine to 10 through simple dilutions, SO2 can be directly detected in wine, down to 0.4 ppm, well below the regulatory limits. The proposed method allows for sensitive, direct, cost-effective detection of SO2 by eliminating the loss of the gaseous form of the sample and avoids titration-based detection methods.

Plasmonic Nanosensors: Design, Fabrication, and Applications in Biomedicine

Current advances in the fabrication of smart nanomaterials and nanostructured surfaces find wide usage in the biomedical field. In this context, nanosensors based on localized surface plasmon resonance exhibit unprecedented optical features that can be exploited to reduce the costs, analytic times, and need for expensive lab equipment. Moreover, they are promising for the design of nanoplatforms with multiple functionalities (e.g., multiplexed detection) with large integration within microelectronics and microfluidics. In this review, we summarize the most recent design strategies, fabrication approaches, and bio-applications of plasmonic nanoparticles (NPs) arranged in colloids, nanoarrays, and nanocomposites. After a brief introduction on the physical principles behind plasmonic nanostructures both as inherent optical detection and as nanoantennas for external signal amplification, we classify the proposed examples in colloid-based devices when plasmonic NPs operate in solution, nanoarrays when they are assembled or fabricated on rigid substrates, and nanocomposites when they are assembled within flexible/polymeric substrates. We highlight the main biomedical applications of the proposed devices and offer a general overview of the main strengths and limitations of the currently available plasmonic nanodevices.

Stamplike flexible SERS substrate for in-situ rapid detection of thiram residues in fruits and vegetables

A simple and sensitive Surface-Enhanced Raman Spectroscopy (SERS) method for the detection of thiram residues in fruit and vegetable peels is reported. A flexible SERS substrate based on silver nanoparticles in an agar gel has been developed and characterised. Peels of different fruits and vegetables were intentionally contaminated with different amounts of thiram. The analyte was then extracted within few seconds by gentle rubbing the surface with the agar substrate using it as a stamp. The optimum experimental conditions of the developed method were explored. The limit of detection of thiram in the peels of tomato and green pepper was 140 pg/cm². The values achieved for apple was 2 pg/cm². The method presented could be extensively used for the detection of traces of other contaminants on food surfaces and for other relevant applications.

Fabrication and Comparative Quantitative Analysis of Plasmonic-Polymer Nanocomposites as Optical Platforms

Plasmonic-polymer nanocomposites can serve as a multifunctional platform for a wide range of applications such as biochemical sensing and photothermal treatments, where they synergistically benefit from the extraordinary optical properties of plasmonic nanoparticles (NPs) and biocompatible characteristics of biopolymers. The field translation of plasmonic-polymer nanocomposites requires design rules for scalable and reproducible fabrication with tunable and predictable optical properties and achieving the best performance. The optical properties of NPs and the optimal analytical performance of nanocomposites could be affected by many fabrication parameters, but a fundamental understanding of such parameters is still minimal. Herein, we systematically investigated the NP distribution and their optical properties in gold nanostar (GNS)-polymer nanocomposites as a function of GNS concentration, polymer identity, and the method of GNS incorporation into a polymer matrix. We performed a comprehensive analysis of the single-particle scattering spectra of GNS incorporated into agarose gel and chitosan hydrogels via embedding and surface deposition, using dark-field spectroscopy. While relative GNS concentration affects the GNS scattering property distribution in both polymer matrices, chemical interactions between a polymer matrix and GNS is the key determinant of the GNS stability and homogenous distribution in nanocomposites. When GNS are embedded in a polymer matrix and there are stronger chemical interactions between GNS and a polymer, significantly less aggregation and a more homogenous distribution of GNS, which leads to a larger percentage of GNS optical property preservation, were observed at all the concentrations. In a proof-of-concept surface-enhanced Raman spectroscopy (SERS) study, we observed that the SERS detection efficiency is dictated by the analyte accessibility of GNS, which is governed by the polymer matrix porosity, polymer-GNS interactions, and other polymer physical characteristics. This work presents the interplay between key fabrication parameters and foundational design parameters for more predictable and reliable fabrication of plasmonic-polymer nanocomposites as an optical platform.

Electrochemically renewable SERS sensor: A new platform for the detection of metabolites involved in peroxide production

The accurate detection of hydrogen peroxide (H₂O₂)-involved metabolites plays a significant role in the early diagnosis of metabolism-associated diseases, whereas most of current metabolite-sensing systems are often hindered by low sensitivity, interference of coexisting species, or tedious preparation. Herein, an electrochemistry-regenerated surface-enhanced Raman scattering (SERS) sensor was developed to serve as a universal platform for detecting H₂O₂-involved metabolites. The SERS sensor was constructed by modifying newly synthesized 2-mercaptohydroquinone (2-MHQ) molecules on the surface of gold nanoparticles (AuNPs) that were electrochemically predeposited on an ITO electrode. Metabolites were detected through the changes in the SERS spectrum as a result of the reaction of 2-MHQ with H₂O₂ induced by the metabolites. Combining the superiority of SERS fingerprint identification and the specificity of the related enzymatic reactions producing H₂O₂, the designed SERS sensor was highly selective in detecting glucose and uric acid as models of H₂O₂-involved metabolite with limits of detection (LODs) of 0.159 μM and 0.0857 μM, respectively. Moreover, the sensor maintained a high SERS activity even after more than 10 electrochemical regenerations within 2 min, demonstrating its effectiveness for the rapid detection of various metabolites with electrochemistry-driven regulation. Importantly, the presented SERS sensor showed considerable practicability for the detection of metabolites in real serum samples. Accordingly, the SERS sensor is a new detection platform for H₂O₂-involved metabolites detection in biological fluids, which may aid the early diagnosis of metabolism-related diseases.

Strategies for SERS Detection of Organochlorine Pesticides

Organochlorine pesticides (OCPs) embody highly lipophilic hazardous chemicals that are being phased out globally. Due to their persistent nature, they are still contaminating the environment, being classified as persistent organic pollutants (POPs). They bioaccumulate through bioconcentration and biomagnification, leading to elevated concentrations at higher trophic levels. Studies show that human long-term exposure to OCPs is correlated with a large panel of common chronic diseases. Due to toxicity concerns, most OCPs are listed as persistent organic pollutants (POPs). Conventionally, separation techniques such as gas chromatography are used to analyze OCPs (e.g., gas chromatography coupled with mass spectrometry (GC/MS)) or electron capture detection (GC/ECD). These are accurate, but expensive and time-consuming methods, which can only be performed in centralized lab environments after extensive pretreatment of the collected samples. Thus, researchers are continuously fueling the need to pursue new faster and less expensive alternatives for their detection and quantification that can be used in the field, possibly in miniaturized lab-on-a-chip systems. In this context, surface enhanced Raman spectroscopy (SERS) represents an exceptional analytical tool for the trace detection of pollutants, offering molecular fingerprint-type data and high sensitivity. For maximum signal amplification, two conditions are imposed: an efficient substrate and a high affinity toward the analyte. Unfortunately, due to the highly hydrophobic nature of these pollutants (OCPs,) they usually have a low affinity toward SERS substrates, increasing the challenge in their SERS detection. In order to overcome this limitation and take advantage of on-site Raman analysis of pollutants, researchers are devising ingenious strategies that are synthetically discussed in this review paper. Aiming to maximize the weak Raman signal of organochlorine pesticides, current practices of increasing the substrate's performance, along with efforts in improving the selectivity by SERS substrate functionalization meant to adsorb the OCPs in close proximity (via covalent, electrostatic or hydrophobic bonds), are both discussed. Moreover, the prospects of multiplex analysis are also approached. Finally, other perspectives for capturing such hydrophobic molecules (MIPs-molecularly imprinted polymers, immunoassays) and SERS coupled techniques (microfluidics-SERS, electrochemistry-SERS) to overcome some of the restraints are presented.

Highly reusable nanoporous silver sheet for sensitive SERS detection of pesticides

Surface-enhanced Raman spectroscopy (SERS) enables pesticide detection at the point-of-need, but its practical application is limited by expensive and disposable SERS substrates. Here, we report a reusable nanoporous silver (NPAg) sheet for the SERS detection of organochlorine pesticides, aiming to maximize the cost-efficiency of substrate regeneration. The NPAg sheet is prepared by a reduction-induced decomposition method without chemical induced random aggregations. This SERS substrate is sensitive to various analytes regardless of their affinity to a metal surface such as rhodamine B, dichlorodiphenyl-trichloroethane (DDT), and lindane due to its large surface area and the coral rock-like morphology. The SERS signal of lindane, a typical organochlorine pesticide, is identified and quantified with a minimum detectable concentration of 3 × 10^-7 M (87 ppb), which is below the maximum residue limits in various foods set by the regulators across the world. More importantly, after a few minutes of ultrasonic cleaning in water, the NPAg sheet can be reused at least 20 times with a reproducible SERS activity. Furthermore, the NPAg sheet remains stable in terms of its sensitivity and reusability after several months of bare strorage. Therefore, the NPAg sheet as a SERS substrate holds great promise for mass production and convenient applications in low-cost pesticide analysis.

Two-Dimensional Van der Waals Heterostructures for Synergistically Improved Surface-Enhanced Raman Spectroscopy

Surface-enhanced Raman spectroscopy (SERS) is a precise and noninvasive analytical technique that is widely used in chemical analysis, environmental protection, food processing, pharmaceutics, and diagnostic biology. However, it is still a challenge to produce highly sensitive and reusable SERS substrates with a minimum fluorescence background. In this work, we propose the use of van der Waals heterostructures of two-dimensional materials to cover plasmonic metal nanoparticles to solve this challenge. The heterostructures of atomically thin boron nitride (BN) and graphene provide synergistic effects: (1) electrons could tunnel through the atomically thin BN, allowing the charge transfer between graphene and probe molecules to suppress the fluorescence background; (2) the SERS sensitivity is enhanced by graphene via a chemical enhancement mechanism in addition to an electromagnetic field mechanism; and (3) the atomically thin BN protects the underlying graphene and Ag nanoparticles from oxidation during heating for regeneration at 360 °C in the air so that the SERS substrates could be reused. These advances will facilitate wider applications of SERS especially on the detection of fluorescent molecules with higher sensitivity.

Self-assembled "bridge" substance for organochlorine pesticides detection in solution based on Surface Enhanced Raman Scattering

Pesticide residues pose a great threat to human health, and it is an urgent matter to realize fast and accurate detection of pesticide. SERS (Surface Enhanced Raman Scattering), as a nondestructive detection technology, performs a prominent role in fast detection field due to the strong surface plasmon resonance from short range effect between analyte and nanoparticle. Therefore, in order to solve the incompatibility between organochlorine pesticides molecules and noble metal nanoparticles, this paper proposed a concept of "bridge" substances acting as an interconnect function role to achieve a binding model (object-binder-metal (OBM)) and developed a droplet concentration method to enhance Raman signals. Both combination mode of pesticide molecules to bridge molecules and energy transfer of SERS experiment may relate to the compound ring according to the changes of peaks based on surface plasmon resonance. The selectivity and stability of different bridge substances interacting with pesticides molecules were illumined via binding energy of these two substances obtained by DFT calculations. A droplet can capture nanoparticles and analytes, which is conducive to SERS performance. Chloride ions in the solution contribute to rearrangement of nanoparticles and can validly promote surface activation of Ag nanoparticles to improve energy transfer efficiency of plasma resonance, resulting in superior SERS effect.

A review on recent advances in the applications of surface-enhanced Raman scattering in analytical chemistry

This review is focused on recent developments of surface-enhanced Raman scattering (SERS) applications in Analytical Chemistry. The work covers advances in the fabrication methods of SERS substrates, including nanoparticles immobilization techniques and advanced nanopatterning with metallic features. Recent insights in quantitative and sampling methods for SERS implementation and the development of new SERS-based approaches for both qualitative and quantitative analysis are discussed. The advent of methods for pre-concentration and new approaches for single-molecule SERS quantification, such as the digital SERS procedure, has provided additional improvements in the analytical figures-of-merit for analysis and assays based on SERS. The use of metal nanostructures as SERS detection elements integrated in devices, such as microfluidic systems and optical fibers, provided new tools for SERS applications that expand beyond the laboratory environment, bringing new opportunities for real-time field tests and process monitoring based on SERS. Finally, selected examples of SERS applications in analytical and bioanalytical chemistry are discussed. The breadth of this work reflects the vast diversity of subjects and approaches that are inherent to the SERS field. The state of the field indicates the potential for a variety of new SERS-based methods and technologies that can be routinely applied in analytical laboratories.

Atomically Thin Boron Nitride as an Ideal Spacer for Metal-Enhanced Fluorescence

Metal-enhanced fluorescence (MEF) considerably enhances the luminescence for various applications, but its performance largely depends on the dielectric spacer between the fluorophore and plasmonic system. It is still challenging to produce a defect-free spacer having an optimized thickness with a sub-nanometer accuracy that enables reusability without affecting the enhancement. In this study, we demonstrate the use of atomically thin hexagonal boron nitride (BN) as an ideal MEF spacer owing to its multifold advantages over the traditional dielectric thin films. With rhodamine 6G as a representative fluorophore, it largely improves the enhancement factor (up to ∼95 ± 5), sensitivity (10^-8 M), reproducibility, and reusability (∼90% of the plasmonic activity is retained after 30 cycles of heating at 350 °C in air) of MEF. This can be attributed to its two-dimensional structure, thickness control at the atomic level, defect-free quality, high affinities to aromatic fluorophores, good thermal stability, and excellent impermeability. The atomically thin BN spacers could increase the use of MEF in different fields and industries.

Synthesis and Characterization of Tunable, pH-Responsive Nanoparticle-Microgel Composites for Surface-Enhanced Raman Scattering Detection

The synthesis of microgels with pH-tunable swelling leads to adjustable and pH-responsive substrates for surface-enhanced Raman scattering (SERS)-active nanoparticles (NPs). Sterically stabilized and cross-linked latexes were synthesized from random copolymers of styrene (S) and 2-vinylpyridine (2VP). The pH-dependent latex-to-microgel transition and swellability were tuned based on their hydrophobic-to-hydrophilic content established by the S/2VP ratio. The electrostatic loading of polystyrene/poly(2-vinylpyridine) microgels [PS _x P2VP _y (M)] with anions such as tetrachloroaurate (AuCl₄ ^-) and borate-capped Ag NPs was quantified. The PS _x P2VP _y (M) can load ∼0.3 equiv of AuCl₄ ^- and the subsequent photoreduction results in Au NP-loaded PS _x P2VP _y (M) with NPs located throughout the structure. Loading PS _x P2VP _y (M) with borate-capped Ag NPs produces PS _x P2VP _y (M) with NPs located on the surface of the microgels, where the Ag content is set by S/2VP. The pH-responsive SERS activity is also reported for these Ag NP-loaded microgels. Analytical enhancement factors for dissolved crystal violet are high (i.e., 10⁹ to 10¹⁰) and are set by S/2VP. The Ag NP-loaded microgels with ∼80 wt % 2VP exhibited the most stable pH dependent response.

Microchemical Plant in a Liquid Droplet: Plasmonic Liquid Marble for Sequential Reactions and Attomole Detection of Toxin at Microliter Scale

Miniaturizing the continuous multistep operations of a factory into a microchemical plant offers a safe and cost-effective approach to promote high-throughput screening in drug development and enforcement of industrial/environmental safety. While particle-assembled microdroplets in the form of liquid marble are ideal as microchemical plant, these platforms are mainly restricted to single-step reactions and limited to ex situ reaction monitoring. Herein, we utilize plasmonic liquid marble (PLM), formed by encapsulating liquid droplet with Ag nanocubes, to address these issues and demonstrate it as an ideal microchemical plant to conduct reaction-and-detection sequences on-demand in a nondisruptive manner. Utilizing a two-step azo-dye formation as our model reaction, our microchemical plant allows rapid and efficient diazotization of nitroaniline to form diazonium nitrobenzene, followed by the azo coupling of this intermediate with target aromatic compound to yield azo-dye. These molecular events are tracked in situ via SERS measurement through the plasmonic shell and further verified with in silico investigation. Furthermore, we apply our microchemical plant for ultrasensitive SERS detection and quantification of bisphenol A (BPA) with detection limit down to 10 amol, which is 50 000-fold lower than the BPA safety limit. Together with the protections offered by plasmonic shell against external environments, these collective advantages empower PLM as a multifunctional microchemical plant to facilitate small-volume testing and optimization of processes relevant in industrial and research contexts.

Nanoscale Structural Switching of Plasmonic Nanograin Layers on Hydrogel Colloidal Monolayers for Highly Sensitive and Dynamic SERS in Water with Areal Signal Reproducibility

Developing substrates that enable both reproducible and highly sensitive Raman detection of trace amounts of molecules in aqueous systems remains a challenge, although these substrates are crucial in biomedicine and environmental sciences. To address this issue, we report spatially uniform plasmonic nanowrinkles formed by intimate contact between plasmonic nanograins on the surface of colloidal crystal monolayers. The Au or Ag nanograin layers coated on hydrogel colloidal crystal monolayers can reversibly wrinkle and unwrinkle according to changes in the water temperature. The reversible switches are directed by surface structural changes in the colloidal crystal monolayers, while the colloids repeat the hydration-dehydration process. The Au and Ag nanowrinkles are obtained upon hydration, thus enabling the highly reproducible detection of Raman probes in water at the nano- and picomolar levels, respectively, throughout the entire substrate area. Additionally, the reversible switching of the nanostructures in the plasmonic nanograin layers causes reversible dynamic changes in the corresponding Raman signals upon varying the water temperature.

Supramolecular Low-Molecular-Weight Hydrogelator Stabilization of SERS-Active Aggregated Nanoparticles for Solution and Gas Sensing

The potential of surface-enhanced Raman scattering (SERS) spectroscopy in both laboratory and field analyses depends on the reliable formation of so-called SERS hot spots, such as those formed during gold or silver nanoparticle aggregation. Unfortunately such aggregates are not stable in solution because they typically grow until they precipitate. Here we describe the use of low-molecular-weight hydrogels formed through pH-triggered self-assembly that occurs at a rate that well matches the rates of aggregation of Au or Ag colloids, allowing them to be trapped at the SERS-active point in the aggregation process. We show that the colloid-containing gels give SERS signals similar to the parent colloid but are stable over several months. Moreover, lyophilized gels can be stored as dry powders for subsequent use in the analyses of gases and dissolved analytes by contact with either solutions or vapors. The present system shows how the combination of pH-switchable low-molecular-weight gelators and pH-induced colloid aggregation can be combined to make a highly stable, low-cost SERS platform for the detection of volatile organic compounds and the microvolume analysis of solutions.

Particle-Film Plasmons on Periodic Silver Film over Nanosphere (AgFON): A Hybrid Plasmonic Nanoarchitecture for Surface-Enhanced Raman Spectroscopy

Plasmonic systems based on particle-film plasmonic couplings have recently attracted great attention because of the significantly enhanced electric field at the particle-film gaps. Here, we introduce a hybrid plasmonic architecture utilizing combined plasmonic effects of particle-film gap plasmons and silver film over nanosphere (AgFON) substrates. When gold nanoparticles (AuNPs) are assembled on AgFON substrates with controllable particle-film gap distances, the AuNP-AgFON system supports multiple plasmonic couplings from interparticle, particle-film, and crevice gaps, resulting in a huge surface-enhanced Raman spectroscopy (SERS) effect. We show that the periodicity of AgFON substrates and the particle-film gaps greatly affects the surface plasmon resonances, and thus, the SERS effects due to the interplay between multiple plasmonic couplings. The optimally designed AuNP-AgFON substrate shows a SERS enhancement of 233 times compared to the bare AgFON substrate. The ultrasensitive SERS sensing capability is also demonstrated by detecting glutathione, a neurochemical molecule that is an important antioxidant, down to the 10 pM level.

Hollow silver alginate microspheres for drug delivery and surface enhanced Raman scattering detection

Multifunctional silver alginate hydrogel microspheres are assembled via a template assisted approach using calcium carbonate cores.

Plasmonic-polymer hybrid hollow microbeads for surface-enhanced Raman scattering (SERS) ultradetection

Hybrid composites are known to add functionality to plasmonic nanomaterials. Although these substrates can be produced by common synthetic methods, the percentage of metal loaded into the functional material is usually small. Herein, we exploit a phase inversion precipitation method to incorporate large amounts of silver nanoparticles inside the polymeric matrix of polysulfone microbeads. The composite material combines the high SERS activity resulting from the plasmonic coupling of highly interacting nanoparticles and the ability to accumulate analytes of the polysulfone porous support. This allows for the quantitative SERS detection down to the nanomolar level, with a liner response that extends over an impressive concentration range of five orders of magnitude.

Hybrid nanostructures for SERS: materials development and chemical detection

This review focuses on recent developments in hybrid and nanostructured substrates for SERS (surface-enhanced Raman scattering) studies. Thus substrates composed of at least two distinct types of materials, in which one is a SERS active metal, are considered here aiming at their use as platforms for chemical detection in a variety of contexts. Fundamental aspects related to the SERS effect and plasmonic behaviour of nanometals are briefly introduced. The materials described include polymer nanocomposites containing metal nanoparticles and coupled inorganic nanophases. Chemical approaches to tailor the morphological features of these substrates in order to get high SERS activity are reviewed. Finally, some perspectives for practical applications in the context of chemical detection of analytes using such hybrid platforms are presented.

Silver-gelatine bionanocomposites for qualitative detection of a pesticide by SERS

Gelatine based nanocomposites incorporating Ag nanoparticles as a new SERS platform for the detection of diethyldithiocarbamate (EtDTC), aiming controlled release applications.

In situ silver nanoparticles synthesis in agarose film supported on filter paper and its application as highly efficient SERS test stripes

Highly efficient multifunctional agarose SERS test stripes has been fabricated by a convenient facile approach. SERS stripes were found to be highly sensitive, robust, and capable to alleviate the two major drawbacks of filter paper based SERS substrate i.e. the weak adhesion of plasmonic nanoparticles and the diffusion of analyte into the paper surface. The fabricated stripes have been used successfully for the ultra-trace detection of analytes of forensic interest including a dye, pesticide and explosive.

A silver nanoparticle embedded hydrogel as a substrate for surface contamination analysis by surface-enhanced Raman scattering

A surface enhanced Raman scattering (SERS) hydrogel substrate, capable of extracting small amounts of organic species from surfaces of different types of materials with variable roughness, has been fabricated.

Preparation of gold nanoparticles-agarose gel composite and its application in SERS detection

Agarose gel/gold nanoparticles hybrid was prepared by adding gold nanoparticles to preformed agarose gel. Nanocomposite structures and properties were characterized by transmission electron microscopy (TEM), scanning electron microscopy (SEM), and UV-Vis-NIR absorption spectroscopy. Based on the swelling-contraction characteristics of agarose gel and the adjustable localized surface plasmon resonance (LSPR) of the gold nanoparticles, the nanocomposites were used as surface enhanced Raman scattering (SERS) substrate to detect the Raman signal molecules (NBA, MBA, 1NAT). Results revealed that the porous structure of the agarose gel provided a good carrier for the enrichment of the gold nanoparticles. The gold nanoparticles dynamic hot-spot effect arising from the agarose gel contraction loss of water in the air greatly enhanced the Raman signal. Furthermore, the gel could be cleaned with washing solution and recycling could be achieved for Raman detection.

Multifunctional gold-loaded TiO2 thin film: photocatalyst and recyclable SERS substrate

A simple strategy for synthesizing gold-loaded TiO2 thin film (Au/TiO2) for use as multifunctional photocatalyst and recyclable surface-enhanced Raman scattering (SERS) substrate is introduced. Macroporous TiO2 thin film is prepared through the dip-coating method and made the SERS activity by deposition of gold nanoparticles on its surface. Owing to the high photocatalytic activity of TiO2, the substrate can degrade adsorbates into small inorganic molecules under UV irradiation. In this manner, the substrate is able to self-clean and be reused for a new SERS detection cycle. The photodegradation and SERS experimental results show that Au/TiO2 is a good candidate for both photocatalyst and SERS substrate and exhibits high recyclability in the detection of organic pollutants.

Polymeric Hydrogels and Nanoparticles: A Merging and Emerging Field

Hydrogels have had extensive applications in scientific and industrial applications since their invention over 50 years ago. Responsive hydrogels based on temperature, light, and pH stimuli have been developed by changing the chemical components of the matrix structure. On the other hand, metallic nanoparticles of different shapes and sizes have been prepared by physical as well as chemical methods. These inorganic assemblies are currently widely used in the biomedical sciences and engineering fields. Recently, the combined use of hydrogels and nanoparticles in a single entity has gained enormous attention in areas such as catalysts, surface-enhanced Raman scattering, biosensors, and drug delivery. In this review, recent literature describing these technologies is summarized and an outlook on the promising future of this emerging field is provided.

Ordered array of gold semishells on TiO2 spheres: an ultrasensitive and recyclable SERS substrate

Ordered array of Au semishells on TiO(2) spheres with controlled size are prepared by combining the nanosphere self-assembly and atomic layer deposition (ALD). This ordered 2-D structure with designed array of metal nanogaps can be used as an ultrasensitive surface-enhanced Raman scattering (SERS) substrate with high reproducibility and stability. More importantly, the SERS substrates are recyclable, as enabled by their self-cleaning function due to the TiO(2) photocatalytic degradation of the target molecules. The high SERS sensitivity and recyclability are demonstrated by the detection of Rhodamine 6G (R6G) and brilliant cresyl blue (BCB) molecules. As both the nanosphere lithography and ALD are scalable processes, such 2-D ordered substrates may find applications in chemical sensing.

Aqueously dispersed silver nanoparticle-decorated boron nitride nanosheets for reusable, thermal oxidation-resistant surface enhanced Raman spectroscopy (SERS) devices

The impurity-free aqueous dispersions of boron nitride nanosheets (BNNS) allowed the facile preparation of silver (Ag) nanoparticle-decorated BNNS by chemical reduction of an Ag salt with hydrazine in the presence of BNNS. The resultant Ag-BNNS nanohybrids remained dispersed in water, allowing convenient subsequent solution processing. By using substrate transfer techniques, Ag-BNNS nanohybrid thin film coatings on quartz substrates were prepared and evaluated as reusable surface enhanced Raman spectroscopy (SERS) sensors that were robust against repeated solvent washing. In addition, because ofthe unique thermal oxidation-resistant properties of the BNNS, the sensor devices may be readily recycled by short-duration high temperature air oxidation to remove residual analyte molecules in repeated runs. The limiting factor associated with the thermal oxidation recycling process was the Ostwald ripening effect of Ag nanostructures.

Multiple depositions of Ag nanoparticles on chemically modified agarose films for surface-enhanced Raman spectroscopy

A facile and cost-effective approach for the preparation of a surface-enhanced Raman spectroscopy (SERS) substrate through constructing silver nanoparticle/3-aminopropyltriethoxysilane/agarose films (Ag NPs/APTES/Agar film) on various solid supports is described. The SERS performance of the substrate was systematically investigated, revealing a maximum SERS intensity with four layers of the Ag NP deposition. The enhancement factor of the developed substrate was calculated as 1.5 × 10(7) using rhodamine 6G (R6G) as the probe molecule, and the reproducibility of the SERS signals was established. A high throughput screening platform was designed, manufactured and implemented which utilised the ability to cast agarose to assemble arrays. Quantitative analysis of 4-aminobenzoic acid (4-ABA) and 4-aminothiophenol (4-ATP) was achieved over a ∼0.5 nM-0.1 μM range.

Silver nanoparticle-treated filter paper as a highly sensitive surface-enhanced Raman scattering (SERS) substrate for detection of tyrosine in aqueous solution

Highly sensitive SERS substrates based on deposition of silver nanoparticles on commercially available filter paper were prepared in this work, and used to overcome problems found in analyses of aqueous samples. To prepare silver nanoparticle- (AgNP) doped filter substrates, a silver mirror reaction was used. The procedures for substrate preparation were systematically optimized. Pretreatment of filter paper, reaction time, temperature, and concentration of reagents for silver mirror reactions were studied. The morphologies of the resulting substrates were characterized by field-emission scanning electron microscopy (FE-SEM) and correlated with the SERS signals by probing with p-nitrothiophenol (pNTP). Filter papers with different pretreatments were found to have different sizes and distributions of AgNPs. The best performance was found when filter paper was pre-treated with ammonia solution before growth of AgNPs. Based on the SEM images, the resulting AgNPs had roughly spherical shape with a high degree of uniformity. The silver-coated filter paper substrates provide much higher SERS signals compared to glass substrates and the reproducibility was improved significantly. Based on statistical analyses, the relative standard deviations for substrate-to-substrate and spot-to-spot were both were less than 8% and the enhancement factors for the substrates were, in general, higher than 107. The SERS substrates were used to selectively detect tyrosine in aqueous solution. Results indicate that filter-based SERS substrates are highly suited to detection of tyrosine. Compared to glass-based SERS substrates, 50 times more SERS signal was observed in detection of tyrosine. The linear range can be up to 100 μM with a detection limit of 625 nM (SN(-1)=3).

Recyclable SERS substrates based on Au-coated ZnO nanorods

Vertically aligned Au-coated ZnO nanorods (Au-ZnO NRs) were investigated as cheap, efficient and recyclable SERS-active substrates. The ZnO NRs were prepared through a simple, low-temperature hydrothermal route and made SERS-active through deposition of gold nanoislands by sputtering at room temperature. Optimized samples were able to detect methylene blue over a wide range of low concentrations (from 1 × 10(-4) to 1 × 10(-12) M), with good reproducibility. The photocatalytic properties of Au-ZnO NRs were exploited to recycle these substrates through UV-assisted cleaning. The experimental results showed that these substrates are characterized by high reproducibility and long shelf life, which make them promising as SERS platforms for multiple detection of different molecular species.