Ultrasensitive Detection of Trace Protein by Western Blot Based on POLY-Quantum Dot Probes

Functionalizing tetrahedral framework nucleic acids-based nanostructures for tumor in situ imaging and treatment

Timely in situ imaging and effective treatment are efficient strategies in improving the therapeutic effect and survival rate of tumor patients. In recent years, there has been rapid progress in the development of DNA nanomaterials for tumor in situ imaging and treatment, due to their unsurpassed structural stability, excellent material editability, excellent biocompatibility and individual endocytic pathway. Tetrahedral framework nucleic acids (tFNAs), are a typical example of DNA nanostructures demonstrating superior stability, biocompatibility, cell-entry performance, and flexible drug-loading ability. tFNAs have been shown to be effective in achieving timely tumor in situ imaging and precise treatment. Therefore, the progress in the fabrication, characterization, modification and cellular internalization pathway of tFNAs-based functional systems and their potential in tumor in situ imaging and treatment applications were systematically reviewed in this article. In addition, challenges and future prospects of tFNAs in tumor in situ imaging and treatment as well as potential clinical applications were discussed.

Bimodal size distribution immuno-quantum dots for fluorescent western blotting assay with high sensitivity and extended dynamic range

A highly sensitive quantum dot (QD)-based western blot assay with extended dynamic range was developed. Bimodal size distribution QD (BQ) immunoprobes composed of small size single QD (7.3 nm) and big size QD nanobead (QB) (82.9 nm) were employed for fluorescent western blot immunoassay on a membrane. Small size QD immunoprobes contributed to wider dynamic range of assay, while big size QB immunoprobes provided higher detection sensitivity. This BQ-based western blot assay can achieve a wide dynamic range (from 7.8 to 4000 ng IgG) and is nearly as sensitive as commercial available ultrasensitive chemiluminescent methods, just using a simple gel imager with UV light (365 nm) excitation and red light filter (610 nm). The fluorescent signals of BQ western blot were stable for 10 min, while chemiluminescent signals faded after 1 min. Moreover, this BQ immunoprobe was utilized for the detection of housekeeping protein and specific target proteins in complex cell lysate samples. The limit of detection of housekeeping protein is 0.25 μg of cell lysate, and the signal intensities were proportional to loading protein amount in a wide range from 0.61 to 80 μg. We believe that this new strategy of bimodal size distribution nanoparticles can also be expanded for other functional nanoparticle-based biological assays to improve the sensitivity and extend the dynamic range. Graphical abstract.

A pH-based sensor array for the detection and identification of proteins using CdSe/ZnS quantum dots as an indicator

A novel and simple fluorescence sensor array was developed for the detection and identification of proteins using pH buffer solutions as sensing elements.

Methods to Characterize the Oligonucleotide Functionalization of Quantum Dots

Currently, DNA nanotechnology offers the most programmable, scalable, and accurate route for the self-assembly of matter with nanometer precision into 1, 2, or 3D structures. One example is DNA origami that is well suited to serve as a molecularly defined "breadboard", and thus, to organize various nanomaterials such as nanoparticles into hybrid systems. Since the controlled assembly of quantum dots (QDs) is of high interest in the field of photonics and other optoelectronic applications, a more detailed view on the functionalization of QDs with oligonucleotides shall be achieved. In this work, four different methods are presented to characterize the functionalization of thiol-capped cadmium telluride QDs with oligonucleotides and for the precise quantification of the number of oligonucleotides bound to the QD surface. This study enables applications requiring the self-assembly of semiconductor-oligonucleotide hybrid materials and proves the conjugation success in a simple and straightforward manner.

Fabrication of a label-free electrochemical immunosensor using a redox active ferrocenyl dendrimer

An amperometric immunosensor based on a redox active ferrocenyl end-grafted PAMAM dendrimer provides highly sensitive detection of immunoglobulin, down to 2 ng mL⁻¹.

Multiplexed microfluidic blotting of proteins and nucleic acids by parallel, serpentine microchannels

A high-throughput, high-efficiency and straightforward microfluidic blotting method for analyzing proteins and nucleic acids.

Ultrasensitive detection of proteins on Western blots with semiconducting polymer dots

Ultrasensitive fluorescence imaging of proteins on western blots using a bright, compact, and orange-emitting semiconducting polymer dot (CN-PPV) is demonstrated. A detection limit at the single-picogram level in dot blots is achieved; with conventional western blotting, 50 pg of transferrin and trypsin inhibitor after sodium dodecyl sulfate-polyacrylamide gel electrophoresis and transfer onto a polyvinylidene fluoride membrane are detected. This method does not require any additional equipment or time compared with the conventional procedure with traditional fluorescent probes.

Simple and sensitive detection of HBsAg by using a quantum dots nanobeads based dot-blot immunoassay

Simple and sensitive detection of infectious disease at an affordable cost is urgently needed in developing nations. In this regard, the dot blot immunoassay has been used as a common protein detection method for detection of disease markers. However, the traditional signal reporting systems, such as those using enzymes or gold nanoparticles lack sensitivity and thus restrict the application of these methods for disease detection. In this study, we report a simple and sensitive detection method for the detection of infectious disease markers that couples the dot-blot immunoassay with quantum dots nanobeads (QDNBs) as a reporter. First, the QDNBs were prepared by an oil-in-water emulsion-evaporation technique. Because of the encapsulation of several QDs in one particle, the fluorescent signal of reporter can be amplified with QDNBs in a one-step test and be read using a UV lamp obviating the need for complicated instruments. Detection of disease-associated markers in complex mixture is possible, which demonstrates the potential of developing QDNBs into a sensitive diagnostic kit.

Nanoscale superstructures assembled by polymerase chain reaction (PCR): programmable construction, structural diversity, and emerging applications

Polymerase chain reaction (PCR) is an essential tool in biotechnology laboratories and is becoming increasingly important in other areas of research. Extensive data obtained over the last 12 years has shown that the combination of PCR with nanoscale dispersions can resolve issues in the preparation DNA-based materials that include both inorganic and organic nanoscale components. Unlike conventional DNA hybridization and antibody-antigen complexes, PCR provides a new, effective assembly platform that both increases the yield of DNA-based nanomaterials and allows researchers to program and control assembly with predesigned parameters including those assisted and automated by computers. As a result, this method allows researchers to optimize to the combinatorial selection of the DNA strands for their nanoparticle conjugates. We have developed a PCR approach for producing various nanoscale assemblies including organic motifs such as small molecules, macromolecules, and inorganic building blocks, such as nanorods (NRs), metal, semiconductor, and magnetic nanoparticles (NPs). We start with a nanoscale primer and then modify that building block using the automated steps of PCR-based assembly including initialization, denaturation, annealing, extension, final elongation, and final hold. The intermediate steps of denaturation, annealing, and extension are cyclic, and we use computer control so that the assembled superstructures reach their predetermined complexity. The structures assembled using a small number of PCR cycles show a lower polydispersity than similar discrete structures obtained by direct hybridization between the nanoscale building blocks. Using different building blocks, we assembled the following structural motifs by PCR: (1) discrete nanostructures (NP dimers, NP multimers including trimers, pyramids, tetramers or hexamers, etc.), (2) branched NP superstructures and heterochains, (3) NP satellite-like superstructures, (4) Y-shaped nanostructures and DNA networks, (5) protein-DNA co-assembly structures, and (6) DNA block copolymers including trimers and pentamers. These results affirm that this method can produce a variety of chemical structures and in yields that are tunable. Using PCR-based preparation of DNA-bridged nanostructures, we can program the assembly of the nanoscale blocks through the adjustment of the primer intensity on the assembled units, the number of PCR cycles, or both. The resulting structures are highly complex and diverse and have interesting dynamics and collective properties. Potential applications of these materials include chirooptical materials, probe fabrication, and environmental and biomedical sensors.

A one-step homogeneous sandwich immunosensor for Salmonella detection based on magnetic nanoparticles (MNPs) and quantum Dots (QDs)

Simple immuno-magnetic separation tandem fluorescent probes based on quantum dots-antibody (QDs-Ab) were developed to detect Salmonella with sensitivity of 500 cfu mL-1. With two monoclonal antibodies, which recognize different antigenic determinant on the surface of Salmonella, we prepared antibody-coated magnetic nanoparticles (MNPs) and conjugates of QDs-Ab. The immune-magnetic beads were verified with high enrichment efficiency for Salmonella (90%). A sandwich structure formed if the Salmonella solution was mixed together with immune-beads and QDs-Ab, and the fluorescent single from QDs was related to the amount of Salmonella. A linear response between fluorescence intensity and various concentrations of Salmonella (2.5 × 103 to 1.95 × 108 cfu mL-1) were observed with this proposed method. The total assay time for Salmonella was 30 min, and no cross-reaction to other microbial strains, such as Staphylococcus aureus, Escherichia coli (E. coli) and Escherichia coli O157:H7 (E. coli O157:H7), were found using this detection system. All our results showed that the simple homogeneous immunoassay could be applied in Salmonella screening without time-consuming extra-enrichment of bacteria.

Protein supramolecular complex formation by site-specific avidin-biotin interactions

The precise accumulation of protein functions on a nanoscale to fabricate advanced biomaterials has become possible by a bottom-up approach based on molecular self-assembly. The avidin-biotin interaction is widely employed in the design of functional protein self-assemblies. Herein we assessed how the spatial arrangement of the avidin-biotin interaction between protein building blocks affects the formation of a protein supramolecular complex (PSC). The enzymatic site-specific internal labeling of a symmetric protein scaffold, bacterial alkaline phosphatase (AP), with specifically designed biotinylation substrates revealed that the precise positioning of the biotinylation sites on AP and the linker flexibility of the substrate are critical factors for the growth of PSCs in the presence of streptavidin (SA). A potential diagnostic application of the PSCs comprised of AP and SA was demonstrated in an enzyme-linked immunosorbent assay.

Self-assembly of chiral nanoparticle pyramids with strong R/S optical activity

Chirality at the nanometer scale represents one of the most rapidly developing areas of research. Self-assembly of DNA-nanoparticle (NP) hybrids enables geometrically precise assembly of chiral isomers. The concept of a discrete chiral nanostructure of tetrahedral shape and topology fabricated from four different NPs located in the corners of the pyramid is fundamental to the field. While the first observations of optical activity of mixed pyramidal assemblies were made in 2009 (Chen, W.; Nano Lett. 2009, 9, 2153-2159), further studies are difficult without finely resolved optical data for precisely organized NP pyramidal enantiomers. Here we describe the preparation of a family of self-assembled chiral pyramids made from multiple metal and/or semiconductor NPs with a yield as high as 80%. Purposefully made R- and S-enantiomers of chiral pyramids with four different NPs from three different materials displayed strong chiroptical activity, with anisotropy g-factors as high as 1.9 × 10(-2) in the visible spectral range. Importantly, all NP constituents contribute to the chiroptical activity of the R/S pyramids. We were able to observe three different circular dichroism signals in the range of 350-550 nm simultaneously. They correspond to the plasmonic oscillations of gold, silver, and bandgap transitions of quantum dots. Tunability of chiroptical bands related to these transitions is essential from fundamental and practical points of view. The predictability of optical properties of pyramids, the simplicity of their self-assembly in comparison with lithography, and the possibility for polymerase chain reaction-based automation of their synthesis are expected to facilitate their future applications.

Homogeneous immunoassays based on fluorescence emission intensity variations of zinc selenide quantum dot sensors

The fluorescence emission intensity of ZnSe quantum dots (QDs) conjugated to proteins to form QD-based biomolecular sensors increases significantly upon binding of the sensors to target proteins in solution. This phenomenon enables the development of homogeneous, separation-free immunoassays for rapid quantitative detection of proteins in solution. Proof-of-principle assays were developed by dosing a solution containing a biomolecular target with a solution containing the corresponding QD-based sensor and monitoring the changes in the peak fluorescence emission intensity of the QDs. Direct immunoassays for detecting basic fibroblast growth factor (bFGF) and prostate-specific antigen (PSA) in solution were demonstrated using QD-anti-bFGF and QD-anti-PSA sensors. A competitive immunoassay for detecting human serum albumin (HSA) was also demonstrated by dosing samples containing HSA with QD-HSA sensors and free anti-HSA antibodies. The QD-HSA sensors were tested in 1000× diluted human serum and found to be unaffected by interference from other proteins. The lower limit of detection of the assays was equal to the lowest sensor concentration in the solution that can be unambiguously detected, typically less than 1 nM. The dynamic range of the assays was determined by identifying the sensor concentration above which optical interference between QDs affected adversely the observed fluorescence emission intensity. The upper limit of this concentration was 2.5 μM for 4 nm QDs. The ZnSe QD-based sensors were stable and preserved ~80% of their initial peak emission intensity after two months in refrigerated storage. These biosensors have potential applications in rapid sensing of target proteins for emergency and point-of-care diagnostic applications.

Ultrasensitive detection of ferritin in human serum by Western blotting based on quantum dots-labeled avidin-biotin system

Various methods have been applied for serum ferritin detection, however, these methods still have some limitations. Over the last few years, quantum dots (QDs) have become very attractive for immunoassays because of their enormous potentials in ultrasensitive analysis. In this study, a Western blotting method combined with QDs-labeled avidin-biotin system for detecting human serum ferritin was described. Meanwhile, the traditional diaminobenzidine (DAB)-horseradish peroxidase (HRP) method had been compared with the method. The linearity of this QDs-based Western blotting method was from 0.27 to 1.1 ng, and the quantification limit was 0.27 ng, the sensitivity was up to pictogram values. Real serum samples such as hepatoma, thalassemia patient and normal individual sera were analyzed, the analysis results demonstrated that there was significant difference in the concentrations of ferritin between patients and normal individual serum. Furthermore, the recovery of ferritin from the serum samples of patients ranged from 98.15 to 119.67%, and the RSD (relative standard deviation) ranged from 8.73 to 11.61%, the repeatabilities were well within the acceptable range, which revealed that this method is a stable and reproducible method for detecting serum ferritin and have potential application prospect in clinical laboratory of serum ferritin detection.

Fluorescent strip sensor for rapid determination of toxins

Here, we report a simple fluorescent strip sensor based on aptamer-quantum dots technology that can meet toxin monitoring demands using ochratoxin A (OTA) as a model toxin. The limit of the detection (LOD) for the fluorescent strip was 1.9 ng mL(-1), while the time needed for the detection is only 10 min; this conforms to the standards of World Health Organization (WHO) or better. Overall functional parameters are also better than the analogous characteristics of gold nanoparticle strips. High selectivity was maintained as well, making them suitable for the samples with complex solution composition.

Composite of CdTe quantum dots and molecularly imprinted polymer as a sensing material for cytochrome c

A newly designed molecularly imprinted polymer (MIP) material was fabricated and successfully utilized as recognition element to develop a quantum dots (QDs) based MIP-coated composite for selective recognition of the template cytochrome c (Cyt). The composites were synthesized by sol-gel reaction (imprinting process). The imprinting process resulted in an increased affinity of the composites toward the corresponding template. The fluorescence of MIP-coated QDs was stronger quenched by the template versus that of non-imprinted polymer (NIP)-coated QDs, which indicated the composites could recognize the corresponding template. The results of specific experiments further exhibited the recognition ability of the composites. Under optimum conditions, the linear range for Cyt is from 0.97 μM to 24 μM, and the detection limit is 0.41 μM. The new composites integrated the high selectivity of molecular imprinting technology and fluorescence property of QDs and could convert the specific interactions between imprinted cavities and corresponding template to the obvious changes of fluorescence signal. Therefore, a simple and selective sensing system for protein recognition has been realized.