Determination of the compositional distribution of copolymers by frontal analysis continuous capillary electrophoresis

Separation and Characterization of Highly Charged Polyelectrolytes Using Free-Solution Capillary Electrophoresis

The characterization of statistical copolymers of various charge densities remains an important and challenging analytical issue. Indeed, the polyelectrolyte (PE) effective electrophoretic mobility tends to level off above a certain charge density, due to the occurrence of Manning counterion condensation. Surprisingly, we demonstrate in this work that it is possible to get highly resolutive separations of charged PE using free-solution capillary electrophoresis, even above the critical value predicted by the Manning counterion condensation theory. Full separation of nine statistical poly(acrylamide-co-2-acrylamido-2-methylpropanesulfonate) polymers of different charge densities varying between 3% and 100% was obtained by adjusting the ionic strength of the background electrolyte (BGE) in counter electroosmotic mode. Distributions of the chemical charge density could be obtained for the nine PE samples, showing a strong asymmetry of the distribution for the highest-charged PE. This asymmetry can be explained by the different reactivity ratios during the copolymerization. To shed more light on the separation mechanism, effective and apparent selectivities were determined by a systematic study and modeling of the electrophoretic mobility dependence according to the ionic strength. It is demonstrated that the increase in resolution with increasing BGE ionic strength is not only due to a closer matching of the electroosmotic flow magnitude with the PE electrophoretic effective mobility, but also to an increase of the dependence of the PE effective mobility according to the charge density.

Frontal analysis continuous capillary electrophoresis study on the interaction of an amphiphilic alternating copolymer with triton x-100

The interaction of amphiphilic alternating copolymers of sodium maleate and dodecyl vinyl ether (Mal/C12) with a nonionic surfactant, Triton X-100 (TX), was investigated by frontal analysis continuous capillary electrophoresis (FACCE). The binding isotherms obtained from FACCE data were indicative of weak cooperative interaction for all the polymers examined. The cooperative interaction was also analyzed by the Hill model, and the results were compared with the previous results on the interaction of statistical copolymers of sodium 2-acrylamido-2-methylpropanesulfonate and N-dodecylmethacrylamide with TX.

Cooperative binding of nonionic surfactant to hydrophobically modified polyanions as studied by frontal analysis continuous capillary electrophoresis

The binding of a nonionic surfactant, Triton X-100 (TX), to amphiphilic copolymers of sodium 2-(acrylamido)-2-methylpropanesulfonate and N-dodecylmethacrylamide (C12) (p(A/C12(x)), where x denotes the mol % content of C12) was investigated by frontal analysis continuous capillary electrophoresis (FACCE) combined with dynamic light scattering focusing on the effect of the hydrophobe content on the binding in a wide range of x (5-60 mol %). From binding isotherms obtained from FACCE data, the binding was found to be cooperative in the whole range of x. Furthermore, a significant change in the binding behavior, i.e., cooperativity, was found to occur in a relatively narrow range of x (38-50 mol %), which is attributable to a change in the self-association behavior of p(A/C12(x)) in this x range.

Nonaqueous Capillary Electrophoresis−Mass Spectrometry of Synthetic Polymers

In this work, the separation and characterization of ionizable organic polymers nonsoluble in water is carried out using nonaqueous capillary electrophoresis-ion trap mass spectrometry (NACE-MS). The polymers studied are poly(N(epsilon)-trifluoroacetyl-l-lysine) (poly(TFA-Lys)) obtained by ring-opening polymerization of the corresponding N-carboxyanhydride. Different parameters (i.e., liquid sheath nature and flow rate, electrospray temperature, and separation buffer composition) are optimized in order to obtain both an adequate CE separation and a high MS signal of the samples under study. The optimum NACE-MS separation conditions allow the molecular mass characterization of poly(TFA-Lys) up to a degree of polymerization of 38. NACE-MS provides interesting information on the chemical structure of (i). the polymer end groups and (ii). other final byproducts. The MS spectra obtained by using this CE-MS protocol confirm that the polymerization was initiated by the reaction of n-hexylamine (initiator) on the monomer. CE-MS-MS and CE-MS-MS-MS results demonstrate that two different termination reactions occurred during the polymerization process leading to the transformation of the reactive amine end group into a carboxylic or a formyl groups. Byproducts such as 3-hydantoinacetic acid or diketopiperazine were also detected. To our knowledge, this is the first work in which the great possibilities of NACE-MS and NACE-MS(n) for characterizing synthetic polymers are demonstrated.

Capillary electrophoresis of associative diblock copolymers

Water soluble diblock copolymers composed of a long poly(styrene sulfonate) chain (between 200 and 400 monomers) and a short poly(ethylene propylene) or poly(tert.-butylstyrene) hydrophobic end (20-50 monomers) are highly associative and form micelles in aqueous solution. The micelles are composed of a small hydrophobic core and a polyelectrolyte corona, the dimensions of which can be estimated by neutron and light scattering. These physical techniques are, however, not amenable to discriminate easily between the free copolymer and the copolymer micelle. Capillary electrophoresis was implemented in this work as a new and effective tool to investigate the behaviour of such associative copolymer systems. Since the rate of exchange between the micellised and free states is very slow in comparison with the time scale of the electrophoretic process, the electropherograms of the diblock copolymers obtained in plain aqueous borate buffers exhibit two peaks assigned to the two states mentioned above. The identification of the two peaks was first made on the basis of the retention orders of the two peaks equally obtained in similar conditions by size-exclusion chromatography. The copolymer micelles appeared to have a smaller electrophoretic mobility than the free copolymers. This peak assignment is also consistent with the observed ratio of the time-corrected peak areas and peak dispersions. The effects of the copolymer concentration, electric field, temperature and hydroorganic composition of the medium was also studied. Such systems do not exhibit a defined concentration threshold equivalent to a classical critical micelle concentration. Adding methanol to the electrolyte resulted in the progressive loss of baseline return between the two peaks, which might be attributed to a slight increase in the rate of exchange between the two states. Finally, adding a neutral surfactant to the electrolyte at a concentration in excess of its critical micelle concentration resulted in a decrease in the electrophoretic mobility of the peak attributed to the free copoplymer, while the electrophoretic mobility of the copolymer micelle remained unperturbed.

Characterization of synthetic polyelectrolytes by capillary electrophoresis

Capillary electrophoresis in entangled polymer solutions was applied to determine the molecular mass and polydispersity of polyelectrolytes. The separation selectivities of different polyethylene glycols as buffer additive can be correlated to their average molecular mass. A universal curve correlating the selectivity and the molecular mass could be obtained by using the instrinsic viscosity of the polyethylene glycol. The separation of poly(2-vinylpyridine) standards was compared to the separation of poly(4-vinylpyridine) standards. An indirect detection system was developed to characterize the cationic polyelectrolyte polydiallyldimethyl ammonium chloride. Various polymers with oppositely charged groups (polycarboxybetaines) were investigated with respect to structure dependence, pH dependence and molecular mass dependence of interand intramolecular association.