Lifetime of ion-selective electrodes based on charged ionophores

Ion-Selective Potentiometry with Plasma-Initiated Covalent Attachment of Sensing Membranes onto Inert Polymeric Substrates and Carbon Solid Contacts

The physical delamination of the sensing membrane from underlying electrode bodies and electron conductors limits sensor lifetimes and long-term monitoring with ion-selective electrodes (ISEs). To address this problem, we developed two plasma-initiated graft polymerization methods that attach ionophore-doped polymethacrylate sensing membranes covalently to high-surface-area carbons that serve as the conducting solid contact as well as to polypropylene, poly(ethylene-co-tetrafluoroethylene), and polyurethane as the inert polymeric electrode body materials. The first strategy consists of depositing the precursor solution for the preparation of the sensing membranes onto the platform substrates with the solid contact carbon, followed by exposure to an argon plasma, which results in surface-grafting of the in situ polymerized sensing membrane. Using the second strategy, the polymeric platform substrate is pretreated with argon plasma and subsequently exposed to ambient oxygen, forming hydroperoxide groups on the surface. Those functionalities are then used for the initiation of photoinitiated graft polymerization of the sensing membrane. Attenuated total reflection-Fourier transform infrared spectroscopy, water contact angle measurements, and delamination tests confirm the covalent attachment of the in situ polymerized sensing membranes onto the polymeric substrates. Using membrane precursor solutions comprising, in addition to decyl methacrylate and a cross-linker, also 2-(diisopropylamino)ethyl methacrylate as a covalently attachable H+ ionophore and tetrakis(pentafluorophenyl)borate as ionic sites, both plasma-based fabrication methods produced electrodes that responded to pH in a Nernstian fashion, with the high selectivity expected for ionophore-based ISEs.

Covalently attached ionophores extend the working range of potentiometric pH sensors with poly(decyl methacrylate) sensing membranes

The pH working range of solid-contact ion-selective electrodes (ISEs) with plasticizer-free poly(decyl methacrylate) sensing membranes is shown to be expanded by covalent attachment of H+ ionophores to the polymeric membrane matrix. In situ photopolymerization not only incorporates the ionophores into the polymer backbone, but at the same time also attaches the sensing membranes covalently to the underlying inert polymer and nanographite solid contact, minimizing sensor drift and preventing failure by membrane delamination. A new pyridine-based H+ ionophore, 3-(pyridine-3-yl)propyl methacrylate, has lower basicity than trialkylamine ionophores and expands the upper detection limit. This reduces in particular the interference from hydrogen phthalate, which is a common component of commercial pH buffers. Moreover, the lower detection limit is improved by replacing the CH2CH2 spacer of previously reported dialkylaminoethyl methacrylates with a (CH2)10 spacer, which increases its basicity. Notably, for the more basic and highly cation-selective ionophore 10-(diisopropylamino)decyl methacrylate, the extent of counterion interference from hydrogen phthalate shifted the upper detection limit to lower pH by nearly one pH unit when the crosslinker concentration was decreased.

Design Criteria for Nanostructured Carbon Materials as Solid Contacts for Ion-Selective Sensors

The ability to miniaturize ion-selective sensors that enable microsensor arrays and wearable sensor patches for ion detection in environmental or biological samples requires all-solid-state sensors with solid contacts for transduction of an ion activity into an electrical signal. Nanostructured carbon materials function as effective solid contacts for this purpose. They can also contribute to improved potential signal stability, reducing the need for frequent sensor calibration. In this Perspective, the structural features of various carbon-based solid contacts described in the literature and their respective abilities to reduce potential drift during long-term, continuous measurements are compared. These carbon materials include nanoporous carbons with various architectures, carbon nanotubes, carbon black, graphene, and graphite-based solid contacts. The effects of accessibility of ionophores, ionic sites, and other components of an ion-selective membrane to the internal or external carbon surfaces are discussed, because this impacts double-layer capacitance and potential drift. The effects of carbon composition on water-layer formation are also considered, which is another contributor to potential drift during long-term measurements. Recommendations regarding the selection of solid contacts and considerations for their characterization and testing in solid-contact ion-selective electrodes are provided.

New potentiometric PVC membrane electrode for Ferric Reduction Antioxidant Power assay

In this study, a fast, reproducible and simple-to-apply a new potentiometric determination method was developed for the evaluation of iron (III) reducing power (FRAP), one of the antioxidant capacity tests. For this purpose, an all-solid-state contact iron (III)-selective poly vinyl chloride (PVC) membrane electrode (FRAP-PME) has been developed. In the structure of the developed polymeric membrane electrode (PME), Fe(II)-quercetin compound was used as the active ingredient. It was obtained that PME exhibits a linear potentiometric behavior against the concentration change of Fe(III) ion between 1.0 × 10^-1-1.0 × 10^-5 mol L^-1 and the detection limit is 8.0 × 10^-6 molL^-1. PME showed a very rapid potential response (40-45 s) and was found to have a very high selectivity towards Fe(III) ion in the presence of other species that might interfere. The proposed potentiometric method has been successfully applied to evaluate the iron (III) reducing power of plant extracts.

Skin-Interfaced Wearable Sweat Sensors for Precision Medicine

Wearable sensors hold great potential in empowering personalized health monitoring, predictive analytics, and timely intervention toward personalized healthcare. Advances in flexible electronics, materials science, and electrochemistry have spurred the development of wearable sweat sensors that enable the continuous and noninvasive screening of analytes indicative of health status. Existing major challenges in wearable sensors include: improving the sweat extraction and sweat sensing capabilities, improving the form factor of the wearable device for minimal discomfort and reliable measurements when worn, and understanding the clinical value of sweat analytes toward biomarker discovery. This review provides a comprehensive review of wearable sweat sensors and outlines state-of-the-art technologies and research that strive to bridge these gaps. The physiology of sweat, materials, biosensing mechanisms and advances, and approaches for sweat induction and sampling are introduced. Additionally, design considerations for the system-level development of wearable sweat sensing devices, spanning from strategies for prolonged sweat extraction to efficient powering of wearables, are discussed. Furthermore, the applications, data analytics, commercialization efforts, challenges, and prospects of wearable sweat sensors for precision medicine are discussed.

Imprinted-Zeolite-X-Based Sensor for Non-Enzymatic Detection of Blood Glucose by Potentiometry

The development of sensors based on imprinted zeolite X to detect blood glucose through potentiometry was performed. In this study, the sensor was made of a mixture of carbon paste and imprinted zeolite X. Zeolite X was synthesized using a sol–gel-hydrothermal method at a temperature of 100 °C with basic materials of NaAlO2, NaOH, TEOS, and distilled water. The characterization results of XRD showed the presence of specific peaks, which were confirmed with standard zeolite X. Imprinted zeolite X exhibited a 20 times greater adsorption capacity size, and an adsorption efficiency 3 times greater than that of zeolite X. This is thought to be due to the presence of a molecular template within it. The IZ–carbon paste electrode showed optimum performance due to a mass ratio of carbon, paraffin, and imprinted zeolite X of 12:7:1. The electrode performance was expressed by the Nernst factor value of 30 mV/decade, the measuring range of 10−4–10−2 M, the upper detection limit of 1.38 × 10−2 M, and the lower detection limit of 1.28 × 10−4 M, so this electrode can be used for glucose analysis with a normal concentration (70–110 mg/dL or equivalent to 3.8 × 10−3–6.1 × 10−3 M), as well as the glucose concentration of people with diabetes mellitus (>200 mg/dL or about 10−2 M). This electrode showed precision values of 97.14–99.02%, accuracy values of 98.65–99.39%, and electrode response times of 10–13 s. The electrodes showed high stability for more than 5 weeks with 141 uses. The electrodes also showed high selectivity for glucose in the matrix of uric acid, urea, NaCl, and KCl. Therefore, its use as an alternative electrode for routine glucose analysis in the medical field is recommended.

Towards potentiometric detection in nonaqueous media: Evaluation of the impacts of organic solvents on polymeric membrane ion-selective electrodes

Polymeric membrane ion-selective electrodes (ISEs) have been widely used in various fields including clinical diagnosis, environmental monitoring and industrial analysis. Although most samples of analytical interest measured by the ISEs are aqueous solutions, the applications of these electrodes in nonaqueous media are often inevitable. Unfortunately, so far, little has been known about the extent to which the properties of the ISEs could be affected by the organic solvents. Herein, the feasibility for the applications of the polymeric membrane ISEs in nonaqueous media has been investigated. A polymeric membrane Ca²⁺-ISE is chosen as a model of potentiometric sensors. Four typical water miscible organic solvents (three protic solvents: ethanol, acetic acid, and methanol, and one aprotic dipolar solvent: acetonitrile) are used as the representative examples. Experiments show that the aprotic solvent acetonitrile has the strongest destructive ability towards the sensing performance of the ISE in terms of Nernstian slope and selectivity coefficient. Moreover, the effect on the sensing performance depends on the kind of the protic solvent, the immersion time and the polarity of the membrane plasticizer. We believe that the obtained results could promote further applications of the polymeric membrane ISEs in the organic solvent-containing samples, which could significantly extend the application scope of the ISEs.

Solid-Contact pH Sensor with Covalent Attachment of Ionophores and Ionic Sites to a Poly(decyl methacrylate) Matrix

With a view to improving the sensor lifetime, solid-contact ion-selective electrodes (ISEs) were prepared with a plasticizer-free and cross-linked poly(decyl methacrylate) matrix, to which only the ionic sites, only the ionophore, or both the ionic sites and ionophore were covalently attached. In earlier work with covalently attached ionophores or ionic sites, it was difficult to discount the presence of ionophores or ionic site impurities that were not covalently attached to the polymer backbone because the reagents used to introduce the ionophore or ionic sites had high hydrophobicities. In this work, we deliberately chose readily available hydrophilic reagents for the introduction of covalently attached H⁺ ionophores with tertiary amino groups and covalently attached sulfonate groups as ionic sites. This simplified the synthesis and made it possible to thoroughly remove ionophores and ionic sites not covalently attached to the polymer backbone. Our results confirm the expectation that hydrophobic ISE membranes with both covalently attached ionophores and ionic sites have impractically long response times. In contrast, ISEs with either covalently attached H⁺ ionophores or covalently attached ionic sites responded to pH with quick Nernstian responses and high selectivity. Both conventional plasticized poly(vinyl chloride) (PVC)-based ISEs and the new poly(decyl methacrylate) membranes were exposed to 90 °C heat for 2 h, 10% ethanol for 1 day, or undiluted blood serum for 5 days. In all three cases, the poly(decyl methacrylate) ISEs exhibited properties superior to conventional PVC-based ISEs, confirming the advantages of the covalent attachment.

Unintended Changes of Ion-Selective Membranes Composition-Origin and Effect on Analytical Performance

Ion-selective membranes, as used in potentiometric sensors, are mixtures of a few important constituents in a carefully balanced proportion. The changes of composition of the ion-selective membrane, both qualitative and quantitative, affect the analytical performance of sensors. Different constructions and materials applied to improve sensors result in specific conditions of membrane formation, in consequence, potentially can result in uncontrolled modification of the membrane composition. Clearly, these effects need to be considered, especially if preparation of miniaturized, potentially disposable internal-solution free sensors is considered. Furthermore, membrane composition changes can occur during the normal operation of sensors—accumulation of species as well as release need to be taken into account, regardless of the construction of sensors used. Issues related to spontaneous changes of membrane composition that can occur during sensor construction, pre-treatment and their operation, seem to be underestimated in the subject literature. The aim of this work is to summarize available data related to potentiometric sensors and highlight the effects that can potentially be important also for other sensors using ion-selective membranes, e.g., optodes or voltammetric sensors.

An integrated measurement of six response performance indicators for lead ion-selective electrodes and application

A heavy metal ion-selective electrode (ISE) with highly multiple response performances, rather than a high single response performance, is needed urgently for in situ, real-time environmental monitoring. In this study, we present an integrated measurement of six response performance variables such as the response slope, selectivity, dynamical range, detection limit, response time, and lifetime. They are selected and used as the indicators of the quality assessment for Pb²⁺-ISEs. The measurement, named as electrode comprehensive quality index (I_ECQ), is a single number for a given ISE. The comprehensive qualities of 114 Pb²⁺-ISEs reported in the literature were evaluated through the index method. Twenty-one Pb²⁺-ISEs-based polymer membrane with top 3 I_ECQ values for seven different properties have been recommended by evaluating and screening of the electrodes. Five Pb²⁺-ISEs-based polymer membrane with the best single response performance were also provided. The recommended Pb²⁺-ISEs, along with the corresponding Pb²⁺-ISEs with the miniaturized configurations, will provide helpful guideline for the application of Pb²⁺-ISE with highly multiple response performances in real-time environmental monitoring.

Novel surfactant-selective membrane electrode based on polyelectrolyte-surfactant complex

Novel class of active ionophores for surfactant selective electrodes is proposed. PVC membrane doped with polyelectrolyte-surfactant stoichiometric complex is used for ion-selective electrode construction responsive to cetyltrimethyl ammonium bromide and related surfactants. New ionophore is quite stable and completely insoluble in aqueous media in wide range of pH. The electrode displays nearly Nernstian slope in CTAB concentration range 10(-6)-10(-3)M. Polyelectrolyte platform allows to design wide range of different ionophores responsive to cationic organic substances.

Cation-Coordinating Properties of Perfluoro-15-Crown-5

The coordinative properties of perfluoro-15-crown-5 with monocations were investigated using (19)F NMR spectroscopy and ion-selective electrodes with perfluoro-15-crown-5 as the matrix of their sensor membranes and the fluorophilic tetrakis[3,5-bis(perfluorohexyl)phenyl]borate as ion exchanger site. The results show that perfluoro-15-crown-5 interacts weakly but significantly with Na(+) and K(+). Assuming 1:1 stoichiometry, the formal complexation constants were determined to be 5.5 and 1.7 M(-1), respectively. This weak binding is consistent with the strong electron withdrawing nature of the many fluorine atoms in the perfluorocrown ether. While perfluorinated crown ethers have been known to form host-guest complexes with the anions O(2) (-) and F(-) in the gas phase, this is the first study that quantitatively confirms cation binding to a perfluorocrown ether.

A Generalized Model for Apparently “Non-Nernstian” Equilibrium Responses of Ionophore-Based Ion-Selective Electrodes. 1. Independent Complexation of the Ionophore with Primary and Secondary Ions

A generalized model that describes apparently "non-Nernstian" equilibrium responses of ionophore-based ion-selective electrodes (ISEs) is presented. It is formulated for primary and secondary ions of any charges that enter the membrane phase and independently form complexes with the ionophore, respectively. Equations for the phase boundary potential model were solved numerically to obtain whole response curves as a function of the sample activity of the primary ion, and analytical solutions could be obtained for apparently non-Nernstian response sections in these response curves. Ionophore-based ISEs can give three types of apparently non-Nernstian equilibrium responses, i.e., apparently "super-Nernstian", "inverted-Nernstian", and "sub-Nernstian" responses. The values of the response slopes depend on the charge numbers of the primary and secondary ions and on the stoichiometries of their complexes with the ionophore. The theoretical predictions for super-Nernstian responses agree well with the experimental results obtained with ISEs based on acidic ionophores or metalloporphyrin ionophores. Also, theoretical response curves with inverted-Nernstian slopes were found to be similar in character to the pH responses of Ca2+-selective electrodes based on organophosphate ionophores, which have been known to exhibit a so-called "potential dip". The quantitative understanding of apparently non-Nernstian response slopes presented here provides an insight into ionophore-analyte complexation processes in ISE membranes and should be helpful for the design of new ionophores.