Optothermally Assembled Nanostructures

Optically printed plasmonic fiber tip-assisted SERS-based chemical sensing and single biological cell studies

BACKGROUND

Precise localized printing of plasmonic nanoparticles at desired locations can find a plethora of applications in diverse areas, including nanophotonics, nanomedicine, and microelectronics. The focused laser beam-assisted optical printing technique has illustrated its potential for the localized printing of differently shaped plasmonic particles. However, the technique is either time-consuming or often requires focused optical radiation, limiting its practical applications. While the optothermal printing technique has recently emerged as a promising technique for the direct and rapid printing of plasmonic nanoparticles onto transparent substrates at lower laser intensities, its potential to print the plasmonic nanoparticles to the core of the optical fiber platforms and utilize it for biological cell trapping as well as an analytical platform remains unexplored.

RESULTS

Herein, we demonstrate the thermal-convection-assisted printing of the Ag plasmonic nanoparticles from the plasmonic colloidal solution onto the core of single-mode optical fiber and its multi-functional applications. The direct printing of plasmonic structure on the fiber core via the thermal-convection mechanism is devoid of the requirement of any additional chemical ligand to the fiber core. Further, we demonstrated the potential of the developed plasmonic fiber probe as a multifunctional surface-enhanced Raman spectroscopic (SERS) platform for sensing, chemical reaction monitoring, and single-cell studies. The developed SERS fiber probe is found to detect crystal violet in an aqueous solution as low as 100 pM, with a plasmonic enhancement of 107. Additionally, the capability of the fiber-tip platform to monitor the surface plasmon-driven chemical reaction of 4-nitrothiophenol (4NTP) dimerizing into p, p'-dimercaptoazobenzene (DMAB) is demonstrated. Further, the versatility of the fiber probe as an effective platform for opto-thermophoretic trapping of single biological cells such as yeast, along with its Raman spectroscopic studies, is also shown here.

SIGNIFICANCE

In this study, we illustrate for the first time the optothermal direct printing of plasmonic nanoparticles onto the core of a single-mode fiber. Further, the study demonstrates that such plasmonic nanoparticle printed fiber tip can act as a multi-functional analytical platform for optothermally trap biological particles as well as monitoring plasmon-driven chemical reactions. In addition, the plasmonic fiber tip can be used as a cost-effective SERS analytical platform and is thus expected to find applications in diverse areas.

Thermophoresis-Induced Polymer-Driven Destabilization of Gold Nanoparticles for Optically Directed Assembly at Interfaces

The limitations of conventional template-based methods for the deposition of nanoparticle assemblies into defined patterns on solid substrates call for the development of techniques that do not require templates or lithographic masks. The use of optically-induced thermal gradients to drive the migration of colloids toward or away from a laser spot, known as opto-thermophoresis, has shown promise for the low-power trapping and optical manipulation of a variety of colloidal species. However, the printing of colloids using this technique has so far not been established. Herein, a method for the optically directed printing of noble metal nanoparticles, specifically gold nanospheres is reported. The thermophoresis of the polymer polyvinylpyrrolidone and gold nanospheres toward a laser spot led to the deposition of nanoparticle aggregates, capable of serving as surface-enhanced Raman scattering substrates. The influence of heating laser power and the concentrations of polymer, salt, and surfactant on the nanoparticle deposition rate and structure of the printed pattern are studied, showing that a variety of conditions can permit printing, suggesting facile generalization to different nanoparticle compositions, sizes, and shapes. These findings will greatly benefit future efforts for directed nanoparticle assembly, and drive applications in sensing, photothermal heating, and relevant applications in biomedicine and devices.

Surface-Enhanced Raman Spectroscopy and Electrochemistry: The Ultimate Chemical Sensing and Manipulation Combination

One of the lessons we learned from the COVID-19 pandemic is that the need for ultrasensitive detection systems is now more critical than ever. While sensors' sensitivity, portability, selectivity, and low cost are crucial, new ways to couple synergistic methods enable the highest performance levels. This review article critically discusses the synergetic combinations of optical and electrochemical methods. We also discuss three key application fields-energy, biomedicine, and environment. Finally, we selected the most promising approaches and examples, the open challenges in sensing, and ways to overcome them. We expect this work to set a clear reference for developing and understanding strategies, pros and cons of different combinations of electrochemical and optical sensors integrated into a single device.

Nanoalignment by critical Casimir torques

The manipulation of microscopic objects requires precise and controllable forces and torques. Recent advances have led to the use of critical Casimir forces as a powerful tool, which can be finely tuned through the temperature of the environment and the chemical properties of the involved objects. For example, these forces have been used to self-organize ensembles of particles and to counteract stiction caused by Casimir-Liftshitz forces. However, until now, the potential of critical Casimir torques has been largely unexplored. Here, we demonstrate that critical Casimir torques can efficiently control the alignment of microscopic objects on nanopatterned substrates. We show experimentally and corroborate with theoretical calculations and Monte Carlo simulations that circular patterns on a substrate can stabilize the position and orientation of microscopic disks. By making the patterns elliptical, such microdisks can be subject to a torque which flips them upright while simultaneously allowing for more accurate control of the microdisk position. More complex patterns can selectively trap 2D-chiral particles and generate particle motion similar to non-equilibrium Brownian ratchets. These findings provide new opportunities for nanotechnological applications requiring precise positioning and orientation of microscopic objects.

Microfluidic synthesis of nanomaterials for biomedical applications

The field of nanomaterials has progressed dramatically over the past decades with important contributions to the biomedical area. The physicochemical properties of nanomaterials, such as the size and structure, can be controlled through manipulation of mass and heat transfer conditions during synthesis. In particular, microfluidic systems with rapid mixing and precise fluid control are ideal platforms for creating appropriate synthesis conditions. One notable example of microfluidics-based synthesis is the development of lipid nanoparticle (LNP)-based mRNA vaccines with accelerated clinical translation and robust efficacy during the COVID-19 pandemic. In addition to LNPs, microfluidic systems have been adopted for the controlled synthesis of a broad range of nanomaterials. In this review, we introduce the fundamental principles of microfluidic technologies including flow field- and multiple field-based methods for fabricating nanoparticles, and discuss their applications in the biomedical field. We conclude this review by outlining several major challenges and future directions in the implementation of microfluidic synthesis of nanomaterials.

Rotational dynamics of indirect optical bound particle assembly under a single tightly focused laser

The optical binding of many particles has the potential to achieve the wide-area formation of a "crystal" of small materials. Unlike conventional optical binding, where the entire assembly of targeted particles is directly irradiated with light, if remote particles can be indirectly manipulated using a single trapped particle through optical binding, the degrees of freedom to create ordered structures can be enhanced. In this study, we theoretically investigate the dynamics of the assembly of gold nanoparticles that are manipulated using a single trapped particle by a focused laser. We demonstrate the rotational motion of particles through an indirect optical force and analyze it in terms of spin-orbit coupling and the angular momentum generation of light. The rotational direction of bound particles can be switched by the numerical aperture. These results pave the way for creating and manipulating ordered structures with a wide area and controlling local properties using scanning laser beams.

Light-Programmed Bistate Colloidal Actuation Based on Photothermal Active Plasmonic Substrate

Active particles have been regarded as the key models to mimic and understand the complex systems of nature. Although chemical and field-powered active particles have received wide attentions, light-programmed actuation with long-range interaction and high throughput remains elusive. Here, we utilize photothermal active plasmonic substrate made of porous anodic aluminum oxide filled with Au nanoparticles and poly( N -isopropylacrylamide) (PNIPAM) to optically oscillate silica beads with robust reversibility. The thermal gradient generated by the laser beam incurs the phase change of PNIPAM, producing gradient of surface forces and large volume changes within the complex system. The dynamic evolution of phase change and water diffusion in PNIPAM films result in bistate locomotion of silica beads, which can be programmed by modulating the laser beam. This light-programmed bistate colloidal actuation provides promising opportunity to control and mimic the natural complex systems.

Optically Triggered Nanoscale Plasmonic Dynamite

Photons as energy carriers are clean and abundant, which can be conveniently applied for nanoactuation but the response is usually slow with very low energy efficiency/density. Here, we underpin the concept of robust nanoscale plasmonic dynamite by incorporating fullerene (C₆₀). The Au@C₆₀ core-shell nanoparticles can be triggered to explode in nanoscale with synergy of plasmon-enhanced photochemical and photothermal effects. It is suggested that a sensible amount of CO₂ was generated and pressurized in nanometric volume in an extremely short time scale (∼ns), which triggers the nanoexplosion, rendering the ejection of Au NPs at the speed over 300 m/s. The ejection generates extremely large local forces (∼1 μN) with thermomechanical energy efficiency up to ∼30%, which is demonstrated as a powerful nanoengine for controlled mobilization of micro-objects on solid surfaces. Such nanoscale plasmonic dynamite is highly exploitable for different types of nanomachines, which provides a powerful energy source for nanoactuation and nanomigration.

Tunable Strong Coupling in Transition Metal Dichalcogenide Nanowires

Subwavelength optical resonators with spatiotemporal control of light are essential to the miniaturization of optical devices. In this work, chemically synthesized transition metal dichalcogenide (TMDC) nanowires are exploited as a new type of dielectric nanoresonators to simultaneously support pronounced excitonic and Mie resonances. Strong light-matter couplings and tunable exciton polaritons in individual nanowires are demonstrated. In addition, the excitonic responses can be reversibly modulated with excellent reproducibility, offering the potential for developing tunable optical nanodevices. Being in the mobile colloidal state with highly tunable optical properties, the TMDC nanoresonators will find promising applications in integrated active optical devices, including all-optical switches and sensors.

Bubble-pen lithography: Fundamentals and applications: Nanoscience: Special Issue Dedicated to Professor Paul S. Weiss

Developing on-chip functional devices requires reliable fabrication methods with high resolution for miniaturization, desired components for enhanced performance, and high throughput for fast prototyping and mass production. Recently, laser-based bubble-pen lithography (BPL) has been developed to enable sub-micron linewidths, in situ synthesis of custom materials, and on-demand patterning for various functional components and devices. BPL exploits Marangoni convection induced by a laser-controlled microbubble to attract, accumulate, and immobilize particles, ions, and molecules onto different substrates. Recent years have witnessed tremendous progress in theory, engineering, and application of BPL, which motivated us to write this review. First, an overview of experimental demonstrations and theoretical understandings of BPL is presented. Next, we discuss the advantages of BPL and its diverse applications in quantum dot displays, biological and chemical sensing, clinical diagnosis, nanoalloy synthesis, and microrobotics. We conclude this review with our perspective on the challenges and future directions of BPL.

Optical manipulation and assembly of micro/nanoscale objects on solid substrates

Many light-based technologies have been developed to manipulate micro/nanoscale objects such as colloidal particles and biological cells for basic research and practical applications. While most approaches such as optical tweezers are best suited for manipulation of objects in fluidic environments, optical manipulation on solid substrates has recently gained research interest for its advantages in constructing, reconfiguring, or powering solid-state devices consisting of colloidal particles as building blocks. Here, we review recent progress in optical technologies that enable versatile manipulation and assembly of micro/nanoscale objects on solid substrates. Diverse technologies based on distinct physical mechanisms, including photophoresis, photochemical isomerization, optothermal phase transition, optothermally induced surface acoustic waves, and optothermal expansion, are discussed. We conclude this review with our perspectives on the opportunities, challenges, and future directions in optical manipulation and assembly on solid substrates.

Heat-Mediated Optical Manipulation

Progress in optical manipulation has stimulated remarkable advances in a wide range of fields, including materials science, robotics, medical engineering, and nanotechnology. This Review focuses on an emerging class of optical manipulation techniques, termed heat-mediated optical manipulation. In comparison to conventional optical tweezers that rely on a tightly focused laser beam to trap objects, heat-mediated optical manipulation techniques exploit tailorable optothermo-matter interactions and rich mass transport dynamics to enable versatile control of matter of various compositions, shapes, and sizes. In addition to conventional tweezing, more distinct manipulation modes, including optothermal pulling, nudging, rotating, swimming, oscillating, and walking, have been demonstrated to enhance the functionalities using simple and low-power optics. We start with an introduction to basic physics involved in heat-mediated optical manipulation, highlighting major working mechanisms underpinning a variety of manipulation techniques. Next, we categorize the heat-mediated optical manipulation techniques based on different working mechanisms and discuss working modes, capabilities, and applications for each technique. We conclude this Review with our outlook on current challenges and future opportunities in this rapidly evolving field of heat-mediated optical manipulation.

Microfluidic technologies for nanoparticle formation

Functional nanoparticles (NPs) hold immense promise in diverse fields due to their unique biological, chemical, and physical properties associated with size or morphology. Microfluidic technologies featuring precise fluid manipulation have become versatile toolkits for manufacturing NPs in a highly controlled manner with low batch-to-batch variability. In this review, we present the fundamentals of microfluidic fabrication strategies, including mixing-, droplet-, and multiple field-based microfluidic methods. We highlight the formation of functional NPs using these microfluidic reactors, with an emphasis on lipid NPs, polymer NPs, lipid-polymer hybrid NPs, supramolecular NPs, metal and metal-oxide NPs, metal-organic framework NPs, covalent organic framework NPs, quantum dots, perovskite nanocrystals, biomimetic NPs, etc. we discuss future directions in microfluidic fabrication for accelerated development of functional NPs, such as device parallelization for large-scale NP production, highly efficient optimization of NP formulations, and AI-guided design of multi-step microfluidic reactors.

3D trapping of microbubbles by the Marangoni force

In this Letter, we show 3D steady-state trapping and manipulation of vapor bubbles in liquids employing a low-power continuous-wave laser using the Marangoni effect. Light absorption from photodeposited silver nanoparticles on the distal end of a multi-mode optical fiber is used to produce bubbles of different diameters. The thermal effects produced by either the nanoparticles on the fiber tip or the light bulk absorption modulate the surface tension of the bubble wall and creates both longitudinal and transversal forces just like optical forces, effectively creating a 3D potential well. Using numerical simulations, we obtain expressions for the temperature profiles and present analytical expressions for the Marangoni force. In addition, using an array of three fibers with photodeposited nanoparticles is used to demonstrate the transfer of bubbles from one fiber to another by sequentially switching on and off the lasers.