Inorganometallic Photocatalyst for CO2 Reduction

Photocatalytic Conversion of CO2 to Formate/CO by an (η6-para-Cymene)Ru(II) Half-Metallocene Catalyst: Influence of Additives and TiO2 Immobilization on the Catalytic Mechanism and Product Selectivity

The catalytic efficacy of the monobipyridyl (η6-para-Cymene)Ru(II) half-metallocene, [(p-Cym)Ru(bpy)Cl]+ was evaluated in both mixed homogeneous (dye + catalyst) and heterogeneous hybrid systems (dye/TiO2/Catalyst) for photochemical CO2 reduction. A series of homogeneous photolysis experiments revealed that the (p-Cym)Ru(II) catalyst engages in two competitive routes for CO2 reduction (CO2 to formate conversion via RuII-hydride vs CO2 to CO conversion through a RuII-COOH intermediate). The conversion activity and product selectivity were notably impacted by the pKa value and the concentration of the proton source added. When a more acidic TEOA additive was introduced, the half-metallocene Ru(II) catalyst leaned toward producing formate through the RuII-H mechanism, with a formate selectivity of 86%. On the other hand, in homogeneous catalysis with TFE additive, the CO2-to-formate conversion through RuII-H was less effective, yielding a more efficient CO2-to-CO conversion with a selectivity of >80% (TONformate of 140 and TONCO of 626 over 48 h). The preference between the two pathways was elucidated through an electrochemical mechanistic study, monitoring the fate of the metal-hydride intermediate. Compared to the homogeneous system, the TiO2-heterogenized (p-Cym)Ru(II) catalyst demonstrated enhanced and enduring performance, attaining TONs of 1000 for CO2-to-CO and 665 for CO2-to-formate.

Surface Coordination Environment Engineering on PtxCu1-x Alloy Catalysts for the Efficient Photocatalytic Reduction of CO2 to CH4

Alloy catalysts have been reported to be robust in catalyzing various heterogeneous reactions due to the synergistic effect between different metal atoms. In this work, aimed at understanding the effect of the coordination environment of surface atoms on the catalytic performance of alloy catalysts, a series of PtxCu1-x alloy model catalysts supported on anatase-phase TiO2 (PtxCu1-x/Ti, x = 0.4, 0.5, 0.6, 0.8) were developed and applied in the classic photocatalytic CO2 reduction reaction. According to the results of catalytic performance evaluation, it was found that the photocatalytic CO2 reduction activity on PtxCu1-x/Ti showed a volcanic change as a function of the Pt/Cu ratio, the highest CO2 conversion was achieved on Pt0.5Cu0.5/Ti, with CH4 as the main product. Further systematic characterizations and theoretical calculations revealed that the equimolar amounts of Pt and Cu in Pt0.5Cu0.5/Ti facilitated the generation of more Cu-Pt-paired sites (i.e., the higher coordination number of Pt-Cu), which would favor a bridge adsorption configuration of CO2 and facilitate the electron transfer, thus resulting in the highest photocatalytic CO2 reduction efficiency on Pt0.5Cu0.5/Ti. This work provided new insights into the design of excellent CO2 reduction photocatalysts with high CH4 selectivity from the perspective of surface coordination environment engineering on alloy catalysts.

High-Volumetric Density Atomic Cobalt on Multishell ZnxCd1-xS Boosts Photocatalytic CO2 Reduction

The volumetric density of the metal atomic site is decisive to the operating efficiency of the photosynthetic nanoreactor, yet its rational design and synthesis remain a grand challenge. Herein, we report a shell-regulating approach to enhance the volumetric density of Co atomic sites onto/into multishell ZnxCd1-xS for greatly improving CO2 photoreduction activity. We first establish a quantitative relation between the number of shell layers, specific surface areas, and volumetric density of atomic sites on multishell ZnxCd1-xS and conclude a positive relation between photosynthetic performance and the number of shell layers. The triple-shell ZnxCd1-xS-Co1 achieves the highest CO yield rate of 7629.7 μmol g-1 h-1, superior to those of the double-shell ZnxCd1-xS-Co1 (5882.2 μmol g-1 h-1) and single-shell ZnxCd1-xS-Co1 (4724.2 μmol g-1 h-1). Density functional theory calculations suggest that high-density Co atomic sites can promote the mobility of photogenerated electrons and enhance the adsorption of Co(bpy)32+ to increase CO2 activation (CO2 → CO2* → COOH* → CO* → CO) via the S-Co-bpy interaction, thereby enhancing the efficiency of photocatalytic CO2 reduction.

CO2 electroreduction on single atom catalysts: the role of the DFT functional

One key process involving single atom catalysts (SACs) is the electroreduction of CO2 to fuels. The chemistry of SACs differs largely from that of extended catalytic surfaces, presenting an opportunity to improve the ability to activate very stable molecules, such as CO2. In this work, we performed a density functional theory (DFT) study of CO2 activation on a series of SACs, focusing on the role played by the adopted functional in activity predictions. The role of the exchange-correlation functional has been widely investigated in heterogenous catalysts, but it is less explored in SACs. We tested the widely used PBE and the PBE+U corrected functionals against the more robust hybrid PBE0 functional. The results show that PBE is reliable if one is interested in qualitative predictions, but it leads to some inaccuracies in other cases. A possible way to attenuate this effect is by adopting the PBE+U framework, as it gives results that are very similar to PBE0 at an acceptable computational cost. The results of this study further underline the importance of the computational framework adopted in predicting the activity of SACs. The work suggests that one needs to go beyond PBE for quantitative estimates, an important consideration when performing screening and high-throughput calculations.

Antenna Effect in Noble Metal-Free Dye-Sensitized Photocatalytic Systems Enhances CO2 -to-CO Conversion

Dye-sensitized photocatalytic systems (DSPs) have been extensively investigated for solar-driven hydrogen (H2 ) evolution. However, their application in carbon dioxide (CO2 ) reduction remains limited. Furthermore, current solar-driven CO2 -to-CO DSPs typically employ rhenium complexes as catalysts. In this study, we have developed DSPs that incorporate noble metal-free components, specifically a zinc-porphyrin as photosensitizer (PS) and a cobalt-quaterpyridine as catalyst (CAT). Taking a significant stride forward, we have achieved an antenna effect for the first time in CO2 -to-CO DSPs by introducing a Bodipy as an additional chromophore to enhance light harvesting efficiency. The energy transfer from Bodipy to zinc porphyrin resulted in remarkable stability (turn over number (TON)=759 vs. CAT), and high CO evolution activity (42 mmol g-1  h-1 vs. CAT).

Investigation of Interface Characteristics and Physisorption Mechanism in Quantum Dots/TiO2 Composite for Efficient and Sustainable Photoinduced Interfacial Electron Transfer

Owing to their superior stability compared to those of conventional molecular dyes, as well as their high UV-visible absorption capacity, which can be tuned to cover the majority of the solar spectrum through size adjustment, quantum dot (QD)/TiO2 composites are being actively investigated as photosensitizing components for diverse solar energy conversion systems. However, the conversion efficiencies and durabilities of QD/TiO2-based solar cells and photocatalytic systems are still inferior to those of conventional systems that employ organic/inorganic components as photosensitizers. This is because of the poor adsorption of QDs onto the TiO2 surface, resulting in insufficient interfacial interactions between the two. The mechanism underlying QD adsorption on the TiO2 surface and its relationship to the photosensitization process remain unclear. In this study, we established that the surface characteristics of the TiO2 semiconductor and the QDs (i.e., surface defects of the metal oxide and the surface structure of the QD core) directly affect the QD adsorption capacity by TiO2 and the interfacial interactions between the QDs and TiO2, which relates to the photosensitization process from the photoexcited QDs to TiO2 (QD* → TiO2). The interfacial interaction between the QDs and TiO2 is maximized when the shape/thickness-modulated triangular QDs are composited with defect-rich anatase TiO2. Comprehensive investigations through photodynamic analyses and surface evaluation using X-ray photoelectron spectroscopy (XPS), transmission electron microscopy (TEM), and photocatalysis experiments collectively validate that tuning the surface properties of QDs and modulating the TiO2 defect concentration can synergistically amplify the interfacial interaction between the QDs and TiO2. This augmentation markedly improved the efficiency of photoinduced electron transfer from the photoexcited QDs to TiO2, resulting in significantly increased photocatalytic activity of the QD/TiO2 composite. This study provides the first in-depth characterization of the physical adhesion of QDs dispersed on a heterogeneous metal-oxide surface. Furthermore, the prepared QD/TiO2 composite exhibits exceptional adsorption stability, resisting QD detachment from the TiO2 surface over a wide pH range (pH = 2-12) in aqueous media as well as in nonaqueous solvents during two months of immersion. These findings can aid the development of practical QD-sensitized solar energy conversion systems that require the long-term stability of the photosensitizing unit.

Photocatalytic Reduction of CO2 to HCOOH and CO by a Phosphine-Bipyridine-Phosphine Ir(III) Catalyst: Photophysics, Nonadiabatic Effects, Mechanism, and Selectivity

Photocatalytic CO2 reduction is one of the best solutions to solve the global energy crisis and to realize carbon neutralization. The tetradentate phosphine-bipyridine (bpy)-phosphine (PNNP)-type Ir(III) photocatalyst, Mes-IrPCY2, was reported with a high HCOOH selectivity but the photocatalytic mechanism remains elusive. Herein, we employ electronic structure methods in combination with radiative, nonradiative, and electron transfer rate calculations, to explore the entire photocatalytic cycle to either HCOOH or CO, based on which a new mechanistic scenario is proposed. The catalytic reduction reaction starts from the generation of the precursor metal-to-ligand charge transfer (3 MLCT) state. Subsequently, the divergence happens from the 3 MLCT state, the single electron transfer (SET) and deprotonation process lead to the formation of one-electron-reduced species and Ir(I) species, which initiate the reduction reaction to HCOOH and CO, respectively. Interestingly, the efficient occurrence of proton or electron transfer reduces barriers of critical steps. In addition, nonadiabatic transitions play a nonnegligible role in the cycle. We suggest a lower free-energy barrier in the reaction-limiting step and the very efficient SET in 3 MLCT are cooperatively responsible for a high HCOOH selectivity. The gained mechanistic insights could help chemists to understand, regulate, and design photocatalytic CO2 reduction reaction of similar function-integrated molecular photocatalyst.

Copper-Sulfur-Nitrogen Cluster Providing a Local Proton for Efficient Carbon Dioxide Photoreduction

Atomically precise Cu clusters are highly desirable as catalysts for CO2 reduction reaction (CO2 RR), and they provide an appropriate model platform for elaborating their structure-activity relationship. However, an efficient overall photocatalytic CO2 RR with H2 O using assembled Cu-cluster aggregates as single component photocatalyst has not been reported. Herein, we report a stable crystalline Cu-S-N cluster photocatalyst with local protonated N-H groups (denoted as Cu6 -NH). The catalyst exhibits suitable photocatalytic redox potentials, high structural stability, active catalytic species, and a narrow band gap, which account for its outstanding photocatalytic CO2 RR performance under visible light, with ≈100 % selectivity for CO evolution. Remarkably, systematic isostructural Cu-cluster control experiments, in situ infrared spectroscopy, and density functional theory calculations revealed that the protonated pyrimidine N atoms in the Cu6 -NH cluster act as a proton relay station, providing a local proton during the photocatalytic CO2 RR. This efficiently lowers the energy barrier for the formation of the *COOH intermediate, which is the rate-limiting step, efficiently enhancing the photocatalytic performance. This work lays the foundation for the development of atomically precise metal-cluster-based photocatalysts.

Palladium nanoparticles on gallium nitride as a Mott-Schottky catalyst for efficient and durable photoactivation of unactivated alkanes

The direct functionalization of inert C-H bonds has long been a "holy grail" for the chemistry world. In this report, the direct C(sp3)-N bond formation of unactivated alkanes is reported with a GaN based Mott-Schottky catalyst under photocatalytic reaction conditions. Long term stability and reaction efficiency (up to 92%) were achieved with this photocatalyst. The deposition of a Pd co-catalyst on the surface of GaN significantly enhanced the reaction efficiency. Microscopic investigation suggested a remarkable interaction in the Pd/GaN Schottky junction, giving a significant Pd/GaN depletion layer. In addition, density functional theory (DFT) calculations were performed to show the distinct performance of Pd nanoparticles at the atomic level.

Strong Host-Guest Dependence on the Emissive Properties of MOF-5 and [Zn2(BTTB)(DMF)2•(H2O)3]n

3D-[Zn4O(1,4-BDC)3•x(solvent)]n (MOF-5; BDC = 1,4-benzodicarboxylate) and 3D-[Zn2(BTTB)(DMF)2•(H2O)3]n (MOF-D; BTTB = 4,4',4″,4‴-benzene-1,2,4,5-tetrayltetrabenzoate) have been investigated by means of steady-state UV-visible and fluorescence and time-resolved emission spectroscopy, as a function of solvent and power of the excitation irradiation. The low-temperature X-ray structures (173 K) were permitted to locate solvent molecules (here H2O) in the lattice. They were found distributed in the middle in the voids with no evidence of specific interactions (H-bond, coulombic, and dipole-dipole) with the framework. The fluorescence decays of the ligands (ππ* excited state), τF, for the host-guest composites MOF-5@solvent and MOF-D@solvent (solvent = air, MeCN, EtCN, MeOH, EtOH, and DMF) were found bi-exponential (short τF1 (ps), and long τF2 (ns)) with one important feature: upon cooling from 298 to 77 K, MOF-5's τF1 decreases and τF2 increases, while the opposite trend is generally observed in MOF-D. The low values for τF1 (ps) in MOF-5 are associated with the augmented probability of solvent-ligand collisions leading to nonradiative deactivation, which upon cooling to 77 K increases further as the scaffolding contracts. The augmentation in τF2 is readily associated with the increased rigidity of the ligands that are not submitted to this effect (at the surface of the MOF and as pendent groups). For the low emitter MOF-D, the reversed situation is noted but not as clearly due to the uncertainties in the data. Upon increasing the excitation flux, the fluorescence intensity increases linearly with the laser power indicating the absence of singlet-singlet annihilation, inferring the absence of efficient exciton migration. This observation is explained by the small absorptivity coefficients, which leads to a small J spectral overlap between absorption and fluorescence according to the Forster and Dexter theories, and consequently, a small rate for energy migration. This conclusion drastically changes the perception of the photocatalytic mechanism of MOF-5 and other MOFs exhibiting similar absorption features (i.e., no antenna effect).

Mechanistic Insights into Photochemical CO2 Reduction to CH4 by a Molecular Iron-Porphyrin Catalyst

Iron tetraphenylporphyrin complex modified with four trimethylammonium groups (Fe-p-TMA) is found to be capable of catalyzing the eight-electron eight-proton reduction of CO₂ to CH₄ photochemically in acetonitrile. In the present work, density functional theory (DFT) calculations have been performed to investigate the reaction mechanism and to rationalize the product selectivity. Our results revealed that the initial catalyst Fe-p-TMA ([Cl-Fe(III)-LR₄]⁴⁺, where L = tetraphenylporphyrin ligand with a total charge of -2, and R₄ = four trimethylammonium groups with a total charge of +4) undergoes three reduction steps, accompanied by the dissociation of the chloride ion to form [Fe(II)-L^••2-R₄]²⁺. [Fe(II)-L^••2-R₄]²⁺, bearing a Fe(II) center ferromagnetically coupled with a tetraphenylporphyrin diradical, performs a nucleophilic attack on CO₂ to produce the ¹η-CO₂ adduct [CO₂^•--Fe(II)-L^•-R₄]²⁺. Two intermolecular proton transfer steps then take place at the CO₂ moiety of [CO₂^•--Fe(II)-L^•-R₄]²⁺, resulting in the cleavage of the C-O bond and the formation of the critical intermediate [Fe(II)-CO]⁴⁺ after releasing a water molecule. Subsequently, [Fe(II)-CO]⁴⁺ accepts three electrons and one proton to generate [CHO-Fe(II)-L^•-R₄]²⁺, which finally undergoes a successive four-electron-five-proton reduction to produce methane without forming formaldehyde, methanol, or formate. Notably, the redox non-innocent tetraphenylporphyrin ligand was found to play an important role in CO₂ reduction since it could accept and transfer electron(s) during catalysis, thus keeping the ferrous ion at a relatively high oxidation state. Hydrogen evolution reaction via the formation of Fe-hydride ([Fe(II)-H]³⁺) turns out to endure a higher total barrier than the CO₂ reduction reaction, therefore providing a reasonable explanation for the origin of the product selectivity.

Recent Progress in Porphyrin/g-C3N4 Composite Photocatalysts for Solar Energy Utilization and Conversion

Transforming solar energy into chemical bonds is a promising and viable way to store solar energy. Porphyrins are natural light-capturing antennas, and graphitic carbon nitride (g-C₃N₄) is an effective, artificially synthesized organic semiconductor. Their excellent complementarity has led to a growing number of research papers on porphyrin/g-C₃N₄ hybrids for solar energy utilization. This review highlights the recent progress in porphyrin/g-C₃N₄ composites, including: (1) porphyrin molecules/g-C₃N₄ composite photocatalysts connected via noncovalent or covalent interactions, and (2) porphyrin-based nanomaterials/g-C₃N₄ composite photocatalysts, such as porphyrin-based MOF/g-C₃N₄, porphyrin-based COF/g-C₃N₄, and porphyrin-based assembly/g-C₃N₄ heterojunction nanostructures. Additionally, the review discusses the versatile applications of these composites, including artificial photosynthesis for hydrogen evolution, CO₂ reduction, and pollutant degradation. Lastly, critical summaries and perspectives on the challenges and future directions in this field are also provided.

Accumulative Charge Separation in a Modular Quaterpyridine Bridging Ligand Platform and Multielectron Transfer Photocatalysis of π-Linked Dinuclear Ir(III)-Re(I) Complex for CO2 Reduction

Four sterically distorted quaterpyridyl (qpy) ligand-bridged Ir(III)-Re(I) heterometallic complexes (Ir-qpy_mm-Re, Ir-qpy_mp-Re, Ir-qpy_pm-Re, and Ir-qpy_pp-Re), in which the position of the coupling pyridine unit of the two 2,2'-bipyridine ligands was varied (meta (m)- or para (p)-position), pypy_x-py_xpy (x = m and m, qpy_mm; x = m and p, qpy_mp; x = p and m, qpy_pm; x = p and p, qpy_pp), were prepared, along with the fully π-conjugated Ir(III)-[π linker]-Re(I) complexes (π linker = 2,2'-bipyrimidine (bpm), Ir-bpm-Re; π linker = 2,5-di(pyridin-2-yl)pyrazine (dpp), Ir-dpp-Re) to elucidate the electron mediating and accumulative charge separation properties of the bridging π-linker in a bimetallic system (photosensitizer-π linker-catalytic center). From the photophysical and electrochemical studies, it was found that the quaterpyridyl (qpy) bridging ligand (BL), in which the two planar Ir/Re metalated bipyridine (bpy) ligands were connected but slightly canted relative to each other, linking the heteroleptic Ir(III) photosensitizer, [(^piqC^N)₂Ir^III(bpy)]⁺, and catalytic Re(I) complex, (bpy)Re^I(CO)₃Cl, minimized the energy lowering of the qpy BL, which hampers the forward photoinduced electron transfer (PET) process from [(^piqC^N)₂Ir^III(N^N)]⁺ to (N^N)Re^I(CO)₃Cl (E_red1 = -(0.85-0.93) V and E_red2 = -(1.15-1.30) V vs SCE). This result contrasts with the fully π-delocalized bimetallic systems (Ir-bpm-Re and Ir-dpp-Re) that show a significant energy reduction due to the considerable π-extension and deshielding effect caused by the neighboring Lewis acidic metals (Ir and Re) on the electrochemical scale (E_red1 = -0.37 V and E_red2 = -1.02 and -0.99 V vs SCE). Based on a series of anion absorption studies and spectroelectrochemical (SEC) analyses, all Ir(III)-BL-Re(I) bimetallic complexes were found to exist as dianionic form (Ir(III)-[BL]^2--Re(I)) after a fast reductive-quenching process in the presence of excess electron donor. In the photolysis experiment, the four Ir-qpy-Re complexes displayed the reasonable photochemical CO₂-to-CO conversion activities (TON of 366-588 for 19 h) owing to the moderated electronic coupling between two functional Ir(III) and Re(I) centers through the slightly distorted qpy ligand, whereas Ir-bpm-Re and Ir-dpp-Re displayed negligible performances as a result of the strong electronic coupling via π-conjugation between the two functional components resulting in the energetic constraints for PET and an unwanted side reactions competing with the forward processes. These results confirm that the qpy unit can be utilized as an efficient BL platform in π-linked bimetallic systems.

Lead-Decorated Titanium Oxide Compound with a High Performance in Catalytic CO2 Insertion to Epoxides

The CO₂ cycloaddition to epoxides is an efficient method for CO₂ capture and storage, important not only for reducing greenhouse gas emission but also for producing cyclic carbonates, which are valuable industrial materials. In this study, we report a novel high-nuclearity titanium oxide cluster (TOC) inlayed with main-group element Pb²⁺, H₂Ti₁₆Pb₉O₂₄(SA)₁₈(DMF)₁₀(OH₂)₂ (denoted as 1; SA = salicylate; DMF = N,N-dimethylformamide), which has the property of visible-light absorption and has shown high catalytic activities for cycloadditions of CO₂ under visible-light irradiation. The cluster was synthesized in a high yield in a facial solvothermal process. Its structure and electronic structure were characterized by single-crystal X-ray diffraction, density functional theory calculations, and complementary techniques. The cycloaddition reactions were performed under solvent-free conditions. While the catalytic activity due to the Lewis acidity was moderate, visible-light irradiation further folded the reaction rates. The turnover number reached 3400 with a turnover frequency of 120 h^-1. Mechanism studies indicated a synergistic effect of the Lewis acidity and photogenerated charge carriers. The performance of 1 in reversible I₂ uptake was also investigated. This study demonstrates the high potential of heterometal-decorated TOCs in the cost-effective and efficient CO₂ cycloaddition reaction under mild conditions.

Dynamics of Electron Transfers in Photosensitization Reactions of Zinc Porphyrin Derivatives

Photocatalytic systems for CO₂ reduction operate via complicated multi-electron transfer (ET) processes. A complete understanding of these ET dynamics can be challenging but is key to improving the efficiency of CO₂ conversion. Here, we report the ET dynamics of a series of zinc porphyrin derivatives (ZnPs) in the photosensitization reactions where sequential ET reactions of ZnPs occur with a sacrificial electron donor (SED) and then with TiO₂. We employed picosecond time-resolved fluorescence spectroscopy and femtosecond transient absorption (TA) measurement to investigate the fast ET dynamics concealed in the steady-state or slow time-resolved measurements. As a result, Stern-Volmer analysis of fluorescence lifetimes evidenced that the reaction of photoexcited ZnPs with SED involves static and dynamic quenching. The global fits to the TA spectra identified much faster ET dynamics on a few nanosecond-time scales in the reactions of one-electron reduced species (ZnPs^•-) with TiO₂ compared to previously measured minute-scale quenching dynamics and even diffusion rates. We propose that these dynamics report the ET dynamics of ZnPs^•- formed at adjacent TiO₂ without involving diffusion. This study highlights the importance of ultrafast time-resolved spectroscopy for elucidating the detailed ET dynamics in photosensitization reactions.

Multifaceted Excited State Dynamics of Coumarin Dyes Anchored on Al2O3 Film

The co-facially stacked dyes on semiconductor films serve as an alternative model to elucidate the photo-driven exciton dynamics occurring in a molecular assembly. In this study, we report the unique emission properties of coumarin dye adsorbed on the surface of the semiconductor film, measured by ultrafast time-resolved fluorescence. When a rigid coumarin derivative, 7-hydroxycoumarin-3-carboxylic acid (OHCCA), is anchored on the Al₂O₃ film, the dye manifests dual emissions from the two lowest excited states. Various anchoring modes of a carboxylic acid group on the Al₂O₃ surface are invoked to account for the unusual emission process. Additionally, we identified characteristic transition dipole interactions in the well-stacked dye aggregates, which leads to discernible excitonic splitting in the electronic transitions. Femtosecond time-resolved fluorescence reveals that the excimer formation in the aggregate occurs with the time constant of 550 fs. Picosecond time-resolved emission spectra confirm the subsequent structural relaxations of the nascent excimer. The enhanced transition dipole via the electronic coupling between OHCCA and metal oxide can be responsible for the dual emission and the ultrafast excimer formation.

Sustainable Carbon Dioxide Reduction of the P3HT Polymer-Sensitized TiO2/Re(I) Photocatalyst

In this study, a p-type π-conjugated polymer chain, poly(3-hexylthiophene-2,5-diyl) (P3HT), was physically adsorbed onto n-type TiO₂ nanoparticles functionalized with a molecular CO₂ reduction catalyst, (4,4-Y₂-bpy)Re^I(CO)₃Cl (ReP, Y = CH₂PO(OH)₂), to generate a new type of P3HT-heterogenized hybrid system (P3HT/TiO₂/ReP), and its photosensitizing properties were assessed in a heteroternary system for photochemical CO₂ reduction. We found that P3HT immobilization on TiO₂ facilitated photoinduced electron transfer (PET) from photoactivated P3HT* to the n-type TiO₂ semiconductor via rapid interfacial electron injection (∼65 ps) at the P3HT and TiO₂ surface interface (P3HT* → TiO₂). With such effective charge separation, the heterogenization of P3HT onto TiO₂ resulted in a steady electron supply toward the co-adsorbed Re(I) catalyst, attaining durable catalytic activity with a turnover number (TON) of ∼5300 over an extended time period of 655 h over five consecutive photoreactions, without deformation of the adsorbed P3HT polymer. The long-period structural stability of TiO₂-adsorbed P3HT was verified based on a comparative analysis of its photophysical properties before and after 655 h of photolysis. To our knowledge, this conversion activity is the highest reported so far for polymer-sensitized photochemical CO₂ reduction systems. This investigation provides insights and design guidelines for photocatalytic systems that utilize organic photoactive polymers as photosensitizing units.

Boosting Interfacial Charge Transfer with a Giant Internal Electric Field in a TiO2 Hollow-Sphere-Based S-Scheme Heterojunction for Efficient CO2 Photoreduction

The construction of an S-scheme charge transfer pathway is considered to be a powerful way to inhibit charge recombination and maintain photogenerated carriers with high redox capacity to meet the kinetic requirements of the carbon dioxide (CO₂) photoreduction reaction. For an S-scheme heterojunction, an internal electric field (IEF) is regarded as the main driving force for accelerating the interfacial spatial transfer of photogenerated charges. Herein, we designed a TiO₂ hollow-sphere (TH)-based S-scheme heterojunction for efficient CO₂ photoreduction, in which WO₃ nanoparticles (WP) were applied as an oxidation semiconductor to form an intimate interfacial contact with the TH. The S-scheme charge transfer mode driven by a strong IEF for the TH/WP composite was confirmed by in situ X-ray photoelectron spectroscopy and ultraviolet photoelectron spectroscopy. As a result, abundant photogenerated electrons with strong reducing ability would take part in the CO₂ reduction reaction. The combination of surface photovoltage spectra and transient photocurrent experiments disclosed that the IEF intensity and charge separation efficiency of the fabricated TH/WP composite were nearly 16.80- and 1.42-fold higher, respectively, than those of the pure TH. Furthermore, sufficient active sites provided by the hollow-sphere structure also enhanced the kinetics of the catalytic reaction. Consequently, the optimized TH/WP composite showed a peak level of CO production of 14.20 μmol g^-1 in 3 h without the addition of any sacrificial agent. This work provides insights into the kinetic studies of the S-scheme charge transfer pathway for realizing high-performance CO₂ photoreduction.

Solar Energy Catalysis

When it comes to using solar energy to promote catalytic reactions, photocatalysis technology is the first choice. However, sunlight can not only be directly converted into chemical energy through a photocatalytic process, it can also be converted through different energy-transfer pathways. Using sunlight as the energy source, photocatalytic reactions can proceed independently, and can also be coupled with other catalytic technologies to enhance the overall catalytic efficiency. Therefore, sunlight-driven catalytic reactions are diverse, and need to be given a specific definition. We propose a timely perspective for catalytic reactions driven by sunlight and give them a specific definition, namely "solar energy catalysis". The concept of different types of solar energy catalysis, such as photocatalysis, photothermal catalysis, solar cell powered electrocatalysis, and pyroelectric catalysis, are highlighted. Finally, their limitations and future research directions are discussed.

SrTiO3@NiFe LDH core-shell composites for photocatalytic CO2 conversion

A series of core@shell SrTiO₃@NiFe LDH composites (STONFs) were synthesized and their photocatalytic CO₂ reduction performance was studied. The photocatalyst STONF 2 exhibited enhanced CO₂ reduction performance with CO yield of 7.9 μmol g^-1 h^-1. The yield was 25.7 times and 8.8 times higher than that of NiFe LDH and SrTiO₃ respectively, and also higher than most LDH based photocatalysts. Compared with two individual components, STONFs exhibited their combined merits of widened absorption spectrum, higher transportation efficiency and alleviated recombination of e^-/h⁺ pairs. In addition, there were fewer oxygen vacancies in STONF 2 than as-prepared SrTiO₃. Lower oxygen vacancies concentration would increase the opportunity of direct bonding between interface atoms of two components and successively increase the electron transportation and separation. These factors synergistically contributed to enhanced photocatalytic performance. This work will provide new insight for designing complementary multi-component photocatalysis systems.

Selective Photocatalytic CO2 Reduction by Cobalt Dicyanamide

Photocatalytic conversion of CO2 into chemical fuels is a promising approach to tackle carbon emission and global warming. Herein, we promote a cobalt dicyanamide coordination compound, Co-dca, for the first...

FeVO4 nanowires for efficient photocatalytic CO2 reduction

Band structures of the FeVO4 semiconductor were investigated by first-principles calculations, and FeVO4 nanowires can greatly improve the performance of photocatalytic CO2 reduction.